Viveros Attachment LL · C.V. Final Requirements for June 26, 1999 Release And Correction to Final...

ViverosAttachment LL

C.V.Final Requirements for June 26, 1999 Release

AndCorrection to Final Requirements for the June 26 Release

Page LL-1 of 79

Accessible

PACIFIC BELL - “Final Requirements for June 26, 1999 Release”

Date: March 31, 1999

Number: CLECCS99-046

Contact: Pacific Bell Account Manager

This Accessible Letter serves as notification of the Final Requirements for the June 26th

Release. (As a reference, the Initial Requirements Accessible Letter is CLECCS99-018,dated February 17, 1999). All CLECs that plan to pass either manual or mechanical LSRsto Pacific Bell (Pacific) should review these changes. In addition, CLECs that are using ordeveloping to Pacific’s EDI Gateway should review these changes to determine impacts.The final release implementation date is June 26, 1999. For CLECs using EDI, the testingwindow for this Release is June 21, 1999 through June 25, 1999.

Pacific received comments on the Initial Requirements with concerns about the E911NENA Code and E911 Customer Code requirements included in this release. Pacificacknowledges the request from CLECs to either internally derive this information or makethis information optional. A target date cannot be provided at this point in time. PacificBell will include this as part of the 12-Month Development View as dates becomeavailable.

CLECs also responded with a question on the issuance of jeopardy notices. The capabilityto return electronic notification of jeopardies to CLECs who utilize EDI/LEX will bedeployed using a phased-in approach. During this period, CLECs may receive somejeopardies electronically. Specific deployment schedules will be determined andannounced via a subsequent Accessible Letter. If a CLEC determines that it will not beready to accept these notifications electronically at the time of the release, manual



Page LL-2 of 79

jeopardy notifications can continue to be sent on an interim basis. CLECs with thisconcern should notify their Account Manager to work out a schedule.

The Change Log and the Detailed Requirements are on our CLEC website at:http://info.sbc.com/lwc. Once there, click on:• Customer Handbook• California• User Guide.

On the left of the screen is the table of contents and the requirements for the Release. Justclick on the one you want.

As stated in the Change Management Process meeting on February 17, 1999, Pacific Bellis invoking the Exception Process for this release. Issues regarding either the releasecontent or release date should be directed to your Account Manager.

Attachment



Page LL-3 of 79

New /Previous /Revised /DeletedNotification

Form SECTION FIELD NAME DESCRIPTION

1. Previous

All ADMINISTRATIVE; DSR FORMS:FIELD #2 END USER; LS; LSW/ NP; NP;RESALE; PORT; DLFORMS: FIELD #1 PON

Change: NOTE #1 From: The Purchase Order Number may bereused after two years from the completiondate of the original request. To: The Purchase Order Number may notbe reused.

2. New Admin End User

7 8

74 / Contact Tel No 84 / Imp. Tel No 87 / Alt Imp. Tel No 91 / Des Tel No. 24 / LCON Tel No 47 / BillCon Tel No

CHANGE: * Data Characteristics: Old Data: 17 alpha/numeric characters(including 3 preprinted hyphens) New Data: 14 numeric characters

3. New Admin End User LOOP LOOP W/ NP NP Resale

7 8 9 10 11 12

76 / Contact Fax No 92 / Design Fax No 50 / Disc # 28 / Disc # 31 / TC TO PRI 32 / TC TO SEC 12 / LRN 30 / Ported # 32 / CFTN 41 / TC TO PRI 42 / TC TO SEC 11 / LRN 14 / Ported # 16 / CFTN 25 / TC TO PRI 26 / TC TO SEC 14 / TN




Page LL-4 of 79



PORT DL

13 14

15 / OTN 31 / TC TO PRI 32 / TC TO SEC 13 / TN 14 / OTN 23 / TC TO PRI 24 / TC TO SEC 19 / LTN

4. New Forms Provided 1.3 DELETE: * “Hyphens will be used for paper orderingand not for EDI.” Information concerning use of hyphens forEDI ordering can be found in Section 4.

5. Previous

Intro 2.6a / 2.6b DSR / DL Change: Change “Directory Service can only beordered electronically as part of a RESALEOrder” to “Directory Service can be orderedas part of a LSR”. Delete: Directory Services for UNE products mustbe submitted directly through the listingsgateway.

6. New FormDescriptions

3.0 CHANGE: * 3.1 from “Apptime - Appointment Time” to“Field, Matrixes and ConditionalDefinitions”.

7. New FormDescription

3.0 CHANGE: * Example from field number 13.

8. New Table OfContents

3.1 CHANGE: *



Page LL-5 of 79



3.1 description should read “ConditionalUsage - Examples”

9. Previous

Intro 3.2 REQUEST TYPE &ACTIVITY

Add: ( J ) Listings Only

10. New Act Definitions 3.4 Change: Conversion of Service to a new CLEC: from The CLEC can - Change ServiceAddress (UNE only) to The CLEC cannot - Change ServiceAddress

11. Previous

Intro 3.5 FORMREQUIREMENTSMATRIX

Change: Change DL and DSR Forms for REQTYPA, B, C, F and M / ACT N, C, D, R and Vfrom Prohibited to Optional. Change DL and DSR Forms for REQTYPM / ACT T from Prohibited to Optional. Add: REQTYP J matrix: DL and DSR areRequired for Record Activity. All otherREQTYP / ACT Type combinations areProhibited.

12. New Notifications 5.0 CHANGE: * Add notification forms previously includedin section 5.0 (omitted from ElectronLSOR). Notification forms will be inAppendix C.

13. Previous

Intro 5.0 PACIFIC BELL /NEVADA BELLNOTIFICATIONS

Delete: First paragraph: For Loop with Port(REQTYP ‘M’), when service is California



Page LL-6 of 79



and Loop Start is requested on order, referto section 5.8 for a list of notifications anderror message codes. This is an interimprocess for orders submitted via LEX andFAX.

14. New CompletionNotifications

5.3 CHANGE: * RT Field Name description to “ResponseType”.

15. Revised

Intro 5.4 MISSEDCOMMITMENTS /JEOPARDYNOTIFICATIONS

Delete: Resale Missed Commitments Add: The Jeopardy Notification process forUNE/RESALE will be initiated in thisrelease. If a jeopardy condition shouldoccur on an LSR received mechanically(via EDI or LEX); Pacific Bell / NevadaBell will mechanically send a notification(via EDI or LEX) to the CLEC advising ofa possible delay. This information will beutilizing the coding/fields defined inEDI9/LSOG 3. The individual fieldsreturned are listed in the attached detailedinformation. Added additional error messages.

16. Previous

Intro 5.8 LOOP W/ PORTNOTIFICATIONS(INTERIM)

Delete: Delete Section 5.8

17. New Intro 5.8 Listings Error Codes ADD: Listings error codes / messages as section5.8.

18. New Admin 7 8 / ATN CHANGE: * Data Characteristics



Page LL-7 of 79



Old Data: 1 alpha character or 12alpha/numeric characters (12alpha/numeric includes two hyphens) New Data: 1 alpha character or 10 numericcharacters Update examples to reflect that hyphens arenot part of the data characteristics

19. New Admin 7 11 / D/TSENT CHANGE: * Data Characteristics: Old Data: 17 alpha / numeric characters(including 3 preprinted hyphens) New Data: 14 alpha / numeric characters Update examples to reflect that hyphens arenot part of the data characteristics

20. Previous

Admin 7 43 / SECNCI Change: REQTYP A and B / ACT D fromConditional to Not Applicable.

21. Revised

Admin 7 100 / REMARKS CHANGE: Reformat REMARKS section. Show examples by REQTYP.

22. Revised

Admin 7 100 / REMARKS ADD: ECC (E-911 Customer Code assigned byCLEC) Valid entry is /ECC=XXX

23. Previous

Admin 7 100 / REMARKS ADD: NENA (National Emergency Numbering



Page LL-8 of 79



Association identifier for CLEC). Valid entry is /NENAID=XXXXX

24. Revised

End User 8 8 / NAME CHANGE: REQTYP ‘F’ and ‘M’ / ACT Type ‘R’ and‘D’ from optional to conditional.

25. Revised

End User 8 10 / SANO DELETE: Note 2: For REQTYP ‘E’, if LUC (ListingsUpdate Code) equals ‘Y’, then ServiceAddress information is required. NOTE 3: For ACT Types ‘C’, ‘D’, ‘R’, ‘S’and ‘B’, these fields are optional for serviceaddress information and will be listed asoptional in the matrix for each serviceaddress field. However, if any of thesefields are populated, they are subject to thesame conditional rules as stated in eachfield condition for ACT Types ‘N’, ‘T’, ‘V’and ‘W’. ADD: New Note: If service address information isentered for any REQTYP / ACT Typecombination, then all service address rulesapply. ADD: CONDITION 3: If ACT Type equals C, Dor R, Conditions 1 and 2 apply when CITY(EU field 20) is populated, otherwise thisfield is optional for these ACT Types.



Page LL-9 of 79



26. Revis

ed End User 8 11 / SASF

DELETE: Note 2: For REQTYP ‘E’, if LUC (ListingsUpdate Code) equals ‘Y’, then ServiceAddress information is required. NOTE 3: For ACT Types ‘C’, ‘D’, ‘R’, ‘S’and ‘B’, these fields are optional for serviceaddress information and will be listed asoptional in the matrix for each serviceaddress field. However, if any of thesefields are populated, they are subject to thesame conditional rules as stated in eachfield condition for ACT Types ‘N’, ‘T’, ‘V’and ‘W’. ADD: New Note: If service address information isentered for any REQTYP / ACT Typecombination, then all service address rulesapply. ADD: CONDITION 2: If ACT Type equals C, Dor R, Condition 1 applies when CITY (EUfield 20) is populated, otherwise this field isoptional for these ACT Types.

