Vertical Machining Centers - Bulmakmetal...
Transcript of Vertical Machining Centers - Bulmakmetal...
Vertical Machining Centers
1 2
Thermo-FriendlyConcept
Collision AvoidanceSystem
MachiningNavi
Vertical Machining Centers
Highly rigid slide guideway structure for powerful cutting and reduced cycle timeThermo-Friendly Concept enables improved productivity with high dimensional stability
Premium DesigningHarmonious human-machine interaction produces new forms.Add to that, reliably cultivated and sustainable innovation from a comfortable work place found in a pleasing factory environment.With superior quality and value, Premium Designing has begun.
Photos shown in this brochure may also show optional equipment.
3 4
■ Bed columnStrong base column construction has optimally-placed ribs to counter chatter and twisting during heavy-duty cutting. Traditional box ways is used for all axes to give high accuracy and rigidity over the long term.
0
500
1,000
500
1,00
0
1,50
0
2,00
0
2,50
0
3,00
0
MILLAC 761V
Spindle speed [min-1]
Motor output (OSP)
Motor output (FANUC)
Spindle speed [min-1]
Motor output (OSP)
Motor output (FANUC)
Spindle speed [min-1]
Motor output (OSP)
Motor output (FANUC)
Spindle speed [min-1]
Motor output (OSP)
Motor output (FANUC)
50 to 15,000
26/18.5 kW
22/18.5 kW
60 to 6,000
18.5/11 kW
18.5/11 kW
80 to 12,000
22/18.5 kW
22/18.5 kW
60 to 10,000
22/18.5 kW
22/18.5 kW
30 to 6,000
15/11 kW
15/11 kW
20 to 4,000
15/11 kW
15/11 kW
50 to 15,000
26/18.5 kW
22/18.5 kW
50 to 12,000
26/18.5 kW
22/18.5 kW
20 to 4,000
18.5/15 kW
18.5/15 kW
30 to 6,000
18.5/15 kW
18.5/15 kW
20 to 4,000
22/18.5 kW
22/18.5 kW
30 to 6,000
22/18.5 kW
22/18.5 kW
Integralmotor/spindle
Integralmotor/spindle
Gear
No.40
No.50
MILLAC 468V MILLAC 561V MILLAC 611V MILLAC 761V MILLAC 852V MILLAC 1052V
Diverse lineup to meet all kinds of needs
Reassuring high-rigidity construction gives powerful, high-speed heavy-duty cutting
Note: Platform raised machine may be required with some applications.
■ Recommended Chip Conveyors (Please contact an Okuma sales representative for details.)
■ Spindle specifications
■ Off-machine lift-up chip conveyors
Workpiece material Steel
Chip shape
In-machine
Off-machine
Screw type
Hinge type
Scraper type
Scraper type (with drum �lter)
Hinge + scraper (with drum �lter)
FC Aluminum / Nonferrous Mixed (general use)
—
—
(*1)
—
(Dry)
(Wet) with magnet
(Wet) (*2)
—
—(*3)
(*4)
—
—
Name
Shape
Hinge type Scraper type Scraper type (with drum �lter) Hinge + scraper (with drum �lter)
: Recommended : Recommended with conditions
Highly rigid construction*1. When there are many �ne chips *2. When chips are longer than 100 mm *3. When chips are shorter than 100 mm *4. When there are few �ne chipsNote: Fire prevention measures are necessary, as use of oil-based coolant may cause �re.
Trying to cool beyond what is reasonable to limit thermal deformation
5 6
0 4 8 12 16 20 24
28°C
8°C20°C
—20.0—10.0
0.010.020.0
18222630
0 3 6 9 12 15 18 21 24
—20.0—10.0
0.010.020.0
18222630
28°C
8°C20°C
OSP-P300
The innovation that accepts temperature changes Thermo-Friendly Concept*
Thermo-FriendlyConcept
Thermo-Friendly Concept
Machine coversPeripheral equipment placementMachine “hot spots” diffused
Machine designs thatequalize ambient
temperatures
Symmetrically builtThick walls
Simple machlneconstruction
TAS-CTAS-S
Highly Accurate Compensation Technology
1. Minimal thermal deformation
2. Manageable thermal deformation
3. Accurate compensation
TAS-C: Thermo Active Stabilizer – Construction*TAS-S: Thermo Active Stabilizer – Spindle*
Super thermostability minimizes machiningdimensional changes over time
*MILLAC 468V /561V have optional speci�cations.MILLAC 611V /761V /852V /1052V have standard speci�cations.
Time (H)
MILLAC 561V uses thermo active stabilizer—construction (TAS-C) (Opt)
Sample machining dimensional change over time: / 8ºC change in room temperature
Sample machining dimensional change over time: / 8ºC change in room temperature
Dim
ensi
onal
cha
nge
(μm
)
Roo
m t
emp
erat
ure
(ºC
)
Time (H)
Dim
ensi
onal
cha
nge
(μm
)
Roo
m t
emp
erat
ure
(ºC
)
* The “actual data” referred to above for this brochure represent examples, and may not be obtained due to differences in specifications, tooling, cutting, and other conditions.
* Positioned on X, Y, and X directions and machined with ø10 carbide end mill at 4,000 min-1
Measurement position: Table center with use of coolant.Data are with full enclosure shielding specifications.
* Data are with full enclosure shielding specifications.
MILLAC 1052V (X-axis travel 2,050 mm specs)
X axisY axisZ axis
Y: 13 μm
Z: 11 μm
X: 3 μm
X: 6 μm Z: 8 μm Y: 6 μmWith TAS-C
■ World’s first “Collision-Free Machine”CAS prevents collisions in automatic or manual mode, providing risk-free protection for the machine and great con�dence for the operator.
Okuma Intelligent Technology for competitive machine shops
IntelligentTechnology
Collision Avoidance SystemCollision prevention
■ Finding the best cutting conditions quicklySensors built in to the machine detect and analyze machining chatter. Machining Navi then navigates to the effective measures in a wide range of spindle speeds, from low to high.
Machining Navi M-i (Optional: OSP-P300M only)
Cutting condition search for milling
■ Adjust cutting conditions while monitoring the dataBased on the chatter noise captured by the microphone, Machining Navi displays a number of optimal spindle speed possibilities on the screen. The operator can change to the indicated spindle speed with a single touch and immediately con�rm the result.
Machining Navi M-g (Optional: OSP-P300M only)
Cutting condition search for milling
Chatter
Select and con�rm any of anumber of possible spindlespeeds with a single touch
Machining NaviON
Machining NaviOFF
Machining Navi(OSP) provides the
answer!
This sign indicates a change to the optimum spindle speed.
This sign indicates that spindle speed is being changed.
This sign indicates that the cutting load needs to be reduced.
(Optional: OSP-P300M only)
Thermo-Friendly Concept
Collision Avoidance System Machining Navi
7 8
Communication
Getting the best from human operators and advanced machine tools
Human-machineinteraction
Okuma Control OSP-P300M Interactive operations for machining centers (Optional) Advanced One-Touch IGF-M
Satisfaction from complete control of a machine toolAs a “machine & control” builder, Okuma makes further strides in machine tool manufacturing with
this superb control featuring "Easy Operation." Okuma took a close look at the way machinists
actually operate machine tools, to help them create smoother and more effective ways of producing
parts. Novice operators as well as professional machinists get complete control—and satisfaction.
Moreover, what you want to see and do conveniently come together in a “single-mode operation.”
First, select one of three operation screens. Then simply touch the screen or press a function key to
see and do your job.
With spreadsheet simplicity —tool offsets, tilt, shape, life, etc—all the tool data required to cut a part can be registered here.Since the registered tool data is also used by Okuma auto programming (Advanced One-Touch IGF) and a collision check function (Collision Avoidance System), this screen will complete the entire registering process.
The touch sensor screen pops up from the tool registration screen. Tool compensation values are set while looking at a guidance message.
Easy tool registration
Machining processes can be newly added or revised on the Machining Order Table. Each process can be set freely with tool units, and know-how can be input with the edit function with a high degree of freedom. The recommended value is automatically set when new additions are made.
■ The objective: simple programming
■ Tool path, cutting conditions...
■ Approach/relief, cutting depth movement
Key items changed directly on Machining Order Table
Details are established in window
Processes can be added or have their order changed for each tool
on the Machining Order Table
Can be operated directly from Machining Order Table.When a problem is detected it can be quickly corrected and checked, speeding up �rst part machining.
Selectedoverall
Selectedrange
Mid-/singlecycle start
Tool path, cutting conditions... Approach/relief, cutting depth movement
■ Simple operations for 1st part machining jobs
Mid-/single cycle start by simply selecting target on Machining Order Table
Immediate editing from Machining Order Table
■ Setup operations
■ Trial/continuous cuts■ Programming ■ Tool preparations
9 10
Tank removal
Thermo-FriendlyConcept
Collision AvoidanceSystem
MachiningNavi
� Machine Specifications
� Spindle torque/output graphs
� Dimensional drawing/Installation drawing
Vertical Machining Center
Photos shown in this brochure may also show optional equipment.
