VERTICAL MOUNT CARD GUIDES - Above Board Electronics · Vertical Mount Card Guide Item Accepts PCB...
Transcript of VERTICAL MOUNT CARD GUIDES - Above Board Electronics · Vertical Mount Card Guide Item Accepts PCB...
.075
1II .118 (3) Channel Depth x2 (1.9)
.31 (8) Ref.
til
.31 (8) Ref.
.118 (3) Channel Depth x2
472(12)
Fig. 3
VMCGE Vertical Mount Card Guide
Cutout Needed Only for Fig. 2
PCB Hole Locations
M3 x .05 Threaded Metal Insert
.228(5.8)
0.087 (2.2) Recommended
.28 (7)
.14 (3.5) Min.
Patent 6,547,082
M3 x 0.5 Threaded .472 (12) Metal Insert
0.063 (1.8) .24 (8)
Fig. 1 Fig. 2
• Locking pin holds boards in place. To engage or disengage, simply press with finger • Double channel permits side-by-side mounting • Includes mounting hardware: screw, washer and lock washer • Material: Card Guide: GF Nylon 6; Color: Grey; Locking Mechanism: HDPE; Color: Black,
Metal Pin: Stainless Steel; Screws: Mild Steel, Zinc Plated; Washers: Stainless Steel; Threaded Insert: Brass
• Mounting Hole Panel Thickness: Up to .125 (3.18) with M3 Screw (provided)
"A" "B" "C" "D" "E" Fl.. Accepts PCB
Thickness Bulk Peck
1.83 (46.5) 1.65 (42.0) .71 (18) .104 (2.6) .105 (2.7) 1 .062 (1.6) 100 2.56 (65.0) 2.22 (56.5) .71 (18) .118 (3) .079 (2) 1 .062 (1.6) 100 2.76 (70.1) 2.44 (62.5) .22 (5.6) 2 .062 (1.6) 100 3.54 (90) 3.21 (81.5) .71 (18) .118 (3) .079 (2) 1 .062 (1.6) 100 3.94 (100) 3.62 (92) .35 (8.9) 2 .062 (1.6) 100 5.31 (135) 4.98 (126.5) .75 (19) .118 (3) .079 (2) 1 .062 (1.6) 100 6.30 (160) 4.43 (112.5) .75 (19) .118 (3) .079 (2) 1 .062 (1.6) 100 4.73 (120) 4.43 (112.5) .71 (18) 3 .062 (1.6) 100 4.73 (120) 4.43 (112.5) .71 (18) .118 (3) .079 (2) 1 .062 (1.6) 100 6.30 (160) 4.43 (112.5) .75 (19) 3 .062 (1.6) 100
echcci
29 (74)
M3 x 0.5 Threaded Metal Insert
.079 (2)
Item No.
VMCG-50-MPBK-K VMCG-65-MPBK-K VMCG-70-MPBK-K VMCG-90-MPBK-K
VMCG-100-MPBK-K VMCG-135-MPBK-K VMCG-160-MPBK-K VMCG-320-MPBK-K VMCG-330-MPBK-K VMCG-360-MPBK-K
.24 (6.1)
.29 .24 (6)
(74)
-1- .31(8) Ref. r .45 (11.5)
f.12(3)
PCB & ELECTRONICS HARDWARE Buy One or Buy Bulk&SNE
VERTICAL MOUNT CARD GUIDES
VMCG Vertical Mount Card Guides
.16 (4) -.1
.35 (9)
.02 (0.5)
.22 (5.5)1
.375 (9.5)
.279 (7.1)
I Mounting Hole:
Snap-lock into
1.12 (28.5) .216 (5.5) dimensions
.067A (1.7) Panel Thickness:
.216 (5.5) .047 - .071 (1.2 - 1.8)
_L_ Hole Mounting
.26 (6.6) .06 (1.5) Detail
• Quick way to run a PC board to the chassis • Material: UL94 V-2 Nylon 6/6 • Color: Natural
Item Bulk Pack No. Accepts PCB Thickness Qty.
VMCGE-30M-01 .062 (1.6)
1,000
-OT11.indd 704
11/6/2013 4:28:44 PM
More Choice Free Samples Ships Today [email protected] Choice Free Samples Ships Today [email protected] Choice Free Samples Ships Today [email protected] Choice Free Samples Ships Today [email protected]
VERTICAL MOUNT CARD GUIDES
Patent 6,547,082
VMCGEVertical Mount Card Guide
Item No. Accepts PCB Thickness
Bulk Pack Qty.
VMCGE-30M-01 .062 (1.6) 1,000
Mounting Hole:Snap-lock into
dimensions
Panel Thickness:.047 - .071 (1.2 - 1.8)
Mounting HoleDetail
• Quick way to run a PC board to the chassis• Material: UL94 V-2 Nylon 6/6• Color: Natural
VMCGVertical Mount Card Guides
Fig. 1 Fig. 2
Fig. 3
Item No. “A” “B” “C” “D” “E” Fig.
Accepts PCB Thickness
Bulk Pack Qty.
VMCG-50-MPBK-K 1.83 (46.5) 1.65 (42.0) .71 (18) .104 (2.6) .105 (2.7) 1 .062 (1.6) 100VMCG-65-MPBK-K 2.56 (65.0) 2.22 (56.5) .71 (18) .118 (3) .079 (2) 1 .062 (1.6) 100VMCG-70-MPBK-K 2.76 (70.1) 2.44 (62.5) .22 (5.6) - - 2 .062 (1.6) 100VMCG-90-MPBK-K 3.54 (90) 3.21 (81.5) .71 (18) .118 (3) .079 (2) 1 .062 (1.6) 100
VMCG-100-MPBK-K 3.94 (100) 3.62 (92) .35 (8.9) - - 2 .062 (1.6) 100VMCG-135-MPBK-K 5.31 (135) 4.98 (126.5) .75 (19) .118 (3) .079 (2) 1 .062 (1.6) 100VMCG-160-MPBK-K 6.30 (160) 4.43 (112.5) .75 (19) .118 (3) .079 (2) 1 .062 (1.6) 100VMCG-320-MPBK-K 4.73 (120) 4.43 (112.5) .71 (18) - - 3 .062 (1.6) 100VMCG-330-MPBK-K 4.73 (120) 4.43 (112.5) .71 (18) .118 (3) .079 (2) 1 .062 (1.6) 100VMCG-360-MPBK-K 6.30 (160) 4.43 (112.5) .75 (19) - - 3 .062 (1.6) 100
Patent 6,547,082
PCB Hole Locations
Cutout Needed Only for Fig. 2
• Locking pin holds boards in place. To engage or disengage, simply press with finger• Double channel permits side-by-side mounting• Includes mounting hardware: screw, washer and lock washer• Material: Card Guide: GF Nylon 6; Color: Grey; Locking Mechanism: HDPE; Color: Black,
Metal Pin: Stainless Steel; Screws: Mild Steel, Zinc Plated; Washers: Stainless Steel; Threaded Insert: Brass
• Mounting Hole Panel Thickness: Up to .125 (3.18) with M3 Screw (provided)
Pages 0702 - 0711.indd 704 11/6/2013 4:28:44 PM
Threaded Accepts PCB Bulk Pack "B" Insert Fl.. Thickness Q .
Item No. "A'
.079 (2)
.079 (2)
.079 (2)
.079 (2)
.079 (2)
.079 (2)
.079 (2)
.079 (2)
M3 4-40 M3 4-40 M3 4-40 M3 4-40
1 1
2 + 3 2 + 3
1 1
2 + 3 2 + 3
100 100 100 100 100 100 100 100
VMCGN65-M3-L-K 2.56 (65) 2.24 (57) VMCGN65-440-L 2.56 (65) 2.24 (57)
VMCGN105-M3-L-K 4.13 (105) 3.82 (97) VMCGN105-440-L 4.13 (105) 3.82 (97)
VMCGN120-M3-L-K 4.72 (120) 4.41 (112) VMCGN120-440-L 4.72 (120) 4.41 (112)
VMCGN160-M3-L-K 6.30 (160) 5.98 (152) VMCGN160-440-L 6.30 (160) 5.98 (152)
Pages 0702 - 0711.indd 705
.216 (5.5) .0673- (1.7)
.216 (5.5)
Item No.
Bulk Pack Qty. Accepts PCB Thickness
1,000 .062 (1.6) VMCGLE-31M-01
PCB & ELECTRONICS HARDWARE
VERTICAL MOUNT CARD GUIDES
se -8- .119 (0)
.119 (3) 2X (Channel Depth)
1.57 (40) PCB Locking
Pin
a Extension Lock Pin
F'g. 3 Extension
Fig. 1 Fig. 2 Base Base
Fig 2 + Fig. 3 Assembly
079 (2)-
PC Board
0.087(2.2) Recommended -.228 (5.8)
.3 (8) Ref.
