VFA Pricelist.pdf

2014 Price ListGate Valves

Service Connection Valves

Hydrants

Butterfly Valves

Novo Plug-in System

Accessories

Pressure Pipe Fittings • Flanged Pipes • Thrust-Resistant Joints

Pressure Pipe Fittings with Novo Socket

Pressure Pipe Fittings for Plastic Pipelines

Pipe Fittings for Sewage Pipelines

FiTTiNgS aNd valveS

2014 price list

Düker fittings and valves

Notes / PricingAll prices in this price list supersede those in all previous price lists

Our delivery programme of fittings, flanged pipes and valves DN 40 up to DN 1200 is contained in our catalogue „Fittings, flanged pipes and valves made of ductile cast iron GGG“ with the corresponding specifications. Please also observe our laying and operating instructions on the internet.

All prices are in Euro and do not include VAT (manufacturer‘s suggested retail prices).

Socket and Flange Connections:The listed prices are valid for socket fittings including the following connections:

SMU: Screwed socket „Union“ including screw ring, EPDM rubber gasket, gliding ring

TYT: Tyton socket including Tyton rubber gasket EPDM

Novo: Novo socket on fittings including NOVO-SIT® ring and Tyton rubber gasket EPDM;

Valves without NOVO-SIT® ring and Tyton rubber gasket

STO: bolted-gland socket including bolted gland ring, rubber gasked EPDM, hammer head bolts and nuts

KS: push-in sockets for PVC pipes including socket sealing gaskets and flanges PN 10

as well as flanged fittings with flanges as per DIN EN 1092-2, PN 10, machined and drilled ready for use, but without flange connection.

Flanged and double flanged pipes cannot be cut.

Fittings are closed in accordance with the packing guideline FGR Standard 74.

linings and Coatings:Cement mortar: inside cement mortar lining, outside bituminous coating

Epoxy: inside and outside powder epoxy coating

Enamel: inside enamel, outside bituminous coating

etec enamel: inside and outside enamel

Surcharges:Flanged pipes and fittings with flanges PN 16, DN 200 up to DN 300 plus 10%, from DN 350 up plus 15%.

Flanged pipes and fittings with flanges PN 25/40, DN 65 and DN 100 up to DN 1200 on request.

Delivery is on principle ex works, excluding packing.

For orders below 250 EUR we will invoice a surcharge of 10%.

This price list contains only part of our delivery programme. For any fittings and valves that are not contained in this price list please ask for prices.

Custom-made items are generally excluded from cancellation and return of goods.

For the rest the General Delivery and Payment Terms are applied.

The prices of fittings with cement mortar/bituminous coating or a complete bituminous coating are identical to those of fittings with enamel/bituminous coating.

Our products bear the DVGW quality mark.

We manufacture in general according to DIN EN 545/ISO 2531 series A, DIN 28650 or factory standard.

Fittings with push-in sockets for PVC pipes are manufactured as per DIN EN 12842 or factory standard.

We are a member of the European Association for Ductile Iron Pipe Systems EADIPS® (Fachgemeinschaft Guss-Rohrsysteme FGR® e.V.)

We are a member of the German GSK Quality Association for Heavy Duty Corrosion Protection of Powder Coated Valves and Fittings (GSK Gütegemeinschaft Schwerer Korrosionsschutz von Armaturen und Formstücken durch Pulverbeshcichtung e.V.)

All enamelled valves and fittings are refined in accordance with the gui-delines of the German Enamellers‘ Association DEV (Deutscher Emailverband e.V.)

2014 price list

– 3 –

Contents

Notes / Pricing 2

1. Resilient-Seated Gate Valves

For Water

1.1 gate valve type 4004, face-to-face dimension series 15, enamel finish 8

1.2 gate valve type 4004/type 4014, face-to-face dimension series 15, epoxy finish 9

1.3 gate valve type 2004, face-to-face dimension series 14, enamel finish 10

1.4 gate valve type 2004, face-to-face dimension series 14, epoxy finish 11

1.5 Plug-in socket gate valve type 4004 with double-sided Novo socket 12

1.6 Spigot socket gate valve type 4004 with Novo socket and spigot 13

1.7 gate valve type 4004 with Pe 100 studs for welding, enamel finish 14

1.8 Replacement and repair valve type 4004/type 2004, enamel finish 15

For Gas



1.11 gate valve type 4004 with Pe 100 studs for welding, epoxy finish 18

1.12 gate valve type 3004 with welding studs for steel pipes 19

1.13 Gate valve type 4004 with blow-off pipes and Pe 100 studs for welding 20

1.14 gate valve type 3004 with blow-off pipes and steel pipe ends 21

1.15 gate valve type 3004 with blow-off pipes and Pe ends 22

For Biogas



1.18 gate valve type 4004 with Pe 100 studs for welding, epoxy finish 25

For Waste Water

1.19 Waste water valve type 4004, face-to-face dimension series 15, enamel finish 26

1.20 Waste water valve type 4004, face-to-face dimension series 15, epoxy finish 27

1.21 Waste water valve type 2004, face-to-face dimension series 14, enamel finish 28

1.22 Waste water valve type 2004, face-to-face dimension series 14, epoxy finish 29

2. Service Connection Valves

2.1 Tapping valve TOP 32

2.2 Tapping clamp fig. 88, clapping band made of stainless steel 33

2.3 Service connection valve type 1004, enamel finish 34


2014 price list

– 4 –

2.4 Service connection valve type 1004, epoxy finish 35

2.5 Service connection valve type 1004 with studs for welding, enamel finish 36

2.6 Service connection valve type 1004 with studs for welding, epoxy finish 37

3. Hydrants

3.1 Underground hydrant type 304 40

3.2 Underground hydrant type 305 with dual shut-off 41

3.3 Underground hydrant type 304 S 42

3.4 Pillar hydrant type 494 with additional shut-off 43

3.5 Pillar hydrant type 495 with additional shut-off 44

3.6 Underground hydrant vd 45

3.7 Hydrant accessories 46

4. Butterfly Valves

4.1 Butterfly valve type 4510/type 451, enamel finish 48

4.2 Plug-in socket butterfly valve with double-sided Novo socket 49

4.1 düker butterfly valve long body type 4510/type 451 with bypass, enamel finish 50

5. Novo Plug-in System

5.1 Novo fittings (M, MMN / MMNR, B, Mi, iT, S, U) 53 – 59

5.2 Pe adapter piece for Novo sockets 60

5.3 Thrust-resisting joint for cast and steel pipes – NOvO-SiT® 61

5.4 Thrust-resisting joint for Pe pipes – NOvO-grip® III 62

5.5 laying equipment v 300 d 63

5.6 dismantling equipment for plug-in socket connections – NOvO-SiT® and NOvO-grip® 64

6. Accessories

6.1 Flap valves fig. 125 (flap gate) 66

6.2 Cast iron hand wheel for gate valves, operating key 67

6.3 Telescope stem extension set for butterfly valves 68

6.4 Rigid stem extension set 69

6.5 Telescope stem extension set gW 336, coupling adapter set 70

6.6 definition pipe covering 71


2014 price list

– 5 –

7. Pressure Pipe Fittings · Flanged Pipes · Thrust-Resistant Joints

a Single socket tees with spigot and flanged branch 74

B Single socket tees with spigot and socket branch 74

e Flanged sockets 74

eN Flanged socket duckfoot bends 74

eQ Flanged socket bends 90° 75

eU Flanged sockets 75

F Flanged spigots 75 – 76

FF double flanged pipes 76 – 80

FFK double flanged bends 11°– 45° 81 – 82

FFR double flanged tapers concentric 83

FFRe double flanged tapers excentric 84

MK Single socket bends 11°– 45° 84 – 85

MMa double socket tees with flanged branch 86 – 88

MMB all socket tees 88 – 90

MMK double socket bends 11°– 45° 90 – 92

MMQ double socket bends 90° 93

MMR double socket tapers 93 – 94

MQ Single socket bends 90° 94

N double flanged duckfoot bends 90° 95

P Plugs 95

PX Screw plugs with threaded hole 95

Q double flanged bends 90° 96

T all flanged tees 96 – 98

TT all flanged cross tees 98

U Collars 98

X Blank flanges 99

Transition flange 4-/8 holes 99

Flanged bellmouths 99

Screwed socket connection with düker SMU thrust-resistant joint 100

Screwed socket connection with düker SPeZial thrust-resistant joint 100

TYTON SiT PlUS®, including marking ring ePdM 100


2014 price list

– 6 –

8. Pressure Pipe Fittings with Novo Socket

eN Flanged socket duckfoot bends 102

eU Flanged sockets 102

MK Single socket bends 11° – 45° 102 – 103

MMa double socket tees with flanged branch 103 – 104

MMB all socket tees 104 – 105

MMK double socket bends 11° – 45° 106 – 107

MMQ double socket bends 90° 107

MMR double socket tapers 107 – 108

MQ Single socket bends 90° 108

NOvO-SiT® Schubsicherung 108

9. Pressure Pipe Fittings for Plastic Pipes

e-KS Flanged sockets 110

eN-KS Flanged socket duckfoot bends 110

F-KS Flanged spigots 110

MMa-KS double socket tees with flanged branch 110 – 111

MMB-KS all socket tees 111 – 112

MMi-KS double sockets with internal threaded branch 112

MMR-KS double socket tapers 112

10. Pipe Fittings for Sewage Pipelines

SM drilling saddle piece for cast iron, steel or fibre cement pipe 114

Si drilling saddle piece for cast iron, steel or fibre cement pipe 114

MM TYTON® coupling with TYTON® NBR seals 115

iCi Spigot end branch 115

MMi double socket branch with TYTON® sockets 115

MMM double socket branch with TYTON® sockets 115

Rvd Pipe sealing cap complete 116

Sa Manhole connection piece 116

double flanged hatchbox 116

MMC double socket pieces with 45° socket branch 116

General terms and conditions of delivery and payment 118


Düker valves

2014 price list

– 7 –

1. G

ate

Valv

es3.

Hyd

rant

s4.

But

terfl

y Va

lves

5. N

ovo

Plug

-in

Syst

em6.

Acc

esso

ries

7. P

ress

ure

Pipe

Fit

tings

Fl

ange

d Pr

essu

re P

ipes

Th

rust

-Res

ista

nt J

oint

s8.

Pre

ssur

e Pi

pe F

ittin

gs

wit

h N

ovo

Sock

et9.

Pre

ssur

e Pi

pe F

ittin

gs

for P

last

ic P

ipel

ines

10. P

ipe

Fitt

ings

for

Sew

age

Pipe

lines

2. S

ervi

ce C

onne

ctio

n Va

lves1. Resilient-Seated Gate Valves

Düker valves– 8 –

2014 price list

düker gate valve Type 4004PN 10/16, diN eN 1074 part 1+2, gW 336 Face-to-face dimension diN eN 558-1 basic series 15 düker etec enamel finish for water

Resilient-seated gate valve, flanges according to DIN EN 1092-2, inside and outside etec enamel according to the DEV-guidelines for class III soils, DIN 51178, edge protec-tion for bonnet and body, connecting screws A2, countersunk and sealed, media-free stem bearing, rubberized wedge, EPDM gaskets and plastic parts according to KTW recom-mendation and DVGW W 270, DVGW tested and registered.

Material• Body, bonnet and wedge – EN-GJS-500-7 (JS 1050)• Stem – X20 Cr13• Stem nut and clamping piece – special brass• Obturator – entirely vulcanized (elastomer – EPDM) Surface protection• inside and outside Düker etec enamel according to DIN 51178,

DEV guideline class III soils

Nominal diameter DN

Nominal pressure

PN

Test pressure in bar (water)

Body Seat

40 – 300 16 24 17.6

200 – 300 10 15 11

Field of application: Drinking water up to +60 °C

Operation:

• Hand wheel • Stem extension set • Electrical actuator

upon request

Item no. DN PN Price in €*

569135 40 16 166,70

569136 50 16 170,80

569137 65 16 241,80

567656 80 16 241,80

567614 100 16 267,50

569628 125 16 461,00

567690 150 16 461,00

567770 200 10 812,90

568088 200 16 852,00

569146 250 10 1.294,50

570750 250 16 1.360,30

568170 300 10 1.784,30

569945 300 16 1.873,80

* without operating element

Düker valves

2014 price list

– 9 –

1. G

ate

Valv

es3.

Hyd

rant

s4.

But

terfl

y Va

lves

5. N

ovo

Plug

-in

Syst

em6.

Acc

esso

ries

7. P

ress

ure

Pipe

Fit

tings

Fl

ange

d Pr

essu

re P

ipes

Th

rust

-Res

ista

nt J

oint

s8.

Pre

ssur

e Pi

pe F

ittin

gs

wit

h N

ovo

Sock

et9.

Pre

ssur

e Pi

pe F

ittin

gs

for P

last

ic P

ipel

ines

10. P

ipe

Fitt

ings

for

Sew

age

Pipe

lines

2. S

ervi

ce C

onne

ctio

n Va

lves

Material • Bonnet nut and closing nut – special brass

Gate valve type 4004 Gate valve type 4014


573291 80 16 223,30

573248 100 16 248,00

573296 125 16 428,10

573301 150 16 428,10

573306 200 10 750,10

573308 200 16 786,20

Type 4004

Type 4014

düker gate valve Type 4004/Type 4014PN 10/16, diN eN 1074 part 1+2, gW 336 Face-to-face dimension diN eN 558-1 basic series 15 düker epoxy finish for water

Resilient-seated gate valve, flanges according to DIN EN 1092-2, inside and outside epoxy blue RAL 5005 according to GSK, edge protection for bonnet and body, connecting screws A2, countersunk and sealed, media-free stem bearing, rubberized wedge, EPDM gaskets and plastic parts according to KTW recommendation and DVGW W 270, DVGW tested and registered.

Material • Body, bonnet and wedge – EN-GJS-500-7 (JS 1050)• Stem – X20 Cr13• Stem nut and clamping piece – special brass• Obturator – entirely vulcanized (elastomer – EPDM)

Surface protection• inside and outside epoxy blue RAL 5005 according to the GSK guidelines

Nominal diameter

DN

Nominal pressure

PN


Body Seat

40 – 300 16 24 17.6

200 – 300 10 15 11


Operation:


upon request


769104 40 16 155,40

569275 50 16 158,50

569823 65 16 223,30

571171 80 16 223,30

571173 100 16 248,00

571633 125 16 428,10

571175 150 16 428,10

571177 200 10 750,10

573197 200 16 786,20

569718 250 10 1.196,70

571178 250 16 1.257,40

569918 300 10 1.649,50

571179 300 16 1.732,80


Düker valves

2014 price list

– 10 –

düker gate valve Type 2004PN 10/16, diN eN 1074 part 1+2, gW 336 Face-to-face dimension diN eN 558-1 basic series 14 düker etec enamel finish for water

Resilient-seated gate valve, flanges according to DIN EN 1092-2, inside and outside etec enamel according to the DEV-guidelines for class III soils, DIN 51178, edge protection for bonnet and body, connecting screws A2, countersunk and sealed, media-free stem bearing, rubberized wedge, EPDM gaskets and plastic parts accor-ding to KTW recommendation and DVGW W 270, DVGW tested and registered.

Material• Body, bonnet and wedge – EN-GJS-500-7 (JS 1050)• Stem – X20 Cr13• Stem nut and clamping piece – special brass• Obturator – entirely vulcanized (elastomer – EPDM)

Surface protection• inside and outside Düker etec enamel according to DIN 51178,


Nominal diameter

DN

Nominal pressure

PN


Body Seat

40 – 300 16 24 17.6

200 – 300 10 15 11


Operation:


upon request


569110 40 16 162,60

569111 50 16 165,70

569184 65 16 234,60

567839 80 16 234,60

567843 100 16 262,40

567847 125 16 454,80

567851 150 16 454,80

567855 200 10 784,10

568173 200 16 822,20

569188 250 10 1.251,30

569203 250 16 1.312,00

569190 300 10 1.724,60

569410 300 16 1.810,00


Düker valves

2014 price list

– 11 –

1. G

ate

Valv

es3.

Hyd

rant

s4.

But

terfl

y Va

lves

5. N

ovo

Plug

-in

Syst

em6.

Acc

esso

ries

7. P

ress

ure

Pipe

Fit

tings

Fl

ange

d Pr

essu

re P

ipes

Th

rust

-Res

ista

nt J

oint

s8.

Pre

ssur

e Pi

pe F

ittin

gs

wit

h N

ovo

Sock

et9.

Pre

ssur

e Pi

pe F

ittin

gs

for P

last

ic P

ipel

ines

10. P

ipe

Fitt

ings

for

Sew

age

Pipe

lines

2. S

ervi

ce C

onne

ctio

n Va

lves

Resilient-seated gate valve, flanges according to DIN EN 1092-2, inside and outside epoxy blue RAL 5005 according to GSK, edge protection for bonnet and body, connecting screws A2, countersunk and sealed, media-free stem bearing, rubberized wedge, EPDM gaskets and plastic parts according to KTW recommendation and DVGW W 270, DVGW tested and registered.


Surface protection • inside and outside epoxy blue RAL 5005 according to the GSK guidelines

düker gate valve Type 2004PN 10/16, diN eN 1074 part 1+2, gW 336 Face-to-face dimension diN eN 558-1 basic series 14 düker epoxy finish for water


570158 40 16 151,30

569534 50 16 154,40

570599 65 16 216,10

570941 80 16 216,10

570944 100 16 244,90

571053 125 16 417,80

570947 150 16 417,80

571056 200 10 723,40

571070 200 16 758,40

570739 250 10 1.157,60

571565 250 16 1.212,20

569543 300 10 1.597,00

571238 300 16 1.677,30

Nominal diameter

DN

Nominal pressure

PN


Body Seat

40 – 300 16 24 17.6

200 – 300 10 15 11


Operation:


upon request


Düker valves

2014 price list

– 12 –– 12 –

düker Plug-in Socket gate valve Novo Type 4004PN 16, diN eN 1074 part 1 + 2, gW 336Face-to-face dimension diN eN 558 basic series 13düker etec enamel finish for water

Resilient-seated gate valve with double-chamber socket for the tensile strength ensu-ring connection to cast, steel and PE pipes, two-sided plug-in socket according to DIN 28603 TYTON® with pre-chamber, etec enamel inside and outside according to the DEV guidelines for class III soils, DIN 51178, edge protection for bonnet and body, connecting screws A2, countersunk and sealed, media-free stem bearing, rubberized wedge, EPDM gaskets and plastic parts in accordance with KTW recommendation and DVGW W 270, DVGW tested and registered.

Material• Body, bonnet and obturator – EN-GJS-500-7 (JS 1050)• Stem – X20Cr13• Stem nut and clamping piece – special brass• Obturator – entirely vulcanized (elastomer – EPDM)

Surface protection• Inside and outside Düker etec enamel according to DIN 51178,


Operation:

• Hand wheel

• Stem extension set

• Electrical actuator (special design) upon request

Item no. DN Price in €*

567899 80 254,20

567903 100 280,90

570607 125 483,60

567911 150 483,60

567915 200 895,20

568174 250 1.428,30

568182 300 1.967,40

Nominal diameter

DN

Nominal pressure

PN


Body Seat

80 – 300 16 24 17.6



listed prices do not include the connections.

Düker valves

2014 price list

– 13 –

1. G

ate

Valv

es3.

Hyd

rant

s4.

But

terfl

y Va

lves

5. N

ovo

Plug

-in

Syst

em6.

Acc

esso

ries

7. P

ress

ure

Pipe

Fit

tings

Fl

ange

d Pr

essu

re P

ipes

Th

rust

-Res

ista

nt J

oint

s8.

Pre

ssur

e Pi

pe F

ittin

gs

wit

h N

ovo

Sock

et9.

Pre

ssur

e Pi

pe F

ittin

gs

for P

last

ic P

ipel

ines

10. P

ipe

Fitt

ings

for

Sew

age

Pipe

lines

2. S

ervi

ce C

onne

ctio

n Va

lves

Resilient-seated gate valve with double-chamber socket for tensile strength ensuring connection to cast steel and PE pipes, plug-in socket according to DIN EN 28603 TYTON® with pre-chamber, spigot according to 545, inside and outside etec enamel according to the DEV guideline for class III soil. DIN 51178 edge protection for bonnet and body, connecting screws A2, countersunk and sealed, media-free stem bearing, rubberized wedge, EPDM gaskets and plastic parts in accordance with KTW recom-mendation and DVGW W 270, DVGW tested and registered.

Material• Body, bonnet and wedge – EN-GJS-500-7 (JS 1050)• Stem – X20Cr13• Stem nut and clamping piece – special brass• Obturator – entirely vulcanized (elastomer – EPDM)

Surface protection• Inside and outside Düker etec enamel according to DIN 51178,


düker Spigot Socket gate valve Novo Type 4004PN 16, diN eN 1074 part 1 + 2, gW 336Face-to-face dimension diN eN 558 basic series 13düker etec enamel finish for water

Operation:

• Hand wheel



Item no. DN Price in €*

567919 80 254,20

567923 100 280,90

569643 125 483,60

567931 150 483,60

567935 200 895,20

568186 250 1.428,30

569171 300 1.967,40

Nominal diameter

DN

Nominal pressure

PN


Body Seat

80 – 300 16 24 17.6




Düker valves

2014 price list

– 14 –

düker gate valve Type 4004PN 10/16, diN eN 1074 part 1+2, gW 336 with studs for welding on both sides Pe 100 Face-to-face dimension diN eN 558-1 basic series 13 düker etec enamel finish for water

Resilient-seated gate valve with PE-HD connections according to DVGW VP 600 with connecting dimensions according to DIN 8074/8075, inside and outside etec enamel according to the DEV-guidelines for class III soils, DIN 51178, edge protection for bonnet and body, connecting screws A2, countersunk and sealed, media free stem bearing, rubberized wedge, EPDM gaskets and plastic parts according to KTW recommendation and DVGW W 270, DVGW tested and registered.


Surface protection • inside and outside Düker etec enamel according to DIN 51178,


Pipes DIN 8074, inspection report Engler-Bunte-Institute regarding connection technology on the basis of DVGW-VP-600, melting index group MFI 005 and 010, according to the guidelines of the DVGW publication G 477 and bulletin DVS 2207


SDR 11

Item no. DN d Wall thickness Price in €*

571193 80 90 8.2 429,10

570280 100 110 10 521,70

570780 100 125 11.4 625,60

768968 125 140 12.8 880,80

570980 150 160 14.6 971,40

571542 150 180 16.4 1.040,30

768972 200 200 18.2 1.757,50

571328 200 225 20.5 1.757,50

SDR 17

Item no. DN d Wall thickness Price in €*

571243 80 90 5.4 429,10

571206 100 110 6.6 521,70

571240 100 125 7.4 625,60

768964 125 140 8.3 880,80

571207 150 160 9.5 971,40

571248 150 180 10.7 1.040,30

768974 200 200 11.9 1.757,50

571319 200 225 13.4 1.757,50

Nominal diameter

DN

Nominal pressure PN

SDR Test pressure in bar (water)

Body Seat

80 – 200 10 17 15 11

80 – 200 16 11 24 17.6

Upon request:• inside and outside Epoxy

Operation:

• Hand wheel



Düker valves

2014 price list

– 15 –

1. G

ate

Valv

es3.

Hyd

rant

s4.

But

terfl

y Va

lves

5. N

ovo

Plug

-in

Syst

em6.

Acc

esso

ries

7. P

ress

ure

Pipe

Fit

tings

Fl

ange

d Pr

essu

re P

ipes

Th

rust

-Res

ista

nt J

oint

s8.

Pre

ssur

e Pi

pe F

ittin

gs

wit

h N

ovo

Sock

et9.

Pre

ssur

e Pi

pe F

ittin

gs

for P

last

ic P

ipel

ines

10. P

ipe

Fitt

ings

for

Sew

age

Pipe

lines

2. S

ervi

ce C

onne

ctio

n Va

lves


572853 80 16 519,60

572854 100 16 625,60

572855 125 16 840,70

572856 150 16 1.056,80

572857 200 10 1.607,30

572858 200 16 1.607,30

Operation:

• Hand wheel



Replacement and repair valve type 4004 Replacement and repair valve type 2004

Type 4004

Type 2004

düker Replacement and Repair valve Type 4004/Type 2004PN 10/16, diN eN 1074 part 1+2, gW 336 Type 4004: face-to-face dimension diN eN 558-1 basic series 15; Type 2004: face-to-face length diN eN 558-1 basic series 13 düker etec enamel finish for water

Resilient-seated gate valve, flanges according to DIN EN 1092-2, etec enamel inside and outside according to the DEV guideline for class III soil, DIN 51178, restraint loose flanges with integrated gasket securing tensile strength, epoxy coating black RAL 9005 according to the GSK guidelines, edge protection for bonnet and body, connecting screws A2, countersunk and sealed, media-free stem bearing, rubberized wedge, EPDM gaskets and plastic parts in accordance with KTW recommendation and DVGW W 270, DVGW tested and registered.

Material• Body, bonnet and wedge – EN-GJS-500-7 (JS 1050)• Stem – X20Cr13 • Stem nut and clamping piece – special brass• Obturator – entirely vulcanized (elastomer – EPDM) Surface protection • Body / bonnet Düker etec enamel inside and outside according to

DIN 51178, DEV guideline class III soils• Loose flanges: epoxy black RAL 9005 inside and outside according to the

GSK guidelines

Nominal diameter

DN

Nominal pressure

PN


Body Seat

80 – 200 16 24.0 17.6

200 10 15.0 11.0



572329 80 16 519,60

572330 100 16 625,60

572331 125 16 840,70

572332 150 16 1.056,80

572333 200 10 1.607,30

572334 200 16 1.607,30


Düker valves

2014 price list

– 16 –

düker gate valve Type 4004PN 0.5/16, diN eN 13774, gW 336 Face-to-face dimension diN eN 558-1 basic series 15 düker epoxy finish for gas

Resilient-seated gate valve, flanges according to DIN EN 1092-2, inside and outside epoxy yellow RAL 1023 according to GSK, edge protection for bonnet and body, connecting screws A2, countersunk and sealed, media-free stem bearing, rubberized wedge and gaskets NBR, DVGW tested and registered.

Material• Body, bonnet and wedge – EN-GJS-500-7 (JS 1050)• Stem – X20Cr13• Stem nut and clamping piece – special brass• Obturator – entirely vulcanized (elastomer – NBR)

Surface protection• inside and outside epoxy yellow RAL 1023 according to the GSK guidelines

Upon request:

• inside and outside enamel

• with pressure test PG 2

Operation:

• Hand wheel• Stem extension set

Nominal diameter DN

Nominal pressure PN

Test pressure in bar

Body Seat PG 1 Seat PG 3

4 – 16 bar

Water Air Air

40 – 300 0.5 / 16 24 0.5 0.5 a. 17.6

Field of application: All gases according to DVGW publication G 260/I

Item no. DN PN PG Price in €*

571709 40 16 PG 3 272,70

571037 50 16 PG 3 275,80

572015 65 16 PG 3 339,60

568078 80 16 PG 3 339,60

570239 100 16 PG 3 377,60

571670 125 16 PG 3 559,80

568081 150 16 PG 3 559,80

568082 200 10 PG 3 873,60

571034 200 16 PG 3 915,80

571487 250 10 PG 3 1.425,20

765927 250 16 PG 3 1.496,20

571106 300 10 PG 3 1.879,00

572248 300 16 PG 3 1.970,50


571219 40 16 PG 1 240,80

571220 50 16 PG 1 244,90

571222 65 16 PG 1 304,60

769084 80 16 PG 1 304,60

568989 100 16 PG 1 341,60

769005 125 16 PG 1 524,80

769085 150 16 PG 1 524,80

769086 200 10 PG 1 840,70

769087 200 16 PG 1 882,90

769088 250 10 PG 1 1.380,90

769089 250 16 PG 1 1.451,90

769090 300 10 PG 1 1.833,70

769092 300 16 PG 1 1.927,30

The prices for the gas valves include the inspection certificate 3.1 according to DIN EN 10204 and valve marking.


Düker valves

2014 price list

– 17 –

1. G

ate

Valv

es3.

Hyd

rant

s4.

But

terfl

y Va

lves

5. N

ovo

Plug

-in

Syst

em6.

Acc

esso

ries

7. P

ress

ure

Pipe

Fit

tings

Fl

ange

d Pr

essu

re P

ipes

Th

rust

-Res

ista

nt J

oint

s8.