[ ] : Optional
Travels
Table
Spindle
Feedrate
Motors
ATC
Machine size
Control
X axis (table R/L)Y axis (table F/B)Z axis (spindle U/D)Table top to spindle noseWork surfaceFloor to table topMax load capacityColumn to spindle centerSpindle speedSpeed rangesTapered boreBearing diaRapid traverseCutting feedrateSpindle
Tool storageMax tool dia (w, w/o adj tool)Max tool lengthMax tool weightHeightFloor spaceWeight
mm (in.)mm (in.)mm (in.)mm (in.)mm (in.)mm (in.)kg (lb)
mm (in.)min-1
mm (in.)m/min (fpm)
mm/min (ipm)
kW (hp)
toolmm (in.)mm (in.)kg (lb)
mm (in.)mm (in.)kg (lb)
No. 50 SpecsMILLAC 468V
No. 40 Specs
60 to 6,000
7/24 taper No. 50ø90 (3.54)
OSP 18.5/11 (25/15) (15%ED/cont)FANUC 18.5/11 (25/15) (40%ED/cont)
20 (44)
50 to 15,000
7/24 taper No. 40ø70 (2.76)
OSP 26/18.5 (35/25) (10 min/cont)FANUC 22/18.5 (30/25) (15 min/cont)
10 (22)
820 (32.28)460 (18.11)450 (17.72)
150 to 600 (5.91 to 23.62) 1,050 × 460 (41.34 x 18.11)
930 (36.61)500 (1,100)510 (20.08)
Stepless (integral motor/spindle)
X-Y: 32, Z: 24 (X-Y: 105, Z: 79 )X-Y-Z: 15,000 (591)
20 [30]ø120/ø150 (ø4.72/ø5.91)
350 (13.78)
2,790 (109.84)OSP: 2,265 × 2,805 (89.17 x 110.43), FANUC: 2,200 × 2,780 (86.61 x 109.45)
6,000 (13,200)OSP-P300M, FANUC 31i-B
UnitItem
No. 50 6,000 min-1 spindle (OSP)Maximum output: 18.5/11 kW (15%ED/cont)Maximum torque: 326/175 N-m (15%ED/cont)
No. 50 6,000 min-1 spindle (FANUC)Maximum output: 18.5/11 kW (40%ED/cont)Maximum torque: 326/175 N-m (15%ED/cont)
No. 40 15,000 min-1 spindle (OSP)Maximum output: 26/18.5 kW (10 min/cont)Maximum torque: 199/146 N-m (10 min/cont)
Spindle speed min-1
11 kW (cont)
18.5 kW (cont)
15 kW (10 min)26 kW (10 min)
100
720 2,500 4,000
15,000
50 500 1,000 5,000 10,000
100
500
1,000
10
100
50
10
5
1
146 N-m (cont)
199 N-m (10 min)
Spindle speed min-1
18.5 kW (15%ED)
11 kW (cont)
7.5 kW (cont)
100
60 410
785
1,150 6,000
50 500 1,000 5,000
100
500
1,000
10
100
50
10
5
1
175 N-m (cont)
91 N-m (cont)326 N-m (15%ED)
154 N-m (15%ED)
Spindle speed min-1
18.5 kW (40%ED)
7.5 kW (15%ED)
5.5 kW (cont)
100
60 220 425
300 850 3,250
3,000 6,000
50 500 1,000 5,000
100
500
1,000
10
100
50
10
5
1
175 N-m (cont)
124 N-m (cont)326 N-m (15%ED)
208 N-m (40%ED)
11 kW (cont)
14 kW (15%ED)
Out
put
Torq
ue
N-m kW
Out
put
Torq
ue
N-m kW
Out
put
Torq
ue
N-m kW
2,51
0
2,060 (81.10)90
(3.54)
415
835
535
105
2,200 (86.61)
830
640 (25.20)175 (6.89)
3,015 (118.70)
210
[140
]
(8.2
7 [5
.51]
)
295
[270
]
3,01
5 [2
,920
] (11
8.70
[114
.96]
)
2,80
5 [2
,780
] (82
.09
[109
.45]
)
2,805 [2,780] (82.09 [109.45])120 (4.72)2,510 (98.82)
46050 to 510
295 [270](11.61 [10.63])
(Y-axis travel 460)
85
510
510 (20.08)
1,26
0 (4
9.61
)93
0 (3
6.61
)15
0 (5
.91)
2,79
0 (1
09.8
4)
840
(33.
07)
450
(17.
72)
Z-a
xis
trav
el
855 (33.66) (door opening)
410X-axistravell
2,37
0 (9
3.31
)
2,265 [2,200] (89.17 [86.61] )2,200 (86.61)
1,050
65 [0]
No. 50 6,000 min-1,OSP-P300M specs[ ]: FANUC specs
Electrical wiring inlet 3-ø42 hole (H = 850 from §oor) (Electric cabinet bottom face)
Air intake Rc 3/8(H = 1,295 from §oor)
Foundation blocks (6)
(coolant tank removal dimensions)
410 (16.14)X-axis travel
11 12
CNC
Spindle speed
Spindle nose constraint
Spindle cooling system
ATC magazine
ATC air blower
Full-enclosure
Slideway lubricating equipemnt
OSP-P300M
FANUC 31i-B
60 to 6,000 min-1 No. 50
Spindle motor 18.5/11 kW
50 to 15,000 min-1 No. 40
Spindle motor 26/18.5 kW (OSP)
22/18.5 kW (FANUC)
BIG-PLUS® (No. 50)
Oil controller
20 tools
With ceiling
Specifications Remarks
In-machine conveyor
Chip pan
Coolant supply system
Coolant nozzle
Work lamp
Spindle air curtain
Air cleaner (�lter)
Door interlock
Pulse handle
Electronic buzzer
Foundation blocks / Jack bolts
Tool / Tool box
Tool release lever
Gutter: Coil type (1 each left and right)
Tank: 200 L, Pump motor: 180 W
3 �exible nozzles
LED
Including regulator
Single axis, switchable
At operation end and alarm times
Hand tools
Specifications Remarks
Specifications Remarks Specifications Remarks
■ Max tool size (adjacent tools)
■ Maximum tools used (w/o adjacent tools)
■ Max tool size (adjacent tools)
■ Maximum tools used (w/o adjacent tools)
No.40 No.50
ø150
(ø5.
91)
ø44.
45(ø
1.75
)
350 (13.78)
(*1)
ø120
(ø4.
72)
ø44.
45(ø
1.75
)
350 (13.78)
35 (1.38)
35 (1.38)
ø63
(ø2.
48)
(*1)
ø120
(ø4.
72)
ø69.
85(ø
2.75
)
350 (13.78)
50 (1.97)
50 (1.97)
ø100
(ø3.
94)
(*1)
ø69.
85(ø
2.75
)
(*1)
ø150
(ø5.
91)
350 (13.78)
80(3
.15)
80(3
.15)
100
(3.9
4)10
0(3
.94)
100
(3.9
4)
1,050 (41.34)
460
(18.
11)
30 (1.18)
T-slot detail
18H8
20(0
.79)
12(0
.47)46
0 (1
8.11
)460 (18.11) 125 8522 (0.87)
SpindleZ-axis Slide Cover
Z-axis slideway
Table
482 (18.98)
Z-ax
is tr
avel
450
150
(17.
71)
(5.9
1)
Inside of full enclosureshielding
Inside of full enclosureshielding
Outside of full enclosureshielding
585 (23.03)
Spindle
X-axis travel 410140 X-axis travel 410
Z-ax
is tr
avel
450
150
(5.9
1)
[350
](1
3.78
)(1
7.71
)
Table
1401,050 (41.34)
[ ]: High column specs
■ Machining Capacity ■ Maximum tool dimensions
■ Table size
■ Working range
■ Standard Specifications · Accessories
■ Optional Specifications · Options
(Material : S45C)
Tool
ø125 face mill8 blades
148 (485.59)360 (21.98) 800 (31.50)5 (0.20) 90 (3.54)
Cutting Capacity(cm3/min) (in3/min)
Cutting Speed(m/min) (fpm)
Feedrate(mm/min) (ipm)
Cutting Depth(mm) (in.)
Cutting Width(mm) (in.)
No.50 Spindle 6,000 min-1
integral motor
Data listed in the catalog are actual data. These values may not be obtained depending on speci�cations, tooling, and cutting conditions and other factors.
0.5 MPa, 1.5 MPa
Okuma pull stud for 1.5 MPa, 1.5 MPa
large capacity, and 7 MPa required.
3-axis round handle, 3-axis round handle +
1-axis mobile type switch
OSP has synchronized tapping
Oil pan: chip �usher type
Hinge conveyor, scraper conveyor
See recommended chip conveyor speci�cations, P4.
Tilt with/without
20 mm
BIG-PLUS® (No. 40)
NC, tilt, indexing
+ 200 mm, including full enclosure
shielding for high columns
30 tools (both No. 40, No. 50)
1,050 × 460 × 70 mm
X-Y-Z axis
X-Y-Z axis
Infrared communication type
Touch type
Forms set together with below options.
High column 200 mm
Pallet size 820 × 460 mm
Tap pallet, T-slot pallet
Hydraulic unit (APC drive)
ATC magazine
Sub table
Reference tool
Ring gauge
AbsoScale detection (OSP)
Scale feedback (FANUC)
Auto gauging, auto zero offset
Auto tool lengh compensation/auto
tool breakage detection function
TAS-S: Thermo Active dimension
Stabilizer – Spindle (OSP)
TAS-C: Thermo Active dimension
Stabilizer – Construction (OSP)
Spindle thermal deformation
compensation (FANUC)
Ambient thermal deformation
compensation (FANUC)
Rotary 2-pallet APC
Status indicator
Chip air blower
Auto power shut-off
Oil-hole coolant system
Thru-spindle coolant
Thru-spindle semi-dry device
Auto open/close front cover
Pulse handle
Rigid tapping
In-machine chip discharge
Off-machine chip
discharge
Chip bucket
Raised machine
Angle head preps
Manual clamp �xture
Hydraulic and pneumatic �xtures
Spindle nose constraint
Rotary table
High column
(*1): Interference with outer part of ATC tool change arm and tooling may occur with commercially available milling chucks, etc.Always be sure to check dimensions in tooling catalogues or other literature.
Y-axistravel 230
(9.06) (9.06) (4.92) (3.35) (5.51) (5.51)(16.14) (16.14)
Y-axistravel 230
13 14
Thermo-FriendlyConcept
Collision AvoidanceSystem
MachiningNavi
■ Machine Specifications
■ Spindle torque/output graphs
■ Dimensional drawing/Installation drawing
Vertical Machining Center
Photos shown in this brochure may also show optional equipment.
[ ] : Optional
No. 50 6,000 min-1 No. 50 10,000 min-1
MILLAC 561VNo. 40 12,000 min-1
30 to 6,0002 ranges
15/11 (20/15) (30 min/cont)
2,755 (108.46)
7/24 taper No. 50ø100 (3.94)
20 [30, 40]ø120/ø150 (ø4.72/ø5.91)
350 (13.78)20 (44)
80 to 12,000
7/24 taper No. 40ø70 (2.76)
20 [40]ø90/ø115 (ø3.54/ø4.53)
300 (13.78)8 (11)
2,825 (111.22)
1,050 (41.34)560 (22.05)520 (20.47)
170 to 690 (6.69 to 27.17)1,350 × 560 (53.15 x 22.05)
950 (37.40)1,000 (2,200)590 (23.23)
60 to 10,000
X-Y: 32, Z: 24 (X-Y: 105, Z: 79) X-Y-Z: 15,000 (591)
2,930 (115.35)2,650 × 3,285 (104.33 × 129.33)
7,000 (15,400)OSP-P300M, FANUC 31i-B
Stepless (integral motor/spindle)
22/18.5 (30/25) (15 min/cont)
Travels
Table
Spindle
Feedrate
MotorsATC
Machine size
Control
X axis (table R/L)Y axis (table F/B)Z axis (spindle U/D)Table top to spindle noseWork surfaceFloor to table topMax load capacityColumn to spindle centerSpindle speedSpeed rangesTapered boreBearing diaRapid traverseCutting feedrateSpindleTool storageMax tool dia (w, w/o adj tool)Max tool lengthMax tool weightHeightFloor spaceWeight
UnitItem
mm (in.)mm (in.)mm (in.)mm (in.)mm (in.)mm (in.)kg (lb)
mm (in.)min-1
mm (in.)m/min (fpm)
mm/min (ipm)kW (hp)
toolmm (in.)mm (in.)kg (lb)
mm (in.)mm (in.)kg (lb)
No. 50 6,000 min-1 spindle (OSP, FANUC)Maximum output: 15/11 kW (30 min/cont)Maximum torque: 376/276 N-m (30 min/cont)
No. 50 10,000 min-1 spindle (OSP)Maximum output: 23.7/18.5 kW (3 min/cont)Maximum torque: 205/125 N-m (3 min/cont)
No. 50 10,000 min-1 spindle (FANUC)Maximum output: 22/18.5 kW (15 min/cont)Maximum torque: 204/119 N-m (25%ED/cont)
10060
865 1,200 3,500
500 1,000 5,000
100
10
10
5
1
10,000
22 kW (15 min)
18.5 kW (15 min)
15 kW (cont)
18.5 kW (cont)
2,500
204 N-m (25%ED)147 N-m (15 min)
119 N-m (cont)
276 N-m (cont)
376 N-m (30 min)
15 kW (30 min)
11 kW (cont)
30 100
381 1,348 1,696
500 1,000 5,000
100
10
10
5
1
6,000
60 100
1,100 2,000
500 1,000 5,000
100
10
10
5
1
23.7 kW (3 min)
10,000
205 N-m (3 min)151 N-m (15 min)
125 N-m (cont)
22 kW (15 min)
17.5 kW (15 min)
14.5 kW (cont)18.5 kW (cont)
1,500
500
1,000 100
50 500
1,000 100
50 500
1,000 100
50
Spindle speed min-1Spindle speed min-1 Spindle speed min-1
Out
put
Torq
ue
N-m kW
Out
put
Torq
ue
N-m kW
Out
put
Torq
ue
N-m kW
Air intake Rc 3/8 0.5MPa(H = 1,420 from §oor)
No. 50 6,000 min-1 specs
480(18.90)2,650 (104.33)
3,130 (123.23)
1,000
790210
1,140
165
(6.5
0)2,
235
(87.