.71 (18)
.472 (12)
PCB Hole Locations
VMCGN Vertical Mount Card Guides
Patent 6,547,082
I _i M3 or 4-40 Threaded
Metal Inserts
.078 (2)
24 (6
• Locking pin holds boards in place. To engage or disengage, simply press with finger
• Double channel permits side-by-side mounting • Part numbers ending in -K include M3 screw, washer and
lock washer mounting hardware • Material: Card Guide: UL94 V-0 Polystyrene, Color: Blue;
Locking Mechanism: Acetal, Color: White; Screws: Mild Steel, Zinc Plated; Washers: Stainless Steel;
• Threaded Insert: Brass
Note: No.'s ending in -K include mounting hardware
.10 (2.5)
.070 (1.8)
.37 (9.5)
.10(2.5)
.99 (25.1)
E-.20 (5.1)
.99
.06 (1.5) .26 (6.6)
.22 (5.5)
1.25 (31.8) Ref.
(25.2)
Typical Board Cutout • Board is held in place by locking tab • Mounts into a square hole to prevent rotation • Board is easily released • Material: UL94 V-2 Nylon 6/6 • Color: Natural
VMCGLE Vertical Mount Card Guide Latched
.279 (7.1)
Mounting Hole: Snap-lock into above dimensions Panel Thickness: 047 - .071 (1.2 - 1.8)
Mounting Hole Detail
705Phone: 800 530 9444 Fax: 800 393 0323 www.essentracomponents-toolsupply.comPhone: 800 621 1892 Fax: 773 539 6770 www.essentracomponents.comPhone: 800 551 2052 Fax: 866 642 4115 www.essentracomponents.comPhone: 800 847 0486 Fax: 866 561 6617 www.essentracomponents.com
VERTICAL MOUNT CARD GUIDES
Fig. 2 Base
Fig. 3 Extension
Fig 2 + Fig. 3 Assembly
Fig. 1 Base
Item No. “A’ “B”
Threaded Insert Fig.
Accepts PCB Thickness
Bulk PackQty.
VMCGN65-M3-L-K 2.56 (65) 2.24 (57) M3 1 .079 (2) 100VMCGN65-440-L 2.56 (65) 2.24 (57) 4-40 1 .079 (2) 100
VMCGN105-M3-L-K 4.13 (105) 3.82 (97) M3 2 + 3 .079 (2) 100VMCGN105-440-L 4.13 (105) 3.82 (97) 4-40 2 + 3 .079 (2) 100
VMCGN120-M3-L-K 4.72 (120) 4.41 (112) M3 1 .079 (2) 100VMCGN120-440-L 4.72 (120) 4.41 (112) 4-40 1 .079 (2) 100
VMCGN160-M3-L-K 6.30 (160) 5.98 (152) M3 2 + 3 .079 (2) 100VMCGN160-440-L 6.30 (160) 5.98 (152) 4-40 2 + 3 .079 (2) 100
Patent 6,547,082 PCB Hole Locations
• Locking pin holds boards in place. To engage or disengage, simply press with finger
• Double channel permits side-by-side mounting• Part numbers ending in -K include M3 screw, washer and
lock washer mounting hardware• Material: Card Guide: UL94 V-0 Polystyrene, Color: Blue;
Locking Mechanism: Acetal, Color: White; Screws: Mild Steel, Zinc Plated; Washers: Stainless Steel;
• Threaded Insert: Brass
VMCGNVertical Mount Card Guides
Note: No.’s ending in -K include mounting hardware
VMCGEVertical Mount Card Guide
Mounting Hole: Snap-lock into above dimensionsPanel Thickness:047 - .071 (1.2 - 1.8)
Mounting HoleDetail
Item No. Accepts PCB Thickness
Bulk Pack Qty.
VMCGLE-31M-01 .062 (1.6) 1,000
VMCGLEVertical Mount Card Guide Latched
Typical Board Cutout• Board is held in place by locking tab• Mounts into a square hole to prevent rotation• Board is easily released• Material: UL94 V-2 Nylon 6/6• Color: Natural
Pages 0702 - 0711.indd 705 11/6/2013 4:28:49 PM
Buy One or Buy Bulk&SNE
PCB & ELECTRONICS HARDWARE
VERTICAL MOUNT CARD GUIDES
echcci CBG Circuit Board Guide
Mounting Hole: Snap-lock: .175 x .310 (4.45 x 7.87) Rectangular Hole
11/6/2013 4:28:52 PM
• Vertical mount for boards of any width • Double channel permits side-by-side mounting • PC board easily slides in and out • Material: UL94 V-2 Nylon 6/6 • Color: Natural
Panel Thickness: .030 - .070 (0.76 - 1.78)
Item No. "A"
Accepts PCB Thickness
CBG-1-01 1.0 .062 CBG-1.5-01 1.5 38.1 .062 1.6 CBG-2-01 2.0
12
7
5.41
50.8 .062
F1.61
1.6 CBG-3-01 3.0 6.2 .062 1.6
LCBG Locking Circuit Board Guide .34 -.075 (1.9)
(8.7) .125 (3.2) (3.8)
EOM ENE
.27 (6.9)
eichco
V 9/16 (14.3) - Ref.
Mounting Hole: Snap-lock: .175 x .310 (4.45 x 7.87) Rectangular Hole
Panel Thickness: .030 - .070 (0.76 - 1.78)
Item No. "A" Accepts PCB Thickness
LCBG-1-01 .880 (22.4) .062 LCBG-1.5-01 1.375 (34.9) .062 1.6 LCBG-2-01 1.870 (47.5)
[1.6)
.062 1.6 LCBG-3-01 2.875 (73) .062 1.6
LCBG-T Releasable Locking Circuit Board Guide
(4.1-)1 .16
13 (3.2) Min.
.34 (8.7)
f.125 (3.2)
Min
ENE ENE
"13"
V Typical Board Cutout
rrichcci
Mounting Hole: Snap-lock: .175 x .310 (4.45 x 7.87) Rectangular Hole
Panel Thickness: .030 - .070 (0.76 - 1.78)
Item No. "A" "B"
Accepts PCB Thickness
Bulk Peck Qty.
LCBG-1T-01 .880 (22.4) .865 (22) .062 1.6 100 LCBG-1.5T-01 1.37534.9( .062 1.6 100 LCBG-2T-01 1.870 (47.5)
1.360 -34.1 1.855 47.1 .062 1.6 100
LCBG-3T-01 2.875 (73) 2.860 72.6 .062 1.6 100
Bulk Peck Qty. 100 100 100 100
• Locking tabs hold board in place. • Vertical mount for boards of any width • Double channel permits side-by-side mounting • Material: UL94 V-2 Nylon 6/6 • Color: Natural
Bulk Pack Qty.
100 100 100 100
• Double channel permits side-by-side mounting • Board is held in place by locking tab • Board is easily released • Material: UL94 V-2 Nylon 6/6 • Color: Natural
More Choice Free Samples Ships Today [email protected] Choice Free Samples Ships Today [email protected] Choice Free Samples Ships Today [email protected] Choice Free Samples Ships Today [email protected]
VERTICAL MOUNT CARD GUIDES
CBGCircuit Board Guide
Item No. “A”
Accepts PCBThickness
Bulk Pack Qty.
CBG-1-01 1.0 (25.4) .062 (1.6) 100CBG-1.5-01 1.5 (38.1) .062 (1.6) 100CBG-2-01 2.0 (50.8) .062 (1.6) 100CBG-3-01 3.0 (76.2) .062 (1.6) 100
Mounting Hole: Snap-lock: .175 x .310 (4.45 x 7.87) Rectangular Hole
Panel Thickness: .030 - .070 (0.76 - 1.78)• Vertical mount for boards of any width• Double channel permits side-by-side mounting• PC board easily slides in and out• Material: UL94 V-2 Nylon 6/6• Color: Natural
Item No. “A” Accepts PCB Thickness
Bulk Pack Qty.
LCBG-1-01 .880 (22.4) .062 (1.6) 100LCBG-1.5-01 1.375 (34.9) .062 (1.6) 100LCBG-2-01 1.870 (47.5) .062 (1.6) 100LCBG-3-01 2.875 (73) .062 (1.6) 100
Mounting Hole: Snap-lock: .175 x .310 (4.45 x 7.87) Rectangular Hole
Panel Thickness: .030 - .070 (0.76 - 1.78)• Locking tabs hold board in place.• Vertical mount for boards of any width• Double channel permits side-by-side mounting• Material: UL94 V-2 Nylon 6/6• Color: Natural
LCBGLocking Circuit Board Guide
LCBG-TReleasable Locking Circuit Board Guide
Item No. “A” “B”
Accepts PCB Thickness
Bulk Pack Qty.
LCBG-1T-01 .880 (22.4) .865 (22) .062 (1.6) 100LCBG-1.5T-01 1.375 (34.9) 1.360 (34.5) .062 (1.6) 100LCBG-2T-01 1.870 (47.5) 1.855 (47.1) .062 (1.6) 100LCBG-3T-01 2.875 (73) 2.860 (72.6) .062 (1.6) 100
Typical Board Cutout
Mounting Hole: Snap-lock: .175 x .310 (4.45 x 7.87) Rectangular Hole
Panel Thickness: .030 - .070 (0.76 - 1.78)• Double channel permits side-by-side mounting• Board is held in place by locking tab• Board is easily released• Material: UL94 V-2 Nylon 6/6• Color: Natural
Pages 0702 - 0711.indd 706 11/6/2013 4:28:52 PM
(5.38) (4.37)
Pages 0702 - 0711.indd 707
PCB & ELECTRONICS HARDWARE
HORIZONTAL CARD GUIDES
RSSHG Single Sided Horizontal Card Guide
• Innovative mounting method for horizontal mounting • Firm retention for any board width • Material: UL94 V-0 • Nylon 6/6
Mounts into Panel Thickness: .047 - .090 (1.2 - 2.3)
Item No. "A" "B"
Accepts PCB Thickness
Bulk Peck Qty.