Pre

ssur

e Pi

pe F

ittin

gs

wit

h N

ovo

Sock

et9.

Pre

ssur

e Pi

pe F

ittin

gs

for P

last

ic P

ipel

ines

10. P

ipe

Fitt

ings

for

Sew

age

Pipe

lines

2. S

ervi

ce C

onne

ctio

n Va

lvesdüker gate valve Type 2004

PN 0,5 / 16, diN eN 13774, gW 336 Face-to-face dimension diN eN 558-1 basic series 14 düker epoxy finish for gas

Resilient-seated gate valve, flanges according to DIN EN 1092-2, inside and outside epoxy yellow RAL 1023 according to GSK, edge protection for bonnet and body, connecting screws A2, countersunk and sealed, media-free stem bearing, rubberized wedge and gaskets NBR, DVGW tested and registered. Material • Body, bonnet and wedge – EN-GJS-500-7 (JS 1050)• Stem – X20Cr13 • Stem nut and clamping piece – special brass• Obturator – entirely vulcanized (elastomer – NBR) Surface protection• inside and outside epoxy yellow RAL 1023 according to the GSK guidelines


769006 40 16 PG 3 265,50

571047 50 16 PG 3 271,70

571679 65 16 PG 3 328,30

571322 80 16 PG 3 328,30

571131 100 16 PG 3 363,20

769011 125 16 PG 3 540,20

571072 150 16 PG 3 540,20

571073 200 10 PG 3 843,80

571048 200 16 PG 3 889,10

571891 250 10 PG 3 1.379,90

571590 250 16 PG 3 1.446,80

572321 300 10 PG 3 1.836,80

571887 300 16 PG 3 1.906,70


769022 40 16 PG 1 232,60

769024 50 16 PG 1 239,80

769025 65 16 PG 1 294,30

769027 80 16 PG 1 294,30

769028 100 16 PG 1 331,30

769029 125 16 PG 1 508,30

769093 150 16 PG 1 508,30

769030 200 10 PG 1 811,90

769033 200 16 PG 1 853,00

769036 250 10 PG 1 1.335,60

769037 250 16 PG 1 1.404,60

769039 300 10 PG 1 1.817,20

769040 300 16 PG 1 1.862,50


Nominal diameter

DN

Nominal pressure PN



4 – 16 bar

Water Air Air

40 – 300 0.5 / 16 24 0.5 0.5 a. 17.6

Upon request:


• with pressure test PG 2

Operation:

• Hand wheel




Düker valves

2014 price list

– 18 –

SDR 11

Item no.

PN 4 PN 10 DN d Wall thickness Price in €*

568828 572250 80 90 8.2 523,80

568830 572355 100 110 10 576,20

568832 571970 100 125 11.4 690,50

769041 789115 125 140 12.8 971,40

568850 571715 150 160 14.6 1.017,70

568835 789116 150 180 16.4 1.149,40

569116 789119 200 200 18.2 1.822,40

569118 571660 200 225 20.5 1.822,40

SDR 17

Item no.

PN 4 DN d Wall thickness Price in €*

568829 80 90 5.4 523,80

568831 100 110 6.6 576,20

568833 100 125 7.4 690,50

569113 125 140 8.3 971,40

568834 150 160 9.5 1.017,70

569115 150 180 10.7 1.149,40

569117 200 200 11.9 1.822,40

568836 200 225 13.4 1.822,40

düker gate valve Type 4004PN 4, diN eN 13774, gW 336 with studs for welding on both sides Pe 100 Face-to-face dimension diN eN 558-1 basic series 13 düker epoxy finish for gas

Resilient-seated gate valve with PE-HD connections according to DVGW VP 600 with connecting dimensions according to DIN 8074/8075, epoxy yellow RAL 1023 inside and outside according to GSK, edge protection for bonnet and body, connecting screws A2, countersunk and sealed, media free stem bearing, rubberized wedge, gaskets NBR, DVGW tested and registered.

Material• Body, bonnet and wedge – EN-GJS-500-7 (JS 1050)• Stem – X20Cr13• Stem nut and clamping piece – special brass• Obturator – entirely vulcanized (elastomer – NBR) Surface protection• inside and outside epoxy yellow RAL 1023 according to the GSK guidelines

Upon request:


Operation:

• Hand wheel



Nominal diameter DN

Nominal pressure PN

SDR Test pressure in bar

Body Seat PG 3

0 – 4 bar

Water Air

80 – 200 4 11 / 17 24 0.5 a. 6

80 – 200 10 11 24 0.5 a. 11


Pipes DIN 8074, inspection report Engler-Bunte-Institute regarding connection technology on the basis of DVGW-VP-600, melting index group MFI 005 and 010, according to the guidelines of the DVGW publication G 477 and bulletin DVS 2207


Düker valves

2014 price list

– 19 –

1. G

ate

Valv

es3.

Hyd

rant

s4.

But

terfl

y Va

lves

5. N

ovo

Plug

-in

Syst

em6.

Acc

esso

ries

7. P

ress

ure

Pipe

Fit

tings

Fl

ange

d Pr

essu

re P

ipes

Th

rust

-Res

ista

nt J

oint

s8.

Pre

ssur

e Pi

pe F

ittin

gs

wit

h N

ovo

Sock

et9.

Pre

ssur

e Pi

pe F

ittin

gs

for P

last

ic P

ipel

ines

10. P

ipe

Fitt

ings

for

Sew

age

Pipe

lines

2. S

ervi

ce C

onne

ctio

n Va


PN 16, diN eN 13774, gW 336 with studs for welding on both ends according to diN eN 12627 for steel pipes Face-to-face dimension diN eN 12982 basic series 15 Polyurethane finish for gas

Resilient-seated gate valve with studs for welding according to DIN EN 12627, welding gap as per DIN 29692 number 1.3.3, inside Düker enamel, outside Polyurethane, connecting screws A2, countersunk and sealed, media-free stem bearing, rubberized wedge, gaskets NBR, DVGW tested and registered.

Material• Body EN-GJS-400-18 (JS 1049)• Studs for welding ST 35.8 / P235GH• Bonnet, obturator EN-GJS-500-7 (JS -1050)• Stem – X20Cr13• Stem nut and clamping piece – special brass• Obturator – entirely vulcanized (elastomer – NBR)

Surface protection• inside blue Düker enamel• Outside polyurethane according to DIN 30677 T 2, 15 KV-tested


Nominal diameter

DN

Nominal pressure

PN


Body Seat PG 3

4 – 16 bar

Water Air

50 – 300 16 24 0.5 a. 17.6

Upon request:

• inside and outside enamel • inside and outside epoxy yellow RAL 1023

Operation:

• Hand wheel • Stem extension set

Item no. DN PN Outside pipe diameter

mm

Price in €*

569307 50 16 60.3 887,00

572609 80 16 88.9 1.138,10

572235 100 16 114.3 1.223,50

572735 150 16 168.3 1.835,70

572736 200 16 219.1 2.702,20

573068 250 16 273.1 5.345,70

569682 300 16 323.9 5.345,70



Düker valves

2014 price list

– 20 –

düker gate valve Type 4004PN 4, diN eN 13774, gW 336with blow-off pipes and studs for welding on both sides Pe 100Face-to-face dimension diN eN 558-1 basic series 13düker epoxy finish for gas

Resilient-seated gate valve with PE-HD connections according to DVGW VP 600 withconnection dimensions according to DIN 8074/8075, epoxy yellow RAL 1023 insideand outside according to GSK, edge protection for bonnet and body, connecting screws A2, countersunk and sealed, medium-free stem bearing, rubberized wedge, gasketsNBR, DVGW tested and registered.

Werkstoffe• Body EN-GJS-400-18 • Bonnet and wegde – EN-GJS-500-7• Stem – X30Cr13• Stem nut and clamping piece - special brass• Obturator - entirely vulcanized (elastomer - NBR) Surface protection• inside and outside epoxy yellow RAL 1023 according to the GSK guidlines

SDR 11Wall

thicknessItem no. DN d Price in €*

780964 80 90 8.2 1.744,20

573445 100 110 10 1.858,40

780963 100 125 11.4 2.032,30

782571 125 140 12.8 3.084,90

782573 150 160 14.6 3.348,40

782572 150 180 16.4 3.474,90

782574 200 200 18.2 3.892,70

780962 200 225 20.5 3.892,70

SDR 17Wall


572796 80 90 5.4 1.744,20

572797 100 110 6.6 1.858,40

782579 100 125 7.4 2.032,30

782580 125 140 8.3 3.084,90

572798 150 160 9.5 3.348,40

782584 150 180 10.7 3.474,90

782585 200 200 11.9 3.892,70

572799 200 225 13.4 3.892,70

The prices for gas valves include the inspection certificate 3.1 according to DIN EN 10204 and the valve marking

Operation:



Nominal diameter DN

Nominal pressure PN



4 – 16 bar

Water Air Air

40 – 300 0.5 / 16 24 0.5 0.5 a. 17.6


Düker valves

2014 price list

– 21 –

1. G

ate

Valv

es3.

Hyd

rant

s4.

But

terfl

y Va

lves

5. N

ovo

Plug

-in

Syst

em6.

Acc

esso

ries

7. P

ress

ure

Pipe

Fit

tings

Fl

ange

d Pr

essu

re P

ipes

Th

rust

-Res

ista

nt J

oint

s8.

Pre

ssur

e Pi

pe F

ittin

gs

wit

h N

ovo

Sock

et9.

Pre

ssur

e Pi

pe F

ittin

gs

for P

last

ic P

ipel

ines

10. P

ipe

Fitt

ings

for

Sew

age

Pipe

lines

2. S

ervi

ce C

onne

ctio

n Va


PN 4, diN eN 13774 with blow-off pipes and studs for welding on both ends according to diN eN 12627 for steel pipes Polyurethane finish for gas

Resilient-seated gate valve with studs for welding according to DIN EN 12627, welding gap as per DIN 29692 number 1.3.3, inside Düker enamel, outside polyurethane, connecting screws A2, countersunk and sealed, media free stem bearing, rubberized wedge, gaskets NBR, DVGW tested and registered. The welding seams are tested according to the AD bulletin HP5 / 3 and the weld-on ends according to DIN EN 12266.

Material• Body EN-GJS-400-18 (JS 1049)• Studs for welding ST 35.8 / P235GH• Bonnet, obturator EN-GJS-500-7 (JS -1050)• Stem – X20Cr13• Stem nut and clamping piece – special brass• Obturator – entirely vulcanized (elastomer – NBR)

Surface protection• inside blue Düker enamel• Outside polyurethane according to DIN 30677 T 2. 15 KV-tested


Nominal diameter

DN

Nominal pressure

PN


Body Seat PG 3

0 – 4 bar

Water Air

80 – 300 4 24 0.5 a. 6

Item no. DN Outside pipe diameter

mm

PG Price in €*

571427 80 88.9 PG3 upon request

571428 100 114.3 PG3 upon request

571429 150 168.3 PG3 upon request

571430 200 219.1 PG3 upon request

571432 300 323.9 PG3 upon request



Düker valves

2014 price list

– 22 –

düker gate valve Type 3004PN 4, diN eN 13774 with blow-off pipes and studs for welding on both ends Pe 100 Polyurethane finish for gas

Resilient-seated gate valve with PE-HD connections according to DVGW VP 600 with connecting dimensions according to DIN 8074/8075, Düker enamel on the inside, polyurethane on the outside, connecting screws A2, countersunk and sealed, media-free stem bearing, rubberized wedge, gaskets NBR, DVGW tested and registered. PE pipe end with double socket welding length. The welding seams are tested according to the AD bulletin HP5 / 3 and the weld-on ends according to DIN EN 12266.

Material• Body EN-GJS-400-18 (JS 1049)• PE 100 stud for welding• Bonnet, obturator EN-GJS-500-7 (JS-1050)• Stem – X20Cr13• stem nut and clamping piece – special brass• Obturator – entirely vulcanized (elastomer – NBR)

Surface protection• inside blue Düker enamel• Outside polyurethane according to DIN 30677 T 2. 15 KV-tested


Nominal diameter

DN

Nominal pressure

PN


Body Seat PG 3

0 – 4 bar

Water Air

100 – 200 4 11 / 17 24 0.5 a. 6

Item no. DN Diameter PG Price in €*

572483 100 110 PG3 upon request






Düker valves

2014 price list

– 23 –

1. G

ate

Valv

es3.

Hyd

rant

s4.

But

terfl

y Va

lves

5. N

ovo

Plug

-in

Syst

em6.

Acc

esso

ries

7. P

ress

ure

Pipe

Fit

tings

Fl

ange

d Pr

essu

re P

ipes

Th

rust

-Res

ista

nt J

oint

s8.

Pre

ssur

e Pi

pe F

ittin

gs

wit

h N

ovo

Sock

et9.

Pre

ssur

e Pi

pe F

ittin

gs

for P

last

ic P

ipel

ines

10. P

ipe

Fitt

ings

for

Sew

age

Pipe

lines

2. S

ervi

ce C

onne

ctio

n Va

lves

Field of application: for a maximum concentration of hydrogen sulphide of 2,000 ppm or 3,076 mg/m3

Medium temperature maximum 50 °C. Before the order we ask you to hand in a medium analysis with details on temperature, humidity and a possible content in solid matter

Test PG3


please inquire in

the factory

50 16 318,00

65 16 366,30

80 16 366,30

100 16 409,50

125 16 616,40

150 16 616,40

200 10 976,50

200 16 1.024,90

250 10 1.587,70

250 16 1.668,00

300 10 2.107,40

300 16 2.212,40

düker gate valve Type 4004 for BiogasPN 10 / 16, diN eN 13774, gW 336 Face-to-face dimension diN eN 558-1 basic series 15 düker epoxy finish

Resilient-seated gate valve, flanges according to DIN EN 1092-2, inside and outside epoxy yellow RAL 1023 according to GSK, edge protection for bonnet and body, connecting screws A2, countersunk and sealed, media-free stem bearing, rubberized wedge and gaskets NBR

Material• Body, bonnet and wedge – EN-GJS-500-7 (JS 1050)• Stem – 1.4571• Stem nut and clamping piece – aluminium-bronze• Obturator – entirely vulcanized (elastomer – NBR) • gaskets NBR


Operation:

• Hand wheel



Nominal diameter

DN

Nominal pressure

PN


Body Seat PG 3

0 – 4 bar

Water Air

50 – 300 4 24 0,5 a. 6



Düker valves

2014 price list

– 24 –

düker gate valve Type 2004 for BiogasPN 10 / 16, diN eN 13774, gW 336 Face-to-face dimension diN eN 558-1 basic series 14 düker epoxy finish


please inquire in

the factory

50 16 313,80

65 16 356,00

80 16 356,00

100 16 396,20

125 16 596,80

150 16 596,80

200 10 948,70

200 16 1.067,10

250 10 1.544,50

250 16 1.620,70

300 10 2.068,30

300 16 2.150,60

Operation:

• Hand wheel





Test PG3

Resilient-seated gate valve, flanges according to DIN EN 1092-2, inside and outside epoxy yellow RAL 1023 according to GSK, edge protection for bonnet and body, connecting screws A2, countersunk and sealed, media-free stem bearing, rubberized wedge and gaskets NBR



Nominal diameter

DN

Nominal pressure

PN


Body Seat PG 3

0 – 4 bar

Water Air

50 – 300 4 24 0,5 a. 6



Düker valves

2014 price list

– 25 –

1. G

ate

Valv

es3.

Hyd

rant

s4.

But

terfl

y Va

lves

5. N

ovo

Plug

-in

Syst

em6.

Acc

esso

ries

7. P

ress

ure

Pipe

Fit

tings

Fl

ange

d Pr

essu

re P

ipes

Th

rust

-Res

ista

nt J

oint

s8.

Pre

ssur

e Pi

pe F

ittin

gs

wit

h N

ovo

Sock

et9.

Pre

ssur

e Pi

pe F

ittin

gs

for P

last

ic P

ipel

ines

10. P

ipe

Fitt

ings

for

Sew

age

Pipe

lines

2. S

ervi

ce C

onne

ctio

n Va

lves



düker gate valve Type 4004 for BiogasPN 4, diN eN 13774, gW 336 with studs for welding on both sides Pe 100 Face-to-face dimension diN eN 558-1 basic series 13 düker epoxy finish

Resilient-seated gate valve with PE-HD connections according to DVGW VP 600 with connecting dimensions according to DIN 8074/8075, epoxy yellow RAL 1023 inside and outside according to GSK, edge protection for bonnet and body, connecting screws A2, countersunk and sealed, media free stem bearing, rubberized wedge, gaskets NBR



Operation:

• Hand wheel


Nominal diameter

DN

Nominal pressure

PN


Body Seat PG 3

0 – 4 bar

Water Air

80 – 200 4 11 / 17 24 0,5 a. 6

Pipes DIN 8074, inspection report Engler-Bunte-Institute regarding connection technology on the basis of DVGW-VP-600, melting index group MFI 005 and 010, according to the guidelines of the DVGW publication G 477 and bulletin DVS 2207.

SDR 11Wall


please inquire in

the factory

80 90 8.2 549,50

100 110 10.0 598,90

100 125 11.4 709,00

125 140 12.7 1.008,40

150 160 14.6 1.052,70

150 180 16.4 1.178,20

200 200 18.2 1.889,20

200 225 20.5 1.889,20

SDR 17Wall


please inquire in

the factory

80 90 5.4 549,50

100 110 6.6 598,90

100 125 7.4 709,00

125 140 8.3 1.008,40

150 160 9.5 1.052,70

150 180 10.7 1.178,20

200 200 11.9 1.889,20

200 225 13.4 1.889,20



Düker valves

2014 price list

– 26 –

düker Waste Water valve Type 4004PN 10/16, gW 336 Face-to-face dimension diN eN 558 basic series 15 epoxy blue finish

Resilient-seated gate valve, flanges according to DIN EN 1092-2, inside and outside epoxy blue RAL 5005 according to GSK, edge protection for bonnet and body, connecting screws A2, countersunk and sealed, media-free stem bearing, rubberized wedge, gaskets NBR.

Material• Body, bonnet and wedge – EN-GJS-500-7 (JS 1050)• Stem – 1.4571• Stem nut and clamping piece – aluminum bronze• Obturator – entirely vulcanized (elastomer – NBR)



769097 50 16 233,60

572431 80 16 291,20

573113 100 16 323,10

573114 125 16 552,60

573115 150 16 552,60

573054 200 10 974,50

769044 200 16 1.014,60

573102 250 10 1.553,80

769094 250 16 1.632,00

769095 300 10 2.142,40

769096 300 16 2.232,90

Nominal diameter

DN

Nominal pressure

PN


Body Seat

50 – 300 16 24 17.6

200 – 300 10 15 11

Field of application: Waste water

Operation:

• Hand wheel




Düker valves

2014 price list

– 27 –

1. G

ate

Valv

es3.

Hyd

rant

s4.

But

terfl

y Va

lves

5. N

ovo

Plug

-in

Syst

em6.

Acc

esso

ries

7. P

ress

ure

Pipe

Fit

tings

Fl

ange

d Pr

essu

re P

ipes

Th

rust

-Res

ista

nt J

oint

s8.

Pre

ssur

e Pi

pe F

ittin

gs

wit

h N

ovo

Sock

et9.

Pre

ssur

e Pi

pe F

ittin

gs

for P

last

ic P

ipel

ines

10. P

ipe

Fitt

ings

for

Sew

age

Pipe

lines

2. S

ervi

ce C

onne

ctio

n Va

lvesdüker Waste Water valve Type 4004

PN 10/16, gW 336 Face-to-face dimension diN eN 558 basic series 15 epoxy blue finish


Material• Body, bonnet and wedge – EN-GJS-500-7 (JS 1050)• Stem – 1.4571• Stem nut and clamping piece – aluminum bronze• Obturator – entirely vulcanized (elastomer – NBR)



572432 50 16 216,10

572436 80 16 268,60

572438 100 16 299,40

572440 125 16 513,50

572442 150 16 513,50

572446 200 10 900,40

768948 200 16 944,60

572448 250 10 1.435,50

769102 250 16 1.508,50

572450 300 10 1.979,80

769103 300 16 2.080,60

Nominal diameter

DN

Nominal pressure

PN


Body Seat

50 – 300 16 24 17.6

200 – 300 10 15 11


Operation:

• Hand wheel




Düker valves

2014 price list

– 28 –

düker Waste Water valve Type 2004PN 10/16, gW 336 Face-to-face dimension diN eN 558 basic series 14 düker enamel finish

Resilient-seated gate valve, flanges according to DIN EN 1092-2, etec enamel inside and outside according to the DEV guideline for class III soil, DIN 51178, edge protec-tion for bonnet and body, connecting screws A2, countersunk and sealed, media-free stem bearing, rubberized wedge, gaskets NBR.

Material • Body, bonnet and wedge – EN-GJS-500-7 (JS 1050)• Stem - 1.4571 • Stem nut and clamping piece – aluminum bronze• Obturator – entirely vulcanized (elastomer – NBR) Surface protection • inside and outside Düker etec enamel according to DIN 51178,




769098 50 16 233,60

573058 80 16 291,20

769045 100 16 323,10

769046 125 16 552,60

769047 150 16 552,60

573112 200 10 974,50

769048 200 16 1.014,60

573101 250 10 1.553,80

769099 250 16 1.632,00

769100 300 10 2.142,40

769101 300 16 2.232,90

Operation:

• Hand wheel



Nominal diameter

DN

Nominal pressure

PN


Body Seat

50 – 300 16 24 17.6

200 – 300 10 15 11


Düker valves

2014 price list

– 29 –

1. G

ate

Valv

es3.

Hyd

rant

s4.

But

terfl

y Va

lves

5. N

ovo

Plug

-in

Syst

em6.

Acc

esso

ries

7. P

ress

ure

Pipe

Fit

tings

Fl

ange

d Pr

essu

re P

ipes

Th

rust

-Res

ista

nt J

oint

s8.

Pre

ssur

e Pi

pe F

ittin

gs

wit

h N

ovo

Sock

et9.

Pre

ssur

e Pi

pe F

ittin

gs

for P

last

ic P

ipel

ines

10. P

ipe

Fitt

ings

for

Sew

age

Pipe

lines

2. S

ervi

ce C

onne

ctio

n Va

lves

– 29 –

düker Waste Water valve Type 2004PN 10/16, gW 336 Face-to-face dimension diN eN 558 basic series 14 epoxy blue finish


Material• Body and wedge – EN-GJS-500-7 (JS 1050)• Stem – 1.4571• Stem nut and clamping piece – aluminum bronze• Obturator – entirely vulcanized (elastomer – NBR) Surface protection • inside and outside epoxy blue RAL 5005 according to the GSK guidelines

Nominal diameter

DN

Nominal pressure

PN


Body Seat

50 – 300 16 24 17.6

200 – 300 10 15 11



572561 50 16 216,10

760350 80 16 268,60

572562 100 16 299,40

572563 125 16 513,50

572564 150 16 513,50

572565 200 10 900,40

572787 200 16 944,60

572566 250 10 1.435,50

769042 250 16 1.508,50

572654 300 10 1.979,80

769043 300 16 2.080,60

Operation:

• Hand wheel




Düker valves

2014 price list

– 30 –

Düker valves

2014 price list

– 31 –

1. G

ate

Valv

es3.

Hyd

rant

s4.

But

terfl

y Va

lves

5. N

ovo

Plug

-in

Syst

em6.

Acc

esso

ries

7. P

ress

ure

Pipe

Fit

tings

Fl

ange

d Pr

essu

re P

ipes

Th

rust

-Res

ista

nt J

oint

s8.

Pre

ssur

e Pi

pe F

ittin

gs

wit

h N

ovo

Sock

et9.

Pre

ssur

e Pi

pe F

ittin

gs

for P

last

ic P

ipel

ines

10. P

ipe

Fitt

ings

for

Sew

age

Pipe

lines

2. S

ervi

ce C

onne

ctio

n Va

lves2. Service Connection Valves

Düker valves

2014 price list

– 32 –

düker Tapping valve TOPPN 16, gW 336, for spot drilling under pressure düker etec enamel finish for water for cast iron, steel and asbestos cement pipes dN 80 - 300

• TOP tapping valve with integrated service connection valve for top drilling with non-return flap

• TOP tapping valve with PE-HD connection according to DVGW VP 600

• TOPsi tapping valve with integrated service connection valve for horizontal drilling

• 12 mm stem square, all elastomers and plastic parts according to KTW recommendation and W 270 material approval, DVGW tested and registered.

PE-HD-ends laid out for two weldings

TOP tapping valve with PE 100 SDR 11


Item no. DN d Price in €

570354 25 32 404,40

570355 32 40 404,40

570356 40 50 435,30

570357 50 63 500,10

TOP tapping valve with internal pipe thread


Item no. Rp Price in €

570359 1 1/4 323,10

570360 1 1/2 323,10

570382 2 323,10

TOPsi tapping valve with internal pipe thread for horizontal drilling



570438 1 1/2 245,90

Nominal diameter

DN

Nominal pressure

PN


Body Seat

25 – 50 16 24 17.6

Material• Body EN-GJS-500-7 (JS 1050)• Stem – X20Cr13• Bonnet, obturator – special brass• Obturator – entirely vulcanized (elastomer – EPDM)

Surface protection• Düker etec enamel inside and outside

Düker valves

2014 price list

– 33 –

1. G

ate

Valv

es3.

Hyd

rant

s4.

But

terfl

y Va

lves

5. N

ovo

Plug

-in

Syst

em6.

Acc

esso

ries

7. P

ress

ure

Pipe

Fit

tings

Fl

ange

d Pr

essu

re P

ipes

Th

rust

-Res

ista

nt J

oint

s8.

Pre

ssur

e Pi

pe F

ittin

gs

wit

h N

ovo

Sock

et9.

Pre

ssur

e Pi

pe F

ittin

gs

for P

last

ic P

ipel

ines

10. P

ipe

Fitt

ings

for

Sew

age

Pipe

lines

2. S

ervi

ce C

onne

ctio

n Va

lves


558211 Blind 63,10

556486 1 67,20

556487 1 1/4 67,20

556489 1 1/2 68,20

556490 2 68,20

Clapping Band (Stainless Steel)for tapping valves TOP for tapping clamps fig. 88

Material • Flat clamping band and bolts 1.4301 • Plastic bonded flat clamping band• stainless steel A4 nuts – Coated sliding lacquer• stainless steel 1.4104 domed caps

DI = ductile cast iron CM = cement mortar AC = asbestos cement

Flat clamping band matching cast iron, steel and cement mortar pipe as well as asbestos cement pipe PN 12.5. The clamps come in a set together with the gasket.

Item no. DN Application Price in €

557222 80 DI/AC 38,10

557547 80 DICM 38,10

557554 80 Steel 38,10

557223 100 DI/steel/AC 39,10

557548 100 DICM 39,10

557575 100 Steel 39,10

557224 125 DI 45,30

557549 125 DICM/AC 45,30

557555 125 Steel 45,30

557225 150 DI/Steel 47,30

557550 150 DICM/AC 47,30

Item no. DN Application Price in €

557576 150 Steel 47,30

557511 175 DI/steel 49,40

557226 200 DI/steel 49,40

557551 200 DICM/AC 49,40

557271 225 DI/steel 54,50

557227 250 DI/steel 54,50

557552 250 DICM/AC 54,50

557556 300 AC 58,70

557228 300 DI/steel 58,70

557553 300 DICM 58,70

düker Tapping Clamp Fig. 88PN 10/16

Tapping clamp fig. 88 with internal pipe thread for vertical and horizontal drilling

Material • Body EN-GJS-500-7 (JS 1050)

Surface protection • inside and outside epoxy black RAL 9005 • inside Düker enamel as per DIN 51178 according to the GSK guidelines • outside bituminous coating



556560 Blind 38,10

556561 1 42,20

556562 1 1/4 42,20

556563 1 1/2 43,20

556564 2 43,20

Listed prices do not include the clapping bands (stainless steel).

Düker valves

2014 price list

– 34 –

düker Service Connection valve Type 1004PN 16, gW 336, diN eN 1074 part 1+2Face-to-face dimension diN 3202 part 4, basic series M 4 düker etec enamel finish for water

Resilient-seated gate valve, internal stem thread with connecting dimension DIN 2999-1, inside and outside etec enamel according to the DEV guidelines for class III soils, DIN 51178, 12 mm stem square, rubberized wedge, EPDM gaskets as well as plastic parts according to the KTW recommendation and W 270 material approval, DVGW tested and registered.

