VG1 ED L Voltaire rchitectural urface/Garage ight · Vibration (ANSI C136.31-2001), CT direct...
4
ORDERING EXAMPLE: VG1 - L100/740 - T5 - SM - DBZ - OPTIONS - DIM - UNV ORDERING INFO SERIES LUMENS [1] CRI CCT DISTRIBUTION [2] VG1 L30 3,000lm L65 6,500lm L100 10,000lm 7 70 30 3000K 40 4000K 50 5000K T3 Type III T5 Type V TFL Type Flood MOUNTING CONFIGURATION FINISH OPTIONS [3] SM Surface mount to 4” maximum J-box (by others) [4] PM Rigid pendant mount (pendant by others) with counter weights included. CT Closed top for direct surface mounting. [5] BLK Black (RAL #9004) DBZ Dark bronze DBR Medium bronze GRAY Standard gray SLV Satin aluminum (RAL #9006) WHT White (RAL #9003) OPTIONS DRIVER VOLTAGE SF Single fuse [6] DF Double fuse [7] WG Wireguard, chrome, [8] EM/6WC 6-watt emergency, low temperature battery [9] EM/10CEC 10-watt emergency CEC qualified battery [10] OCCWS FSP-211-L_ Factory-installed occupancy and daylight sensor [11] WG-VG Wireguard kit, chrome, field-installed, (4) 10-24 screws included FSIR-100 Remote controller for occupancy sensor [12] PMVG__-___ Rigid pendant stem and canopy kit DIM Dimming driver prewired for 0-10V low voltage applications 120 120V 208 208V 240 240V 277 277V UNV 120-277V 347 347V [13] 480 480V [14] NOTES 1 Lumen output based on 4000 CCT. Actual lumens may vary +/-5%, see page 2 for FIXTURE PERFORMANCE DATA. 2 See page 2 for DISTRIBUTION DETAILS. 3 See page 4 for FINISH OPTIONS. 4 Two 1/2” NPS threaded and plugged conduit side entry points provided. 5 Two 1/2” NPS threaded and plugged conduit side entry points provided. 6 120V, 277V, or 347V only; must specify voltage 7 208V, 240V, or 480V only; must specify voltage 8 Factory-installed 9 Not available with L100 lumen package; 38°C maximum ambient temperature; 120-277V only 10 Not available with L100 lumen package; 40°C maximum ambient temperature; 120-277V only 11 Must specify lens. Optional FSIR-100 remote controller available, ordered separately. See page 4 for OCCUPANCY SENSOR DETAILS. 12 Must specify quantity required per project. See page 4 for OCCUPANCY SENSOR DETAILS. 13 Includes stepdown transformer 14 Includes stepdown transformer CATALOG #: ���������������������������������������������� TYPE: ���������������������������������������������������� PROJECT: ������������������������������������������������� Maximum Weight: 25 Lbs FEATURES ■ Rugged and durable housing with IP66 rating ■ Quick and easy installation with hinged two-piece enclosure ■ Made Right Here® in the USA SPECIFICATIONS ■ HOUSING – Two-piece hinged die-cast aluminum enclosure. ■ THERMAL MANAGEMENT – Integral die- cast aluminum heat sink and LED module provide passive thermal management. Rated ambient operating temperature -30ºC to 50ºC (L30), -30ºC to 40ºC (L65, L100). ■ OPTICAL SYSTEM – Precision, injection- molded, refractive optics available in standard IES distributions. Clear tempered glass lens. ■ LED MODULE – ANSI 3000K, 4000K, or 5000K CCT, minimum 70 CRI LEDs. ■ LED DRIVER – Class 1 constant-current driver, 0-10V dimming. ■ ELECTRICAL – 120-277, 347, and 480 VAC input range; 50-60Hz; power factor >.90; THD <20% at full load. FCC Class A compliant. 10kA/10kV surge protection standard. Quick-disconnect wiring provided. L70 >60,000 hours per IES TM-21. Conduit/power entry must be sealed to prevent moisture or water intrusion. ■ FINISH – Super durable polyester powder coat bonded to phosphate-free, multi-stage pretreated metal, meets and exceeds AAMA 2604 specifications for outdoor durability. ■ MOUNTING – Surface or pendant mount. Maximum weight: 25 lbs. ■ LISTINGS – ■ cCSAus certified as luminaire suitable for wet locations. Suitable for dry or damp locations when specified with PM mounting configuration. ■ DesignLights Consortium qualified product. Not all versions of this product may be DLC qualified, see the DLC Qualified Products List at www.designlights.org/QPL. ■ IP66 rated. ■ Meets the American National Standard for Roadway Lighting Equipment – Luminaire Vibration (ANSI C136.31-2001), CT direct surface mounting configuration only. ■ IDA Dark-Sky approved. ■ RoHS compliant. ■ BUG classified per IES TM-15-11. ■ WARRANTY – 5-year limited warranty, see hew.com/warranty. 5-7/8” 13-1/2” 13” 3” minimum clearance H.E. Williams, Inc. Carthage, Missouri www.hew.com 417-358-4065 Designed and Manufactured in the USA Information contained herein is subject to change without notice. Wall Mount Page 1 of 4 HEW.70440.HP REV.10/25/19 VG1 LED Voltaire Architectural Surface/Garage Light
Transcript of VG1 ED L Voltaire rchitectural urface/Garage ight · Vibration (ANSI C136.31-2001), CT direct...
