Virtual International Conference on Recent Advances in ...
Transcript of Virtual International Conference on Recent Advances in ...
Organised by
DEPARTMENT OF MECHANICAL ENGINEERINGCollege of Engineering & Technology
SRM INSTITUTE OF SCIENCE AND TECHNOLOGYKattankulathur Campus, Chengalpattu (DT),
Chennai-603203, Tamil Nadu, India.Phone: 044-27452270, 27453380
Website: www.srmist.edu.in
Virtual International Conference on Recent Advances inManufacturing Engineering Research (ICRAMER 2021)
15-16 April, 2021
ABOUT SRM IST
SRM Institute of Science and Technology (formerly known as 'SRM University') is located in an extensive sylvan campus of 380 acres skirting the National Highways (NH145), in the outskirts of Chennai. SRMIST is one of the top ranking Universities and most premier engineering destinations in India, which was established in 1985 by the Founder Chancellor, Dr. T.R. Paarivendhar. Now it is functioning in campuses located at Kattankulathur, Ramapuram Part (Vadapalani) and Ramapuram in Chennai and one in Modi Nagar, Ghaziabad with over 52000 students and 3200 faculty members, offering wide range of undergraduate, postgraduate and doctoral programs in Engineering, Management, Medicine & Health Sciences, Agriculture, Law and Science & Humanities. The Institution has moved up through international alliances and collaborative initiatives to achieve global excellence. SRMIST also collaborates with various foreign Universities. Now the Institute enjoys an unsurpassed reputation in academic and corporate circles being the preferred manpower source for vision to be recognized as a world - class learning institution. SRMIST has been accorded Category I status by MHRD-UGC of Government of India and also accredited by NAAC with 'A++' Grade in the year 2018.
ABOUT DEPARTMENT OF MECHANICAL ENGINEERING, SRM IST
The Department of Mechanical Engineering is one of the pioneering departments of SRMIST. The department is functionally divided into three broad areas of specialization: (i) Design (ii) Manufacturing and (iii) Thermal. B.Tech Mechanical Engineering program at Kattankulathur campus is accredited by Engineering Accreditation Commission (EAC) of ABET, USA, (www.abet.org). The department also offers M.Tech. and Doctoral programs in various specializations. The present faculty strength is 124. About 800 + research papers and 850 + conference papers have been published in national and international levels. More than 30 patents have been filed in national and international levels. The following salient workshops and conferences was conducted by the Department of Mechanical Engineering, KTR: International Conference on Advances in Mechanical Engineering in the year 2006, Short Course on Mechanics of Composite Materials and Structures: workshop on Development, Manufacturing and Analysis of Advanced Composites and short course on FEM in the year 2015, National Conference on Advances in Mechanical Engineering (NCAME 2016), Brain Wave Robotics, in the year 2017, Second International Conference on Advances in Mechanical Engineering (ICAME 2018) and Third international Conference on Advances in Mechanical Engineering ICAME 2020.
ABOUT THE CONFERENCE
Manufacturing industry is the backbone of any modern economy and manufacturing engineering is associated with providing the processes and systems to meet the demands of this sector. With the globalization of the world economy is emerging as one of the key manufacturing hubs and there is considerable demand from industry for manufacturing engineers capable of meeting the challenging requirements. The role of manufacturing in the country’s economy and societal development has long been established through their wealth creation activities. To broaden our knowledge in manufacturing and to increase innovation and responsiveness to ever increasing international needs, more in depth studies are critically needed at this juncture of global competitive scenario.
CALL FOR PAPERS
The aim of ICRAMER 2021 is to bring together specialists and practitioners from industry. R&D institutes and academicians and to provide the forum for exchange of ideas. It also provides a premier interdisciplinary platform for researchers, practitioners, and educators to present and discuss the most recent innovations, trends, and concerns as well as practical challenges encountered and solutions adopted in the fields of recent advances in manufacturing engineering research and applications.
TOPICS
Advance Optimization and charterization techniques Advances in Additive Manufacturing Advances in Machine Tool Design Advances in Materials Technology Advances in Metal Cutting TechnologyAdvances in Metal JoiningAdvances in Metal FormingArtificial Intelligence and RoboticsAutomation and Smart Systems Bio MaterialsCAD/CAM/CAE/Reverse EngineeringCellular manufacturingCharacterization and TestingCoatings and Surface EngineeringComposite and Polymer Processing Composite materialsComputer aided inspectionCryogenic aspects of metal cuttingEnergy Beam Processing Green and Sustainable Manufacturing Hybrid Manufacturing Processes and Technology Industry 4.0Laser based manufacturingMachine visionManufacturing process planning and schedulingMaterials behaviorMechanical dynamics and vibrationMechanical strengthMEMS/NEMSMetrology and Quality Micro and Nano Manufacturing
REGISTRATION
Category National International
Student Authors & Full Time Research Scholars Faculty INR 500 USD 10 Industry INR 1000 USD 20
* E - Certificate for all authorsBANK DETAILS
Account Name : Mechanical Engineering AssociationAccount No. : 459777734Name of the Bank : Indian BankIFSC Code : IDIB000S181MICR No. : 600019171
FOR REGISTRATION
Submit Abstract: : [email protected] : https://www.srmist.edu.in/icramer-2021/
REGISTRATION LINK:
https://forms.gle/pLh53s3LMPhWaJ8i7
CHIEF PATRONS
Dr. T. R. Paarivendhar, Chancellor SRMISTShri. Ravi Pachamoothoo, Pro - Chancellor (Administration), SRMISTDr. P. Sathyanarayanan, Pro - Chancellor (Academics), SRMISTDr. R. Shivakumar, Vice President, SRMISTDr. Sandeep Sancheti, Vice Chancellor, SRMIST
CHAIRPERSON OF ORGANIZING COMMITTEE
Dr. C. Muthamizhchelvan, Pro-Vice Chancellor (Engineering & Technology), SRM IST
CO-CHAIRPERSONS OF ORGANIZING COMMITTEE
Dr. T. V. Gopal, Dean, College of Engineering and Technology, SRM ISTDr. D Kingsly Jeba Singh, Chairperson, School of Mechanical Engineering, SRM IST
CONVENER
Dr. M. Cheralathan, Professor and Head, Department of Mechanical Engineering
CO-CONVENER
Dr. U. Mohammed IqbalAssociate Professor and Manufacturing Division HeadDepartment of Mechanical Engineering
ORGANIZING SECRETARIES
Dr. M. R. Stalin John, Associate ProfessorDr. A. Razal Rose, Associate ProfessorDr. I. Infanta Mary Priya, Assistant ProfessorDr. N. Harshavardhana, Assistant ProfessorMr. J. Santhakumar, Assistant Professor
Department of Mechanical EngineeringSRM Institute of Science & TechnologyKattankulathur -603203. Chengalpattu (DT), Tamil Nadu, India.https://www.srmist.edu.in/icramer-2021/
TECHNICAL COMMITTEE MEMBERS
Dr. Shubhabrata Datta, Research ProfessorDr. S. Prabhu, ProfessorDr. T. Rajasekaran, ProfessorDr. A. Razal Rose, Associate ProfessorDr. U. Mohammed Iqbal, Associate ProfessorDr. M. R. Stalin John, Associate ProfessorDr. M. Prakash, Associate ProfessorDr. S. Murali, Associate ProfessorDr. A. Arul Jeya Kumar, Associate ProfessorDr. Sumit Pramanik, Research Associate ProfessorDr. A. Vijaya, Assistant ProfessorDr. I. Infanta Mary Priya, Assistant ProfessorDr. T. Geethapriyan, Assistant ProfessorDr. T. Deepan Bharathi Kannan, Assistant ProfessorDr. S. Madhavan, Assistant ProfessorDr. N. Harshavardhana, Assistant Professor
NATIONAL ADVISORY COMMITTEE
Dr. N. Arunachalam, IIT MadrasDr. I. A. Palani, IIT Indore Dr. K. Raghukandan, Annamalai University
Dr. A. Velayutham, Scientist-F, CVRDE, Chennai Dr. T. Senthil Velan, Pondicherry Engineering College Dr. A. Siddharthan, MIT Campus, Anna UniversityDr. A. Arockiarajan, IIT MadrasDr. D. Lenin Singaravelu, NIT, TiruchirappalliDr. S. Jerome, NIT, TiruchirappalliDr. A. K. Lakshminarayanan, SSN Engineering CollegeDr. S. Gunti, DGM-Mahindra & Mahindra, Chennai Dr. G. Rajaram, Manager - R&D, National Engg. Industries Ltd.Dr. V. S. Senthil Kumar, Anna University Mr. G. S. Shankar, Caterpillar IndiaDr. S. Aravindan, IIT DelhiDr. P. Hariharan, Anna UniversityDr. M. Kanthababu, Anna UniversityDr. L. Vijayaragavan, IIT Madras Dr. Vijay kumar Pal, IIT JammuDr. Manidipto Mukherjee, CSIR-CMERI, DurgapurDr. V. Muthupandi, NIT TiruchirappalliCapt. Dr. A. Suresh Babu, Anna UniversityDr. S. Balasivanandha Prabu, Anna University
INTERNATIONAL ADVISORY COMMITTEE
Dr. Jaharah A. Ghani, University Kebangsaan, MalaysiaDr. Kyung-Sun Lee, Catholic University of Pusan, KoreaDr. Debes Bhattacharyya, University of Auckland, New Zealand Dr. J. N. Reddy, Texas A&M University, USA Dr. J. Paulo Davim, University of Aveiro, Portugal Dr. S. Viswanath, National Institute of Sports, Malaysia Dr. Mohan Ranganathan, University of Tours, FranceDr. Se Jin Park, KRISS, South Korea Dr. M. S. J. Hashmi, Dublin City University, IrelandDr. Nik Rosli Abdullah, Universiti Teknologi MARA, MalaysiaDr. Viorel Paleu, Technical University, RomaniaDr. Ali Sabea Hammood, University of Kufa, IraqDr. Manoj Gupta, National university of Singapore, SingaporeDr. S. Vincent, BITS Pilani, Dubai Dr. Abdolvahed Kami, Semnan University, IranDr. Seung Nam Min, Shinsung University, South KoreaDr. Pierre-Henri Cornuault, Institut FEMTO-ST, Besançon, FranceDr. Zahrul Fuadi, Syiah Kuala University, IndonesiaDr. Hamid Reza Ghazvinloo, University of Semnan, IranDr. Saoussan El Mouhri, Laboratory of Materials, Metallurgy and Process Engineering, Morocco
PLENARY/KEYNOTE SPEAKERS
Dr. Jaharah A. Ghani, University Kebangsaan, MalaysiaDr. Nik Rosli Abdullah, Universiti Teknologi MARA, MalaysiaDr. Viorel Paleu, Technical University, RomaniaDr. Prashanth Konda Gokuldoss, Tallinn University of Technology, EstoniaDr. S. Viswanath, National Institute of Sports, MalaysiaDr. G. L. Samuel, IIT MadrasDr. R. Karthic Narayanan, IIITDM KancheepuramDr. R. Thyagarajan, NFTDC, HyderabadDr. Manidipto Mukherjee, CSIR-CMERI, DurgapurDr. Sagar Telrandhe, M/s. MRF R&D India Limited, ChennaiMr. Praveen Sankar, M/s Fronius India Private Limited, ChennaiDr. Munish Jindal, Hover Robotix. Delhi
SPONSORSHIPSpornship of ICRAMER 2021 conference is invited and the details are available in conference website (https://www.srmist.edu.in/icramer-2021/). An Abstract proceeding book will include all accepted technical papers and details of sponsors. The souvenir will include advertisements also for which tariff details are given in website.