Material• Body EN-GJS-500-7 (JS 1050)• Stem – X20Cr13• Bonnet, obturator – special brass• Obturator – special brass entirely vulcanized (elastomer – EPDM)


Item no. DN Thread Price in €

570109 25 1“ 210,90

570032 32 1 1/4“ 244,90

570053 40 1 1/2“ 391,00

570082 50 2“ 407,50

Nominal diameter

DN

Nominal pressure

PN


Body Seat

25 – 50 16 24 17.6


Upon request:

• inside and outside epoxy blue RAL 5005 according to the GSK guidelines

Operation:

• Stem extension set • Hand wheel

Düker valves

2014 price list

– 35 –

1. G

ate

Valv

es3.

Hyd

rant

s4.

But

terfl

y Va

lves

5. N

ovo

Plug

-in

Syst

em6.

Acc

esso

ries

7. P

ress

ure

Pipe

Fit

tings

Fl

ange

d Pr

essu

re P

ipes

Th

rust

-Res

ista

nt J

oint

s8.

Pre

ssur

e Pi

pe F

ittin

gs

wit

h N

ovo

Sock

et9.

Pre

ssur

e Pi

pe F

ittin

gs

for P

last

ic P

ipel

ines

10. P

ipe

Fitt

ings

for

Sew

age

Pipe

lines

2. S

ervi

ce C

onne

ctio

n Va

lvesdüker Service Connection valve Type 1004

PN 4, gW 336 Face-to-face dimension diN 3202 part 4, basic series M 4 epoxy finish for gas

Resilient-seated valve, internal stem thread, connecting dimension DIN 2999-1, epoxy yellow RAL 1023 according to GSK inside and outside, special brass stem nut, rubberized wedge, NBR gaskets, DVGW tested and registered.

Material• Body EN-GJS-500-7 (JS 1050)• Stem – X20Cr13• Bonnet, obturator – special brass• Obturator – entirely vulcanized (elastomer – NBR)



570071 25 1“ 328,30

570038 32 1 1/4“ 359,10

570059 40 1 1/2“ 504,20

570088 50 2“ 554,60


Operation:


Nominal diameter

DN

Nominal pressure

PN


Body Seat PG 3

0 – 4 bar

Water Air

25 – 50 4 24 0.5 and 6


Düker valves

2014 price list

– 36 –

düker Service Connection valve Type 1004PN 16, gW 336, with studs for welding on both sides Pe 100 face-to-face dimension diN 3202 part 4, basic series M 4 düker etec enamel finish for water

Resilient-seated gate valve with PE-HD connections according to DVGW VP 600 with connecting dimensions according to DIN 8074/8075, etec enamel according to the guidelines for class III soils inside and outside, DIN 51178, 12 mm stem square, rubberized wedge, EPDM gaskets as well as plastic parts according to the KTW recommendation and W 270, DVGW tested and registered.

Material• Body EN-GJS-500-7 (JS 1050)• Stem – X20Cr13• Bonnet – special brass• Obturator – special brass, entirely vulcanized (elastomer – EPDM)


Nominal diameter

DN

Nominal pressure

PN

SDR Test pressure in bar (water)

Body Seat

25 – 50 16 11 24 17.6



Item no. DN d Wall thickness PE 100 SDR 11

Price in €

570001 25 32 2.9 409,50

570026 32 40 3.7 527,90

570052 40 50 4.6 598,90

570081 50 63 5.8 685,30

Upon request:

• inside and outside epoxy blue RAL 5005 according to the GSK guidelines

Operation:


Düker valves

2014 price list

– 37 –

1. G

ate

Valv

es3.

Hyd

rant

s4.

But

terfl

y Va

lves

5. N

ovo

Plug

-in

Syst

em6.

Acc

esso

ries

7. P

ress

ure

Pipe

Fit

tings

Fl

ange

d Pr

essu

re P

ipes

Th

rust

-Res

ista

nt J

oint

s8.

Pre

ssur

e Pi

pe F

ittin

gs

wit

h N

ovo

Sock

et9.

Pre

ssur

e Pi

pe F

ittin

gs

for P

last

ic P

ipel

ines

10. P

ipe

Fitt

ings

for

Sew

age

Pipe

lines

2. S

ervi

ce C

onne

ctio

n Va

lvesdüker Service Connection valve Type 1004

PN 4, gW 336, with studs for welding on both sides Pe 100 face-to-face dimension diN 3202 part 4, basic series M 4 epoxy finish for gas

Resilient-seated gate valve with PE-HD connections according to DVGW VP 600 with connecting dimensions according to DIN 8074/8075, epoxy yellow RAL 1023 inside and outside according to GSK, 12 mm stem square, rubberized wedge, NBR gaskets, DVGW tested and registered.

Material• Body EN-GJS-500-7 (JS 1050)• Stem – X20Cr13• Bonnet, obturator – special brass• Obturator – entirely vulcanized (elastomer – NBR)

Surface protection• inside and outside Epoxy yellow RAL 1023 according to the GSK guidelines



Nominal diameter

DN

Nominal pressure

PN


Body Seat PG 3 0 – 4 bar

Water Air

25 – 50 4 11 24 0.5 and 6


Operation:


Item no. DN d Wall thickness PE 100 SDR 11

Price in €

570007 25 32 2.9 522,70

570037 32 40 3.7 693,50

570058 40 50 4.6 777,90

570087 50 63 5.8 902,40

Düker valves

2014 price list

– 38 –

Düker valves

2014 price list

– 39 –

1. G

ate

Valv

es3.

Hyd

rant

s4.

But

terfl

y Va

lves

5. N

ovo

Plug

-in

Syst

em6.

Acc

esso

ries

7. P

ress

ure

Pipe

Fit

tings

Fl

ange

d Pr

essu

re P

ipes

Th

rust

-Res

ista

nt J

oint

s8.

Pre

ssur

e Pi

pe F

ittin

gs

wit

h N

ovo

Sock

et9.

Pre

ssur

e Pi

pe F

ittin

gs

for P

last

ic P

ipel

ines

10. P

ipe

Fitt

ings

for

Sew

age

Pipe

lines

2. S

ervi

ce C

onne

ctio

n Va

lves3. Hydrants

Düker valves

2014 price list

– 40 –

düker Underground Hydrant Type 304, design AdN 80 PN 16, according to diN eN 1074-6 düker etec enamel finish for water

Connection flange according to DIN EN 1092-2, single shut-off, fully enamelled body with automatic drainage and protection against pressurised water, outlet cover with chain, secured obturator linkage, integrated flange sealing, all elastomers and plastic parts according to KTW recommendation and DVGW W 270, DVGW tested and registered, CE marking according to DIN EN 14339.

Material• Body, bonnet, DIN outlet coupling, outlet cover: EN-GJS-500-7 (JS 1050)• Massive obturator linkage, stem X20Cr13• Stem nut and bonnet nut in special brass• Obturator – PU elastomer


Item no. Pipe covering m

PN Construc-tion

Price in €

570137 0.8 16 flange 413,70

570138 1 16 flange 452,80

570139 1.25 16 flange 489,80

570140 1.5 16 flange 619,50

Nominal diameter

DN

Nominal pressure PN


Body Seat

80 16 24 17.6


Drain stone type D made of PP see page 44

Suitable drain:772885 drain type D made of PP see page 46

Düker valves

2014 price list

– 41 –

1. G

ate

Valv

es3.

Hyd

rant

s4.

But

terfl

y Va

lves

5. N

ovo

Plug

-in

Syst

em6.

Acc

esso

ries

7. P

ress

ure

Pipe

Fit

tings

Fl

ange

d Pr

essu

re P

ipes

Th

rust

-Res

ista

nt J

oint

s8.

Pre

ssur

e Pi

pe F

ittin

gs

wit

h N

ovo

Sock

et9.

Pre

ssur

e Pi

pe F

ittin

gs

for P

last

ic P

ipel

ines

10. P

ipe

Fitt

ings

for

Sew

age

Pipe

lines

2. S

ervi

ce C

onne

ctio

n Va

lves

Suitable drain:772885 drain type D made of PP see page 46

düker Underground Hydrant Type 305, design addN 80 PN 16, according to diN eN 1074-6 düker etec enamel finish for water

Connection flange according to DIN EN 1092-2, dual shut-off, fully enamelled body with automatic drainage and protection against pressurised water, outlet cover with chain, secured obturator linkage, integrated flange sealing, all elastomers and plastic parts according to KTW recommendation and DVGW W 270, DVGW tested and registered, CE marking according to DIN EN 14339.

Material• Body, bonnet, DIN outlet coupling, outlet cover: EN-GJS-500-7 (JS 1050)• Massive obturator linkage, stem X20Cr13• Stem nut and bonnet nut in special brass• Obturator – PU elastomer• Sealing ball – steel, EPDM sheathed


Item no. Pipe covering m

PN Construc-tion

Price in €

568636 0.8 16 flange 536,10

569278 1 16 flange 577,30

569283 1.25 16 flange 611,20

567822 1.5 16 flange 747,10

Nominal diameter

DN

Nominal pressure PN


Body Seat

80 16 24 17.6


Drain stone type D made of PP see page 44

Düker valves

2014 price list

– 42 –

düker Underground Hydrant Type 304 S, design AdN 80 PN 16, according to diN eN 1074-6 düker etec enamel finish for water

Spigot end as per DIN EN 545, single shut-off, fully enamelled body with automatic drainage and protection against pressurised water, outlet cover with chain, secured obturator linkage, all elastomers and plastic parts according to KTW recommen-dations and DVGW W 270, DVGW tested and registered.

Material• Body, bonnet, DIN outlet coupling, outlet cover: EN-GJS-500-7 (JS 1050)• Massive obturator linkage, stem X20Cr13• Stem nut and bonnet nut in special brass• Obturator – PU elastomer


Item no. Pipe covering m H PN Construcion Price in €

763787 0.75 670 16 spigot end 702,80

763788 1 890 16 spigot end 730,60

763789 1.25 1140 16 spigot end 748,10

763790 1.5 1390 16 spigot end 934,30

Nominal diameter

DN

Nominal pressure PN


Body Seat

80 16 24 17.6


Düker valves

2014 price list

– 43 –

1. G

ate

Valv

es3.

Hyd

rant

s4.

But

terfl

y Va

lves

5. N

ovo

Plug

-in

Syst

em6.

Acc

esso

ries

7. P

ress

ure

Pipe

Fit

tings

Fl

ange

d Pr

essu

re P

ipes

Th

rust

-Res

ista

nt J

oint

s8.

Pre

ssur

e Pi

pe F

ittin

gs

wit

h N

ovo

Sock

et9.

Pre

ssur

e Pi

pe F

ittin

gs

for P

last

ic P

ipel

ines

10. P

ipe

Fitt

ings

for

Sew

age

Pipe

lines

2. S

ervi

ce C

onne

ctio

n Va

lvesdüker Pillar Hydrant Type 494, design aUd

dN 80 and 100, PN 16, according to diN eN 1074-6 with additional shut-off düker enamel finish for water

Connection flange according to DIN EN 1092-2, automatic drainage and protection against backflow and pressurised water, security lock of the internal mountings, traffic-area version with installation-friendly pre-determined breaking point, 2 B outlets, DN 100, optionally with or without A outlet, including drain set made of foam polystyrol, all elastomers and plastic parts according to KTW recommendation and DVGW W 270, DVGW tested and registered, CE marking according to DIN EN 14384.

Material• Bottom, upper and lower part of the pillar EN-GJS-500-7 (JS 1050)• Aluminum operating cap, outlets and outlet covers • Massive obturator linkage, stem X20Cr13• Stem nut, stem bearing, predetermined breaking coupling, bonnet nut special brass• Brass seat ring, rubberized EPDM• Obturator – entirely vulcanized (elastomer – EPDM)

Nominal diameter DN

Nominal pressure PN


Body Seat

80 – 100 16 24 17.6

Field of application: Drinking water up to 60 °C

delivery including drain set made of foam polystyrol

Alternative:• Upper part of the pillar: inside Düker etec enamel blue,

outside Düker enamel red

Item no. DN Pipe covering m

PN Price in €

558904

558905

80

2 upper outlets B

1.25

1.516

2.253,50

2.366,70

561000

561001

100

2 upper outlets B

1.25

1.516

2.715,50

2.817,40

558906

558907

100

2 upper outlets B

1 bottom outlet A

1.25

1.5

16

2.715,50

2.817,40


PN Price in €

571115

568354

80

2 upper outlets B

1.25

1.516

2.562,20

2.675,40

571116

568357

100

2 upper outlets B

1.25

1.516

3.025,30

3.126,10

573545

571224

100

2 upper outlets B

1 bottom outlet A

1.25

1.5

16

3.025,30

3.126,10

Surface protection• Inside: Düker enamel• Outside: Bottom and lower part of the pillar – base coat enamel

with epoxy resin cover coat in RAL 3001 signal red. Upper part of the pillar – 2K-PU lacquer RAL 3001 signal red

Düker valves

2014 price list

– 44 –

delivery including drain set made of foam polystyrol (see type 494)

düker Pillar Hydrant Type 495, design aFUddN 100 PN 16, with protective cover, according to diN eN 1074-6 with additional shut-off düker enamel finish for water

Connection flange according to DIN EN 1092-2, automatic drainage and protection against backflow and pressurised water, security lock of the internal mountings, traffic-area version with installation-friendly pre-determined breaking point, 2 upper valve outlets B under the protective cover, 1 bottom outlet A including drain set made of foam polystyrol, all elastomers and plastic parts according to KTW recommendation and W 270 material approval, DVGW tested and registered, CE marking according to DIN EN 14384.

Material• Bottom, upper and lower part of the pillar, valve head and hand wheel

EN-GJS-500-7 (JS 1050)• Aluminum outlets and outlet covers• Protective cover X5CrNi18-10• Massive obturator linkage, stem X20Cr13 • Stem nut, stem bearing, predetermined breaking coupling,

bonnet nut special brass• Brass seat ring, rubberized EPDM • Obturator – entirely vulcanized (elastomer – EPDM)

Surface protection• Inside: Düker enamel • Outside: Bottom and lower part of the pillar – base coat enamel with epoxy resin cover

coat in RAL 3001 signal red. Upper part of the pillar – 2K-PU lacquer RAL 3001 signal red


Price in €

561002 100 1.25 3.843,30

561003 100 1.5 3.944,20

Nominal diameter

DN

Nominal pressure PN


Body Seat

100 16 24 17.6


Upon request:


Düker valves

2014 price list

– 45 –

1. G

ate

Valv

es3.

Hyd

rant

s4.

But

terfl

y Va

lves

5. N

ovo

Plug

-in

Syst

em6.

Acc

esso

ries

7. P

ress

ure

Pipe

Fit

tings

Fl

ange

d Pr

essu

re P

ipes

Th

rust

-Res

ista

nt J

oint

s8.

Pre

ssur

e Pi

pe F

ittin

gs

wit

h N

ovo

Sock

et9.

Pre

ssur

e Pi

pe F

ittin

gs

for P

last

ic P

ipel

ines

10. P

ipe

Fitt

ings

for

Sew

age

Pipe

lines

2. S

ervi

ce C

onne

ctio

n Va

lves

The underground hydrant VD has an unrestricted pass with the nominal diameter of DN 80 and thus possesses an improved flow capacity. It is piggable and may be also used as a flushing and venting device. The variable construction allows flexibility in the adjustment of the pipe coverings by way of adding various flanged pipes or adjustable stem extension sets.

Alternatively• Massive upper part with Storz coupling B / DN 75 or DIN outlet coupling

and operating square• Automatic drainage or plug

Material• DIN outlet coupling and plate– EN-GJS-500-7 (JS 1050) • Bend and flanged pipe – EN-GJS-500-7 (JS 1050) • Gate valve type 4004:

• Body, bonnet and wedge – EN-GJS-500-7 (JS 1050) • Stem – X20Cr13 • Stem nut and clamping piece – special brass /aluminum bronze • Obturator – entirely vulcanized (Elastomer – EPDM / Elastomer -NBR)

Surface protection• Inside and outside epoxy coating according to the GSK guidelines

düker Underground Hydrant vd, design adN 80 PN 16For water / waste water

Item no. Pipe covering Price in €

570784 VD 1.00 1.637,10

572288 VD 1.25 1.781,20

758409 VD 1.50 1.916,00


Item no. Pipe covering Price in €

769201 VD 1.00 AW 1.864,50

572831 VD 1.25 AW 2.010,70

769202 VD 1.50 AW 2.143,40


Upon request:


Nominal diameter

DN

Nominal pressure PN


Body Seat

80 16 24 17.6

Düker valves

2014 price list

– 46 –

hydrant extension DIN outlet coupling extension stem extension

Item no. Item no.

Type 304/305 Type 393/394 Price in € Type 304/305 Type 393/394 mm Price in € Item no. Price in €

772486 772473 114,20 570985 561032 100 66,90 561040 47,30

772487 772474 138,90 570987 561034 150 85,40 561042 53,50

772488 772475 154,40 570989 561036 200 99,80 561044 54,50

772489 772476 198,60 570991 561038 300 141,00 561046 57,60

Item no.Type 393 / 394 Type 304 / 305

Price / Piece in €

569033 570558 DIN outlet coupling with self-locking cover 201,70

571816 with drill hole Type 304 security DIN outlet coupling lock in EN-GJS-500-7

91,60

81,30571591 without drill hole

567299 568637 Obturator linkage pipe covering 0,75 / 0,80assembly (obturator, 1,00rod, guiding piece)

1,25

1,50

133,80

567300 569281 150,20

567301 569286 170,80

567302 567835 197,60

569026 569419 DIN outlet coupling

O-ring 87-5 (DIN outlet coupling)

133,80

772471 7,20

877160 571223 Complete bonnet

O-ring 100-6 (bonnet)

107,00

104395 9,30

550556 Protective cast iron cover with stainless steel chain 27,80

566966 Orifice cover 26,80

772885 Drain type D made of PP 45,30

784879 Protective fleece

Type 494 / 495 Preis / Stück in €

561101 Repair set for pre-determined breaking point 49,40

For underground hydrant type 304/305, complete with stem and DIN outlet coupling extension made of ductile cast iron

Hydrant Accessories

extension for underground hydrant

Ventilation valves

Item no. Price / Piece in €

782406 for underground hydrants DN 80 only air purge on request

for pillar hydrants PN 16 air admission and air purge on request

for shaft hydrants air admission and air purge on request

for the automatic ventilation of hydrants

Düker valves

2014 price list

– 47 –

1. G

ate

Valv

es3.

Hyd

rant

s4.

But

terfl

y Va

lves

5. N

ovo

Plug

-in

Syst

em6.

Acc

esso

ries

7. P

ress

ure

Pipe

Fit

tings

Fl

ange

d Pr

essu

re P

ipes

Th

rust

-Res

ista

nt J

oint

s8.

Pre

ssur

e Pi

pe F

ittin

gs

wit

h N

ovo

Sock

et9.

Pre

ssur

e Pi

pe F

ittin

gs

for P

last

ic P

ipel

ines

10. P

ipe

Fitt

ings

for

Sew

age

Pipe

lines

2. S

ervi

ce C

onne

ctio

n Va

lves4. Butterfly Valves

Düker valves

2014 price list

– 48 –

düker Butterfly valve Type 4510/Type 451PN 10/16 diN eN 1074 part 1+2Face-to-face dimension diN eN 558 basic series 14 düker etec enamel finish for water

Resilient-seated butterfly valve, with slider crank gear and adjustable end stop, etec enamel inside and outside according to the DEV guidelines for class III soils, DIN 51178, favorable flow behavior supporting entirely enamelled valve disc with double eccentric shaft bearing, all elastomer and plastic parts according to KTW recommendation and DVGW W 270, DVGW tested and registered.

Material• Body, valve disc, retaining ring – EN-GJS-400-15 (JS 1030)• Retaining ring as of DN 700 - 1.4301• Profile gasket - EPDM• Shaft X20Cr 13• Bearing bush – red brass Rg 7

Surface protection• Düker etec enamel inside and outside• Starting with DN 700 Düker enamel on the inside, 2K lacquer

epoxy resin blue RAL 5005 on the outside


Nominal diameter

DN

Nominal pressure

PN


Body Seat

200 – 1200 10 15 11

100 – 1200 16 24 17.6

Type 4510

Type 451

w/out accessories with hand wheel

DN PN Item no. Price in € Item no. Price in €

100 16 781487 1.791,50 781811 1.840,90

125 16 781488 1.996,30 770157 2.045,70

150 16 781489 1.996,30 770281 2.045,70

200 10 781413 2.294,70 769423 2.344,10

200 16 781499 2.417,10 770155 2.466,50

250 10 781490 2.629,10 771939 2.678,50

250 16 781498 2.933,70 770321 2.983,10

300 10 773902 3.439,90 771234 3.491,40

300 16 773903 3.806,30 572764 3.856,70

350 10 781513 4.027,50 772768 4.076,90

350 16 781514 4.817,80 770350 4.867,20

400 10 781522 4.535,80 769167 4.585,20

w/out accessories with hand wheel

DN PN Item no. Price in € Item no. Price in €

400 16 569793 5.434,10 569759 5.483,50

500 10 569457 5.777,80 570518 5.882,80

500 16 570207 7.360,40 571484 7.463,30

600 10 569968 7.610,50 573069 7.713,40

600 16 570562 9.924,70 568947 10.042,00

700 10 561538 11.982,70 553911 12.100,00

700 16 573158 15.948,50 572079 15.997,90

800 10 561867 15.084,10 561174 15.201,40

800 16 571239 19.751,70 561175 19.801,00

900 10 572019 21.245,80 573161 21.295,20

900 16 573153 28.685,40 573162 28.790,40

1000 10 561871 23.021,80 561379 23.125,70

1000 16 568678 31.040,80 573163 31.144,70

1200 10 573157 35.618,80 569451 35.851,40

1200 16 573159 53.728,20 573164 53.833,20

Type 4510 Type 451

Note:

We deliver the following style butterfly valves upon request:• Pressure rating PN 25 from DN 100 to 600• Pressure rating PN 25 between DN 700 and

1200 on request

Operation:

• Hand wheel• Stem extension set• Electrical actuator1

• Pneumatic drive1

• Hydraulic drive1

1 special design upon request

Düker valves

2014 price list

– 49 –

1. G

ate

Valv

es3.

Hyd

rant

s4.

But

terfl

y Va

lves

5. N

ovo

Plug

-in

Syst

em6.

Acc

esso

ries

7. P

ress

ure

Pipe

Fit

tings

Fl

ange

d Pr

essu

re P

ipes

Th

rust

-Res

ista

nt J

oint

s8.

Pre

ssur

e Pi

pe F

ittin

gs

wit

h N

ovo

Sock

et9.

Pre

ssur

e Pi

pe F

ittin

gs

for P

last

ic P

ipel

ines

10. P

ipe

Fitt

ings

for

Sew

age

Pipe

lines

2. S

ervi

ce C

onne

ctio

n Va

lves

Item no. DN PN Price in €

781506 150 16 3.139,50

781507 200 10 3.607,70

781507 200 16 3.607,70

781510 250 10 3.908,10

781510 250 16 4.585,20

781512 300 16 5.412,50

789104 400 10 6.907,70

781532 400 16 7.583,70

781555 500 16 9.080,90

Listed prices do not include the connections. Slider crank gear with free shaft end.

düker Plug-in Socket Butterfly valve NovoPN 10/16 diN eN 1074 part 1+2Face-to-face dimension diN eN 558 basic series 14 düker etec enamel finish for water

Resilient-seated butterfly valve, with slider crank gear and adjustable end stop, with double-chamber socket for tensile strength ensuring connection to cast, steel and PE pipes, double-sided plug-in socket according to DIN 28603 TYTON® with pre-chamber, etec enamel inside and outside according to the DEV guidelines for class III soils, DIN 51178, favorable flow behavior supporting entirely enamelled valve disc with double eccentric shaft bearing, all elastomer and plastic parts according to KTW recommendation and DVGW W 270, DVGW tested and registered.

Material• Body, valve disc, clamping ring – EN-GJS-400-15 (JS 1030)• Profile gasket – EPDM• Shaft X20Cr 13• Bearing shafts – red brass Rg 7


Operation:


Nominal diameter

DN

Nominal pressure

PN


Body Seat

200 – 500 10 15 11.0

150 – 500 16 24 17.6



Resilient-seated butterfly valve, with slider crank gear and adjustable end stop, etec enamel inside and outside according to the DEV guidelines for class III soils, DIN 51178, favorable flow behavior supporting entirely enamelled valve disc with double eccentric shaft bearing, bypass approx. 1/10 of the main nominal dimension, all elastomer and plastic parts according to KTW recommendation and DVGW W 270, DVGW tested and registered.

Material• Body, valve disc, retaining ring – EN-GJS-400-15 (JS 1030)• Retaining ring as of DN 700 - 1.4301• Profile gasket - EPDM• Shaft X20Cr 13• Bearing bush – red brass Rg 7

Surface protection• Düker etec enamel inside and outside• Starting with DN 700 Düker enamel on the inside, 2K lacquer

epoxy resin blue RAL 5005 on the outside

Note:On request we deliver butterfly valves long body also without bypass.

Operation:• Stem extension set


Nominal diameter

DN

Nominal pressure

PN


Body Seat

300 – 1000 10 15 11

300 – 1000 16 24 17.6

2014 price list

düker Butterfly valve long BodyType 4510/Type 451 with BypassPN 10/16 diN eN 1074 part 1+2Face-to-face dimension diN eN 558 basic series 15 düker etec enamel finish for water

Item no. DN PN Bypass DN

Price in €

785226 300 10 40 upon request

789127 300 16 40 upon request

785225 400 10 40 upon request

772490 400 16 40 upon request

783437 500 10 50 upon request

772998 500 16 50 upon request

783423 600 10 50 upon request

780854 600 16 50 upon request

Item no. DN PN Bypass DN

Price in €

571503 700 10 80 upon request

571624 700 16 80 upon request

572494 800 10 80 upon request

570645 800 16 80 upon request

on request 900 10 upon request

on request 900 16 upon request

573093 1000 10 100 upon request

782542 1000 16 100 upon request

Type 4510 Type 451

Düker valves

2014 price list

– 51 –

1. G

ate

Valv

es3.

Hyd

rant

s4.

But

terfl

y Va

lves

5. N

ovo

Plug

-in

Syst

em6.

Acc

esso

ries

7. P

ress

ure

Pipe

Fit

tings

Fl

ange

d Pr

essu

re P

ipes

Th

rust

-Res

ista

nt J

oint

s8.

Pre

ssur

e Pi

pe F

ittin

gs

wit

h N

ovo

Sock

et9.

Pre

ssur

e Pi

pe F

ittin

gs

for P

last

ic P

ipel

ines

10. P

ipe

Fitt

ings

for

Sew

age

Pipe

lines

2. S

ervi

ce C

onne

ctio

n Va

lves5. Novo Plug-in System

Düker valves

2014 price list

– 52 –

valves for the Novo Plug-in System

düker plug-in socket gate valve Novo type 4004 düker etec enamel finish for waterdN 80 - dN 300

see page 12

düker spigot socket gate valve Novo type 4004 düker etec enamel finish for waterdN 80 - dN 300

see page 13

düker plug-in socket butterfly valve Novo type 4510 düker etec enamel finish for waterdN 150 - dN 500

see page 49

düker underground hydrant type 304 S, design a düker etec enamel finish for waterdN 80, pipe covering 0.75-1.50 m

see page 42

Düker valves

2014 price list

– 53 –

1. G

ate

Valv

es3.

Hyd

rant

s4.

But

terfl

y Va

lves

5. N

ovo

Plug

-in

Syst

em6.

Acc

esso

ries

7. P

ress

ure

Pipe

Fit

tings

Fl

ange

d Pr

essu

re P

ipes

Th

rust

-Res

ista

nt J

oint

s8.

Pre

ssur

e Pi

pe F

ittin

gs

wit

h N

ovo

Sock

et9.

Pre

ssur

e Pi

pe F

ittin

gs

for P

last

ic P

ipel

ines

10. P

ipe

Fitt

ings

for

Sew

age

Pipe

lines

2. S

ervi

ce C

onne

ctio

n Va

lves

> > > for additional Novo fittings please refer to pages 101 – 108

düker Pipe Section with Novo Socket Type MPN 10/16, for water

Socket pipe with double-chamber socket for tensile strength ensuring connection to cast steel and PE pipes, plug-in socket according to DIN 28603 TYTON® with pre-chamber, spigot according to DIN EN 545. Also suitable as hydrant extension.