ORDERING EXAMPLE: VG1 - L100/740 - T5 - SM - DBZ - OPTIONS - DIM - UNV
ORDERING INFOSERIES LUMENS [ 1 ] CRI CCT DISTRIBUTION [ 2 ] VG1 L30 3,000lm
L65 6,500lmL100 10,000lm
7 70 30 3000K40 4000K50 5000K
T3 Type IIIT5 Type VTFL Type Flood
MOUNTING CONFIGURATION FINISH OPTIONS [3 ]
SM Surface mount to 4” maximum J-box (by others) [4 ]
PM Rigid pendant mount (pendant by others) with counter weights included.
CT Closed top for direct surface mounting. [ 5 ]
BLK Black (RAL #9004)DBZ Dark bronzeDBR Medium bronzeGRAY Standard graySLV Satin aluminum (RAL #9006)WHT White (RAL #9003)
OPTIONS DRIVER VOLTAGESF Single fuse [6 ]
DF Double fuse [ 7 ]
WG Wireguard, chrome, [ 8 ]
EM/6WC 6-watt emergency, low temperature battery [ 9 ]
EM/10CEC 10-watt emergency CEC qualified battery [ 1 0 ]
OCCWS FSP-211-L_ Factory-installed occupancy and daylight sensor [ 1 1 ]
WG-VG Wireguard kit, chrome, field-installed, (4) 10-24 screws included
FSIR-100 Remote controller for occupancy sensor [ 1 2 ]
PMVG__-___ Rigid pendant stem and canopy kit
DIM Dimming driver prewired for 0-10V low voltage applications
120 120V208 208V240 240V277 277VUNV 120-277V347 347V [ 1 3 ]
480 480V [ 1 4 ]
NOTES1 Lumen output based on 4000 CCT. Actual lumens may vary
+/-5%, see page 2 for FIXTURE PERFORMANCE DATA.2 See page 2 for DISTRIBUTION DETAILS.3 See page 4 for FINISH OPTIONS.4 Two 1/2” NPS threaded and plugged conduit side entry points
provided.5 Two 1/2” NPS threaded and plugged conduit side entry points
provided.6 120V, 277V, or 347V only; must specify voltage7 208V, 240V, or 480V only; must specify voltage8 Factory-installed9 Not available with L100 lumen package; 38°C maximum ambient
temperature; 120-277V only1 0 Not available with L100 lumen package; 40°C maximum ambient
temperature; 120-277V only
1 1 Must specify lens. Optional FSIR-100 remote controller available, ordered separately. See page 4 for OCCUPANCY SENSOR DETAILS.
1 2 Must specify quantity required per project. See page 4 for OCCUPANCY SENSOR DETAILS.
1 3 Includes stepdown transformer1 4 Includes stepdown transformer
CATALOG #: ����������������������������������������������
TYPE: ����������������������������������������������������
PROJECT: �������������������������������������������������
Maximum Weight: 25 Lbs
FEATURES ■ Rugged and durable housing with IP66
rating ■ Quick and easy installation with hinged
two-piece enclosure ■ Made Right Here® in the USA
SPECIFICATIONS ■ HOUSING – Two-piece hinged die-cast
aluminum enclosure. ■ THERMAL MANAGEMENT – Integral die-
cast aluminum heat sink and LED module provide passive thermal management. Rated ambient operating temperature -30ºC to 50ºC (L30), -30ºC to 40ºC (L65, L100).