RSSHG-201-165 RSSHG-251-165 RSSHG-301-165
2.0 r
7
0.1 2.5 63.5 3.0 6.2
1.0 25.4 1.5 38.1 2.0 50.8
.062 1.6
.062 [Li
.062 1.6
500 500 500
• Color: Black RSSHG-351-165 RSSHG-401-165
3.5 (88.9) 4.0 (101.6)
2.5 .73.5i 3.0 6.2
.062 (1.6)
.062 1.6 500 500
RSSHG-451-165 4.5 (114.3) 3.5 88.9 .062 1.6 500 RSSHG-501-165 5.0 (127) 4.0 ( 01. ) .062 1.6 500 RSSHG-601-165 6.0 (152.4) 5.0 (127) .062 (1.6) 500
BMS-S Board Mounting Strip
Adhesive Bulk Peck
Qty. BMS-S-48
BMS-SA-48 N/A Yes
100 100
.05
Optional Adhesive
Item No.
• Horizontal mount for boards of any length or width • Material: UL94 V-0 Rigid PVC • Color: Black • Adhesive: Optional 1/16 (1.6) thick double sided adhesive • Standard Pack: 100 feet: 25 pieces x 48",
(25 pieces x 1,219.2mm) lengths
BMS-D Board Mounting Strip- Double Sided
New 19 4.8)
--•-• .09 (2.3)
.15 (3.8)
.05
.25 (6.4)
• Horizontal mount for boards of any length or width • Good for parallel mounting • Material: UL94 V-0 Rigid PVC (18.5) .73
Ref. 1.25
• Color: Black • Adhesive: Optional 1/16 (1.6) thick double sided adhesive (31.8)
• Standard Pack: 100 feet: 25 pieces x 48", (25 pieces x 1,219.2mm) lengths Item Bulk Peck
No. Adhesive Qty. BMS-D-48 N/A 100
BMS-DA-48 Yes 100
.08 (2) .085 (2.2)
.28 (7.1) (3.8) _E.15 InJ (RI .165
.50 (12.7) (4.2) Typ. - .31 (7.9)
Recommended Mounting Holes
.163 (4.15)
0.172 .212
.45 (11.4) Ref.
.040 (1)
707Phone: 800 530 9444 Fax: 800 393 0323 www.essentracomponents-toolsupply.comPhone: 800 621 1892 Fax: 773 539 6770 www.essentracomponents.comPhone: 800 551 2052 Fax: 866 642 4115 www.essentracomponents.comPhone: 800 847 0486 Fax: 866 561 6617 www.essentracomponents.com
HORIZONTAL CARD GUIDES
BMS-SBoard Mounting Strip
Item No. Adhesive
Bulk Pack Qty.
BMS-S-48 N/A 100BMS-SA-48 Yes 100
RSSHGSingle Sided Horizontal Card Guide
Item No. “A” “B”
Accepts PCBThickness
Bulk PackQty.
RSSHG-201-165 2.0 (50.8) 1.0 (25.4) .062 (1.6) 500RSSHG-251-165 2.5 (63.5) 1.5 (38.1) .062 (1.6) 500RSSHG-301-165 3.0 (76.2) 2.0 (50.8) .062 (1.6) 500RSSHG-351-165 3.5 (88.9) 2.5 (63.5) .062 (1.6) 500RSSHG-401-165 4.0 (101.6) 3.0 (76.2) .062 (1.6) 500RSSHG-451-165 4.5 (114.3) 3.5 (88.9) .062 (1.6) 500RSSHG-501-165 5.0 (127) 4.0 (101.6) .062 (1.6) 500RSSHG-601-165 6.0 (152.4) 5.0 (127) .062 (1.6) 500
Recommended Mounting Holes
Mounts into Panel Thickness: .047 - .090 (1.2 - 2.3)
• Innovative mounting method for horizontal mounting• Firm retention for any board width• Material: UL94 V-0 • Nylon 6/6 • Color: Black
• Horizontal mount for boards of any length or width• Material: UL94 V-0 Rigid PVC• Color: Black• Adhesive: Optional 1/16 (1.6) thick double sided adhesive• Standard Pack: 100 feet: 25 pieces x 48”,
(25 pieces x 1,219.2mm) lengths
BMS-DBoard Mounting Strip- Double Sided
Item No. Adhesive
Bulk Pack Qty.
BMS-D-48 N/A 100BMS-DA-48 Yes 100
• Horizontal mount for boards of any length or width• Good for parallel mounting• Material: UL94 V-0 Rigid PVC• Color: Black• Adhesive: Optional 1/16 (1.6) thick double sided adhesive• Standard Pack: 100 feet: 25 pieces x 48”, (25 pieces x
1,219.2mm) lengths
Pages 0702 - 0711.indd 707 11/6/2013 4:28:56 PM
RSDC-250 RSDC-300 RSDC-350 RSDC-400
2.5 63.5 3.0 6.2 3.5 88.9 4.0 ( 01. )
RSDC-450 4.5 (114.3)
RSDC-550 0 .
RSDC-600 6.0 152.4 RSDC-650 6.5 164.1 RSDC-700 7.0 177.8 RSDC-750 7.5 190.5 RSDC-800 8.0 (203.2
RSDC Snap-In Card Guide
.50 (12.7) Typ.
Recommended Mounting Holes
.31 (7.9)
.175 (4.4) -;
Buy One or Buy Bulk&SNE
• Tapered on both ends to ease insertion of the PC board
• Material: UL94 V-2 Nylon 6/6 • Color: Natural
STANDARD PCB CARD GUIDES & PULLERS ei PCB & ELECTRONICS HARDWARE
.176 (4.47)
0.180 (4.57)
.225 (5.71)
Mounts into Panel Thickness: .047 - .090 (1.2 - 2.3)
RSDC-50 139.T
1.5 38.1 .062 1.6 2.0 50.8 .062 1.6 2.5 63.5 .062 1.6 3.0 6.2 .062 1.6 3.5 88.9 .062 1.6
4.5 (114.3) .062 1.6 5.0 (127) .062 1.6 I 5.5 139.T .062 1.6
6.0 152.4 .062 1.6 6.5 165.1 .062 1.6 7.0 177.8 .062 (1.6
500 500 500 500 500 500 500 500 500 500 500 500
Recommended Mounting Holes
.120 (3.05) Typ.
.25 (6.4)
25 (6 4)
.078 (2)-1 ,_.17 __Q4.3)
j .125 (3.2)
} .13 (3.2P-
Typ.
RN Narrow Card Guide
MN Ilk
0.125 (3.18) .218 (5.54)
Mounts into Panel Thickness: .047 - .085 (1.2 - 2.2)
• Narrow width allows for higher density or optimum air flow
• Material: UL94 V-2 Nylon 6/6 • Color: Natural
Accepts Bulk Item PCB Peck No. "A" "B" "C" Thickness Qty.
RN-250-2 RN-300-2 RN-350-2 RN-400-2 RN-450-2 RN-500-2 RN-550-2 RN-600-2 RN-650-2 RN-700-3 RN-750-3 RN-800-3 RN-850-3
2.5 3.5 3.0 ((76.2))3.588.9 4.0 (101.6) 4.5 (114.3) 5.0 (127)
5.5 1139.7 6.0 152.4 6.5 164.1 7.0 177.8) 7.5 190.5 8.0 203.2 8.5 215.9
2.0 150.8
1
2.5 63.5 3.0 76.2 3.5 88.9 4.0 (101.6) 4.5 (114.3) 5.0 (127)
5.5 139. 6.0 152.4 6.5 164.1 7.0 177.8 7.5 190.5 8.0 203.2
.075 (1.9)
No Taper This End
„ .50 (12.7) Typ.
RSFS Snap-In Card Guide
.075 (1.9)
.19 (4- .8)
Recommended Mounting Holes .182 (4.62)
0.187 (4.75)
Mounts into Panel Thickness: .047 - .090 (1.2 - 2.3)
.250 (6.35)
• Material: UL94 V-2 Nylon 6/6 • Color: Natural
Bulk Item
Accepts PCB Pack No. "A"
"B" Thickness Qty. RSFS-250 RSFS-300 RSFS-350 RSFS-400 RSFS-450 RSFS-451 RSFS-500 RSFS-550 RSFS-600 RSFS-700 RSFS-800
2.5 r3.1 3.0 6.2 3.5 88.9 4.0 (101.6) 4.5 (114.3) 4.5 (114.3) 5.0 (127)
5.5 11397 6.0 152.4 7.0 177.8 8.0 203.2
1.5 13
7
81
3.0 6
2.0 50.8 2.5 63.5
.2 3.0 6.2 3.5 88.9 4.0 01. 4.5 114.3 5.0 127.0 6.0 152.4 7.0 177.8
.062 [Li
.062 1.6
.062 1.6
.062
.062
.062
.062
.062
.062
.062
.062
500 500 500 500 500 500 500 500 500 500 500
.6
.6
.6
.6
.6
.6
.6
.6
• Tapered on both ends to ease insertion of the PC board
• Material: UL94 V-2 Nylon 6/6 • Color: Natural
Item Accepts PCB Bulk Peck No. "A" Ref. "B" Thickness Qty.
