VIMAL K. PATELsvnit.ac.in/facup/VKP_Web_Site_CV.pdf · 2007 274 4409 ME 346320 . Area of research...
Transcript of VIMAL K. PATELsvnit.ac.in/facup/VKP_Web_Site_CV.pdf · 2007 274 4409 ME 346320 . Area of research...
VIMAL K. PATEL Assistant Professor,
Mechanical Engineering Department, SVNIT, Surat
Address for correspondence
Advanced Fluid Mechanics and Fluid Power Laboratory, Mechanical Engineering Department, Sardar Vallabhbhai National Institute of Technology, Surat, Dumas Road, Ichchhanath, Surat – 395007, Gujarat, INDIA
Phone No.
(O) 026122041139 (M) 9099573650
(P) [email protected] (O) [email protected]
Social media
Facebook: vimal.svnit WhatsApp: 9099573650
Nationality
Indian
Educational Qualifications
Completed Doctor of philosophy (Department of Mechanical Engineering) from Indian Institute of Technology, Bombay, Mumbai.
Completed Master of Technology (Specialization: Mechanical Engineering) from Sardar Vallabhbhai National Institute of Technology, Surat with CGPA 9.42. Honored by gold medal for first rank in M.Tech. [Mechanical Engineering].
Completed Bachelor of Engineering (Mechanical Engineering Branch) from Birla Viswakarma Mahavidyalaya, Vallabh Vidyanagar affiliated with Sardar Patel University V. V. Nagar with CPI 7.96.
Completed Diploma in Mechanical Engineering from Bhailalbhai and Bhikhabhai Polytechnic, Vallabh Vidyanagar affiliated with Technical Examinations Board, Gujarat state, Gandhinagar, with 77.21 %. Third merit in all over Gujarat state for DME to BE admission.
Graduate Aptitude Test in Engineering [GATE]:
Year GATE Score
All India Rank
Registration No
2011 450 4505 ME 2201250
2010 482 2691 ME 3118381
2007 274 4409 ME 346320
Area of research
Machine design and machine dynamics
Fluid mechanics and fluid machines
Refrigeration and air conditioning
Metal forming techniques – Tailor welded blanks
Subjects deliberated at SVNIT, Surat
B. Tech. – I (All) Engineering Drawing
B. Tech. – I (All) Basic Mechanical Systems
B. Tech. – I (All) Workshop practice
B. Tech. – II (ME) Theory of Machines
B. Tech. – II (CH) Theory of Machines and Machine design
B. Tech. – II (EE) Applied Thermodynamics and Thermal Engineering
B. Tech. – II (CE) Hydraulics and Hydraulic Machines
B. Tech. – III (ME) Fluid Machines
B. Tech. – III (ME) Refrigeration and Air conditioning systems
B. Tech. – III (ME) Dynamics of Machines
B. Tech. – IV (ME) Design of Alternative source of energies
M. Tech. – I (TM) Gas turbine and jet propulsion
M. Tech. – I (TM) Thermal Turbo Machines
Honored by teaching excellence award
[1] Sponsored research and development projects and Patent
i. Research projects: 1 (Completed) of amount Rs. 9.97 Lacs
ii. Patent: 1 (Complete specification filled)
Details are given in Annexure - I
[2] Consultancy projects
Completed Assignments: 5 of total consultancy amount Rs. 25,14,922/-
Details are given in Annexure - II
[3] Ph. D. guided
0 Completed + 3 Ongoing Details are given in Annexure - III
[4] Journal papers
6 Published + 1 under review Details are given in Annexure - IV
[5] Conference papers
i. International conference papers: 16 presented / published in proceedings
ii. National conference papers: 7 presented / published in proceedings
Details are given in Annexure - V
[6] Administrative activities
i. Controlled as Head of the Department (HOD), GTU coordinator, controller of examination at BMCTE, Surat
ii. Worked as Zonal officer and presiding officer in lok-sabha and Legislative Assembly elections
iii. Serving as chairman, IMMC, Estate section – II at SVNIT, Surat
Details are given in Annexure - VI
[7] Institute level activities
Contributed as faculty in charge of student council and examination result verification and registration committee member of the institute convocation.