■ OPTICAL SYSTEM – Precision, injection-molded, refractive optics available in standard IES distributions. Clear tempered glass lens.
■ LED MODULE – ANSI 3000K, 4000K, or 5000K CCT, minimum 70 CRI LEDs.
■ LED DRIVER – Class 1 constant-current driver, 0-10V dimming.
■ ELECTRICAL – 120-277, 347, and 480 VAC input range; 50-60Hz; power factor >.90; THD <20% at full load. FCC Class A compliant. 10kA/10kV surge protection standard. Quick-disconnect wiring provided. L70 >60,000 hours per IES TM-21. Conduit/power entry must be sealed to prevent moisture or water intrusion.
■ FINISH – Super durable polyester powder coat bonded to phosphate-free, multi-stage pretreated metal, meets and exceeds AAMA 2604 specifications for outdoor durability.
■ MOUNTING – Surface or pendant mount. Maximum weight: 25 lbs.
■ LISTINGS – ■ cCSAus certified as luminaire suitable
for wet locations. Suitable for dry or damp locations when specified with PM mounting configuration.
■ DesignLights Consortium qualified product. Not all versions of this product may be DLC qualified, see the DLC Qualified Products List at www.designlights.org/QPL.
■ IP66 rated. ■ Meets the American National Standard for
Roadway Lighting Equipment – Luminaire Vibration (ANSI C136.31-2001), CT direct surface mounting configuration only.
■ IDA Dark-Sky approved. ■ RoHS compliant. ■ BUG classified per IES TM-15-11.
■ WARRANTY – 5-year limited warranty, see hew.com/warranty.
5-7/8”13-1/2”
13”
3”minimumclearance
H.E. Williams, Inc. Carthage, Missouri www.hew.com 417-358-4065 Designed and Manufactured in the USAInformation contained herein is subject to change without notice.
Wall Mount Page 1 of 4HEW.70440.HP REV.10/25/19
VG1 LED Voltaire Architectural Surface/Garage Light
FIXTURE PERFORMANCE DATADISTRIBUTION CCT DELIVERED LUMENS WATTAGE EFFICACY (LM/W) BUG RATING
L30
Type III3000 2964
36
82.3B2-U0-G24000 3170 88.1
5000 3250 90.3
Type V3000 2825 78.5
B3-U0-G24000 3022 83.95000 3097 86.0
Type FL3000 3193 88.7
B3-U0-G14000 3416 94.95000 3501 97.3
L65
Type III3000 5935
69
86.0B2-U0-G24000 6348 92.0
5000 6507 94.3
Type V3000 5697 82.6
B3-U0-G24000 6094 88.35000 6246 90.5
Type FL3000 6380 92.5
B3-U0-G14000 6824 98.95000 6995 101.4
L100
Type III3000 8846
102
86.7B2-U0-G24000 9610 94.2
5000 9649 94.6
Type V3000 8610 84.4
B3-U0-G24000 9065 88.95000 9489 93.0
Type FL3000 9529 93.4
B3-U0-G14000 10192 99.95000 10448 102.4
■ Photometrics tested in accordance with IESNA LM-79. Results shown are based on 25°C ambient temperature.
■ Wattage shown is average for 120V through 277 input.
DISTRIBUTION DETAILS
T3 T5 TFL
Type III Type V Type Flood
CROSS SECTIONS
FRONT VIEW BACK VIEW
5-7/8”13-1/2”
13”
3”minimumclearance
7”
4-5/8”
16”
H.E. Williams, Inc. Carthage, Missouri www.hew.com 417-358-4065 Designed and Manufactured in the USAInformation contained herein is subject to change without notice.