3.0 (76.2) 2.5 63.5 4.0 101.1 3.5 88.9 6.0 152.4 5.5 ( 39. 8.5 215.9 8.0 (203.2
.062 [1.6)
.062 1.6
.062 1.6
.062 1.6
RCG-1 RCG-2 RCG-3 RCG-4
500 500 500 500
- .062 1.1 500 - .062 1.6 500 - .062 1.6 500 - .062 [Li 500 - .062 1.6 500 - .062 1.6 500 - .062 [Li 500 - .062 1.6 500 - .062 1.6 500
3.25 (82.2) .062 [1.61 500 3.50 (88.1 .062 1.6 500 3.75 (94.9 .062 1.6 500 4.0 (101.6 .062 1.6 500
RCG Rack Card Guide
1/4 (6.4) Cchcci
aIuII ._ 18
) (3/.2 Ref.
3/16 (4.8)
_ - ------- - L_ 1/4
.05 (1.3) y (6.4)
Recommended Mounting Holes
0.125 (3.18)
.218 L._ 1_ .120
(5.54) (3.05)
Mounts into Panel Thickness: .062 (1.6)
11/6/2013 4:29:03 PM
More Choice Free Samples Ships Today [email protected] Choice Free Samples Ships Today [email protected] Choice Free Samples Ships Today [email protected] Choice Free Samples Ships Today [email protected]
STANDARD PCB CARD GUIDES & PULLERS
RSDCSnap-In Card Guide
Item No. “A” Ref. “B”
Accepts PCB Thickness
Bulk Pack Qty.
RSDC-250 2.5 (63.5) 1.5 (38.1) .062 (1.6) 500RSDC-300 3.0 (76.2) 2.0 (50.8) .062 (1.6) 500RSDC-350 3.5 (88.9) 2.5 (63.5) .062 (1.6) 500RSDC-400 4.0 (101.6) 3.0 (76.2) .062 (1.6) 500RSDC-450 4.5 (114.3) 3.5 (88.9) .062 (1.6) 500RSDC-500 5.0 (127) 4.0 (101.6) .062 (1.6) 500RSDC-550 5.5 (139.7) 4.5 (114.3) .062 (1.6) 500RSDC-600 6.0 (152.4) 5.0 (127) .062 (1.6) 500RSDC-650 6.5 (164.1) 5.5 (139.7) .062 (1.6) 500RSDC-700 7.0 (177.8) 6.0 (152.4) .062 (1.6) 500RSDC-750 7.5 (190.5) 6.5 (165.1) .062 (1.6) 500RSDC-800 8.0 (203.2) 7.0 (177.8) .062 (1.6) 500
Recommended Mounting Holes
Mounts into Panel Thickness: .047 - .090 (1.2 - 2.3)
• Tapered on both ends to ease insertion of the PC board
• Material: UL94 V-2 Nylon 6/6• Color: Natural
Item No. “A” “B” “C”
Accepts PCB
Thickness
Bulk Pack Qty.
RN-250-2 2.5 (63.5) 2.0 (50.8) - .062 (1.6) 500RN-300-2 3.0 (76.2) 2.5 (63.5) - .062 (1.6) 500RN-350-2 3.5 (88.9) 3.0 (76.2) - .062 (1.6) 500RN-400-2 4.0 (101.6) 3.5 (88.9) - .062 (1.6) 500RN-450-2 4.5 (114.3) 4.0 (101.6) - .062 (1.6) 500RN-500-2 5.0 (127) 4.5 (114.3) - .062 (1.6) 500RN-550-2 5.5 (139.7) 5.0 (127) - .062 (1.6) 500RN-600-2 6.0 (152.4) 5.5 (139.7) - .062 (1.6) 500RN-650-2 6.5 (164.1) 6.0 (152.4) - .062 (1.6) 500RN-700-3 7.0 (177.8) 6.5 (164.1) 3.25 (82.2) .062 (1.6) 500RN-750-3 7.5 (190.5) 7.0 (177.8) 3.50 (88.5) .062 (1.6) 500RN-800-3 8.0 (203.2) 7.5 (190.5) 3.75 (94.9) .062 (1.6) 500RN-850-3 8.5 (215.9) 8.0 (203.2) 4.0 (101.6) .062 (1.6) 500
Recommended Mounting Holes
Mounts into Panel Thickness: .047 - .085 (1.2 - 2.2)
• Narrow width allows for higher density or optimum air flow
• Material: UL94 V-2 Nylon 6/6• Color: Natural
RNNarrow Card Guide
RSFSSnap-In Card Guide
Item No. “A” “B”
Accepts PCB Thickness
Bulk Pack Qty.
RSFS-250 2.5 (63.5) 1.5 (38.1) .062 (1.6) 500RSFS-300 3.0 (76.2) 2.0 (50.8) .062 (1.6) 500RSFS-350 3.5 (88.9) 2.5 (63.5) .062 (1.6) 500RSFS-400 4.0 (101.6) 3.0 (76.2) .062 (1.6) 500RSFS-450 4.5 (114.3) 3.0 (76.2) .062 (1.6) 500RSFS-451 4.5 (114.3) 3.5 (88.9) .062 (1.6) 500RSFS-500 5.0 (127) 4.0 (101.6) .062 (1.6) 500RSFS-550 5.5 (139.7) 4.5 (114.3) .062 (1.6) 500RSFS-600 6.0 (152.4) 5.0 (127.0) .062 (1.6) 500RSFS-700 7.0 (177.8) 6.0 (152.4) .062 (1.6) 500RSFS-800 8.0 (203.2) 7.0 (177.8) .062 (1.6) 500
Recommended Mounting Holes
Mounts into Panel Thickness: .047 - .090 (1.2 - 2.3)
RCGRack Card Guide
Recommended Mounting Holes
Mounts into Panel Thickness: .062 (1.6)
ItemNo. “A” Ref. “B”
Accepts PCB Thickness
Bulk Pack Qty.
RCG-1 3.0 (76.2) 2.5 (63.5) .062 (1.6) 500RCG-2 4.0 (101.6) 3.5 (88.9) .062 (1.6) 500RCG-3 6.0 (152.4) 5.5 (139.7) .062 (1.6) 500RCG-4 8.5 (215.9) 8.0 (203.2) .062 (1.6) 500
• Tapered on both ends to ease insertion of the PC board
• Material: UL94 V-2 Nylon 6/6• Color: Natural
• Material: UL94 V-2 Nylon 6/6• Color: Natural
Pages 0702 - 0711.indd 708 11/6/2013 4:29:03 PM
.075 (1.91)
L .125 (3.18)
- .05 (1.27) -.175 (4.45)
Tension Grips
.24 (6.1)
RSSD Snap-In Card Guide
STANDARD PCB CARD
PCB & ELECTRONICS HARDWARE 111M.
GUIDES & PULLERS
.31 (7.9)
.125 (3.2)1 No Taper This End
.075 (1.9) New .075 .17 (4.3)
11111111111."111 (1.9) .50 (12.7) 13° Typ.
Recommended Mounting Holes • No tools required for assembly • Material: UL94 V-2 Nylon 6/6 • Color: Natural
13" .176 (4.47)
Item No. "A" Ref.
Accepts PCB Bulk Pack "B" Thickness Qty.
RSSD-250 2.5(63.5) 1.6 500 RSSD-300 3.0 76.2 2.0 50.8 .062 1.6 500 RSSD-350 3.5 88.9 2.5 63.5 .062 1.6 500 RSSD-400 4.0 101.
1.5 381 .062
3.0 6.2 .062 1.6 500 RSSD-450 4.5 114.3 3.5 88.9 .062 1.6 500
.180 .225 RSSD-450-300 4.5 114.3 3.0 6.2 .062 1.6 500 (4.57) (5.71) RSSD-500
RSSD-550 5.0
5.5 (127) 139.7
4.0 4.5
01. 114.3
.062
.062 1.6 1.6
500 500
Mounts into Panel Thickness: .047-.090 (1.2-2.3) RSSD-600 RSSD-650
6.0 6.5
152.4 164.1
5.0 5.5
127.0 139.7)
.062
.062 1.6 1.6
500 500
RSSD-700 7.0 177.8 6.0 152.4 .062 1.6 500 RSSD-750 7.5 190.5 6.5 165.1 .062 1.6 500 RSSD-800 8.0 03.2 7.0 (177.8 .06211.6 500
RCGH Rack Card Guide echcci
Recommended Mounting Holes • Side grips hold board in place • Hollow pin design eases insertion
.176 (4.47) • Material: UL94 V-2 Nylon 6/6 • Color: Natural
Bulk Item Number Accepts PCB Pack
0.180 (4.57) .225 (5.71) No. "A" Ref. "B" of Gri .3 Thickness . RCGH-25 2.5 2.0 2 .062 1.6 500
Mounts into Panel Thickness: .062 (1.6)
.73.5i r0.8 RCGH-30 3.0 6.2 2.5 63.5 3 .062 RCGH-35 3.5 88.9 3.0 76.2 3 .062
1.6 1.6
500 500
RCGH-40 4.0 ( 01. ) 3.5 88.9 4 .062 1.6 500 RCGH-45 4.5 (114.3) 4.0 (101. ) 4 .062 1.6 500 RCGH-50 5.0 (12 4.5 (114.3) 4 .062 1.6 500 RCGH-55 5.5 139. 5.0 (12 5 .062 1.6 500 RCGH-60 6.0 (152.4 5.5 139 5 .062 1.6 500
RDC Deep Channel Card Guide
.25 (6.4)
1-- °ID" .25 (6.4) Ref. 1_77
.25 (6.4
• Slot depth of .200" allows for maximum board retention
.19 .20
(5.1)
(4.8) .50
(127) "C" • Good for high vibration and shock applications Typ. • Material: UL94 V-0 Nylon 6/6
Mounting Holes Recommended • Color: Black
0.187 (4.75) .182 (4.62) Bulk
Accepts PCB Pack "D" Thickness Qty.