Details are given in Annexure - VII
[8] Faculty in-charge
i. Worked as faculty advisor of B. Tech. – IV ii. Working as faculty advisor of B. Tech. - II
Details are given in Annexure - VIII
[9] Department level activities
i. Keenly contributing as member of time table committee ii. Actively working as laboratory in-charge of AFMFP lab and
Dynamics laboratory iii. Contributed as examination committee member for UG, PG
subjective examination and PG dissertation and seminar examination
Details are given in Annexure - IX
[10] Short term training program organized
Total 12 short term training programs of minimum 5 working days are organized as coordinator at SVNIT, Surat
Details are given in Annexure - X
[11] M. Tech. dissertation guided
37 Completed + 5 Ongoing Details are given in Annexure - XI
[12] B. Tech. project guided
29 Batches completed + 3 Ongoing Details are given in Annexure - XII
Annexure – I
[1] Sponsored research and development projects and
Patent
[1] Research and development project (Completed)
Title of the project: Hydrodynamic performance investigations of the hydrokinetic
turbine on Savonius concept.
Investigators: (1) Vimal K. Patel, SVNIT, Surat.
Amount: Rs. 9.97 Lacs
[2] Patent (Complete specification filled)
Title of the Project: Hydrokinetic turbine
Application No. 201721012782
Date of filing complete specifications: 10th April, 2018
Annexure – II
Consultancy projects
[1] Dindoli Plant, SMC (Completed)
Name of the assignment: Third party inspection for design, construction, testing and
commissioning of 120 MLD capacity water treatment plant.
Work consigned by: Surat Municipal Corporation, Dindoli plant
Amount: Rs. 15,80,615/-
[2] Karanj pumping station, SMC (Completed)
Name of the assignment: Third party inspection for the work of electro mechanical
equipment.
Work consigned by: Surat Municipal Corporation, Karanj sewage pumping station.
Amount: Rs. 2,16,438/-
[3] Puna Simada and Magob Sarthana pumping station, SMC (Completed)
Name of the assignment: Third party inspection for the work of electro mechanical
equipment.
Work consigned by: Surat Municipal Corporation, Puna Simada and Magob Sarthana
sewage pumping station.
Amount: Rs. 3,22,870/-
[4] Evaluation of Air conditioning systems, SMC (Completed)
Name of the assignment: Consultancy service for evaluation of Sardar Smriti bhavan
Air conditioning system.
Work consigned by: Surat Municipal Corporation, Sardar smriti bhavan, Varachha
road.
Amount: Rs. 3,45,000/-
[5] Repairing of gate of weir and TPI service, SMC (Completed)
Name of the assignment: Scrutinization of estimate of repairing of gate of weir and TPI
services.
Work consigned by: Surat Municipal Corporation, Surat
Amount: Rs. 50,000/-
Annexure – III
[3] Ph. D. guided
[1] Mr. Ravi S. Patel, SVNIT (Ongoing)
Research area: Fluid machines
Development and demonstration of hydrokinetic turbine for open
channel application. (Darrieus and Savonius turbine)
Registration: July, 2018 as FIR
Research Implements: Experiments, Numerical simulation, Theoretical investigations
[2] Mr. Hemal Lakdawala, SVNIT (Ongoing)
Research area: Fluid machines and machine design
Improvements on Pelton Wheel Turbine Runner and Water Wheel
Registration: December, 2018 as PEC
Research Implements: Experiments, Numerical simulation, Theoretical investigations
[3] Mr. Nitin Bagre, SVNIT (Ongoing)
Research area: Refrigeration and air conditioning
Improvements on vortex tube refrigeration
Registration: December, 2018 as FIR
Research Implements: Experiments and Numerical simulation
Annexure – IV
[4] Journal papers
Patel, V., Eldho, T.I. and Prabhu, S.V., 2019. Performance enhancement of a Darrieus
hydrokinetic turbine with the blocking of a specific flow region for optimum use of
hydropower. Renewable Energy, Available online 20 December 2018.
https://www.sciencedirect.com/science/article/pii/S0960148118315210
Patel, V., Eldho, T.I. and Prabhu, S.V., 2019. Velocity and performance correction
methodology for hydrokinetic turbines experimented with different geometry of the
channel. Renewable Energy, 131, pp.1300-1317.
https://www.sciencedirect.com/science/article/pii/S0960148118309777
Patel, V., Eldho, T.I. and Prabhu, S.V., 2018. Theoretical study on the prediction of the
hydrodynamic performance of a Savonius turbine based on stagnation pressure and
impulse momentum principle. Energy Conversion and Management, 168, pp.545-563.
https://www.sciencedirect.com/science/article/pii/S019689041830414X
Patel, V., Eldho, T.I. and Prabhu, S.V., 2017. Experimental investigations on Darrieus
straight blade turbine for tidal current application and parametric optimization for hydro
farm arrangement. International journal of marine energy, 17, pp.110-135.
https://www.sciencedirect.com/science/article/pii/S2214166917300085
Patel, V., Bhat, G., Eldho, T.I. and Prabhu, S.V., 2017. Influence of overlap ratio and
aspect ratio on the performance of Savonius hydrokinetic turbine. International Journal
of Energy Research, 41(6), pp.829-844.
https://onlinelibrary.wiley.com/doi/pdf/10.1002/er.3670#accessDenialLayout
Patel, V., and Chaudhari, M.H., 2013. Performance Prediction of H-Type Darrieus
Turbine by Single Stream Tube Model for Hydro Dynamic Application. Int. J. Eng. Res.
