Vickers Hardness Tester -...
Transcript of Vickers Hardness Tester -...
Vickers Hardness Tester
© Tamsui Vietnam Company Limited
Vickers Hardness Tester
Add: 6th Floor, Nguyen Hung Phu Building, 400 Nguyen Thi Thap Street, Tan Quy Ward, District 7, HCMC, Vietnam
TEL: 08-8-37711635 FAX: 08-37711691
E-mail : [email protected]
Website : http://tamsui.vn/
2
Vickers Hardness Tester
Shift with Motorized Turret /
HB, HRC, HRA, HRB, HRN, HRT
HV / HK
TMHV-10D
Easy to read Large LCD Screen
P.4
With Motorized Turret
Built-in printer and a RS232 serial interface
1HV ~ 2967HV
0.250μm(100X)
100X、200X
(0~60)s
Automatic(loading/holding-up of loading /unloading)
1、2、2.5、3、5、10、20、30、50
9.807、19.61、24.52、29.42、49.03、98.07、196.1、249.2、490.3
----
THV-50D
P.5
TMHV-50DTHV-10DModel No.
Shift with Motorized Turret /
HB, HRC, HRA, HRB, HRN, HRT
With Motorized Turret
Objective, Indenter switch / Exchange scale
HV / HK----Measurement Method
Carriage Control
Test Forces
Easy to read Large LCD Screen
P.6
2.942, 4.903, 9.807, 19.61, 24.52, 29.42, 49.03, 98.07
N
kgf 0.3, 0.5, 1, 2, 2.5, 3, 5, 10
100X, 400XAmplification of the microscope
0.125um(200X)Min. measuring resolution Rate
Holding time
Output
Testing field
P.3
With Computer automatic measuring SystemP.8
With Video Measuring DeviceP.7
THV-CCDTHV-LCDOption
© Tamsui Vietnam Company Limited
Vickers Hardness Tester
3
■ THV-10DFeatures:
This Digital Vickers Hardness Tester made with a unique and precision design in the field of mechanics, optics and light source is able to produce a clearer indentation image and hence a more precise measurement.
Equipped with 10x lens and 40x lens objectives(for 10kg) can be used for measurement purpose, the tester has a wider measurement field and a broader usage range ester has a wider measurement field and a broader usage range..
Equipped with a digital microscope, it shows the measuring methods, the test force, the indentation length, the hardness value, the dwell time of the test force as well as the number of measurements - all shown on its LCD screen , without inputting the value of diagonal length for the indentation and look up the hardness values from hardness table.
The CCD pickup camera device and image handling system can be equipped on the tester and the video device as well.
With a special thread interface, it can be linked with video measuring device and indentation automatically measuring device without changing optical path.
Uniquely adopts cold light source, the usage life of light source reach 100,000 hours.
Technical parameters:
60kgWeight620 × 450 × 740 (mm)Package Dimension
With Motorized TurretLens / Indenter switch
0.125μm(200X)Min. measuring resolution Rate
Built-in printer and a RS232 serial interfaceOutput
(0~60)s
25 × 25 mmMovement field of the XY table
110V / 220V, 60 / 50 Hz
130 mm
Power
Max. width of the specimen
----Measurement Method
Automatic(loading/holding-up of loading /unloading)Carriage Control
Test Forces2.942, 4.903, 9.807, 19.61, 24.52, 29.42, 49.03, 98.07N
1HV ~ 2967HV
10X Digital Micro Lens、Level、Adjustable Screw、Vickers Hardness blocks
kgf 0.3, 0.5, 1, 2, 2.5, 3, 5, 10
XY-stage test tableStandard accessories
170 mmMax. height of the specimen
Cold light sourceLight source
100X, 400XAmplification of the microscope
100 × 100 mmDimension of the XY table
Holding time
Testing field
Digital Vickers Hardness Tester
Usage RangeFerrous metals, non-ferrous metals,
IC thin sections, coating, ply-metals;
Glass, ceramics, agate,precious stone, thin plastic sections, etc.
Hardness testing such as that on the depth and the trapezium of thecarbonized layers and quenched layers.
© Tamsui Vietnam Company Limited
Vickers Hardness Tester
By means of closed-circuit system for control, CPU controls testing force to load, dwell and unload, the sensor feedback information, therefore the lost of testing force vale can be automatically compensated during testing and hence the testing force more accuracy.
The indenter is directly equipped on the pressure sensor, therefore the transitive error of test force is reduced.