ADDRESS FOR CORRESPONDENCE
Dr. M. Cheralathan, Convener - ICRAMER 2021, Professor and HeadDepartment of Mechanical EngineeringSRM Institute of Science and TechnologyKattankulathur Campus, Chengalpattu (DT), Chennai 603203, Tamil Nadu, India.Phone No: 044-27417823Email: [email protected]
CONTACT US
Dr. U. Mohammed Iqbal, Associate ProfessorMobile: +91 9600429006Dr. M. R. Stalin John, Associate ProfessorMobile: +91 9841105512Dr. I. Infanta Mary Priya, Assistant ProfessorMobile: +91 9841690443
Modeling, analysis, and simulation of manufacturing processesNano TechnologyNon Destructive TestingNon-Conventional Machining ProcessesPlastic processing technologyPowder metallurgy and ceramic formingPrecision Engineering Thermal aspects of metal cuttingTribology
IMPORTANT DATES
Submission of Abstract: 30th March 2021Acceptance Notification: 30th March 2021Submission of full paper: 30th March 2021Dead line for Registration: 31st March 2021Conference Date: 15-16 April 2021Please submit your abstracts (max. 150 words) by email to [email protected]. The abstract should contain the title of the paper, author’s name and affiliations, email address, contact person and keywords. The length of the abstract should not be more than 150 words and should be typed in Times New Roman with 12 font size.
PUBLICATIONSAll submitted papers will be subjected to peer review as per the journal norms (including similarity and plagiarism check less than 10%). Finally, all the accepted papers will be published in any one of the following listed Journals based on authors interest.
1. Journal of Engineering Research (Subjected to final peer review by journal policy)ISSN: 2307-1885Indexed: Scopus and Science Citation Index-Expanded (SCIE) IF: 0.3872. AIP Conference ProceedingsIndexed: Scopus ISSN: 0094-243XSNIP: 0.3143. International Journal of Vehicle Structures & Systems (ISSN No. 0975-3060 (Print), 0975-3540 (Online) Indexed: Scopus SNIP: 0.461The word/ Latex template for preparing the paper is available at ICRAMER 2021 website: https://www.srmist.edu.in/icramer-2021/ (* Upon acceptance of the articles, the publication charge of Rs. 7500/- per article will be collected for national participants and USD 100 for International Participants)
ABOUT SRM IST
SRM Institute of Science and Technology (formerly known as 'SRM University') is located in an extensive sylvan campus of 380 acres skirting the National Highways (NH145), in the outskirts of Chennai. SRMIST is one of the top ranking Universities and most premier engineering destinations in India, which was established in 1985 by the Founder Chancellor, Dr. T.R. Paarivendhar. Now it is functioning in campuses located at Kattankulathur, Ramapuram Part (Vadapalani) and Ramapuram in Chennai and one in Modi Nagar, Ghaziabad with over 52000 students and 3200 faculty members, offering wide range of undergraduate, postgraduate and doctoral programs in Engineering, Management, Medicine & Health Sciences, Agriculture, Law and Science & Humanities. The Institution has moved up through international alliances and collaborative initiatives to achieve global excellence. SRMIST also collaborates with various foreign Universities. Now the Institute enjoys an unsurpassed reputation in academic and corporate circles being the preferred manpower source for vision to be recognized as a world - class learning institution. SRMIST has been accorded Category I status by MHRD-UGC of Government of India and also accredited by NAAC with 'A++' Grade in the year 2018.
ABOUT DEPARTMENT OF MECHANICAL ENGINEERING, SRM IST
The Department of Mechanical Engineering is one of the pioneering departments of SRMIST. The department is functionally divided into three broad areas of specialization: (i) Design (ii) Manufacturing and (iii) Thermal. B.Tech Mechanical Engineering program at Kattankulathur campus is accredited by Engineering Accreditation Commission (EAC) of ABET, USA, (www.abet.org). The department also offers M.Tech. and Doctoral programs in various specializations. The present faculty strength is 124. About 800 + research papers and 850 + conference papers have been published in national and international levels. More than 30 patents have been filed in national and international levels. The following salient workshops and conferences was conducted by the Department of Mechanical Engineering, KTR: International Conference on Advances in Mechanical Engineering in the year 2006, Short Course on Mechanics of Composite Materials and Structures: workshop on Development, Manufacturing and Analysis of Advanced Composites and short course on FEM in the year 2015, National Conference on Advances in Mechanical Engineering (NCAME 2016), Brain Wave Robotics, in the year 2017, Second International Conference on Advances in Mechanical Engineering (ICAME 2018) and Third international Conference on Advances in Mechanical Engineering ICAME 2020.
ABOUT THE CONFERENCE
Manufacturing industry is the backbone of any modern economy and manufacturing engineering is associated with providing the processes and systems to meet the demands of this sector. With the globalization of the world economy is emerging as one of the key manufacturing hubs and there is considerable demand from industry for manufacturing engineers capable of meeting the challenging requirements. The role of manufacturing in the country’s economy and societal development has long been established through their wealth creation activities. To broaden our knowledge in manufacturing and to increase innovation and responsiveness to ever increasing international needs, more in depth studies are critically needed at this juncture of global competitive scenario.
CALL FOR PAPERS
The aim of ICRAMER 2021 is to bring together specialists and practitioners from industry. R&D institutes and academicians and to provide the forum for exchange of ideas. It also provides a premier interdisciplinary platform for researchers, practitioners, and educators to present and discuss the most recent innovations, trends, and concerns as well as practical challenges encountered and solutions adopted in the fields of recent advances in manufacturing engineering research and applications.
TOPICS
Advance Optimization and charterization techniques Advances in Additive Manufacturing Advances in Machine Tool Design Advances in Materials Technology Advances in Metal Cutting TechnologyAdvances in Metal JoiningAdvances in Metal FormingArtificial Intelligence and RoboticsAutomation and Smart Systems Bio MaterialsCAD/CAM/CAE/Reverse EngineeringCellular manufacturingCharacterization and TestingCoatings and Surface EngineeringComposite and Polymer Processing Composite materialsComputer aided inspectionCryogenic aspects of metal cuttingEnergy Beam Processing Green and Sustainable Manufacturing Hybrid Manufacturing Processes and Technology Industry 4.0Laser based manufacturingMachine visionManufacturing process planning and schedulingMaterials behaviorMechanical dynamics and vibrationMechanical strengthMEMS/NEMSMetrology and Quality Micro and Nano Manufacturing
REGISTRATION
Category National International
Student Authors & Full Time Research Scholars Faculty INR 500 USD 10 Industry INR 1000 USD 20
* E - Certificate for all authorsBANK DETAILS
Account Name : Mechanical Engineering AssociationAccount No. : 459777734Name of the Bank : Indian BankIFSC Code : IDIB000S181MICR No. : 600019171
FOR REGISTRATION
Submit Abstract: : [email protected] : https://www.srmist.edu.in/icramer-2021/
REGISTRATION LINK:
https://forms.gle/pLh53s3LMPhWaJ8i7
CHIEF PATRONS
Dr. T. R. Paarivendhar, Chancellor SRMISTShri. Ravi Pachamoothoo, Pro - Chancellor (Administration), SRMISTDr. P. Sathyanarayanan, Pro - Chancellor (Academics), SRMISTDr. R. Shivakumar, Vice President, SRMISTDr. Sandeep Sancheti, Vice Chancellor, SRMIST
CHAIRPERSON OF ORGANIZING COMMITTEE
Dr. C. Muthamizhchelvan, Pro-Vice Chancellor (Engineering & Technology), SRM IST
CO-CHAIRPERSONS OF ORGANIZING COMMITTEE
Dr. T. V. Gopal, Dean, College of Engineering and Technology, SRM ISTDr. D Kingsly Jeba Singh, Chairperson, School of Mechanical Engineering, SRM IST
CONVENER
Dr. M. Cheralathan, Professor and Head, Department of Mechanical Engineering
CO-CONVENER
Dr. U. Mohammed IqbalAssociate Professor and Manufacturing Division HeadDepartment of Mechanical Engineering
ORGANIZING SECRETARIES
Dr. M. R. Stalin John, Associate ProfessorDr. A. Razal Rose, Associate ProfessorDr. I. Infanta Mary Priya, Assistant ProfessorDr. N. Harshavardhana, Assistant ProfessorMr. J. Santhakumar, Assistant Professor
Department of Mechanical EngineeringSRM Institute of Science & TechnologyKattankulathur -603203. Chengalpattu (DT), Tamil Nadu, India.https://www.srmist.edu.in/icramer-2021/
TECHNICAL COMMITTEE MEMBERS
Dr. Shubhabrata Datta, Research ProfessorDr. S. Prabhu, ProfessorDr. T. Rajasekaran, ProfessorDr. A. Razal Rose, Associate ProfessorDr. U. Mohammed Iqbal, Associate ProfessorDr. M. R. Stalin John, Associate ProfessorDr. M. Prakash, Associate ProfessorDr. S. Murali, Associate ProfessorDr. A. Arul Jeya Kumar, Associate ProfessorDr. Sumit Pramanik, Research Associate ProfessorDr. A. Vijaya, Assistant ProfessorDr. I. Infanta Mary Priya, Assistant ProfessorDr. T. Geethapriyan, Assistant ProfessorDr. T. Deepan Bharathi Kannan, Assistant ProfessorDr. S. Madhavan, Assistant ProfessorDr. N. Harshavardhana, Assistant Professor
NATIONAL ADVISORY COMMITTEE
Dr. N. Arunachalam, IIT MadrasDr. I. A. Palani, IIT Indore Dr. K. Raghukandan, Annamalai University
Dr. A. Velayutham, Scientist-F, CVRDE, Chennai Dr. T. Senthil Velan, Pondicherry Engineering College Dr. A. Siddharthan, MIT Campus, Anna UniversityDr. A. Arockiarajan, IIT MadrasDr. D. Lenin Singaravelu, NIT, TiruchirappalliDr. S. Jerome, NIT, TiruchirappalliDr. A. K. Lakshminarayanan, SSN Engineering CollegeDr. S. Gunti, DGM-Mahindra & Mahindra, Chennai Dr. G. Rajaram, Manager - R&D, National Engg. Industries Ltd.Dr. V. S. Senthil Kumar, Anna University Mr. G. S. Shankar, Caterpillar IndiaDr. S. Aravindan, IIT DelhiDr. P. Hariharan, Anna UniversityDr. M. Kanthababu, Anna UniversityDr. L. Vijayaragavan, IIT Madras Dr. Vijay kumar Pal, IIT JammuDr. Manidipto Mukherjee, CSIR-CMERI, DurgapurDr. V. Muthupandi, NIT TiruchirappalliCapt. Dr. A. Suresh Babu, Anna UniversityDr. S. Balasivanandha Prabu, Anna University
INTERNATIONAL ADVISORY COMMITTEE
Dr. Jaharah A. Ghani, University Kebangsaan, MalaysiaDr. Kyung-Sun Lee, Catholic University of Pusan, KoreaDr. Debes Bhattacharyya, University of Auckland, New Zealand Dr. J. N. Reddy, Texas A&M University, USA Dr. J. Paulo Davim, University of Aveiro, Portugal Dr. S. Viswanath, National Institute of Sports, Malaysia Dr. Mohan Ranganathan, University of Tours, FranceDr. Se Jin Park, KRISS, South Korea Dr. M. S. J. Hashmi, Dublin City University, IrelandDr. Nik Rosli Abdullah, Universiti Teknologi MARA, MalaysiaDr. Viorel Paleu, Technical University, RomaniaDr. Ali Sabea Hammood, University of Kufa, IraqDr. Manoj Gupta, National university of Singapore, SingaporeDr. S. Vincent, BITS Pilani, Dubai Dr. Abdolvahed Kami, Semnan University, IranDr. Seung Nam Min, Shinsung University, South KoreaDr. Pierre-Henri Cornuault, Institut FEMTO-ST, Besançon, FranceDr. Zahrul Fuadi, Syiah Kuala University, IndonesiaDr. Hamid Reza Ghazvinloo, University of Semnan, IranDr. Saoussan El Mouhri, Laboratory of Materials, Metallurgy and Process Engineering, Morocco
PLENARY/KEYNOTE SPEAKERS
Dr. Jaharah A. Ghani, University Kebangsaan, MalaysiaDr. Nik Rosli Abdullah, Universiti Teknologi MARA, MalaysiaDr. Viorel Paleu, Technical University, RomaniaDr. Prashanth Konda Gokuldoss, Tallinn University of Technology, EstoniaDr. S. Viswanath, National Institute of Sports, MalaysiaDr. G. L. Samuel, IIT MadrasDr. R. Karthic Narayanan, IIITDM KancheepuramDr. R. Thyagarajan, NFTDC, HyderabadDr. Manidipto Mukherjee, CSIR-CMERI, DurgapurDr. Sagar Telrandhe, M/s. MRF R&D India Limited, ChennaiMr. Praveen Sankar, M/s Fronius India Private Limited, ChennaiDr. Munish Jindal, Hover Robotix. Delhi
SPONSORSHIPSpornship of ICRAMER 2021 conference is invited and the details are available in conference website (https://www.srmist.edu.in/icramer-2021/). An Abstract proceeding book will include all accepted technical papers and details of sponsors. The souvenir will include advertisements also for which tariff details are given in website.