27. Revised

End User 8 12 / SASD DELETE: Note 2: For REQTYP ‘E’, if LUC (Listings



Page LL-10 of 79



Update Code) equals ‘Y’, then ServiceAddress information is required. NOTE 3: For ACT Types ‘C’, ‘D’, ‘R’, ‘S’and ‘B’, these fields are optional for serviceaddress information and will be listed asoptional in the matrix for each serviceaddress field. However, if any of thesefields are populated, they are subject to thesame conditional rules as stated in eachfield condition for ACT Types ‘N’, ‘T’, ‘V’and ‘W’. ADD: New Note: If service address information isentered for any REQTYP / ACT Typecombination, then all service address rulesapply. ADD: CONDITION 2: If ACT Type equals C, Dor R, Condition 1 applies when CITY (EUfield 20) is populated, otherwise this field isoptional for these ACT Types.

28. Revised

End User 8 13 / SASN DELETE: Note 2: For REQTYP ‘E’, if LUC (ListingsUpdate Code) equals ‘Y’, then ServiceAddress information is required. NOTE 3: For ACT Types ‘C’, ‘D’, ‘R’, ‘S’and ‘B’, these fields are optional for serviceaddress information and will be listed asoptional in the matrix for each serviceaddress field. However, if any of these



Page LL-11 of 79



fields are populated, they are subject to thesame conditional rules as stated in eachfield condition for ACT Types ‘N’, ‘T’, ‘V’and ‘W’. ADD: New Note: If service address information isentered for any REQTYP / ACT Typecombination, then all service address rulesapply. ADD: CONDITION 2: If ACT Type equals C, Dor R, Condition 1 applies when CITY (EUfield 20) is populated, otherwise this field isoptional for these ACT Types.

29. Revised

End User 8 14 / SATH DELETE: Note 2: For REQTYP ‘E’, if LUC (ListingsUpdate Code) equals ‘Y’, then ServiceAddress information is required. NOTE 3: For ACT Types ‘C’, ‘D’, ‘R’, ‘S’and ‘B’, these fields are optional for serviceaddress information and will be listed asoptional in the matrix for each serviceaddress field. However, if any of thesefields are populated, they are subject to thesame conditional rules as stated in eachfield condition for ACT Types ‘N’, ‘T’, ‘V’and ‘W’. ADD: New Note: If service address information is



Page LL-12 of 79



entered for any REQTYP / ACT Typecombination, then all service address rulesapply. ADD: CONDITION 2: If ACT Type equals C, Dor R, Condition 1 applies when CITY (EUfield 20) is populated, otherwise this field isoptional for these ACT Types.

30. Revised

End User 8 20 / CITY DELETE: Note 2: For REQTYP ‘E’, if LUC (ListingsUpdate Code) equals ‘Y’, then ServiceAddress information is required. NOTE 3: For ACT Types ‘C’, ‘D’, ‘R’, ‘S’and ‘B’, these fields are optional for serviceaddress information and will be listed asoptional in the matrix for each serviceaddress field. However, if any of thesefields are populated, they are subject to thesame conditional rules as stated in eachfield condition for ACT Types ‘N’, ‘T’, ‘V’and ‘W’. ADD: New Note: If service address information isentered for any REQTYP / ACT Typecombination, then all service address rulesapply. ADD: CONDITION 1: If LUC (Listings UpdateCode) equals ‘Y’ or REQTYP equals F or



Page LL-13 of 79



M and EUC (E-911 Update Code) equals‘Y’, this field is required. CONDITION 2: If any service addressfield is populated, this field is required. ADD: Important Note - Two California Citiesexceed the 25-character limit of this field.Valid entry is MSAG abbreviation identifiedbelow: MONTEREY PENINSULA COUNTRYCLUB : MTRY PEN CC SEQUOIA NATIONAL PARK SERVICE :SEQ NPS

31. Revised

End User 8 21 / STATE DELETE: Note 2: For REQTYP ‘E’, if LUC (ListingsUpdate Code) equals ‘Y’, then ServiceAddress information is required. NOTE 3: For ACT Types ‘C’, ‘D’, ‘R’, ‘S’and ‘B’, these fields are optional for serviceaddress information and will be listed asoptional in the matrix for each serviceaddress field. However, if any of thesefields are populated, they are subject to thesame conditional rules as stated in eachfield condition for ACT Types ‘N’, ‘T’, ‘V’and ‘W’. ADD: New Note: If service address information isentered for any REQTYP / ACT Type



Page LL-14 of 79



combination, then all service address rulesapply. ADD: CONDITION 1: If LUC (Listings UpdateCode) equals ‘Y’ or REQTYP equals F orM and EUC (E-911 Update Code) equals‘Y’, this field is required. CONDITION 2: If any service addressfield is populated, this field is required.

32. Revised

End User 8 22 / ZIPCODE DELETE: Note 2: For REQTYP ‘E’, if LUC (ListingsUpdate Code) equals ‘Y’, then ServiceAddress information is required. NOTE 3: For ACT Types ‘C’, ‘D’, ‘R’, ‘S’and ‘B’, these fields are optional for serviceaddress information and will be listed asoptional in the matrix for each serviceaddress field. However, if any of thesefields are populated, they are subject to thesame conditional rules as stated in eachfield condition for ACT Types ‘N’, ‘T’, ‘V’and ‘W’. ADD: New Note: If service address information isentered for any REQTYP / ACT Typecombination, then all service address rulesapply. ADD:



Page LL-15 of 79



CONDITION 1: If LUC (Listings UpdateCode) equals ‘Y’ or REQTYP equals F orM and EUC (E-911 Update Code) equals‘Y’, this field is required. CONDITION 2: If any service addressfield is populated, this field is required.

33. New End User 8 25 / EUMI Change: REQTYP C, F and M / ACT V fromOptional to Not Applicable.

34. New End User 8 58 / REMARKS CHANGE: Reformat Remarks Section

35. Previous

Loop 9 14 / CFA CHANGE: ACT D from Optional to Not Applicable.

36. Previous

Loop 9 15 / SYSTEM ID CHANGE: ACT D from Optional to Not Applicable.

37. Previous

Loop 9 16 / CABLE ID CHANGE: ACT D from Optional to Not Applicable.

38. Previous

Loop 9 20 / CHAN/PAIR CHANGE: ACT D from Optional to Not Applicable.

39. Previous

Loop 9 29 / TER CHANGE: All ACT Types from Optional to NotApplicable.

40. New Loop W/ NP 10 11 / TSP CHANGE: * Data Characteristics: Old Data: 12 numeric characters(including 1 preprinted hyphens) New Data: 11 numeric characters



Page LL-16 of 79



Update examples to reflect that hyphens arenot part of the data characteristics

41. New NP 11 5 / NPQTY CHANGE: Add note: If NPQTY is greater than 99,then project should be populated.

42. New Resale 12 4 / ATN CHANGE: * Data Characteristics Old Data: 1 alpha character or 12alpha/numeric characters (12alpha/numeric includes two hyphens) New Data: 1 alpha character or 10 numericcharacters Update examples to reflect that hyphens arenot part of the data characteristics

43. New Resale 12 11 / LNA Change: Valid entry of ‘X’ is valid when ACT = Conly.

44. New Resale 12 21 / TSP CHANGE: * Data Characteristics: Old Data: 12 numeric characters(including 1 preprinted hyphens) New Data: 11 numeric characters Update examples to reflect that hyphens arenot part of the data characteristics

45. Previous

Resale 12 47 / BLOCK ADD: New Notes: - For valid entries of ‘A’, ‘B’ and ‘C, tochange from one option to another, BA=D



Page LL-17 of 79



must be used to delete the old blockingoption and BA=A must be used to add thenew blocking option. - For valid entries of ‘F’, ‘G’, ‘K’, ‘M’, ‘S’and ‘T’, when adding a new blockingoption or changing from one option toanother, BA=A must be specified. Alloptions (existing and new) must bespecified. This will override previousselections.

46. New Resale 12 51 / FEATUREDETAIL

DELETE: * Reference to “12.5.4 Field Requirements”

47. Previous

DSR 12.a ALL CHANGE: Section 12.a to section 14.

48. New Port 13 38 / BA ADD: NOTE 1: Valid entry of ‘A’overrides all current blocking options.When ‘A’ is selected, entries in theBLOCK field will be the only blockingoptions associated with the TN. Anyprevious blocking options will be replacedwith the blocking options selected on thisorder. NOTE 2: Valid entry of ‘A’ shouldbe used when 1) Adding new blockingoptions. 2) Changing blocking options. 3)Deleting one or more blocking options butnot removing all blocking options. In allcases, BLOCK must be populated withALL blocking options associated with theTN. NOTE 3: When BA is populatedwith ‘A’, the BLOCK field is required. NOTE 4: Valid entry of ‘D’



Page LL-18 of 79



deletes all blocking associated with theTN. ALL current blocking options willbe removed. NOTE 5: Valid entry of ‘D’ shouldbe used when ALL blocking options arebeing removed from the TN. NOTE 6: When BA is populatedwith ‘D’, the BLOCK field is prohibited

49. Revised

Port 13 39 / BLOCK CHANGE: Condition 1: Old Data: Required when BA is populated,otherwise prohibited. New Data: Required when BA is populatedwith ‘A’, otherwise prohibited.

50. Previous

Port 13 41 / FEATURECODE

ADD: CONDITION 2: For ACT TYPE’s ‘N’,‘T’ and ‘V’, SOSC code ‘PUB” must beindicated in the feature section. CONDITION 3: For ACT TYPE ‘C’,SOSC code ‘PUB’ must be indicated in thefeature section when the E-911 Data Code(EUC) equals ‘Y’.

51. Previous

Dl 13.a ALL CHANGE: Section 13.a to section 15.

52. New Port 13 10 / LNA Change: Valid entry of ‘X’ is valid when ACT = Conly.

53. New Port 13 18 / TSP Change: Change to “This field is not used at this



Page LL-19 of 79



time”.54. New Port 13 19 / SAN Change:

Change to “This field is not used at thistime”.

55. New Port 13 40 / FA Change: REQTYP M / ACT V from Required toOptional.

56. Previous

DSR 14 1 / CCNA ADD: Add REQTYP J to matrix as Required.

57. Previous

DSR 14 2 / PON ADD: Add REQTYP J to matrix as Required.