RDC-250 RDC-450
2.5 4.5
(63.5) 114.3
1.5 (38.1 3.5 (88.9 -
.080 2 1/16 1.6
.080 2 1/16 1.6 500 500
"c" RDC-600 RDC-800
6.0 8.0
152.4 203.2
5.0 (12 7.0 (177.) 3.5
- (88.9)
.080 2 1/16 1.6
.080 2 1/16 1.6 500 500 .250 (6.35)
RDC-450-102 4.5 114.3 - .102 . 3/32 2.4 500 RDC-600-102 6.0 152.4
3.5 (88.i 5.0 (12 .102 2.6 3/32 500
Mounts into Panel Thickness: .047 - .090 (1.2 - 2.3) RDC-800-102 RDC-450-130
8.0 4.5
203.2 114.3
7.0 (177. ) 3.588.9
3.5 (88.9) -
.102
.132 2.6 3.4
3/3222..44
1/8 500 500
RDC-600-130 6.0 152.4 5.0 12 .132 3.4 1/8 3.2 500 RDC-800-130 8.01203.2 7.0 ( 77.) 3.5 (88.9) .132 13.4 1/8 3.2 500
Pages 0702 - 0711.indd 709
709Phone: 800 530 9444 Fax: 800 393 0323 www.essentracomponents-toolsupply.comPhone: 800 621 1892 Fax: 773 539 6770 www.essentracomponents.comPhone: 800 551 2052 Fax: 866 642 4115 www.essentracomponents.comPhone: 800 847 0486 Fax: 866 561 6617 www.essentracomponents.com
STANDARD PCB CARD GUIDES & PULLERS
Item No. “A” Ref. “B”
Accepts PCB Thickness
Bulk Pack Qty.
RSDC-250 2.5 (63.5) 1.5 (38.1) .062 (1.6) 500RSDC-300 3.0 (76.2) 2.0 (50.8) .062 (1.6) 500RSDC-350 3.5 (88.9) 2.5 (63.5) .062 (1.6) 500RSDC-400 4.0 (101.6) 3.0 (76.2) .062 (1.6) 500RSDC-450 4.5 (114.3) 3.5 (88.9) .062 (1.6) 500RSDC-500 5.0 (127) 4.0 (101.6) .062 (1.6) 500RSDC-550 5.5 (139.7) 4.5 (114.3) .062 (1.6) 500RSDC-600 6.0 (152.4) 5.0 (127) .062 (1.6) 500RSDC-650 6.5 (164.1) 5.5 (139.7) .062 (1.6) 500RSDC-700 7.0 (177.8) 6.0 (152.4) .062 (1.6) 500RSDC-750 7.5 (190.5) 6.5 (165.1) .062 (1.6) 500RSDC-800 8.0 (203.2) 7.0 (177.8) .062 (1.6) 500
Item No. “A” “B” “C”
Accepts PCB
Thickness
Bulk Pack Qty.
RN-250-2 2.5 (63.5) 2.0 (50.8) - .062 (1.6) 500RN-300-2 3.0 (76.2) 2.5 (63.5) - .062 (1.6) 500RN-350-2 3.5 (88.9) 3.0 (76.2) - .062 (1.6) 500RN-400-2 4.0 (101.6) 3.5 (88.9) - .062 (1.6) 500RN-450-2 4.5 (114.3) 4.0 (101.6) - .062 (1.6) 500RN-500-2 5.0 (127) 4.5 (114.3) - .062 (1.6) 500RN-550-2 5.5 (139.7) 5.0 (127) - .062 (1.6) 500RN-600-2 6.0 (152.4) 5.5 (139.7) - .062 (1.6) 500RN-650-2 6.5 (164.1) 6.0 (152.4) - .062 (1.6) 500RN-700-3 7.0 (177.8) 6.5 (164.1) 3.25 (82.2) .062 (1.6) 500RN-750-3 7.5 (190.5) 7.0 (177.8) 3.50 (88.5) .062 (1.6) 500RN-800-3 8.0 (203.2) 7.5 (190.5) 3.75 (94.9) .062 (1.6) 500RN-850-3 8.5 (215.9) 8.0 (203.2) 4.0 (101.6) .062 (1.6) 500
Item No. “A” “B”
Accepts PCB Thickness
Bulk Pack Qty.
RSFS-250 2.5 (63.5) 1.5 (38.1) .062 (1.6) 500RSFS-300 3.0 (76.2) 2.0 (50.8) .062 (1.6) 500RSFS-350 3.5 (88.9) 2.5 (63.5) .062 (1.6) 500RSFS-400 4.0 (101.6) 3.0 (76.2) .062 (1.6) 500RSFS-450 4.5 (114.3) 3.0 (76.2) .062 (1.6) 500RSFS-451 4.5 (114.3) 3.5 (88.9) .062 (1.6) 500RSFS-500 5.0 (127) 4.0 (101.6) .062 (1.6) 500RSFS-550 5.5 (139.7) 4.5 (114.3) .062 (1.6) 500RSFS-600 6.0 (152.4) 5.0 (127.0) .062 (1.6) 500RSFS-700 7.0 (177.8) 6.0 (152.4) .062 (1.6) 500RSFS-800 8.0 (203.2) 7.0 (177.8) .062 (1.6) 500
RSSDSnap-In Card Guide
Item No. “A” Ref. “B”
Accepts PCB Thickness
Bulk Pack Qty.
RSSD-250 2.5 (63.5) 1.5 (38.1) .062 (1.6) 500RSSD-300 3.0 (76.2) 2.0 (50.8) .062 (1.6) 500RSSD-350 3.5 (88.9) 2.5 (63.5) .062 (1.6) 500RSSD-400 4.0 (101.6) 3.0 (76.2) .062 (1.6) 500RSSD-450 4.5 (114.3) 3.5 (88.9) .062 (1.6) 500
RSSD-450-300 4.5 (114.3) 3.0 (76.2) .062 (1.6) 500RSSD-500 5.0 (127) 4.0 (101.6) .062 (1.6) 500RSSD-550 5.5 (139.7) 4.5 (114.3) .062 (1.6) 500RSSD-600 6.0 (152.4) 5.0 (127.0) .062 (1.6) 500RSSD-650 6.5 (164.1) 5.5 (139.7) .062 (1.6) 500RSSD-700 7.0 (177.8) 6.0 (152.4) .062 (1.6) 500RSSD-750 7.5 (190.5) 6.5 (165.1) .062 (1.6) 500RSSD-800 8.0 (203.2) 7.0 (177.8) .062 (1.6) 500
RCGHRack Card Guide
Item No. “A” Ref. “B”
Number of Grips
Accepts PCB Thickness
Bulk Pack Qty.
RCGH-25 2.5 (63.5) 2.0 (50.8) 2 .062 (1.6) 500RCGH-30 3.0 (76.2) 2.5 (63.5) 3 .062 (1.6) 500RCGH-35 3.5 (88.9) 3.0 (76.2) 3 .062 (1.6) 500RCGH-40 4.0 (101.6) 3.5 (88.9) 4 .062 (1.6) 500RCGH-45 4.5 (114.3) 4.0 (101.6) 4 .062 (1.6) 500RCGH-50 5.0 (127) 4.5 (114.3) 4 .062 (1.6) 500RCGH-55 5.5 (139.7) 5.0 (127) 5 .062 (1.6) 500RCGH-60 6.0 (152.4) 5.5 (139.7) 5 .062 (1.6) 500
Recommended Mounting Holes
Mounts into Panel Thickness: .062 (1.6)
Recommended Mounting Holes
Mounts into Panel Thickness: .047-.090 (1.2-2.3)
• Side grips hold board in place• Hollow pin design eases insertion• Material: UL94 V-2 Nylon 6/6• Color: Natural
• No tools required for assembly• Material: UL94 V-2 Nylon 6/6• Color: Natural
RDCDeep Channel Card Guide
Item No. “A” Ref. “B” “C” “D”
Accepts PCB Thickness
Bulk Pack Qty.