99)
215
(8.4
6)1,
130
(44.
49)
695
(27.
36)
195
(7.6
8)
Jack bolt (6 locations)
205
(8.07
)3,
490
(137
.40)
3,28
5 (1
29.3
3)
2,96
0
1,10
510
0(3
.94)
80
250(9.84)
500(19.69)
575(22.64)
1,75
5
325
325(12.80)
950
(37.
40)
170
to 6
90(Z-
axis
trave
l 520
)1,
115
(43.
90)
2,75
5 (1
08.4
6)
560
Air unit
Coolant tank
50 to 610(Y-axis travel 560)
2,960 (116.54)
3,285 (129.33)
X-axis travel525 1,350
2,650 (104.33)
X-axis travel525
1,325 (52.17)1,325 (52.17)
940
(37.
01)
915
(36.
02)
Operation panel
535 (21.06)1,000 (39.37)1,115 (43.90)(door opening)
Electrical wiring inlet 3-ø42 hole (H = 935 from §oor) (Electric cabinet bottom face)
Tank removal
80
15 16
No. 50 spindle 6,000 min-1
2-speed gear headø125 face mill,
6 blades
No.50 Spindle 10,000 min-1
integral motor (options)ø80 face mill,
6 blades
No.40 Spindle 12,000 min-1
integral motor (options)ø100 face mill,
5 blades
252 (15.38)
588 (35.90)
350 (21.37)
120 (393.72)
250 (820.25)
170 (557.77)
7 (0.28)
5 (0.20)
5 (0.20)
90 (3.54)
56 (2.20)
70 (2.76)
400 (15.75)
2,100 (82.68)
1,000 (39.37)
CNC
Spindle speed
Spindle nose constraint
Spindle cooling system
ATC magazine
ATC air blower
Full-enclosure
Slideway lubricating equipemnt
In-machine conveyor
Chip pan
OSP-P300M
FANUC 31i-B
30 to 6,000 min-1 No. 50
Spindle motor 15/11 kW
BIG-PLUS®
Oil controller
20 tools
With ceiling
Gutter: chip �usher type
Coolant supply system
Coolant nozzle
Work lamp
Spindle air curtain
Air cleaner (�lter)
Door interlock
Pulse handle
Electronic buzzer
Foundation blocks / Jack bolts
Tool / Tool box
Tool release lever
Tank: 200 L, Pump motor: 180 W
3 �exible nozzles
LED
Including regulator
Single axis, switchable
At operation end and alarm times
Hand tools
■ Max tool size (adjacent tools) ■ Maximum tools used (w/o adjacent tools)
No.50
350 (13.78)
ø100
(ø3.
94)
ø150
(ø5.
91)
(*1)
50(1.97)
50 (1.97) 350 (13.78)
ø100
(ø3.
94)
ø120
(ø4.
72)
(*1)
30 (1.18)
T-slot detail
18H8
20(0
.79)
12(0
.47)56
0 (2
2.05
)
1,350 (53.15)
80(3
.15)
80(3
.15)
100
(3.9
4)10
0(3
.94)
100
(3.9
4)10
0(3
.94)
560
(22.
05)
X-axis travel 525 X-axis travel 525
Table
1,350 (53.15)
Z-axis Slide Cover
Y-axistravel 280
(11.02) (11.02)27.5(1.08)
560 (22.05)
22.5(0.89)
Spindle
Z-axis slideway
Table20 (0.79)
590 (23.23)
Y-axistravel 280
Z-a
xis
trav
el 5
2017
0(2
0.47
)(6
.69)
[ ]: High column specs
Spindle
(20.
47)
(6.6
9)Z
-axi
s tr
avel
520
170
[370
](1
4.57
)
Specifications Remarks Specifications Remarks
Specifications Remarks Specifications Remarks
■ Machining Capacity ■ Maximum tool dimensions
■ Table size
■ Working range
■ Standard Specifications · Accessories
■ Optional Specifications · Options
Data listed in the catalog are actual data. These values may not be obtained depending on speci�cations, tooling, and cutting conditions and other factors.
(*1): Interference with outer part of ATC tool change arm and tooling may occur with commercially available milling chucks, etc.Always be sure to check dimensions in tooling catalogues or other literature.
No. 50 integral motor/spindle
22/18.5 kW
No. 40 integral motor/spindle
22/18.5 kW
40 tools; 30 tools possible with No. 50 spindle only
Nozzle type
370 W
Ring type
Nozzle type
0.5 MPa, 1.5 MPa
Okuma pull stud for 1.5 MPa, 1.5 MPa
large capacity, and 7 MPa required.
Oil pan: oil pan washer
Gutter: Coil type, 1 each left and right
Hinge conveyor, scraper conveyor
See recommended chip conveyor speci�cations, P4.
Tilt with/without
50 mm
Belt type
NC, slope, orientation
1,350 × 560 × 90 mm
+200 mm
Infrared communication type
Touch type
X-Y-Z axis
X-Y-Z axis
Forms set together with below options.
High column 200 mm
Pallet size 1,150 × 520 mm
Tap pallet, T-slot pallet
Hydraulic unit (APC drive)
Reference tool
Ring gauge
Angle head preps
Manual clamp �xture
Hydraulic and pneumatic �xtures
High column
Auto gauging, auto zero offset
Auto tool lengh compensation/auto
tool breakage detection function
TAS-S: Thermo Active dimension
Stabilizer – Spindle (OSP)
TAS-C: Thermo Active dimension
Stabilizer – Construction (OSP)
Spindle thermal deformation
compensation (FANUC)
Ambient thermal deformation
compensation (FANUC)
AbsoScale detection (OSP)
Scale feedback (FANUC)
Status lamp
Foundation bolt
Parallel 2-pallet APC
Spindle speed
10,000 min-1
Spindle speed
12,000 min-1
ATC magazine
Chip air blower
Coolant pump
Coolant nozzle
Semi-dry unit
Coolant level sensor
Coolant temperature regulator
Oil hole device
Thru-spindle coolant
In-machine chip
discharge
Off-machine chip
discharge
Chip bucket
Raised machine
Workpiece washing gun
Air gun mount
Oil skimmer
Mist collector
Auto open/close front cover
Rotary table
Sub table
ø69.
85(ø
2.75
)
ø69.
85(ø
2.75
)
(20.67) (20.67)
ToolCutting Capacity
(cm3/min) (in3/min)Cutting Speed(m/min) (fpm)
Feedrate(mm/min) (ipm)
Cutting Depth(mm) (in.)
Cutting Width(mm) (in.)
(Material : S45C)
17 18
This operation panel is standard.
Thermo-FriendlyConcept
Collision AvoidanceSystem
MachiningNavi
■ Machine Specifications
■ Spindle torque/output graphs
■ Dimensional drawing/Installation drawing
Vertical Machining Center
Photos shown in this brochure may also show optional equipment.
No. 50 6,000 min-1No. 50 4,000 min-1
MILLAC 611VNo. 40 15,000 min-1No. 50 12,000 min-1
20 to 4,0002 ranges
ø100 (3.94)
15/11 (20/15) (30 min/cont)
3,410 × 3,695 (134.25 x 145.47)
50 to 15,000
7/24 taper No. 40ø70 (2.76)
ø115/ø115 (ø4.53/ø4.53)300 (11.81)
8 (11)
1,300 (51.18)610 (24.02)560 (22.05)
200 to 760 (7.87 to 29.92)1,600 × 610 (62.99 × 24.02)
900 (35.43)1,500 (3,300)650 (25.59)
X-Y: 20, Z: 16 (X-Y: 66, Z: 52)X-Y-Z: 10,000 (394)
20 [30, 42]
2,910 (114.57)
9,300 (20,460)OSP-P300M, FANUC 31i-B
50 to 12,000
ø90 (3.54)
30 to 6,000
7/24 taper No. 50
ø120/ø150 (ø4.72/ø5.91)400 (15.75)
20 (44)
Stepless (integral motor/spindle)
OSP:26/18.5 (35/25) (10 min/cont)FANUC:22/18.5 (30/25) (15 min/cont)
3,410 × 3,525 (134.25 x 138.78)
[ ] : Optional
Travels
Table
Spindle
Feedrate
Motors
ATC
Machine size
Control
X axis (table R/L)Y axis (table F/B)Z axis (spindle U/D)Table top to spindle noseWork surfaceFloor to table topMax load capacityColumn to spindle centerSpindle speedSpeed rangesTapered boreBearing diaRapid traverseCutting feedrateSpindle
Tool storageMax tool dia (w, w/o adj tool)Max tool lengthMax tool weightHeightFloor spaceWeight
mm (in.)mm (in.)mm (in.)mm (in.)mm (in.)mm (in.)kg (lb)
mm (in.)min-1
mm (in.)m/min (fpm)
mm/min (ipm)
kW (hp)
toolmm (in.)mm (in.)kg (lb)
mm (in.)mm (in.)kg (lb)
UnitItem
No. 50 4,000 min-1 spindle (OSP, FANUC)Maximum output: 15/11 kW (30 min/cont)Maximum torque: 512/376 N-m (30 min/cont)
No. 50 6,000 min-1 spindle (OSP, FANUC)Maximum output: 15/11 kW (30 min/cont)Maximum torque: 376/276 N-m (30 min/cont)
276 N-m (cont)
376 N-m (30 min)
15 kW (30 min)
11 kW (cont)
30
100
381 1,348 1,696
50 500 1,000 5,000
100
10
10
5
1
6,000
No. 50 12,000 min-1 spindle (OSP)Maximum output: 26/18.5 kW (10 min/cont)Maximum torque: 199/146 N-m (10 min/cont)
11 kW (cont)
18.5 kW (cont)
15 kW (10 min)26 kW (10 min)
100
720 2,500 4,000
12,000
50 500 1,000 5,000 10,000
100
500
10
50
10
5
1
146 N-m (cont)
199 N-m (10 min)376 N-m (cont)
512 N-m (30 min)
15 kW (30 min)
11 kW (cont)
50
100
28020
899
4,0001,246
50 500 1,000 5,000
100
500
10
10
1
1,000 100 1,000 100 1,000 100
50500
Spindle speed min-1Spindle speed min-1 Spindle speed min-1
Out
put
Torq
ue
N-m kW
Out
put
Torq
ue
N-m kW
Out
put
Torq
ue
N-m kW
2,18
5 (8
6.02
) (b
ed le
ngth
)
255
(10.