58. Previous

DSR 14 3 / VER ADD: Add REQTYP J to matrix as Conditional. Add condition for REQTYP J, requiredwhen DSUP is populated.

59. Previous

DSR 14 4 / DSR NO ADD: Add REQTYP J to matrix as Optional.

60. Previous

DSR 14 7 / ATN ADD: Add REQTYP J to matrix as Required. Add valid ACT Type / Valid Valuecombinations for REQTYP E and J.

61. Previous

DSR 14 10 / SC1 Add: Add REQTYP J to matrix as Required.

62. Previous

DSR 14 13 / PPTN Add: Add REQTYP J to matrix as Optional.

63. Previous

DSR 14 14 / D/TSENT Add: Add REQTYP J to matrix as Required.



Page LL-20 of 79



64. Previous

DSR 14 15 / EDD Add: Add REQTYP J to matrix as Optional

65. Previous

DSR 14 18 / PROJECT Add Add REQTYP J to matrix as Optional

66. Previous

DSR 14 21 / REQTYP Add Add REQTYP J to matrix as Required

67. Previous

DSR 14 22 / ACT Add Add REQTYP J to matrix as Required

68. Previous

DSR 14 23 / DSUP Add Add REQTYP J to matrix as Optional

69. Previous

DSR 14 25 / RTR Add Add REQTYP J to matrix as Optional

70. Previous

DSR 14 26 / CC Add Add REQTYP J to matrix as Required

71. Previous

DSR 14 27 / AGUTH Add Add REQTYP J to matrix as Optional

72. Previous

DSR 14 28 / DATED Add Add REQTYP J to matrix as Conditional Add Condition, Required when AGUTH ispopulated.

73. Previous

DSR 14 29 / AUTHNM Add Add REQTYP J to matrix as Conditional Add Condition, Required when AGUTH ispopulated.

74. Previous

DSR 14 30 / TOS Add



Page LL-21 of 79



Add REQTYP J to matrix as Required75. Previ

ous DSR 14 70 / EA Add

Add REQTYP A, B, C, F, J and M tomatrix. Optional for ACT = N, C, R and V Prohibited for ACT = D and T

76. Previous

DSR 14 SERVICEADDRESSSECTION (PAGEPRIOR TO FIELD74)

Add List General Requirements for ServiceAddress Section.

77. Previous

DSR 14 74 / AACT Change: REQTYP E from conditional to required.Remove condition. Add REQTYP J to matrix as required.

78. Previous

DSR 14 76 / NAME Add: Add REQTYP J to matrix as required.

79. Previous

DSR 14 78 / SANO Add: Add REQTYP J to matrix as conditional. Add condition, optional when SASN ispopulated, otherwise prohibited.

80. Previous

DSR 14 79 / SASF Add: Add REQTYP J to matrix as conditional. Add condition, optional when SANO ispopulated, otherwise prohibited.

81. Previous

DSR 14 80 / SASD Add: Add REQTYP J to matrix as conditional. Add condition, optional when SASN is



Page LL-22 of 79



populated, otherwise prohibited.82. Previ

ous DSR 14 81 / SASN Add:

Add REQTYP J to matrix as required.

83. Previous

DSR 14 82 / SATH Add: Add REQTYP J to matrix as conditional. Add condition, optional when SASN ispopulated, otherwise prohibited.

84. Previous

DSR 14 83 / SASS Add: Add REQTYP J to matrix as conditional. Add condition, optional when SASN ispopulated, otherwise prohibited.

85. Previous

DSR 14 84 / SALO Add: Add REQTYP J to matrix as conditional. Add condition, optional when SASN ispopulated, otherwise prohibited.

86. Previous

DSR 14 85 / SADLO Add: Add REQTYP J to matrix as optional.

87. Previous

DSR 14 86 / SALOC Add: Add REQTYP J to matrix as required.

88. Previous

DSR 14 87 / SAST Add: Add REQTYP J to matrix as required.

89. Previous

DSR 14 88 / SAZC Add: Add REQTYP J to matrix as required.

90. Previous

DSR 14 90 / DEL NUM Add: Add REQTYP A, B, C, F, J and M tomatrix.



Page LL-23 of 79



Optional for ACT = N, C, R, T and V Prohibited for ACT = D Change: Valid entry to 1

91. Previous

DSR 14 91 / NAME Add: Add REQTYP A, B, C, F, J and M tomatrix. Conditional for ACT = N, C, D, R, T andV. Condition: Required when the deliveryname is different than the end user name,otherwise not applicable.

92. Previous

DSR 14 93 / DDANO Add: Add REQTYP A, B, C, F, J and M tomatrix. Conditional for ACT = N, C, R, T and V. Prohibited for ACT = D Condition: Optional when DDASN ispopulated, otherwise prohibited.

93. Previous

DSR 14 94 / DDASF Add: Add REQTYP A, B, C, F, J and M tomatrix. Conditional for ACT = N, C, R, T and V. Prohibited for ACT = D Condition: Optional when DDANO ispopulated, otherwise prohibited.

94. Previ DSR 14 95 / DDASD Add:



Page LL-24 of 79



ous Add REQTYP A, B, C, F, J and M tomatrix. Conditional for ACT = N, C, R, T and V. Prohibited for ACT = D Condition: Optional when DDANO ispopulated, otherwise prohibited.

95. Previous

DSR 14 96 / DDASN Add: Add REQTYP A, B, C, F, J and M tomatrix. Conditional for ACT = N, C, R, T and V. Prohibited for ACT = D Condition: Required when the deliveryaddress differs from the service address,otherwise prohibited.

96. Previous

DSR 14 97 / DDATH Add: Add REQTYP A, B, C, F, J and M tomatrix. Conditional for ACT = N, C, R, T and V. Prohibited for ACT = D Condition: Optional when DDASN ispopulated, otherwise prohibited.

97. Previous

DSR 14 98 / DDASS Add: Add REQTYP A, B, C, F, J and M tomatrix. Conditional for ACT = N, C, R, T and V. Prohibited for ACT = D Condition: Optional when DDASN is



Page LL-25 of 79




ous DSR 14 99 / DDALO Add:

Add REQTYP A, B, C, F, J and M tomatrix. Conditional for ACT = N, C, R, T and V. Prohibited for ACT = D Condition: Optional when DDASN ispopulated, otherwise prohibited.

99. Previous

DSR 14 100 / DDADLO Add: Add REQTYP A, B, C, F, J and M tomatrix. Conditional for ACT = N, C, R, T and V. Prohibited for ACT = D Condition: Optional when DDASN ispopulated, otherwise prohibited.

100. Previous

DSR 14 101 / DDALOC Add: Add REQTYP A, B, C, F, J and M tomatrix. Conditional for ACT = N, C, R, T and V. Prohibited for ACT = D Condition: Required when the deliveryaddress differs from the service address,otherwise prohibited.

101. Previous

DSR 14 102 / DDAST Add: Add REQTYP A, B, C, F, J and M tomatrix. Conditional for ACT = N, C, R, T and V. Prohibited for ACT = D



Page LL-26 of 79



Condition: Required when the deliveryaddress differs from the service address,otherwise prohibited.

102. Previous

DSR 14 103 / DDAZC Add: Add REQTYP A, B, C, F, J and M tomatrix. Conditional for ACT = N, C, R, T and V. Prohibited for ACT = D Condition: Required when the deliveryaddress differs from the service address,otherwise prohibited.

103. Previous

DSR 14 105 / DIRANW Add: Add REQTYP A, B, C, F, J and M tomatrix. Optional for ACT = N, C, R, T and V. Prohibited for ACT = D

104. Previous

DSR 14 106 / DIRNEWW Add: Add REQTYP A, B, C, F, J and M tomatrix. Optional for ACT = N and V Prohibited for ACT = C, D, R and T Optional for REQTYP J / ACT = R Add default values to Note 1.

105. Previous

DSR 14 108 / DIRANY Add: Add REQTYP A, B, C, F, J and M tomatrix. Optional for ACT = N and V



Page LL-27 of 79



Prohibited for ACT = C, D, R and T Optional for REQTYP J / ACT = R Add default values to Note 1.

106. Previous

DSR 14 109 / DIRNEWY Add: Add REQTYP A, B, C, E, F, J and M tomatrix. Optional for ACT = N , V and W Prohibited for ACT = C, D, R and T Optional for REQTYP J / ACT = R Add default values to Note 1.

107. Previous

DSR 14 110 / DIRANB Add: Add REQTYP A, B, C, F, J and M tomatrix. Optional for ACT = N, C, T, R and V Prohibited for ACT = D Add default values to Note 1.

108. Previous

DSR 14 112 / DIRNEWB Add: Add REQTYP A, B, C, E, F, J and M tomatrix. Optional for ACT = N ,V and W Prohibited for ACT = C, D, R and T Optional REQTYP J / ACT = R Add default values to Note 1.

109. Previous

Dl 15 10 / LACT ADD: Add REQTYP’s A, B, C, F, J and M to



Page LL-28 of 79



matrix as required. Add Note 2: Change activities of I and Omay not be used if changes are made toTOA or LTN. CHANGE: Change REQTYP E to Required. DELETE: Condition 1 - Required when LUC = Y

110. Revised

Dl 15 11 / ALI ADD: Add REQTYP’s A, B, C, F, J and M tomatrix as Not Applicable. Change: Change condition to: Required when STYC= CI or SI, otherwise optional.

111. Revised

Dl 15 12 / RTY ADD: Add REQTYP’s A, B, C, F, J and M tomatrix as required. Add AM = Additional Main Listing to the2nd and 3rd positions of valid values. Add RC = Recap Header to the 2nd and 3rd

positions of valid values. Add valid combinations to Note 1: LAM,FRC and LRC. CHANGE: Change REQTYP E to Required.



Page LL-29 of 79



DELETE: Condition 1 - Required when LUC = Y

112. Previous

Dl 15 13 / LTY ADD: Add REQTYP’s A, B, C, F, J and M tomatrix: ACT = N, C, R, T, V as Required ACT = D as Optional

113. Previous

Dl 15 14 / TT ADD: Add REQTYP’s A, B, C, F, J and M tomatrix as Optional.

