Vessel Data Sheet MULTI- CARTRIDGE BAND-CLAMP LIQUID ...
1
Rev. 09/02/10 Optimum Filter, Inc. • 3725 Interpark Drive • Colorado Springs, CO 80907 Phone: (719) 260-5694 • Fax: (719) 260-5944 • www.optimumfilter.com Contaminated Fluid (Inlet) Clean Fluid (Outlet) Clean Drain Gauge Port Gauge / Dirty Drain Port V-Post DOE Cartridge Heavy - Duty Band -Clamp FIN - End Cartridge MULTI- CARTRIDGE BAND-CLAMP LIQUID VESSELS GTCHB Series Features: GTCHB Series Multi-round Cartridge Vessels are designed for industrial and commercial applications. Vessels are constructed of 304 or 316 stainless steel and accept DOE,-222/FLA T, and -222/FIN end cartridges in 10”, 20” , 30” & 40” nominal lengths. • Single o-ring design (Buna-N standard) • Easy-access self-centering heavy-duty band-clamp closure • 316 stainless steel universal seal cups and compression plates allow vessels to accept DOE, -222/FLA T , or -222/FIN-end cartridges • 304 & 316 stainless steel construction • Poly-coat finish (exterior only) • 150 PSI pressure rating • Heavy-duty welded mounting/support legs • 316 stainless steel cap/spring assemblies and v-posts Vessel Data Sheet GTCHB #of Cartridges Length Inlet/Outlet Size Material Pressure Rating Ordering Information Surface Finish 4=4 5=5 7=7 12=12 22=22 1=10” 2=20” 3=30” 4=40” 2=2” 3=3” 4=4” 4=304 SS 6=316 SS PC= Poly-coat Inlet/Outlet Type M=MNPT F=RF Flange T=TC Sanitary Outlet Configuration 2=Opposite outlet Vent Options: • Alternate seal materials • Sanitary porting 15 =150 PSI @ 250º F
Transcript of Vessel Data Sheet MULTI- CARTRIDGE BAND-CLAMP LIQUID ...
Rev. 09/02/10Optimum Filter, Inc. • 3725 Interpark Drive • Colorado Springs, CO 80907Phone: (719) 260-5694 • Fax: (719) 260-5944 • www.optimumfilter.com
ContaminatedFluid
(Inlet)
Clean Fluid(Outlet)
Clean Drain
Gauge Port
Gauge / DirtyDrain Port
V-Post
DOE Cartridge
Heavy - DutyBand -Clamp
FIN - EndCartridge
MULTI- CARTRIDGE BAND-CLAMP LIQUID VESSELSGTCHB Series
Features:
GTCHB Series Multi-round Cartridge Vessels are designed for industrial and commercialapplications. Vessels are constructed of 304 or 316 stainless steel and accept DOE,-222/FLAT, and -222/FIN end cartridges in 10”, 20”, 30” & 40” nominal lengths.
• Single o-ring design (Buna-N standard)• Easy-access self-centering heavy-duty band-clamp closure• 316 stainless steel universal seal cups and compression plates allow vessels to accept DOE, -222/FLAT, or -222/FIN-end cartridges • 304 & 316 stainless steel construction• Poly-coat finish (exterior only)• 150 PSI pressure rating • Heavy-duty welded mounting/support legs• 316 stainless steel cap/spring assemblies and v-posts
Vessel Data Sheet
GTCHB #ofCartridges Length Inlet/Outlet
Size Material PressureRating
Ordering Information
Surface Finish
4=4
5=5
7=7
12=12
22=22
1=10”
2=20”
3=30”
4=40”
2=2”
3=3”
4=4”
4=304 SS
6=316 SS
PC= Poly-coat
Inlet/OutletType
M=MNPT
F=RF Flange
T=TC Sanitary
Outlet Configuration
2=Opposite outlet
Vent
Options: • Alternate seal materials• Sanitary porting
15 =150 PSI @ 250º F