Material• EN-GJS-500-7

Surface protection• Inside Düker enamel according to DIN 51178• Outside bitumen coating


Item no. DN Face-To-Face dimension

Price in €

552512 80 150 155,40

552515 80 200 163,60

552518 80 300 188,30

862522 100 400 217,10

862524 150 400 300,50

862526 200 400 564,90

Listed prices do not include the connections.

Upon request:

• Düker etec enamel inside and outside

• Inside and outside epoxy blue RAL 5005 according to GSK

Düker valves

2014 price list

– 54 –


düker Hydrant duck-foot Bend with Novo Sockets Type MMN and MMNRPN 10/16 for water according to diN eN 545

Double socket duckfoot bends with double-chamber sockets according to DIN 28603 TYTON® with pre-chamber. For installation of plug-in hydrants.


Surface protection• inside Düker enamel according to DIN 51178• outside bitumen coating


864212 80 w/out 224,30

864211 80 2 x 1 1/2" 259,30

864377 80 2 x 2" 267,50

Double socket duckfoot bend

Item no. DN Price in €

864494 100 / 80 275,80

864491 150 / 80 485,70

864496 200 / 80 806,70

Reduced double socket duckfoot bend


Upon request:



• With two lateral, internal pipe thread outlets


Düker valves

2014 price list

– 55 –

1. G

ate

Valv

es3.

Hyd

rant

s4.

But

terfl

y Va

lves

5. N

ovo

Plug

-in

Syst

em6.

Acc

esso

ries

7. P

ress

ure

Pipe

Fit

tings

Fl

ange

d Pr

essu

re P

ipes

Th

rust

-Res

ista

nt J

oint

s8.

Pre

ssur

e Pi

pe F

ittin

gs

wit

h N

ovo

Sock

et9.

Pre

ssur

e Pi

pe F

ittin

gs

for P

last

ic P

ipel

ines

10. P

ipe

Fitt

ings

for

Sew

age

Pipe

lines

2. S

ervi

ce C

onne

ctio

n Va

lves


düker long Socket Tee with Socket Branch Type BPN 10/16, for water

Long single socket tee with socket branch, with double-chamber socket NOVO in the passage, double-chamber socket NOVO in the centered branch, plug-in socket accor-ding to DIN 28603 TYTON® with pre-chamber, spigot in the passage according to DIN EN 545. For the installation of plug-in hydrants.



Item no. DN1 Price in €

864796 100 / 80 534,10

864800 150 / 80 685,30

864806 200 / 80 1.209,10


Upon request:




Düker valves

2014 price list

– 56 –


düker all Spigot Tee with Novo Socket Type MiPN 10/16, for water

single socket tee with spigot branch with one Novo double-chamber socket in the passage, plug-in socket according to DIN 28603 TYTON® with pre-chamber, spigot in the passage and outlet according to DIN EN 545.


Upon request:

• Düker etec enamel inside and outside• Inside and outside epoxy blue RAL 5005

according to GSK


Item no. DN1 DN2 Price in €

862449 80 80 258,30

862451 100 80 275,80

862458 100 100 292,20

862460 125 80 335,50

862467 125 100 335,50

862462 125 125 335,50

862465 150 80 406,50

862466 150 100 406,50

862472 150 125 406,50

862474 150 150 406,50

862481 200 80 566,00

862478 200 100 566,00

862479 200 125 566,00

862488 200 150 566,00

862480 200 200 566,00

862497 250 80 upon request













Düker valves

2014 price list

– 57 –

1. G

ate

Valv

es3.

Hyd

rant

s4.

But

terfl

y Va

lves

5. N

ovo

Plug

-in

Syst

em6.

Acc

esso

ries

7. P

ress

ure

Pipe

Fit

tings

Fl

ange

d Pr

essu

re P

ipes

Th

rust

-Res

ista

nt J

oint

s8.

Pre

ssur

e Pi

pe F

ittin

gs

wit

h N

ovo

Sock

et9.

Pre

ssur

e Pi

pe F

ittin

gs

for P

last

ic P

ipel

ines

10. P

ipe

Fitt

ings

for

Sew

age

Pipe

lines

2. S

ervi

ce C

onne

ctio

n Va

lves


düker all Spigot Tee Type iTPN 10/16, for water

All spigot tee with spigot ends according to DIN EN 545 for the installation of gate valves with plug-in socket.


Upon request:

• Düker etec enamel inside and outside• Inside and outside epoxy blue RAL 5005

according to GSK


Item no. DN1 DN2 Price in €

863417 80 80 252,10

863418 100 80 286,10

863419 100 100 288,10

863427 125 80 364,30

863428 125 100 364,30

863429 125 125 364,30

863430 150 80 439,40

863431 150 100 445,60

863432 150 125 449,70

863433 150 150 449,70

863434 200 80 641,10

863435 200 100 648,30

863464 200 125 658,60

863466 200 150 658,60

863468 200 200 663,70

877336 250 80 1.413,80

863866 250 100 1.413,80

769150 250 125 1.431,30

863867 250 150 1.431,30

863868 250 200 1.486,90





863473 300 150 1.620,70

863474 300 200 1.637,10


863482 300 300 1.739,00





Düker valves

2014 price list

– 58 –

düker Novo Fitting Type SPN 10/16, face-to-face dimension 800 mm for water

Smooth pipe with spigots according to DIN EN 545.




864203 80 245,90

864204 100 304,60

864205 150 422,90

864206 200 514,50

Upon request:





Düker valves

2014 price list

– 59 –

1. G

ate

Valv

es3.

Hyd

rant

s4.

But

terfl

y Va

lves

5. N

ovo

Plug

-in

Syst

em6.

Acc

esso

ries

7. P

ress

ure

Pipe

Fit

tings

Fl

ange

d Pr

essu

re P

ipes

Th

rust

-Res

ista

nt J

oint

s8.

Pre

ssur

e Pi

pe F

ittin

gs

wit

h N

ovo

Sock

et9.

Pre

ssur

e Pi

pe F

ittin

gs

for P

last

ic P

ipel

ines

10. P

ipe

Fitt

ings

for

Sew

age

Pipe

lines

2. S

ervi

ce C

onne

ctio

n Va

lvesdüker Novo Collar Type U

PN 10/16 for water according to diN eN 545

Collar with double-chamber sockets on both sides, plug-in sockets according to DIN 28603 TYTON® with pre-chamber.



Item no. DN Socket Price in €

864011 80 NO / NO 240,80

864015 100 NO / NO 249,00

864024 150 NO / NO 370,40

864127 80 SM / NO 240,80

864090 100 SM / NO 249,00

864091 150 SM / NO 370,40


Upon request:





Düker valves

2014 price list

– 60 –

düker Pe adapter Piece for Novo SocketsPN 10/16, for water, cast iron on PeConnector ensuring tensile strength for fittings, gate valves and butterfly valves for plug-in sockets NOvO-SiT®

PE adapter piece with factory-mounted support sleeve, circumferential retaining ring for holding the locking segments, PE spigot for all common welding methods SDR 11.

Material• Fitting made of PE 100 black• Support sleeve and retaining ring made of stainless steel

Item no. PE 100

DN Diameter Wall- Price in €thickness

557807 80 90 8.2 243,90

557808 100 110 10 307,70

557809 100 125 11.4 370,40

557810 125 140 12.8 422,90

557811 150 160 14.6 493,90

557859 150 180 16.4 514,50

557860 200 200 18.2 514,50

557861 200 225 20.5 514,50


Düker valves

2014 price list

– 61 –

1. G

ate

Valv

es3.

Hyd

rant

s4.

But

terfl

y Va

lves

5. N

ovo

Plug

-in

Syst

em6.

Acc

esso

ries

7. P

ress

ure

Pipe

Fit

tings

Fl

ange

d Pr

essu

re P

ipes

Th

rust

-Res

ista

nt J

oint

s8.

Pre

ssur

e Pi

pe F

ittin

gs

wit

h N

ovo

Sock

et9.

Pre

ssur

e Pi

pe F

ittin

gs

for P

last

ic P

ipel

ines

10. P

ipe

Fitt

ings

for

Sew

age

Pipe

lines

2. S

ervi

ce C

onne

ctio

n Va

lvesdüker Thrust-resisting Joint System NOvO-SiT®

for cast iron and steel pipes, PN 10/16/25, for waterrestrained connection according to eN 545

Internal thrust-resisting joint for the plug-in socket connection for cast iron and steel pipe consisting of: TYTON® gasket and NOVO-SIT® ring with vulcanized metal segments, elastomers EPDM, according to the KTW recommendation and material approval W 270.

Material• TYTON® gasket – EPDM• Thrust-resisting joint ring – EPDM• Stainless steel segments


874590 80

prices see page 108

874591 100

874593 125

874595 150

874597 200

874599 250

874601 300

Düker valves

2014 price list

– 62 –

düker Thrust-resisting Joint System NOvO-grip® IIIfor Pe pipes PN 10/16 for water, restrained connection

Internal thrust-resisting joint for the plug-in socket connection for PE pipe consisting of: GKS gasket and NOVO-Grip® III ring, elastomers and plastic parts according to KTW recommendation and material approval W 270.

Material• GKS gasket – EPDM• Thrust-resisting joint locking ring – POM

Item no. DN Diameter Price in €

754347 80 90 49,40

754348 100 110 57,60

757773 125 140 62,80

754349 150 160 72,00

754350 200 225 118,30

Stainless steel support sleeve for the use with PE 100

Item no. Dimensions d

Price in €

90 x 8.2 upon request

110 x 10 upon request



Note:

A support sleeve is required for the installation of a NOVO-Grip® connection.

Düker valves

2014 price list

– 63 –

1. G

ate

Valv

es3.

Hyd

rant

s4.

But

terfl

y Va

lves

5. N

ovo

Plug

-in

Syst

em6.

Acc

esso

ries

7. P

ress

ure

Pipe

Fit

tings

Fl

ange

d Pr

essu

re P

ipes

Th

rust

-Res

ista

nt J

oint

s8.

Pre

ssur

e Pi

pe F

ittin

gs

wit

h N

ovo

Sock

et9.

Pre

ssur

e Pi

pe F

ittin

gs

for P

last

ic P

ipel

ines

10. P

ipe

Fitt

ings

for

Sew

age

Pipe

lines

2. S

ervi

ce C

onne

ctio

n Va

lvesdüker Thrust-resisting

Joint System NOvO-grip® IIIfor Pe pipes PN 10/16 for water, restrained connection

düker laying equipment v 300 dfor pipes, fittings and valves

All-purpose laying equipment V 300 D for the installation of cast iron and PE pipes, fittings and valves for plug-in sockets according to DIN 28603 TYTON® and DIN 28603 TYTON® with Novo pre-chamber. Set includes: 1 clamp with crank pin (on the pipe) 1 clamp for the tension rods (on the sockets), 2 lever rods.


555471 80 1.500,00

552965 100 1.660,00

555483 125 1.780,00

553372 150 1.800,00

554077 200 1.915,00

555491 250 1.970,00

557107 300 2.115,00

Note:

Please specify pipe type when placing an order.

Düker valves

2014 price list

– 64 –

Plug-in Sockets dismantling equipmentUnlocking plates – reusable for the dismantling of SIT® and GRIP® connections

Unlocking plates

Unlocking plates > DN 300 upon request.

Set: 3 pieces (required)

Item no. price/item in €

570235 4,60

Number of unlocking devices needed

DN price per set

80 4

100 4

125 5

150 6

200 8

250 10

300 12

400 16

500 19

Striking members

Reusable striking members for holding the unlocking plates

Item no. DN price/item in €

570232 80 – 100 59,90

570233 125 – 150 59,90

570234 200 – 300 59,90

Unlocking devices for plug-in hydrants DN 80

Item no. DN price/item in €

561419 80 39,10

Düker valves

2014 price list

– 65 –

1. G

ate

Valv

es3.

Hyd

rant

s4.

But

terfl

y Va

lves

5. N

ovo

Plug

-in

Syst

em6.

Acc

esso

ries

7. P

ress

ure

Pipe

Fit

tings

Fl

ange

d Pr

essu

re P

ipes

Th

rust

-Res

ista

nt J

oint

s8.

Pre

ssur

e Pi

pe F

ittin

gs

wit

h N

ovo

Sock

et9.

Pre

ssur

e Pi

pe F

ittin

gs

for P

last

ic P

ipel

ines

10. P

ipe

Fitt

ings

for

Sew

age

Pipe

lines

2. S

ervi

ce C

onne

ctio

n Va

lves6. Accessories

2014 price list


düker Flap valves Fig. 125PN 10/16, with flange epoxy finish for water

Material• Body and cover in EN-GJS-500-7 (JS 1050)• Brass flap shaft• Elastomer flap sealing

Surface protection• inside and outside epoxy black RAL 9005 according to the GSK guidelines

Item no. DN PN Face-to-face dimension standard

Price in €

579504 50 16 210 141,00

579508 65 16 210 141,00

579512 80 16 210 152,30

579516 100 16 250 164,60

579520 125 16 250 339,60

579524 150 16 280 339,60

579528 200 10 300 410,60

579529 200 16 300 410,60

579532 250 10 350 534,10

571057 250 16 350 534,10

579536 300 10 360 874,70

572324 300 16 360 874,70

579537 350 10 390 1.224,50

781753 350 16 390 1.224,50

579538 400 10 390 1.576,40

571162 400 16 390 1.576,40

Nominal diameter

DN

Nominal pressure

PN


Body

200 – 400 10 15

50 – 400 16 24

Fig. 125 with flange connection


Düker valves

2014 price list

– 67 –

1. G

ate

Valv

es3.

Hyd

rant

s4.

But

terfl

y Va

lves

5. N

ovo

Plug

-in

Syst

em6.

Acc

esso

ries

7. P

ress

ure

Pipe

Fit

tings

Fl

ange

d Pr

essu

re P

ipes

Th

rust

-Res

ista

nt J

oint

s8.

Pre

ssur

e Pi

pe F

ittin

gs

wit

h N

ovo

Sock

et9.

Pre

ssur

e Pi

pe F

ittin

gs

for P

last

ic P

ipel

ines

10. P

ipe

Fitt

ings

for

Sew

age

Pipe

lines

2. S

ervi

ce C

onne

ctio

n Va

lves

type B

type C, E

type A

Cast iron Hand Wheel diN 3220 for Gate Valves Material black varnished gg20

Operating Keys diN 3223 a, B, C, e

Item no. DN SW Diameter Price in €

769541 40 / 50 14 /17 200 31,90

769578 65 / 80 17 /19 250 34,00

769539 100 – 150 19 /22 315 40,10

769538 175 / 200 24 /27 400 63,80

769582 250 / 300 27 /32 500 159,50

Item no. DIN 3223 Length x Width

Price in €

769159 form A Pillar hydrant small 27,80

769161 form B Pillar hydrant large 134,80

769162 form C Underground hydrants and valves

1100 x 420 62,80

769165 form E Tapping valves 750 x 320 55,60

769166 form E Tapping valves 1000 x 320 40,10

Additional operating keys upon request.

2014 price list


without position indicator with position indicator

Item no. Valve Type Pipe covering (Rd) approx.

Length GL obturator linkage*

Price in €

788459 DN 100, 125, 150, 200, 250, 300, 350, 400, 450, 500, 600

PN 10–

DN 100, 125, 150, 200, 250, 300, 350, 400, 450, 500,

PN 16–

DN 100, 125, 150, 200, 250, 300, 350, 400, 450,

PN 25

without position indicator

20 mm shaft

1.00 – 1.50 m 0.76 – 1.36 m 173,90

788460 1.20 – 1.80 m 0.91 – 1.60 m 194,50

788461 1.70 – 2.70 m 1.36 – 2.46 m 239,80

788462 2.50 – 3.20 m 2.16 – 3.26 m 285,00

788463with

position indicator up to 47 rev./lifting

20 mm shaft

1.00 – 1.50 m 0.76 – 1.36 m 653,40

786254 1.20 – 1.80 m 0.91 – 1.60 m 675,00

788464 1.70 – 2.70 m 1.36 – 2.46 m 720,30

788465 2.50 – 3.20 m 2.16 – 3.26 m 765,60

788459 DN 800, 900, 1000, 1200

PN 10–

DN 700, 800, 900, 1000

PN 16–

DN 600, 700, 800, 1000

PN 25


20 mm shaft

1.00 – 1.50 m 0.76 – 1.36 m 173,90

788460 1.20 – 1.80 m 0.91 – 1.60 m 194,50

788461 1.70 – 2.70 m 1.36 – 2.46 m 239,80

788461 2.50 – 3.20 m 2.16 – 3.26 m 285,00

788466with


20 mm shaft

1.00 – 1.50 m 0.76 – 1.36 m 653,40

788467 1.20 – 1.80 m 0.91 – 1.60 m 675,00

788468 1.70 – 2.70 m 1.36 – 2.46 m 720,30

788469 2.50 – 3.20 m 2.16 – 3.26 m 765,60

788470 DN 700

PN 10–

DN 600

PN 16–

DN 500

PN 25


30 mm shaft

1.00 – 1.50 m 0.76 – 1.36 m 173,90

788471 1.20 – 1.80 m 0.91 – 1.60 m 194,50

788473 1.70 – 2.70 m 1.36 – 2.46 m 239,80

788474 2.50 – 3.20 m 2.16 – 3.26 m 285,00

788475with


30 mm shaft

1.00 – 1.50 m 0.76 – 1.36 m 653,40

788476 1.20 – 1.80 m 0.91 – 1.60 m 675,00

788477 1.70 – 2.70 m 1.36 – 2.46 m 720,30

788478 2.50 – 3.20 m 2.16 – 3.26 m 765,60

*Definition of pipe covering see page 71.

düker Telescope Stem extension set with flange bell for Butterfly ValvesMaterial• Square cap GJS400-15 galvanized• Obturator linkage S235JR hot zinc dipped• Coupling adapter GJS-400-15 galvanized• Aluminum position indicator• Centering cap PA• Protection tube PE-HD• Adapter disc EPDM

Düker valves

2014 price list

– 69 –

1. G

ate

Valv

es3.

Hyd

rant

s4.

But

terfl

y Va

lves

5. N

ovo

Plug

-in

Syst

em6.

Acc

esso

ries

7. P

ress

ure

Pipe

Fit

tings

Fl

ange

d Pr

essu

re P

ipes

Th

rust

-Res

ista

nt J

oint

s8.

Pre

ssur

e Pi

pe F

ittin

gs

wit

h N

ovo

Sock

et9.

Pre

ssur

e Pi

pe F

ittin

gs

for P

last

ic P

ipel

ines

10. P

ipe

Fitt

ings

for

Sew

age

Pipe

lines

2. S

ervi

ce C

onne

ctio

n Va

lves

stem extension set for gate valves

stem extension set for house connecting valves

Rigid Stem extension set

Material• Square cap GJS400-15 galvanized / with VAS

S235JR integrally forged• Obturator linkage S235JR hot zinc dipped• Coupling adapter, galvanized, one-sided

tapered with elongated hole and Clip Pin • Centering cap PA• Protection tube PE-HD • Socket adapter PE

Item no. Valve Pipe covering (Rd) approx.

Length GL Obturator linkage *

Price in €

769513

Service con-nection valve

(SW12)

0.75 m 0.49 m 19,60

769512 1.00 m 0.74 m 19,60

769514 1.25 m 0.99 m 20,60

769519 1.50 m 1.18 m 22,60

769515 2.00 m 1.74 m 27,80

769448 0.75 m 0.45 m 38,10

769253 Gate valve 1.00 m 0.70 m 38,10

769144 DN 40/50 1.25 m 0.95 m 40,10

769258 (SW14) 1.50 m 1.20 m 41,20

769449 2.00 m 1.70 m 48,40

769482 0.75 m 0.41 m 43,20

769483 Gate valve 1.00 m 0.66 m 43,20

769484 DN 65 / 80 1.25 m 0.91 m 45,30

769486 (SW17) 1.50 m 1.16 m 50,40

769487 2.00 m 1.66 m 57,60

769452 0.75 m 0.31 m 45,30

769255 Gate valve 1.00 m 0.56 m 45,30

769146 DN 100 – 150 1.25 m 0.81 m 47,30

769260 (SW19) 1.50 m 1.06 m 53,50

769453 2.00 m 1.56 m 60,70

769454 0.75 m 0.24 m 56,60

769256 Gate valve 1.00 m 0.49 m 56,60

769147 DN 200 1.25 m 0.74 m 58,70

769261 (SW24) 1.50 m 0.99 m 64,80

769455 2.00 m 1.49 m 71,00

769257 1.00 m 0.38 m 70,00

769212 Gate valve DN 1.25 m 0.63 m 75,10

769262 250/300 1.50 m 0.88 m 81,30

769456 (SW27)

2.00 m 1.38 m 88,50

*Definition of pipe covering see page 71.


2014 price list

for tapping / house connection

valves

for gate valves

düker Telescope Stem extension set gW 336 dvgW Tested

Coupling Adapter Set

Düker Tapping Valve TOP Service connection valve 1004 and gate valve 2004 / 3004 / 4004 come in the standard version with matching terminal for stem extension sets according to GW 336. The coupling adapter with the installation-friendly Clip Pin is delivered separately.

Material• square cap GJS400-15 galvanized • Obturator linkage S235JR hot zinc dipped• Centering cap PA• Protection tube PE-HD• Socket adapter with additional hole PE

* Definition of pipe covering

see page 71

Item no. Valve Operating square

Connection Coupling adapter

Length GL Obturator linkage*

Price in €

769263

Tapping Valve Service connection

valve

e.g. TOP and 1004

0.40 – 0.65 m 61,70

769248 Square 0.65 – 1.15 m 61,70

769495 DIN 3223 E 20 x 20 mm 0.80 – 1.45 m 73,10

769267 socket adapter Ø 80 mm 0.90 – 1.55 m 77,20

769496 1.10 – 2.45 m 81,30

769264

Gate valve DN 40 – 150

e.g. 2004, 3004 and 4004

0.36 – 0.56 m 80,30

769249 Square 0.56 – 1.01 m 80,30

769608 DIN 3223 C 25 x 25 mm 0.76 – 1.36 m 90,60


769609 1.26 – 2.36 m 96,70

769292

Gate valve DN 200 – 300

e.g. 2004, 3004 and 4004

0.33 – 0.40 m 87,50

769252 Square 0.49 – 0.76 m 99,80

769271 DIN 3223 C 30 x 30 mm 0.74 – 1.22 m 108,00


769614 1.17 – 2.12 m 123,50

Item no. Price in €

769671 Tapping valve / Service connection

valve (SW12)

20,60

769287 DN 40 / 50 (SW14) 20,60

769288 DN 65 / 80 (SW17) 24,70

769289 DN 100 / 150 (SW19) 24,70

769290 DN 200 (SW24) 27,80

769291 DN 250 / 300 (SW27) 30,90

Coupling adapter galvanized, one-sided tapered with elongated hole and hole GW 336, 2x Clip Pin.

Düker valves

2014 price list

– 71 –

1. G

ate

Valv

es3.

Hyd

rant

s4.

But

terfl

y Va

lves

5. N

ovo

Plug

-in

Syst

em6.

Acc

esso

ries

7. P

ress

ure

Pipe

Fit

tings

Fl

ange

d Pr

essu

re P

ipes

Th

rust

-Res

ista

nt J

oint

s8.

Pre

ssur

e Pi

pe F

ittin

gs

wit

h N

ovo

Sock

et9.

Pre

ssur

e Pi

pe F

ittin

gs

for P

last

ic P

ipel

ines

10. P

ipe

Fitt

ings

for

Sew

age

Pipe

lines

2. S

ervi

ce C

onne

ctio

n Va

lvesStem extension sets according

to the dvgW Publication gW 336 definition Pipe CoveringDefinition of terms:GL = obturator linkage length,RD = pipe covering,GA = linkage departure point.

This formula and the GA information enable the calculation of the stem extension length for the required pipe covering. GL = RD – 170 mm – GA

After rearranging the formula it is also possible to calculate the pipe covering:RD = GL + 170 mm + GA

DN GA mm

40 180

50 200

65 230

80 224

100 238

125 260

150 290

200 350

250 515

300 565

Gate valves

DN GA mm

Service connection valve type 1004 25 115

32 130

40 127

50 148

Tapping valve TOP 236

Service connection valves

DN PN GA mm

100 10 / 16 / 25 146

125 10 / 16 / 25 134

150 10 / 16 / 25 121

200 10 / 16 96

200 25 150

250 10 71

250 16 / 25 126

300 10 / 16 / 25 101

350 10 / 16 75

350 25 91

400 10 50

400 16 / 25 66

450 10 / 16 / 25 41

500 10 / 16 16

500 25 141

600 10 -34

600 16 91

600 25 296

700 10 37

700 16 / 25 242

800 10 / 16 192

800 25 94

900 10 143

900 16 45

1000 10 89

1000 16 / 25 49

1200 10 -51

Butterfly valves


2014 price list

2014 price list

– 73 –Düker fittings

1. G

ate

Valv

es3.

Hyd

rant

s4.

But

terfl

y Va

lves

5. S

teck

syst

em N

ovo

6. A

cces

sori

es7.

Pre

ssur

e Pi

pe F

ittin

gs

Flan

ged

Pres

sure

Pip

es

Thru

st-R

esis

tant

Joi

nts

8. P

ress

ure

Pipe

Fit

tings

w

ith

Nov

o So

cket

9. P

ress

ure

Pipe

Fit

tings

fo

r Pla

stic

Pip

elin

es10

. Pip

e Fi

ttin

gs fo

r Se

wag

e Pi

pelin

es2.

Ser

vice

Con

nect

ion

Valv

es7. Pressure Pipe Fittings Flanged Pressure Pipes Thrust-Resistant Joints

Düker fittings

2014 price list

– 74 –

Item Socket Type

DN1 DN2 Item no. Epoxy

€

EpoxyItem no. Enamel

€

Enamel

Single socket SMU 40 40 747132 242,70 747131 260,40

tees with spigot SMU 80 40 747136 259,80 747135 274,70

and flanged branch SMU 80 80 747140 303,20 747139 320,80

(A) SMU 100 40 747143 273,00 747142 288,60

SMU 100 50 747146 286,80 747145 304,30

SMU 100 80 747150 286,80 747149 304,30

SMU 100 100 747153 286,80 747152 304,30

SMU 125 40 747156 304,60 747155 321,20

SMU 125 50 747159 304,60 747158 321,20

SMU 125 80 747162 346,90 747161 366,50

SMU 125 100 747165 319,40 747164 337,20

SMU 150 100 747175 468,60 747174 496,80

SMU 150 150 747179 477,90 747178 506,00

TYT 80 40 745748 183,20 745747 196,00

TYT 80 80 745751 229,50 745750 245,30

TYT 100 80 745728 245,80 745727 262,50

TYT 100 100 745722 259,80 745721 278,30

TYT 150 80 745739 416,90 745738 446,10

TYT 150 100 745732 418,50 745731 448,00

TYT 150 150 745735 427,80 745734 457,00

Item Socket Type1

Socket Type2


€


€

Enamel

SMU SMU 40 40 747189 249,90 747188 274,10

SMU SMU 100 100 754104 302,30 747192 315,40

Item Socket Type

DN Length Item no. Epoxy

€


€

Enamel

Flanged sockets (E) SMU 40 100 747207 106,20 747206 110,20

Item Socket Type

DN Item no. Epoxy

€


€

Enamel

TYT 80 745824 142,30 745823 157,30

TYT 100 745819 162,70 745818 179,70

SMU 80 747230 222,40 747229 235,50

SMU 100 747233 236,10 747232 248,00

Flanged socket duckfoot bends (EN)

Single socket tees with spigot

and socket branch

(B)

2014 price list


1. G

ate

Valv

es3.

Hyd

rant

s4.

But

terfl

y Va

lves

5. S

teck

syst

em N

ovo

6. A

cces

sori

es7.

Pre

ssur

e Pi

pe F

ittin

gs

Flan

ged

Pres

sure

Pip

es

Thru

st-R

esis

tant

Joi

nts

8. P

ress

ure

Pipe

Fit

tings

w

ith

Nov

o So

cket

9. P

ress

ure

Pipe

Fit

tings

fo

r Pla

stic

Pip

elin

es10

. Pip

e Fi

ttin

gs fo

r Se

wag

e Pi

pelin

es2.