114. Previous

Dl 15 15 / STYC ADD: Note 3: Simple Caption Headers mustconform to a specified format. The formatmay be either: • Name only • Name and Address only Note 4: SLU Headers must conform to aspecified format. The format may be: • Name and Telephone Numberonly • Name, Address and ListedTelephone Number Add valid entries: SH = SLU Header SI = SLU Indent Add REQTYP’s A, B, C, F, J and M tomatrix. Required for ACT Types N, C, T, R and V. Optional for ACT Type D.



Page LL-30 of 79



Prohibited for ACT Types S and B. CHANGE: REQTYP E fields listed as conditional torequired. DELETE: Condition 1.

115. Revised

Dl 15 16 / TOA ADD: NOTE 1: TYPE OF ACCT must be Bwhen first position of TOS=1 or 3. NOTE 2: TYPE OF ACCT must be Rwhen first position of TOS=2. Add REQTYP’s A, B, C, F, J and M tomatrix. Required for ACT Types N, C, T, R and V. Not Applicable for ACT Type D. Prohibited for ACT Types S and B.

116. Previous

Dl 15 18 / DOI ADD: NOTE 1: Valid value should always equal"1" when STYC = CI or SI. NOTE 2: Valid value should always equal"0" when STYC = CH or SH. Add REQTYP’s A, B, C, F, J and M tomatrix. Optional for ACT Types N, C, D, T, R andV. Prohibited for ACT Types S and B.

117. Previ Dl 15 19 / LTN ADD:



Page LL-31 of 79



ous Add REQTYP’s A, B, C, F, J and M tomatrix. Required for ACT Types N, C, D, T, R andV. Prohibited for ACT Types S and B. CHANGE: REQTYP E fields listed as conditional torequired. DELETE: Condition 1.

118. Previous

Dl 15 20 / NSTN ADD: Add REQTYP’s A, B, C, E, F, J and M tomatrix. Conditional for ACT Types N, C, D, T, Rand V. Prohibited for ACT Types E, S and B. ADD: Condition 1 - Optional when the 2nd and3rd position of RTY is “XL” , otherwiseprohibited.

119. Previous

Dl 15 21 / OMTN ADD: Add REQTYP’s A, B, C, F, J and M tomatrix. REQTYP’s C, F and M: Optional for ACT Types N, C, T, R and V. Not Applicable for ACT Type D Prohibited for ACT Types S and B.



Page LL-32 of 79



REQTYP’s A and B Optional for ACT Types N, C, D, T, R andV. Prohibited for ACT Types S and B.

120. New Dl 15 22 / LEX CHANGE: * Data Characteristics: Old Data: 6 numeric characters (including1 preprinted hyphens) New Data: 6 numeric characters Update examples to reflect that hyphens arenot part of the data characteristics

121. Previous

Dl 15 22 / LEX ADD: Add REQTYP’s A, B, C, F, J and M tomatrix. REQTYP’s C, F and M: Optional for ACT Types N, C, T, R and V. Not Applicable for ACT Type D Prohibited for ACT Types S and B. REQTYP’s A and B Optional for ACT Types N, C, D, R and V. Prohibited for ACT Types S and B.

122. Previous

Dl 15 23 / LNLN ADD: Add REQTYP’s A, B, C, F, J and M tomatrix. Required for ACT Types N, C, D, T, R andV. Prohibited for ACT Types S and B.

123. Previous

Dl 15 24 / LNFN ADD:



Page LL-33 of 79



Add REQTYP’s A, B, C, F, J and M tomatrix. Optional for ACT Types N, C, D, T, R andV. Prohibited for ACT Types S and B.

124. Previous

Dl 15 27 / PLA ADD: Add REQTYP’s A, B, C, F, J and M tomatrix. Conditional for ACT Types N, C, T, R andV. Optional for ACT Type D. Prohibited for ACT Types S and B. CHANGE: REQTYP E / ACT Types N, C, T, R and Vto Conditional. ADD: Condition 1 - Required when LNLN isnumeric.

125. Previous

Dl 15 28 / DES ADD: Add REQTYP’s A, B, C, F, J and M tomatrix. Optional for ACT Types N, C, D, T, R andV. Prohibited for ACT Types S and B.

126. Previous

Dl 15 29 / TL ADD: Add REQTYP’s A, B, C, F, J and M tomatrix. Optional for ACT Types N, C, D, T, R and



Page LL-34 of 79



V. Prohibited for ACT Types S and B.

127. Previous

Dl 15 30 / TITLE1 ADD: Add REQTYP’s A, B, C, F, J and M tomatrix. Optional for ACT Types N, C, D, T, R andV. Prohibited for ACT Types S and B.

128. Previous


129. Previous

Dl 15 34 / LANO ADD: Add REQTYP’s A, B, C, F, J and M tomatrix. Conditional for ACT Types N, C, D, T, Rand V. Prohibited for ACT Types S and B. Add Condition 1 - Optional when LASN ispopulated, otherwise prohibited.

130. Previous

Dl 15 35 / LASF ADD: Add REQTYP’s A, B, C, F, J and M tomatrix. Conditional for ACT Types N, C, D, T, Rand V. Prohibited for ACT Types S and B. Add Condition 1 - Optional when LANO is



Page LL-35 of 79




ous Dl 15 36 / LASD ADD:

Add REQTYP’s A, B, C, F, J and M tomatrix. Conditional for ACT Types N, C, D, T, Rand V. Prohibited for ACT Types S and B. Add Condition 1 - Optional when LASN ispopulated, otherwise prohibited.

132. Previous

Dl 15 37 / LASN ADD: Add REQTYP’s A, B, C, F, J and M tomatrix. Optional for ACT Types N, C, D, T, R andV. Prohibited for ACT Types S and B.

133. Previous

Dl 15 38 / LATH ADD: Add REQTYP’s A, B, C, F, J and M tomatrix. Conditional for ACT Types N, C, D, T, Rand V. Prohibited for ACT Types S and B. Add Condition 1 - Optional when LASN ispopulated, otherwise prohibited.

134. Previous

Dl 15 41 / LALOC ADD: Add REQTYP’s A, B, C, F, J and M tomatrix. Optional for ACT Types N, C, D, T, R andV. Prohibited for ACT Types S and B.



Page LL-36 of 79



Allow use of hyphen, ampersand andapostrophe

135. Previous

Dl 15 42 / LAST ADD: Add REQTYP’s A, B, C, F, J and M tomatrix. Conditional for ACT Types N, C, D, T, Rand V. Prohibited for ACT Types S and B. Add Condition 1 - Optional when LALOCis populated, otherwise prohibited.

136. Previous

Dl 15 43 / LAZC ADD: Add REQTYP’s A, B, C, F, J and M tomatrix. Conditional for ACT Types N, C, D, T, Rand V. Prohibited for ACT Types S and B. Add Condition 1 - Optional when LALOCis populated, otherwise prohibited.

137. Previous

Dl 15 44 / ITEXT ADD: Add REQTYP’s A, B, C, F, J and M tomatrix. Conditional for ACT Types N, C, D, T, Rand V. Prohibited for ACT Types S and B. Add Condition 1 - Required when STYC =SI or CI and ADI is populated, otherwiseoptional.

138. Previous

Dl 15 45 / LOI ADD:



Page LL-37 of 79




139. New Dl 15 48 / LTXNUM DELETE: * Remove second entry of field number 48(number is repeated twice).

140. Revised

Dl 15 49 / YPH ADD: Add REQTYP’s A, B, C, F, J and M tomatrix. Optional for ACT Types C, D, T and R Conditional for ACT Types N and V Prohibited for ACT Types S and B. Change condition to include TOA=B.

141. Previous

Dl 15 52 / ADI ADD: Add REQTYP’s A, B, C, F, J and M tomatrix. Optional for ACT Types N, C, D, T, R andV. Prohibited for ACT Types S and B.

142. Previous

Dl 15 53 / DIRIDL ADD: Add REQTYP’s A, B, C, F, J and M tomatrix. Conditional for ACT Types N, C, D, T, Rand V. Optional for ACT Types N and V Prohibited for ACT Types S and B.

143. Previous

Dl 15 59 / STR ADD:



Page LL-38 of 79



Add REQTYP’s A, B, C, F, J and M tomatrix. Optional for ACT Types N, C, T, R and V. Prohibited for ACT Types D, S and B.

144. Revised

Dl 15 62 / OMSD ADD: Add REQTYP’s A, B, C, F, J and M tomatrix. Optional for ACT Types N, C, T, R and V. Prohibited for ACT Types D, S and B. Add Note: Separate multiple codes with acomma. Show examples with multiple codes.

145. Previous

Dl 15 65 / BRO ADD: Add REQTYP’s A, B, C, D, F, J and M tomatrix. Optional for ACT Types N, C, T, R and V. Prohibited for ACT Types D, S and B. Add valid entries: B = Place listing only in the businesssection in directory. R = Place listing only in the residencesection in directory.

146. Previous

Dl 15 66 / PROG ADD: Add REQTYP’s A, B, C, F, J and M tomatrix. Optional for ACT Types N, C, D, T, R andV.



Page LL-39 of 79



Prohibited for ACT Types S and B.147. Previ

ous Dl 15 67 / REMARKS ADD:


148. Previous

Dl 15 70 / TNTR ADD: Add REQTYP’s A, B, C, F, J and M tomatrix as conditional. Add condition 1: Prohibited when theOMTN field is “O”, otherwise optional

149. Previous

Dl 15 71 / CR ADD: Add REQTYP’s A, B, C, F, J and M tomatrix as conditional. Add condition 1: Required when the 2ndand 3rd position of RTY field is “CR”,otherwise optional.

150. New Appendix A INTERCOM CHANGE: * Change feature description fromGrandfathered to “Available for ResaleConversions only”.