4
■ TMHV-10DFeatures:
With motorized turret, the indenter and objectives can be shifted automatically.
Due to the excellent combination between the indenter and pressure sensor, the transitive error of test force is reduced.
Measure the Vickers/Knoop hardness values (HV/HK) from HV0.3 to HV10 and HK0.3 to HK10. Select the test force directly.
With function of automatic exchanging hardness scales (HB,HRC,HRA,HRB,HRN,HRT).
All information such as diagonal lines length of indentation, hardness values, data statistics and hardness exchange values, etc are displayed on the LCD screen.
With the thin film keyboard, various technical data can be inputted in. Press the START key, the whole test procedure can be carried out automatically.
Technical parameters:
60kgWeight620 × 450 × 740 (mm)Package Dimension
XY-stage test tableStandard accessories
Shift with Motorized Turret / HB, HRC, HRA, HRB, HRN, HRT
Objective, Indenter switch / Exchange scale
0.125μm(200X)Min. measuring resolution Rate
Built-in printer and a RS232 serial interfaceOutput
25 × 25 mmMovement field of the XY table
110V / 220V, 60 / 50 Hz
130 mm
Power
Max. width of the specimen
HV / HKMeasurement Method
Automatic(loading/holding-up of loading /unloading)Carriage Control
Test Forces2.942, 4.903, 9.807, 19.61, 24.52, 29.42, 49.03, 98.07N
1HV ~ 2967HV
(0~60)s
10X Digital Micro Lens、Level、Adjustable Screw、Vickers Hardness blocks
kgf 0.3, 0.5, 1, 2, 2.5, 3, 5, 10
170 mmMax. height of the specimen
Cold light sourceLight source
100X, 400XAmplification of the microscope
100 × 100 mmDimension of the XY table
Holding time
Testing field
Digital Vickers Hardness Tester
Usage RangeFerrous metals, non-ferrous metals,
IC thin sections, coating, ply-metals;
Glass, ceramics, agate,precious stone, thin plastic sections, etc.
Hardness testing such as that on the depth and the trapezium of the carbonized layers and quenched layers.
© Tamsui Vietnam Company Limited
Vickers Hardness Tester
5
■ THV-50DFeatures:
This Digital Vickers Hardness Tester made with a unique and precision design in the field of mechanics, optics and light source is able to produce a clearer indentation and hence a more precise measurement.
By means of a 10x lens,20x lens or 20x lens and 40x lens , the tester has a wider measurement field and a broader usage range. The set of lens (2 pieces lens ) can be selected according to the user’s requirement.
Equipped with a digital microscope, it shows the measuring methods, the test force, the indentation length, the hardness value, the dwell time of the test force as well as the number of measurements - all shown on its LCD screen , without inputting the value of diagonal length for the indentation and look up the hardness values from hardness table.
With a special thread interface, it can be linked with video measuring device and indentation automatically measuring device without changing optical path.
Uniquely adopts cold light source, the usage life of light source reach 100000 hours.
By means of closed-circuit system for control, CPU controls testing force to load, dwell and unload, the sensor feedback information, therefore the lost of testing force vale can be automatically compensated during testing and hence the testing force more accuracy.
The indenter is directly equipped on the pressure sensor, therefore the transitive error of test force is reduced.
Technical parameters:
60kgWeight620 × 450 × 740 (mm)Package Dimension
With Motorized TurretLens / Indenter switch
0.250μm(100X)Min. measuring resolution Rate
Built-in printer and a RS232 serial interfaceOutput
(0~60)s
------Movement field of the XY table
110V / 220V, 60 / 50 Hz
130 mm
Power
Max. width of the specimen
----Measurement Method
Automatic(loading/holding-up of loading /unloading)Carriage Control
Test Forces9.807、19.61、24.52、29.42、49.03、98.07、196.1、249.2、490.3N
1HV ~ 2967HV
10X Digital Micro Lens、Level、Adjustable Screw、Vickers Hardness blocks
kgf 1、2、2.5、3、5、10、20、30、50
Largest test table、“V”Shape test tableStandard accessories
170 mmMax. height of the specimen
Cold light sourceLight source
100X、200XAmplification of the microscope
------Dimension of the XY table
Holding time
Testing field
Digital Vickers Hardness Tester
Usage RangeFerrous metals, non-ferrous metals,
IC thin sections, coating, ply-metals;
Glass, ceramics, agate,precious stone, thin plastic sections, etc.
Hardness testing such as that on the depth and the trapezium of thecarbonized layers and quenched layers.