04)
1,11
0(4
3.70
)71
5(2
8.15
)35
(1.3
8)
70 (2
.76)
310
(12.
20)
650
(25.
59)
Leveling block
3,69
5 (1
45.4
7)
1,87
5 (7
3.82
)1,
100
(43.
31)
(5.5
1)14
0
80(3
.15)
30 (1
.18)
3,14
5 (1
23.8
2)55
0(2
1.65
)
790315 420
526(20.71)
620(24.41)
710(27.95)
1,350 (bed width)
Electrical wiring inlet ø42 hole (H = 920 from ¦oor)
1,250
3,410 (134.25) 160 (6.30)
3,570 (140.55)
3,695 (145.47)3,145 (123.82)
550(21.65)
2,495650
650
610
2,84
0 (1
11.8
1)
2,91
0 (1
14.5
7)
2,76
0
2,74
020
(0.7
9)88
0
60 to670
200
to 7
60(Z
-axi
s tr
avel
560
)
650 (25.59)X-axis travel
650 (25.59)X-axis travel
1,415 (55.71) (door opening)
3,410 (134.25)
1,600 (62.99)
No. 50 4,000/6,000 min-1 specs
(Electric cabinet bottom face)
Tankremoval
Air intake Rc 3/8(H = 1,200 from ¦oor)
19 20
304 (18.56) 120 (393.72) 675 (26.57)5 (0.20) 90 (3.54)■ Max tool size (adjacent tools) ■ Maximum tools used (w/o adjacent tools)
No.50
50(1.97)
400 (15.75)
ø150
(ø5.
91)ø6
9.85
ø100
(ø3.
94)
50 (1.97)(35) (1.38)
400 (15.75) (300) (11.81)
(ø4.
72)
ø120
(ø11
5)(ø
4.53
)
(ø3.
94)
ø100
(ø63
)(ø
2.48
)
(ø2.
75)
(ø2.
75)
ø69.
85
(ø44
.45)
(ø1.
75)
(*1)(*1)
85 (3.3
5)85 (3.3
5)11
0(4
.33)
110
(4.3
3)11
0(4
.33)
110
(4.3
3)
1,600 (62.99)
610
(24.
02)
45 (1
.77)
655
(25.
79)
610
(24.
02)
30 (1
.18)
15 (0
.59)
30(1.18)
T-slot detail
18H8
20(0
.79)
12(0
.47)
Spindle
X-axis travel 650(25.59)
X-axis travel 650(25.59)
Table
1,600(62.99)
Y-axis travel 610(24.02)
60(2.36)
610(24.02)
30 (1.18)
Z-axis Slide Cover
Z-axis slideway
Table20 (0.79)
650 (25.59)
Z-a
xis
trav
el 5
60(2
2.05
)(7
.87)
200
(400
)(1
5.75
)
Z-a
xis
trav
el 5
60(2
2.05
)(7
.87)
200
[400
](1
5.75
)
[ ]: High column specs
Specifications Remarks Specifications Remarks
■ Machining Capacity ■ Maximum tool dimensions
■ Table size
■ Working range
■ Optional Specifications · Options
Data listed in the catalog are actual data. These values may not be obtained depending on speci�cations, tooling, and cutting conditions and other factors.
Speci�cations in parentheses are No. 40 (15,000 min-1 specs). Same without adjacent tool.(*1): Interference with outer part of ATC tool change arm and tooling may occur with commercially available milling chucks, etc.
Always be sure to check dimensions in tooling catalogues or other literature.
No. 50 spindle 4,000 min-1
2-range gear headø125 face mill,
6 blades
No. 50 2-speed gear head 15/11 kW
No. 50 integral motor/spindle
26/18.5 kW (OSP)
22/18.5 kW (FANUC)
No. 40 integral motor/spindle
26/18.5 kW (OSP)
22/18.5 kW (FANUC)
30 tools, 42 tools
Nozzle type
370 W
Ring type
Nozzle type
0.5 MPa, 1.5 MPa
Okuma pull stud for 1.5 MPa, 1.5 MPa
large capacity, and 7 MPa required.
Coil-type chip conveyor Table rear
Oil pan part
Hinge conveyor, scraper conveyor
See recommended chip conveyor speci�cations, P4.
BIG-PLUS®
No. 50 12,000 min-1
No. 40 15,000 min-1
Tilt with/without
100 mm
NC, slope, orientation
1,600 × 610 × 90 mm
+200 mm
Infrared communication type
Touch type
X-Y-Z axis
X-Y-Z axis
Forms set together with below options.
High column 200 mm
Pallet size 1,400 × 580 mm
Tap pallet, T-slot pallet
Chip bucket
Raised machine
Workpiece washing gun
Air gun mount
Angle head preps
Manual clamp �xture
Hydraulic and pneumatic �xtures
Oil skimmer
Mist collector
Rotary table
Sub table
High column
Auto gauging, auto zero offset
Auto tool lengh compensation/auto
tool breakage detection function
Main operating panel
pendant type
AbsoScale detection (OSP)
Scale feedback (FANUC)
Status lamp
Foundation bolt
Parallel 2-pallet APC
Spindle speed
6,000 min-1
Spindle speed
12,000 min-1
Spindle speed
15,000 min-1
ATC magazine
Chip air blower
Coolant pump
Coolant nozzle
Semi-dry unit
Coolant level sensor
Coolant temperature regulator
Oil hole device
Thru-spindle coolant
In-machine chip discharge
In-machine chip ¨ushing
speci�cations
Off-machine chip
discharge
Spindle nose constraint
Specifications Remarks Specifications Remarks
■ Standard Specifications · Accessories
OSP-P300M
FANUC 31i-B
20 to 4,000 min-1 No. 50 (2-range gear drive)
Spindle motor 15/11 kW (30 min/cont)
BIG-PLUS®
(No.50 4,000, 6,000 min-1 specs)
Oil controller
20 tools
With ceiling
Tank: 350 L, Pump motor: 180 W
3 ¨exible nozzles
LED
CNC
Spindle speed
Spindle nose constraint
Spindle cooling system
ATC magazine
ATC air blower
Full-enclosure
Slideway lubricating equipemnt
Chip pan
Coolant supply system
Coolant nozzle
Work lamp
Spindle air curtain
Including regulator
Single axis, switchable
At operation end and alarm times
Hand tools
Air cleaner (�lter)
Door interlock
Pulse handle
Electronic buzzer
Foundation blocks / Jack bolts
Tool / Tool box
Tool release lever
Bed-mounted operation panel
TAS-S: Thermo Active dimension
Stabilizer – Spindle (OSP)
TAS-C: Thermo Active dimension
Stabilizer – Construction (OSP)
Spindle thermal deformation
compensation (FANUC)
Ambient thermal deformation
compensation (FANUC)
ToolCutting Capacity
(cm3/min) (in3/min)Cutting Speed(m/min) (fpm)
Feedrate(mm/min) (ipm)
Cutting Depth(mm) (in.)
Cutting Width(mm) (in.)
(Material : S45C)
21 22
Thermo-FriendlyConcept
Collision AvoidanceSystem
MachiningNavi
■ Machine Specifications
■ Spindle torque/output graphs
■ Dimensional drawing/Installation drawing
Vertical Machining Center
Photos shown in this brochure may also show optional equipment.
No. 50 6,000 min-1No. 50 4,000 min-1
MILLAC 761VNo. 40 15,000 min-1No. 50 12,000 min-1
20 to 4,0002 ranges
ø100 (3.94)
18.5/15 (25/20) (30 min/cont)
50 to 15,000
7/24 taper No. 40ø70 (2.76)
ø115/ø115 (ø4.53/ø4.53)300 (11.81)
8 (11)
1,540 (60.63)760 (29.92)660 (25.98)
200 to 860 (7.87 to 33.86)1,800 × 720 (70.87 x 28.35)
1,030 (40.55)2,000 (4,400)800 (31.50)
X-Y-Z: 16 (52)X-Y-Z: 10,000 (394)
36 [54]
3,230 (127.17)4,300 × 4,060 (169.29 x 159.84)
12,500 (27,500)OSP-P300M, FANUC 31i-B
50 to 12,000
ø90 (3.54)
Stepless (integral motor/spindle)
OSP:26/18.5 (35/25) (10 min/cont)FANUC:22/18.5 (30/25) (15 min/cont)
30 to 6,000
7/24 taper No. 50
ø120/ø200 (ø4.72/ø5.91)400 (15.75)
20 (44)
[ ] : Optional
Travels
Table
Spindle
Feedrate
Motors
ATC
Machine size
Control
X axis (table R/L)Y axis (table F/B)Z axis (spindle U/D)Table top to spindle noseWork surfaceFloor to table topMax load capacityColumn to spindle centerSpindle speedSpeed rangesTapered boreBearing diaRapid traverseCutting feedrateSpindle
Tool storageMax tool dia (w, w/o adj tool)Max tool lengthMax tool weightHeightFloor spaceWeight
mm (in.)mm (in.)mm (in.)mm (in.)mm (in.)mm (in.)kg (lb)
mm (in.)min-1
mm (in.)m/min (fpm)
mm/min (ipm)
kW (hp)
toolmm (in.)mm (in.)kg (lb)
mm (in.)mm (in.)kg (lb)
UnitItem
No. 50 4,000 min-1 spindle (OSP, FANUC)Maximum output: 18.5/15 kW (30 min/cont)Maximum torque: 587/476 N-m (30 min/cont)
No. 50 6,000 min-1 spindle (OSP, FANUC)Maximum output: 18.5/15 kW (30 min/cont)Maximum torque: 481/390 N-m (30 min/cont)
No. 50 12,000 min-1 spindle (OSP)Maximum output: 26/18.5 kW (10 min/cont)Maximum torque: 199/146 N-m (10 min/cont)
11 kW (cont)
18.5 kW (cont)
15 kW (10 min)26 kW (10 min)
100
720 2,500 4,000
12,000
50 500 1,000 5,000 10,000
100
500
10
50
10
5
1
146 N-m (cont)
199 N-m (10 min)18.5 kW (30 min)
15 kW (cont)
100
301 1,33920
899
4,000
50 500 1,000 5,000 10,000
100
500
1,000
10
100
50
10
5
1
476 N-m (cont)
587 N-m (30 min)
18.5 kW (30 min)
15 kW (cont)
100
367 1,63430
1.348
6,000
50 500 1,000 5,000 10,000
100
500
1,000
10
100
50
10
5
1
390 N-m (cont)
481 N-m (30 min)1,000 100
2,38
0 (9
3.70
) (be
d bo
ttom
leng
th)
ATC 36 tool spec
ATC 54 tool(Option)
650
(25.