Technol, 2.
https://www.ijert.org/phocadownload/V2I3/IJERTV2IS3540.pdf
Annexure – V [i]
[5] International conference papers
1 Patel Vimal, Gamit Aditya, Gamit Parimal, 2018, Effect of the Duct Shape on the
Performance of the Axial Flow Hydro Kinetic Turbine, In Proceedings of the 7th
International and 45th National Conference on Fluid Mechanics and Fluid Power (FMFP).
December 10-12, 2018, IIT Bombay, Mumbai, India. Paper No. 710
2 Patel Vimal, Gamit Aditya, Chaudhary Hardik, 2018, Effect of the Blade Shape on the
Performance of an Axial Flow Hydro Kinetic Turbine, In Proceedings of the 7th
International and 45th National Conference on Fluid Mechanics and Fluid Power (FMFP).
December 10-12, 2018, IIT Bombay, Mumbai, India. Paper No. 706
3 Patel Vimal, Gamit Aditya, Vasava Rahul, 2018, Effect of the Blade Angle on the
Performance of Axial Flow Hydro Kinetic Turbine, In Proceedings of the 7th
International and 45th National Conference on Fluid Mechanics and Fluid Power (FMFP).
December 10-12, 2018, IIT Bombay, Mumbai, India. Paper No. 701
4 Patel Kushal, Patel Vimal, 2017, Effect of The Edge Shape of Vane on the Performance
of the Savonius Hydrokinetic Turbine, In Proceedings of the 24th National and 2nd
International ISHMT-ASTFE Heat and Mass Transfer Conference (IHMTC-2017),
December 27-30, 2017, BITS-Pilani, Hyderabad, India, Paper No. IHMTC2017-07-1206.
5 Mehta Viraj, Patel Vimal, 2017, Performance Evaluation of Jigsaw Machine with
Kinematic and Stress Analysis, In Proceedings of ICTACEM 2017 International
Conference on Theoretical, Applied, Computational and Experimental Mechanics December
28-30, 2017, IIT Kharagpur, India Paper No. ICTACEM-2017/0655
6 Patel Vimal, Eldho T. I., Prabhu S. V. 2016, Experimental Investigations on Darrieus
Turbine in an Open Channel. In Proceedings of the 6th International and 43rd National
Conference on Fluid Mechanics and Fluid Power. December 15-17, 2016, MNNITA,
Allahabad, U.P., India, Paper No. 301
7 Patel Vimal, Patel Ravi, Patel Kushal, 2016, Effect of Central Shaft on the Performance
of Savonius Hydrokinetic Turbine. In Proceedings of the 6th International and 43rd
National Conference on Fluid Mechanics and Fluid Power. December 15-17, 2016,
MNNITA, Allahabad, U.P., India, Paper No. 278
8 Patel Vimal, Patel Rinkesh, 2016, Effect of Deflector Plate on the Performance of
Darrieus Hydrokinetic Turbine. In Proceedings of the 6th International and 43rd National
Conference on Fluid Mechanics and Fluid Power. December 15-17, 2016, MNNITA,
Allahabad, U.P., India, Paper No. 580
9 Patel Abhilash, Chauhan Mehul, Patel Vimal, 2016, Performance Enhancement of
Power Turbine Using Designed Ducts. In Proceedings of the 6th International and 43rd
National Conference on Fluid Mechanics and Fluid Power. December 15-17, 2016,
MNNITA, Allahabad, U.P., India, Paper No. 473
10 Patel, V., Savalia, D., Panchal, M. and Rathod, N., 2016. Experimental Investigations
of Hydrokinetic Axial Flow Turbine. In Proceedings of the World Congress on
Engineering (Vol. 2).
11 Patel, H.D.P.V., 2010. Computer aided kinematic and dynamic analysis of cam and
follower. In Proceedings of the World Congress on Engineering (Vol. 2).
12 Vimal Patel, H.K.Raval, 2008, An Analytical Model to Predict Elongation of Tailor
Welded Blanks. In proceedings of World Congress on Engineering and Computer Science
(WCECS 2008), Sanfransisco, USA, 22-24 October, 2008.