ADDRESS FOR CORRESPONDENCE
Dr. M. Cheralathan, Convener - ICRAMER 2021, Professor and HeadDepartment of Mechanical EngineeringSRM Institute of Science and TechnologyKattankulathur Campus, Chengalpattu (DT), Chennai 603203, Tamil Nadu, India.Phone No: 044-27417823Email: [email protected]
CONTACT US
Dr. U. Mohammed Iqbal, Associate ProfessorMobile: +91 9600429006Dr. M. R. Stalin John, Associate ProfessorMobile: +91 9841105512Dr. I. Infanta Mary Priya, Assistant ProfessorMobile: +91 9841690443
Modeling, analysis, and simulation of manufacturing processesNano TechnologyNon Destructive TestingNon-Conventional Machining ProcessesPlastic processing technologyPowder metallurgy and ceramic formingPrecision Engineering Thermal aspects of metal cuttingTribology
IMPORTANT DATES
Submission of Abstract: 30th March 2021Acceptance Notification: 30th March 2021Submission of full paper: 30th March 2021Dead line for Registration: 31st March 2021Conference Date: 15-16 April 2021Please submit your abstracts (max. 150 words) by email to [email protected]. The abstract should contain the title of the paper, author’s name and affiliations, email address, contact person and keywords. The length of the abstract should not be more than 150 words and should be typed in Times New Roman with 12 font size.
PUBLICATIONSAll submitted papers will be subjected to peer review as per the journal norms (including similarity and plagiarism check less than 10%). Finally, all the accepted papers will be published in any one of the following listed Journals based on authors interest.
1. Journal of Engineering Research (Subjected to final peer review by journal policy)ISSN: 2307-1885Indexed: Scopus and Science Citation Index-Expanded (SCIE) IF: 0.3872. AIP Conference ProceedingsIndexed: Scopus ISSN: 0094-243XSNIP: 0.3143. International Journal of Vehicle Structures & Systems (ISSN No. 0975-3060 (Print), 0975-3540 (Online) Indexed: Scopus SNIP: 0.461The word/ Latex template for preparing the paper is available at ICRAMER 2021 website: https://www.srmist.edu.in/icramer-2021/ (* Upon acceptance of the articles, the publication charge of Rs. 7500/- per article will be collected for national participants and USD 100 for International Participants)
ABOUT SRM IST
SRM Institute of Science and Technology (formerly known as 'SRM University') is located in an extensive sylvan campus of 380 acres skirting the National Highways (NH145), in the outskirts of Chennai. SRMIST is one of the top ranking Universities and most premier engineering destinations in India, which was established in 1985 by the Founder Chancellor, Dr. T.R. Paarivendhar. Now it is functioning in campuses located at Kattankulathur, Ramapuram Part (Vadapalani) and Ramapuram in Chennai and one in Modi Nagar, Ghaziabad with over 52000 students and 3200 faculty members, offering wide range of undergraduate, postgraduate and doctoral programs in Engineering, Management, Medicine & Health Sciences, Agriculture, Law and Science & Humanities. The Institution has moved up through international alliances and collaborative initiatives to achieve global excellence. SRMIST also collaborates with various foreign Universities. Now the Institute enjoys an unsurpassed reputation in academic and corporate circles being the preferred manpower source for vision to be recognized as a world - class learning institution. SRMIST has been accorded Category I status by MHRD-UGC of Government of India and also accredited by NAAC with 'A++' Grade in the year 2018.
ABOUT DEPARTMENT OF MECHANICAL ENGINEERING, SRM IST
The Department of Mechanical Engineering is one of the pioneering departments of SRMIST. The department is functionally divided into three broad areas of specialization: (i) Design (ii) Manufacturing and (iii) Thermal. B.Tech Mechanical Engineering program at Kattankulathur campus is accredited by Engineering Accreditation Commission (EAC) of ABET, USA, (www.abet.org). The department also offers M.Tech. and Doctoral programs in various specializations. The present faculty strength is 124. About 800 + research papers and 850 + conference papers have been published in national and international levels. More than 30 patents have been filed in national and international levels. The following salient workshops and conferences was conducted by the Department of Mechanical Engineering, KTR: International Conference on Advances in Mechanical Engineering in the year 2006, Short Course on Mechanics of Composite Materials and Structures: workshop on Development, Manufacturing and Analysis of Advanced Composites and short course on FEM in the year 2015, National Conference on Advances in Mechanical Engineering (NCAME 2016), Brain Wave Robotics, in the year 2017, Second International Conference on Advances in Mechanical Engineering (ICAME 2018) and Third international Conference on Advances in Mechanical Engineering ICAME 2020.
ABOUT THE CONFERENCE
Manufacturing industry is the backbone of any modern economy and manufacturing engineering is associated with providing the processes and systems to meet the demands of this sector. With the globalization of the world economy is emerging as one of the key manufacturing hubs and there is considerable demand from industry for manufacturing engineers capable of meeting the challenging requirements. The role of manufacturing in the country’s economy and societal development has long been established through their wealth creation activities. To broaden our knowledge in manufacturing and to increase innovation and responsiveness to ever increasing international needs, more in depth studies are critically needed at this juncture of global competitive scenario.
CALL FOR PAPERS
The aim of ICRAMER 2021 is to bring together specialists and practitioners from industry. R&D institutes and academicians and to provide the forum for exchange of ideas. It also provides a premier interdisciplinary platform for researchers, practitioners, and educators to present and discuss the most recent innovations, trends, and concerns as well as practical challenges encountered and solutions adopted in the fields of recent advances in manufacturing engineering research and applications.
TOPICS
Advance Optimization and charterization techniques Advances in Additive Manufacturing Advances in Machine Tool Design Advances in Materials Technology Advances in Metal Cutting TechnologyAdvances in Metal JoiningAdvances in Metal FormingArtificial Intelligence and RoboticsAutomation and Smart Systems Bio MaterialsCAD/CAM/CAE/Reverse EngineeringCellular manufacturingCharacterization and TestingCoatings and Surface EngineeringComposite and Polymer Processing Composite materialsComputer aided inspectionCryogenic aspects of metal cuttingEnergy Beam Processing Green and Sustainable Manufacturing Hybrid Manufacturing Processes and Technology Industry 4.0Laser based manufacturingMachine visionManufacturing process planning and schedulingMaterials behaviorMechanical dynamics and vibrationMechanical strengthMEMS/NEMSMetrology and Quality Micro and Nano Manufacturing
REGISTRATION
Category National International
Student Authors & Full Time Research Scholars Faculty INR 500 USD 10 Industry INR 1000 USD 20
* E - Certificate for all authorsBANK DETAILS
Account Name : Mechanical Engineering AssociationAccount No. : 459777734Name of the Bank : Indian BankIFSC Code : IDIB000S181MICR No. : 600019171
FOR REGISTRATION
Submit Abstract: : [email protected] : https://www.srmist.edu.in/icramer-2021/
REGISTRATION LINK:
https://forms.gle/pLh53s3LMPhWaJ8i7
CHIEF PATRONS
Dr. T. R. Paarivendhar, Chancellor SRMISTShri. Ravi Pachamoothoo, Pro - Chancellor (Administration), SRMISTDr. P. Sathyanarayanan, Pro - Chancellor (Academics), SRMISTDr. R. Shivakumar, Vice President, SRMISTDr. Sandeep Sancheti, Vice Chancellor, SRMIST
CHAIRPERSON OF ORGANIZING COMMITTEE
Dr. C. Muthamizhchelvan, Pro-Vice Chancellor (Engineering & Technology), SRM IST
CO-CHAIRPERSONS OF ORGANIZING COMMITTEE
Dr. T. V. Gopal, Dean, College of Engineering and Technology, SRM ISTDr. D Kingsly Jeba Singh, Chairperson, School of Mechanical Engineering, SRM IST
CONVENER
Dr. M. Cheralathan, Professor and Head, Department of Mechanical Engineering
CO-CONVENER
Dr. U. Mohammed IqbalAssociate Professor and Manufacturing Division HeadDepartment of Mechanical Engineering
ORGANIZING SECRETARIES
Dr. M. R. Stalin John, Associate ProfessorDr. A. Razal Rose, Associate ProfessorDr. I. Infanta Mary Priya, Assistant ProfessorDr. N. Harshavardhana, Assistant ProfessorMr. J. Santhakumar, Assistant Professor
Department of Mechanical EngineeringSRM Institute of Science & TechnologyKattankulathur -603203. Chengalpattu (DT), Tamil Nadu, India.https://www.srmist.edu.in/icramer-2021/
TECHNICAL COMMITTEE MEMBERS
Dr. Shubhabrata Datta, Research ProfessorDr. S. Prabhu, ProfessorDr. T. Rajasekaran, ProfessorDr. A. Razal Rose, Associate ProfessorDr. U. Mohammed Iqbal, Associate ProfessorDr. M. R. Stalin John, Associate ProfessorDr. M. Prakash, Associate ProfessorDr. S. Murali, Associate ProfessorDr. A. Arul Jeya Kumar, Associate ProfessorDr. Sumit Pramanik, Research Associate ProfessorDr. A. Vijaya, Assistant ProfessorDr. I. Infanta Mary Priya, Assistant ProfessorDr. T. Geethapriyan, Assistant ProfessorDr. T. Deepan Bharathi Kannan, Assistant ProfessorDr. S. Madhavan, Assistant ProfessorDr. N. Harshavardhana, Assistant Professor
NATIONAL ADVISORY COMMITTEE
Dr. N. Arunachalam, IIT MadrasDr. I. A. Palani, IIT Indore Dr. K. Raghukandan, Annamalai University
Dr. A. Velayutham, Scientist-F, CVRDE, Chennai Dr. T. Senthil Velan, Pondicherry Engineering College Dr. A. Siddharthan, MIT Campus, Anna UniversityDr. A. Arockiarajan, IIT MadrasDr. D. Lenin Singaravelu, NIT, TiruchirappalliDr. S. Jerome, NIT, TiruchirappalliDr. A. K. Lakshminarayanan, SSN Engineering CollegeDr. S. Gunti, DGM-Mahindra & Mahindra, Chennai Dr. G. Rajaram, Manager - R&D, National Engg. Industries Ltd.Dr. V. S. Senthil Kumar, Anna University Mr. G. S. Shankar, Caterpillar IndiaDr. S. Aravindan, IIT DelhiDr. P. Hariharan, Anna UniversityDr. M. Kanthababu, Anna UniversityDr. L. Vijayaragavan, IIT Madras Dr. Vijay kumar Pal, IIT JammuDr. Manidipto Mukherjee, CSIR-CMERI, DurgapurDr. V. Muthupandi, NIT TiruchirappalliCapt. Dr. A. Suresh Babu, Anna UniversityDr. S. Balasivanandha Prabu, Anna University
INTERNATIONAL ADVISORY COMMITTEE
Dr. Jaharah A. Ghani, University Kebangsaan, MalaysiaDr. Kyung-Sun Lee, Catholic University of Pusan, KoreaDr. Debes Bhattacharyya, University of Auckland, New Zealand Dr. J. N. Reddy, Texas A&M University, USA Dr. J. Paulo Davim, University of Aveiro, Portugal Dr. S. Viswanath, National Institute of Sports, Malaysia Dr. Mohan Ranganathan, University of Tours, FranceDr. Se Jin Park, KRISS, South Korea Dr. M. S. J. Hashmi, Dublin City University, IrelandDr. Nik Rosli Abdullah, Universiti Teknologi MARA, MalaysiaDr. Viorel Paleu, Technical University, RomaniaDr. Ali Sabea Hammood, University of Kufa, IraqDr. Manoj Gupta, National university of Singapore, SingaporeDr. S. Vincent, BITS Pilani, Dubai Dr. Abdolvahed Kami, Semnan University, IranDr. Seung Nam Min, Shinsung University, South KoreaDr. Pierre-Henri Cornuault, Institut FEMTO-ST, Besançon, FranceDr. Zahrul Fuadi, Syiah Kuala University, IndonesiaDr. Hamid Reza Ghazvinloo, University of Semnan, IranDr. Saoussan El Mouhri, Laboratory of Materials, Metallurgy and Process Engineering, Morocco
PLENARY/KEYNOTE SPEAKERS
Dr. Jaharah A. Ghani, University Kebangsaan, MalaysiaDr. Nik Rosli Abdullah, Universiti Teknologi MARA, MalaysiaDr. Viorel Paleu, Technical University, RomaniaDr. Prashanth Konda Gokuldoss, Tallinn University of Technology, EstoniaDr. S. Viswanath, National Institute of Sports, MalaysiaDr. G. L. Samuel, IIT MadrasDr. R. Karthic Narayanan, IIITDM KancheepuramDr. R. Thyagarajan, NFTDC, HyderabadDr. Manidipto Mukherjee, CSIR-CMERI, DurgapurDr. Sagar Telrandhe, M/s. MRF R&D India Limited, ChennaiMr. Praveen Sankar, M/s Fronius India Private Limited, ChennaiDr. Munish Jindal, Hover Robotix. Delhi
SPONSORSHIPSpornship of ICRAMER 2021 conference is invited and the details are available in conference website (https://www.srmist.edu.in/icramer-2021/). An Abstract proceeding book will include all accepted technical papers and details of sponsors. The souvenir will include advertisements also for which tariff details are given in website.