Ser

vice

Con

nect

ion

Valv

es

Item DN Length Item no. Epoxy

€


€

Enamel

Flanged spigots (F) 40 300 870067 61,00 857637 63,70

50 300 857639 76,10 857638 81,30

65 400 870069 106,00 872582 112,00

80 350 858405 77,00 858403 87,00

100 360 856716 88,00 856712 94,60

125 370 856849 122,40 856842 133,40

Item Socket Type1

Socket Type2

DN Item no. Epoxy

€


€

Enamel

SMU SMU 40 747236 170,50 747235 186,00

Item Socket Type

DN Item no. Epoxy

€


€

Enamel

Flanged sockets (EU) SMU 40 747238 94,30 747237 101,80

SMU 50 747241 115,40 747240 124,00

SMU 65 747243 128,00 747242 138,70

SMU 80 747245 108,80 747244 114,30

SMU 100 747248 124,50 747247 129,90

SMU 125 747251 163,70 747250 171,30

SMU 150 747254 186,40 747253 194,80

SMU 200 747258 256,50 747257 267,50

SMU 250 747264 363,40 747263 378,40

SMU 300 747271 498,30 747270 519,10

SMU 350 747277 828,80 747276 867,10

SMU 400 747283 970,50 747282 1.013,50

TYT 80 745925 71,10 745924 78,30

TYT 100 745831 81,40 745830 90,50

TYT 125 745842 109,30 745841 122,00

TYT 150 745848 127,40 745847 136,60

TYT 200 745854 177,70 745853 190,00

TYT 250 745864 252,70 745863 269,40

TYT 300 745873 356,90 745872 380,30

TYT 350 745882 615,00 745881 656,30

TYT 400 745891 712,00 745890 758,50

TYT 500 745906 1.106,30 745905 1.179,20

TYT 600 745914 1.536,40 745913 1.636,10

TYT 700 745920 2.980,90 745919 3.148,60

TYT 800 745928 3.576,60 745927 3.843,40

TYT 1000 745837 5.691,70 745836 6.148,80

STO 400 754105 1.332,80 754112 1.386,70

STO 500 754106 1.996,40 754113 2.079,90

STO 600 754107 2.718,90 754114 2.843,30

STO 700 754108 4.974,20 754115 5.167,90

STO 800 754109 5.557,20 754116 5.764,90

Flanged socket bends 90° (EQ)

Düker fittings

2014 price list

– 76 –

* in-between lengths are available as well. For all lengths not mentioned we will invoice a surcharge of e 200 on the price of the closest larger length.


€


€

Enamel

Flanged pipes (F) 150 380 875257 128,40 856873 142,90

200 400 857499 190,90 857497 213,10

250 420 866505 288,00 866503 309,10

300 440 875258 380,30 866682 407,60

350 460 857544 688,50 857542 737,30

400 480 857573 838,90 857571 897,80

500 520 857607 1.430,50 857606 1.529,80

600 560 857616 2.126,10 713335 2.274,10

700 600 708825 3.235,90 707143 3.428,30

800 600 704145 3.848,10 718923 4.077,50

900 600 729507 5.042,20 741829 5.343,20

1000 600 737436 6.331,40 741830 6.709,00


€


€

Enamel

Double flanged pipes 40 100 870978 115,20 856684 121,60

(FF)* 40 150 856691 115,20 856688 121,60

40 200 856700 115,20 856693 121,60

40 300 856721 116,30 856717 124,00

40 400 856732 110,20 856727 115,20

40 500 856753 178,60 856743 188,90

40 600 856763 286,90 856756 303,90

40 800 856774 313,50 856769 331,50

40 1000 856784 313,50 856779 331,50

50 100 856791 97,00 856788 103,80

50 150 856797 97,00 856794 103,80

50 200 856803 83,50 856800 87,70

50 250 856810 118,00 856807 125,40

50 300 856825 97,00 856822 103,80

50 400 856837 120,50 856834 127,70

50 500 856841 120,50 856839 127,70

50 600 856848 233,30 856845 246,70

50 700 856853 399,40 856850 425,40

50 800 856862 399,40 856858 424,10

50 1000 856874 283,60 856870 302,10

65 100 864783 146,20 864850 154,90

65 150 864857 173,80 864860 184,40

65 200 864869 144,10 864871 152,90

65 300 864899 175,00 864904 186,70

65 400 864921 157,40 864924 167,90

65 500 864940 140,80 864943 150,30

65 600 864972 229,00 864968 241,70

65 800 864983 315,70 864985 335,40

65 1000 864992 315,70 864995 335,40

2014 price list


1. G

ate

Valv

es3.

Hyd

rant

s4.

But

terfl

y Va

lves

5. S

teck

syst

em N

ovo

6. A

cces

sori

es7.

Pre

ssur

e Pi

pe F

ittin

gs

Flan

ged

Pres

sure

Pip

es

Thru

st-R

esis

tant

Joi

nts

8. P

ress

ure

Pipe

Fit

tings

w

ith

Nov

o So

cket

9. P

ress

ure

Pipe

Fit

tings

fo

r Pla

stic

Pip

elin

es10

. Pip

e Fi

ttin

gs fo

r Se

wag

e Pi

pelin

es2.

Ser

vice

Con

nect

ion

Valv

es


€


€

Enamel


(FF)* 80 150 856896 78,00 856893 84,60

80 200 857154 78,00 857151 84,60

80 250 857165 87,70 857164 97,80

80 300 857174 92,70 857173 101,40

80 350 857182 115,30 857180 126,00

80 400 873613 115,30 857188 126,00

80 500 857201 115,30 857199 128,40

80 600 857356 202,60 857354 219,10

80 700 872593 209,50 857361 226,60

80 800 857370 209,50 857369 226,60

80 900 857375 287,50 857373 310,70

80 1000 857379 231,50 857378 250,20

80 1500 on request

80 2000 on request

100 100 857395 89,40 857394 97,50

100 150 857400 89,40 857399 97,50

100 200 857407 89,40 857405 97,50

100 250 857415 105,80 857414 114,90

100 300 857424 105,80 857422 117,20

100 350 857431 156,20 857430 170,00

100 400 857436 136,40 857435 148,50

100 500 857448 136,40 857446 148,50

100 600 857460 223,20 857458 241,00

100 700 857469 228,60 857467 246,70

100 800 857681 223,20 857680 241,00

100 900 873623 316,90 702709 343,70

100 1000 857687 248,00 857686 269,00

100 1500 on request

100 2000 on request

125 100 858449 143,80 858448 157,00

125 150 858453 150,80 858452 164,60

125 200 858458 139,10 858456 151,80

125 250 858462 161,60 858461 174,70

125 300 876049 151,20 858466 163,40

125 350 704457 244,50 705273 264,30

125 400 858467 216,60 858471 234,30

125 500 858474 202,60 858473 219,10

125 600 858479 323,30 858478 349,70

125 700 858483 362,20 707996 391,90

125 800 704525 323,30 858488 349,70

125 900 711336 465,80 741831 504,20

125 1000 858494 333,20 858493 360,70

125 1500 on request

125 2000 on request


Düker fittings

2014 price list

– 78 –


€


€

Enamel


(FF)* 150 150 858507 139,80 858506 151,80

150 200 858513 139,80 858512 154,70

150 250 858520 165,70 858519 180,50

150 300 858523 165,70 858522 180,50

150 350 704520 242,40 859071 263,40

150 400 859084 195,10 859080 210,50

150 500 859113 207,30 859110 230,30

150 600 859135 295,80 859133 320,70

150 700 703969 334,10 859150 362,40

150 800 859265 334,10 859263 362,40

150 900 859286 432,00 859284 466,70

150 1000 875308 374,20 859299 404,40

150 1500 on request

150 2000 on request

200 100 873709 197,50 865329 214,20

200 150 873710 197,50 865339 214,20

200 200 865350 183,90 865349 199,50

200 250 873713 220,70 865369 238,90

200 300 865382 206,30 865381 223,50

200 350 704456 326,80 874761 353,30

200 400 865409 263,40 865407 285,60

200 500 875311 267,30 865440 289,70

200 600 865466 401,50 865463 434,00

200 700 873717 467,20 865771 505,10

200 800 872708 464,30 865777 501,90

200 900 711338 613,30 877643 664,50

200 1000 875600 481,30 865788 531,50

200 1500 on request

200 2000 on request

250 100 704698 330,50 713922 357,00

250 150 876276 382,80 703220 413,50

250 200 865816 275,30 865815 298,50

250 250 701384 405,50 874766 438,80

250 300 865852 316,00 865850 341,40

250 350 710199 554,70 734045 600,00

250 400 865882 409,50 865880 443,70

250 500 865910 409,50 865908 443,70

250 600 877291 637,00 865946 688,50

250 700 711341 687,80 865968 743,50

250 800 703919 682,50 865981 737,70

250 900 712157 815,10 741838 882,10

250 1000 873723 681,10 865991 736,90

250 1500 on request

250 2000 on request


2014 price list


1. G

ate

Valv

es3.

Hyd

rant

s4.

But

terfl

y Va

lves

5. S

teck

syst

em N

ovo

6. A

cces

sori

es7.

Pre

ssur

e Pi

pe F

ittin

gs

Flan

ged

Pres

sure

Pip

es

Thru

st-R

esis

tant

Joi

nts

8. P

ress

ure

Pipe

Fit

tings

w

ith

Nov

o So

cket

9. P

ress

ure

Pipe

Fit

tings

fo

r Pla

stic

Pip

elin

es10

. Pip

e Fi

ttin

gs fo

r Se

wag

e Pi

pelin

es2.

Ser

vice

Con

nect

ion

Valv

es


€


€

Enamel


(FF)* 300 150 715819 393,40 705303 426,20

300 200 866191 331,50 866188 359,20

300 250 866225 434,70 711608 471,20

300 300 866250 359,30 866245 389,40

300 350 700441 644,90 734044 697,40

300 400 876277 543,80 866273 587,80

300 500 866292 528,50 866291 571,30

300 600 876026 732,50 866318 791,30

300 700 866335 732,50 872715 791,30

300 800 866354 732,50 866353 791,30

300 900 707840 918,70 716609 992,60

300 1000 866373 838,80 866372 906,30

300 1500 on request

300 2000 on request

350 200 732454 904,20 859387 976,50

350 250 737273 949,20 859396 1.026,40

350 300 719987 949,20 741840 1.026,40

350 350 714809 1.101,30 741842 1.189,90

350 400 705195 1.173,30 859414 1.267,80

350 500 702259 1.101,30 707247 1.189,90

350 600 725207 1.279,00 741843 1.381,80

350 700 716717 1.279,00 741844 1.381,80

350 800 703922 1.279,00 716265 1.381,80

350 900 731813 1.363,90 741845 1.473,60

350 1000 859433 1.363,90 711300 1.473,60

350 1500 on request

350 2000 on request

400 200 873800 1.009,60 859459 1.090,60

400 250 742076 1.076,00 732224 1.162,70

400 300 873803 1.076,00 859655 1.162,70

400 350 740227 1.219,00 741846 1.317,60

400 400 859663 1.219,00 859660 1.317,60

400 500 859668 1.219,00 859667 1.317,60

400 600 712904 1.340,20 719177 1.447,40

400 700 723111 1.340,20 741847 1.447,40

400 800 703923 1.340,20 713843 1.447,40

400 900 708827 1.435,90 741848 1.550,90

400 1000 859677 1.362,90 715216 1.471,90

400 1500 on request

400 2000 on request


Düker fittings

2014 price list

– 80 –



€


€

Enamel

Double flanged pipes 500 200 709486 1.574,20 713311 1.701,60

(FF)* 500 250 733791 1.662,00 722433 1.795,20

500 300 708229 1.794,60 731553 1.938,40

500 350 709195 1.809,40 859681 1.954,80

500 400 876914 1.809,40 741849 1.954,80

500 500 873811 1.611,60 874804 1.798,30

500 600 713574 2.092,40 741850 2.260,00

500 700 712258 2.092,40 741417 2.260,00

500 800 703924 2.237,80 859689 2.416,90

500 900 727385 2.397,60 733436 2.796,20

500 1000 706739 2.545,80 876210 2.749,60

500 1500 on request

500 2000 on request

600 200 715720 2.083,60 754681 2.250,20

600 250 727212 2.083,60 741418 2.251,00

600 300 736837 2.083,60 741476 2.251,00

600 350 742077 2.110,50 740682 2.280,60

600 400 712285 2.216,80 741478 2.395,70

600 500 859698 2.216,80 732369 2.395,70

600 600 859711 3.008,90 741481 3.250,10

600 700 722839 3.008,90 741482 3.250,10

600 800 704785 3.008,90 741484 3.250,10

600 900 754670 3.008,90 741716 3.250,10

600 1000 704419 3.008,90 741485 3.250,10

600 1500 on request

600 2000 on request

700 300 727228 3.827,70 741486 4.134,40

700 350 742078 3.991,20 741717 4.311,70

700 400 741903 3.991,20 741718 4.311,70

700 500 875866 4.232,30 741500 4.572,10

700 600 733936 4.795,50 733432 5.180,50

700 700 741905 4.795,50 741502 5.180,50

700 800 741907 5.085,10 741719 5.493,60

700 900 725548 5.085,10 741504 5.493,60

700 1000 724500 5.085,10 741514 5.493,60

700 1500 on request

700 2000 on request

800 300 722841 4.182,40 741515 4.517,20

800 350 741908 4.705,70 741720 5.083,00

800 400 711137 4.705,70 741516 5.083,00

800 500 722484 4.705,70 741517 5.083,00

800 600 711957 5.843,80 741518 6.312,60

800 700 741910 5.843,80 741519 6.312,60

800 800 721604 5.843,80 741520 6.312,60

800 900 741912 5.843,80 741521 6.312,60

800 1000 711958 5.843,80 741522 6.312,60

800 1500 on request

800 2000 on request

2014 price list


1. G

ate

Valv

es3.

Hyd

rant

s4.

But

terfl

y Va

lves

5. S

teck

syst

em N

ovo

6. A

cces

sori

es7.

Pre

ssur

e Pi

pe F

ittin

gs

Flan

ged

Pres

sure

Pip

es

Thru

st-R

esis

tant

Joi

nts

8. P

ress

ure

Pipe

Fit

tings

w

ith

Nov

o So

cket

9. P

ress

ure

Pipe

Fit

tings

fo

r Pla

stic

Pip

elin

es10

. Pip

e Fi

ttin

gs fo

r Se

wag

e Pi

pelin

es2.

Ser

vice

Con

nect

ion

Valv

es

Item DN €

Surcharge for flanged pipes with cast-on or welded-on puddle flanges

50 189,30

65 213,40

80 256,90

100 256,90

125 262,80

150 300,60

200 325,50

250 354,40

300 388,60

350 398,30

400 398,30

500 401,20

600 415,10

Item DN Angle Item no. Epoxy

€


€

Enamel

Double flanged bends 40 11° 860247 215,40 741523 225,50

(FFK) 50 11° 870984 220,90 725973 231,30

65 11° 870985 304,30 741524 319,00

80 11° 857795 148,70 857793 159,30

100 11° 857870 164,20 857864 177,00

125 11° 879210 248,70 857981 267,00

150 11° 858002 265,00 858001 284,50

200 11° 876791 437,20 865446 467,80

250 11° 706111 669,60 865907 709,80

300 11° 703503 947,80 865988 1.004,80

350 11° 739416 1.564,60 741525 1.658,30

400 11° 858036 1.207,00 706912 1.279,00

500 11° 858384 1.640,00 734426 1.738,70

600 11° 858421 4.287,60 858420 4.543,10

700 11° 875864 4.793,30 741526 5.079,60

800 11° 709353 5.291,60 741529 5.607,20

40 22° 860251 211,40 741540 221,30

50 22° 870988 204,50 719412 214,20

65 22° 870990 431,20 719411 451,90

80 22° 857809 148,70 857806 159,30

100 22° 857896 164,20 857893 177,00

125 22° 879211 255,80 857985 274,70

150 22° 858010 265,00 858009 284,50

200 22° 865465 437,20 865464 467,80

250 22° 876790 644,40 865937 683,20

300 22° 866006 947,80 866003 1.004,80

350 22° 727239 1.689,90 708118 1.791,80

400 22° 858044 1.276,80 858043 1.353,00

500 22° 877175 1.812,00 741541 1.921,00

600 22° 860246 4.287,60 712959 4.543,10

700 22° 874257 5.040,00 741543 5.339,80

800 22° 741914 5.433,20 741544 5.756,60

Düker fittings

2014 price list

– 82 –

Item DN Angle Item no. Epoxy

€


€

Enamel

Double flanged bends 40 30° 870991 199,30 741548 208,70

(FFK) 50 30° 870992 204,50 711064 228,10

65 30° 870993 449,30 719413 471,00

80 30° 857822 144,50 857819 154,80

100 30° 857927 164,20 857925 177,00

125 30° 857991 248,70 857989 267,00

150 30° 858020 265,00 858017 284,50

200 30° 865849 437,20 865841 467,80

250 30° 703959 644,40 870743 683,20

300 30° 866087 947,80 866086 1.004,80

350 30° 866130 1.779,70 741550 1.887,40

400 30° 858052 1.411,70 858050 1.496,00

500 30° 858393 2.122,50 876211 2.249,60

600 30° 712279 4.287,60 860270 4.543,10

700 30° 716620 6.148,10 741551 6.514,40

800 30° 738465 6.533,20 741552 6.987,40

40 45° 870077 126,00 860255 133,10

50 45° 857782 118,90 857776 124,70

65 45° 870078 212,30 870740 221,10

80 45° 857838 102,40 857833 110,70

100 45° 857951 115,30 857949 124,70

125 45° 857996 152,80 857995 164,30

150 45° 858029 188,60 858026 202,30

200 45° 865870 326,70 865866 350,80

250 45° 865963 498,90 865961 529,80

300 45° 866101 608,00 866099 644,70

350 45° 877997 1.151,10 704199 1.220,40

400 45° 858368 1.363,70 858367 1.445,90

500 45° 858401 2.421,10 858399 2.566,30

600 45° 706005 4.101,70 860434 4.346,20

700 45° 873794 5.708,80 741553 6.049,40

800 45° 878088 6.904,40 741554 7.314,80

2014 price list


1. G

ate

Valv

es3.

Hyd

rant

s4.

But

terfl

y Va

lves

5. S

teck

syst

em N

ovo

6. A

cces

sori

es7.

Pre

ssur

e Pi

pe F

ittin

gs

Flan

ged

Pres

sure

Pip

es

Thru

st-R

esis

tant

Joi

nts

8. P

ress

ure

Pipe

Fit

tings

w

ith

Nov

o So

cket

9. P

ress

ure

Pipe

Fit

tings

fo

r Pla

stic

Pip

elin

es10

. Pip

e Fi

ttin

gs fo

r Se

wag

e Pi

pelin

es2.

Ser

vice

Con

nect

ion

Valv

es

Item DN1 DN2 Length Item no. Epoxy

€


€

Enamel

Double flanged tapers 50 40 200 859261 92,80 859277 96,40

concentric (FFR) 65 40 200 870752 103,30 874483 108,90

65 50 200 870080 92,90 870079 98,00

80 40 200 876030 89,40 859292 95,90

80 50 200 859325 81,10 859321 87,00

80 65 200 859352 88,00 859348 94,40

100 40 200 859370 95,40 859368 103,50

100 50 200 859381 81,10 859376 87,00

100 65 200 859427 88,90 859422 96,50

100 80 200 859455 87,60 859448 95,10

125 65 200 702728 408,90 859751 437,40

125 80 200 859757 104,60 859756 114,60

125 100 200 859764 103,90 859763 113,80

150 50 300 704407 185,00 859774 198,80

150 80 200 859782 119,20 859781 127,70

150 100 200 859794 120,80 859792 129,50

150 125 200 859803 128,30 859802 137,60

200 80 300 874377 182,50 866192 195,90

200 100 300 866246 173,30 866234 186,00

200 125 300 877334 199,90 866284 214,70

200 150 300 866324 186,90 866319 200,70

250 80 300 703137 284,80 866390 711,10

250 100 300 866399 286,20 866398 306,50

250 125 300 701380 345,00 866424 749,80

250 150 300 870477 286,20 866443 306,50

250 200 300 866489 286,20 866487 306,50

300 100 300 866527 349,40 866526 374,50

300 150 300 866536 349,40 866535 374,50

300 200 300 872598 349,40 866550 374,50

300 250 300 866564 357,60 866563 382,20

350 200 300 874178 929,00 874504 994,30

350 250 300 701235 686,50 859923 735,40

350 300 300 859934 620,90 859932 665,40

400 200 300 860157 697,30 860152 745,90

400 250 300 860190 697,30 860186 745,90

400 300 300 860230 710,30 860228 760,20

400 350 300 860282 791,60 874181 847,20

500 250 600 708034 1.729,50 876240 1.851,00

500 300 600 701362 1.531,20 860447 1.638,80

500 350 600 711279 2.085,20 741555 2.230,90

500 400 600 860529 1.531,20 860528 1.638,80

600 350 600 741916 2.817,20 741359 3.013,60

600 400 600 860580 2.419,80 860576 2.588,60

600 500 600 860599 2.352,10 860597 2.516,10

700 500 600 861008 3.675,70 730991 3.895,60

700 600 600 861027 3.761,10 729434 3.986,00

800 500 600 720685 4.647,10 741360 4.924,60

800 600 600 705193 4.647,10 874525 4.924,60

800 700 600 704120 4.500,30 741361 4.768,90

900 800 600 878364 5.547,40 741363 5.878,30

1000 800 600 726043 6.443,90 741365 6.828,00

1000 900 600 741973 6.593,50 741366 6.986,60

Düker fittings

2014 price list

– 84 –

Item DN1 DN2 Length Item no. Epoxy

€


€

Enamel

Double flanged tapers 80 40 200 732240 312,30 741367 335,10

excentric (FFRe) 80 50 200 714972 340,80 870768 363,30

80 65 200 722038 456,50 741369 493,90

100 50 200 861708 286,50 735329 307,00

100 65 200 712741 391,60 741370 420,00

100 80 200 861714 278,90 861713 299,10

125 65 200 741974 332,30 741724 357,10

125 80 200 713109 282,80 741373 303,30

125 100 200 873902 441,40 741374 473,10

150 50 300 720648 568,00 734744 609,20

150 80 300 861759 483,70 741375 518,70

150 100 300 875940 364,00 861769 390,00

150 125 300 725391 574,90 741377 605,30

200 100 300 720930 523,60 729742 560,30

200 125 300 745455 666,60 722779 714,10

200 150 300 866735 518,30 874736 555,30

250 125 300 741975 971,70 741379 1.040,90

250 150 300 713189 919,90 741380 984,30

250 200 300 711272 942,50 741383 1.008,00

300 150 300 714208 1.125,40 866806 1.204,10

300 200 300 715103 1.241,50 866826 1.328,30

300 250 300 711335 1.241,50 866842 1.313,20

350 200 500 742818 1.656,60 741725 1.771,70

350 250 500 735281 1.846,70 741387 1.976,20

350 300 500 741977 1.877,40 716264 2.008,60

400 250 500 733789 1.660,90 741388 1.919,80

400 300 500 866878 1.775,80 741389 2.055,20

400 350 500 740537 2.005,00 741390 2.246,80

500 350 500 741978 2.315,40 741391 2.477,00

500 400 500 726607 2.201,90 873812 2.432,80

600 400 500 706004 3.240,70 734185 3.490,70

600 500 500 730770 3.240,70 721410 3.466,00

Item Socket Type

DN Angle Item no. Epoxy

€


€

Enamel

Single socket bends SMU 40 11° 747291 199,40 754117 213,50

(MK) SMU 80 11° 747307 164,10 747306 172,30

SMU 100 11° 747319 171,20 747318 180,80

SMU 125 11° 747331 224,60 747330 236,50

SMU 150 11° 747343 256,20 747342 267,70

SMU 200 11° 747355 393,30 747354 407,20

TYT 80 11° 746030 105,90 746029 113,20

TYT 100 11° 745937 111,70 745936 120,10

TYT 125 11° 745949 157,80 745948 169,60

TYT 150 11° 745961 182,30 745960 194,10

TYT 200 11° 745973 286,20 745972 305,70

TYT 250 11° 745985 423,50 745984 447,90

TYT 300 11° 745997 597,90 745996 631,40

2014 price list


1. G

ate

Valv

es3.

Hyd

rant

s4.

But

terfl

y Va

lves

5. S

teck

syst

em N

ovo

6. A

cces

sori

es7.

Pre

ssur

e Pi

pe F

ittin

gs

Flan

ged

Pres

sure

Pip

es

Thru

st-R

esis

tant

Joi

nts

8. P

ress

ure

Pipe

Fit

tings

w

ith

Nov

o So

cket

9. P

ress

ure

Pipe

Fit

tings

fo

r Pla

stic

Pip

elin

es10

. Pip

e Fi

ttin

gs fo

r Se

wag

e Pi

pelin

es2.

Ser

vice

Con

nect

ion

Valv

es

Item Socket Type


€


€

Enamel


(MK) SMU 80 22° 747310 158,20 747309 165,40

SMU 100 22° 747322 172,40 747321 180,80

SMU 125 22° 747334 226,70 747333 237,40

SMU 150 22° 747346 310,60 747345 326,60

SMU 200 22° 747358 496,90 747357 518,30

TYT 80 22° 746033 111,20 746032 124,80

TYT 100 22° 745940 116,80 745939 128,10

TYT 125 22° 745952 168,10 745951 178,70

TYT 150 22° 745964 230,50 745963 246,00

TYT 200 22° 745976 400,90 745975 427,70

TYT 250 22° 745988 438,30 745987 462,50

TYT 300 22° 746000 585,50 745999 619,30

SMU 40 30° 747295 149,00 754123 163,60

SMU 80 30° 747313 177,20 747312 185,60

SMU 100 30° 747325 192,00 747324 201,80

SMU 125 30° 747337 263,60 747336 277,30

SMU 150 30° 747349 343,80 747348 362,80

SMU 200 30° 747361 448,80 747360 468,60

TYT 80 30° 746036 118,40 746035 128,70

TYT 100 30° 745943 138,90 745942 148,30

TYT 125 30° 745955 201,60 745954 215,00

TYT 150 30° 745967 275,10 745966 294,10

TYT 200 30° 745979 335,40 745978 359,00

TYT 250 30° 745991 511,60 745990 541,40

TYT 300 30° 746003 724,00 746002 765,20

SMU 40 45° 747297 170,30 754124 185,10

SMU 80 45° 747316 186,90 747315 196,70

SMU 100 45° 747328 219,70 747327 231,60

SMU 125 45° 747340 258,00 747339 271,40

SMU 150 45° 747352 345,80 747351 364,40

SMU 200 45° 747364 545,80 747363 570,70

TYT 80 45° 746039 142,90 746038 152,80

TYT 100 45° 745946 173,30 745945 185,10

TYT 125 45° 745958 196,30 745957 209,70

TYT 150 45° 745970 261,30 745969 279,30

TYT 200 45° 745982 434,60 745981 464,40

TYT 250 45° 745994 543,40 745993 575,00

TYT 300 45° 746006 724,00 746005 765,20

Düker fittings

2014 price list

– 86 –

Item Socket Type1

Socket Type2


€


€

Enamel

Double socket tees SMU SMU 40 40 747387 226,20 747386 240,70

with flanged branch SMU SMU 50 50 747391 342,80 747390 371,60

(MMA) SMU SMU 65 65 747394 329,20 747393 356,80

SMU SMU 80 40 747396 265,90 747395 278,10

SMU SMU 80 50 747399 265,90 747398 277,90

SMU SMU 80 80 747404 265,90 747403 277,20

SMU SMU 100 40 747407 272,70 747406 283,00

SMU SMU 100 50 747410 261,50 747409 271,10

SMU SMU 100 80 747414 260,60 747413 270,90

SMU SMU 100 100 747417 267,60 747416 278,20

SMU SMU 125 40 747420 346,10 747419 360,50

SMU SMU 125 50 747423 331,50 747422 345,20

SMU SMU 125 80 747426 333,10 747425 346,70

SMU SMU 125 100 747429 343,90 747428 358,30

SMU SMU 125 125 747432 358,60 747431 373,60

SMU SMU 150 80 747439 382,20 747438 398,40

SMU SMU 150 100 747442 384,00 747441 400,50

SMU SMU 150 150 747446 441,50 747445 460,90

SMU SMU 200 80 747453 560,70 747452 584,30

SMU SMU 200 100 747456 562,60 747455 586,20

SMU SMU 200 150 747460 625,20 747459 651,80

SMU SMU 200 200 747463 614,50 747462 640,70

SMU SMU 250 80 747468 714,00 747467 742,50

SMU SMU 250 100 747471 716,00 747470 744,50

SMU SMU 300 80 747480 921,30 747479 956,10

SMU SMU 300 100 747483 921,30 747482 956,10

SMU SMU 300 150 747486 890,00 747485 924,50

SMU SMU 300 200 747489 1.016,60 747488 1.059,00

SMU SMU 300 300 747493 1.145,20 747492 1.197,40

TYT TYT 80 40 746344 148,40 746343 158,30

TYT TYT 80 50 746347 172,30 746346 183,90

TYT TYT 80 80 746352 147,90 746351 158,20

TYT TYT 100 40 746047 136,80 746046 145,60

TYT TYT 100 50 746050 159,10 746049 169,30

TYT TYT 100 65 746053 227,70 746052 243,90

TYT TYT 100 80 746056 146,00 746055 158,30

TYT TYT 100 100 746042 151,60 746041 162,60

TYT TYT 125 40 746070 179,80 746069 190,80

TYT TYT 125 50 746073 210,90 746072 224,80

TYT TYT 125 80 746077 201,80 746076 214,00

TYT TYT 125 100 746064 216,00 746063 229,80

TYT TYT 125 125 746067 304,20 746066 324,80

TYT TYT 150 40 746094 233,70 746093 249,40

TYT TYT 150 50 746097 287,00 746096 306,50

TYT TYT 150 80 746103 233,70 746102 249,40

TYT TYT 150 100 746080 241,60 746079 257,90

TYT TYT 150 125 746085 324,90 746084 346,70

2014 price list


1. G

ate

Valv

es3.