59)
480
(18.
90)
770
(30.
31)
1,07
0(4
2.13
)35
(1.3
8)
70(2
.76)
400
(15.
75)
Door opening
1,710 (bed bottom width)
1,880 (door opening)Table outline with Y axis at forwardmost part
210
4,790 (188.58)
4,300 (169.29)490(19.29)
820 82035
190
525(20.67)680 (26.77)1,830 (72.05)
285475475285
60
(ATC
54 to
ols sp
ec)
890
(35.
04)
4,06
0 (1
59.8
4)3,
510
2,15
01,
150
170
8040
4,95
0 (1
94.8
8) (A
TC 5
4 to
ols
spec
)
60
550
(21.
65)
720
430
35(1
.38)
35
3,23
0 (1
27.1
7)
380Y-axis travel
660
(25.
98)
Z-ax
is tr
avel
2,380 (bed bottom length)650
4,950 (194.88) (ATC 54 tools spec)
3,510
800
720
890 (35.04) 4,060 (159.84)
Removable chip bucket(w/casters)
490(19.29)
120
(4.7
2)91
0 (3
5.83
)
200
(7.8
7)18
558
043
0
480
Status lamp
550
770X-axis travel
770X-axis travel
1,710 (bed bottom width)
1,800 (table)
1,880 (door opening)
4,300 (169.29)
4,790 (188.58)
No. 50 4,000/6,000 min-1 specs Electrical wiring inlet ø42 hole (H = 1,125 from ¦oor) (Electric cabinet bottom face)
ATC 54 tools(Option)
ATC 36 tools
(ATC 54 tools spec)
Tankremoval
Air intake Rc 3/8(H = 1,460 from ¦oor)
Spindle speed min-1Spindle speed min-1 Spindle speed min-1
Out
put
Torq
ue
N-m kW
Out
put
Torq
ue
N-m kW
Out
put
Torq
ue
N-m kW
23 24
540 (32.96)
485 (29.61)
252 (15.38)
252 (15.38)
165 (541.37)
165 (541.37)
25 (82.03)
25 (82.03)
1,200 (47.24)
770 (30.31)
210 (8.27)
210 (8.27)
5 (0.20)
7 (0.28)
40 (1.57)
30 (1.18)
90 (3.54)
90 (3.54)
30 (1.18)
40 (1.57)
OSP-P300M
FANUC 31i-B
4,000 min-1 No. 50 (2-speed gear head)
Spindle motor 18.5/15 kW
BIG-PLUS
(No. 50 4,000, 6,000 min-1 specs)
Oil controller
36 tools
With ceiling
Coil-type chip conveyor Table rear
Tank: 400 L, Pump motor: 250 W
3 �exible nozzles
LED
■ Max tool size (adjacent tools) ■ Maximum tools used (w/o adjacent tools)
No.50
ø100
(ø3.
94)
ø120
(ø4.
72)
50(1.97) 400 (15.75)
ø69.
85(ø
2.75
)
(*1)
ø100
(ø3.
94)
ø200
(ø7.
87)
ø69.
85(ø
2.75
)
50(1.97) 400 (15.75)
(*1)
1,800 (70.87)
720
(28.
35)
85 (3
.35)
45 (1
.77)
30(1.18)
T-slot detail
18H8
20(0
.79)
12(0
.47)76
5 (3
0.12
)
45 (1
.77)
720
(28.
35)
Y-axis trave380
720 (28.35)
765(30.12)
(30.31) (30.31)
(14.96) (14.96)
55 (2.17)
800 (31.50)
60(2.36)
Column slideway
Z-a
xis
trav
el 6
60(2
5.98
)
(25.
98)
Z-axis Slide Cover
[ ]: High column specs
Table
1,800 (70.87)X-axis travel 770 X-axis travel 770
Z-a
xis
trav
el 6
60
Y-axis trave380
Table
Specifications Remarks Specifications Remarks
Specifications Remarks Specifications Remarks
■ Machining Capacity ■ Maximum tool dimensions
■ Table size
■ Working range
■ Standard Specifications · Accessories
■ Optional Specifications · Options
Data listed in the catalog are actual data. These values may not be obtained depending on speci¥cations, tooling, and cutting conditions and other factors.
(*1): Interference with outer part of ATC tool change arm and tooling may occur with commercially available milling chucks, etc.Always be sure to check dimensions in tooling catalogues or other literature.
No. 50 spindle 4,000 min-1
2-range gear head
ø150 face mill8 blades
ø40 roughingend mill
No. 50 2-speed gear head
18.5/15 kW
No. 50 integral motor/spindle
26/18.5 kW (OSP)
22/18.5 kW (FANUC)
No. 40 integral motor/spindle
26/18.5 kW (OSP)
22/18.5 kW (FANUC)
54 tools
Ring type
Nozzle type
Pump motor : 550 W
0.5 MPa, 1.5 MPa
Okuma pull stud for 1.5 MPa, 1.5 MPa
large capacity, and 7 MPa required.
Oil pan part
Hinge conveyor, scraper conveyor
See recommended chip conveyor speci¥cations, P4.
BIG-PLUS®
No. 50 12,000 min-1
No. 40 15,000 min-1
Tilt with/without
100 mm
Belt type
NC, tilt, indexing
1,800 × 720 × 100 mm
+200 mm
Infrared communication type
Touch type
X-Y-Z axis
X-Y-Z axis
Forms set together with below options.
High column 200 mm
Pallet size 1,700 × 700 mm
Tap pallet, T-slot pallet
Raised machine
Workpiece washing gun
Air gun mount
Angle head preps
Manual clamp ¥xture
Hydraulic and pneumatic ¥xtures
Oil skimmer
Mist collector
Rotary table
Sub table
Reference tool
Ring gauge
High column
Auto gauging, auto zero offset
Auto tool lengh compensation/auto
tool breakage detection function
AbsoScale detection (OSP)
Scale feedback (FANUC)
Status lamp
Foundation bolt
Parallel 2-pallet APC
Spindle speed
6,000 min-1
Spindle speed
12,000 min-1
Spindle speed
15,000 min-1
ATC magazine
Chip air blower
Coolant nozzle
Semi-dry unit
Coolant level sensor
Coolant supply systems
Oil hole device
Thru-spindle coolant
In-machine chip �ushing
speci¥cations
Off-machine chip
discharge
Spindle nose constraint
Chip bucket
CNC
Spindle speed
Spindle nose constraint
Spindle cooling system
ATC magazine
ATC air blower
Full-enclosure
Slideway lubricating equipemnt
In-machine conveyor
Chip pan
Coolant supply system
Coolant nozzle
Work lamp
Spindle air curtain
Air cleaner (¥lter)
Pulse handle
Electronic buzzer
Foundation blocks / Jack bolts
Tool / Tool box
Tool release lever
TAS-S: Thermo Active dimension
Stabilizer – Spindle (OSP)
TAS-C: Thermo Active dimension
Stabilizer – Construction (OSP)
Spindle thermal deformation
compensation (FANUC)
Ambient thermal deformation
compensation (FANUC)
Including regulator
Single axis, switchable
At operation end and alarm times
Hand tools
(3.35
)(3.
35)
(4.33
)(4.
33)
(4.33
)(4.
33)(
4.33
)85
8511
011
011
011
011
0
(7.8
7)20
0
[400
](1
5.75
)
(7.8
7)20
0
[400
](1
5.75
)
ToolCutting Capacity
(cm3/min) (in3/min)Cutting Speed(m/min) (fpm)
Feedrate(mm/min) (ipm)
Cutting Depth(mm) (in.)
Cutting Width(mm) (in.)
(Material : S45C)
®
25 26
Thermo-FriendlyConcept
Collision AvoidanceSystem
MachiningNavi
■ Machine Specifications
■ Spindle torque/output graphs
■ Dimensional drawing/Installation drawing
< >: X-axis travel 3,050 specs [ ] : Optional
Vertical Machining Center
Photos shown in this brochure may also show optional equipment.
No. 50 6,000 min-1No. 50 4,000 min-1
MILLAC 852VNo. 40 15,000 min-1No. 50 12,000 min-1
20 to 4,000 50 to 15,000
7/24 taper No. 40ø70 (2.76)
ø115/ø115 (ø4.53/ø4.53)300 (11.81)
8 (11)
2,050 <3,050> (80.71 <120.08>)850 (33.46)750 (29.53)
200 to 950 <160 to 910> (7.87 to 37.40 <6.30 to 35.83>2,200 <3,200> × 850 (86.61 <125.98> × 33.46)
1,060 <1,100> (41.73 <43.31>)2,500 <3,800> (5,500 <8,360>
900 (35.43)
X-Y-Z: 16 <X-Y: 12, Z: 16> (X-Y-Z: 52 <X-Y: 39, Z: 52>)X-Y-Z: 10,000 (394)
36 [54]
5,460 × 4,445 <7,460 × 4,445> (214.96 × 175 <293.70 × 175>)15,000 <18,500> (33,000 <40,700>)
OSP-P300M, FANUC 31i-B
50 to 12,000
ø90 (3.54)
30 to 6,000
7/24 taper No. 50
ø120/ø200 (ø4.72/ø7.87)400 (15.75)
20 (44)
< >: X-axis travel 3,050 specs [ ] : Optional
2 ranges
ø100 (3.94)
18.5/15 (25/20) (30 min/cont)
3,350 (131.89)
Stepless (integral motor/spindle)
OSP:26/18.5 (35/25) (10 min/cont)FANUC:22/18.5 (30/25) (15 min/cont)
3,320 (130.71)
Travels
Table
Spindle
Feedrate
Motors
ATC
Machine size
Control
X axis (table R/L)Y axis (table F/B)Z axis (spindle U/D)Table top to spindle noseWork surfaceFloor to table topMax load capacityColumn to spindle centerSpindle speedSpeed rangesTapered boreBearing diaRapid traverseCutting feedrateSpindle
Tool storageMax tool dia (w, w/o adj tool)Max tool lengthMax tool weightHeightFloor spaceWeight
mm (in.)mm (in.)mm (in.)mm (in.)mm (in.)mm (in.)kg (lb)
mm (in.)min-1
mm (in.)m/min (fpm)
mm/min (ipm)
kW (hp)
toolmm (in.)mm (in.)kg (lb)
mm (in.)mm (in.)kg (lb)
UnitItem
No. 50 4,000 min-1 (OSP, FANUC)Maximum output: 18.5/15 kW (30 min/cont)Maximum torque: 587/476 N-m (30 min/cont)
No. 50 6,000 min-1 spindle (OSP, FANUC)Maximum output: 18.5/15 kW (30 min/cont)Maximum torque: 481/390 N-m (30 min/cont)
No. 50 12,000 min-1 spindle (OSP)Maximum output: 26/18.5 kW (10 min/cont)Maximum torque: 199/146 N-m (10 min/cont)
11 kW (cont)
18.5 kW (cont)
15 kW (10 min)26 kW (10 min)
100
720 2,500 4,000
12,000
50 500 1,000 5,000 10,000
100
500
10
50
10
5
1
146 N-m (cont)
199 N-m (10 min)18.5 kW (30 min)
15 kW (cont)
100
301 1,33920
899
4,000
50 500 1,000 5,000 10,000
100
500
1,000
10
100
50
10
5
1
476 N-m (cont)
587 N-m (30 min)
18.5 kW (30 min)
15 kW (cont)
100
367 1,63430
1.348
6,000
50 500 1,000 5,000 10,000
100
500
1,000
10
100
50
10
5
1
390 N-m (cont)
481 N-m (30 min)1,000 100
Spindle speed min-1Spindle speed min-1 Spindle speed min-1
Out
put
Torq
ue
N-m kW
Out
put
Torq
ue
N-m kW
Out
put
Torq
ue
N-m kW
Air intake Rc 3/8(H = 1,360 from §oor)
640
(25.
