LC200, ACCURATE DETECTION WITH RELIABLE & SECURE COMMUNICATION !The VIMOC Landscape-Computing wireless vehicle parking detection and management system uses embedded, in-ground sensors to detect the occupancy of vehicles parked over them. The system provides an accurate, lower-cost, and easier to install alternative to other occupancy detection systems; many of which are overhead mounted, not suitable for outdoor or surface only applications, that need costly cable ducting. Occupancy data and analysis is presented via a web-based interface or accessed via an open API, allowing simple integration with management information systems.

KEY BENEFITS

• Simple, low cost installation

• No slotting, trenching or ducting

required

• Readily scalable and upgradeable

solution

• Delivers real-time parking space

information to drivers (signs, apps,

navigation systems)

• Easy to integrate with other control

systems

• Increased accuracy and reliability

compared to other occupancy

detection systems

• Suitable for on-street, off street and

multi level parking installations

• Surface or flush mounted options

• Rich API allowing correlation with

different sensory data for real time

intelligence, data mining, !!!!!For more information on any of

our products or services please

contact us at:

IoT@vimoctechnologies.com

Unlike many occupancy systems that rely on overhead mounting, the LC200 sensors wirelessly transmit their detection data in real time, via secure low power radio technology, to a nearby LC201 Sensory Router which feeds the information to the Landscape-Computing mesh network infrastructure, providing intelligence and data mining at the edge of the network. The Landscape-Computing infrastructure eliminates single point of failure and provides secure and correlated data and intelligence to any application via our API.

PARKING DETECTION & MANAGEMENT SYSTEM

COST EFFECTIVE OCCUPANCY DETECTION FOR A WIDE RANGE OF APPLICATIONS !Featuring Landscape-Computing technology, the VIMOC LC200 Occupancy Detector has been designed to accurately and reliably detect the presence of a vehicle in a defined zone including over prolonged occupancy. The LC200 is suitable for a wide range of applications, such as: car parking space occupancy, dynamic parking payment schemes, and monitoring of ‘No Parking’ zones. Output from the system can be linked to management information and control systems and/or variable message signs. The open API can be accessed directly by any vehicle GPS navigation system, providing guidance to closest parking space. VIMOC provides its API to different mobile and web registered application developers for iOS and Android, enabling real-time parking status feeds to enhance the capability of any existing application.

!• Non-invasive and robust design • 99%+ accuracy in occupancy detection • Web based real-time and data mining platform • Battery powered via replaceable 3+ years

battery life batteries • Wide operating temperature range (-40°C to

+85°C) • P68 weather resistant detectors • Self-configuring, self-healing wireless mesh

network

SMART CITY INFRASTRUCTURE

A WIRELESS SECURED INFRASTRUCTURE KEY FEATURES

HIGH ACCURACY DETECTION !With greater than 99% accuracy in occupancy detection, it yields excellent reliability, coupled to advanced low power bi-directional communications between the detector and other components in the system, enabling remote monitoring of the system and battery levels. The LC200 Occupancy System utilizes advanced fusion sensory technology with embedded optical and magnetic sensors, reducing errors due to magnetic interference and providing a high level of accuracy and reliability. Landscape-Computing infrastructure provides intelligence at the edge of the network and enhances the integrity of the system by using advanced signal processing and machine learning algorithms.

LC200 SURFACE MOUNTED WIRELESS SENSOR !The LC200 Surface Mounted Wireless Occupancy Sensor is a robust detection system combining a sensitive magnetometer and a smart optical sensor equipped with a low power secure radio transmitter and a micro-controller.

!The detection combines 3 variables, (1)magnetic, (2)optical, and (3)RF attenuation making the device a robust and reliable, highly accurate detection system. The sensor is packaged in a small hardened plastic IP68 rated enclosure for quick and easy installation in the parking space. !The low power transmission technology combined with its integral high quality battery, ensures an average operational life of 3 years (7 year battery life option available).

LC200 FEATURES: !• Quick and easy installation of the

compact sensor in a parking space via screws !

• Suitable for installation at both on- street and off-street parking areas including multi-level lots and garages !