Hyd

rant

s4.

But

terfl

y Va

lves

5. S

teck

syst

em N

ovo

6. A

cces

sori

es7.

Pre

ssur

e Pi

pe F

ittin

gs

Flan

ged

Pres

sure

Pip

es

Thru

st-R

esis

tant

Joi

nts

8. P

ress

ure

Pipe

Fit

tings

w

ith

Nov

o So

cket

9. P

ress

ure

Pipe

Fit

tings

fo

r Pla

stic

Pip

elin

es10

. Pip

e Fi

ttin

gs fo

r Se

wag

e Pi

pelin

es2.

Ser

vice

Con

nect

ion

Valv

es

Item Socket Type1

Socket Type2


€


€

Enamel

Double socket tees TYT TYT 150 150 746088 259,20 746087 276,10

with flanged branch TYT TYT 200 40 746127 381,20 746126 406,00

(MMA) TYT TYT 200 50 746130 381,20 746129 406,00

TYT TYT 200 80 746137 339,20 746136 361,30

TYT TYT 200 100 746106 348,60 746105 371,30

TYT TYT 200 150 746114 385,80 746113 410,50

TYT TYT 200 200 746119 427,30 746118 454,40

TYT TYT 250 50 746164 541,30 746163 576,10

TYT TYT 250 80 746168 426,10 746167 454,00

TYT TYT 250 100 746140 472,30 746139 503,00

TYT TYT 250 150 746145 502,70 746144 534,40

TYT TYT 250 200 746150 569,40 746149 605,90

TYT TYT 250 250 746155 645,40 746154 688,10

TYT TYT 300 80 746198 562,60 746197 597,70

TYT TYT 300 100 746171 578,20 746170 614,30

TYT TYT 300 150 746178 606,90 746177 645,70

TYT TYT 300 200 746181 663,20 746180 706,00

TYT TYT 300 250 746186 919,60 746185 980,40

TYT TYT 300 300 746191 893,10 746190 952,10

TYT TYT 350 100 746201 1.248,80 746200 1.330,70

TYT TYT 350 200 746206 1.463,30 746205 1.559,60

TYT TYT 350 350 746213 1.577,60 746212 1.681,90

TYT TYT 400 80 746247 1.095,60 746246 1.166,60

TYT TYT 400 100 746220 1.097,40 746219 1.168,40

TYT TYT 400 150 746225 1.111,60 746224 1.183,70

TYT TYT 400 200 746228 1.298,60 746227 1.383,10

TYT TYT 400 300 746237 1.474,90 746236 1.572,30

TYT TYT 400 400 746242 1.611,40 746241 1.717,40

TYT TYT 500 80 746281 2.393,10 746280 2.548,60

TYT TYT 500 100 746253 2.393,10 746252 2.548,60

TYT TYT 500 150 746256 2.514,90 746255 2.679,00

TYT TYT 500 200 746259 2.514,90 746258 2.679,00

TYT TYT 500 300 746266 2.949,70 746265 3.144,40

TYT TYT 500 400 746271 3.242,90 746270 3.457,20

TYT TYT 500 500 746276 3.279,90 746275 3.496,70

TYT TYT 600 100 746284 3.088,00 746283 3.257,10

TYT TYT 600 150 746287 3.278,00 746286 3.457,60

TYT TYT 600 200 746290 3.088,00 746289 3.257,10

TYT TYT 600 250 746295 3.608,90 746294 3.808,70

TYT TYT 600 300 746299 3.608,90 746298 3.808,70

TYT TYT 600 400 746305 4.125,70 746304 4.355,20

TYT TYT 600 500 746309 4.540,00 746308 4.794,30

TYT TYT 600 600 746312 4.540,00 746311 4.794,30

TYT TYT 700 150 746319 5.065,60 746318 5.345,20

TYT TYT 700 200 746322 5.065,60 746321 5.345,20

TYT TYT 700 300 746326 6.238,80 746325 6.588,90

Düker fittings

2014 price list

– 88 –

Item Socket Type1

Socket Type2


€


€

Enamel

Double socket tees TYT TYT 700 400 746331 6.238,80 746330 6.588,90

with flanged branch TYT TYT 700 500 746334 6.577,60 746333 6.948,00

(MMA) TYT TYT 700 600 746337 6.727,00 746336 7.105,90

TYT TYT 700 700 746341 7.212,00 746340 7.620,20

TYT TYT 800 200 746359 7.108,40 746358 7.492,30

TYT TYT 800 300 746364 7.916,70 746363 8.348,50

TYT TYT 800 400 746369 7.916,70 746368 8.348,50

TYT TYT 800 500 746373 8.291,10 746372 8.744,90

TYT TYT 800 600 746377 9.078,90 746376 9.581,40

TYT TYT 800 700 746381 9.056,50 746380 9.556,20

TYT TYT 800 800 746384 9.919,30 746383 10.470,10

STO STO 500 80 754298 4.155,30 754126 4.288,50

STO STO 500 100 754301 4.155,30 754127 4.288,50

STO STO 500 150 754302 4.173,90 754130 4.308,20

STO STO 500 200 754303 4.173,90 754132 4.308,20

STO STO 500 300 754304 4.231,70 754134 4.369,70

STO STO 500 400 754305 4.997,60 754137 5.180,80

STO STO 500 500 754306 5.044,10 754140 5.229,40

STO STO 600 80 754307 5.312,50 754141 5.495,20

STO STO 600 100 754308 5.312,50 754144 5.495,20

STO STO 600 150 754309 5.312,50 754146 5.495,20

STO STO 600 200 754310 5.312,50 754148 5.495,20

STO STO 600 250 754311 5.918,80 754149 6.136,80

STO STO 600 300 754312 5.918,80 754150 6.136,80

STO STO 600 600 754313 6.615,20 754151 6.874,00

Item Socket Type1

Socket Type2


€


€

Enamel

All socket tees SMU SMU 40 40 747508 226,70 747507 242,80

(MMB) SMU SMU 80 40 747514 237,40 747513 242,70

SMU SMU 80 80 747518 254,20 747517 259,30

SMU SMU 100 40 754330 261,10 747520 267,30

SMU SMU 100 80 747524 279,80 747523 285,90

SMU SMU 100 100 747527 309,60 747526 315,50

SMU SMU 125 40 747530 344,10 747529 352,30

SMU SMU 125 50 747533 335,50 747532 342,90

SMU SMU 125 80 747536 355,60 747535 363,40

SMU SMU 125 100 747539 365,00 747538 372,30

SMU SMU 125 125 747542 395,90 747541 404,40

SMU SMU 150 80 747548 419,70 747547 429,00

SMU SMU 150 100 747551 436,90 747550 444,80

SMU SMU 150 125 747554 446,40 747553 457,10

SMU SMU 150 150 747557 485,40 747556 495,20

SMU SMU 200 80 747564 564,10 747563 577,80

SMU SMU 200 100 747567 584,00 747566 596,00

SMU SMU 200 125 747570 645,70 747569 663,20

SMU SMU 200 150 747573 665,20 747572 682,80

SMU SMU 200 200 747576 709,30 747575 723,70

SMU SMU 250 100 747580 795,10 747579 816,40

SMU SMU 300 100 747589 1.030,50 747588 1.059,10

2014 price list


1. G

ate

Valv

es3.

Hyd

rant

s4.

But

terfl

y Va

lves

5. S

teck

syst

em N

ovo

6. A

cces

sori

es7.

Pre

ssur

e Pi

pe F

ittin

gs

Flan

ged

Pres

sure

Pip

es

Thru

st-R

esis

tant

Joi

nts

8. P

ress

ure

Pipe

Fit

tings

w

ith

Nov

o So

cket

9. P

ress

ure

Pipe

Fit

tings

fo

r Pla

stic

Pip

elin

es10

. Pip

e Fi

ttin

gs fo

r Se

wag

e Pi

pelin

es2.

Ser

vice

Con

nect

ion

Valv

es

Item Socket Type1

Socket Type2


€


€

Enamel

All socket tees TYT SMU 80 40 746571 173,60 746570 182,90

(MMB) TYT TYT 80 80 746575 177,40 746574 188,30

TYT SMU 100 40 746400 176,50 746399 186,70

TYT SMU 100 50 746403 187,40 746402 211,20

TYT TYT 100 80 746406 171,90 746405 182,20

TYT TYT 100 100 746397 161,00 746396 170,40

TYT SMU 125 40 746415 247,70 746414 259,60

TYT SMU 125 50 746418 240,20 746417 257,20

TYT TYT 125 80 746421 234,50 746420 247,60

TYT TYT 125 100 746409 236,00 746408 248,60

TYT TYT 125 125 746412 259,00 746411 272,40

TYT SMU 150 40 746433 276,50 746432 289,80

TYT TYT 150 80 746437 253,10 746436 269,40

TYT TYT 150 100 746424 247,50 746423 263,00

TYT TYT 150 125 746427 301,80 746426 320,70

TYT TYT 150 150 746430 276,30 746429 292,40

TYT SMU 200 40 746451 375,10 754152 396,90

TYT SMU 200 50 746453 382,00 747003 403,30

TYT TYT 200 80 746456 357,00 746455 379,20

TYT TYT 200 100 746440 347,70 746439 368,80

TYT TYT 200 125 746443 432,80 746442 460,10

TYT TYT 200 150 746446 383,30 746445 407,00

TYT TYT 200 200 746449 423,90 746448 449,80

TYT TYT 250 80 746474 522,60 746473 555,90

TYT TYT 250 100 746459 510,70 746458 542,90

TYT TYT 250 150 746465 560,60 746464 596,40

TYT TYT 250 200 746468 613,10 746467 651,30

TYT TYT 250 250 746471 633,40 746470 672,50

TYT TYT 300 80 746496 696,10 746495 740,30

TYT TYT 300 100 746477 697,80 746476 741,80

TYT TYT 300 150 746483 727,50 746482 773,10

TYT TYT 300 200 746486 782,50 746485 831,30

TYT TYT 300 250 746489 954,00 746488 1.015,40

TYT TYT 300 300 746492 959,30 746491 1.020,40

TYT TYT 350 100 746499 1.535,00 746498 1.637,10

TYT TYT 350 200 746503 1.683,70 746502 1.794,10

TYT TYT 350 250 746506 2.232,80 746505 2.381,60

TYT TYT 350 300 746509 2.271,10 746508 2.422,50

TYT TYT 350 350 746512 2.374,10 746511 2.531,20

TYT TYT 400 100 746515 1.744,20 746514 1.858,40

TYT TYT 400 150 746518 1.748,00 746517 1.862,10

TYT TYT 400 200 746521 1.751,30 746520 1.865,10

TYT TYT 400 250 746524 1.799,50 746523 1.917,20

TYT TYT 400 300 746527 1.887,20 746526 2.009,90

TYT TYT 400 400 746530 3.066,50 746529 3.269,60

TYT TYT 500 100 746535 2.456,60 746534 2.614,80

TYT TYT 500 200 746538 3.115,30 746537 3.319,80

TYT TYT 500 300 746542 3.439,90 746541 3.654,90

TYT TYT 500 400 746545 3.412,70 746544 3.635,60

TYT TYT 500 500 746548 4.056,40 746547 4.320,30

Düker fittings

2014 price list

– 90 –

Item Socket Type1

Socket Type2


€


€

Enamel

All socket tees TYT TYT 600 600 746556 5.249,90 746555 5.591,30

(MMB) TYT TYT 700 250 746559 5.183,50 746558 5.521,70

TYT TYT 700 300 746562 5.242,30 746561 5.583,80

TYT TYT 700 400 746565 5.677,70 746564 6.046,60

TYT TYT 700 700 746568 7.235,50 746567 7.705,40

TYT TYT 800 300 746578 6.082,40 746577 6.464,20

TYT TYT 800 400 746581 6.140,90 746580 6.526,30

TYT TYT 800 700 746584 8.548,20 746583 9.093,50

TYT TYT 800 800 746587 9.049,80 746586 9.621,00

Item Socket Type1

Socket Type2

DN1 Angle Item no. Epoxy

€


€

Enamel

Double socket bends SMU SMU 40 11° 747604 165,20 747603 175,00

(MMK) SMU SMU 65 11° 747617 226,90 747616 239,70

SMU SMU 80 11° 747625 177,20 747624 183,60

SMU SMU 100 11° 747637 183,10 747636 187,60

SMU SMU 125 11° 747649 226,30 747648 233,50

SMU SMU 150 11° 747661 267,40 747660 280,60

SMU SMU 200 11° 747673 392,80 747672 403,30

SMU SMU 250 11° 747685 546,40 747684 556,10

SMU SMU 300 11° 747697 827,30 747696 845,80

SMU SMU 350 11° 747709 1.126,20 747708 1.153,20

SMU SMU 400 11° 747721 1.276,30 747720 1.302,60

TYT TYT 80 11° 746786 83,30 746785 92,80

TYT TYT 100 11° 746641 92,30 746640 98,20

TYT TYT 125 11° 746660 120,90 746659 130,70

TYT TYT 150 11° 746672 141,10 746671 148,80

TYT TYT 200 11° 746684 204,20 746683 215,90

TYT TYT 250 11° 746696 285,90 746695 303,00

TYT TYT 300 11° 746708 392,30 746707 416,10

TYT TYT 350 11° 746720 715,40 746719 753,00

TYT TYT 400 11° 746732 674,40 746731 715,80

TYT TYT 500 11° 746750 1.516,60 746749 1.612,40

TYT TYT 600 11° 746762 2.570,00 746761 2.734,00

TYT TYT 700 11° 746774 4.143,90 746773 4.369,20

TYT TYT 800 11° 746798 5.423,10 746797 5.708,00

STO STO 500 11° 754314 3.455,30 754153 3.549,40

STO STO 600 11° 754319 4.638,40 754158 4.782,40

Double socket pieces with 45° socket branch (MMC): see sewage programme page 114

2014 price list


1. G

ate

Valv

es3.

Hyd

rant

s4.

But

terfl

y Va

lves

5. S

teck

syst

em N

ovo

6. A

cces

sori

es7.

Pre

ssur

e Pi

pe F

ittin

gs

Flan

ged

Pres

sure

Pip

es

Thru

st-R

esis

tant

Joi

nts

8. P

ress

ure

Pipe

Fit

tings

w

ith

Nov

o So

cket

9. P

ress

ure

Pipe

Fit

tings

fo

r Pla

stic

Pip

elin

es10

. Pip

e Fi

ttin

gs fo

r Se

wag

e Pi

pelin

es2.

Ser

vice

Con

nect

ion

Valv

es

Item Socket Type1

Socket Type2


€


€

Enamel

Double socket bends SMU SMU 40 22° 747606 195,80 747605 208,00

(MMK) SMU SMU 65 22° 747619 218,00 747618 233,00

SMU SMU 80 22° 747628 175,20 747627 180,60

SMU SMU 100 22° 747640 185,90 747639 192,00

SMU SMU 125 22° 747652 245,50 747651 252,70

SMU SMU 150 22° 747664 279,30 747663 286,60

SMU SMU 200 22° 747676 411,30 747675 423,00

SMU SMU 250 22° 747688 576,20 747687 586,90

SMU SMU 300 22° 747700 812,80 747699 830,70

SMU SMU 350 22° 747712 1.279,70 747711 1.315,30

SMU SMU 400 22° 747724 1.323,10 747723 1.352,10

TYT TYT 80 22° 746789 85,20 746788 90,10

TYT TYT 100 22° 746644 95,70 746643 101,00

TYT TYT 125 22° 746663 120,70 746662 131,00

TYT TYT 150 22° 746675 146,20 746674 154,80

TYT TYT 200 22° 746687 218,90 746686 231,70

TYT TYT 250 22° 746699 298,40 746698 321,50

TYT TYT 300 22° 746711 427,90 746710 454,00

TYT TYT 350 22° 746723 789,10 746722 831,30

TYT TYT 400 22° 746735 745,90 746734 791,80

TYT TYT 500 22° 746753 1.667,90 746752 1.773,50

TYT TYT 600 22° 746765 2.833,20 746764 3.015,80

TYT TYT 700 22° 746777 4.594,30 746776 4.846,20

TYT TYT 800 22° 746801 6.040,50 746800 6.362,10

STO STO 500 22° 754315 3.696,80 754154 3.804,10

STO STO 600 22° 754320 4.995,10 754159 5.160,70

SMU SMU 40 30° 747608 195,80 747607 208,00

SMU SMU 65 30° 747621 277,30 747620 286,80

SMU SMU 80 30° 747631 180,30 747630 185,90

SMU SMU 100 30° 747643 192,00 747642 198,20

SMU SMU 125 30° 747655 238,10 747654 244,70

SMU SMU 150 30° 747667 314,50 747666 324,70

SMU SMU 200 30° 747679 414,80 747678 428,20

SMU SMU 250 30° 747691 597,50 747690 611,60

SMU SMU 300 30° 747703 799,50 747702 818,00

SMU SMU 350 30° 747715 1.232,90 747714 1.266,60

SMU SMU 400 30° 747727 1.415,90 747726 1.448,90

Düker fittings

2014 price list

– 92 –

Item Socket Type1

Socket Type2


€


€

Enamel

Double socket bends TYT TYT 80 30° 746792 91,70 746791 97,70

(MMK) TYT TYT 100 30° 746647 96,80 746646 103,40

TYT TYT 125 30° 746666 125,60 746665 136,20

TYT TYT 150 30° 746678 149,60 746677 158,30

TYT TYT 200 30° 746690 228,30 746689 243,00

TYT TYT 250 30° 746702 302,50 746701 320,90

TYT TYT 300 30° 746714 442,30 746713 469,70

TYT TYT 350 30° 746726 818,10 746725 862,50

TYT TYT 400 30° 746738 776,90 746737 824,90

TYT TYT 500 30° 746756 1.672,80 746755 1.778,40

TYT TYT 600 30° 746768 2.911,00 746767 3.098,40

TYT TYT 700 30° 746780 4.725,60 746779 4.985,00

TYT TYT 800 30° 746804 6.101,30 746803 6.488,10

STO STO 500 30° 754316 4.049,60 754155 4.179,20

STO STO 600 30° 754321 5.095,90 754160 5.268,20

SMU SMU 40 45° 747610 185,00 747609 198,50

SMU SMU 65 45° 747623 214,00 747622 230,10

SMU SMU 80 45° 747634 167,80 747633 172,50

SMU SMU 100 45° 747646 193,90 747645 199,80

SMU SMU 125 45° 747658 247,80 747657 256,10

SMU SMU 150 45° 747670 292,90 747669 301,80

SMU SMU 200 45° 747682 435,30 747681 448,30

SMU SMU 250 45° 747694 642,10 747693 657,90

SMU SMU 300 45° 747706 839,80 747705 860,50

SMU SMU 350 45° 747718 1.298,30 747717 1.335,10

SMU SMU 400 45° 747730 1.489,50 747729 1.493,60

TYT TYT 80 45° 746795 89,40 746794 95,00

TYT TYT 100 45° 746650 100,80 746649 107,50

TYT TYT 125 45° 746669 132,30 746668 142,70

TYT TYT 150 45° 746681 157,60 746680 167,70

TYT TYT 200 45° 746693 239,40 746692 253,50

TYT TYT 250 45° 746705 354,70 746704 376,60

TYT TYT 300 45° 746717 474,90 746716 504,40

TYT TYT 350 45° 746729 881,10 746728 928,60

TYT TYT 400 45° 746741 837,00 746740 889,60

TYT TYT 500 45° 746759 1.768,60 746758 1.881,10

TYT TYT 600 45° 746771 3.096,50 746770 3.297,40

TYT TYT 700 45° 746783 5.536,10 746782 5.843,80

TYT TYT 800 45° 746807 7.296,40 746806 7.692,70

STO STO 500 45° 754317 4.346,80 754156 4.492,90

STO STO 600 45° 754322 5.348,10 754162 5.535,30

2014 price list


1. G

ate

Valv

es3.

Hyd

rant

s4.

But

terfl

y Va

lves

5. S

teck

syst

em N

ovo

6. A

cces

sori

es7.

Pre

ssur

e Pi

pe F

ittin

gs

Flan

ged

Pres

sure

Pip

es

Thru

st-R

esis

tant

Joi

nts

8. P

ress

ure

Pipe

Fit

tings

w

ith

Nov

o So

cket

9. P

ress

ure

Pipe

Fit

tings

fo

r Pla

stic

Pip

elin

es10

. Pip

e Fi

ttin

gs fo

r Se

wag

e Pi

pelin

es2.

Ser

vice

Con

nect

ion

Valv

es

Item Socket Type1

Socket Type2


€


€

Enamel

Double socket SMU SMU 40 90° 747733 129,80 747732 135,70

bends 90° (MMQ) SMU SMU 65 90° 747737 223,40 747736 235,20

SMU SMU 80 90° 747739 199,10 747738 207,50

SMU SMU 100 90° 747742 203,90 747741 206,60

SMU SMU 125 90° 747745 285,50 747744 286,70

SMU SMU 150 90° 747748 333,10 747747 336,00

SMU SMU 200 90° 747751 532,30 747750 539,70

SMU SMU 250 90° 747754 789,50 747753 822,80

SMU SMU 300 90° 747757 1.386,90 747756 1.434,70

TYT TYT 80 90° 746853 99,60 746852 107,00

TYT TYT 100 90° 746818 112,40 746817 120,30

TYT TYT 125 90° 746821 172,40 746820 183,80

TYT TYT 150 90° 746824 187,40 746823 198,40

TYT TYT 200 90° 746827 290,40 746826 309,20

TYT TYT 250 90° 746830 439,30 746829 475,70

TYT TYT 300 90° 746833 661,70 746832 703,70

TYT TYT 350 90° 746836 1.615,60 746835 1.707,90

TYT TYT 400 90° 746839 1.612,20 746838 1.719,50

TYT TYT 500 90° 746844 2.449,70 746843 2.609,60

TYT TYT 600 90° 746847 3.971,20 746846 4.232,50

TYT TYT 700 90° 746850 7.455,60 746849 7.952,50

TYT TYT 800 90° 746856 8.204,60 746855 8.779,10

STO STO 500 90° 754318 3.961,50 754157 4.125,40

STO STO 600 90° 754323 5.383,70 754163 5.628,50

Item Socket Type1

Socket Type2


€


€

Enamel

Double socket tapers SMU SMU 50 40 747761 248,40 747760 261,90

(MMR) SMU SMU 80 40 747764 353,50 747763 373,20

SMU SMU 80 50 747767 195,50 747766 203,80

SMU SMU 80 65 747770 274,70 747769 288,30

SMU SMU 100 50 747775 204,60 747774 212,30

SMU SMU 100 65 747778 199,40 747777 208,00

SMU SMU 100 80 747781 179,00 747780 185,30

SMU SMU 125 80 754102 243,90 747783 252,30

SMU SMU 125 100 747786 253,10 747785 263,10

SMU SMU 150 80 747790 268,50 747789 278,00

SMU SMU 150 100 747793 279,60 747792 288,50

SMU SMU 150 125 747796 292,90 747795 303,50

SMU SMU 200 100 747800 385,50 747799 399,80

SMU SMU 200 125 747803 398,70 747802 413,00

SMU SMU 200 150 747806 403,10 747805 416,70

SMU SMU 250 150 747811 506,00 747810 524,50

SMU SMU 250 200 747814 540,40 747813 559,50

SMU SMU 300 200 747821 697,90 747820 723,60

SMU SMU 300 250 747824 749,30 747823 775,90

SMU SMU 350 300 747829 1.624,30 747828 1.685,50

SMU SMU 400 300 747836 1.764,80 747835 1.828,50

SMU SMU 400 350 747839 1.501,80 747838 1.545,40

Düker fittings

2014 price list

– 94 –

Item Socket Type1

Socket Type2


€


€

Enamel

Double socket tapers TYT TYT 100 80 746860 98,60 746859 104,40

(MMR) TYT TYT 125 80 746866 155,50 746865 165,00

TYT TYT 125 100 746863 159,00 746862 169,90

TYT TYT 150 80 746875 188,20 746874 199,90

TYT TYT 150 100 746869 176,70 746868 187,20

TYT TYT 150 125 746872 182,10 746871 194,40

TYT TYT 200 100 746878 245,30 746877 260,90

TYT TYT 200 125 746881 253,40 746880 275,80

TYT TYT 200 150 746884 254,60 746883 269,90

TYT TYT 250 150 746893 327,10 746892 347,20

TYT TYT 250 200 746896 339,10 746895 360,70

TYT TYT 300 150 746900 475,90 746899 504,80

TYT TYT 300 200 746903 466,30 746902 495,50

TYT TYT 300 250 746906 491,80 746905 522,30

TYT TYT 350 200 746909 1.120,20 746908 1.195,00

TYT TYT 350 250 746911 1.166,70 754164 1.244,50

TYT TYT 350 300 746914 1.234,20 746913 1.315,50

TYT TYT 400 250 746919 889,60 746918 946,80

TYT TYT 400 300 746922 940,60 746921 1.002,10

TYT TYT 400 350 746925 1.144,10 746924 1.217,90

TYT TYT 500 300 746930 2.314,90 746929 2.440,70

TYT TYT 500 400 746935 2.264,60 746934 2.391,00

TYT TYT 600 400 746939 2.988,80 746938 3.156,00

TYT TYT 600 500 746944 2.886,20 746943 3.045,30

TYT TYT 700 600 746948 3.781,80 746947 3.989,40

Item Socket Type


€


€

Enamel


90° (MQ) SMU 100 90° 747854 223,30 747853 235,90

SMU 125 90° 747857 271,70 747856 285,40

SMU 150 90° 747860 370,70 747859 391,50

SMU 200 90° 747863 565,10 747862 591,30

TYT 80 90° 746989 147,30 746988 163,30

TYT 100 90° 746966 177,80 746965 190,80

TYT 125 90° 746969 229,60 746968 244,40

TYT 150 90° 746972 293,70 746971 314,10

TYT 200 90° 746975 442,10 746974 472,80

TYT 250 90° 746978 1.311,70 746977 1.389,40

TYT 300 90° 746981 1.684,80 746980 1.783,60

2014 price list


1. G

ate

Valv

es3.

Hyd

rant

s4.

But

terfl

y Va

lves

5. S

teck

syst

em N

ovo

6. A

cces

sori

es7.

Pre

ssur

e Pi

pe F

ittin

gs

Flan

ged

Pres

sure

Pip

es

Thru

st-R

esis

tant

Joi

nts

8. P

ress

ure

Pipe

Fit

tings

w

ith

Nov

o So

cket

9. P

ress

ure

Pipe

Fit

tings

fo

r Pla

stic

Pip

elin

es10

. Pip

e Fi

ttin

gs fo

r Se

wag

e Pi

pelin

es2.