RDC-250 2.5 (63.5) 1.5 (38.1) - .080 (2) 1/16 (1.6) 500RDC-450 4.5 (114.3) 3.5 (88.9) - .080 (2) 1/16 (1.6) 500RDC-600 6.0 (152.4) 5.0 (127) - .080 (2) 1/16 (1.6) 500RDC-800 8.0 (203.2) 7.0 (177.8) 3.5 (88.9) .080 (2) 1/16 (1.6) 500
RDC-450-102 4.5 (114.3) 3.5 (88.9) - .102 (2.6) 3/32 (2.4) 500RDC-600-102 6.0 (152.4) 5.0 (127) - .102 (2.6) 3/32 (2.4) 500RDC-800-102 8.0 (203.2) 7.0 (177.8) 3.5 (88.9) .102 (2.6) 3/32 (2.4) 500RDC-450-130 4.5 (114.3) 3.5 (88.9) - .132 (3.4) 1/8 (3.2) 500RDC-600-130 6.0 (152.4) 5.0 (127) - .132 (3.4) 1/8 (3.2) 500RDC-800-130 8.0 (203.2) 7.0 (177.8) 3.5 (88.9) .132 (3.4) 1/8 (3.2) 500
• Slot depth of .200” allows for maximum board retention• Good for high vibration and shock applications• Material: UL94 V-0 Nylon 6/6• Color: BlackRecommended Mounting Holes
Mounts into Panel Thickness: .047 - .090 (1.2 - 2.3)
Pages 0702 - 0711.indd 709 11/6/2013 4:29:06 PM
TRCG Tension Rack Card Guide
• Tension wings provide firm retention of the PCB • Material: UL94 V-0 Polycarbonate • Color: Black
MPCG Multi Panel Card Guide
.09 .14 (2.2) (3.6)
i=1 .14 I
(3.5)
Recommended Mounting Holes
.182 (4.62)
.250 (6.35)
Mounts into Panel Thickness: .020 - .079 (0.5 - 2)
0.187 (4.75)
.30 (7.5)
.11 (2.8) • Tension wings provide firm retention of the PCB
• Funnel entry for easy board insertion • Material: UL94 V-0 Nylon 6/6 • Color: Natural
Item No. "A" Ref. "B"
MPCG-250 2.5 1.5 38.1 MPCG-300 3.0
.73.1 6.2 2.0 50.8
MPCG-400 4.0 ( 01. ) 3.0 6.2 MPCG-550 5.5 (139.7) 4.5 ( 14.)
• Molded from conductive material • Provides surface resistivity of 103 0./sq • Helps to protect static sensitive components from
electro-static discharge • Material: Conductive Compound, Nylon 6 • Color: Black
Item Accepts PCB Bulk Peck No. "A" Ref. "B" Thickness Qty.
MPCGCN-250 1.5 .032 - .079 - 500 MPCGCN-300
2.5 63.1 3.0 76.2
r8.1i 2.0 50.8 .032 - .079 0.8 - 2 500
MPCGCN-400 4.0 ( 01. ) 3.0 76.2
10.8
.032 - .079 0.8 - 2 500 MPCGCN-550 5.5 (139.7) 4.5 (114. ) .032 - .079 0.8 - 2 500
11/6/2013 4:29:11 PM
.032 - .079 0.8 - 2 500
.032 - .079 0.8 - 2 500
.032 - .079 0.8 - 2 500
.032 - .079 0.8 - 2 500
.125,128
Bulk Number of Accepts PCB Peck
Tension Grips Thickness Qty.
ei PCB & ELECTRONICS HARDWARE
TCG Tension Card Guide
Recommended Mounting Holes
0.125-.131 J .218 (5.54) (3.17-3.33)
Mounts into Panel Thickness: .062 (1.6)
TCG1-2.500-23 2.500 2.200 55.9) 1 .062 500 TCG1-3.300-23 3.300 83.8 3.000 76.2 2 .062 1.6 500 TCG1-3.925-23 3.925 99. 3.625 92.1 2 .062
11.61
1.6 500 TCG1-6.675-23 6.675 ( 69.) 6.375 ( 61.) 4 .062 1.6 500
MULTI PANEL TENSION & ESD CARD GUIDES
.286 (7.3)
.180 (4.6)
Tension Grips
7
41111111111111111111111111.
Buy One or Buy Bulk&SNE
echcci
(3.17-3.25)
.09 .150 • Tension grips apply spring pressure to hold boards (3.8) • Slotted surface improves ventilation
• Material: UL94 V-0 Polycarbonate • Color: Black
dim
,11111." CC
.09 (2.4)
.18 (4.6) Ref.
Recommended Mounting Holes
.128,131 (3.25-3.33)
.215,218 (5.46-5.54)
0.128,131 (3.25-3.33)
Mounts into Panel Thickness: .06 - .07 (1.5 - 1.8)
Item Accepts PCB Bulk Peck No. "A" "B" Thickness Qty.
TRCG-2.500 2.50 2.2 (55.9) .050 - .087 11.3 - 2.21 TRCG-3.300 3.30 83.8 3 (76.2) .050 - .087 1.3 - 2.2 TRCG-3.925 a93 99. 3-5/8 (92.1) .050 - .087 1.3 - 2.2 TRCG-6.675 6.68 ( 69.) 6-3/8 (161.9) .050 - .087 1.3 - 2.2
500 500 500 500
.39 (9.9)
'Oa
More Choice Free Samples Ships Today [email protected] Choice Free Samples Ships Today [email protected] Choice Free Samples Ships Today [email protected] Choice Free Samples Ships Today [email protected]
MULTI PANEL TENSION & ESD CARD GUIDES
TCGTension Card Guide
Item No. “A” “B”
Number of Tension Grips
Accepts PCB Thickness
Bulk Pack Qty.
TCG1-2.500-23 2.500 (63.5) 2.200 (55.9) 1 .062 (1.6) 500TCG1-3.300-23 3.300 (83.8) 3.000 (76.2) 2 .062 (1.6) 500TCG1-3.925-23 3.925 (99.7) 3.625 (92.1) 2 .062 (1.6) 500TCG1-6.675-23 6.675 (169.5) 6.375 (161.9) 4 .062 (1.6) 500
• Tension grips apply spring pressure to hold boards• Slotted surface improves ventilation• Material: UL94 V-0 Polycarbonate• Color: Black
Recommended Mounting Holes
Mounts into Panel Thickness: .062 (1.6)
TRCGTension Rack Card Guide
Item No. “A” “B”
Accepts PCB Thickness
Bulk PackQty.
TRCG-2.500 2.50 (63.5) 2.2 (55.9) .050 - .087 (1.3 - 2.2) 500TRCG-3.300 3.30 (83.8) 3 (76.2) .050 - .087 (1.3 - 2.2) 500TRCG-3.925 3.93 (99.7) 3-5/8 (92.1) .050 - .087 (1.3 - 2.2) 500TRCG-6.675 6.68 (169.6) 6-3/8 (161.9) .050 - .087 (1.3 - 2.2) 500
Recommended Mounting Holes
Mounts into Panel Thickness: .06 - .07 (1.5 - 1.8)• Tension wings provide firm retention of the PCB• Material: UL94 V-0 Polycarbonate• Color: Black
MPCGMulti Panel Card Guide
Item No. “A” Ref. “B”
Accepts PCB Thickness
Bulk Pack Qty.
MPCG-250 2.5 (63.5) 1.5 (38.1) .032 - .079 (0.8 - 2) 500MPCG-300 3.0 (76.2) 2.0 (50.8) .032 - .079 (0.8 - 2) 500MPCG-400 4.0 (101.6) 3.0 (76.2) .032 - .079 (0.8 - 2) 500MPCG-550 5.5 (139.7) 4.5 (114.4) .032 - .079 (0.8 - 2) 500
Recommended Mounting Holes
Mounts into Panel Thickness: .020 - .079 (0.5 - 2)
• Tension wings provide firm retention of the PCB• Funnel entry for easy board insertion• Material: UL94 V-0 Nylon 6/6• Color: Natural
• Molded from conductive material• Provides surface resistivity of 10³ Ω/sq• Helps to protect static sensitive components from
electro-static discharge• Material: Conductive Compound, Nylon 6 • Color: Black
Item No. “A” Ref. “B”
Accepts PCB Thickness
Bulk PackQty.
MPCGCN-250 2.5 (63.5) 1.5 (38.1) .032 - .079 (0.8 - 2) 500MPCGCN-300 3.0 (76.2) 2.0 (50.8) .032 - .079 (0.8 - 2) 500MPCGCN-400 4.0 (101.6) 3.0 (76.2) .032 - .079 (0.8 - 2) 500MPCGCN-550 5.5 (139.7) 4.5 (114.4) .032 - .079 (0.8 - 2) 500
Pages 0702 - 0711.indd 710 11/6/2013 4:29:11 PM
.062 (1.6)
.062 (1.6) UL94 V-2 Nylon 6/6
UL94 V-0 PVC ACGE-01 End Pieces
ACGC-4800 Channel 100 per bag
100 feet: 25 pieces x 48" (25 pieces x 1,219mm)
Item No.
Bul
1,000 PCB-MB-01
PCB & ELECTRONICS HARDWARE
PCB CARD GUIDES
.15 (3.7)
Adjustable Card Guide Ends: ACGE-01
ACGC/ACGE Adjustable Card Guide
ACGC/ACGE
.22 (5.6)
Adjustable Card Guide Channel: ACGC-4800
.17(4.3) .25 (6.4)
ACGE .34 (8.7)
ACGC
0.125 .125 - .128 .22 (3.2) Z (3.2 - 3.3) (5.5)
48 (1219)
48.34 (1227.8)
Mounts into Panel Thickness: .062 (1.6)
Recommended Mounting Holes
• Adjustable design; insert ACGE-01 end pieces into ACGC channel and snap into chassis holes • Channel is provided in 4-foot lengths that can be cut to desired length • Color: Natural
PCG Printed Circuit Guide
.24 (6.1) .18 Ref. (4.6)
. .06 (1.5) 040 (1) Typ. r Typ.