13 Vimal Patel, H.K.Raval, 2008, Investigation of state of strain under uniaxial test of
Tailor Welded Blanks, In proceedings of International conference FAME 2008, Sivakasi,
Tamilnadu, India, December 11-13, 2008.
14 A.D.Parekh, B.M.Sutaria, R.D.Shah, Vimal Patel, 2006, Analysis of Heat Transfer in
Fins Under Steady State, In proceedings of National Conference on Advances in Mechanical
Engineering, Kota, India, March, 18-19, 2006.
15 Ashok Parekh, Jyotirmay Banerjee, MahendraMaisuria, Vimal Patel, 2006, Energy and
Exergy Analysis of Combined Cycle power Plant, IMECE2006-14346, In proceeding of
ASME International Mechanical Engineering Congress and Exposition, Chicago, lllinois,
USA, November 5-10, 2006.
16 Ashok Parekh, Jyotirmay Banerjee, Mahendra Maisuria, Vimal Patel, 2006, Heat
Transfer Augmentation Using Fins of Various Cross Section Under Steady State,
IMECE2006-14361, In proceedings of ASME International Mechanical Engineering
Congress and Exposition, Chicago, lllinois, USA , November 5-10, 2006.
Annexure – V [ii]
[5] National conference papers
1 Patel Vimal, Eldho T. I., Prabhu S. V., 2017, Effect of the Span Wise Location in the
Rectangular Section Open Channel on the Performance of Savonius Hydrokinetic
Turbine, In Proceedings of the 44th National Conference on Fluid Mechanics and Fluid
Power December 14-16, 2017, Amrita University, Amritapuri Campus, Kollam,
Kerala, India, Paper No. 203
2 Patel Vimal, Patel Kushal, Gamit Aditya, 2017, Effect of Deflector Plate on the
Performance of the Modified Savonius Hydrokinetic, In Proceedings of the 44th
National Conference on Fluid Mechanics and Fluid Power December 14-16, 2017, Amrita
University, Amritapuri Campus, Kollam, Kerala, India, Paper No. 31
3 Patel Vimal, Eldho T. I., Prabhu S. V., 2017, Effect of Partial Submersion on the
Performance of a Savonius Hydrokinetic Turbine with Close Ended Vanes, In
Proceedings of the 44th National Conference on Fluid Mechanics and Fluid Power
December 14-16, 2017, Amrita University, Amritapuri Campus, Kollam, Kerala,
India, Paper No. 128
4 Batti Mohsinali, Patel Vimal, 2014, Investigation of Blade Twist Factor on
Performance of Gas Turbine, In Proceedings of TFMS 2014 National Conference on
Thermal, Fluid and Manufacturing Science January 24 – 25, 2014 Surat, Gujarat, India
5 Nishith S. Rana , Vimal K. Patel, 2014, Performance Enhancement of Darrieus
Turbine by Use of Cambered Hydrofoil for Hydrodynamic Application, TFMS 1508,
In proceedings of National Conference on Thermal, Fluid and Manufacturing Science.
January 24 – 25, 2014 Surat, Gujarat, India.
6 Vimal Patel, Ashwin Ahir, S.V.Prabhu, T.I.Eltho, 2012, Experimental investigations
on the performance of Darrieus straight blade turbine for hydrodynamic
applications, In proceedings of Thirty Ninth National Conference on Fluid Mechanics and
Fluid Power, SVNIT Surat, Gujarat, India, December 13-15, 2012.
7 Vimal Patel, H.K.Raval, 2008, A review of different metal forming tests for tailor
welded blanks, In proceedings of National Conference on Emerging Trends in Mechanical
Engineering, Vallabh Vidyanagar, India, March, 28-29, 2008.
Annexure – VI
[6] Administrative activities
i. Controlled as department head, GTU coordinator, controller of examination at Bhagvan Mahavir College of Engineering and Technology, Surat from 29th July, 2008 to 27th March, 2009.
ii. Worked as Zonal officer and presiding officer in lok-sabha and Legislative Assembly elections
iii. Serving as chairman, Institute Mechanical Maintenance Committee (IMMC), Estate section – II at SVNIT, Surat. All the activities related to institute, Annual Maintenance Contracts (AMC) of Lift, Air conditioning plant, ACs (Split and Window), Pumps and RO plants and water cooler installation and maintenance is directly controlled during the term.
Annexure – VII
[7] Institute level activities
[1] Institute level Student council
i. Controlled as co chairman of Society of Automotive Engineering (SAE) for more than five years.
[2] Institute level end semester examination scrutiny work
i. Successfully completed scrutiny work assigned for examination taken in November – December 2005, April – May, 2006 at SVNIT, Surat at institute level.
