Visualiner 3D3 Arago

Power Requirements: EEWA533A 115V/1PH, 50/60Hz/8Amp 220V/1PH, 50/60Hz/8Amp Vehicle Dimensions:

Track Width: 48"-96"Wheel Base: 79"-200"Tire Diameter:Outside Unlimited

Wheel ClampsWheel Sizes: 10"- 21"Universal Rim Claws

Standard StandardEquipment Features Operator Helps And Software FeaturesDisplay Monitor Alignment Software Customer Print outs Vehicle Adjust 3-D Animations19" UVGA Color Pro32 v3.4 Adjust Camber Only Live Video Helps

Windows XP Elevated Adjustments Multiple A-Arm AdjustBase Cabinet Active Cradle Adjustments Single Tie Rod AdjustPremium Mobile Cabinet Alignment Types Drag Link Adjust Caster Swing

Total 4-Wheel 4-Wheel Steer Adjust Caster/SAI Swing on ttCPU Configuration 4-Wheel compensated Rear Shim Programs SAI Swing Elevated2.2 GHZ + 128MB Front Wheels Only Driver Complaint Diagnostics Toe Out on TurnsCD/DVD Drive (Internal) A/I Alignment Diagnostics Max Turns31/2" Floppy Drive Adjustment Help Files Windows Utilities40GB Hard Drive Alignment Display Demo/Teach Mode Imaging Data DiagnosticsNetwork Capable Front Readings User Login PDF Operators ManualMultimedia Rear Readings Preventative Maintenance Romess integration

All Readings E-Z Track Customer Data Base Inspection Results Printouts Zoom Readings Align Specs -30 yrs. Shp Info Sys Connectivity (Mitchell Cap

Ind. Camber Only EZ Toe* OEM Vehicle WizzardsPrinter Ind. Toe Only Elevated Positioning Shp Mgt Connectivity (I-Shop CompliantColor InkJet Ind. Caster Only Intuitive Caster Swing Meas. Frame Angle

Suspension Plus(Quadra-Link) Ford Bushing program Remote Controller Mercedes Spec Meas.prog. Equalized Toe Warning Infrared Pro32 Compatable Wheel Dimension Program** Adj. Front before Rear Warning

Roll Radius Meas.Prog.** Backup, Restore Setup/Calib.Additional Setups Cross Diagonal Meas.Prog.** Enhanced CCD Sensor Diag.Programmable Align Routine Ride Height Charting Live Vehicle DimensioningMultiple Languages Split Roll Positioning 2-Wheel Alignment capable

Forward Roll Positioning Auto Self Calibrating CamerasPro Akerman & Symmetry Auto Camera Targeting

Measuring Heads Measures EZ-Access (wheels-off Adj.) Automated Ride Height MeasuringAxial Plane 3 Camera SAI Graphical Caster Trail, Scrub Radius, Measuring System* Thrust Angle Optional Equipment

Included Angle Digital Remote DisplayStandard Accessories Front & Rear Set Back Front Rollback KitSteering Wheel Holder Toe Out On Turns Standard TurnplatesBrake Pedal Depressor Front Caster (-28o to +28o ) Stainless TurnplatesRemote Controller F&R Camber (-15° to +15o ) Rear Slip PlatesOptical Mouse Front & Rear Toe Universal Wheel Clamps 10"-21"

Optional kit (Up to 25" wheels)Electronic Frame Angle Meas.Voice Align OptionClearanced Rim Claws

* Patented TIP Ride Ht. Tool/Software***Patent pending EZ Access Hub AdaptersThe Products…The People…The Pride… Wheel Service Equipment Since 1925

Specifications are subject to change without notice.Copyright 2001 Snap-on Technologies

rev 12/2/03

ARAGOTM TECHNOLOGY V3D3

TM

For Reference OnlyFor Current Information See Johnbean.com

CONTINUOUS AUTOMATIC SYNCHRONIZATION

AUTOMATIC HEIGHT INDEXING

AragoTM Technology utilizes threesynchronized digital cameras. While twocameras remain aimed and focused onthe targets attached to each vehiclewheel, a third camera in the left camerapod is aimed and focused at a target onthe right hand camera pod. Thesecameras have been precisely calibrated inthe factory to allow them to continuallytrack each other as well as each of thetargets on the vehicle’s wheels even whenthe lift is going up or down.