Frichcd
• Provided in 4-foot lengths that can be cut to desired length • Optional Adhesive: 1/16 (1.6) thick double sided adhesive • Color: Grey • Standard Pack: 100 feet: 25 pieces x 48", (25 pieces x
1,219.2mm) lengths
3/4 (19.1)
PCG-4
PCB-MB Printed Circuit Board Mounting Block
1,1 • Mounts PCBs to chassis or to other PC Boards • Various mounting modes available to fit specific board needs • Material: UL94 V-2 Nylon 6/6 • Color: Natural
PCG-3-48 UL94 HB ABS N/A .062 Fl 100 PCG-3A-48 UL94 HB ABS Yes .062 1.6 100 PCG-4-48 UL94 V-0 PVC N/A .062 1.6 100
PCG-4A-48 UL94 V-0 PVC Yes .062 1.6 100
.03 (0.7) x
.02 (0.5) x 45°
r .06 (1.6)
.35 (9)
0.10 (2.6)
.35 (9) .20 (5) x 45°
.35 .51 (13) (9)
Mounting Holes: For Metal #4 (M3) Self-Tapping Screw
Pages 0702 - 0711.indd 711 11/ . :
.160 (4.1)
.59 (15)
PCG-3
711Phone: 800 530 9444 Fax: 800 393 0323 www.essentracomponents-toolsupply.comPhone: 800 621 1892 Fax: 773 539 6770 www.essentracomponents.comPhone: 800 551 2052 Fax: 866 642 4115 www.essentracomponents.comPhone: 800 847 0486 Fax: 866 561 6617 www.essentracomponents.com
PCB CARD GUIDES
Item No. “A” “B”
Number of Tension Grips
Accepts PCB Thickness
Bulk Pack Qty.
TCG1-2.500-23 2.500 (63.5) 2.200 (55.9) 1 .062 (1.6) 500TCG1-3.300-23 3.300 (83.8) 3.000 (76.2) 2 .062 (1.6) 500TCG1-3.925-23 3.925 (99.7) 3.625 (92.1) 2 .062 (1.6) 500TCG1-6.675-23 6.675 (169.5) 6.375 (161.9) 4 .062 (1.6) 500
Item No. “A” “B”
Accepts PCB Thickness
Bulk PackQty.
TRCG-2.500 2.50 (63.5) 2.2 (55.9) .050 - .087 (1.3 - 2.2) 500TRCG-3.300 3.30 (83.8) 3 (76.2) .050 - .087 (1.3 - 2.2) 500TRCG-3.925 3.93 (99.7) 3-5/8 (92.1) .050 - .087 (1.3 - 2.2) 500TRCG-6.675 6.68 (169.6) 6-3/8 (161.9) .050 - .087 (1.3 - 2.2) 500
• Tension wings provide firm retention of the PCB• Funnel entry for easy board insertion• Material: UL94 V-0 Nylon 6/6• Color: Natural
Item No. “A” Ref. “B”
Accepts PCB Thickness
Bulk PackQty.
MPCGCN-250 2.5 (63.5) 1.5 (38.1) .032 - .079 (0.8 - 2) 500MPCGCN-300 3.0 (76.2) 2.0 (50.8) .032 - .079 (0.8 - 2) 500MPCGCN-400 4.0 (101.6) 3.0 (76.2) .032 - .079 (0.8 - 2) 500MPCGCN-550 5.5 (139.7) 4.5 (114.4) .032 - .079 (0.8 - 2) 500
ACGC/ACGEAdjustable Card Guide
ACGC/ACGE
ACGE
ItemNo. Description Material Accepts PCB Thickness
Bulk PackQty.
ACGE-01 End Pieces UL94 V-2 Nylon 6/6 .062 (1.6) 100 per bagACGC-4800 Channel UL94 V-0 PVC .062 (1.6) 100 feet: 25 pieces x 48” (25 pieces x 1,219mm)
ACGC
Recommended Mounting Holes
Mounts into Panel Thickness: .062 (1.6)
• Adjustable design; insert ACGE-01 end pieces into ACGC channel and snap into chassis holes• Channel is provided in 4-foot lengths that can be cut to desired length• Color: Natural
Adjustable Card GuideEnds: ACGE-01
Adjustable Card GuideChannel: ACGC-4800
PCGPrinted Circuit Guide
Item No. Material Adhesive
Accepts PCB Thickness
Bulk PackQty.
PCG-3-48 UL94 HB ABS N/A .062 (1.6) 100PCG-3A-48 UL94 HB ABS Yes .062 (1.6) 100PCG-4-48 UL94 V-0 PVC N/A .062 (1.6) 100
PCG-4A-48 UL94 V-0 PVC Yes .062 (1.6) 100PCG-3 PCG-4
• Provided in 4-foot lengths that can be cut to desired length• Optional Adhesive: 1/16 (1.6) thick double sided adhesive• Color: Grey• Standard Pack: 100 feet: 25 pieces x 48”, (25 pieces x
1,219.2mm) lengths
Mounting Holes: For Metal #4 (M3) Self-Tapping Screw
Item No.
Bulk Pack Qty.
PCB-MB-01 1,000
• Mounts PCBs to chassis or to other PC Boards• Various mounting modes available to fit specific board needs• Material: UL94 V-2 Nylon 6/6• Color: Natural
PCB-MBPrinted Circuit Board Mounting Block
Pages 0702 - 0711.indd 711 11/6/2013 4:29:20 PM
Buy One or Buy Bulk&SNE
;751 .25 (6.4)
RCP Card Ejector
0.093 (2.4)
.3(
? r._
.060 .187 (4.7) 1 (9.9) (1.5)
.125Illgt
R .093 (2.4) R.125
.25 (6.4)
-- (3.2)
Fig. 6 Fig. 7
Fig. Roll Pin Supplied -:luJ 1 RRP-250 500 1 RRP-250 500 2 RRP-250 500 3 RRP-250 500 4 RRP-312 500
RRP-312 RRP-250 RRP-250 RRP-250
500 500 500 500
eichal 1 1/8 (28.6)
5/16 (7.9)
I.D. Slot for Label Accepts 3/16 X 1 (4.8 X 25.4)
Self-Adhesive Label .40
(1.6)7, .062
/S\
I
- 1.indd 712 11/6/2013 4:30:29 PM
1.126 (28.6) .44 (11.2)
fo
o•so ir.25 (6.4)
0.093 (2A)
Fig. 1
1.125 (28.6) .25 (6.4i_
R .125 (3.2)
Pte.(11.2)
te
m
(12.7)
.25 (6.4)
-1 .125j (3.2)
0.093 R1(3..6
0) (2.4)
Fig. 2
k_.25 R 140
(6.4) (3.6)
1 50 (38.1) .125
.312 r_ (3.2) (7.9)
R .093
(24) R .125 (3.2)
0.093 (2.4)
1.10 (27.9)
45° x .250 (6.4) Chamfer
.250 (6.4)
.250 (6.4)
Typical Application
(.•94)
.25 (6.4)-1-1
.25 (6.4)
.125 (3.2)
L 0.109 (2.8)
Item Bulk Peck No. PCB Thickness F • . Roll Pin Su • • lied
.062 F1.61 5
.062 1.6 6
.062 1.6 7
.093 2.4 7
RCP-56 RCP-66 RCP-86 RCP-89
(10.2)
I-
0.093 (2.4)
• Fit onto .109" (2.8mm) diameter hole in a board 1/16" (1.6mm) thick
• Leverage against guide rack or chassis to eject board • Material: UL94 V-2 • Nylon 6/6 • Color: See Table
(6.6) .26
(2.4)
.250 (6.4) X 45° Corner Must Be
Angle Cut
1-3/32 (27.8) --I
New
.17 (4.3) (8.1)
5/16 (7S)
45/64
(17.9) .10
.062 _ (2.5) (1.6)
RRP PCB Round Roll Pin
Roll Pins for use with the following card electors, inserters/extractors:
RRP-250 RRP-312 RRP-375 RCP-06 RCP-46 R1209-062 RCP-09 RCP-56 R1209-093 RCP-26 R11073-062 RCP-36 R11073-093 RCP-66 R11073-125 RCP-86 R1107310-062 RCP-89 R1107310-093
R1001-062 R1107310-125 R1002-093 R1007-062
R110710-062
• Round roll pin is provided with certain inserters for installation
• Material: 302 Stainless Steel
Rem Bulk Peck No. "D" "12' Qty.
