Prepare By,

MR. Rahul Shivaji Pol ISTE, IET, CLAD, VIIT-NI LabVIEW Academy Incharge, Research Scholar, EC Dept, Sathyabama University Chennai. Assistant Professor, Electronics and Telecommunication Department, Vishwakarma Institute of Information Technology, Sr. No 2/3/4, Kondhwa Budruk, Pune - 411048 Office Wire : +91-020-26932600 Ext-264 Office Fax : +91-020-26932500, Mobile : +91-9657799066, 9970970100

VIIT – NI LabVIEW Academy

Our Vision: Imparting excellent theory and practical knowledge though LabVIEW academy.

:[[[

VIIT-NI LabVIEW Academy is established in 2012 with seven clad

certified trainer aspiring to enhance student’s skill and upgrade their

hands on experience in this domains. Our department staff took lot of

efforts to impart LabVIEW practices in academic curriculum.

LabVIEW Laboratory is fully equipped with latest setup

Intel C2D based desktop computers : 22 No’s.

LabVIEW 2009 licenses software : software

o USB based hardware: CDaq-9174

o NI 9219, NI 9263, NI 9421, NI 9472,

o Speedy 33 DSP Boards,

o Elvis Board,

o Arduino Boards,

o Raspberry Pi Boards etc.

In each semester academy conducts one or two “Forty Hours

Hands on practice in LabVIEW” courses,

Organized STTP course. Academy trained more than 230 students

and 34 staff from different colleges across Maharashtra.

Most of our faculties were invited as a guest lecturer in various

engineering colleges.

Faculties also doing consultancy in different domain for well

known organizations.

VIIT-NI LabVIEW academy doing following activities throughout the year.

I. Encourages students to publish their LabVIEW based research

paper in reputed conferences and publications.

II. Assisting and successfully placed few of the trained students in

various reputed industries. (Whirlpool, Jambhekar Automation,

Bakers Gauges, Propix Technology).

III. Always in touch with the most of the LabVIEW expertise from

different organization to update academy training curriculum.

IV. Invites industry expert to share their experiences and knowledge

with our students.

Different LabVIEW experiments included in academic curriculum:

LabVIEW based Speech synthesis.

Process automation and data acquisition using LabVIEW based

Arduino interface.

Simulating different modulating techniques using LabVIEW.

Simulating various digital circuits using LabVIEW.

To increase student understanding we introduce and

demonstrated few learning examples using LabVIEW in following

subject.

1) Basic Electronics.

2) Digital system.

3) Communication Theory.

4) Integrated circuit and application.

5) Test and Measurement Techniques.

6) Digital Communication.

7) Data Communication.

8) Microcontrollers and applications.

9) Control System.

10) Digital Signal Processing.

11) Mini Projects.

12) Optical Fiber Communication.

13) Automotive electronics.

14) Image Processing.

Attachments:

1) VIIT-NI Academy MOU.

2) List LabVIEW Licenses and Instruments.

3) CLAD Certification.

4) List of CLAD certified faculty.

5) List of workshop conducted.

6) List of Experiment conducted using LabVIEW.

7) List of Students Placed in Industries.

8) List of final year projects executed based on LabVIEW.

9) Course syllabus and schedule.

BRACT's Vishwakarma Institute of Information Technology,

Department of Electronics and Telecommunication

LabVIEW Academy List of CLAD certified Staff

1. Mr. Rahul S. Pol

2. Mr. Abijit V. Chitre

3. Mr. Tushar R. Jadhav

4. Ms. Aparna B. Barbadekar

5. Ms. Smita H. Bhagwat

6. Ms. Ashwini P. Navgane

BRACT's Vishwakarma Institute of Information Technology,

Department of Electronics and Telecommunication LabVIEW Academy Equipment List

NI LabVIEW Hardware List

Purchase Date : 26/06/2012

Sr No Description Qty Amount (Rs.)