Today, when it is so critically important to optimize favorable working conditions in order to attract and keep experienced, qualifiedtechnicians, it is just as important to make the wheel aligning process as easy, fast and as convenient as possible, while maintaininghighest levels of productivity and accuracy. Most fixed height V3D installations have a fixed window of camera range in which all themeasurement and adjustments must be performed. Adjustments cannot be done both on the floor level and at the full lift height levelwith a fixed height installation.

AragoTM Technology with automatic height indexing, however, allows a technician to do over-the-fender adjustments at floor level andthen do under-the-car adjustments at 6' lift height in no more time than it takes to raise the lift. The Arago technology maintainscontinuous and accurate readings at each alignment working height.

If finding and keeping good alignment technicians has been a problem, the new John Bean® AragoTM Technology has your answer!

John Bean’s® exclusive automatic height indexing automatically raises and lowers each camera pod as the operator raises or lowers thelift. There is no longer a need to raise or lower the lift and then raise or lower a camera boom in order to get the cameras in range tosee the targets on the vehicles. This saves valuable time and helps avoid possible operator error if the cameras are not brought into thecorrect range. These unique John Bean technologies allow automatic continuous synchronization of the measurement readings whetheralignment adjustments are being done at floor level or at the full lifting level of the lift, usually at 6 feet or more.

For Reference OnlyFor Current Information See Johnbean.com

MORE FEATURES AND BENEFITS

Visual, Non-gravity based measurements

Greater Productivity • Easier Training • Proven V3D Technology

Continuous Automatic Synchronization

Most advanced alignment software in the industry

AutomaticHeight Indexing

No Calibrations

Attractive colorprintouts

Less Maintenance

For Reference OnlyFor Current Information See Johnbean.com

FEATURES

SPECIFICATIONS

STANDARD ACCESSORIESSteering wheel holderBrake pedal depressorComputer mouseRemote controllerMouse pad

OPTIONAL EQUIPMENTVoiceAlignTM moduleDigital remote displayUniversal Alloy wheel clampsStandard turntablesStainless steel turntables

Computer Systems• 19" Color High Resolution Monitor• Mobile Deluxe Cabinet with built-in

printer drawer• 3 Self-Synchronizing Digital Camera

System• Automatic Height Indexing System• High Speed CPU*• Big Capacity RAM & HD*• High Speed DVD / CD drive• Network / Multimedia / Modem

Configuration• Extra Durable Passive Wheel Targets

• Deluxe Color Printer• Wheel Clamps (up to 20" wheels)• Optional Alloy Wheel Clamps (up to 25"

wheels)• 30 year Spec Data Base• 115 V, 1 Ph, 50/60 HZ, 8A*Contact manufacturer for current

specificationsWheel sizes 10-20"Wheel bases 48-200"Track widths 48-96"

VISUALINER 3D ARAGOTM

309 Exchange Avenue • Conway, Arkansas 72032 U.S.A. • Fax: 501-450-1585

1-800-362-4618www.johnbean.com

JOHN BEAN® CANADA • 1-800-362-4608

CONTACT OUR INTERNATIONAL DEPARTMENT AT 501-450-1568, 501-450-1526 OR 501-505-2631

© 2002 Snap-On Technologies, Inc.John Bean® is a trademark of Snap-On Technologies, Inc.All Rights Reserved 6/2002 Form #????

3RD Generation Wheel AlignersN.A.P. CCD Optical Aligners and the V3D 1&2 Aligners offer optimum performance in their respective categories. The new John Bean® V3D3 ARAGOTM alignment systemtakes wheel alignment equipment to the next generation. The V3D3 ARAGO advances "Error-Free" alignment technology with the use of 3 Self-Synchronizing Digital cam-eras and Automatic Height Indexing. This technology provides the ultimate performance in fast, easy and accurate alignments while minimizing the possibilities of errorsdue to operator and vehicle variables.

TM

For Reference OnlyFor Current Information See Johnbean.com