Victory Mask™ComfortSeal Respiratory ShieldProduct Information

Custom Printing Options Available! The front shield can be printed to whatever image, picture, or logo you desire to reflect your brand and mission. Inquire about details for custom printing options.

Feel safer in a crowd with the Victory Mask. • Perfect for lecture halls, classrooms, stadiums, concert venues, and more. • Breathe easy. • Speak clearly through the sound-resonating diaphragm. • Inexpensive!

Made by Augustine Surgical Inc, a medical device manufacturer in the USA.Augustine Surgical Inc | 6581 City West Parkway | Eden Prairie, MN 55344 | 952-465-3500 | augustinesurgical.com

myvictorymask.com

Product Overview:

The dynamically conformable Victory Mask creates an effective seal around the nose and mouth with a soft, closed-cell foam mask—and without the painful pressure of an N95. Inhaled air passes through an electrostatic filter material tested to 99.99975% viral filtration efficiency. A smooth, PET respiratory shield protects the front of the respirator.

The shield and mask are reusable and easily cleanable. The filters can be replaced as necessary.

Product Features:

Clear cutaway to show mask construction

Protective Shield

Diversion wings (to reduce fogging of glasses and improve fit)

Comfort Strap

High Efficiency Electrostatic Filter

Pre-Filter

Sound Resonating Diaphragm

Dynamically Conformable Mask

Specifications:

VM99 Victory Mask with Replacement Filters

Product name: Victory Mask ComfortSeal Respiratory Shield (PN VM99)Filter Media: Technostat 200 PlusParticle Filtration: 99.99975% viral filtration efficiency (see Technical Data Sheet for full specs)Sizes: Small, Regular, LargeExhalation Valve: NoneStrap Attachment: AdjustableMfg Shelf Life: 2 yearsTarget Area: Nose and mouthLiquid Barrier: Respiratory Shield

MaterialsFoam Mask: Expanded closed cell polyvinyl chloride/acrylonitrile butadiene blended foam rubberShield: Polyester FilmStraps and cordstop: Nylon paracordFilter Material: Technostat 200 PlusPre-Filter Material: Polyester fabric

Meets flammability requirements. Made without natural rubber latex.

How does the Victory Mask Compare?

Masks are worn for both Source Control (SC) to retard spewing out virus and Personal Protective Equipment (PPE) to prevent the wearer from inhaling the aerosolized virus.

This analysis is a summary of available evidence showing the effectiveness of commonly used masks as SC or PPE. This information is derived from data available from the University of Minnesota Center for Infectious Disease Research and Policy (cidrap.umn.edu/news-perspective/2020/04/commentary-masks-all-covid-19-not-based-sound-data) Victory Mask information from Augustine Surgical Inc.

*Respirators only work as PPE when they are the right size and have been fit-tested to demonstrate an adequate seal around the face.

The Victory Mask is not N95-certified. N95 testing examines breathability and performs a sodium-load test at high flow rates. The electrostatic filter used with the Victory Mask is not designed to be used in heavily particle-laden industrial environments, and for this reason does not meet N95 designation. To pass N95 salt-load tests, N95s require a meltblown material layer to block the filter from loading with NaCl particles. This simulates particle-laden industrial environments. The downside of this type of test is that the meltblown layer significantly reduces the breathability of the filter material, which forces more air around imperfect seals. It is our belief that the N95 salt-load test is detrimental to the design of PPE used for non-industrial applications.

Type of Mask Source ControlPersonal

Protection (PPE)Comfort

Cloth Mask Ø Ø ✓Surgical Mask Ø Ø ✓N95 FFR (w/ valve) Ø ✓* ØN95 FFR (w/o valve) ✓ ✓* ØVictory Mask ✓ ✓* ✓

MyVictoryMask.com

Augustine Surgical Inc.

Frequently Asked Questions

Q: What’s a “Respiratory Shield?”

A: It’s more than a mask, more than a respirator, and more than a shield. Respirators, like N95s, squeeze so tightly that the wearer’s face can be bruised…or even scarred. Traditional cloth or paper masks are a barrier to splashes, droplets, and biological fluids and protect others from the wearer’s coughs and sneezes, but fit so loosely that they provide little pro-tection to the wearer. Face shields are simply a wall—a barrier to particles.

The Victory Mask improves on all 3. The respirator portion seals gently against the mouth and nose, filtering both exhalation and inhalation. The PET shield blocks aerosolized droplets. Together, they mask the face…protecting against dangerous airborne particles.

Q: Is the Victory Mask NIOSH-certified?