1 Computer DELL Intel Core 2 Duo E7500 (Intel 2.93GHz) 2GB RAM, 360 GB HDD

22 5,32,450.00

2 cDAQ-9174, Compact DAQ chassis (4 slot USB) 9 3,51,000.00

3 Power Cord, 250V, 10A, 9 16,200.00

4 NI 9219 4 Ch-Ch Isolated, 24-bit, ±60V, 100S/s Universal AI Module

9 5,16,600.00

5 NI 9263 4-Channel,16-Bit, +/-10 V, 100 kilo Samples/s per Channel, Analog Output Module

9 1,96,200.00

6 NI 9421 8-Channel 24 V, 100 us, Sinking Digital Input Module

9 50,400.00

7 NI 9472 8-Channel 24 V, 100 us, Sourcing Digital Output Module

9 50,400.00

8 LabVIEW Academy Course Preparation Materials 1 86,400.00

9 LabVIEW Academy Student Workbook for Student Use with Official LabVIEW Academy Program

1 1,700.00

10 NI-LabVIEW Software 2009 18 2,13,192.00

11 NI Speedy 33 DSP Board 1 29,610.00

12 Raspberry pi with clear case with accessories -charger , 26 pin GPIB cable

2 6,000.00

13 Arduino Mega (2), UNO (1) 3 2500.00

Total Amount 20,52,652.00

BRACT's Vishwakarma Institute of Information Technology,

Department of Electronics and Telecommunication

LabVIEW Conducted Workshop (40 Hours)

Sr. No. Conducted On No. Of

Participant Workshop Conducted for

1 13th July - 12 th Aug 2012 20 CEP on LabVIEW for Internal Staff

2 17th - 21st December, 2012 17 STTP for different college Staff

3 17th - 21st December, 2012 20 Students

4 05th - 09th February, 2013 33 Students

5 24th - 28th June,2013 36 Students

6 23rd - 28th December,2013 40 Students

7 7th - 11th July, 2014 51 Students

8 15th – 19th June, 2015 29 Students

Total =246 Participant (Student: 209 & Staff: 37)

BRACT's Vishwakarma Institute of Information Technology,

Department of Electronics and Telecommunication

List of Students Placed in Industries

Sr. No. Name of students Name of company Joining year

1 Ashwini Bhondwe Whirlpool Ltd. 2012

2 Kasim Tamboli Jambhekar Automation 2012

3 Sagar Doshi Propix Technology Bakers Gauges

2012

4 Shah Whirlpool Ltd. 2014

5 Bhagyashree Kalaskar Magnaflux 2014

6 Aniket Gadekar Jambhekar Automation 2014

7 Abhijit Khatavkar Jambhekar Automation 2014

8 Kartik Jain Jambhekar Automation 2014

9 Siddharth Gotikar Jambhekar Automation 2014

10 Aditya Rasal Jambhekar Automation 2015

Total = 10 Students

BRACT's Vishwakarma Institute of Information Technology,

Department of Electronics and Telecommunication

LabVIEW Based Experiment Included in Academic Curriculum

Sr. No. Subject Name Name of Experiment

1 Basic electronics / Digital electronics

Verification of Logic gates, Combinational, Sequential Circuit.

2 Data structures Implementation and Verification of Linear Search Algorithm.

3 Communication theory Simulation and Analysis of Modulation Techniques.

4 Integrated circuit and application

Simulation and analysis grounded load voltage to current converter

5 Test and measurement techniques

Introduction and implementation of small application in LabVIEW Environment.

6 Digital communication / Data communication

Simulation and Analysis of Modulation Techniques.

7 Antenna and wave propagation

Implementation of Linear Arrays.

8 Microcontrollers and applications

Interfacing Arduino Boards in LabVIEW Environment.

9 Control system Simulation and Analysis P,PI,PID Controllers

10 Mini Projects / Electronic product design

Simulation of temperature data logger

11 Optical fiber communication

Implementation of Light intensity meter

14 VLSI Implementation of 8:1 Multiplexer.

BRACT's Vishwakarma Institute of Information Technology,

Department of Electronics and Telecommunication

List of paper publish using LabVIEW

Sr. No.

Name of Author

Paper Title Published in conference/ Journal

Year of Publication

1 Mrs. S. D. Kardile

Implementing Full Adder using Lab VIEW

International Conference on

Recent Technologies, 9-12

Feb 2012, IOK College of

Engineering, Pune

2012

2 Mr. Rahul S. Pol

LabVIEW Based Four DoF Robotic Arm

Fourth International

Symposium on Control,

Automation, Industrial

Informatics and Smart Grid (ICAIS'16)

2016

Sample Copy of LabVIEW Based Experimentation included in Academic Curriculum

Content Beyond Syllabus

TITLE OF EXPERIMENT: Modulation & Demodulation of AM using LabVIEW

AIM: Generate AM waveform for given modulation index, signal frequency and carrier

Frequency.