Ser

vice

Con

nect

ion

Valv

es

Item Socket Type

DN Item no. Epoxy

€


€

Enamel

Plugs (P) SMUP 40 747872 97,00

SMUP 80 747874 108,60 747873 113,30

SMUP 100 747876 121,50 747875 128,80

SMUP 150 747878 188,30 747877 203,90

SMUP 200 747880 266,60 747879 283,10

SMUP 250 774879 433,90 747881 457,00

TYT 80 774880 35,50 774887 40,20

TYT 100 774881 42,50 774888 49,80

TYT 150 774882 66,70 774889 82,30

TYT 200 774883 93,00 774890 109,50

TYT 250 774884 149,10 774891 172,20

TYT 300 774885 211,60 774892 240,70

Item DN Item no. Epoxy

€


€

Enamel

Double flanged 50 862905 108,40 862896 113,70

duckfoot bends 65 870073 229,20 728281 240,40

90° (N) 80 750046 101,90 750087 112,20

100 862998 126,80 862994 142,40

125 873659 222,60 874923 236,20

150 877562 248,50 863136 263,40

200 878947 467,70 866068 496,00

250 866078 817,80 866077 867,10

300 874511 932,10 874922 989,10

350 709229 2.335,80 741690 2.475,70

400 706994 2.942,00 736707 3.118,40

500 711278 4.417,00 741692 4.679,60

600 715789 6.380,20 741693 6.759,40

700 715800 9.614,00 741694 10.282,70

800 718922 12.623,90 741695 13.503,10

Item DN €

Epoxy

Screw plugs (PX) 40 58,00

(including rubber gasket and threaded hole)

Düker fittings

2014 price list

– 96 –

Item DN1 DN2 Item no. Epoxy

€


€

Enamel

All flanged tees 40 40 867060 112,40 867094 118,40

(T) 50 40 867097 144,20 867092 150,50

50 50 867121 116,20 867107 121,80

65 40 870555 186,50 704519 195,10

65 50 870556 159,40 867141 166,30

65 65 867152 146,60 867151 152,90

80 40 701268 139,50 867158 149,40

80 50 867172 123,20 867165 134,80

80 65 702710 156,50 870480 167,50

80 80 867202 126,50 867195 136,10

100 40 875447 146,20 867232 156,50

100 50 867245 139,10 867243 153,20

100 65 874191 158,80 867263 170,20

100 80 867271 131,60 867267 148,60

100 100 867290 135,00 867284 151,80

125 40 867310 246,10 867308 263,30

125 50 867318 240,80 867316 257,50

125 80 867333 175,20 867332 192,40

125 100 867710 187,20 867338 204,20

125 125 867717 197,40 867715 216,10

150 50 870486 239,60 867735 257,60

150 65 867748 322,40 867747 346,10

150 80 867758 219,20 867753 234,50

150 100 867775 219,20 867768 234,50

150 125 875289 254,10 867787 272,20

150 150 867802 229,90 867797 246,50

200 80 867836 331,20 867835 354,30

200 100 867859 332,80 867857 357,30

200 125 867883 404,10 867882 433,50

200 150 868102 336,20 868100 360,60

200 200 868117 347,90 868114 372,00


€


€

Enamel

Double flanged bends 40 867679 71,00 867800 76,70

90° (Q) 50 867822 83,40 867827 86,90

65 867847 100,70 867842 106,10

80 867896 102,40 867893 110,70

100 867924 115,30 867916 124,70

125 867941 152,80 867939 164,30

150 867961 188,60 867956 202,30

200 867993 326,70 867984 350,80

250 868042 498,90 868040 529,80

300 868069 608,00 868067 644,70

350 704035 1.145,60 741696 1.214,70

400 868093 1.363,70 868091 1.445,90

500 868278 2.631,90 868261 2.789,70

600 705976 5.200,20 741697 5.510,00

700 715799 6.616,00 741698 7.009,50

800 733938 7.661,00 741699 8.117,30

2014 price list


1. G

ate

Valv

es3.

Hyd

rant

s4.

But

terfl

y Va

lves

5. S

teck

syst

em N

ovo

6. A

cces

sori

es7.

Pre

ssur

e Pi

pe F

ittin

gs

Flan

ged

Pres

sure

Pip

es

Thru

st-R

esis

tant

Joi

nts

8. P

ress

ure

Pipe

Fit

tings

w

ith

Nov

o So

cket

9. P

ress

ure

Pipe

Fit

tings

fo

r Pla

stic

Pip

elin

es10

. Pip

e Fi

ttin

gs fo

r Se

wag

e Pi

pelin

es2.

Ser

vice

Con

nect

ion

Valv

es


€


€

Enamel

All flanged tees 250 80 876792 591,50 868144 633,90

(T) 250 100 868159 591,50 868157 633,90

250 125 868175 741,70 868173 794,60

250 150 868193 614,50 868189 657,40

250 200 875291 668,00 868223 714,60

250 250 868262 655,10 868258 701,60

300 80 874212 676,40 868474 723,90

300 100 874376 689,20 868483 737,50

300 150 868498 741,30 868497 793,50

300 200 875292 741,30 868513 793,50

300 250 876793 841,30 868521 900,10

300 300 868533 817,70 868531 874,80

350 80 868546 1.441,50 716262 1.527,40

350 100 703961 1.567,00 726792 1.660,40

350 150 725304 1.578,10 737060 1.672,30

350 200 703963 1.578,10 874359 1.672,30

350 250 738253 2.041,10 868567 2.163,20

350 300 868572 2.041,10 741700 2.163,20

350 350 703965 2.041,10 868575 2.163,20

400 80 705787 1.846,40 868582 1.975,40

400 100 868588 1.846,40 868587 1.975,40

400 150 703990 1.858,00 868597 1.988,20

400 200 868612 1.858,00 868610 1.988,20

400 250 712331 2.090,30 868623 2.236,10

400 300 701360 2.272,30 868630 2.431,00

400 400 868639 2.208,70 868638 2.362,80

500 100 868657 2.963,20 868656 3.140,20

500 150 868661 3.029,80 868660 3.211,40

500 200 868667 3.029,80 868664 3.211,40

500 250 877176 3.029,80 868675 3.211,40

500 300 868679 3.291,00 868678 3.486,90

500 350 723202 3.383,30 741701 3.584,60

500 400 709782 3.291,00 868689 3.486,90

500 500 868695 3.444,10 868694 3.650,10

600 100 705297 5.103,10 868705 5.407,50

600 150 868711 5.103,10 868710 5.407,50

600 200 868715 5.103,10 868714 5.407,50

600 250 741825 5.218,40 704332 5.529,10

600 300 868719 5.218,40 868718 5.529,10

600 350 736574 5.218,40 741702 5.529,10

600 400 868725 5.218,40 868724 5.529,10

600 500 868732 5.285,00 868731 5.600,20

600 600 700649 5.285,00 868735 5.600,20

700 100 729447 6.468,60 705408 6.854,40

700 200 873798 6.468,60 701704 6.854,40

700 400 709485 6.623,20 741703 7.017,40

700 500 868754 6.731,40 708851 7.132,10

700 600 711225 6.731,40 741704 7.132,10

700 700 702849 6.731,40 730992 7.132,10

Düker fittings

2014 price list

– 98 –


€


€

Enamel

All flanged tees 800 100 711961 9.460,20 741705 10.023,90

(T) 800 200 877991 9.460,20 741706 10.023,90

800 300 711960 9.862,00 741707 10.449,20

800 400 705183 9.862,00 868779 10.449,20

800 500 729287 10.195,40 741708 10.801,20

800 600 711959 10.195,40 721387 10.801,20

800 700 726906 10.663,50 741709 11.297,10

800 800 877990 10.663,50 741710 11.297,10


€


€

Enamel

All flanged cross tees 50 50 874903 296,30 868217 309,80

(TT) 80 80 868246 300,20 868241 318,50

100 80 700894 477,10 709749 511,50

100 100 868282 323,20 868279 343,10

125 125 702729 554,50 868304 588,70

150 100 868332 652,00 868327 697,50

150 150 868345 611,30 868342 647,90

200 100 874378 1.059,50 868355 1.133,40

200 150 868368 1.107,10 868366 1.185,10

200 200 874379 828,50 868382 878,50

250 250 868425 1.596,00 868423 1.691,70

300 300 700654 2.208,70 868456 2.362,40

350 350 726608 3.313,50 874911 3.543,70

400 400 704071 3.449,30 736487 3.690,30

500 500 717598 5.265,80 722431 5.631,70

Item Socket Type1

Socket Type2

DN Item no. Epoxy

€


€

Enamel

Collars SMU SMU 40 747887 113,40 747886 116,20

(U) SMU SMU 50 747889 146,20 747888 150,90

SMU SMU 65 747891 189,20 747890 199,20

SMU SMU 80 747893 144,50 747892 147,60

SMU SMU 100 747896 170,90 747895 175,20

SMU SMU 125 747900 218,40 747899 224,70

SMU SMU 150 747903 251,30 747902 258,30

SMU SMU 200 747908 356,00 747907 365,50

SMU SMU 250 747912 504,30 747911 517,40

SMU SMU 300 747916 655,90 747915 673,20

SMU SMU 350 747920 992,10 747919 1.020,40

SMU SMU 400 747924 1.172,90 747923 1.205,50

SMU SMU 500 747931 2.676,10 747930 2.764,40

STO STO 400 754324 1.853,30 754166 1.964,00

STO STO 500 754325 2.648,00 754168 2.722,60

STO STO 600 754326 3.341,40 754169 3.445,10

STO STO 700 754327 5.662,30 754170 5.857,80

STO STO 800 754328 6.730,30 754171 6.906,30

2014 price list


1. G

ate

Valv

es3.

Hyd

rant

s4.

But

terfl

y Va

lves

5. S

teck

syst

em N

ovo

6. A

cces

sori

es7.

Pre

ssur

e Pi

pe F

ittin

gs

Flan

ged

Pres

sure

Pip

es

Thru

st-R

esis

tant

Joi

nts

8. P

ress

ure

Pipe

Fit

tings

w

ith

Nov

o So

cket

9. P

ress

ure

Pipe

Fit

tings

fo

r Pla

stic

Pip

elin

es10

. Pip

e Fi

ttin

gs fo

r Se

wag

e Pi

pelin

es2.

Ser

vice

Con

nect

ion

Valv

es


€


€

Enamel

Blank flanges 40 757740 20,20 762984 23,80

(X) 50 757744 22,60 757741 25,40

65 757753 28,60 757752 32,90

80 869808 25,90 869807 34,50

100 869819 29,00 869818 37,60

125 869832 42,40 869831 52,40

150 869839 55,00 869838 66,30

200 869855 77,50 869854 94,70

250 869877 148,20 869876 181,30

300 869899 193,50 869897 235,30

350 703743 261,70 869950 317,80

400 869962 337,70 869961 410,60

500 869992 554,30 869983 594,40

600 871251 872,90 870002 934,50

700 870010 1.696,40 727943 2.061,70

800 709855 2.153,80 741711 2.618,20

Item Ø €

Epoxy€

Enamel

Surcharge for threaded holes in blank flanges up to 1“ 17,70 17,70

1 1⁄4“, 1 1⁄2“ 20,90 20,90

2“ 25,90 25,90

2 1⁄2“, 3“, 4“ on request on request

Hatchboxes see sewage programme page 114


€

Epoxy

Transition flange 4/8 holes 80 869414 48,10


€

Epoxy

Flanged bellmouths 80 703106 148,70

100 700094 180,10

150 700052 236,70

200 875566 328,70

250 709230 493,70

300 714207 629,80

350 741826 1.520,60

400 869487 1.015,20

500 712255 2.251,00

600 736819 4.075,80

Düker fittings

2014 price list

– 100 –

Item DN Item no. €

Screwed socket connection with Düker SMU thrust-resistant joint

40 736549 70,60

50 736550 82,70

65 736551 98,20


Screwed socket connection with Düker SPEZIAL thrust-resistant joint

80 735739 111,90

100 735740 124,10

125 735741 142,40 DN 80 up to DN 250 consisting of: screw ring with gliding chamfer. 150 735742 163,10 locking ring. SPEZIAL screw ring. gliding ring and sealing gasket 200 735743 211,00

250 735744 277,00 DN 300 up to DN 400 consisting of: screw ring with gliding chamfer. 300 735745 410,80 locking ring. SPEZIAL screw ring. gliding ring and sealing gasket 400 735746 598,90


TYTON SIT PLUS®

including marking ring EPDM

80 718291 23,00

100 718292 24,50

125 718293 32,30

150 718294 33,60

200 718295 66,70

250 718296 80,40

300 718297 115,20

350 718298 208,10

400 718299 254,60

500 718300 355,90

600 718301 474,20

consisting of: screw ring with gliding chamfer. locking ring. gliding ring and sealing gasket

2014 price list


1. G

ate

Valv

es3.

Hyd

rant

s4.

But

terfl

y Va

lves

5. N

ovo

Plug

-in

Syst

em6.

Acc

esso

ries

7. P

ress

ure

Pipe

Fit

tings

Fl

ange

d Pr

essu

re P

ipes

Th

rust

-Res

ista

nt J

oint

s8.

Pre

ssur

e Pi

pe F

ittin

gs

wit

h N

ovo

Sock

et9.

Pre

ssur

e Pi

pe F

ittin

gs

for P

last

ic P

ipel

ines

10. P

ipe

Fitt

ings

for

Sew

age

Pipe

lines

2. S

ervi

ce C

onne

ctio

n Va

lves8. Pressure Pipe Fittings with Novo Socket

Düker fittings

2014 price list

– 102 –


Item Connection DN Item no. Epoxy

€


€

Enamel

Flanged socket NOVO-SIT® 80 747987 172,80 747986 182,70

duckfoot bends (EN) NOVO-SIT® 100 747983 203,10 747982 213,80

Item Connection DN Item no. Epoxy

€


€

Enamel

Flanged sockets NOVO-SIT® 80 748090 113,10 748089 118,80

(EU) NOVO-SIT® 100 747990 132,50 747989 138,00

NOVO-SIT® 125 747998 166,80 747997 175,40

NOVO-SIT® 150 748009 201,80 748008 211,20

NOVO-SIT® 200 748019 288,20 748018 298,60

NOVO-SIT® 250 748032 405,20 748031 420,00

NOVO-SIT® 300 748044 568,60 748043 589,50

NOVO-SIT® 400 748056 1.238,80 748055 1.293,60

NOVO-SIT® 500 748066 2.022,20 748065 2.105,70

NOVO-SIT® 600 748074 2.776,80 748073 2.900,20

NOVO-SIT® 700 748082 4.616,20 748081 4.828,20

NOVO-SIT® 800 748086 4.711,30 754555 4.923,60

Item Connection DN Angle Item no. Epoxy

€


€

Enamel

Single socket bends NOVO-SIT® 80 11° 748462 146,70 748461 154,50

(MK) NOVO-SIT® 100 11° 748360 160,40 748359 169,30

NOVO-SIT® 125 11° 748372 206,30 748371 217,10

NOVO-SIT® 150 11° 748382 256,80 748381 270,40

NOVO-SIT® 200 11° 748395 388,10 748394 408,40

NOVO-SIT® 250 11° 748408 554,60 748407 583,70

NOVO-SIT® 300 11° 748421 785,20 748420 827,00

NOVO-SIT® 80 22° 748465 151,40 748464 159,00

NOVO-SIT® 100 22° 748363 166,40 748362 175,10

NOVO-SIT® 125 22° 748375 224,60 748374 236,50

NOVO-SIT® 150 22° 748385 313,20 748384 329,80

NOVO-SIT® 200 22° 748399 517,60 748398 546,50

NOVO-SIT® 250 22° 748411 543,90 748410 571,70

NOVO-SIT® 300 22° 748424 771,30 748423 812,30

NOVO-SIT® 80 30° 748468 146,70 748467 154,50

NOVO-SIT® 100 30° 748366 191,00 748365 201,80

NOVO-SIT® 125 30° 748377 262,80 748376 277,80

NOVO-SIT® 150 30° 748388 365,10 748387 386,10

NOVO-SIT® 200 30° 748402 442,80 748401 466,20

NOVO-SIT® 250 30° 748414 652,50 748413 689,30

NOVO-SIT® 300 30° 748427 925,40 748426 977,00

2014 price list


1. G

ate

Valv

es3.

Hyd

rant

s4.

But

terfl

y Va

lves

5. N

ovo

Plug

-in

Syst

em6.

Acc

esso

ries

7. P

ress

ure

Pipe

Fit

tings

Fl

ange

d Pr

essu

re P

ipes

Th

rust

-Res

ista

nt J

oint

s8.

Pre

ssur

e Pi

pe F

ittin

gs

wit

h N

ovo

Sock

et9.

Pre

ssur

e Pi

pe F

ittin

gs

for P

last

ic P

ipel

ines

10. P

ipe

Fitt

ings

for

Sew

age

Pipe

lines

2. S

ervi

ce C

onne

ctio

n Va

lves



€


€

Enamel

Single socket bends NOVO-SIT® 80 45° 748471 187,80 748470 199,00

(MK) NOVO-SIT® 100 45° 748369 232,00 748368 245,00

NOVO-SIT® 125 45° 748379 256,80 748378 270,40

NOVO-SIT® 150 45° 748391 348,30 748390 368,20

NOVO-SIT® 200 45° 748405 568,00 748404 601,40

NOVO-SIT® 250 45° 748417 652,50 748416 689,30

NOVO-SIT® 300 45° 748430 925,40 748429 977,00

Item Connection DN1 DN2 Item no. Epoxy

€


€

Enamel

Double socket tees NOVO-SIT® 80 40 754554 235,40 748334 246,80

with flanged branch NOVO-SIT® 80 50 748337 236,90 748336 248,20

(MMA) NOVO-SIT® 80 80 748341 215,60 748340 225,90

NOVO-SIT® 100 40 748097 230,60 748096 240,50

NOVO-SIT® 100 50 748100 230,60 748099 240,50

NOVO-SIT® 100 80 748103 236,60 748102 244,30

NOVO-SIT® 100 100 748094 245,90 748093 253,40

NOVO-SIT® 125 40 748112 290,60 748111 303,60

NOVO-SIT® 125 50 748115 300,00 748114 312,30

NOVO-SIT® 125 80 748118 290,60 748117 303,60

NOVO-SIT® 125 100 748106 301,60 748105 315,50

NOVO-SIT® 125 125 748109 316,70 748108 331,60

NOVO-SIT® 150 40 748131 377,80 748130 394,20

NOVO-SIT® 150 50 748134 419,10 748133 438,70

NOVO-SIT® 150 80 748137 385,20 748136 397,90

NOVO-SIT® 150 100 748121 388,20 748120 400,80

NOVO-SIT® 150 125 748124 437,20 748123 458,00

NOVO-SIT® 150 150 748128 392,70 748127 405,50

NOVO-SIT® 200 40 748155 544,30 748154 567,60

NOVO-SIT® 200 50 748158 544,30 748157 567,60

NOVO-SIT® 200 80 748161 554,90 748160 573,20

NOVO-SIT® 200 100 748141 556,20 748140 574,90

NOVO-SIT® 200 150 748145 582,70 748144 603,30

NOVO-SIT® 200 200 748148 631,00 748147 654,30

NOVO-SIT® 250 80 748181 707,70 748180 730,90

NOVO-SIT® 250 100 748165 710,60 748164 734,00

NOVO-SIT® 250 150 748170 765,20 748169 791,00

NOVO-SIT® 250 200 748173 823,00 748172 852,30

NOVO-SIT® 250 250 748176 931,80 748175 967,80

NOVO-SIT® 300 80 748206 955,00 748205 984,30

NOVO-SIT® 300 100 748184 956,70 748183 985,90

NOVO-SIT® 300 150 748187 962,80 748186 993,20

NOVO-SIT® 300 200 748190 1.021,90 748189 1.054,60

NOVO-SIT® 300 250 748195 1.244,50 754556 1.291,50

NOVO-SIT® 300 300 748200 1.244,50 748199 1.291,50

Düker fittings

2014 price list

– 104 –



€


€

Enamel

Double socket tees NOVO-SIT® 400 80 748237 1.970,30 748236 2.023,70

with flanged branch NOVO-SIT® 400 100 748209 1.973,40 748208 2.026,70

(MMA) NOVO-SIT® 400 150 748215 1.990,50 748213 2.044,70

NOVO-SIT® 400 200 748218 2.225,70 748217 2.294,60

NOVO-SIT® 400 300 748225 2.371,60 748224 2.449,20

NOVO-SIT® 400 400 748231 2.511,70 748230 2.597,40

NOVO-SIT® 500 80 748267 4.230,20 748266 4.365,00

NOVO-SIT® 500 100 748241 4.230,20 748240 4.365,00

NOVO-SIT® 500 150 748245 4.388,80 748244 4.532,50

NOVO-SIT® 500 200 748248 4.388,80 748247 4.532,50

NOVO-SIT® 500 300 748253 4.948,80 748252 5.125,90

NOVO-SIT® 500 400 748258 5.244,30 754703 5.439,00

NOVO-SIT® 500 500 748262 5.288,00 754557 5.485,60

NOVO-SIT® 600 100 748270 5.302,10 748269 5.475,30

NOVO-SIT® 600 150 748273 5.302,10 754558 5.475,30

NOVO-SIT® 600 200 748277 5.302,10 748276 5.475,30

NOVO-SIT® 600 250 748283 5.902,40 754559 6.110,80

NOVO-SIT® 600 300 748288 5.902,40 748287 6.110,80

NOVO-SIT® 600 400 748293 6.565,30 754560 6.813,00

NOVO-SIT® 600 500 748296 7.019,50 748295 7.294,20

NOVO-SIT® 600 600 748299 7.019,50 754561 7.294,20

NOVO-SIT® 700 150 748303 8.257,30 754562 8.613,30

NOVO-SIT® 700 200 748306 8.257,30 754563 8.613,30

NOVO-SIT® 700 400 748311 9.465,90 754564 9.905,30

NOVO-SIT® 700 500 748313 9.835,10 754565 10.300,30

NOVO-SIT® 700 600 748315 9.835,10 754566 10.300,30

NOVO-SIT® 700 700 748317 10.593,60 754573 11.111,80


€


€

Enamel

All socket tees NOVO-SIT® 80 80 748622 257,10 748621 266,20

(MMB) NOVO-SIT® 100 80 748478 271,10 748477 277,60

NOVO-SIT® 100 100 748474 280,30 748473 286,40

NOVO-SIT® 125 80 748489 326,10 748488 338,00

NOVO-SIT® 125 100 748481 335,10 748480 346,70

NOVO-SIT® 125 125 748484 373,50 748483 387,10

NOVO-SIT® 150 80 748504 402,50 748503 413,10

NOVO-SIT® 150 100 748492 410,10 748491 420,40

NOVO-SIT® 150 125 748495 489,60 748494 508,60

NOVO-SIT® 150 150 748498 460,20 748497 471,60

NOVO-SIT® 200 80 748521 555,00 748520 570,60

NOVO-SIT® 200 100 748507 564,20 748506 579,40

NOVO-SIT® 200 125 748510 654,60 748509 680,80

NOVO-SIT® 200 150 748513 620,50 748512 638,10

NOVO-SIT® 200 200 748516 689,10 748515 708,60

2014 price list


1. G

ate

Valv

es3.

Hyd

rant

s4.

But

terfl

y Va

lves

5. N

ovo

Plug

-in

Syst

em6.

Acc

esso

ries

7. P

ress

ure

Pipe

Fit

tings

Fl

ange

d Pr

essu

re P

ipes

Th

rust

-Res

ista

nt J

oint

s8.

Pre

ssur

e Pi

pe F

ittin

gs

wit

h N

ovo

Sock

et9.

Pre

ssur

e Pi

pe F

ittin

gs

for P

last

ic P

ipel

ines

10. P

ipe

Fitt

ings

for

Sew

age

Pipe

lines

2. S

ervi

ce C

onne

ctio

n Va

lves



€


€

Enamel

All socket tees NOVO-SIT® 250 80 748538 790,50 748537 815,30

(MMB) NOVO-SIT® 250 100 748524 796,50 748523 821,10

NOVO-SIT® 250 150 748529 868,30 748528 895,00

NOVO-SIT® 250 200 748532 947,90 748531 977,10

NOVO-SIT® 250 250 748535 974,40 748534 1.003,00

NOVO-SIT® 300 80 748558 1.081,50 748557 1.115,00

NOVO-SIT® 300 100 748541 1.087,50 748540 1.120,90

NOVO-SIT® 300 150 748546 1.115,60 748545 1.149,60

NOVO-SIT® 300 200 748549 1.221,50 748548 1.259,10

NOVO-SIT® 300 250 748552 1.438,00 748551 1.486,80

NOVO-SIT® 300 300 748555 1.484,60 748554 1.531,90

NOVO-SIT® 400 100 748561 2.671,60 748560 2.790,30

NOVO-SIT® 400 150 748564 2.690,20 748563 2.808,60

NOVO-SIT® 400 200 748567 2.714,70 748566 2.832,40

NOVO-SIT® 400 250 748570 2.789,70 748569 2.911,30

NOVO-SIT® 400 300 748573 2.931,50 748572 3.058,20

NOVO-SIT® 400 400 748576 3.980,40 748575 4.162,50

NOVO-SIT® 500 100 748580 3.952,90 754574 4.107,60

NOVO-SIT® 500 200 748584 4.990,90 748583 5.214,80

NOVO-SIT® 500 300 748586 5.020,30 754576 5.238,90

NOVO-SIT® 500 400 748588 5.588,50 754580 5.829,70

NOVO-SIT® 500 500 748590 6.318,40 754584 6.584,00

NOVO-SIT® 600 600 748601 8.027,00 754588 8.372,90

NOVO-SIT® 700 250 748606 8.497,80 754589 8.860,40

NOVO-SIT® 700 300 748608 8.604,50 754590 8.970,20

NOVO-SIT® 700 400 748610 8.902,60 754592 9.271,90

NOVO-SIT® 700 700 748613 11.450,00 754593 11.917,90

Düker fittings

2014 price list

– 106 –



€


€

Enamel

Double socket bends NOVO-SIT® 80 11° 748814 147,10 748813 151,60

(MMK) NOVO-SIT® 100 11° 748635 168,00 748634 173,80

NOVO-SIT® 125 11° 748651 205,30 748650 211,60

NOVO-SIT® 150 11° 748667 257,40 748666 265,00

NOVO-SIT® 200 11° 748683 379,50 748682 391,20

NOVO-SIT® 250 11° 748699 506,50 748698 522,10

NOVO-SIT® 300 11° 748714 726,40 748713 749,20

NOVO-SIT® 400 11° 748735 1.490,40 748734 1.530,70

NOVO-SIT® 500 11° 748751 3.270,70 748750 3.381,90

NOVO-SIT® 600 11° 748767 4.673,30 748766 4.857,10

NOVO-SIT® 700 11° 748783 7.358,90 748782 7.651,90

NOVO-SIT® 800 11° 748799 8.267,50 748798 8.611,50

NOVO-SIT® 80 22° 748817 154,60 748816 160,90

NOVO-SIT® 100 22° 748639 175,80 748638 181,20

NOVO-SIT® 125 22° 748655 213,00 748654 220,50

NOVO-SIT® 150 22° 748671 269,50 748670 278,40

NOVO-SIT® 200 22° 748687 397,70 748686 410,50

NOVO-SIT® 250 22° 748703 532,50 748702 550,50

NOVO-SIT® 300 22° 748718 770,50 748717 796,90

NOVO-SIT® 400 22° 748739 1.585,00 748738 1.631,50

NOVO-SIT® 500 22° 748755 3.460,00 748754 3.585,20

NOVO-SIT® 600 22° 748771 4.977,00 748770 5.181,80

NOVO-SIT® 700 22° 748787 7.866,60 748786 8.194,70

NOVO-SIT® 800 22° 748802 8.470,60 748801 8.828,00

NOVO-SIT® 80 30° 748820 156,00 748819 162,10

NOVO-SIT® 100 30° 748643 178,90 748642 184,30

NOVO-SIT® 125 30° 748659 215,90 748658 223,30

NOVO-SIT® 150 30° 748675 272,50 748674 281,10

NOVO-SIT® 200 30° 748691 405,50 748690 419,40

NOVO-SIT® 250 30° 748707 543,10 748706 562,40

NOVO-SIT® 300 30° 748722 790,40 748721 819,00

NOVO-SIT® 400 30° 748743 1.626,30 748742 1.675,90

NOVO-SIT® 500 30° 748759 3.466,10 748758 3.591,10

NOVO-SIT® 600 30° 748775 5.065,40 748774 5.276,70

NOVO-SIT® 700 30° 748791 8.016,10 748790 8.355,20

NOVO-SIT® 800 30° 748806 9.363,20 748805 9.783,50

2014 price list


1. G

ate

Valv

es3.