151. New Appendix A OAR CHANGE: * Indicate “Resale Only”.

152. New Appendix A WML CHANGE: * Indicate “Resale Only”.

153. New Appendix B CHANGE: *

18.1 description changed to “Address Table- Thoroughfare Abbreviations”



Page LL-40 of 79

Accessible

PACIFIC BELL - “Correction to Final Requirements for the June 26th Release”

Date: April 2, 1999

Number: CLECCS99- 047

Contact: Pacific Bell Account Manager

On March 31, 1999, Pacific Bell (Pacific) issued the Final Requirements for the June 26, 1999 LSROrdering Release (Accessible Letter CLECCS99-046). In these requirements are corrections tomany examples clarifying the use of hyphens. Pacific inadvertently left out two fields that also needcorrections on the use of hyphens. These two fields are BAN1 and BAN2 of the LSR Adminsection. Pacific Bell is adding these two fields to the Final Requirements. As a reference, the twofields are items 21 and 22 in the attached change log.

The CLEC website will also be updated reflecting the inclusion of the BAN1 and BAN2 fieldchanges. The Change Log and the Detailed Requirements are on our CLEC website at:http://info.sbc.com/lwc. Once there, click on:• Customer Handbook• California• User Guide.

On the left of the screen is the table of contents and the requirements for the Release. Just click onthe one you want.

Pacific apologizes for this confusion. In an effort to be consistent, the Final Requirements versionnumber will be increased to Version 2.1 with new version date. Therefore, CLECs can use Version2.1 as a complete replacement of the Final Requirements.



Page LL-41 of 79

Please direct any questions to you Account Manager.

FINAL RELEASE NOTIFICATION for 06/26/99Version 2.0 Date of Version: 03/31/99



Page LL-42 of 79



1. Previous

All ADMINISTRATIVE; DSR FORMS:FIELD #2 END USER; LS; LSW/ NP; NP;RESALE; PORT; DLFORMS: FIELD #1 PON

Change: NOTE #1 From: The Purchase Order Number may bereused after two years from the completiondate of the original request. To: The Purchase Order Number may notbe reused.

2. New**

Admin End User

7 8

74 / Contact Tel No 84 / Imp. Tel No 87 / Alt Imp. Tel No 91 / Des Tel No. 24 / LCON Tel No 47 / BillCon Tel No


3. New**

Admin End User LOOP LOOP W/ NP NP

7 8 9 10 11

76 / Contact Fax No 92 / Design Fax No 50 / Disc # 28 / Disc # 31 / TC TO PRI 32 / TC TO SEC 12 / LRN 30 / Ported # 32 / CFTN 41 / TC TO PRI 42 / TC TO SEC 11 / LRN 14 / Ported # 16 / CFTN 25 / TC TO PRI 26 / TC TO SEC





Page LL-43 of 79



Resale PORT DL

12 13 14

14 / TN 15 / OTN 31 / TC TO PRI 32 / TC TO SEC 13 / TN 14 / OTN 23 / TC TO PRI 24 / TC TO SEC 19 / LTN

4. New**

Forms Provided 1.3 DELETE: * “Hyphens will be used for paper orderingand not for EDI.” Information concerning use of hyphens forEDI ordering can be found in Section 4.

5. Previous

Intro 2.6a / 2.6b DSR / DL Change: Change “Directory Service can only beordered electronically as part of a RESALEOrder” to “Directory Service can be orderedas part of a LSR”. Delete: Directory Services for UNE products mustbe submitted directly through the listingsgateway.

6. New**

FormDescriptions

3.0 CHANGE: * 3.1 from “Apptime - Appointment Time” to“Field, Matrixes and ConditionalDefinitions”.

7. New**

FormDescription

3.0 CHANGE: *




Page LL-44 of 79



Example from field number 13.8. New

** Table OfContents

3.1 CHANGE: * 3.1 description should read “ConditionalUsage - Examples”

9. Previous

Intro 3.2 REQUEST TYPE &ACTIVITY

Add: ( J ) Listings Only

10. New**

Act Definitions 3.4 Change: Conversion of Service to a new CLEC: from The CLEC can - Change ServiceAddress (UNE only) to The CLEC cannot - Change ServiceAddress

11. Previous

Intro 3.5 FORMREQUIREMENTSMATRIX

Change: Change DL and DSR Forms for REQTYPA, B, C, F and M / ACT N, C, D, R and Vfrom Prohibited to Optional. Change DL and DSR Forms for REQTYPM / ACT T from Prohibited to Optional. Add: REQTYP J matrix: DL and DSR areRequired for Record Activity. All otherREQTYP / ACT Type combinations areProhibited.

12. New**

Notifications 5.0 CHANGE: * Add notification forms previously includedin section 5.0 (omitted from ElectronLSOR). Notification forms will be inAppendix C.




Page LL-45 of 79



13. Previous

Intro 5.0 PACIFIC BELL /NEVADA BELLNOTIFICATIONS

Delete: First paragraph: For Loop with Port(REQTYP ‘M’), when service is Californiaand Loop Start is requested on order, referto section 5.8 for a list of notifications anderror message codes. This is an interimprocess for orders submitted via LEX andFAX.

14. New**

CompletionNotifications

5.3 CHANGE: * RT Field Name description to “ResponseType”.

15. Revised

Intro 5.4 MISSEDCOMMITMENTS /JEOPARDYNOTIFICATIONS

Delete: Resale Missed Commitments Add: The Jeopardy Notification process forUNE/RESALE will be initiated in thisrelease. If a jeopardy condition shouldoccur on an LSR received mechanically(via EDI or LEX); Pacific Bell / NevadaBell will mechanically send a notification(via EDI or LEX) to the CLEC advising ofa possible delay. This information will beutilizing the coding/fields defined inEDI9/LSOG 3. The individual fieldsreturned are listed in the attached detailedinformation. Added additional error messages.

16. Previous

Intro 5.8 LOOP W/ PORTNOTIFICATIONS(INTERIM)

Delete: Delete Section 5.8

17. New**

Intro 5.8 Listings Error Codes ADD:




Page LL-46 of 79



Listings error codes / messages as section5.8.

18. New**

Admin 7 8 / ATN CHANGE: * Data Characteristics Old Data: 1 alpha character or 12alpha/numeric characters (12alpha/numeric includes two hyphens) New Data: 1 alpha character or 10 numericcharacters Update examples to reflect that hyphens arenot part of the data characteristics

19. New**

Admin 7 11 / D/TSENT CHANGE: * Data Characteristics: Old Data: 17 alpha / numeric characters(including 3 preprinted hyphens) New Data: 14 alpha / numeric characters Update examples to reflect that hyphens arenot part of the data characteristics

20. Previous

Admin 7 43 / SECNCI Change: REQTYP A and B / ACT D fromConditional to Not Applicable.

21. New***

Admin

7

53 / BAN1 CHANGE: * Data Characteristics: Old Data: 13 alpha/numeric characters New Data: 10 numeric characters




Page LL-47 of 79



Update examples to reflect that hyphens arenot part of the data characteristics

22. New***

Admin

7

55 / BAN2 CHANGE: * Data Characteristics: Old Data: 13 alpha/numeric characters New Data: 10 numeric characters Update examples to reflect that hyphens arenot part of the data characteristics

23. Revised

Admin 7 100 / REMARKS CHANGE: Reformat REMARKS section. Show examples by REQTYP.

24. Revised

Admin 7 100 / REMARKS ADD: ECC (E-911 Customer Code assigned byCLEC) Valid entry is /ECC=XXX

25. Previous

Admin 7 100 / REMARKS ADD: NENA (National Emergency NumberingAssociation identifier for CLEC). Valid entry is /NENAID=XXXXX

26. Revised

End User 8 8 / NAME CHANGE: REQTYP ‘F’ and ‘M’ / ACT Type ‘R’ and‘D’ from optional to conditional.

27. Revised

End User 8 10 / SANO DELETE: Note 2: For REQTYP ‘E’, if LUC (ListingsUpdate Code) equals ‘Y’, then Service




Page LL-48 of 79



Address information is required. NOTE 3: For ACT Types ‘C’, ‘D’, ‘R’, ‘S’and ‘B’, these fields are optional for serviceaddress information and will be listed asoptional in the matrix for each serviceaddress field. However, if any of thesefields are populated, they are subject to thesame conditional rules as stated in eachfield condition for ACT Types ‘N’, ‘T’, ‘V’and ‘W’. ADD: New Note: If service address information isentered for any REQTYP / ACT Typecombination, then all service address rulesapply. ADD: CONDITION 3: If ACT Type equals C, Dor R, Conditions 1 and 2 apply when CITY(EU field 20) is populated, otherwise thisfield is optional for these ACT Types.

28. Revised

End User 8 11 / SASF DELETE: Note 2: For REQTYP ‘E’, if LUC (ListingsUpdate Code) equals ‘Y’, then ServiceAddress information is required.




Page LL-49 of 79



NOTE 3: For ACT Types ‘C’, ‘D’, ‘R’, ‘S’and ‘B’, these fields are optional for serviceaddress information and will be listed asoptional in the matrix for each serviceaddress field. However, if any of thesefields are populated, they are subject to thesame conditional rules as stated in eachfield condition for ACT Types ‘N’, ‘T’, ‘V’and ‘W’. ADD: New Note: If service address information isentered for any REQTYP / ACT Typecombination, then all service address rulesapply. ADD: CONDITION 2: If ACT Type equals C, Dor R, Condition 1 applies when CITY (EUfield 20) is populated, otherwise this field isoptional for these ACT Types.

29. Revised

End User 8 12 / SASD DELETE: Note 2: For REQTYP ‘E’, if LUC (ListingsUpdate Code) equals ‘Y’, then ServiceAddress information is required. NOTE 3: For ACT Types ‘C’, ‘D’, ‘R’, ‘S’and ‘B’, these fields are optional for serviceaddress information and will be listed asoptional in the matrix for each serviceaddress field. However, if any of thesefields are populated, they are subject to thesame conditional rules as stated in each




Page LL-50 of 79



field condition for ACT Types ‘N’, ‘T’, ‘V’and ‘W’. ADD: New Note: If service address information isentered for any REQTYP / ACT Typecombination, then all service address rulesapply. ADD: CONDITION 2: If ACT Type equals C, Dor R, Condition 1 applies when CITY (EUfield 20) is populated, otherwise this field isoptional for these ACT Types.