Tools used : LabVIEW 2009

THEORY:

Introduction:

Amplitude modulation (AM) is a technique used in electronic communication, most commonly for transmitting information via a radio carrier wave. AM works by varying the strength of the transmitted signal in relation to the information being sent. For example, changes in the signal strength can be used to reflect the sounds to be reproduced by a speaker, or to specify the light intensity of television pixels. (Contrast this with frequency modulation, also commonly used for sound transmissions, in which the frequency is varied; and phase modulation, often used in remote controls, in which the phase is varied)

AM wave can be expressed as,

VAM = (Vc+ Vm Sinωmt) Sinωct

= Vc(1+ m Sinωmt) Sinωct , where m=Vm/Vc

Modulation index:-

As with other modulation indices, in AM, this quantity, also called modulation depth, indicates by how much the modulated variable varies around its 'original' level. For AM, it relates to the variations in the carrier amplitude and is defined as:

So if h = 0.5, the carrier amplitude varies by 50% above and below its unmodulated level, and for h = 1.0 it varies by 100%. To avoid distortion in the A3E transmission mode, modulation depth greater than 100% must be avoided.\

Block Diagram:

Results (Front Panel):

BRACT's Vishwakarma Institute of Information Technology,

Department of Electronics and Telecommunication

List of LabVIEW based projects executed by students.

Sr.

No. Guide Name Project Name

Completion

year

1 R. S. Pol Green House Automation. 2013

2 G. H. Chavan Speaker Recognition by using Speech

Processing. 2013

3 A. P. Navgane Data Acquisition and Control 2014

4 R. S. Pol Contact less liquid viscosity measurement. 2014

5 G. H. Chavan Wheel chair control. 2014

6 S. K. Habbu Real time ECG data acquisition and analysis. 2014

7 A. V. Chitre 32 bit Universal Counter serial Interfacing. 2011

8 S. H. Bhagwat High Frequency lock in amplifier. 2015

9 R. S. Pol LabVIEW Based Four DoF Robotic Arm 2016

10 V.M. Aranke Space Vector based Inverter 2016

Total = 10 Groups

“LabVIEW Programming Course –Forty Hours”

LESSON PLAN FOR STAFF

Day Topics Topic Details Day 1

Lesson 1: Introduction to LabVIEW

LabVIEW LabVIEW Environment Front Panel Block Diagram Dataflow Programming LabVIEW Documentation Resources Debugging Techniques

Lesson 2: Modular Programming

Modular Programming Icons and Connector Panes Using SubVIs. Creating a SubVI from Sections of a VI

Day 2 Lesson 3: Repetition and Loops

While Loops For Loops. Accessing Previous Loop Data

Lesson 4 : Making Decisions in a VI

Formula Node Making Decisions with the Select Function Case Structures

Day 3

Lesson 5 : Arrays

Arrays Auto-Indexing Array Functions Polymorphism

Lesson 6: Clusters and Strings

Clusters Cluster Functions Error Clusters Strings String Functions.

Day 4 Lesson 7: Plotting Data

Waveform Charts Waveform and XY Graphs

Lesson 8 : File I/O

File I/O VIs and Functions High-Level File I/O Vis Low-Level File I/O VI and Functions Queue , Notifier and Semaphore File I/O VIs and Functions

Day 5 Lesson 9: Data Acquisition and Waveforms

Overview and Configuration Data Acquisition in LabVIEW Analog Input Data Logging Analog Output Counters (Optional) Digital I/O (Optional)

Lesson 10: Case Study and Project Competition

“LabVIEW Programming Course –Forty Hours”

SHEDULE FOR COURSE ( Students)

Day

Topics Timings Staff

1

1.Introduction to LabVIEW Morning session Mr. Abhijit Chitre

Mr. G.H. Chavan 2. Modular Programming Evening session

2

1. Repetition and Loops Morning session

Mr. Rahul S. Pol 2. Making Decisions in a VI Evening session

3

1. Arrays Morning session Mrs. Smita H. Bhagwat

Mrs. Aparna Barbadekar 2. Clusters and Strings Evening session

4

1. Plotting Data Morning session Mrs. Ashwini Navgane

Mrs. Tushar Jadhav 2. File I/O Evening session

5

1. Data Acquisition and Waveforms

Morning session All the above staff members

2. Case Study and Project Competition

Evening session

Note:

1) Morning session – 9.00 am to 12.30pm 2) Evening session – 1.30 Pm to 5.00pm