[3] Institute level result verification
i. Successfully controlled institute level result verification committee member from 2009-10 to 2016-17 at SVNIT, Surat
[4] Scrutiny for faculty recruitment
i. Enthusiastically worked as faculty member for scrutiny committee for faculty recruitment during academic year 2017-18.
ii. Successfully completed the work assigned for document verification for ensuring interviews for professor, Associate professor and Assistant professor during academic year 2017-18.
Annexure – VIII
[8] Faculty in-charge
[1] Faculty advisor
i. Assisted the students of B. Tech. – IV as faculty advisor. Also appointed as faculty advisor of B. Tech. – II in Mechanical Engineering Branch which has intake of the student nearly 240 students.
Annexure – IX
[9] Department level activities
[1] Coordinator, work load and timetable
i. Enthusiastically working as work load and time table committee member
[2] Coordinator, Annual Maintenance contract
i. Contributed as coordinator LCD projector AMC during academic year 2012-13.
[3] Coordinator, Elective subject allotment
i. Worked as coordinator of elective subjects for UG and PG level during academic year 2014-15 to 2017-18
[4] Laboratory in-charge
i. Actively contributing towards the development of the Dynamics and Hydraulics and Fluid Mechanics / Advanced Fluid Mechanics and Fluid Power Laboratory as Laboratory in-charge
Annexure – X
[10] Short term training program organized
[1] CNC programming, FANUC, Anchor, SVNIT, April 2011
[2] Root cause bearing damage analysis WE204, Anchor, SVNIT, April 2011
[3] Pump and valve selection for optimum system performance, Anchor, SVNIT, April 2011
[4] Vibration problems in plants and machineries, Anchor, SVNIT, June 2010
[5] Nuclear power engineering, Anchor, SVNIT, July, 2010
[6] Bearing failure and their causes, Anchor, SVNIT, July, 2010
[7] Bearing maintenance technology, Anchor, SVNIT, Aug, 2010
[8] Pump and valve selection for optimum system performance, Anchor, SVNIT, Dec 2010
[9] Section VIII – Division 1: Design and fabrication of pressure vessels, Anchor, SVNIT, Jan 2011
[10] Vibration analysis, level – 1 WI201, Anchor, SVNIT, September 2011
[11] Section VIII – Division 1: Design and fabrication of pressure vessels, Anchor, SVNIT, Nov 2011
[12] Pump selection for optimum system performance, Anchor, SVNIT, Dec 2011
Annexure – XI
[11] M. Tech. dissertation guided
1 Patel Chirag, Patel Vimal, 2018, Investigation of 3D Print Failures and Thermal
Analysis for Advanced Design of Dual Nozzle System of 3D Printer, M. Tech. Thesis,
Sardar Vallabhbhai National Institute of Technology, Surat
2 Patel Aditya, Patel Vimal, 2018, Performance Investigation of Hydrokinetic and Wind
Turbines, M. Tech. Thesis, Sardar Vallabhbhai National Institute of Technology, Surat
3 Patel Jigar, Patel Vimal, 2017, Experimental and Numerical Analysis of Axial Flow
Wind Turbine, M. Tech. Thesis, Sardar Vallabhbhai National Institute of Technology,