30. Revised

End User 8 13 / SASN DELETE: Note 2: For REQTYP ‘E’, if LUC (ListingsUpdate Code) equals ‘Y’, then ServiceAddress information is required. NOTE 3: For ACT Types ‘C’, ‘D’, ‘R’, ‘S’and ‘B’, these fields are optional for serviceaddress information and will be listed asoptional in the matrix for each serviceaddress field. However, if any of thesefields are populated, they are subject to thesame conditional rules as stated in eachfield condition for ACT Types ‘N’, ‘T’, ‘V’and ‘W’. ADD: New Note: If service address information isentered for any REQTYP / ACT Type




Page LL-51 of 79



combination, then all service address rulesapply. ADD: CONDITION 2: If ACT Type equals C, Dor R, Condition 1 applies when CITY (EUfield 20) is populated, otherwise this field isoptional for these ACT Types.

31. Revised

End User 8 14 / SATH DELETE: Note 2: For REQTYP ‘E’, if LUC (ListingsUpdate Code) equals ‘Y’, then ServiceAddress information is required. NOTE 3: For ACT Types ‘C’, ‘D’, ‘R’, ‘S’and ‘B’, these fields are optional for serviceaddress information and will be listed asoptional in the matrix for each serviceaddress field. However, if any of thesefields are populated, they are subject to thesame conditional rules as stated in eachfield condition for ACT Types ‘N’, ‘T’, ‘V’and ‘W’. ADD: New Note: If service address information isentered for any REQTYP / ACT Typecombination, then all service address rulesapply. ADD: CONDITION 2: If ACT Type equals C, Dor R, Condition 1 applies when CITY (EU




Page LL-52 of 79



field 20) is populated, otherwise this field isoptional for these ACT Types.

32. Revised

End User 8 20 / CITY DELETE: Note 2: For REQTYP ‘E’, if LUC (ListingsUpdate Code) equals ‘Y’, then ServiceAddress information is required. NOTE 3: For ACT Types ‘C’, ‘D’, ‘R’, ‘S’and ‘B’, these fields are optional for serviceaddress information and will be listed asoptional in the matrix for each serviceaddress field. However, if any of thesefields are populated, they are subject to thesame conditional rules as stated in eachfield condition for ACT Types ‘N’, ‘T’, ‘V’and ‘W’. ADD: New Note: If service address information isentered for any REQTYP / ACT Typecombination, then all service address rulesapply. ADD: CONDITION 1: If LUC (Listings UpdateCode) equals ‘Y’ or REQTYP equals F orM and EUC (E-911 Update Code) equals‘Y’, this field is required. CONDITION 2: If any service addressfield is populated, this field is required. ADD:




Page LL-53 of 79



Important Note - Two California Citiesexceed the 25-character limit of this field.Valid entry is MSAG abbreviation identifiedbelow: MONTEREY PENINSULA COUNTRYCLUB : MTRY PEN CC SEQUOIA NATIONAL PARK SERVICE :SEQ NPS

33. Revised

End User 8 21 / STATE DELETE: Note 2: For REQTYP ‘E’, if LUC (ListingsUpdate Code) equals ‘Y’, then ServiceAddress information is required. NOTE 3: For ACT Types ‘C’, ‘D’, ‘R’, ‘S’and ‘B’, these fields are optional for serviceaddress information and will be listed asoptional in the matrix for each serviceaddress field. However, if any of thesefields are populated, they are subject to thesame conditional rules as stated in eachfield condition for ACT Types ‘N’, ‘T’, ‘V’and ‘W’. ADD: New Note: If service address information isentered for any REQTYP / ACT Typecombination, then all service address rulesapply. ADD:




Page LL-54 of 79



CONDITION 1: If LUC (Listings UpdateCode) equals ‘Y’ or REQTYP equals F orM and EUC (E-911 Update Code) equals‘Y’, this field is required. CONDITION 2: If any service addressfield is populated, this field is required.

34. Revised

End User 8 22 / ZIPCODE DELETE: Note 2: For REQTYP ‘E’, if LUC (ListingsUpdate Code) equals ‘Y’, then ServiceAddress information is required. NOTE 3: For ACT Types ‘C’, ‘D’, ‘R’, ‘S’and ‘B’, these fields are optional for serviceaddress information and will be listed asoptional in the matrix for each serviceaddress field. However, if any of thesefields are populated, they are subject to thesame conditional rules as stated in eachfield condition for ACT Types ‘N’, ‘T’, ‘V’and ‘W’. ADD: New Note: If service address information isentered for any REQTYP / ACT Typecombination, then all service address rulesapply. ADD: CONDITION 1: If LUC (Listings UpdateCode) equals ‘Y’ or REQTYP equals F orM and EUC (E-911 Update Code) equals‘Y’, this field is required.




Page LL-55 of 79



CONDITION 2: If any service addressfield is populated, this field is required.

35. New**

End User 8 25 / EUMI Change: REQTYP C, F and M / ACT V fromOptional to Not Applicable.

36. New**

End User 8 58 / REMARKS CHANGE: Reformat Remarks Section

37. Previous

Loop 9 14 / CFA CHANGE: ACT D from Optional to Not Applicable.

38. Previous

Loop 9 15 / SYSTEM ID CHANGE: ACT D from Optional to Not Applicable.

39. Previous

Loop 9 16 / CABLE ID CHANGE: ACT D from Optional to Not Applicable.

40. Previous

Loop 9 20 / CHAN/PAIR CHANGE: ACT D from Optional to Not Applicable.

41. Previous

Loop 9 29 / TER CHANGE: All ACT Types from Optional to NotApplicable.

42. New**

Loop W/ NP 10 11 / TSP CHANGE: * Data Characteristics: Old Data: 12 numeric characters(including 1 preprinted hyphens) New Data: 11 numeric characters Update examples to reflect that hyphens arenot part of the data characteristics




Page LL-56 of 79



43. New**

NP 11 5 / NPQTY CHANGE: Add note: If NPQTY is greater than 99,then project should be populated.

44. New**

Resale 12 4 / ATN CHANGE: * Data Characteristics Old Data: 1 alpha character or 12alpha/numeric characters (12alpha/numeric includes two hyphens) New Data: 1 alpha character or 10 numericcharacters Update examples to reflect that hyphens arenot part of the data characteristics

45. New**

Resale 12 11 / LNA Change: Valid entry of ‘X’ is valid when ACT = Conly.

46. New**

Resale 12 21 / TSP CHANGE: * Data Characteristics: Old Data: 12 numeric characters(including 1 preprinted hyphens) New Data: 11 numeric characters Update examples to reflect that hyphens arenot part of the data characteristics

47. Previous

Resale 12 47 / BLOCK ADD: New Notes: - For valid entries of ‘A’, ‘B’ and ‘C, tochange from one option to another, BA=Dmust be used to delete the old blocking




Page LL-57 of 79



option and BA=A must be used to add thenew blocking option. - For valid entries of ‘F’, ‘G’, ‘K’, ‘M’, ‘S’and ‘T’, when adding a new blockingoption or changing from one option toanother, BA=A must be specified. Alloptions (existing and new) must bespecified. This will override previousselections.

48. New**

Resale 12 51 / FEATUREDETAIL

DELETE: * Reference to “12.5.4 Field Requirements”

49. Previous

DSR 12.a ALL CHANGE: Section 12.a to section 14.

50. New**

Port 13 38 / BA ADD: NOTE 1: Valid entry of ‘A’overrides all current blocking options.When ‘A’ is selected, entries in theBLOCK field will be the only blockingoptions associated with the TN. Anyprevious blocking options will be replacedwith the blocking options selected on thisorder. NOTE 2: Valid entry of ‘A’ shouldbe used when 1) Adding new blockingoptions. 2) Changing blocking options. 3)Deleting one or more blocking options butnot removing all blocking options. In allcases, BLOCK must be populated withALL blocking options associated with theTN. NOTE 3: When BA is populatedwith ‘A’, the BLOCK field is required. NOTE 4: Valid entry of ‘D’




Page LL-58 of 79



deletes all blocking associated with theTN. ALL current blocking options willbe removed. NOTE 5: Valid entry of ‘D’ shouldbe used when ALL blocking options arebeing removed from the TN. NOTE 6: When BA is populatedwith ‘D’, the BLOCK field is prohibited

51. Revised

Port 13 39 / BLOCK CHANGE: Condition 1: Old Data: Required when BA is populated,otherwise prohibited. New Data: Required when BA is populatedwith ‘A’, otherwise prohibited.

52. Previous

Port 13 41 / FEATURECODE

ADD: CONDITION 2: For ACT TYPE’s ‘N’,‘T’ and ‘V’, SOSC code ‘PUB” must beindicated in the feature section. CONDITION 3: For ACT TYPE ‘C’,SOSC code ‘PUB’ must be indicated in thefeature section when the E-911 Data Code(EUC) equals ‘Y’.

53. Previous

Dl 13.a ALL CHANGE: Section 13.a to section 15.

54. New**

Port 13 10 / LNA Change: Valid entry of ‘X’ is valid when ACT = Conly.

55. New**

Port 13 18 / TSP Change:




Page LL-59 of 79



Change to “This field is not used at thistime”.

56. New**

Port 13 19 / SAN Change: Change to “This field is not used at thistime”.

57. New**

Port 13 40 / FA Change: REQTYP M / ACT V from Required toOptional.

58. Previous

DSR 14 1 / CCNA ADD: Add REQTYP J to matrix as Required.

59. Previous

DSR 14 2 / PON ADD: Add REQTYP J to matrix as Required.

60. Previous

DSR 14 3 / VER ADD: Add REQTYP J to matrix as Conditional. Add condition for REQTYP J, requiredwhen DSUP is populated.

61. Previous

DSR 14 4 / DSR NO ADD: Add REQTYP J to matrix as Optional.

62. Previous

DSR 14 7 / ATN ADD: Add REQTYP J to matrix as Required. Add valid ACT Type / Valid Valuecombinations for REQTYP E and J.