ADDRESS FOR CORRESPONDENCE
Dr. M. Cheralathan, Convener - ICRAMER 2021, Professor and HeadDepartment of Mechanical EngineeringSRM Institute of Science and TechnologyKattankulathur Campus, Chengalpattu (DT), Chennai 603203, Tamil Nadu, India.Phone No: 044-27417823Email: [email protected]
CONTACT US
Dr. U. Mohammed Iqbal, Associate ProfessorMobile: +91 9600429006Dr. M. R. Stalin John, Associate ProfessorMobile: +91 9841105512Dr. I. Infanta Mary Priya, Assistant ProfessorMobile: +91 9841690443
Modeling, analysis, and simulation of manufacturing processesNano TechnologyNon Destructive TestingNon-Conventional Machining ProcessesPlastic processing technologyPowder metallurgy and ceramic formingPrecision Engineering Thermal aspects of metal cuttingTribology
IMPORTANT DATES
Submission of Abstract: 30th March 2021Acceptance Notification: 30th March 2021Submission of full paper: 30th March 2021Dead line for Registration: 31st March 2021Conference Date: 15-16 April 2021Please submit your abstracts (max. 150 words) by email to [email protected]. The abstract should contain the title of the paper, author’s name and affiliations, email address, contact person and keywords. The length of the abstract should not be more than 150 words and should be typed in Times New Roman with 12 font size.
PUBLICATIONSAll submitted papers will be subjected to peer review as per the journal norms (including similarity and plagiarism check less than 10%). Finally, all the accepted papers will be published in any one of the following listed Journals based on authors interest.
1. Journal of Engineering Research (Subjected to final peer review by journal policy)ISSN: 2307-1885Indexed: Scopus and Science Citation Index-Expanded (SCIE) IF: 0.3872. AIP Conference ProceedingsIndexed: Scopus ISSN: 0094-243XSNIP: 0.3143. International Journal of Vehicle Structures & Systems (ISSN No. 0975-3060 (Print), 0975-3540 (Online) Indexed: Scopus SNIP: 0.461The word/ Latex template for preparing the paper is available at ICRAMER 2021 website: https://www.srmist.edu.in/icramer-2021/ (* Upon acceptance of the articles, the publication charge of Rs. 7500/- per article will be collected for national participants and USD 100 for International Participants)
ABOUT SRM IST
SRM Institute of Science and Technology (formerly known as 'SRM University') is located in an extensive sylvan campus of 380 acres skirting the National Highways (NH145), in the outskirts of Chennai. SRMIST is one of the top ranking Universities and most premier engineering destinations in India, which was established in 1985 by the Founder Chancellor, Dr. T.R. Paarivendhar. Now it is functioning in campuses located at Kattankulathur, Ramapuram Part (Vadapalani) and Ramapuram in Chennai and one in Modi Nagar, Ghaziabad with over 52000 students and 3200 faculty members, offering wide range of undergraduate, postgraduate and doctoral programs in Engineering, Management, Medicine & Health Sciences, Agriculture, Law and Science & Humanities. The Institution has moved up through international alliances and collaborative initiatives to achieve global excellence. SRMIST also collaborates with various foreign Universities. Now the Institute enjoys an unsurpassed reputation in academic and corporate circles being the preferred manpower source for vision to be recognized as a world - class learning institution. SRMIST has been accorded Category I status by MHRD-UGC of Government of India and also accredited by NAAC with 'A++' Grade in the year 2018.
ABOUT DEPARTMENT OF MECHANICAL ENGINEERING, SRM IST
The Department of Mechanical Engineering is one of the pioneering departments of SRMIST. The department is functionally divided into three broad areas of specialization: (i) Design (ii) Manufacturing and (iii) Thermal. B.Tech Mechanical Engineering program at Kattankulathur campus is accredited by Engineering Accreditation Commission (EAC) of ABET, USA, (www.abet.org). The department also offers M.Tech. and Doctoral programs in various specializations. The present faculty strength is 124. About 800 + research papers and 850 + conference papers have been published in national and international levels. More than 30 patents have been filed in national and international levels. The following salient workshops and conferences was conducted by the Department of Mechanical Engineering, KTR: International Conference on Advances in Mechanical Engineering in the year 2006, Short Course on Mechanics of Composite Materials and Structures: workshop on Development, Manufacturing and Analysis of Advanced Composites and short course on FEM in the year 2015, National Conference on Advances in Mechanical Engineering (NCAME 2016), Brain Wave Robotics, in the year 2017, Second International Conference on Advances in Mechanical Engineering (ICAME 2018) and Third international Conference on Advances in Mechanical Engineering ICAME 2020.
ABOUT THE CONFERENCE
Manufacturing industry is the backbone of any modern economy and manufacturing engineering is associated with providing the processes and systems to meet the demands of this sector. With the globalization of the world economy is emerging as one of the key manufacturing hubs and there is considerable demand from industry for manufacturing engineers capable of meeting the challenging requirements. The role of manufacturing in the country’s economy and societal development has long been established through their wealth creation activities. To broaden our knowledge in manufacturing and to increase innovation and responsiveness to ever increasing international needs, more in depth studies are critically needed at this juncture of global competitive scenario.
CALL FOR PAPERS
The aim of ICRAMER 2021 is to bring together specialists and practitioners from industry. R&D institutes and academicians and to provide the forum for exchange of ideas. It also provides a premier interdisciplinary platform for researchers, practitioners, and educators to present and discuss the most recent innovations, trends, and concerns as well as practical challenges encountered and solutions adopted in the fields of recent advances in manufacturing engineering research and applications.