20)
2,83
5(1
11.6
1)42
0(1
6.54
)
45(1
.77)
1,08
0(4
2.52
)18
5(7
.28)
597.
5(2
3.52
)60
2.5
(23.
72)
255
(10.
04)
70 (2.7
6)
745(29.33)
605(23.82)
520(20.47)
1901,060 (41.73)75 (2.95) 75 (2.95)
235
705
(27.
76)
5,780 (227.56)
5,460 (214.96)
2,500
1,290
320(12.60)
1,290
8050
1,15
02,
460
3,89
573
0
4,62
5 (1
82.0
9)
550
5,33
0 (2
09.8
4) (A
TC 5
4 to
ols
spec
)
280
780
1,34
0850
2,200
850 (table)70 to 920(Y-axis travel 850)
5,150 (202.76) (ATC 54 tools spec)(ATC 54 tools spec)705 (27.76)
2,605650 640
3,895
4,445 (175)
550
200
to 9
50(Z
-axi
s tr
avel
750
)
Table top
3,35
0 (1
31.8
9)
3,23
0 (1
27.1
7)12
0 (4
.72)
900 20
940
1,025X-axis travel
1,025X-axis travel
2,500 (door opening)
5,460 (214.96)
2,650
1,290 1,4401,440 1,290
5,780 (227.56)
320(12.60)
2,200 (table)
No. 50 4,000/6,000 min-1, X-axis travel 2,050 specs
ATC 54 tool(Option)
Electrical wiring inlet ø42 hole (H = 1,140 from §oor) (Electric cabinet bottom face)
(ATC
54 to
ols sp
ec)
Door opening Table outline with Y axis at forwardmost part Removable chip bucket(w/casters)
Removable chip bucket(w/casters)
ATC 54 tools(Option)
ATC 36 tools
Status lamp
Tank removalTank removal
27 28
OSP-P300M
FANUC 31i-B
4,000 min-1 No. 50 (2-speed gear head)
Spindle motor 18.5/15 kW
BIG-PLUS®
(No. 50 4,000, 6,000 min-1 specs)
Oil controller
36 tools
With ceiling
Coil-type chip conveyor Table rear
Tank: 900 L, Pump motor: 250 W
3 �exible nozzles
( )
■ Max tool size (adjacent tools) ■ Maximum tools used (w/o adjacent tools)
No.50
(*1)
ø200
(ø7.
87)
400 (15.75)
(*1)
2,200 (86.61) [3,200 (125.98)]
850
(33.
46)
95 (
3.74
)
T-slot detail
18H8
895
(35.
24)
850
(33.
46)
9511
011
011
011
011
011
095
2,200 [3,200]
Z-a
xis
trav
el 7
50
< >: High column specs [ ] specifications are X-axis travel 3,050 mm (120.08 in.) specs
Y-axis travel 425
20 (0.78)
900 (35.43)
70
[160]
200
([6.3
0])
(7.8
7)
Z-a
xis
trav
el 7
50Column slideway
Z-axis Slide Cover
<400 [360]
(15.75
)
([14.1
7])>
[160]
200
([6.3
0])
(7.8
7)
<400 [360]
(15.75
)
([14.1
7])>
34 (1.34)
Table
Table
X-axis travel 1,025 [1,525] X-axis travel 1,025 [1,525]895
850 (33.46) Y-axis travel 425
Specifications Remarks Specifications Remarks
Specifications Remarks Specifications Remarks
■ Machining Capacity ■ Maximum tool dimensions
■ Table size
■ Working range
■ Standard Specifications · Accessories
■ Optional Specifications · Options
Data listed in the catalog are actual data. These values may not be obtained depending on speci¥cations, tooling, and cutting conditions and other factors.
(*1): Interference with outer part of ATC tool change arm and tooling may occur with commercially available milling chucks, etc.Always be sure to check dimensions in tooling catalogues or other literature.
No. 50 spindle 4,000 min-1
2-range gear head
ø150 face mill8 blades
ø40 roughingend mill
No. 50 2-speed gear head
18.5/15 kW
No. 50 integral motor/spindle
26/18.5 kW (OSP)
22/18.5 kW (FANUC)
No. 40 integral motor/spindle
26/18.5 kW (OSP)
22/18.5 kW (FANUC)
54 tools
Ring type
Pump motor : 550 W
0.5 MPa, 1.5 MPa
Okuma pull stud for 1.5 MPa, 1.5 MPa
large capacity, and 7 MPa required.
Oil pan part
Hinge conveyor, scraper conveyor
See recommended chip conveyor speci¥cations, P4.
BIG-PLUS®
No. 50 12,000 min-1
No. 40 15,000 min-1
Tilt with/without
100 mm
Belt type
NC, tilt, indexing
2,200 × 850 × 100 mm
+200 mm
Infrared communication type
Touch type
X-Y-Z axis
X-Y-Z axis
Forms set together with below options.
High column 200 mm
Pallet size 2,200 × 820 mm
Tap pallet, T-slot pallet
Raised machine
Workpiece washing gun
Air gun mount
Angle head preps
Manual clamp ¥xture
Hydraulic and pneumatic ¥xtures
Oil skimmer
Mist collector
Rotary table
Sub table
Reference tool
Ring gauge
High column
Auto gauging, auto zero offset
Auto tool lengh compensation/auto
tool breakage detection function
AbsoScale detection (OSP)
Scale feedback (FANUC)
Status lamp
Foundation bolt
Parallel 2-pallet APC
Spindle speed
6,000 min-1
Spindle speed
12,000 min-1
Spindle speed
15,000 min-1
ATC magazine
Chip air blower
Coolant nozzle
Coolant level sensor
Coolant supply systems
Oil hole device
Thru-spindle coolant
In-machine chip �ushing
speci¥cations
Off-machine chip
discharge
Spindle nose constraint
Chip bucket
CNC
Spindle speed
Spindle nose constraint
Spindle cooling system
ATC magazine
ATC air blower
Full-enclosure
Slideway lubricating equipemnt
In-machine conveyor
Chip pan
Coolant supply system
Coolant nozzle
Work lamp
Spindle air curtain
Air cleaner (¥lter)
Pulse handle
Electronic buzzer
Foundation blocks / Jack bolts
Tool / Tool box
TAS-S: Thermo Active dimension
Stabilizer – Spindle (OSP)
TAS-C: Thermo Active dimension
Stabilizer – Construction (OSP)
Spindle thermal deformation
compensation (FANUC)
Ambient thermal deformation
compensation (FANUC)
LED
Including regulator
Single axis, switchable
At operation end and alarm times
X-axis travel2,050 mm speci¥cations only
ø69.
85(ø
2.75
)
ø69.
85(ø
2.75
)
50(1.97) 50
(1.97)400 (15.75)
ø100
(ø3.
94)
ø100
(ø3.
94)
ø120
(ø4.
72)
45 (1
.77)
(4.33
)(4.
33)
(4.33
)(4.
33)
(4.33
)(3.
74)
(3.74
)(4.
33)
45 (1
.77)
(35.24)(40.35 [60.04]) (86.61 [125.98]) (40.35 [60.04])
(16.73)(16.73)(2.76)
(29.
53)
(29.
53)
30(1.18)
20(0
.79)
12(0
.47)
ToolCutting Capacity
(cm3/min) (in3/min)Cutting Speed(m/min) (fpm)
Feedrate(mm/min) (ipm)
Cutting Depth(mm) (in.)
Cutting Width(mm) (in.)
540 (32.96)
485 (29.61)
252 (15.38)
252 (15.38)
165 (541.37)
165 (541.37)
25 (82.03)
25 (82.03)
1,200 (47.24)
770 (30.31)
210 (8.27)
210 (8.27)
5 (0.20)
7 (0.28)
40 (1.57)
30 (1.18)
90 (3.54)
90 (3.54)
30 (1.18)
40 (1.57)
(Material : S45C)
29 30
Thermo-FriendlyConcept
Collision AvoidanceSystem
MachiningNavi
■ Machine Specifications
■ Spindle torque/output graphs
■ Dimensional drawing/Installation drawing
Photos shown in this brochure may also show optional equipment.