Hyd

rant

s4.

But

terfl

y Va

lves

5. N

ovo

Plug

-in

Syst

em6.

Acc

esso

ries

7. P

ress

ure

Pipe

Fit

tings

Fl

ange

d Pr

essu

re P

ipes

Th

rust

-Res

ista

nt J

oint

s8.

Pre

ssur

e Pi

pe F

ittin

gs

wit

h N

ovo

Sock

et9.

Pre

ssur

e Pi

pe F

ittin

gs

for P

last

ic P

ipel

ines

10. P

ipe

Fitt

ings

for

Sew

age

Pipe

lines

2. S

ervi

ce C

onne

ctio

n Va

lves


Item Connection DN Length Item no. Epoxy

€


€

Enamel

Double socket NOVO-SIT® 80 90° 748870 169,90 748869 176,80

bends 90° (MMQ) NOVO-SIT® 100 90° 748828 200,20 748827 207,90

NOVO-SIT® 125 90° 748832 258,70 748831 269,30

NOVO-SIT® 150 90° 748835 315,10 748834 327,30

NOVO-SIT® 200 90° 748839 486,20 748838 505,40

NOVO-SIT® 250 90° 748843 683,40 748842 712,10

NOVO-SIT® 300 90° 748846 1.059,00 748845 1.105,50

NOVO-SIT® 400 90° 748850 2.724,80 748849 2.851,20

NOVO-SIT® 500 90° 748854 4.480,70 748853 4.675,70

NOVO-SIT® 600 90° 748858 6.361,10 748857 6.662,40

NOVO-SIT® 700 90° 748862 10.247,10 748861 10.740,90

NOVO-SIT® 800 90° 748867 10.809,60 748866 11.330,60


€


€

Enamel

Double socket bends NOVO-SIT® 80 45° 748824 160,70 748823 166,60

(MMK) NOVO-SIT® 100 45° 748647 183,20 748646 190,10

NOVO-SIT® 125 45° 748663 223,60 748662 230,70

NOVO-SIT® 150 45° 748679 281,40 748678 291,60

NOVO-SIT® 200 45° 748695 420,60 748694 435,70

NOVO-SIT® 250 45° 748710 605,70 748709 629,00

NOVO-SIT® 300 45° 748726 830,20 748725 860,70

NOVO-SIT® 400 45° 748747 1.704,10 748746 1.759,30

NOVO-SIT® 500 45° 748763 3.586,50 748762 3.720,30

NOVO-SIT® 600 45° 748779 5.279,10 748778 5.505,40

NOVO-SIT® 700 45° 748795 8.930,50 748794 9.332,90

NOVO-SIT® 800 45° 748810 9.207,60 748809 9.617,10


€


€

Enamel

Double socket tapers NOVO-SIT® 100 80 748874 173,20 748873 177,10

(MMR) NOVO-SIT® 150 80 748889 272,90 748888 280,80

NOVO-SIT® 150 100 748883 282,30 748882 291,10

NOVO-SIT® 150 125 748886 287,80 748885 299,10

NOVO-SIT® 200 100 748892 380,20 748891 391,50

NOVO-SIT® 200 125 748895 383,90 748894 400,20

NOVO-SIT® 200 150 748898 388,20 748897 399,40

NOVO-SIT® 250 125 748903 486,40 748902 507,00

NOVO-SIT® 250 150 748906 511,40 748905 527,10

NOVO-SIT® 250 200 748909 544,20 748908 559,90

NOVO-SIT® 300 150 748913 691,90 748912 714,50

NOVO-SIT® 300 200 748916 715,40 748915 736,80

NOVO-SIT® 300 250 748919 766,90 748918 789,50

Düker fittings

2014 price list

– 108 –



€


€

Enamel

Double socket tapers NOVO-SIT® 400 250 748925 1.454,90 748924 1.500,10

(MMR) NOVO-SIT® 400 300 748928 1.554,60 748927 1.602,10

NOVO-SIT® 500 300 748932 3.305,10 748931 3.428,80

NOVO-SIT® 500 400 748935 3.652,60 748934 3.778,40

NOVO-SIT® 600 400 748939 4.653,70 748938 4.826,80

NOVO-SIT® 600 500 748943 4.845,00 748942 5.053,30

NOVO-SIT® 700 600 748949 6.468,40 748948 6.738,90

NOVO-SIT® 800 600 748952 7.268,30 754594 7.588,10


€


€

Enamel

Single socket NOVO-SIT® 80 90° 748977 184,80 748976 196,00

bends 90° (MQ) NOVO-SIT® 100 90° 748956 224,50 748955 237,60

NOVO-SIT® 125 90° 748959 284,30 748958 300,00

NOVO-SIT® 150 90° 748962 365,10 748961 386,10

NOVO-SIT® 200 90° 748965 543,80 748964 574,70

NOVO-SIT® 250 90° 748968 1.445,80 748967 1.537,80

NOVO-SIT® 300 90° 748971 1.870,10 748970 1.987,30

NOVO-Grip® III, laying and dismantling equipment see page 62 – 64.

Item DN Item No. €

NOVO-SIT®

consisting of:

NOVO-SIT® ring und TYTON® sealing gasket

80 874590 30,30

100 874591 36,20

125 874593 42,70

150 874595 54,60

200 874597 75,70

250 874599 100,00

300 874601 140,40

400 874605 322,40

500 874609 590,20

600 874611 718,90

700 874613 1.108,30

800 874614 1.174,20

2014 price list


1. G

ate

Valv

es3.

Hyd

rant

s4.

But

terfl

y Va

lves

5. N

ovo

Plug

-in

Syst

em6.

Acc

esso

ries

7. P

ress

ure

Pipe

Fit

tings

Fl

ange

d Pr

essu

re P

ipes

Th

rust

-Res

ista

nt J

oint

s8.

Pre

ssur

e Pi

pe F

ittin

gs

wit

h N

ovo

Sock

et10

. Pip

e Fi

ttin

gs fo

r Se

wag

e Pi

pelin

es2.

Ser

vice

Con

nect

ion

Valv

es9.

Pre

ssur

e Pi

pe F

ittin

gs

for P

last

ic P

ipel

ines

9. Pressure Pipe Fittings for Plastic Pipelines

Düker fittings

2014 price list

– 110 –


€


€

Enamel

Flanged socket 80 750656 166,60 750655 213,00

duckfoot bends 100 750658 205,60 750657 263,40

(EN-KS) 150 750659 393,50 754657 507,70


€


€

Enamel

Flanged sockets 50 750632 45,70 750633 57,20

(E-KS) 65 750635 45,70 750634 57,20

80 750637 37,60 750636 52,00

100 750639 41,70 750638 56,30

125 750641 67,70 750640 85,10

150 750643 70,70 750642 87,90

200 750645 119,70 750644 147,00

250 750649 210,70 750648 256,80

300 750652 267,30 750651 326,30

400 750654 895,70 754545 1.125,90


€


€

Enamel

Flanged spigots 50 868900 45,80 711202 59,10

(F-KS) 65 868953 57,40 711203 72,40

80 868956 43,10 868955 56,00

100 868966 50,30 868957 64,60

125 868968 73,30 868967 93,30

150 868970 77,60 868969 97,80

200 869574 117,80 869573 146,50

250 869656 304,70 869655 380,80

300 869658 357,20 869657 446,10

400 726079 888,60 873082 1.111,60


€


€

Enamel

Double socket tees 50 50 750680 77,20 754334 105,00

with flanged branch 65 50 750681 98,60 754335 131,30

(MMA-KS) 65 65 750682 91,40 754336 122,00

80 50 750683 91,50 754337 122,10

80 65 750684 112,50 754338 148,90

80 80 750686 75,10 750685 99,60

100 50 750687 112,40 754547 148,50

100 65 750688 120,90 754339 159,80

100 80 750690 86,50 750689 118,10

100 100 750692 93,70 750691 123,80

2014 price list


1. G

ate

Valv

es3.

Hyd

rant

s4.

But

terfl

y Va

lves

5. N

ovo

Plug

-in

Syst

em6.

Acc

esso

ries

7. P

ress

ure

Pipe

Fit

tings

Fl

ange

d Pr

essu

re P

ipes

Th

rust

-Res

ista

nt J

oint

s8.

Pre

ssur

e Pi

pe F

ittin

gs

wit

h N

ovo

Sock

et10

. Pip

e Fi

ttin

gs fo

r Se

wag

e Pi

pelin

es2.

Ser

vice

Con

nect

ion

Valv

es9.

Pre

ssur

e Pi

pe F

ittin

gs

for P

last

ic P

ipel

ines


€


€

Enamel

Double socket tees 125 50 754522 193,80 754340 253,10

with flanged branch 125 65 750693 193,80 754341 253,10

(MMA-KS) 125 80 750695 122,70 750694 160,00

125 100 750697 135,60 750696 171,60

125 125 750699 150,00 750698 186,00

150 50 750701 232,00 754342 290,40

150 65 750702 232,00 754353 290,40

150 80 750704 137,00 750703 178,60

150 100 750706 138,40 750705 180,20

150 125 750707 196,30 754548 253,40

150 150 750709 180,20 750708 226,20

200 80 750711 206,30 750710 262,40

200 100 750713 226,50 750712 284,00

200 125 754540 422,50 781519 509,70

200 150 750714 275,40 754355 343,00

200 200 750715 304,10 754356 380,30

250 80 750718 593,50 750717 740,20

250 100 750720 685,70 750719 857,50

250 150 750721 741,00 754357 928,30

250 200 750722 960,80 754358 1.198,90

250 250 750723 1.139,10 754360 1.399,50

300 80 750725 661,10 750724 829,70

300 100 750726 733,50 754363 915,00

300 150 750727 880,30 750728 1.095,80

300 200 754542 1.025,80 754368 1.268,90

300 250 750729 1.061,30 754369 1.327,50

300 300 750730 1.355,80 754373 1.649,80

400 80 750731 2.839,00

400 100 750732 2.839,00

400 150 750733 3.125,10

400 200 750734 3.154,60

400 400 750735 3.556,60


€


€

Enamel

All socket tees 50 50 750736 70,20 754374 92,30

(MMB-KS) 65 50 750737 87,40 754375 114,20

65 65 750738 93,70 754376 124,10

80 50 750739 94,10 754378 127,10

80 65 750740 111,50 754379 146,50

80 80 750742 111,70 750741 135,60

100 50 750743 118,40 754382 156,50

100 65 750744 123,40 754383 164,30

100 80 750746 127,70 750745 171,30

100 100 750748 132,60 750747 176,80

125 50 750749 169,90 754384 222,50

125 65 750750 181,00 754385 234,20

125 80 750751 180,70 754408 229,70

125 100 750753 191,90 750752 244,80

125 125 750754 197,20 754409 250,50

Düker fittings

2014 price list

– 112 –


€


€

Enamel

All socket tees 150 50 750755 238,70 754410 299,70

(MMB-KS) 150 65 750756 237,50 754411 304,80

150 80 750757 233,50 754412 294,00

150 100 750759 215,90 750758 269,20

150 125 750760 282,20 754413 356,00

150 150 750762 262,60 750761 329,40

200 80 750763 356,20 754414 445,20

200 100 750765 341,20 750764 429,30

200 125 750766 562,10 754415 705,70

200 150 750767 429,50 754549 538,40

200 200 750768 637,20 754418 795,00

Item DN Outlet drilling Item no. Epoxy

€


€

Enamel

Double sockets with 50 2" 754544 109,40 754464 142,40

internal threaded 65 2" 750775 126,20 754465 166,00

branch (MMI-KS) 80 2" 750779 104,00 754466 135,30

100 2" 750784 128,50 750783 167,30

125 2" 750788 296,70 754467 385,70

150 2" 750793 210,20 750792 273,50

200 2" 750797 330,20 754550 430,30

250 2" 750798 861,60 754468 1.120,10

300 2" 750799 1.092,00 754470 1.417,70


€


€

Enamel

Double socket tapers 65 50 750801 56,20 754471 73,00

(MMR-KS) 80 50 750803 63,90 750802 87,10

80 65 750804 69,30 754473 88,90

100 50 750805 76,70 754475 97,70

100 65 750806 74,20 754480 97,70

100 80 750808 79,20 750807 106,90

125 80 750809 118,10 754551 151,60

125 100 750811 118,10 750810 151,60

150 80 750813 134,90 750812 176,50

150 100 750815 146,10 750814 190,40

150 125 750817 148,60 750816 193,00

200 100 750819 215,90 750818 276,20

200 125 750821 265,20 750820 338,70

200 150 750823 243,80 750822 311,20

250 100 750824 450,40 754481 566,70

250 150 750825 450,40 754482 566,70

250 200 750827 513,40 750826 631,90

2014 price list


1. G

ate

Valv

es3.

Hyd

rant

s4.

But

terfl

y Va

lves

5. N

ovo

Plug

-in

Syst

em6.

Acc

esso

ries

7. P

ress

ure

Pipe

Fit

tings

Fl

ange

d Pr

essu

re P

ipes

Th

rust

-Res

ista

nt J

oint

s8.

Pre

ssur

e Pi

pe F

ittin

gs

wit

h N

ovo

Sock

et10

. Pip

e Fi

ttin

gs fo

r Se

wag

e Pi

pelin

es2.

Ser

vice

Con

nect

ion

Valv

es9.

Pre

ssur

e Pi

pe F

ittin

gs

for P

last

ic P

ipel

ines

10. Pipe Fittings for Sewage Pipelines

Düker fittings

2014 price list

– 114 –

Item Socket Type

DN1 DN2 Angle Item no. Epoxy

€

Epoxy

SM 90 clay pipe socket 250 - 300 150 90° 758433 86,40

clay pipe socket 350 150 90° 758434 86,40

clay pipe socket 400 - 600 150 90° 758435 96,70

clay pipe socket 700 - 1200 150 90° 758436 96,70

Drilling saddle piece for cast iron, steel or fibre cement pipe90° branch with clay pipe socket and NBR sealing

Item Socket Type


€

Epoxy

SI 90 spigot end 250 - 300 150 90° 758445 67,80

spigot end 400 - 600 150 90° 758447 88,40

spigot end 700 - 1200 150 90° 758446 88,40

spigot end 300 200 90° 758441 96,70

spigot end 350 200 90° 758453 96,70

spigot end 400 200 90° 758454 96,70

spigot end 500 - 600 200 90° 758452 96,70

spigot end 700 - 800 200 90° 758443 96,70

spigot end 900 - 1200 200 90° 758444 96,70

Drilling saddle piece for cast iron, steel or fibre cement pipe90° branch with spigot for clay pipe

Item Socket Type


€

Epoxy

SM 45 clay pipe socket 250 - 300 150 45° 760498 123,30

clay pipe socket 350 - 400 150 45° 760499 123,30

Drilling saddle piece for cast iron, steel or fibre cement pipe45° branch with clay pipe socket and NBR sealing

Item Socket Type


€

Epoxy

SI 45 spigot end 250 - 300 150 45° 760500 119,60

Drilling saddle piece for cast iron, steel or fibre cement pipe45° branch with spigot for ductile iron pipe

Item Socket Type


€

Epoxy

SI 90 spigot end 250 - 300 150 90° 758448 67,80

spigot end 400 - 600 150 90° 758450 88,40

spigot end 700 - 1200 150 90° 758449 88,40

spigot end 300 200 90° 758437 96,70

spigot end 350 200 90° 765380 96,70

spigot end 400 200 90° 758439 96,70

spigot end 500 - 600 200 90° 758451 96,70

spigot end 700 - 800 200 90° 758440 96,70

spigot end 900 - 1200 200 90° 758438 96,70

Drilling saddle piece for cast iron, steel or fibre cement pipe90° branch with spigot for ductile iron pipe

2014 price list


1. G

ate

Valv

es3.

Hyd

rant

s4.

But

terfl

y Va

lves

5. N

ovo

Plug

-in

Syst

em6.

Acc

esso

ries

7. P

ress

ure

Pipe

Fit

tings

Fl

ange

d Pr

essu

re P

ipes

Th

rust

-Res

ista

nt J

oint

s8.

Pre

ssur

e Pi

pe F

ittin

gs

wit

h N

ovo

Sock

et10

. Pip

e Fi

ttin

gs fo

r Se

wag

e Pi

pelin

es2.

Ser

vice

Con

nect

ion

Valv

es9.

Pre

ssur

e Pi

pe F

ittin

gs

for P

last

ic P

ipel

ines

Item SocketType

DN1 Item no. Epoxy

€

Epoxy

MM TYT 150 788333 68,90

TYT 200 788332 84,40

TYT 250 788335 112,20

TYT 300 788336 180,40

TYT 350 788337 251,60

TYT 400 788340 306,70

TYT 500 788341 426,10

TYT 600 788342 540,80

TYT 700 788343 860,80

TYT 800 788344 1.422,80

TYTON® coupling with TYTON® NBR seals

Item DN1 DN2 Angle Item no. Epoxy

€

Epoxy

ICI 200 150 67° 757124 145,60

Spigot end branch

Item SocketType1

SocketType2


€

Epoxy

MMI 67 TYT spigot end 200 150 67° 757126 257,60

Double socket branch with TYTON® sockets, branch with spigot for ductile iron pipe

Item SocketType1

SocketType2


€

Epoxy

MMI 45 TYT spigot end 200 150 45° 710644 257,60

Double socket branch with TYTON® sockets,branch with spigot for clay pipe

Item SocketType1

SocketType2


€

Epoxy

MMM TYT clay pipe socket 200 150 45° 870045 266,60

Double socket branch with TYTON® sockets,branch with clay pipe socket and NBR sealing

Düker fittings

2014 price list

– 116 –

Item DN2 Item no. Epoxy

€

Epoxy

RVD 150 590029 48,00

Pipe sealing cap complete

Item SocketType

DN1 Item no. Epoxy

€

Epoxy

SA TYT 150 750534 41,60

TYT 200 750535 46,90

TYT 250 750536 72,80

TYT 300 750537 93,70

TYT 400 750538 166,80

TYT 500 750539 262,20

TYT 600 750540 332,40

TYT 700 788348 567,90

TYT 800 788349 780,90

TYT 900 788350 1323,60

TYT 1000 788351 1667,50

Manhole connection piece with TYTON® socketand TYTON® NBR sealing

Item DN1 Item no. Epoxy

red

€

Epoxyred

Item no. Epoxyblue

€

Epoxyblue

Double flanged 80 767317 517,70 767318 517,70

hatchbox 100 767321 561,90 767320 561,90

125 767409 669,80 776882 669,80

150 767416 616,10 767412 616,10

200 767431 880,10 767430 880,10

250 767438 1148,50 754673 1148,50

300 767456 1420,50 767455 1420,50

350 767472 1635,70 754674 1635,70

400 767475 2173,30 767474 2173,30

500 767479 2575,30 754676 2575,30

Hatchbox with TYTON® sockets:on request

Item SocketType1

SocketType2


€

Epoxy

MMC TYT TYT 100 100 45° 788058 158,10

TYT TYT 150 100 45° 788059 214,90

TYT TYT 150 150 45° 788061 192,20

TYT TYT 200 150 45° 788062 244,70

TYT TYT 200 200 45° 788063 252,20

Double socket pieces with 45° socket branch

2014 price list


1. G

ate

Valv

es3.

Hyd

rant

s4.

But

terfl

y Va

lves

5. N

ovo

Plug

-in

Syst

em6.

Acc

esso

ries

7. P

ress

ure

Pipe

Fit

tings

Fl

ange

d Pr

essu

re P

ipes

Th

rust

-Res

ista

nt J

oint

s8.

Pre

ssur

e Pi

pe F

ittin

gs

wit

h N

ovo

Sock

et10

. Pip

e Fi

ttin

gs fo

r Se

wag

e Pi

pelin

es2.

Ser

vice

Con

nect

ion

Valv

es9.

Pre

ssur

e Pi

pe F

ittin

gs

for P

last

ic P

ipel

ines

– 118 – Düker fittings and valves

§ 1 Scope

Our general terms of sale apply exclusively; we do not recognize any conditions to the con-trary or in deviation of our terms of sale, unless we have explicitly agreed to their validity in writing. All agreements made between us and the buyer regarding the execution of the underlying agreement are recorded in writing in this agreement.

§ 2 Quotes and prices

Our quotes are always subject to change and without obligation. Orders are only consi-dered accepted following our written order confirmation. We reserve the right to change our prices appropriately if cost increases or reductions shall occur after the conclusion of this contract. We will present these to the buyer upon request. The buyer is entitled to withdraw if the price increases are verifiably in excess of the increase of the general cost of living.

§ 3 Execution of shipments

Images and sketches on which the order is placed are not binding for the execution. We reserve the right to make relevant changes and improvements. The dimensions and weights stated are only approximate values. This does not apply if it has been explicitly agreed upon in writing that parts were made following the special drawings and instruc-tions of the buyer. Excess or short weight within the scope of customary tolerances do not qualify for price reductions or complaints. We are entitled to carry out partial deliveries.

§ 4 Delivery time

1. The start of the delivery time stated by us requires the clarification of all technical que-stions. The adherence to our delivery commitment further requires the timely and proper fulfillment of the buyer’s obligation. The delivery term does not start before the production of all information, documents, permits, approvals to be provided by the buyer as well as all other requirements to be supplied by the buyer.

2. In the event of force majeure such as turmoil, measures within the context of labor disputes, in particular strike and lockout, we are entitled to postpone the delivery and shipment for the period of the interference plus an appropriate start-up time or, according to our choice to withdraw from the contract due to a part of it not yet being fulfilled. Any circumstances making the shipment significantly difficult for us are considered to be on the same level as force majeure, regardless of whether they incur in our own facilities or those of a sub-supplier. The buyer is entitled to ask us for a written explanation whether we wish to withdraw or deliver within an appropriate grace period. We are entitled to two-week’s notice upon receipt of the request for submitting a written explanation. Failure to submit such an explanation permits the buyer to withdraw from the contract to the extent where this has not been fulfilled yet.

3. If the buyer falls in default of acceptance or is guilty of violating other duties to cooperate, we are entitled to demand indemnification for the loss we incur. In the event of default of acceptance, the risk of accidental destruction or accidental deterioration of the object of the sale passes to the buyer.

§ 5 Payments

1. Our invoices are due within 30 days upon invoice date and delivery without any deductions. Exceeding the stipulated payment deadline will result in interest being charged on arrears in the amount of the statutory interest rate starting on the due date. We reserve the right to enforce higher interest, verifiably paid by us and any additional damages.

2. If the buyer fails to fulfill his obligation to pay in due time or incompletely, all receivables existing at that time will become due immediately considering the incurrence of the interest stated above. In this case, we are entitled to withhold our services from entered agreements until the fulfillment of the entire due return service, or, following fixing an appropriate time limit, to refuse further contractual performance, to claim damages or withdraw from the contract.

3. If we become aware of any facts pointing out a decreased creditworthiness of the ordering party, we are entitled to ask for securities regarding the present or any future receivables. As long as we do not gain evidence of the elimination of such circumstances, all unfulfilled contracts shall be executed in our discretion against pre-payment or cash on delivery. The buyer is only entitled to retention or offsetting if their counter claims are undisputed or legally established.

§ 6 Packaging and shipment

All shipments are made on the account and risk of the buyer, even in the case of carriage-free delivery. We have the right to choose the dispatch route, mode of transport and type of packaging.

§ 7 Notice of defect and warranty

1. The buyer must inspect the goods immediately upon receipt. Any notice of defect also with regard to shortages and mistaken deliveries are to be communicated to us in writing within one week upon detection. This also applies to defects which despite careful inspection cannot be detected at first. Any further processing is to be stopped immediately once a defect has been detected. We must be given the opportunity to determine the defect reported through a representative on-site. Any parts forming the subject of the complaint are to be returned to us upon request. If the goods are defective, we may decide in our own discretion to either eliminate the defect or to deliver a defect-free object. A requirement for our defect liability is the fact that the defect is not a negligible defect. If either one or both of the ways of subsequent performance are impossible or unreasonable, we are entitled to refuse said performance.

2. The same applies if the buyer does not fulfill their payment obligation to us in an extent which corresponds to the defect free part of the service rendered. If the subsequent performance is not possible or if it should fail, the buyer may decide to either reduce the purchase price accordingly or to withdraw from the contract according to the statutory regulations. This applies in particular in the event of culpable delay or refusal of subsequent performance even if it should fail the second time in a row. The above regulations shall also apply regarding the delivery of another object or a lower quantity

3. We are liable according to the statutory regulations if the buyer claims damages which are based on intent and gross negligence. To the extent where we are not accused of intentional breach of contract, the liability for damages is limited to typical foreseeable-occurring damages.

4. We are liable according to the legal requirements to the extent where we are culpable of violating a material contractual obligation. In this case, however, the liability for damages is limited to the typical foreseeable occurring damage. The liability for tortuous injury to life, limb or health shall remain unaffected thereof. The same applies to mandatory liability according to the product liability law. Unless otherwise agreed herein above, liability is excluded. The statute of limitation for claims for defects is 12 months starting with the passage of risk.

§ 8 Retention of title

1. We reserve the right of retention of title of the object of sale until all payments of the busi-ness relationship are received. In the event of contract violating behavior of the customer, in particular regarding delayed payment, we are entitled to take back the object of sale. Following the withdrawal of the object of sale, we are entitled to its utilization.

2. The buyer is obligated to treat the object of sale with care. He is particularly obligated to sufficiently insure the object of sale at his own cost and in the replacement value. The customer must inform us immediately in the event of seizures or other third party interventions.

3. The buyer is entitled to resell the object of sale within the context of an ordinary business transaction He already now, however, assigns all claims in the amount of the invoice total including VAT of our receivables which they are entitled to claim from his buyers or third parties as a result of the resale, and regardless of the fact if the object of sale was sold without or after further processing. The buyer continues to remain entitled to collect this claim even after its assignment. Our right of collection of the claim ourselves shall remain unaffected hereof. Should the customer be in payment default or submit an application to institute insolvency proceedings, we have the right to demand that the customer reveal the assigned claims and their debtors, make all statements necessary for the collection, hand out the pertaining documents and inform the debtors (third parties) of the assignment.

4. If the object of sale is further processed, connected or inseparably mixed with another object not belonging to us, we acquire co-ownership of the new object in relation of the value of the object of sale to the other, processed objects at the time of processing. The object created as a consequence of further processing in any case is subject to the same conditions as objects of sale delivered with reservation.

§ 9 General regulations

1. Drawings, samples, models, cost estimates and the likes continue to fall under our property and copyright. Such documents must not be made available to any third parties without our explicit consent. All contractual partners of the buyer must be bound by contract accordingly.

2. Any orders involving the customer instructing us of certain features and properties especial-ly with regard to engineering, are backed up by the customer ensuring that such instructions do not interfere with third party industrial property rights. In the event of use, the buyer keeps us indemnified against all claims in this respect.

3. All contracts between us and the buyer shall be exclusively subject to the laws of the Federal Republic of Germany and to the exclusion of the Vienna Convention on Contracts for the International Sale of Goods (CISG).

4. Place of performance for all liabilities arising from this contract, in particular delivery and payment is our respective supplying plant. Exclusive legal venue, also for all actions related to checks and bills of exchange is Aschaffenburg, Germany.

Düker GmbH & Co. KGaA

General terms and conditions of delivery and payment

01.2014 Subject to technical modifications and typing errors.

düker gmbH & Co. Kgaa

Hauptstraße 39 – 41d-63846 laufach

Tel. +49 6093 87-560Fax +49 6093 87-246

internet: www.dueker.dee-mail: [email protected]

FiTTiNgS aNd valveS

dRaiNage TeCHNOlOgY

eNgiNeeRiNg

glaSS liNiNg TeCHNOlOgieS

JOBBiNg FOUNdRY

VFA Pricelist.pdf

Documents

Transcript of VFA Pricelist.pdf