TOPICS
Advance Optimization and charterization techniques Advances in Additive Manufacturing Advances in Machine Tool Design Advances in Materials Technology Advances in Metal Cutting TechnologyAdvances in Metal JoiningAdvances in Metal FormingArtificial Intelligence and RoboticsAutomation and Smart Systems Bio MaterialsCAD/CAM/CAE/Reverse EngineeringCellular manufacturingCharacterization and TestingCoatings and Surface EngineeringComposite and Polymer Processing Composite materialsComputer aided inspectionCryogenic aspects of metal cuttingEnergy Beam Processing Green and Sustainable Manufacturing Hybrid Manufacturing Processes and Technology Industry 4.0Laser based manufacturingMachine visionManufacturing process planning and schedulingMaterials behaviorMechanical dynamics and vibrationMechanical strengthMEMS/NEMSMetrology and Quality Micro and Nano Manufacturing
REGISTRATION
Category National International
Student Authors & Full Time Research Scholars Faculty INR 500 USD 10 Industry INR 1000 USD 20
* E - Certificate for all authorsBANK DETAILS
Account Name : Mechanical Engineering AssociationAccount No. : 459777734Name of the Bank : Indian BankIFSC Code : IDIB000S181MICR No. : 600019171
FOR REGISTRATION
Submit Abstract: : [email protected] : https://www.srmist.edu.in/icramer-2021/
REGISTRATION LINK:
https://forms.gle/pLh53s3LMPhWaJ8i7
CHIEF PATRONS
Dr. T. R. Paarivendhar, Chancellor SRMISTShri. Ravi Pachamoothoo, Pro - Chancellor (Administration), SRMISTDr. P. Sathyanarayanan, Pro - Chancellor (Academics), SRMISTDr. R. Shivakumar, Vice President, SRMISTDr. Sandeep Sancheti, Vice Chancellor, SRMIST
CHAIRPERSON OF ORGANIZING COMMITTEE
Dr. C. Muthamizhchelvan, Pro-Vice Chancellor (Engineering & Technology), SRM IST
CO-CHAIRPERSONS OF ORGANIZING COMMITTEE
Dr. T. V. Gopal, Dean, College of Engineering and Technology, SRM ISTDr. D Kingsly Jeba Singh, Chairperson, School of Mechanical Engineering, SRM IST
CONVENER
Dr. M. Cheralathan, Professor and Head, Department of Mechanical Engineering
CO-CONVENER
Dr. U. Mohammed IqbalAssociate Professor and Manufacturing Division HeadDepartment of Mechanical Engineering
ORGANIZING SECRETARIES
Dr. M. R. Stalin John, Associate ProfessorDr. A. Razal Rose, Associate ProfessorDr. I. Infanta Mary Priya, Assistant ProfessorDr. N. Harshavardhana, Assistant ProfessorMr. J. Santhakumar, Assistant Professor
Department of Mechanical EngineeringSRM Institute of Science & TechnologyKattankulathur -603203. Chengalpattu (DT), Tamil Nadu, India.https://www.srmist.edu.in/icramer-2021/
TECHNICAL COMMITTEE MEMBERS
Dr. Shubhabrata Datta, Research ProfessorDr. S. Prabhu, ProfessorDr. T. Rajasekaran, ProfessorDr. A. Razal Rose, Associate ProfessorDr. U. Mohammed Iqbal, Associate ProfessorDr. M. R. Stalin John, Associate ProfessorDr. M. Prakash, Associate ProfessorDr. S. Murali, Associate ProfessorDr. A. Arul Jeya Kumar, Associate ProfessorDr. Sumit Pramanik, Research Associate ProfessorDr. A. Vijaya, Assistant ProfessorDr. I. Infanta Mary Priya, Assistant ProfessorDr. T. Geethapriyan, Assistant ProfessorDr. T. Deepan Bharathi Kannan, Assistant ProfessorDr. S. Madhavan, Assistant ProfessorDr. N. Harshavardhana, Assistant Professor
NATIONAL ADVISORY COMMITTEE
Dr. N. Arunachalam, IIT MadrasDr. I. A. Palani, IIT Indore Dr. K. Raghukandan, Annamalai University
Dr. A. Velayutham, Scientist-F, CVRDE, Chennai Dr. T. Senthil Velan, Pondicherry Engineering College Dr. A. Siddharthan, MIT Campus, Anna UniversityDr. A. Arockiarajan, IIT MadrasDr. D. Lenin Singaravelu, NIT, TiruchirappalliDr. S. Jerome, NIT, TiruchirappalliDr. A. K. Lakshminarayanan, SSN Engineering CollegeDr. S. Gunti, DGM-Mahindra & Mahindra, Chennai Dr. G. Rajaram, Manager - R&D, National Engg. Industries Ltd.Dr. V. S. Senthil Kumar, Anna University Mr. G. S. Shankar, Caterpillar IndiaDr. S. Aravindan, IIT DelhiDr. P. Hariharan, Anna UniversityDr. M. Kanthababu, Anna UniversityDr. L. Vijayaragavan, IIT Madras Dr. Vijay kumar Pal, IIT JammuDr. Manidipto Mukherjee, CSIR-CMERI, DurgapurDr. V. Muthupandi, NIT TiruchirappalliCapt. Dr. A. Suresh Babu, Anna UniversityDr. S. Balasivanandha Prabu, Anna University
INTERNATIONAL ADVISORY COMMITTEE
Dr. Jaharah A. Ghani, University Kebangsaan, MalaysiaDr. Kyung-Sun Lee, Catholic University of Pusan, KoreaDr. Debes Bhattacharyya, University of Auckland, New Zealand Dr. J. N. Reddy, Texas A&M University, USA Dr. J. Paulo Davim, University of Aveiro, Portugal Dr. S. Viswanath, National Institute of Sports, Malaysia Dr. Mohan Ranganathan, University of Tours, FranceDr. Se Jin Park, KRISS, South Korea Dr. M. S. J. Hashmi, Dublin City University, IrelandDr. Nik Rosli Abdullah, Universiti Teknologi MARA, MalaysiaDr. Viorel Paleu, Technical University, RomaniaDr. Ali Sabea Hammood, University of Kufa, IraqDr. Manoj Gupta, National university of Singapore, SingaporeDr. S. Vincent, BITS Pilani, Dubai Dr. Abdolvahed Kami, Semnan University, IranDr. Seung Nam Min, Shinsung University, South KoreaDr. Pierre-Henri Cornuault, Institut FEMTO-ST, Besançon, FranceDr. Zahrul Fuadi, Syiah Kuala University, IndonesiaDr. Hamid Reza Ghazvinloo, University of Semnan, IranDr. Saoussan El Mouhri, Laboratory of Materials, Metallurgy and Process Engineering, Morocco
PLENARY/KEYNOTE SPEAKERS
Dr. Jaharah A. Ghani, University Kebangsaan, MalaysiaDr. Nik Rosli Abdullah, Universiti Teknologi MARA, MalaysiaDr. Viorel Paleu, Technical University, RomaniaDr. Prashanth Konda Gokuldoss, Tallinn University of Technology, EstoniaDr. S. Viswanath, National Institute of Sports, MalaysiaDr. G. L. Samuel, IIT MadrasDr. R. Karthic Narayanan, IIITDM KancheepuramDr. R. Thyagarajan, NFTDC, HyderabadDr. Manidipto Mukherjee, CSIR-CMERI, DurgapurDr. Sagar Telrandhe, M/s. MRF R&D India Limited, ChennaiMr. Praveen Sankar, M/s Fronius India Private Limited, ChennaiDr. Munish Jindal, Hover Robotix. Delhi
SPONSORSHIPSpornship of ICRAMER 2021 conference is invited and the details are available in conference website (https://www.srmist.edu.in/icramer-2021/). An Abstract proceeding book will include all accepted technical papers and details of sponsors. The souvenir will include advertisements also for which tariff details are given in website.
ADDRESS FOR CORRESPONDENCE
Dr. M. Cheralathan, Convener - ICRAMER 2021, Professor and HeadDepartment of Mechanical EngineeringSRM Institute of Science and TechnologyKattankulathur Campus, Chengalpattu (DT), Chennai 603203, Tamil Nadu, India.Phone No: 044-27417823Email: [email protected]
CONTACT US
Dr. U. Mohammed Iqbal, Associate ProfessorMobile: +91 9600429006Dr. M. R. Stalin John, Associate ProfessorMobile: +91 9841105512Dr. I. Infanta Mary Priya, Assistant ProfessorMobile: +91 9841690443
Modeling, analysis, and simulation of manufacturing processesNano TechnologyNon Destructive TestingNon-Conventional Machining ProcessesPlastic processing technologyPowder metallurgy and ceramic formingPrecision Engineering Thermal aspects of metal cuttingTribology
IMPORTANT DATES
Submission of Abstract: 30th March 2021Acceptance Notification: 30th March 2021Submission of full paper: 30th March 2021Dead line for Registration: 31st March 2021Conference Date: 15-16 April 2021Please submit your abstracts (max. 150 words) by email to [email protected]. The abstract should contain the title of the paper, author’s name and affiliations, email address, contact person and keywords. The length of the abstract should not be more than 150 words and should be typed in Times New Roman with 12 font size.
PUBLICATIONSAll submitted papers will be subjected to peer review as per the journal norms (including similarity and plagiarism check less than 10%). Finally, all the accepted papers will be published in any one of the following listed Journals based on authors interest.
1. Journal of Engineering Research (Subjected to final peer review by journal policy)ISSN: 2307-1885Indexed: Scopus and Science Citation Index-Expanded (SCIE) IF: 0.3872. AIP Conference ProceedingsIndexed: Scopus ISSN: 0094-243XSNIP: 0.3143. International Journal of Vehicle Structures & Systems (ISSN No. 0975-3060 (Print), 0975-3540 (Online) Indexed: Scopus SNIP: 0.461The word/ Latex template for preparing the paper is available at ICRAMER 2021 website: https://www.srmist.edu.in/icramer-2021/ (* Upon acceptance of the articles, the publication charge of Rs. 7500/- per article will be collected for national participants and USD 100 for International Participants)
INR 250 USD 05
ABOUT SRM IST
SRM Institute of Science and Technology (formerly known as 'SRM University') is located in an extensive sylvan campus of 380 acres skirting the National Highways (NH145), in the outskirts of Chennai. SRMIST is one of the top ranking Universities and most premier engineering destinations in India, which was established in 1985 by the Founder Chancellor, Dr. T.R. Paarivendhar. Now it is functioning in campuses located at Kattankulathur, Ramapuram Part (Vadapalani) and Ramapuram in Chennai and one in Modi Nagar, Ghaziabad with over 52000 students and 3200 faculty members, offering wide range of undergraduate, postgraduate and doctoral programs in Engineering, Management, Medicine & Health Sciences, Agriculture, Law and Science & Humanities. The Institution has moved up through international alliances and collaborative initiatives to achieve global excellence. SRMIST also collaborates with various foreign Universities. Now the Institute enjoys an unsurpassed reputation in academic and corporate circles being the preferred manpower source for vision to be recognized as a world - class learning institution. SRMIST has been accorded Category I status by MHRD-UGC of Government of India and also accredited by NAAC with 'A++' Grade in the year 2018.
ABOUT DEPARTMENT OF MECHANICAL ENGINEERING, SRM IST
The Department of Mechanical Engineering is one of the pioneering departments of SRMIST. The department is functionally divided into three broad areas of specialization: (i) Design (ii) Manufacturing and (iii) Thermal. B.Tech Mechanical Engineering program at Kattankulathur campus is accredited by Engineering Accreditation Commission (EAC) of ABET, USA, (www.abet.org). The department also offers M.Tech. and Doctoral programs in various specializations. The present faculty strength is 124. About 800 + research papers and 850 + conference papers have been published in national and international levels. More than 30 patents have been filed in national and international levels. The following salient workshops and conferences was conducted by the Department of Mechanical Engineering, KTR: International Conference on Advances in Mechanical Engineering in the year 2006, Short Course on Mechanics of Composite Materials and Structures: workshop on Development, Manufacturing and Analysis of Advanced Composites and short course on FEM in the year 2015, National Conference on Advances in Mechanical Engineering (NCAME 2016), Brain Wave Robotics, in the year 2017, Second International Conference on Advances in Mechanical Engineering (ICAME 2018) and Third international Conference on Advances in Mechanical Engineering ICAME 2020.
ABOUT THE CONFERENCE
Manufacturing industry is the backbone of any modern economy and manufacturing engineering is associated with providing the processes and systems to meet the demands of this sector. With the globalization of the world economy is emerging as one of the key manufacturing hubs and there is considerable demand from industry for manufacturing engineers capable of meeting the challenging requirements. The role of manufacturing in the country’s economy and societal development has long been established through their wealth creation activities. To broaden our knowledge in manufacturing and to increase innovation and responsiveness to ever increasing international needs, more in depth studies are critically needed at this juncture of global competitive scenario.
CALL FOR PAPERS
The aim of ICRAMER 2021 is to bring together specialists and practitioners from industry. R&D institutes and academicians and to provide the forum for exchange of ideas. It also provides a premier interdisciplinary platform for researchers, practitioners, and educators to present and discuss the most recent innovations, trends, and concerns as well as practical challenges encountered and solutions adopted in the fields of recent advances in manufacturing engineering research and applications.