63. Previous

DSR 14 10 / SC1 Add: Add REQTYP J to matrix as Required.

64. Previous

DSR 14 13 / PPTN Add: Add REQTYP J to matrix as Optional.

65. Previ DSR 14 14 / D/TSENT Add:




Page LL-60 of 79



ous Add REQTYP J to matrix as Required.

66. Previous

DSR 14 15 / EDD Add: Add REQTYP J to matrix as Optional

67. Previous

DSR 14 18 / PROJECT Add Add REQTYP J to matrix as Optional

68. Previous

DSR 14 21 / REQTYP Add Add REQTYP J to matrix as Required

69. Previous

DSR 14 22 / ACT Add Add REQTYP J to matrix as Required

70. Previous

DSR 14 23 / DSUP Add Add REQTYP J to matrix as Optional

71. Previous

DSR 14 25 / RTR Add Add REQTYP J to matrix as Optional

72. Previous

DSR 14 26 / CC Add Add REQTYP J to matrix as Required

73. Previous

DSR 14 27 / AGUTH Add Add REQTYP J to matrix as Optional

74. Previous

DSR 14 28 / DATED Add Add REQTYP J to matrix as Conditional Add Condition, Required when AGUTH ispopulated.

75. Previous

DSR 14 29 / AUTHNM Add Add REQTYP J to matrix as Conditional Add Condition, Required when AGUTH is




Page LL-61 of 79



populated.76. Previ

ous DSR 14 30 / TOS Add

Add REQTYP J to matrix as Required

77. Previous

DSR 14 70 / EA Add Add REQTYP A, B, C, F, J and M tomatrix. Optional for ACT = N, C, R and V Prohibited for ACT = D and T

78. Previous

DSR 14 SERVICEADDRESSSECTION (PAGEPRIOR TO FIELD74)

Add List General Requirements for ServiceAddress Section.

79. Previous

DSR 14 74 / AACT Change: REQTYP E from conditional to required.Remove condition. Add REQTYP J to matrix as required.

80. Previous

DSR 14 76 / NAME Add: Add REQTYP J to matrix as required.

81. Previous

DSR 14 78 / SANO Add: Add REQTYP J to matrix as conditional. Add condition, optional when SASN ispopulated, otherwise prohibited.

82. Previous

DSR 14 79 / SASF Add: Add REQTYP J to matrix as conditional. Add condition, optional when SANO ispopulated, otherwise prohibited.

83. Previ DSR 14 80 / SASD Add:




Page LL-62 of 79



ous Add REQTYP J to matrix as conditional. Add condition, optional when SASN ispopulated, otherwise prohibited.

84. Previous

DSR 14 81 / SASN Add: Add REQTYP J to matrix as required.

85. Previous

DSR 14 82 / SATH Add: Add REQTYP J to matrix as conditional. Add condition, optional when SASN ispopulated, otherwise prohibited.

86. Previous

DSR 14 83 / SASS Add: Add REQTYP J to matrix as conditional. Add condition, optional when SASN ispopulated, otherwise prohibited.

87. Previous

DSR 14 84 / SALO Add: Add REQTYP J to matrix as conditional. Add condition, optional when SASN ispopulated, otherwise prohibited.

88. Previous

DSR 14 85 / SADLO Add: Add REQTYP J to matrix as optional.

89. Previous

DSR 14 86 / SALOC Add: Add REQTYP J to matrix as required.

90. Previous

DSR 14 87 / SAST Add: Add REQTYP J to matrix as required.

91. Previous

DSR 14 88 / SAZC Add: Add REQTYP J to matrix as required.




Page LL-63 of 79



92. Previous

DSR 14 90 / DEL NUM Add: Add REQTYP A, B, C, F, J and M tomatrix. Optional for ACT = N, C, R, T and V Prohibited for ACT = D Change: Valid entry to 1

93. Previous

DSR 14 91 / NAME Add: Add REQTYP A, B, C, F, J and M tomatrix. Conditional for ACT = N, C, D, R, T andV. Condition: Required when the deliveryname is different than the end user name,otherwise not applicable.

94. Previous

DSR 14 93 / DDANO Add: Add REQTYP A, B, C, F, J and M tomatrix. Conditional for ACT = N, C, R, T and V. Prohibited for ACT = D Condition: Optional when DDASN ispopulated, otherwise prohibited.

95. Previous

DSR 14 94 / DDASF Add: Add REQTYP A, B, C, F, J and M tomatrix. Conditional for ACT = N, C, R, T and V.




Page LL-64 of 79



Prohibited for ACT = D Condition: Optional when DDANO ispopulated, otherwise prohibited.

96. Previous

DSR 14 95 / DDASD Add: Add REQTYP A, B, C, F, J and M tomatrix. Conditional for ACT = N, C, R, T and V. Prohibited for ACT = D Condition: Optional when DDANO ispopulated, otherwise prohibited.

97. Previous

DSR 14 96 / DDASN Add: Add REQTYP A, B, C, F, J and M tomatrix. Conditional for ACT = N, C, R, T and V. Prohibited for ACT = D Condition: Required when the deliveryaddress differs from the service address,otherwise prohibited.

98. Previous

DSR 14 97 / DDATH Add: Add REQTYP A, B, C, F, J and M tomatrix. Conditional for ACT = N, C, R, T and V. Prohibited for ACT = D Condition: Optional when DDASN ispopulated, otherwise prohibited.

99. Previous

DSR 14 98 / DDASS Add: Add REQTYP A, B, C, F, J and M to




Page LL-65 of 79



matrix. Conditional for ACT = N, C, R, T and V. Prohibited for ACT = D Condition: Optional when DDASN ispopulated, otherwise prohibited.

100. Previous

DSR 14 99 / DDALO Add: Add REQTYP A, B, C, F, J and M tomatrix. Conditional for ACT = N, C, R, T and V. Prohibited for ACT = D Condition: Optional when DDASN ispopulated, otherwise prohibited.

101. Previous

DSR 14 100 / DDADLO Add: Add REQTYP A, B, C, F, J and M tomatrix. Conditional for ACT = N, C, R, T and V. Prohibited for ACT = D Condition: Optional when DDASN ispopulated, otherwise prohibited.

102. Previous

DSR 14 101 / DDALOC Add: Add REQTYP A, B, C, F, J and M tomatrix. Conditional for ACT = N, C, R, T and V. Prohibited for ACT = D Condition: Required when the deliveryaddress differs from the service address,otherwise prohibited.




Page LL-66 of 79



103. Previous

DSR 14 102 / DDAST Add: Add REQTYP A, B, C, F, J and M tomatrix. Conditional for ACT = N, C, R, T and V. Prohibited for ACT = D Condition: Required when the deliveryaddress differs from the service address,otherwise prohibited.

104. Previous

DSR 14 103 / DDAZC Add: Add REQTYP A, B, C, F, J and M tomatrix. Conditional for ACT = N, C, R, T and V. Prohibited for ACT = D Condition: Required when the deliveryaddress differs from the service address,otherwise prohibited.

105. Previous

DSR 14 105 / DIRANW Add: Add REQTYP A, B, C, F, J and M tomatrix. Optional for ACT = N, C, R, T and V. Prohibited for ACT = D

106. Previous

DSR 14 106 / DIRNEWW Add: Add REQTYP A, B, C, F, J and M tomatrix. Optional for ACT = N and V Prohibited for ACT = C, D, R and T Optional for REQTYP J / ACT = R




Page LL-67 of 79



Add default values to Note 1.

107. Previous

DSR 14 108 / DIRANY Add: Add REQTYP A, B, C, F, J and M tomatrix. Optional for ACT = N and V Prohibited for ACT = C, D, R and T Optional for REQTYP J / ACT = R Add default values to Note 1.

108. Previous

DSR 14 109 / DIRNEWY Add: Add REQTYP A, B, C, E, F, J and M tomatrix. Optional for ACT = N , V and W Prohibited for ACT = C, D, R and T Optional for REQTYP J / ACT = R Add default values to Note 1.

109. Previous

DSR 14 110 / DIRANB Add: Add REQTYP A, B, C, F, J and M tomatrix. Optional for ACT = N, C, T, R and V Prohibited for ACT = D Add default values to Note 1.

110. Previous

DSR 14 112 / DIRNEWB Add: Add REQTYP A, B, C, E, F, J and M tomatrix.




Page LL-68 of 79



Optional for ACT = N ,V and W Prohibited for ACT = C, D, R and T Optional REQTYP J / ACT = R Add default values to Note 1.

111. Previous

Dl 15 10 / LACT ADD: Add REQTYP’s A, B, C, F, J and M tomatrix as required. Add Note 2: Change activities of I and Omay not be used if changes are made toTOA or LTN. CHANGE: Change REQTYP E to Required. DELETE: Condition 1 - Required when LUC = Y

112. Revised

Dl 15 11 / ALI ADD: Add REQTYP’s A, B, C, F, J and M tomatrix as Not Applicable. Change: Change condition to: Required when STYC= CI or SI, otherwise optional.

113. Revised

Dl 15 12 / RTY ADD: Add REQTYP’s A, B, C, F, J and M tomatrix as required. Add AM = Additional Main Listing to the2nd and 3rd positions of valid values.




Page LL-69 of 79



Add RC = Recap Header to the 2nd and 3rd

positions of valid values. Add valid combinations to Note 1: LAM,FRC and LRC. CHANGE: Change REQTYP E to Required. DELETE: Condition 1 - Required when LUC = Y

114. Previous

Dl 15 13 / LTY ADD: Add REQTYP’s A, B, C, F, J and M tomatrix: ACT = N, C, R, T, V as Required ACT = D as Optional

115. Previous

Dl 15 14 / TT ADD: Add REQTYP’s A, B, C, F, J and M tomatrix as Optional.