Surat
4 Patel Kushal, Patel Vimal, 2017, Numerical and Experimental Investigation for
Savonius Hydrokinetic Turbine, M. Tech. Thesis, Sardar Vallabhbhai National
Institute of Technology, Surat
5 Chaudhary Sashank, Patel Vimal, 2017, Numerical Study of Performance Parameters
of Different Types of Draft Tubes in Hydro Turbines, M. Tech. Thesis, Sardar
Vallabhbhai National Institute of Technology, Surat
6 Patel Ashish, Patel Vimal, 2016, Exact Closed Form Solutions for Two Dimensional
Inclusion Problems using the Complex Variable Method, M. Tech. Thesis, Sardar
Vallabhbhai National Institute of Technology, Surat
7 Rasadiya Jitendra, Patel Vimal, 2016, Experimental Analysis of Axial Flow Turbine, M.
Tech. Thesis, Sardar Vallabhbhai National Institute of Technology, Surat
8 Mitesh Surti, Patel Vimal, 2016, Product Design and Development for Diamond
Separator, M. Tech. Thesis, Sardar Vallabhbhai National Institute of Technology, Surat
9 Patel Ravi, Patel Vimal, 2016, Experimental and CFD Analysis of Savonius
Hydrokinetic Turbine, M. Tech. Thesis, Sardar Vallabhbhai National Institute of
Technology, Surat
10 Patel Rinkesh, Patel Vimal, 2016, Numerical And Experimental Investigation for
Optimum Performance of Darrieus Turbine, M. Tech. Thesis, Sardar Vallabhbhai
National Institute of Technology, Surat
11 Piwal Amol, Patel Vimal, 2015, Performance Prediction of Darrieus Turbine for
Hydrodynamic Application, M. Tech. Thesis, Sardar Vallabhbhai National Institute of
Technology, Surat
12 Bagde Nitin, Patel Vimal, 2015, Performance Prediction of Savonius Turbine for
Hydrodynamic Application, M. Tech. Thesis, Sardar Vallabhbhai National Institute of
Technology, Surat
13 Rana Nishith, Patel Vimal, 2014, Numerical Simulations and Experimental Analysis
for Performance Investigation of Darrieus Turbine For Hydrodynamic Application,
M. Tech. Thesis, Sardar Vallabhbhai National Institute of Technology, Surat
14 Batti Mohsinali , Patel Vimal, 2014, Design of Axial Flow Compressor with Axstream,
M. Tech. Thesis, Sardar Vallabhbhai National Institute of Technology, Surat
15 Jariwala Hitesh , Patel Vimal, 2014, Numerical and Experimental Investigation of
Darrieus Turbine for Hydrodynamic Application, M. Tech. Thesis, Sardar Vallabhbhai
National Institute of Technology, Surat
16 Dabhi Haresh, Thanki S., Patel Vimal, 2014, Experimental and Numerical
Investigation of Tailor Welded Blanks (TWBs), M. E., Thesis, S.V.M.I.T., Bharuch
17 Jariwala Dharmesh, Kumar Nirmal, Patel Vimal, 2014, Theoretical and Experimental
Investigation on the Zero Head Turbine for Optimum Design, M.E., Thesis, S.V.M.I.T.,
Bharuch
18 Tawade Sagar, Patel Vimal, 2013, Automation of FEA of Head to Nozzle and Shell to
Nozzle Joints in Process Equipment, M. Tech. Thesis, Sardar Vallabhbhai National
Institute of Technology, Surat
19 Ram Kamlesh, Vimal Patel, 2013, Vibration Analysis of Rotating Shaft, M. Tech.
Thesis, Sardar Vallabhbhai National Institute of Technology, Surat
20 Kumar Nirmal, Patel Vimal, 2013, Post buckling Analysis of Composite Plate, M.
Tech. Thesis, Sardar Vallabhbhai National Institute of Technology, Surat
21 Gaywala Krunal, Patel Vimal, 2013, Performance Evaluation of a Straight Bladed
Vertical Axis Darrieus Type Water Turbine, M. E. Thesis, Maharaja Sayajirao
University of Baroda, Vadodara.
22 Chaudhari Himanshu, Patel Vimal., 2013, Numerical and Experimental Analysis of
Darrieus Hydro Turbine, M. Tech. Thesis, Sardar Vallabhbhai National Institute of
Technology, Surat
23 Bhusan Patil, Patel Vimal, 2013, Computational Fluid Dynamics Analysis of Darrieus
Type of Turbines, M. Tech. Thesis, Sardar Vallabhbhai National Institute of
Technology, Surat
24 Patel Chetan, Patel Vimal, 2013, Computational and Experimental Analysis of
Savonius Hydro Turbine, SVMIT, Bharuch
25 Sharma Vishal, Patel Vimal, 2012, Vibration and Fatigue Analysis of Spur Gear, M.
Tech. Thesis, Sardar Vallabhbhai National Institute of Technology, Surat
26 Khatri Vijit, Patel Vimal, 2012, Flow Induced Vibration, M. Tech. Thesis, Sardar
Vallabhbhai National Institute of Technology, Surat
27 Fegade Ritesh, Patel Vimal, 2012, Vibration Analysis of Rotor, M. Tech. Thesis, Sardar
Vallabhbhai National Institute of Technology, Surat
28 Chaudhari Mitesh, Patel Vimal, 2012, Numerical Simulation of Shell and Tube Heat
Exchanger with Helical Baffle, M. Tech. Thesis, Sardar Vallabhbhai National Institute