TOPICS
Advance Optimization and charterization techniques Advances in Additive Manufacturing Advances in Machine Tool Design Advances in Materials Technology Advances in Metal Cutting TechnologyAdvances in Metal JoiningAdvances in Metal FormingArtificial Intelligence and RoboticsAutomation and Smart Systems Bio MaterialsCAD/CAM/CAE/Reverse EngineeringCellular manufacturingCharacterization and TestingCoatings and Surface EngineeringComposite and Polymer Processing Composite materialsComputer aided inspectionCryogenic aspects of metal cuttingEnergy Beam Processing Green and Sustainable Manufacturing Hybrid Manufacturing Processes and Technology Industry 4.0Laser based manufacturingMachine visionManufacturing process planning and schedulingMaterials behaviorMechanical dynamics and vibrationMechanical strengthMEMS/NEMSMetrology and Quality Micro and Nano Manufacturing
REGISTRATION
Category National International
Student Authors & Full Time Research Scholars Faculty INR 500 USD 10 Industry INR 1000 USD 20
* E - Certificate for all authorsBANK DETAILS
Account Name : Mechanical Engineering AssociationAccount No. : 459777734Name of the Bank : Indian BankIFSC Code : IDIB000S181MICR No. : 600019171
FOR REGISTRATION
Submit Abstract: : [email protected] : https://www.srmist.edu.in/icramer-2021/
REGISTRATION LINK:
https://forms.gle/pLh53s3LMPhWaJ8i7
CHIEF PATRONS
Dr. T. R. Paarivendhar, Chancellor SRMISTShri. Ravi Pachamoothoo, Pro - Chancellor (Administration), SRMISTDr. P. Sathyanarayanan, Pro - Chancellor (Academics), SRMISTDr. R. Shivakumar, Vice President, SRMISTDr. Sandeep Sancheti, Vice Chancellor, SRMIST
CHAIRPERSON OF ORGANIZING COMMITTEE
Dr. C. Muthamizhchelvan, Pro-Vice Chancellor (Engineering & Technology), SRM IST
CO-CHAIRPERSONS OF ORGANIZING COMMITTEE
Dr. T. V. Gopal, Dean, College of Engineering and Technology, SRM ISTDr. D Kingsly Jeba Singh, Chairperson, School of Mechanical Engineering, SRM IST
CONVENER
Dr. M. Cheralathan, Professor and Head, Department of Mechanical Engineering
CO-CONVENER
Dr. U. Mohammed IqbalAssociate Professor and Manufacturing Division HeadDepartment of Mechanical Engineering
ORGANIZING SECRETARIES
Dr. M. R. Stalin John, Associate ProfessorDr. A. Razal Rose, Associate ProfessorDr. I. Infanta Mary Priya, Assistant ProfessorDr. N. Harshavardhana, Assistant ProfessorMr. J. Santhakumar, Assistant Professor
Department of Mechanical EngineeringSRM Institute of Science & TechnologyKattankulathur -603203. Chengalpattu (DT), Tamil Nadu, India.https://www.srmist.edu.in/icramer-2021/
TECHNICAL COMMITTEE MEMBERS
Dr. Shubhabrata Datta, Research ProfessorDr. S. Prabhu, ProfessorDr. T. Rajasekaran, ProfessorDr. A. Razal Rose, Associate ProfessorDr. U. Mohammed Iqbal, Associate ProfessorDr. M. R. Stalin John, Associate ProfessorDr. M. Prakash, Associate ProfessorDr. S. Murali, Associate ProfessorDr. A. Arul Jeya Kumar, Associate ProfessorDr. Sumit Pramanik, Research Associate ProfessorDr. A. Vijaya, Assistant ProfessorDr. I. Infanta Mary Priya, Assistant ProfessorDr. T. Geethapriyan, Assistant ProfessorDr. T. Deepan Bharathi Kannan, Assistant ProfessorDr. S. Madhavan, Assistant ProfessorDr. N. Harshavardhana, Assistant Professor
NATIONAL ADVISORY COMMITTEE
Dr. N. Arunachalam, IIT MadrasDr. I. A. Palani, IIT Indore Dr. K. Raghukandan, Annamalai University
Dr. A. Velayutham, Scientist-F, CVRDE, Chennai Dr. T. Senthil Velan, Pondicherry Engineering College Dr. A. Siddharthan, MIT Campus, Anna UniversityDr. A. Arockiarajan, IIT MadrasDr. D. Lenin Singaravelu, NIT, TiruchirappalliDr. S. Jerome, NIT, TiruchirappalliDr. A. K. Lakshminarayanan, SSN Engineering CollegeDr. S. Gunti, DGM-Mahindra & Mahindra, Chennai Dr. G. Rajaram, Manager - R&D, National Engg. Industries Ltd.Dr. V. S. Senthil Kumar, Anna University Mr. G. S. Shankar, Caterpillar IndiaDr. S. Aravindan, IIT DelhiDr. P. Hariharan, Anna UniversityDr. M. Kanthababu, Anna UniversityDr. L. Vijayaragavan, IIT Madras Dr. Vijay kumar Pal, IIT JammuDr. Manidipto Mukherjee, CSIR-CMERI, DurgapurDr. V. Muthupandi, NIT TiruchirappalliCapt. Dr. A. Suresh Babu, Anna UniversityDr. S. Balasivanandha Prabu, Anna University
INTERNATIONAL ADVISORY COMMITTEE
Dr. Jaharah A. Ghani, University Kebangsaan, MalaysiaDr. Kyung-Sun Lee, Catholic University of Pusan, KoreaDr. Debes Bhattacharyya, University of Auckland, New Zealand Dr. J. N. Reddy, Texas A&M University, USA Dr. J. Paulo Davim, University of Aveiro, Portugal Dr. S. Viswanath, National Institute of Sports, Malaysia Dr. Mohan Ranganathan, University of Tours, FranceDr. Se Jin Park, KRISS, South Korea Dr. M. S. J. Hashmi, Dublin City University, IrelandDr. Nik Rosli Abdullah, Universiti Teknologi MARA, MalaysiaDr. Viorel Paleu, Technical University, RomaniaDr. Ali Sabea Hammood, University of Kufa, IraqDr. Manoj Gupta, National university of Singapore, SingaporeDr. S. Vincent, BITS Pilani, Dubai Dr. Abdolvahed Kami, Semnan University, IranDr. Seung Nam Min, Shinsung University, South KoreaDr. Pierre-Henri Cornuault, Institut FEMTO-ST, Besançon, FranceDr. Zahrul Fuadi, Syiah Kuala University, IndonesiaDr. Hamid Reza Ghazvinloo, University of Semnan, IranDr. Saoussan El Mouhri, Laboratory of Materials, Metallurgy and Process Engineering, Morocco
PLENARY/KEYNOTE SPEAKERS
Dr. Jaharah A. Ghani, University Kebangsaan, MalaysiaDr. Nik Rosli Abdullah, Universiti Teknologi MARA, MalaysiaDr. Viorel Paleu, Technical University, RomaniaDr. Prashanth Konda Gokuldoss, Tallinn University of Technology, EstoniaDr. S. Viswanath, National Institute of Sports, MalaysiaDr. G. L. Samuel, IIT MadrasDr. R. Karthic Narayanan, IIITDM KancheepuramDr. R. Thyagarajan, NFTDC, HyderabadDr. Manidipto Mukherjee, CSIR-CMERI, DurgapurDr. Sagar Telrandhe, M/s. MRF R&D India Limited, ChennaiMr. Praveen Sankar, M/s Fronius India Private Limited, ChennaiDr. Munish Jindal, Hover Robotix. Delhi
SPONSORSHIPSpornship of ICRAMER 2021 conference is invited and the details are available in conference website (https://www.srmist.edu.in/icramer-2021/). An Abstract proceeding book will include all accepted technical papers and details of sponsors. The souvenir will include advertisements also for which tariff details are given in website.
ADDRESS FOR CORRESPONDENCE
Dr. M. Cheralathan, Convener - ICRAMER 2021, Professor and HeadDepartment of Mechanical EngineeringSRM Institute of Science and TechnologyKattankulathur Campus, Chengalpattu (DT), Chennai 603203, Tamil Nadu, India.Phone No: 044-27417823Email: [email protected]
CONTACT US
Dr. U. Mohammed Iqbal, Associate ProfessorMobile: +91 9600429006Dr. M. R. Stalin John, Associate ProfessorMobile: +91 9841105512Dr. I. Infanta Mary Priya, Assistant ProfessorMobile: +91 9841690443
Modeling, analysis, and simulation of manufacturing processesNano TechnologyNon Destructive TestingNon-Conventional Machining ProcessesPlastic processing technologyPowder metallurgy and ceramic formingPrecision Engineering Thermal aspects of metal cuttingTribology
IMPORTANT DATES
Submission of Abstract: 30th March 2021Acceptance Notification: 30th March 2021Submission of full paper: 30th March 2021Dead line for Registration: 31st March 2021Conference Date: 15-16 April 2021Please submit your abstracts (max. 150 words) by email to [email protected]. The abstract should contain the title of the paper, author’s name and affiliations, email address, contact person and keywords. The length of the abstract should not be more than 150 words and should be typed in Times New Roman with 12 font size.
PUBLICATIONSAll submitted papers will be subjected to peer review as per the journal norms (including similarity and plagiarism check less than 10%). Finally, all the accepted papers will be published in any one of the following listed Journals based on authors interest.
1. Journal of Engineering Research (Subjected to final peer review by journal policy)ISSN: 2307-1885Indexed: Scopus and Science Citation Index-Expanded (SCIE) IF: 0.3872. AIP Conference ProceedingsIndexed: Scopus ISSN: 0094-243XSNIP: 0.3143. International Journal of Vehicle Structures & Systems (ISSN No. 0975-3060 (Print), 0975-3540 (Online) Indexed: Scopus SNIP: 0.461The word/ Latex template for preparing the paper is available at ICRAMER 2021 website: https://www.srmist.edu.in/icramer-2021/ (* Upon acceptance of the articles, the publication charge of Rs. 7500/- per article will be collected for national participants and USD 100 for International Participants)
ABOUT SRM IST
SRM Institute of Science and Technology (formerly known as 'SRM University') is located in an extensive sylvan campus of 380 acres skirting the National Highways (NH145), in the outskirts of Chennai. SRMIST is one of the top ranking Universities and most premier engineering destinations in India, which was established in 1985 by the Founder Chancellor, Dr. T.R. Paarivendhar. Now it is functioning in campuses located at Kattankulathur, Ramapuram Part (Vadapalani) and Ramapuram in Chennai and one in Modi Nagar, Ghaziabad with over 52000 students and 3200 faculty members, offering wide range of undergraduate, postgraduate and doctoral programs in Engineering, Management, Medicine & Health Sciences, Agriculture, Law and Science & Humanities. The Institution has moved up through international alliances and collaborative initiatives to achieve global excellence. SRMIST also collaborates with various foreign Universities. Now the Institute enjoys an unsurpassed reputation in academic and corporate circles being the preferred manpower source for vision to be recognized as a world - class learning institution. SRMIST has been accorded Category I status by MHRD-UGC of Government of India and also accredited by NAAC with 'A++' Grade in the year 2018.
ABOUT DEPARTMENT OF MECHANICAL ENGINEERING, SRM IST
The Department of Mechanical Engineering is one of the pioneering departments of SRMIST. The department is functionally divided into three broad areas of specialization: (i) Design (ii) Manufacturing and (iii) Thermal. B.Tech Mechanical Engineering program at Kattankulathur campus is accredited by Engineering Accreditation Commission (EAC) of ABET, USA, (www.abet.org). The department also offers M.Tech. and Doctoral programs in various specializations. The present faculty strength is 124. About 800 + research papers and 850 + conference papers have been published in national and international levels. More than 30 patents have been filed in national and international levels. The following salient workshops and conferences was conducted by the Department of Mechanical Engineering, KTR: International Conference on Advances in Mechanical Engineering in the year 2006, Short Course on Mechanics of Composite Materials and Structures: workshop on Development, Manufacturing and Analysis of Advanced Composites and short course on FEM in the year 2015, National Conference on Advances in Mechanical Engineering (NCAME 2016), Brain Wave Robotics, in the year 2017, Second International Conference on Advances in Mechanical Engineering (ICAME 2018) and Third international Conference on Advances in Mechanical Engineering ICAME 2020.
ABOUT THE CONFERENCE
Manufacturing industry is the backbone of any modern economy and manufacturing engineering is associated with providing the processes and systems to meet the demands of this sector. With the globalization of the world economy is emerging as one of the key manufacturing hubs and there is considerable demand from industry for manufacturing engineers capable of meeting the challenging requirements. The role of manufacturing in the country’s economy and societal development has long been established through their wealth creation activities. To broaden our knowledge in manufacturing and to increase innovation and responsiveness to ever increasing international needs, more in depth studies are critically needed at this juncture of global competitive scenario.
CALL FOR PAPERS
The aim of ICRAMER 2021 is to bring together specialists and practitioners from industry. R&D institutes and academicians and to provide the forum for exchange of ideas. It also provides a premier interdisciplinary platform for researchers, practitioners, and educators to present and discuss the most recent innovations, trends, and concerns as well as practical challenges encountered and solutions adopted in the fields of recent advances in manufacturing engineering research and applications.