• 2-way wireless communications enabling re-configuration and software firmware updating !

• A self-configuring, multi-hop and self healing mesh networking protocol, ensuring reliable detection data transfer !

• Security: AES-128 !• Higher detection accuracy by using

fusion sensing technology overcoming limitation of single magnetic sensing methods !!!!!

Technologie

s

LANDSCAPE COMPUTING ACCESS POINT (nBOX), LC203 !The LC203 Access Point is the computing node of the Landscape-Computing mesh network. Each node maintains 2-way communications with up to 160 LC200 sensors via LC201 Router Units. !The Access Point is housed in a small powered cabinet with an externally mounted antenna for the wireless network. It provides the gateway and local data collection point for the LC200 occupancy system and the interface to third party parking management systems via an Ethernet and/or 3G/4G TCP based REST Application Programming Interface (API). With these management systems parking bay occupancy and optimization can be monitored and managed via variable message signs or mobile application devices to direct drivers to available spaces. !The Landscape-Computing platform connects different LC203 Access Point in a mesh configuration to form a computing grid, providing a high-level of intelligence within the edge of the network and a rich API allowing IoT and Smart City service providers to build advanced and scalable applications, while reducing software complexity and eliminating a single point of failure. !The nBox Computing Node can connect with different type of sensors allowing a high level of data correlation.

AN API OF EVERYTHING TO EVERYONE !VIMOC provides an Application Programming Interface (API) that can be used to extend the scope of the platform even further. This way it enables companies to adapt existing services and create new ones to expand their business model into a new universe of Smart City experiences. !The Landscape-Computing infrastructure provides Smart City Service Providers a robust and scalable computing platform to deliver a new generation of applications, and provides city officials, business operators and the public not only intelligence related to parking, but the computing resources to correlate the parking sensory data with a wide variety of additional sensors. This is provided through a dynamic, scalable API that facilitates access to a wide range of sensory data, in-built statistical analysis, and a framework for leveraging the intelligent processing capabilities offered by the VIMOC computing nodes.

GENERAL SPECIFICATION

LC200 SURFACE MOUNTED WIRELESS SENSOR !Detection: 3-Axis magnetic field sensing, Optical sensing, RF attenuation analysis !Frequency band: -IEEE 802.15.4- 2.4GHz band -IEEE 802.15.4- 868MHz ISM band (EU certified license free) !Battery life: 3 years (Rechargeable option) Dimensions: Diameter 143mm/Height 36mm Ingress protection rating: IP68 Load resistance: 20 tons static Reaction/trigger time: 10ms (device) 10s (to refresh database) Operating Temperature: -40ºC ~ 85ºC (-40ºF ~ 185ºF) Security: AES-128 !Communication range (optimal): To a LC201 router unit: 100m-150m To a LC203 computing node: 200m-300m

LC201 SENSORY WIRELESS MESH COMMUNICATION ROUTER ! Frequency band: -IEEE 802.15.4- 2.4GHz band -IEEE 802.15.4- 868MHz ISM band (EU certified license free) ! Power supply: AC100-240V 1A/DC5V Protection: IP66 Operating temperature: -40ºC ~ 85ºC (-40ºF ~ 185ºF) Mesh capacity: 20 sensory nodes per router Security AES-128 !! Communication range (optimal): To a LC200 sensor: 100m-150m To a LC203 computing node: 100m-150m

LC203 nBox: WIRELESS LANDSCAPE-COMPUTING NODE !Operation: Mesh network communication, REST web service interface, Sensor data acquisition & filtering, nBox management interface, Sensory data & Intelligence repository, Information processing & analysis !Operating System: Linux !SoC: CPU: ARM Cortex-A7 @ 1 GHz dual-core GPU: Mali-400 MP2 2 GiB DDR3 @ 480 MHz !Storage: 8 GB NAND flash built-in, 1x microSD slot, 1x SATA 2.0 port (Hard Disk 2,5") !Connectivity: 10/100/1000 RTL8211E Gigabit Ethernet, Wi-Fi, BT, Xbee !nCell accelerator(optional): FPGA nCell multicore processor board