116. Previous

Dl 15 15 / STYC ADD: Note 3: Simple Caption Headers mustconform to a specified format. The formatmay be either: • Name only • Name and Address only Note 4: SLU Headers must conform to aspecified format. The format may be: • Name and Telephone Numberonly • Name, Address and ListedTelephone




Page LL-70 of 79



Number Add valid entries: SH = SLU Header SI = SLU Indent Add REQTYP’s A, B, C, F, J and M tomatrix. Required for ACT Types N, C, T, R and V. Optional for ACT Type D. Prohibited for ACT Types S and B. CHANGE: REQTYP E fields listed as conditional torequired. DELETE: Condition 1.

117. Revised

Dl 15 16 / TOA ADD: NOTE 1: TYPE OF ACCT must be Bwhen first position of TOS=1 or 3. NOTE 2: TYPE OF ACCT must be Rwhen first position of TOS=2. Add REQTYP’s A, B, C, F, J and M tomatrix. Required for ACT Types N, C, T, R and V. Not Applicable for ACT Type D. Prohibited for ACT Types S and B.

118. Previous

Dl 15 18 / DOI ADD: NOTE 1: Valid value should always equal




Page LL-71 of 79



"1" when STYC = CI or SI. NOTE 2: Valid value should always equal"0" when STYC = CH or SH. Add REQTYP’s A, B, C, F, J and M tomatrix. Optional for ACT Types N, C, D, T, R andV. Prohibited for ACT Types S and B.

119. Previous

Dl 15 19 / LTN ADD: Add REQTYP’s A, B, C, F, J and M tomatrix. Required for ACT Types N, C, D, T, R andV. Prohibited for ACT Types S and B. CHANGE: REQTYP E fields listed as conditional torequired. DELETE: Condition 1.

120. Previous

Dl 15 20 / NSTN ADD: Add REQTYP’s A, B, C, E, F, J and M tomatrix. Conditional for ACT Types N, C, D, T, Rand V. Prohibited for ACT Types E, S and B. ADD:




Page LL-72 of 79



Condition 1 - Optional when the 2nd and3rd position of RTY is “XL” , otherwiseprohibited.

121. Previous

Dl 15 21 / OMTN ADD: Add REQTYP’s A, B, C, F, J and M tomatrix. REQTYP’s C, F and M: Optional for ACT Types N, C, T, R and V. Not Applicable for ACT Type D Prohibited for ACT Types S and B. REQTYP’s A and B Optional for ACT Types N, C, D, T, R andV. Prohibited for ACT Types S and B.

122. New**

Dl 15 22 / LEX CHANGE: * Data Characteristics: Old Data: 6 numeric characters (including1 preprinted hyphens) New Data: 6 numeric characters Update examples to reflect that hyphens arenot part of the data characteristics

123. Previous

Dl 15 22 / LEX ADD: Add REQTYP’s A, B, C, F, J and M tomatrix. REQTYP’s C, F and M: Optional for ACT Types N, C, T, R and V. Not Applicable for ACT Type D Prohibited for ACT Types S and B.




Page LL-73 of 79



REQTYP’s A and B Optional for ACT Types N, C, D, R and V. Prohibited for ACT Types S and B.

124. Previous

Dl 15 23 / LNLN ADD: Add REQTYP’s A, B, C, F, J and M tomatrix. Required for ACT Types N, C, D, T, R andV. Prohibited for ACT Types S and B.

125. Previous

Dl 15 24 / LNFN ADD: Add REQTYP’s A, B, C, F, J and M tomatrix. Optional for ACT Types N, C, D, T, R andV. Prohibited for ACT Types S and B.

126. Previous

Dl 15 27 / PLA ADD: Add REQTYP’s A, B, C, F, J and M tomatrix. Conditional for ACT Types N, C, T, R andV. Optional for ACT Type D. Prohibited for ACT Types S and B. CHANGE: REQTYP E / ACT Types N, C, T, R and Vto Conditional. ADD: Condition 1 - Required when LNLN is




Page LL-74 of 79



numeric.127. Previ

ous Dl 15 28 / DES ADD:


128. Previous

Dl 15 29 / TL ADD: Add REQTYP’s A, B, C, F, J and M tomatrix. Optional for ACT Types N, C, D, T, R andV. Prohibited for ACT Types S and B.

129. Previous


130. Previous


131. Previous

Dl 15 34 / LANO ADD: Add REQTYP’s A, B, C, F, J and M tomatrix.




Page LL-75 of 79



Conditional for ACT Types N, C, D, T, Rand V. Prohibited for ACT Types S and B. Add Condition 1 - Optional when LASN ispopulated, otherwise prohibited.

132. Previous

Dl 15 35 / LASF ADD: Add REQTYP’s A, B, C, F, J and M tomatrix. Conditional for ACT Types N, C, D, T, Rand V. Prohibited for ACT Types S and B. Add Condition 1 - Optional when LANO ispopulated, otherwise prohibited.

133. Previous

Dl 15 36 / LASD ADD: Add REQTYP’s A, B, C, F, J and M tomatrix. Conditional for ACT Types N, C, D, T, Rand V. Prohibited for ACT Types S and B. Add Condition 1 - Optional when LASN ispopulated, otherwise prohibited.

134. Previous

Dl 15 37 / LASN ADD: Add REQTYP’s A, B, C, F, J and M tomatrix. Optional for ACT Types N, C, D, T, R andV. Prohibited for ACT Types S and B.

135. Previous

Dl 15 38 / LATH ADD:




Page LL-76 of 79



Add REQTYP’s A, B, C, F, J and M tomatrix. Conditional for ACT Types N, C, D, T, Rand V. Prohibited for ACT Types S and B. Add Condition 1 - Optional when LASN ispopulated, otherwise prohibited.

136. Previous

Dl 15 41 / LALOC ADD: Add REQTYP’s A, B, C, F, J and M tomatrix. Optional for ACT Types N, C, D, T, R andV. Prohibited for ACT Types S and B. Allow use of hyphen, ampersand andapostrophe

137. Previous

Dl 15 42 / LAST ADD: Add REQTYP’s A, B, C, F, J and M tomatrix. Conditional for ACT Types N, C, D, T, Rand V. Prohibited for ACT Types S and B. Add Condition 1 - Optional when LALOCis populated, otherwise prohibited.

138. Previous

Dl 15 43 / LAZC ADD: Add REQTYP’s A, B, C, F, J and M tomatrix. Conditional for ACT Types N, C, D, T, Rand V.




Page LL-77 of 79



Prohibited for ACT Types S and B. Add Condition 1 - Optional when LALOCis populated, otherwise prohibited.

139. Previous

Dl 15 44 / ITEXT ADD: Add REQTYP’s A, B, C, F, J and M tomatrix. Conditional for ACT Types N, C, D, T, Rand V. Prohibited for ACT Types S and B. Add Condition 1 - Required when STYC =SI or CI and ADI is populated, otherwiseoptional.

140. Previous

Dl 15 45 / LOI ADD: Add REQTYP’s A, B, C, F, J and M tomatrix. Optional for ACT Types N, C, D, T, R andV. Prohibited for ACT Types S and B.

141. New**

Dl 15 48 / LTXNUM DELETE: * Remove second entry of field number 48(number is repeated twice).

142. Revised

Dl 15 49 / YPH ADD: Add REQTYP’s A, B, C, F, J and M tomatrix. Optional for ACT Types C, D, T and R Conditional for ACT Types N and V Prohibited for ACT Types S and B. Change condition to include TOA=B.




Page LL-78 of 79



143. Previous

Dl 15 52 / ADI ADD: Add REQTYP’s A, B, C, F, J and M tomatrix. Optional for ACT Types N, C, D, T, R andV. Prohibited for ACT Types S and B.

144. Previous

Dl 15 53 / DIRIDL ADD: Add REQTYP’s A, B, C, F, J and M tomatrix. Conditional for ACT Types N, C, D, T, Rand V. Optional for ACT Types N and V Prohibited for ACT Types S and B.

145. Previous

Dl 15 59 / STR ADD: Add REQTYP’s A, B, C, F, J and M tomatrix. Optional for ACT Types N, C, T, R and V. Prohibited for ACT Types D, S and B.

146. Revised

Dl 15 62 / OMSD ADD: Add REQTYP’s A, B, C, F, J and M tomatrix. Optional for ACT Types N, C, T, R and V. Prohibited for ACT Types D, S and B. Add Note: Separate multiple codes with acomma. Show examples with multiple codes.

147. Previous

Dl 15 65 / BRO ADD:




Page LL-79 of 79



Add REQTYP’s A, B, C, D, F, J and M tomatrix. Optional for ACT Types N, C, T, R and V. Prohibited for ACT Types D, S and B. Add valid entries: B = Place listing only in the businesssection in directory. R = Place listing only in the residencesection in directory.

148. Previous

Dl 15 66 / PROG ADD: Add REQTYP’s A, B, C, F, J and M tomatrix. Optional for ACT Types N, C, D, T, R andV. Prohibited for ACT Types S and B.

149. Previous

Dl 15 67 / REMARKS ADD: Add REQTYP’s A, B, C, F, J and M tomatrix. Optional for ACT Types N, C, D, T, R andV. Prohibited for ACT Types S and B.

150. Previous

Dl 15 70 / TNTR ADD: Add REQTYP’s A, B, C, F, J and M tomatrix as conditional. Add condition 1: Prohibited when theOMTN field is “O”, otherwise optional

151. Previous

Dl 15 71 / CR ADD:




Page LL-80 of 79



Add REQTYP’s A, B, C, F, J and M tomatrix as conditional. Add condition 1: Required when the 2ndand 3rd position of RTY field is “CR”,otherwise optional.

152. New**

Appendix A INTERCOM CHANGE: * Change feature description fromGrandfathered to “Available for ResaleConversions only”.

153. New**

Appendix A OAR CHANGE: * Indicate “Resale Only”.

154. New**

Appendix A WML CHANGE: * Indicate “Resale Only”.

155. New**

Appendix B CHANGE: *

18.1 description changed to “Address Table- Thoroughfare Abbreviations”

Viveros Attachment LL · C.V. Final Requirements for June 26, 1999 Release And Correction to Final...

Documents

Transcript of Viveros Attachment LL · C.V. Final Requirements for June 26, 1999 Release And Correction to Final...