TOPICS
Advance Optimization and charterization techniques Advances in Additive Manufacturing Advances in Machine Tool Design Advances in Materials Technology Advances in Metal Cutting TechnologyAdvances in Metal JoiningAdvances in Metal FormingArtificial Intelligence and RoboticsAutomation and Smart Systems Bio MaterialsCAD/CAM/CAE/Reverse EngineeringCellular manufacturingCharacterization and TestingCoatings and Surface EngineeringComposite and Polymer Processing Composite materialsComputer aided inspectionCryogenic aspects of metal cuttingEnergy Beam Processing Green and Sustainable Manufacturing Hybrid Manufacturing Processes and Technology Industry 4.0Laser based manufacturingMachine visionManufacturing process planning and schedulingMaterials behaviorMechanical dynamics and vibrationMechanical strengthMEMS/NEMSMetrology and Quality Micro and Nano Manufacturing
REGISTRATION
Category National International
Student Authors & Full Time Research Scholars Faculty INR 500 USD 10 Industry INR 1000 USD 20
* E - Certificate for all authorsBANK DETAILS
Account Name : Mechanical Engineering AssociationAccount No. : 459777734Name of the Bank : Indian BankIFSC Code : IDIB000S181MICR No. : 600019171
FOR REGISTRATION
Submit Abstract: : [email protected] : https://www.srmist.edu.in/icramer-2021/
REGISTRATION LINK:
https://forms.gle/pLh53s3LMPhWaJ8i7
CHIEF PATRONS
Dr. T. R. Paarivendhar, Chancellor SRMISTShri. Ravi Pachamoothoo, Pro - Chancellor (Administration), SRMISTDr. P. Sathyanarayanan, Pro - Chancellor (Academics), SRMISTDr. R. Shivakumar, Vice President, SRMISTDr. Sandeep Sancheti, Vice Chancellor, SRMIST
CHAIRPERSON OF ORGANIZING COMMITTEE
Dr. C. Muthamizhchelvan, Pro-Vice Chancellor (Engineering & Technology), SRM IST
CO-CHAIRPERSONS OF ORGANIZING COMMITTEE
Dr. T. V. Gopal, Dean, College of Engineering and Technology, SRM ISTDr. D Kingsly Jeba Singh, Chairperson, School of Mechanical Engineering, SRM IST
CONVENER
Dr. M. Cheralathan, Professor and Head, Department of Mechanical Engineering
CO-CONVENER
Dr. U. Mohammed IqbalAssociate Professor and Manufacturing Division HeadDepartment of Mechanical Engineering
ORGANIZING SECRETARIES
Dr. M. R. Stalin John, Associate ProfessorDr. A. Razal Rose, Associate ProfessorDr. I. Infanta Mary Priya, Assistant ProfessorDr. N. Harshavardhana, Assistant ProfessorMr. J. Santhakumar, Assistant Professor
Department of Mechanical EngineeringSRM Institute of Science & TechnologyKattankulathur -603203. Chengalpattu (DT), Tamil Nadu, India.https://www.srmist.edu.in/icramer-2021/
TECHNICAL COMMITTEE MEMBERS
Dr. Shubhabrata Datta, Research ProfessorDr. S. Prabhu, ProfessorDr. T. Rajasekaran, ProfessorDr. A. Razal Rose, Associate ProfessorDr. U. Mohammed Iqbal, Associate ProfessorDr. M. R. Stalin John, Associate ProfessorDr. M. Prakash, Associate ProfessorDr. S. Murali, Associate ProfessorDr. A. Arul Jeya Kumar, Associate ProfessorDr. Sumit Pramanik, Research Associate ProfessorDr. A. Vijaya, Assistant ProfessorDr. I. Infanta Mary Priya, Assistant ProfessorDr. T. Geethapriyan, Assistant ProfessorDr. T. Deepan Bharathi Kannan, Assistant ProfessorDr. S. Madhavan, Assistant ProfessorDr. N. Harshavardhana, Assistant Professor
NATIONAL ADVISORY COMMITTEE
Dr. N. Arunachalam, IIT MadrasDr. I. A. Palani, IIT Indore Dr. K. Raghukandan, Annamalai University
Dr. A. Velayutham, Scientist-F, CVRDE, Chennai Dr. T. Senthil Velan, Pondicherry Engineering College Dr. A. Siddharthan, MIT Campus, Anna UniversityDr. A. Arockiarajan, IIT MadrasDr. D. Lenin Singaravelu, NIT, TiruchirappalliDr. S. Jerome, NIT, TiruchirappalliDr. A. K. Lakshminarayanan, SSN Engineering CollegeDr. S. Gunti, DGM-Mahindra & Mahindra, Chennai Dr. G. Rajaram, Manager - R&D, National Engg. Industries Ltd.Dr. V. S. Senthil Kumar, Anna University Mr. G. S. Shankar, Caterpillar IndiaDr. S. Aravindan, IIT DelhiDr. P. Hariharan, Anna UniversityDr. M. Kanthababu, Anna UniversityDr. L. Vijayaragavan, IIT Madras Dr. Vijay kumar Pal, IIT JammuDr. Manidipto Mukherjee, CSIR-CMERI, DurgapurDr. V. Muthupandi, NIT TiruchirappalliCapt. Dr. A. Suresh Babu, Anna UniversityDr. S. Balasivanandha Prabu, Anna University
INTERNATIONAL ADVISORY COMMITTEE
Dr. Jaharah A. Ghani, University Kebangsaan, MalaysiaDr. Kyung-Sun Lee, Catholic University of Pusan, KoreaDr. Debes Bhattacharyya, University of Auckland, New Zealand Dr. J. N. Reddy, Texas A&M University, USA Dr. J. Paulo Davim, University of Aveiro, Portugal Dr. S. Viswanath, National Institute of Sports, Malaysia Dr. Mohan Ranganathan, University of Tours, FranceDr. Se Jin Park, KRISS, South Korea Dr. M. S. J. Hashmi, Dublin City University, IrelandDr. Nik Rosli Abdullah, Universiti Teknologi MARA, MalaysiaDr. Viorel Paleu, Technical University, RomaniaDr. Ali Sabea Hammood, University of Kufa, IraqDr. Manoj Gupta, National university of Singapore, SingaporeDr. S. Vincent, BITS Pilani, Dubai Dr. Abdolvahed Kami, Semnan University, IranDr. Seung Nam Min, Shinsung University, South KoreaDr. Pierre-Henri Cornuault, Institut FEMTO-ST, Besançon, FranceDr. Zahrul Fuadi, Syiah Kuala University, IndonesiaDr. Hamid Reza Ghazvinloo, University of Semnan, IranDr. Saoussan El Mouhri, Laboratory of Materials, Metallurgy and Process Engineering, Morocco
PLENARY/KEYNOTE SPEAKERS
Dr. Jaharah A. Ghani, University Kebangsaan, MalaysiaDr. Nik Rosli Abdullah, Universiti Teknologi MARA, MalaysiaDr. Viorel Paleu, Technical University, RomaniaDr. Prashanth Konda Gokuldoss, Tallinn University of Technology, EstoniaDr. S. Viswanath, National Institute of Sports, MalaysiaDr. G. L. Samuel, IIT MadrasDr. R. Karthic Narayanan, IIITDM KancheepuramDr. R. Thyagarajan, NFTDC, HyderabadDr. Manidipto Mukherjee, CSIR-CMERI, DurgapurDr. Sagar Telrandhe, M/s. MRF R&D India Limited, ChennaiMr. Praveen Sankar, M/s Fronius India Private Limited, ChennaiDr. Munish Jindal, Hover Robotix. Delhi
SPONSORSHIPSpornship of ICRAMER 2021 conference is invited and the details are available in conference website (https://www.srmist.edu.in/icramer-2021/). An Abstract proceeding book will include all accepted technical papers and details of sponsors. The souvenir will include advertisements also for which tariff details are given in website.
ADDRESS FOR CORRESPONDENCE
Dr. M. Cheralathan, Convener - ICRAMER 2021, Professor and HeadDepartment of Mechanical EngineeringSRM Institute of Science and TechnologyKattankulathur Campus, Chengalpattu (DT), Chennai 603203, Tamil Nadu, India.Phone No: 044-27417823Email: [email protected]
CONTACT US
Dr. U. Mohammed Iqbal, Associate ProfessorMobile: +91 9600429006Dr. M. R. Stalin John, Associate ProfessorMobile: +91 9841105512Dr. I. Infanta Mary Priya, Assistant ProfessorMobile: +91 9841690443
Modeling, analysis, and simulation of manufacturing processesNano TechnologyNon Destructive TestingNon-Conventional Machining ProcessesPlastic processing technologyPowder metallurgy and ceramic formingPrecision Engineering Thermal aspects of metal cuttingTribology
IMPORTANT DATES
Submission of Abstract: 30th March 2021Acceptance Notification: 30th March 2021Submission of full paper: 30th March 2021Dead line for Registration: 31st March 2021Conference Date: 15-16 April 2021Please submit your abstracts (max. 150 words) by email to [email protected]. The abstract should contain the title of the paper, author’s name and affiliations, email address, contact person and keywords. The length of the abstract should not be more than 150 words and should be typed in Times New Roman with 12 font size.
PUBLICATIONSAll submitted papers will be subjected to peer review as per the journal norms (including similarity and plagiarism check less than 10%). Finally, all the accepted papers will be published in any one of the following listed Journals based on authors interest.
1. Journal of Engineering Research (Subjected to final peer review by journal policy)ISSN: 2307-1885Indexed: Scopus and Science Citation Index-Expanded (SCIE) IF: 0.3872. AIP Conference ProceedingsIndexed: Scopus ISSN: 0094-243XSNIP: 0.3143. International Journal of Vehicle Structures & Systems (ISSN No. 0975-3060 (Print), 0975-3540 (Online) Indexed: Scopus SNIP: 0.461The word/ Latex template for preparing the paper is available at ICRAMER 2021 website: https://www.srmist.edu.in/icramer-2021/ (* Upon acceptance of the articles, the publication charge of Rs. 7500/- per article will be collected for national participants and USD 100 for International Participants)
ABOUT SRM IST
SRM Institute of Science and Technology (formerly known as 'SRM University') is located in an extensive sylvan campus of 380 acres skirting the National Highways (NH145), in the outskirts of Chennai. SRMIST is one of the top ranking Universities and most premier engineering destinations in India, which was established in 1985 by the Founder Chancellor, Dr. T.R. Paarivendhar. Now it is functioning in campuses located at Kattankulathur, Ramapuram Part (Vadapalani) and Ramapuram in Chennai and one in Modi Nagar, Ghaziabad with over 52000 students and 3200 faculty members, offering wide range of undergraduate, postgraduate and doctoral programs in Engineering, Management, Medicine & Health Sciences, Agriculture, Law and Science & Humanities. The Institution has moved up through international alliances and collaborative initiatives to achieve global excellence. SRMIST also collaborates with various foreign Universities. Now the Institute enjoys an unsurpassed reputation in academic and corporate circles being the preferred manpower source for vision to be recognized as a world - class learning institution. SRMIST has been accorded Category I status by MHRD-UGC of Government of India and also accredited by NAAC with 'A++' Grade in the year 2018.