of Technology, Surat
29 Naik Brijesh, Patel Vimal, 2012, Vibration Analysis of Hydro Turbine Test Rig, M.
Tech. Thesis, Sardar Vallabhbhai National Institute of Technology, Surat
30 Mahore Manoj, Patel Vimal, 2012, Fatigue Failure Analysis of Turbine Blades, M.
Tech. Thesis, Sardar Vallabhbhai National Institute of Technology, Surat
31 Solanki Krunal, Patel Vimal, 2011, Structural and Thermal Analysis of Tube sheet, M.
Tech. Thesis, Sardar Vallabhbhai National Institute of Technology, Surat
32 Jacob Boaz Ebenezer, Patel Vimal, 2011, Rotodynamics of a simple rotor bearing
system, M. Tech. Thesis, Sardar Vallabhbhai National Institute of Technology, Surat
33 Shingh Arvind, Patel Vimal, 2011, Modal Analysis of Turbo machines, M. Tech.
Thesis, Sardar Vallabhbhai National Institute of Technology, Surat
34 Patil Aniket, Patel Vimal, 2011, Evaluation of role of skin thickness on the structural
Integrity of a cracked Stiffened Flat Panel, M. Tech. Thesis, Sardar Vallabhbhai
National Institute of Technology, Surat
35 Surwade Pravin, Patel Vimal, 2011, Finite Element Analysis and Shape Design
Optimization of Steam Turbine Rotor, M. Tech. Thesis, Sardar Vallabhbhai National
Institute of Technology, Surat
36 Patel Abhishek, Patel Vimal, 2010, Finite Element analysis of Tailor Welded Blanks,
M. Tech. Thesis, Sardar Vallabhbhai National Institute of Technology, Surat
37 Shelar Suraj, Panwala Md Sohel, Vimal Patel, 2010, Temperature Distribution during
Welding of nub build-up by Finite Element Simulation, M. Tech. Thesis, Sardar
Vallabhbhai National Institute of Technology, Surat and Larsen and Toubro Limited,
Hazira
Annexure – XII
[12] B. Tech. project guided
1 Krunal Ariwala, Preetam Gupta, Harmanpreet Singh, Kishor Kumar Sau ,Nikunj Pareek,
2013, Design & Fabrication of Compressed Air Engine, B. Tech. project report, Sardar
Vallabhbhai National Institute of Technology, Surat
2 Siddharth Nair, Anvita Kilaru, P. Shyam Kiran, Parag Patel, 2013, Design and
Development of a Continuously Variable Transmission, B. Tech. project report, Sardar
Vallabhbhai National Institute of Technology, Surat
3 Jignesh C. Patel, Vivek D. Patel, Vipul V. Vasava, Virendra C. Patadiya, Jignesh K. Patel ,
2013, Experimental Investigation on Darrieus Turbine, B. Tech. project report, Sardar
Vallabhbhai National Institute of Technology, Surat
4 Haren Rajpura, Sandeep Kumar, Nishant Jogadia, Aritra Mukherjee, Prashant Goyal,
2013, Experimental Investigation of Savonious Turbine, B. Tech. project report, Sardar
Vallabhbhai National Institute of Technology, Surat
5 Avinash Kumar, Punit Gandhi, Apoorv Gupta, Anuj Mehan, Pritish Kohli, 2013,
Logarithmic Spiral Turbine, B. Tech. project report, Sardar Vallabhbhai National
Institute of Technology, Surat
6 Chanchrik Mishra, Swapnil Sharma, Kanwar Preet Singh , Siddhant Dash, 2013,
Vibration Analysis of Turbomachines, B. Tech. project report, Sardar Vallabhbhai
National Institute of Technology, Surat
7 Kumar Abhiyoday, Avinash Kumar Kunal , Abhishek Kumar , Anand Dev, Vikash
Kumar, 2014, Design and Development of Hydraulic Centre Stand of Bike, B. Tech.