A: No—and it doesn’t need to be NIOSH, the National Institute for Occupational Safety and Health is a branch of the CDC that certifies respirators to the N95 standard, among others. The Victory Mask is not an N95. Because it does not injure the face, but still provides excellent protection, it is (in our opinion) much better than an N95 for non-industrial applica-tions.

Q: What is the NIOSH N95 testing?

A: N95 certification is essentially an industrial standard and requires passing three tests that examine valve leakage, breathability, and a sodium load test.

Q: How was the Victory Mask tested?

A: The filtration material used in the Victory Mask was tested by Nelson Labs, an independent testing agency, to the stan-dards outlined in the technical data sheet.

Q: How often should I replace the Victory Mask’s filter?

A: How often you should replace your filter depends on usage and the environment. For general use, the filter should last approximately two weeks. In heavily polluted environments, you may need to switch the filter more often. In high-risk situ-ations, like hospitals, follow institutional protocols.

Q: Can the filters be cleaned and reused?

A: No.

Q: Can the Victory Mask (other than the filter) be disinfected?

A: Yes. The Victory Mask can be cleaned through routine disinfection protocols.

Q: Will the Victory Mask help protect me against COVID-19?

A: Help? Of course, it will…and much better than the cloth and paper masks often seen in public. Provide absolutely protec-tion? No.

Most masks do not filter particles of the size of the COVID-19 virus, and because they do not seal well to your face, they will allow virus particles to pass around the filter.

The Victory Mask’s soft, closed-cell foam provides an exceptional seal. The filter material is highly efficient at removing harmful particulate matter.

Of course, no mask or respirator can protect you perfectly from infection. Filtering respiration and blocking aerosols are just a part of protecting yourself against the risk of infection. It is important to wash your hands frequently, avoid touching your eyes, nose and mouth, as well as avoiding close contact with others who may be infected.

Disclaimer: The statements, technical information and recommendations contained in this document are supplied for information purposes only. The technical data has been provided to Augustine Surgical Inc by third parties and is provided without warranty or guarantee as to the accuracy of the information. Augustine Surgical’s products and the information provided on the corresponding Technical Data Sheet are provided “as-is” for your use without any representation, warranties, or conditions of any kind, either expressed or implied, including all implied warranties or conditions of merchantability, merchantable quality, fitness for a particular purpose, durability, title and noninfringement. Augustine Surgical Inc, disclaims any liability for damage, injury, loss or expense that results from the direct or consequential use of the above data. Users should consider this information only as a supplement to other information gathered by them and must make independent determinations of suitability and accuracy of information from all sources to assure the proper use and disposal of these materials.

MyVictoryMask.com

Augustine Surgical Inc.

TTEECCHHNNIICCAALL DDAATTAA SSHHEEEETT

PPRROODDUUCCTT IIDD:: TTEECCHHNNOOSSTTAATT®® 220000 PPLLUUSS

TECHNICAL DATA WEIGHT COLOR MATERIAL COMPOSITION

TECHNOSTAT®

SCRIM

200 g/m2

15 g/m2

WHITE

WHITE

BLENDED SYNTHETIC FIBER

SPUNBOND POLYPROPYLENE

TOTAL MEDIA WEIGHT 215 g/m2

AVAILABLE FORMS

SINGLE OR DOUBLE LAMINATED SCRIM / MELTBLOWN MEDIAROLLS, SHEETS, COILS (SLIT TO WIDTH) & FABRICATED PARTS (INCLUDING HEAT SEALED OR WELDED)

FILTRATION PERFORMANCE

NaCl Penetration at 32 LPM < 0.10% Tested in accordance to TSI8130 NaCl 0.1 micron particle size

NaCl Efficiency at 32 LPM > 99.90% Tested in accordance to TSI8130 NaCl 0.1 micron particle size

Pressure Drop at 32 LPM < 2.3 mm H2O Tested in accordance to TSI8130 NaCl

0.1 micron particle size

BFE Efficiency > 99.99990% Tested in accordance to Spec MIL-M-36954C By Nelson Labs

VFE Efficiency > 99.99975% Tested in accordance to Spec MIL-M-36954C By Nelson Labs

Air Permeability** > 85 CFM Tested in accordance to ASTM Spec ASTM D373

Material Specifications are in accordance with ASTM Standards for Evaluating Non-Woven Textiles The tolerances are based on an average of data points taken in a defined area of the roll goods These specifications are void once the material has been converted All tolerances and data subject to change

©Superior Felt & Filtration, LLC • 1150 Ridgeview Drive • McHenry, IL. 60050 (800) 255-3358 • Fax: (815) 759-1212 • website: www.superiorfelt.com

ISO9001:2008

Technical Data Sheet for Filtration Fabric

MyVictoryMask.com

Augustine Surgical Inc.