ABOUT DEPARTMENT OF MECHANICAL ENGINEERING, SRM IST
The Department of Mechanical Engineering is one of the pioneering departments of SRMIST. The department is functionally divided into three broad areas of specialization: (i) Design (ii) Manufacturing and (iii) Thermal. B.Tech Mechanical Engineering program at Kattankulathur campus is accredited by Engineering Accreditation Commission (EAC) of ABET, USA, (www.abet.org). The department also offers M.Tech. and Doctoral programs in various specializations. The present faculty strength is 124. About 800 + research papers and 850 + conference papers have been published in national and international levels. More than 30 patents have been filed in national and international levels. The following salient workshops and conferences was conducted by the Department of Mechanical Engineering, KTR: International Conference on Advances in Mechanical Engineering in the year 2006, Short Course on Mechanics of Composite Materials and Structures: workshop on Development, Manufacturing and Analysis of Advanced Composites and short course on FEM in the year 2015, National Conference on Advances in Mechanical Engineering (NCAME 2016), Brain Wave Robotics, in the year 2017, Second International Conference on Advances in Mechanical Engineering (ICAME 2018) and Third international Conference on Advances in Mechanical Engineering ICAME 2020.
ABOUT THE CONFERENCE
Manufacturing industry is the backbone of any modern economy and manufacturing engineering is associated with providing the processes and systems to meet the demands of this sector. With the globalization of the world economy is emerging as one of the key manufacturing hubs and there is considerable demand from industry for manufacturing engineers capable of meeting the challenging requirements. The role of manufacturing in the country’s economy and societal development has long been established through their wealth creation activities. To broaden our knowledge in manufacturing and to increase innovation and responsiveness to ever increasing international needs, more in depth studies are critically needed at this juncture of global competitive scenario.
CALL FOR PAPERS
The aim of ICRAMER 2021 is to bring together specialists and practitioners from industry. R&D institutes and academicians and to provide the forum for exchange of ideas. It also provides a premier interdisciplinary platform for researchers, practitioners, and educators to present and discuss the most recent innovations, trends, and concerns as well as practical challenges encountered and solutions adopted in the fields of recent advances in manufacturing engineering research and applications.
TOPICS
Advance Optimization and charterization techniques Advances in Additive Manufacturing Advances in Machine Tool Design Advances in Materials Technology Advances in Metal Cutting TechnologyAdvances in Metal JoiningAdvances in Metal FormingArtificial Intelligence and RoboticsAutomation and Smart Systems Bio MaterialsCAD/CAM/CAE/Reverse EngineeringCellular manufacturingCharacterization and TestingCoatings and Surface EngineeringComposite and Polymer Processing Composite materialsComputer aided inspectionCryogenic aspects of metal cuttingEnergy Beam Processing Green and Sustainable Manufacturing Hybrid Manufacturing Processes and Technology Industry 4.0Laser based manufacturingMachine visionManufacturing process planning and schedulingMaterials behaviorMechanical dynamics and vibrationMechanical strengthMEMS/NEMSMetrology and Quality Micro and Nano Manufacturing
REGISTRATION
Category National International
Student Authors & Full Time Research Scholars Faculty INR 500 USD 10 Industry INR 1000 USD 20
* E - Certificate for all authorsBANK DETAILS
Account Name : Mechanical Engineering AssociationAccount No. : 459777734Name of the Bank : Indian BankIFSC Code : IDIB000S181MICR No. : 600019171
FOR REGISTRATION
Submit Abstract: : [email protected] : https://www.srmist.edu.in/icramer-2021/
REGISTRATION LINK:
https://forms.gle/pLh53s3LMPhWaJ8i7
CHIEF PATRONS
Dr. T. R. Paarivendhar, Chancellor SRMISTShri. Ravi Pachamoothoo, Pro - Chancellor (Administration), SRMISTDr. P. Sathyanarayanan, Pro - Chancellor (Academics), SRMISTDr. R. Shivakumar, Vice President, SRMISTDr. Sandeep Sancheti, Vice Chancellor, SRMIST
CHAIRPERSON OF ORGANIZING COMMITTEE
Dr. C. Muthamizhchelvan, Pro-Vice Chancellor (Engineering & Technology), SRM IST
CO-CHAIRPERSONS OF ORGANIZING COMMITTEE
Dr. T. V. Gopal, Dean, College of Engineering and Technology, SRM ISTDr. D Kingsly Jeba Singh, Chairperson, School of Mechanical Engineering, SRM IST
CONVENER
Dr. M. Cheralathan, Professor and Head, Department of Mechanical Engineering
CO-CONVENER
Dr. U. Mohammed IqbalAssociate Professor and Manufacturing Division HeadDepartment of Mechanical Engineering
ORGANIZING SECRETARIES
Dr. M. R. Stalin John, Associate ProfessorDr. A. Razal Rose, Associate ProfessorDr. I. Infanta Mary Priya, Assistant ProfessorDr. N. Harshavardhana, Assistant ProfessorMr. J. Santhakumar, Assistant Professor
Department of Mechanical EngineeringSRM Institute of Science & TechnologyKattankulathur -603203. Chengalpattu (DT), Tamil Nadu, India.https://www.srmist.edu.in/icramer-2021/
TECHNICAL COMMITTEE MEMBERS
Dr. Shubhabrata Datta, Research ProfessorDr. S. Prabhu, ProfessorDr. T. Rajasekaran, ProfessorDr. A. Razal Rose, Associate ProfessorDr. U. Mohammed Iqbal, Associate ProfessorDr. M. R. Stalin John, Associate ProfessorDr. M. Prakash, Associate ProfessorDr. S. Murali, Associate ProfessorDr. A. Arul Jeya Kumar, Associate ProfessorDr. Sumit Pramanik, Research Associate ProfessorDr. A. Vijaya, Assistant ProfessorDr. I. Infanta Mary Priya, Assistant ProfessorDr. T. Geethapriyan, Assistant ProfessorDr. T. Deepan Bharathi Kannan, Assistant ProfessorDr. S. Madhavan, Assistant ProfessorDr. N. Harshavardhana, Assistant Professor
NATIONAL ADVISORY COMMITTEE
Dr. N. Arunachalam, IIT MadrasDr. I. A. Palani, IIT Indore Dr. K. Raghukandan, Annamalai University
Dr. A. Velayutham, Scientist-F, CVRDE, Chennai Dr. T. Senthil Velan, Pondicherry Engineering College Dr. A. Siddharthan, MIT Campus, Anna UniversityDr. A. Arockiarajan, IIT MadrasDr. D. Lenin Singaravelu, NIT, TiruchirappalliDr. S. Jerome, NIT, TiruchirappalliDr. A. K. Lakshminarayanan, SSN Engineering CollegeDr. S. Gunti, DGM-Mahindra & Mahindra, Chennai Dr. G. Rajaram, Manager - R&D, National Engg. Industries Ltd.Dr. V. S. Senthil Kumar, Anna University Mr. G. S. Shankar, Caterpillar IndiaDr. S. Aravindan, IIT DelhiDr. P. Hariharan, Anna UniversityDr. M. Kanthababu, Anna UniversityDr. L. Vijayaragavan, IIT Madras Dr. Vijay kumar Pal, IIT JammuDr. Manidipto Mukherjee, CSIR-CMERI, DurgapurDr. V. Muthupandi, NIT TiruchirappalliCapt. Dr. A. Suresh Babu, Anna UniversityDr. S. Balasivanandha Prabu, Anna University
INTERNATIONAL ADVISORY COMMITTEE
Dr. Jaharah A. Ghani, University Kebangsaan, MalaysiaDr. Kyung-Sun Lee, Catholic University of Pusan, KoreaDr. Debes Bhattacharyya, University of Auckland, New Zealand Dr. J. N. Reddy, Texas A&M University, USA Dr. J. Paulo Davim, University of Aveiro, Portugal Dr. S. Viswanath, National Institute of Sports, Malaysia Dr. Mohan Ranganathan, University of Tours, FranceDr. Se Jin Park, KRISS, South Korea Dr. M. S. J. Hashmi, Dublin City University, IrelandDr. Nik Rosli Abdullah, Universiti Teknologi MARA, MalaysiaDr. Viorel Paleu, Technical University, RomaniaDr. Ali Sabea Hammood, University of Kufa, IraqDr. Manoj Gupta, National university of Singapore, SingaporeDr. S. Vincent, BITS Pilani, Dubai Dr. Abdolvahed Kami, Semnan University, IranDr. Seung Nam Min, Shinsung University, South KoreaDr. Pierre-Henri Cornuault, Institut FEMTO-ST, Besançon, FranceDr. Zahrul Fuadi, Syiah Kuala University, IndonesiaDr. Hamid Reza Ghazvinloo, University of Semnan, IranDr. Saoussan El Mouhri, Laboratory of Materials, Metallurgy and Process Engineering, Morocco
PLENARY/KEYNOTE SPEAKERS
Dr. Jaharah A. Ghani, University Kebangsaan, MalaysiaDr. Nik Rosli Abdullah, Universiti Teknologi MARA, MalaysiaDr. Viorel Paleu, Technical University, RomaniaDr. Prashanth Konda Gokuldoss, Tallinn University of Technology, EstoniaDr. S. Viswanath, National Institute of Sports, MalaysiaDr. G. L. Samuel, IIT MadrasDr. R. Karthic Narayanan, IIITDM KancheepuramDr. R. Thyagarajan, NFTDC, HyderabadDr. Manidipto Mukherjee, CSIR-CMERI, DurgapurDr. Sagar Telrandhe, M/s. MRF R&D India Limited, ChennaiMr. Praveen Sankar, M/s Fronius India Private Limited, ChennaiDr. Munish Jindal, Hover Robotix. Delhi
SPONSORSHIPSpornship of ICRAMER 2021 conference is invited and the details are available in conference website (https://www.srmist.edu.in/icramer-2021/). An Abstract proceeding book will include all accepted technical papers and details of sponsors. The souvenir will include advertisements also for which tariff details are given in website.
ADDRESS FOR CORRESPONDENCE
Dr. M. Cheralathan, Convener - ICRAMER 2021, Professor and HeadDepartment of Mechanical EngineeringSRM Institute of Science and TechnologyKattankulathur Campus, Chengalpattu (DT), Chennai 603203, Tamil Nadu, India.Phone No: 044-27417823Email: [email protected]
CONTACT US
Dr. U. Mohammed Iqbal, Associate ProfessorMobile: +91 9600429006Dr. M. R. Stalin John, Associate ProfessorMobile: +91 9841105512Dr. I. Infanta Mary Priya, Assistant ProfessorMobile: +91 9841690443
Modeling, analysis, and simulation of manufacturing processesNano TechnologyNon Destructive TestingNon-Conventional Machining ProcessesPlastic processing technologyPowder metallurgy and ceramic formingPrecision Engineering Thermal aspects of metal cuttingTribology
IMPORTANT DATES
Submission of Abstract: 30th March 2021Acceptance Notification: 30th March 2021Submission of full paper: 30th March 2021Dead line for Registration: 31st March 2021Conference Date: 15-16 April 2021Please submit your abstracts (max. 150 words) by email to [email protected]. The abstract should contain the title of the paper, author’s name and affiliations, email address, contact person and keywords. The length of the abstract should not be more than 150 words and should be typed in Times New Roman with 12 font size.
PUBLICATIONSAll submitted papers will be subjected to peer review as per the journal norms (including similarity and plagiarism check less than 10%). Finally, all the accepted papers will be published in any one of the following listed Journals based on authors interest.
1. Journal of Engineering Research (Subjected to final peer review by journal policy)ISSN: 2307-1885Indexed: Scopus and Science Citation Index-Expanded (SCIE) IF: 0.3872. AIP Conference ProceedingsIndexed: Scopus ISSN: 0094-243XSNIP: 0.3143. International Journal of Vehicle Structures & Systems (ISSN No. 0975-3060 (Print), 0975-3540 (Online) Indexed: Scopus SNIP: 0.461The word/ Latex template for preparing the paper is available at ICRAMER 2021 website: https://www.srmist.edu.in/icramer-2021/ (* Upon acceptance of the articles, the publication charge of Rs. 7500/- per article will be collected for national participants and USD 100 for International Participants)