< >: X-axis travel 3,050 specs [ ] : Optional
Large Vertical Machining Center
No. 50 6,000 min-1No. 50 4,000 min-1
MILLAC 1052VNo. 40 15,000 min-1No. 50 12,000 min-1
50 to 15,000
7/24 taper No. 40ø70 (2.76)
ø115/ø115 (ø4.53/ø4.53)300 (11.81)
8 (11)
20 to 4,0002 ranges
ø100 (3.94)
22/18.5 (30/25) (30 min/cont)
2,050 <3,050> (80.71 <120.08>)1,060 (41.73)800 (31.50)
200 to 1,000 <160 to 960> (7.87 to 39.37 <6.30 to 37.80>)2,200 <3,200> × 1,050 (86.61 <125.98> × 41.34)
1,060 <1,150> (41.73 <45.28>)5,000 (11,000)1,100 (43.31)
X-Y-Z: 16 <X-Y: 12, Z: 16> (X-Y-Z: 52 <X-Y: 39, Z: 52>)X-Y-Z: 10,000 (394)
36 [54]
3,520 <3,570> (138.58 <140.55>)6,760 × 4,470 <9,065 × 4,495> (266.14 × 175.98 <356.89 × 176.67>)
24,000 <27,000> (52,800 <59,400>)OSP-P300M, FANUC 31i-B
50 to 12,000
ø90 (3.54)
Stepless (integral motor/spindle)
OSP:26/18.5 (35/25) (10 min/cont)FANUC:2/18.5 (30/25) (15 min/cont)
30 to 6,000
7/24 taper No. 50
ø120/ø200 (ø4.72/ø7.87)400 (15.75)
20 (44)
Travels
Table
Spindle
Feedrate
Motors
ATC
Machine size
Control
X axis (table R/L)Y axis (table F/B)Z axis (spindle U/D)Table top to spindle noseWork surfaceFloor to table topMax load capacityColumn to spindle centerSpindle speedSpeed rangesTapered boreBearing diaRapid traverseCutting feedrateSpindle
Tool storageMax tool dia (w, w/o adj tool)Max tool lengthMax tool weightHeightFloor spaceWeight
mm (in.)mm (in.)mm (in.)mm (in.)mm (in.)mm (in.)kg (lb)
mm (in.)min-1
mm (in.)m/min (fpm)
mm/min (ipm)
kW (hp)
toolmm (in.)mm (in.)kg (lb)
mm (in.)mm (in.)kg (lb)
UnitItem
No. 50 4,000 min-1 spindle (OSP, FANUC)Maximum output: 22/18.5 kW (30 min/cont)Maximum torque: 827/695 N-m (30 min/cont)
No. 50 6,000 min-1 spindle (OSP, FANUC)Maximum output: 22/18.5 kW (30 min/cont)Maximum torque: 511/430 N-m (30 min/cont)
22 kW (30 min)
18.5 kW (cont)
30
100
411 1,348 1,828 6,000
50 500 1,000 5,000
100
500
1,000
10
100
50
10
5
1
430 N-m (cont)
511 N-m (30 min)
No. 50 12,000 min-1 spindle (OSP)Maximum output: 26/18.5 kW (10 min/cont)Maximum torque: 199/146 N-m (10 min/cont)
11 kW (cont)
18.5 kW (cont)
15 kW (10 min)26 kW (10 min)
100
720 2,500 4,000
12,000
50 500 1,000 5,000 10,000
100
500
1,000
10
100
50
10
5
1
146 N-m (cont)
199 N-m (10 min)
695 N-m (cont)
827 N-m (30 min)
22 kW (30 min)
18.5 kW (cont)
20
100
254 899 1,129 4,000
50 500 1,000 5,000
100
500
1,000
10
100
50
10
5
1
Spindle speed min-1Spindle speed min-1 Spindle speed min-1
Out
put
Torq
ue
N-m kW
Out
put
Torq
ue
N-m kW
Out
put
Torq
ue
N-m kW
Air intake Rc 3/8(H = 530 from §oor)
2,690 (105.91)5,460 (214.96)
1,100 1,100 205 (8.07)205(8.07)
1,625 (63.98)
4,20
0 (1
65.3
5)
2,87
0 (1
12.9
9)1,
330
(52.
36)
110
2,200
190(7.48)
965(37.99)
526(20.71)
1,015(39.96)
80(3
.15)
4,20
0 (1
65.3
5)
3,29
0 (1
29.5
3)52
0(2
0.47
)27
0(1
0.63
)39
0(15
.35)
1,52
02,
290
1,05
0
690
Z-ax
is tra
vel 8
00
605
1,06
3
940
200
3,40
0 (1
33.8
6)
3,52
0 (1
38.5
8)
2,200 (86.61) (table)X-axis travel 1,025
(40.35)X-axis travel 1,025
(40.35)
Drum ¨lter-typechip conveyor
2,46
0 (9
6.85
)
5,460 (214.96)
6,760 (266.14)
1,200 (4.72)
2,440 (96.06) (door hatching)
1,10
0 (4
3.31
)
120
(4.7
2)
4,470 (175.98)
60
4,200 (165.35)
1,10015
270(10.63)
3,070 390(15.35)
740
No. 50 4,000/6,000 min-1,X-axis travel 2,050 specs
Electrical wiring inlet(H = 1,140 from §oor)
Door openingTable outline with Y axis at forwardmost part
Y-axis travel530
Y-axis travel530Table width 1,050
Status lamp
Tankremoval
31 32
720 (43.96)
756 (46.15)
360 (21.98)
165 (541.37)
165 (541.37)
25 (82.03)
1,600 (62.99)
1,200 (47.24)
300 (11.81)
5 (0.20)
7 (0.28)
30 (1.18)
90 (3.54)
90 (3.54)
40 (1.57)
■ Max tool size (adjacent tools)
No.50■ Max tool size (adjacent tools)
38(1.50)
(*1)
ø100
(ø3.
94)
ø200
(ø7.
87)
ø69.
85(ø
2.75
)
50(1.97) 400 (15.75)
38(1.50)
(*1)
2,200 (86.61) [3,200 (125.98)]
1,05
0 (4
1.34
)13
5 (5
.31)
45 (1
.77)
T-slot detail
18H8
45 (1
.77)
1,09
5 (4
3.11
)
1,05
0 (4
1.34
)
130
130
130
130
130
130
135
135
2,200 [3,200]X-axis travel 1,025 [1,525] X-axis travel 1,025 [1,525]
Z-a
xis
trav
el 8
00
Y-axis travel 530
Y-axis travel 5301,050
1,100 (43.31)
15
60
Z-a
xis
trav
el 8
00Column slideway
Z-axis Slide Cover
< >: High column specs [ ] specifications are X-axis travel 3,050 mm (120.08 in.) specs
40 (1.57)
Table
Table
Specifications Remarks Specifications Remarks
■ Machining Capacity ■ Maximum tool dimensions
■ Table size
■ Working range
■ Optional Specifications · Options
Data listed in the catalog are actual data. These values may not be obtained depending on speci�cations, tooling, and cutting conditions and other factors.
(*1): Interference with outer part of ATC tool change arm and tooling may occur with commercially available milling chucks, etc.Always be sure to check dimensions in tooling catalogues or other literature.
No. 50 spindle 4,000 min-1
2-range gear head
ø150 face mill8 blades
ø40 roughingend mill
No. 50 2-speed gear head
22/18.5 kW
No. 50 integral motor/spindle
26/18.5 kW (OSP)
22/18.5 kW (FANUC)
No. 40 integral motor/spindle
26/18.5 kW (OSP)
22/18.5 kW (FANUC)
54 tools
Ring type
Pump motor : 550 W
0.5 MPa, 1.5 MPa
Okuma pull stud for 1.5 MPa, 1.5 MPa
large capacity, and 7 MPa required.
Hinge conveyor
Oil pan part
Hinge conveyor, scraper conveyor
Scraper type (with drum �lter) conveyor
See recommended chip conveyor speci�cations, P4
BIG-PLUS®
No. 50 12,000 min-1
No. 40 15,000 min-1
Tilt with/without
NC, tilt, indexing
2,200 × 1,050 × 100 mm
+150 mm
Infrared communication type
Touch type
3-axis mobile type
X-Y-Z axis
X-Y-Z axis
Forms set together with below options.
High column 150 mm
Pallet size 2,200 × 1,020 mm
Tap pallet, T-slot pallet
Chip bucket
Workpiece washing gun
Air gun mount
Angle head preps
Manual clamp �xture
Hydraulic and pneumatic �xtures
Oil skimmer
Mist collector
Rotary table
Sub table
Reference tool
Ring gauge
High column
Auto gauging, auto zero offset
Auto tool lengh compensation/auto
tool breakage detection function
Pulse handle
AbsoScale detection (OSP)
Scale feedback (FANUC)
Status lamp
Foundation bolt
Parallel 2-pallet APC
Spindle speed
6,000 min-1
Spindle speed
12,000 min-1
Spindle speed
15,000 min-1
ATC magazine
Chip air blower
Coolant nozzle
Coolant level sensor
Coolant supply systems
Oil hole device
Thru-spindle coolant
In-machine chip discharge
In-machine chip ¨ushing
speci�cations
Off-machine chip
discharge
Spindle nose constraint
OSP-P300M
FANUC 31i-B
4,000 min-1 No. 50 (2-speed gear head)
Spindle motor 22/18.5 kW
BIG-PLUS®
(No. 50 4,000, 6,000 min-1 specs)
Oil controller
36 tools
With ceiling
Coil-type chip conveyor Table rear
Tank: 750 L, Pump motor: 250 W
3 ¨exible nozzles
Specifications Remarks Specifications Remarks
■ Standard Specifications · Accessories
CNC
Spindle speed
Spindle nose constraint
Spindle cooling system
ATC magazine
ATC air blower
Full-enclosure
Slideway lubricating equipemnt
In-machine conveyor
Chip pan
Coolant supply system
Coolant nozzle
Work lamp
Spindle air curtain
Air cleaner (�lter)
Pulse handle
Electronic buzzer
Foundation blocks / Jack bolts
Tool / Tool box
TAS-S: Thermo Active dimension
Stabilizer – Spindle (OSP)
TAS-C: Thermo Active dimension
Stabilizer – Construction (OSP)
Spindle thermal deformation
compensation (FANUC)
Ambient thermal deformation
compensation (FANUC)
LED
Including regulator
Single axis, switchable
At operation end and alarm times
( )X-axis travel2,050 mm speci�cations only
ø69.
85(ø
2.75
)
ø100
(ø3.
94)
50(1.97)
400 (15.75)
ø120
(ø4.
72)
(5.31
)(5.
31)
(5.12
)(5.
12)
(5.12
)(5.
12)
(5.12
)(5.
12) 30
(1.18)
20(0
.79)
12(0
.47)
(20.87) (20.87)(41.34)(2.36)
(0.59) [160]
200
([6.3
0])
(7.8
7) <350 [310]
(13.78
)
([12.2
0])>
(31.
50)
[160]
200
([6.3
0])
(7.8
7) <350 [310]
(13.78
)
([12.2
0])>
(31.
50)
(40.35 [60.04]) (40.35 [60.04])(86.61 [125.98])
ToolCutting Capacity
(cm3/min) (in3/min)Cutting Speed(m/min) (fpm)
Feedrate(mm/min) (ipm)
Cutting Depth(mm) (in.)
Cutting Width(mm) (in.)