.093 2.4 .250 (6.4)
.093 2.4 .312 (8)
.125 3.2 .375 (9.5)
RRP-250 RRP-312 RRP-375
100 100 100
.25 (6.4)
PCB & ELECTRONICS HARDWARE
CARD EJECTORS
R .125 (3.2)
.25 (6.4)
J__
Fig. 3
• Strong and rigid with optimum leverage to assist in extraction • RRP roll pin is supplied for mounting (see bottom of page)
CBE Circuit Board Ejector
IBM 5/16 (7.9)
.062 (1.6)
7 35/64 (13.9)
.▪ 10 (2.5)
1/4 (6.4)
al=ff1M, CBE-1 Natural 1 1,000 CBE-8 Natural 2 1,000
CBE-11 Black 2 1,000
0.109 (2.8)
Recommended Mounting Hole
Bulk Peck Qty.
.25 (6.4)
PCB Thickness
RCP-06 .062 1.6 RCP-09 .093 2.4 RCP-26 .062 1.6 RCP-36 .062 1.6 RCP-46 .062 1.6
More Choice Free Samples Ships Today [email protected] Choice Free Samples Ships Today [email protected] Choice Free Samples Ships Today [email protected] Choice Free Samples Ships Today [email protected]
RCPCard Ejector
Item No. PCB Thickness Fig. Roll Pin Supplied
Bulk PackQty.
RCP-06 .062 (1.6) 1 RRP-250 500RCP-09 .093 (2.4) 1 RRP-250 500RCP-26 .062 (1.6) 2 RRP-250 500RCP-36 .062 (1.6) 3 RRP-250 500RCP-46 .062 (1.6) 4 RRP-312 500
Fig. 1 Fig. 2 Fig. 3
Fig. 4 Fig. 5
Fig. 6 Fig. 7Typical Application
• Strong and rigid with optimum leverage to assist in extraction• RRP roll pin is supplied for mounting (see bottom of page)
CBECircuit Board Ejector
Item No. Color Fig.
Bulk Pack Qty.
CBE-1 Natural 1 1,000CBE-8 Natural 2 1,000CBE-11 Black 2 1,000
• Fit onto .109” (2.8mm) diameter hole in a board 1/16” (1.6mm) thick
• Leverage against guide rack or chassis to eject board• Material: UL94 V-2• Nylon 6/6• Color: See Table
Recommended Mounting Hole
Item No. “D” “L”
Bulk PackQty.
RRP-250 .093 (2.4) .250 (6.4) 100RRP-312 .093 (2.4) .312 (8) 100RRP-375 .125 (3.2) .375 (9.5) 100
• Round roll pin is provided with certain inserters for installation
• Material: 302 Stainless Steel
RRPPCB Round Roll Pin
Roll Pins for use with the following card ejectors, inserters/extractors:
RRP-250 RRP-312 RRP-375RCP-06 RCP-46 R1209-062RCP-09 RCP-56 R1209-093RCP-26 R11073-062RCP-36 R11073-093RCP-66 R11073-125RCP-86 R1107310-062RCP-89 R1107310-093
R1001-062 R1107310-125R1002-093R1007-062
R110710-062
Item No. PCB Thickness Fig. Roll Pin Supplied
Bulk PackQty.
RCP-56 .062 (1.6) 5 RRP-312 500RCP-66 .062 (1.6) 6 RRP-250 500RCP-86 .062 (1.6) 7 RRP-250 500RCP-89 .093 (2.4) 7 RRP-250 500
R1001/R1002/R1209Inserter/Extractor
CARD EJECTORS
Pages 0712 - 0721.indd 712 11/6/2013 4:30:29 PM
RRP-250 RRP-250 RRP-375 RRP-375
100 100 100 100
1.50 (38.1)
87 (22.1)
0.125 (3.2)
Recommended Mounting Holes
.30 (7.6)
500 .062 (1.6) CCP-1-01
L. iii : mar Pages 0712 - 0721.indd 713
11 PCB & ELECTRONICS HARDWARE
.24 (6.1)
.29 (7.4
.35 8.9
.35 8.9
.29 7.4
.35 (8.9
1.9 1.9 2.5 1.9 2.5
2.0 2.0 2.0 1.5 1.5
50.8 50.8 50.8 38.1 38.1
R1107-062 .075 R11073-062 .075 R11073-093 .100 R110710-062 .075
R1107310-093 .100
.062 1.6 1 RRP-250 100
.062 1.6 1 RRP-312 100
.093 2.4 1 RRP-312 100
.062 1.6 2 RRP-250 100
.093 2.4, 2 RRP-312 100
R1107 Inserter/Extractor
.285 (7.24)
.093 (2.36) Thick Max.
Typical Application
.047 (1.19) 45° x .25 (6.4) Chamfer
Fig. 1 Fig. 2
.591 J I7 .185
(15.01) (4.7)
.435 (11.05)
.26 (6.6)
.156 .490 (3.96)
(12.45) .093 (2.36) Thru
°L1"
.654 (16.61)
"L1- .26
(6.6)
.156 (3.96)
.093 (2.36) .490 Thru
(12.45)
.435 (11.05)
.185 (4.7)
°s°
0.109 (2.77)
250 (6.35) • Material: UL94 V-0 Glass Filled Nylon 6/6
• Color: Natural
Bulk Item PCB Roll Pin Pack No. "S" "W" "1:1" Thickness Fig. Supplied Qty.
R1001/R1002/R1209 Inserter/Extractor
1.937 (49.2) .38
(9.7) .370
.290 (9.4)
.192 (4.9)
.650 (16.5)
.150 (3.8)
Fig. 2
.25 (6.4)
.51 (13) .32 (8.1) .25 (6.4)
45° x .25 (6.4) Chamfer
26 (6.6) .25 .25 (6.4)
(6.4) .02 (0.5)
.31 (7.9) .22 MM.
.047 (1.2) 45* x .25 (6.4) Chamfer 0.109
(2.77)
Typical Application Typical Application
.093 (2.36) .047 Thick Max.
(1.19)
.646 (16.41)
"5"
CARD INSERTER, EJECTOR & PULLER
• Strong and rigid with optimum leverage to assist in both insertion and extraction
• RRP roll pin is supplied for mounting (see page 712) • Material: UL94 V-2 Nylon 6/6 • Color: Natural
II
I III .28(7.1)
• Curved tab provides fingertip grip for board insertion and extraction
• Material: UL94 V-2 Nylon 6/6 • Color: Natural
Item Bulk Peck No. Accepts PCB Thickness Qty.
1.25 (31.8)
Item Bulk Peck No. "5" PCB Thickness Fig. Roll Pin Qty.
R1001-062 R1002-093 R1209-062 R1209-093
.075 [1.9)
.100 2.5
.075 1.9
.100 2.5
.062 [1.6) 1
.093 2.4 1
.062 1.6 2
.093 2.4 2
CCP-1-01 Circuit Board Puller
713Phone: 800 530 9444 Fax: 800 393 0323 www.essentracomponents-toolsupply.comPhone: 800 621 1892 Fax: 773 539 6770 www.essentracomponents.comPhone: 800 551 2052 Fax: 866 642 4115 www.essentracomponents.comPhone: 800 847 0486 Fax: 866 561 6617 www.essentracomponents.com
• Strong and rigid with optimum leverage to assist in extraction• RRP roll pin is supplied for mounting (see bottom of page)
Item No. “D” “L”
Bulk PackQty.
RRP-250 .093 (2.4) .250 (6.4) 100RRP-312 .093 (2.4) .312 (8) 100RRP-375 .125 (3.2) .375 (9.5) 100
RRPPCB Round Roll Pin
CCP-1-01Circuit Board Puller
Item No. Accepts PCB Thickness
Bulk PackQty.
CCP-1-01 .062 (1.6) 500
• Curved tab provides fingertip grip for board insertion and extraction
• Material: UL94 V-2 Nylon 6/6• Color: Natural
Recommended Mounting Holes
Fig. 1
R1107Inserter/Extractor
Fig. 1 Fig. 2
Item No. “S” “W” “L1”
PCB Thickness Fig.
Roll Pin Supplied
Bulk Pack Qty.
R1107-062 .075 (1.9) .29 (7.4) 2.0 (50.8) .062 (1.6) 1 RRP-250 100R11073-062 .075 (1.9) .35 (8.9) 2.0 (50.8) .062 (1.6) 1 RRP-312 100R11073-093 .100 (2.5) .35 (8.9) 2.0 (50.8) .093 (2.4) 1 RRP-312 100R110710-062 .075 (1.9) .29 (7.4) 1.5 (38.1) .062 (1.6) 2 RRP-250 100R1107310-093 .100 (2.5) .35 (8.9) 1.5 (38.1) .093 (2.4) 2 RRP-312 100
Typical Application
R1001/R1002/R1209Inserter/Extractor
Item No. “S” PCB Thickness Fig. Roll Pin
Bulk PackQty.
R1001-062 .075 (1.9) .062 (1.6) 1 RRP-250 100R1002-093 .100 (2.5) .093 (2.4) 1 RRP-250 100R1209-062 .075 (1.9) .062 (1.6) 2 RRP-375 100R1209-093 .100 (2.5) .093 (2.4) 2 RRP-375 100
Typical Application
• Strong and rigid with optimum leverage to assist in both insertion and extraction
• RRP roll pin is supplied for mounting (see page 712)• Material: UL94 V-2 Nylon 6/6• Color: Natural
Typical Application
Fig. 2
• Material: UL94 V-0 Glass Filled Nylon 6/6 • Color: Natural
CARD INSERTER, EJECTOR & PULLER
Pages 0712 - 0721.indd 713 11/6/2013 4:30:39 PM