© Tamsui Vietnam Company Limited
Vickers Hardness Tester
6
■ TMHV-50DFeatures:
With motorized turret, the indenter and objectives can be shifted automatically.
Due to the excellent combination between the indenter and pressure sensor, the transitive error of test force is reduced.
Measure the Vickers/Knoop hardness values (HV/HK) from HV1 to HV50 and HK1 to HK50. Select the test force directly.
With function of automatic exchanging hardness scales (HB,HRC,HRA,HRB,HRN,HRT).
All information such as diagonal lines length of indentation, hardness values, data statistics and hardness exchange values, etc are displayed on the LCD screen.
With the thin film keyboard, various technical data can be inputted in. Press the START key, the whole test procedure can be carried out automatically.
Technical parameters:
60kgWeight620 × 450 × 740 (mm)Package Dimension
Largest test table、“V”Shape test tableStandard accessories
Shift with Motorized Turret / HB, HRC, HRA, HRB, HRN, HRT
Objective, Indenter switch / Exchange scale
0.250μm(100X)Min. measuring resolution Rate
Built-in printer and a RS232 serial interfaceOutput
------Movement field of the XY table
110V / 220V, 60 / 50 Hz
130 mm
Power
Max. width of the specimen
HV / HKMeasurement Method
Automatic(loading/holding-up of loading /unloading)Carriage Control
Test Forces9.807、19.61、24.52、29.42、49.03、98.07、196.1、249.2、490.3N
1HV ~ 2967HV
(0~60)s
10X Digital Micro Lens、Level、Adjustable Screw、Vickers Hardness blocks
kgf 1、2、2.5、3、5、10、20、30、50
170 mmMax. height of the specimen
Cold light sourceLight source
100X、200XAmplification of the microscope
------Dimension of the XY table
Holding time
Testing field
Digital Vickers Hardness Tester
Usage RangeFerrous metals, non-ferrous metals,
IC thin sections, coating, ply-metals;
Glass, ceramics, agate,precious stone, thin plastic sections, etc.
Hardness testing such as that on the depth and the trapezium of the carbonized layers and quenched layers.
© Tamsui Vietnam Company Limited
Vickers Hardness Tester
7
■ THV-LCD
Description:
PS-2006 Video Measuring Device is composed of CCD measuring equipment,6.8 inch colored LCD and other relative components.
With PS-2006 Video Measuring Device,the indention originally shown on objective of hardness tester is now display on the LCD directly.
The working procedure is more visual and measuring is more accurate. Avoid seeing weariness and man-made error,and increase working efficiency. Many people can observe the working process at the same time. So the tester is warmly welcomed by many operators.
THV-LCD Series Video Measuring Digital Vickers Hardness Tester
You can choose
THV-10D / 50D
TMHV-10D / 50D
© Tamsui Vietnam Company Limited
Vickers Hardness Tester
This is a new type hardness tester which is equipped a PS-2006 Video Measuring Device on the main body of Digital Vickers Hardness Tester.
8
■ THV-CCD
Description: By means of CCD Camera interface,connect Vickers hardness tester with computer.
Whole testing operation can be processed by operating keyboard and mouse,therefore the operation is easy and measuring precision is high.
Maximum decrease man-made error and avoid seeing weariness of the operator. It is an advance hardness tester which can meet the needs of various Digital Vickers hardness testing.
THV-CCD Series Automatically Image Measuring Digital Vickers Hardness Tester
© Tamsui Vietnam Company Limited
Vickers Hardness Tester
Measuring and control system of the tester adopts high-resolving power image device to display indentation clearly on the screen of computer.
Transformed signal by software,automatically measure hardness value of testing indentation.
According to the process of point testing and continuously testing,make out the curve drawings of depth and trapezium.
Support WIN9X、WINNT、WIN2000、WINXP etc.Operating system.
It can test micro Vickers,Knoop,carburized layers,etc.
Hardness value can be automatically exchanged with many methods.
According to your requirement,you can select high power or low power objective.
Definition of image:>540
It can adjust contrast and brightness etc.of indentation image.
It can dispose image file and data file to open,memory,print etc
It can look into the data file and image file at any time,Data file is printed to adopt table format and curvilinear format.
Besides standard accessories of original base instrument,this tester also equipped with special tube camera. Computer Printer,etc.
Technical Function and Characteristics:
You can choose
THV-10D / 50D
TMHV-10D / 50D
It combines computer automatic measuring system with Hardness tester .