(Material : S45C)
33 34
FANUC 31i-BOkuma Control OSP-P300MBasic Specs
Programming
Operations
High speed/accuracy specs
Control
Input increment
Workpiece coordinates
Feed
Spindle control
Tool compensation
Display
Program capacity
Programming
operations
Machine
operations
Basic specs
Programming
Operations
Communications / Networking
High speed/accuracy specs
Control
Position feedback
Coordinate functions
Min/max inputs
Feed
Spindle control
Tool compensation
Display
Self-diagnostics
Program capacity
Program operations
Easy Operation
Machine operations
MacMan
■Standard Specifications
ItemsKit specs 3D AOT AOT
ItemsKit specsNML
Interactive capacities
Programming
E D E D E D DGauging
3D
E D E D E
NML
Program memory capacity 512 KB (1,280 m)No. of tool compensations: 99 setsHelical interpolationSimultaneous editing of multiple programs (background)Custom macrosOperating time/part No. displayTool life managementRigid tappingJapanese language display
99 sets200 sets400 sets499 sets999 sets
C
Power ONSpindle run-timeNC ON timeMachining
X-Y-Z axisMILLAC 468V Ⅱ, MILLAC 561V Ⅱ
MILLAC 468V Ⅱ, MILLAC 561V Ⅱ
OperationsProgram restartFast skipManual handle interruptTool compensations
MonitoringPower shutoffHour meters
High-speed / High accuracyScale feedbackSpindle Thermal GrowthCompensationConstruction Thermal GrowthCompensationOtherLamp in control boxCircuit breakerProgram protection key switchJapanese language display
Tool maximum rotational speed settingTool offsetTool compensation memoryCF card adaptorWarming up function
Soft-K kitAI contour control ⅡData server (1 GB)Nano smoothingSoft-K kit (see table at left)
AI Contouring Control kit
■Optional Specifications
128 KB (320 m)256 KB (640 m)512 KB (1,280 m)1 MB (2,560 m)2 MB (5,120 m)4 MB (10,240 m)8 MB (20,480 m)125 (64 KB)250 (128 KB)500 (256 KB)1,000(512 KB, 1 MB, 2 MB, 4 MB, 8MB)2,000 (1 MB)4,000 (2 MB, 4 MB, 8 MB)
Total 600
AI contour control Ⅱ kit1 GB4 GB
48 sets300 sets
Programming
Program memory capacities
Registered programs
Helical interpolationSimultaneous editing of multiple programs (background)Custom macrosCustom macros (additional common variables)Display of machine utilization time / No. of partsTool life managementRigid tappingNo. of read-ahead blocks extension 600 1000Data server capacity
External M codeF1-digit feed (9 digits)Arbitrary angle chamfering corner RProgrammable mirror imageWorkpiece coordinate system setsAutomatic corner overrideScalingFS15 tape formatNanosmoothingCylindrical interpolationPolar coordinate interpolation
■Standard Specifications
■Optional Specifications
X, Y, Z simultaneous 3-axis, spindle control (1 axis)
OSP full range absolute position feedback (zero point return not required)
Machine coordinate system (1 set), work coordinate system (20 sets)
Decimal 8 digits,±99999.999mm to 0.001mm (±3937.0078 to 0.0001 in), 0.001°
Decimals as: 1 µm, 10 µm, 1 mm (0.0001, 1in) (1°, 0.01°, 0.001°) can be set
Override 0 to 200%, rapid traverse override 0 to 100%
Direct spindle speed command (S5), override 30 to 300%, multi-point indexing
No. of registered tools: Max 999 sets, tool length/radius compensation: 3 sets per tool
15-inch color LCD + touch panel operations
Automatic diagnostics and display of program, operation, machine, and NC system faults
Program storage capacity: 4 GB; operation backup capacity: 2 MB
Program management, editing, multitasking, scheduled program, fixed cycle, G-/M-code macros, arithmetic, logic statements,
math functions, variables, branch commands, coordinate calculate, area calculate, coordinate convert, programming help
“Single-mode operation” to complete a series of operations
Comprehensive management of tool shape and tool compensation information for each tool number
Tool data shared between machining, Advanced One-Touch IGF (optional), and Collision Avoidance System (optional)
Advanced operation panel/graphics facilitate smooth machine control
MDI, manual (rapid traverse, manual cutting feed, pulse handle), load meter, operation help, alarm help, sequence return, manual
interrupt/auto return, pulse handle overlap, parameter I/O, PLC monitor
Machining management: machining results, machine utilization, fault data compile & report, external output
USB (2 ports), Ethernet, RS-232-C interface (1 channel)
Hi-cut Pro, pitch error compensaion
TAS-S (Thermo Active Stabilizer––Spindle): MILLAC 611V Ⅱ, MILLAC 761V Ⅱ, MILLAC 852V Ⅱ, MILLAC 1052V ⅡTAS-C (Thermo Active Stabilizer––Construction): MILLAC 611V Ⅱ, MILLAC 761V Ⅱ, MILLAC 852V Ⅱ, MILLAC 1052V Ⅱ
Advanced One-Touch IGF-M (Real 3-D simulation included)Interactive MAP ( −MAP) −MAP−B −MAP−C
Auto gauging
Tool breakagedetectionGauging data printoutManual gauging (w/o sensor)Interactive gauging (Touch sensor, touch probe required)
External I/O, communicationsAdditional RS-232-C channels (1 channel is standard spec)DNC-B (RS-232-C to Ethernet (OSP) converter)DNC-DTAdditional USB (additional 2 ports; standard 2 ports)
Automation, Untended operationsAuto power shut-off
Warm-up (calendar timer) External programselectionCycle time reduction (Reduced cycle time)
MonitoringReal 3-D simulationSimple load monitorNC operation monitorHour meters
Work counterMOP-TOOL Tool life management
Auto scheduled program updateCommon variables(Std: 200)Program branch; 2 setsProgram notes (MSG)Coordinate systemselection (Std: 20)
Helical cutting (within 360 degrees)3-D circular interpolationSynchronized TappingⅡArbitrary angle chamferingCylindrical side facingSlope machiningTool maximum rotational speed settingF1-digit feed Programmable travel limits (G22, G23)Skip (G31)G/M code macro additional3-D tool compensationTool wear compensationDrawing conversion
User Task 2Fixture offsetInverse time feed
1,000 sets2,000 sets
Programmable mirror image (G62)Drawing enlarge / reduce (G50, G51)16 input/output variables
Spindle overload monitorHour meter, work counterPower ON, Spindle run-time,NC ON time, MachiningWith M02 and M30Adaptive control, overload monitoringCutting time and number of tools
100 sets200 sets400 sets
4 sets, 8 sets, parameter
By touch probe (w/G31)Including auto gauging
With M02 and END alarmsWorkpiece preps done OFF
X-, Y-, Z-axis
Sequence stopMid-block return
4, 8 signals
A, B, C axes [preps/install specs]
MILLAC 468V Ⅱ, MILLAC 561V ⅡMILLAC 468V Ⅱ, MILLAC 561V Ⅱ
High-speed, High-precisionAbsoScale detectionSuper-NURBSTAS-S (spindle)TAS-C (construction)
OtherControl cabinet lamp (inside) Circuit breakerSequence operationUpgraded sequencerestartAdditional pulse handleManual angle/arcJog feedExternal M signalsCollision Avoidance SystemMachining Navi M-g, M-i (cutting condition search) *1
One-Touch SpreadsheetBlock skip; 3 setsAdditional axesOSP-VPS (Virus protection system)
Push button, rotary switchBCD (2-digit, 4-digit)
File output
By touch sensor (w/G31)With tool compensation
Note: NML: normal 3D: 3D simulation E: Economy D: DeluxeAOT: Advanced One-Touch IGF-M*1. Machining Navi M-i is available with integral motor/spindles
Simultaneous X, Y, Z control, positioning, linear/circular interpolation
±999999.999 mm to 0.001 mm (±3937.0078 to 0.0001 in.), 0.001°
G54 to G59 6 sets
Direct F4 digit command, feed rate override 0 to 254%
Direct S5 command, spindle override 50 to 150%
T8 digit command, tool compensation: 64 sets
10.4-inch LCD, English language display, graphic display
Program capacity 64 KB (160 m)
63 registered programs, programmable data input
Fixed cycle, tool length measurement
Extended program editing, coordinate rotation, manual interaction
Optional block skip (1)
Pulse handle, input/output interface
Self-diagnostics, alarm buzzer
Tool compensation memory A
AI contour control I, bell-shaped acceleration/deceleration
Spindle Thermal Growth Compensation: MILLAC 611V Ⅱ, MILLAC 761V Ⅱ, MILLAC 852V Ⅱ, MILLAC 1052V ⅡConstruction Thermal Growth Compensation: MILLAC 611V Ⅱ, MILLAC 761V Ⅱ, MILLAC 852V Ⅱ, MILLAC 1052V Ⅱ
Vertical Machining C
entersW
hen using Okum
a prod
ucts, always read
the safety precautions
mentioned
in the instruction manual and
attached to the p
roduct.
� The sp
eci�cations, illustrations, and d
escriptions in this b
rochure vary in different m
arkets and
are subject to change w
ithout notice.P
ub.N
o.MILLA
C V
series-E-(2a)-500 (M
ay 2014)
This product is subject to the Japanese government Foreign Exchange and Foreign Trade Control Act with regard to security controlled items; whereby Okuma Corporation should be noti�ed prior to its shipment to another country.
, OGUCHI-CHO, NIWA-GUN, AICHI 480-0193, JAPAN • TEL (0587) 95-7825 • FAX (0587) 95-6074
To protect your factory and equipment from �re and assure continued safe operation, observe the following �re safety precautions whenever you operate machinery. Whenever possible, avoid the use of oil-based coolants for cutting operations. Sparks caused by hot chips, tool friction, and grinding can cause �res. Always observe the following safety measures to ensure safe operation when machining �ammable materials or when performing dry machining.
Before machining any material designated by law as a �ammable substance, e.g., plastic, rubber, wood, acquaint yourself with the special characteristics of the material in terms of �re prevention, and observe the precautions given in (2) above to ensure safe operation. Example: When machining magnesium, there is a danger that magnesium chips and water-soluble coolants will react to produce hydrogen gas, resulting in an explosive �re if any chip should ignite.
Dry machining is a �re hazard because workpieces, tools, and chips are not cooled. To ensure safe operation, do not place any �ammable objects near the machine and do not allow chips to over accumulate. In addition, be sure to check cutting tools to make sure of their service life and the condition of the tool edge, and observe the precautions regarding oil-based coolants given in (2) above.
(1) Use non�ammable cutting �uid coolant. (2) When the use of an oil-based coolant is unavoidable:
Before you begin machining, check cutting tools to make sure of their service life and the condition of the tool edge, and choose cutting conditions that will not cause a �re. Periodically clean the coolant �lter to maintain suf�cient coolant discharge, and frequently verify that coolant is discharging normally. Take measures to control the outbreak of �re: Place a �re extinguisher near the machine, have an operator constantly monitor operation, and install an automatic �re extinguishing system. Do not place �ammable materials near the machine.Do not allow chips to over accumulate. Periodically clean the inside of the machine and the area surrounding it.Check that the machine is operating normally. Never run the machine unattended. Since an automatic �re extinguishing system and other peripherals are needed for grinding operations, please let us know as soon as possible if you plan to perform such operations.
Fire Safety Precautions
1. Oil-based coolant
2. Precautions regarding machining of potentially �ammable materials
3. Dry machining
•
•
•
•
•
•
•
•
•