Wall Mount Page 2 of 4HEW.70440.HP REV.10/25/19
VG1 LED Voltaire Architectural Surface/Garage Light
OPTIONS DETAILS
WG-VG PMVGWIREGUARD KIT (FIELD INSTALLED)Kit Includes
■ 10-3/8” x 11-1/2” chrome wireguard ■ (4) 10-24 screws
PENDANT MOUNT KIT ORDERING EXAMPLE: PMVG - 12 - DBR
SpecifyLength inInches
SERIES LENGTH FINISH OPTIONSPMVG Optional rigid pendant
stem and canopy kit for use with VG1. Includes:
■ 1/2” IP stem, specify length
■ 1/2” IP crossbar with ground screw
■ ø5” canopy, 7/8” deep ■ (2) 1/2” IP locknuts ■ 1/2” bushing/reducer
Notes: ■ 4” maximum octagon J-box by
others. ■ Suitable for dry or damp locations.
Specify length in inches, 6” minimum, 96” maximum.
Example: 20 = 20”
BLK Black (RAL #9004)DBZ Dark bronze DBR Medium bronzeGRAY Standard grayGRN Green (RAL #6005)SLV Satin aluminum (RAL #9006)WHT White (RAL #9003)
For custom color options, visit the VG1 at hew.com.
(Fixture Not Included)
MOUNTING DETAILS
SURFACE MOUNTSM Surface mount to 4’ maximum J-box (by others). Two
1/2” NPS threaded and plugged conduit side entry points provided. Weight: 22 Lbs.
4-7/8”3-1/2”2-3/4”
ø3/4”J-box byothers
Side View Top View Bolt Pattern Detail
PENDANT MOUNTPM Rigid pendant mount (pendant by others) with counter
weights included. Weight: 25 Lbs.
Pendantby others
3/4” NPS
Side View Top View
CLOSED TOPCT Closed top for direct surface mounting. Two 1/2”
NPS threaded and plugged conduit side entry points provided. Weight: 22 Lbs.
3/4” NPS Plug
Side View Top View
H.E. Williams, Inc. Carthage, Missouri www.hew.com 417-358-4065 Designed and Manufactured in the USAInformation contained herein is subject to change without notice.
Wall Mount Page 3 of 4HEW.70440.HP REV.10/25/19
VG1 LED Voltaire Architectural Surface/Garage Light
OCCUPANCY SENSOR DETAILS
OCCUPANCY SENSOR DETAILSEXAMPLE: OCCWS FSP-211-L2 OCCUPANCY SENSOR ORDERING INFORMATIONFEATURES OCCWS FSP-211__ Factory-installed occupancy and daylight
sensor, must specify lens (120V or 277V only)
■ Fully adjustable high and low dimmed light levels. ■ Designed for LED fixtures; rated for extreme temperatures
and up to 200,000 on/off cycles. ■ Hold-off setpoint with automatic calibration option for
convenience and added energy savings. ■ Adjustable via handheld wireless configuration tool
(ordered separately, see page 4). ■ IP66 rated with choice of lenses for wet and outdoor
locations, and mounting heights from 8’ to 20’. ■ Adjustable time delay and cutoff delay. ■ Factory set to 10% dimming at 5 minutes,
cutoff at 1 hour.
LENSL2 Coverage at 8’ mounting height: ø48’L3 Coverage at 20’ mounting height: ø40’
COVERAGE PATTERNS REMOTE CONTROLLERL2 LENS L3 LENS FSIR-100 Remote controller for occupancy
sensor (specify quantity per project)Initial setup and subsequent sensor adjustments are made using a handheld configuration tool (FSIR-100). The wireless tool stores up to five sensor parameter profiles to speed configuration of multiple sensors. Please specify quantity required per project.
Visit www.wattstopper.com for more information.
0'
8'0' 3'3' 7'7' 11' '42'1124'
0’3’ 9’6’3’6’9’ ’21’21
10’
20’
0’
15’
5’
15’18’ ’02’81’51’02
FINISH OPTIONSWHITE BLACK GREEN MEDIUM BRONZE DARK BRONZE SILVER GRAY
For custom color, please specify RAL code or a manufacturer code with description. All custom colors other than RAL require two sample swatches, minimum 1” square.
H.E. Williams, Inc. Carthage, Missouri www.hew.com 417-358-4065 Designed and Manufactured in the USAInformation contained herein is subject to change without notice.
Wall Mount Page 4 of 4HEW.70440.HP REV.10/25/19
VG1 LED Voltaire Architectural Surface/Garage Light