project report, Sardar Vallabhbhai National Institute of Technology, Surat
8 Neerajkumar Parmar, Maulik Solanki, Kunal Dodiya, Sanket Vankar, 2014, Continuous
Variable Transmission System, B. Tech. project report, Sardar Vallabhbhai National
Institute of Technology, Surat
9 Parth Shah, Vatsal Shah, Poojan Vaghela, Manan Patel, 2014, Hydrodynamic
Performance Investigation of Darrieus Turbine, B. Tech. project report, Sardar
Vallabhbhai National Institute of Technology, Surat
10 Bhavin Rathod, Chetan Rathod, Anand Rutvij, Vijay Mori, Ujas Halpara, Dixit Nayi,
2014, Evaporative Cooling Based Air Conditioning, B. Tech. project report, Sardar
Vallabhbhai National Institute of Technology, Surat
11 Faizan Arif Patel, Siva Saumyan A., Francis Jason Anes, Y. Savishkaran, Rutika Godbole,
2014, Fabrication and Analysis of Spiral turbine, B. Tech. project report, Sardar
Vallabhbhai National Institute of Technology, Surat
12 Druven Doshi, Viraj Kapadia, Kalpesh Bamania, Dhwanit Patel, Abhilash Patel, 2014,
Magnetic Transmission, B. Tech. project report, Sardar Vallabhbhai National Institute of
Technology, Surat
13 Deepak Makwana, Karan Shakya, Mehul Chauhan, Akshay Pargi, 2014, Low head
Impulse turbine, B. Tech. project report, Sardar Vallabhbhai National Institute of
Technology, Surat
14 Dushyant Kumbhat, Vinat Muralidharan, Manishdatta Rajul, Tejash Parmar, Mohit
Dudhat, 2014, Flow velocity and Torque Measurement Devices, B. Tech. project report,
Sardar Vallabhbhai National Institute of Technology, Surat
15 Vudari Tharun, Saurabh Rajput, Deepak Kumar, Jitendra Kumar Jakhar, Samarjeet
Maurya, 2015, Four Wheel Steering System, B. Tech. project report, Sardar Vallabhbhai
National Institute of Technology, Surat
16 Shravan Kumar, Shivam Sundeep, Vikas Meghwal, Vishal Anand, Sujay Kumar, 2015,
Design & Fabrication of Hydraulic Central Stand, B. Tech. project report, Sardar
Vallabhbhai National Institute of Technology, Surat
17 Aman Kothari, Neel Patel, Vijay Chavda, Nigam Desai, Viral Jansari, 2015, Design And
Analysis of Crop Cutter, B. Tech. project report, Sardar Vallabhbhai National Institute of
Technology, Surat
18 Sushant Khatiwoda, Julian Win Adhikari, Elton Lobo, Vishan Amarathunga, Rohan
Gamit, 2015, Design And Experimentation Of Darrieus Turbine For Hydrodynamic
Application, B. Tech. project report, Sardar Vallabhbhai National Institute of
Technology, Surat
19 Kirtan Kumar Patel, Hinal Mistry, Harmeet Singh, Ashutosh Singh, Mahendra Singh
Mahala, 2015, Kinetic Energy Recovery System, B. Tech. project report, Sardar
Vallabhbhai National Institute of Technology, Surat
20 Patel Konark, Gandhi Parth , Vedang Chaudhari, Patel Jay, Shrey Jain, 2015, Design,
Dynamic Analysis and Fabrication of Rice Transplanter, B. Tech. project report, Sardar
Vallabhbhai National Institute of Technology, Surat
21 Manoj Rana, Jigar Patel, Tushar Parmar, Viral Shah, 2015, Solar Photovoltaic Assisted
Electric Vehicle, B. Tech. project report, Sardar Vallabhbhai National Institute of
Technology, Surat
22 Manoj Rana, Jigar Patel, Tushar Parmar, Viral Shah, 2015, Solar Photovoltaic Assisted
Electric Vehicle, B. Tech. project report, Sardar Vallabhbhai National Institute of
Technology, Surat
23 Aalap Shah, Jay Sutariya, Parth Parmar, Nitin Solanki, Maitreyee Thakkar, 2016,
Experimental Investigation Of Vertical Axis Hydrokinetic Turbine, B. Tech. project
report, Sardar Vallabhbhai National Institute of Technology, Surat
24 Rathod Nisarg, Bansal Ravi, Panchal Mohit, Sarvaiya Manan, Savaliya Dixit, 2016,
Design And Fabrication Of Axial Flow Hydrokinetic Turbine, B. Tech. project report,
Sardar Vallabhbhai National Institute of Technology, Surat
25 Kalrav Raj, Rahul Mehra, Shanmukh Sarode, Vismay Parmar, Onkar Jadhav, 2017,
Performance Analysis of Axial flow Hydrokinetic Turbine, B. Tech. project report, Sardar
Vallabhbhai National Institute of Technology, Surat
26 Dhruv Chapani, Anand Makadiya, Jay Vipulkumar Mehta, Shantanu Dalwadi, Chintan
Parmar, 2018, Vertical Axis Hydraulic Turbine, B. Tech. project report, Sardar
Vallabhbhai National Institute of Technology, Surat
27 Pinank Ratanghayra, Kalpit Jain, Paras Barthwal, Priyesh Meena, 2018, Design
Anddevelopment of a Low Cost Upperlimb Exoskeleton Arm, B. Tech. project report,
Sardar Vallabhbhai National Institute of Technology, Surat
28 Aleesha Kalam, Kalinga Somana, Akkaluru Harsha, Munukutla Sasank, Chintala Reddy,
2018, Four Wheel Steering System, B. Tech. project report, Sardar Vallabhbhai National
Institute of Technology, Surat
29 Pratik Tandel, Rahul Tarar, Srujay Gautam, Sourin Das, 2018, Design And Fabricate of
Rice Crop Cutter, B. Tech. project report, Sardar Vallabhbhai National Institute of
Technology, Surat