Vision Car Wash Wall and Equipment Cleaner
2
Vision Car Wash Wall and Equipment Cleaner Finally, a Safe and Effective wall cleaner. x Safe for employees. Vision Wall Cleaner contains no harsh or corrosive acids. Your employees don’t need to wear a hazmat suit to clean car wash x Safe on Equipment and Walls. Vision is safe on bricks, ceramic, tile, PVC panels, painted blocks, FRP, window glass, light fixtures, wash equipment and more. x Effective. Vision removes dirt, scum, hard water scale, mold and mildew from walls ceilings, floors, glass and equipment frames. Vision helps to prevent the regrowth of mold, mildew, and algae. x Fresh Smelling. Vision deodorizes your wash and leaves it smelling clean and fresh. Reclaim systems will smell noticeably better after your car wash has been cleaned by Vision Wall Cleaner. Vision Wall Cleaner is available in 5, 15, 30, and 55 gallon containers, as well as with Ver-tech Lab’s Connect & Clean Dispensing System. CAR WASH WALL CLEANING PROCEDURE 1. For initial wall cleaning or cleaning of heavily soiled walls, use Vision straight. 2. Using a Hudson Sprayer or a , apply Vision to one section of the wall or equipment, working in 3-4 foot sections. Apply Vision from bottom to top. 3. Let Vision soak on the wall or equipment for 60-90 seconds. 4. Working from top to bottom, use a high pressure sprayer to remove the film from the walls and equipment. Please note that heavily soiled areas may require scrubbing with a deck brush. Alternative Method: If you do not have a high pressure sprayer, agitate Vision on the wall surface using a deck brush or mop. Light agitation will remove most road film from the walls. Heavily soiled areas may require additional scrubbing. Rinse the walls with clean water working from top to bottom. Daily Wall Cleaner: If using Vision as part of a daily maintenance program, dilute 1:5-10 in water and follow above instructions.
-
Upload
ver-tech-labs -
Category
Automotive
-
view
29 -
download
2
Transcript of Vision Car Wash Wall and Equipment Cleaner
Vision Car Wash Wall and Equipment Cleaner Finally, a Safe and Effective wall cleaner.
x Safe for employees. Vision Wall Cleaner contains no harsh or corrosive acids. Your employees don’t need to wear a hazmat suit to clean car wash
x Safe on Equipment and Walls. Vision is safe on bricks, ceramic, tile, PVC panels,
painted blocks, FRP, window glass, light fixtures, wash equipment and more.
x Effective. Vision removes dirt, scum, hard water scale, mold and mildew from walls ceilings, floors, glass and equipment frames. Vision helps to prevent the regrowth of mold, mildew, and algae.
x Fresh Smelling. Vision deodorizes your wash and leaves it smelling clean and fresh.
Reclaim systems will smell noticeably better after your car wash has been cleaned by Vision Wall Cleaner.
Vision Wall Cleaner is available in 5, 15, 30, and 55 gallon containers, as well as with Ver-tech Lab’s Connect & Clean Dispensing System.
CAR WASH WALL CLEANING PROCEDURE
1. For initial wall cleaning or cleaning of heavily soiled walls, use Vision straight. 2. Using a Hudson Sprayer or a , apply Vision to one section of the wall or equipment, working in 3-4 foot
sections. Apply Vision from bottom to top. 3. Let Vision soak on the wall or equipment for 60-90 seconds. 4. Working from top to bottom, use a high pressure sprayer to remove the film from the walls and equipment.
Please note that heavily soiled areas may require scrubbing with a deck brush. Alternative Method: If you do not have a high pressure sprayer, agitate Vision on the wall surface using a deck brush or mop. Light agitation will remove most road film from the walls. Heavily soiled areas may require additional scrubbing. Rinse the walls with clean water working from top to bottom. Daily Wall Cleaner: If using Vision as part of a daily maintenance program, dilute 1:5-10 in water and follow above instructions.
Ver-tech Labs Connect & Clean is great way for multi-site operators to use Vision Wall and Equipment Cleaner. The Connect and Clean System features:
x Accurate dispensing. Connect & Clean accurately dilutes the product for most effective results.
x Safe for employees. The inserts inside the container minimize employee chemical exposure and spills.
x Built-in foam applicator. The foam applicator allows for consistent coverage and is a much faster way of dispensing Vision.
The Connect and Clean System includes an insert, spray foam adaptor and foaming nozzle for easy application.
A container insert that fits inside the bottle neck and contains the chemical concentrate. The insert prevents leaks and spills and protects handlers from exposure.
A spray foam adaptor that quickly and easily screws on to the detergent container. Inside the spray foam adaptor is a valve that accurately dilutes the chemicals with water.
A foaming nozzle attaches the hose on the spray foam adaptor.
1. Attach the Foaming Nozzle to a hose.
2. Squeeze the plastic handle and foam on the surface to
be cleaned. Apply the foam from the bottom to the top.
www.ver-techlabs.com Phone: 1-877-866-9742
