Vertical Formworks - Pilosio...Vertical Formworks 255 Company | Projects | ProductsP300 It is a...
Transcript of Vertical Formworks - Pilosio...Vertical Formworks 255 Company | Projects | ProductsP300 It is a...
-
Vert
ical
For
mw
orks
255
Company | Projects | Products
P300
It is a universal modular formwork system suitable for any type of site where vertical structures cast on site must be built. P300 panels are the best compromise between productivity and overhead cost savings. They are simple and sturdy and thanks to their modularity they are suitable both for small medium-size sites and for large ones to build walls, bearing walls, pillars, single sided walls, plinths, and concrete pier caps.
APPLICATIONS
P300 formworks belong to Class 7 according to prEN 15113-1 standards. Their maximum resistance to pressure is 60 kN/m2.
-
Vert
ical
For
mw
orks
257
Company | Projects | Products
MODULARITY
VERSATILITY
HIGH PRODUCTIVITY
SPECIAL COMPONENTS
P300
STRENGTHS
proper centering
degrees
panel sealing, support brackets, contrast beams)
of the siteP300 panels for quick and safe handling and storage of
material
special applications: special formworks can be designed and manufactured by Pilosio in metal structural or, in combination with standard P300formworks.
Alexandria of Egypt.
-
258
Formworks_P300
-
Vert
ical
For
mw
orks
259
Company | Projects | Products
Step footing
The P300 connection block allows connecting staggered panels for casting
over sloped surfaces with steps.
CHARACTERISTICS
Base panel sized 100x300 cm equipped with a few simple accessories, such as a quick connection block that allows quick handling and reinforcement. The frame is painted and the counter-casting surface consists of a Finnish plywood panel, 18 mm thick, that ensures high application volume. It is available in the following sizes:
AVAILABLE SIZES
H 300 cm H 150 cm H 100 cm adjustable panel for pillars
100x300 100x150 100x100 100x300
200x300 100x150
90x300 90x150 90x100 100x100
80x300 80x150 80x100
70x300 70x150 70x100
60x300 60x150 60x100
50x300 50x150 50x100
40x300 40x150 40x100
30x300 30x150 30x100
20x300 20x150 20x100
Panels can be used both vertically and horizontally.
-
260
CONNECTION SYSTEM
The P300 connection clamp ensures quick assembly and perfect alignment of formworksSpacing: 1 clamp every 1.5 m2.Advantages:
Formwork installation.
Formworks_P300
-
261
Company | Projects | Products
Panel installed horizontally.
Tie rod size 50.
P300 panels can be reinforced when inclined, both vertically and horizontally up to a
maximum inclination of 7° respect to the vertical line. Horizontal panels with plywood
alternated between panels are used for greater inclinations.
Angular panels to createcorner nodes and “T” shaped nodes.
-
262
ACCESSORIES
Panels for casting of pillars adjustable from 20 cm to 85 cm at intervals of 5 cm.
X Y
200 260
250 310
300 360
350 410
400 460
450 510
500 560
550 610
600 660
650 710
700 760
750 810
800 860
850 910
Formworks_P300
-
Vert
ical
For
mw
orks
263
Company | Projects | Products
A lift well with dismantling conical angle bars. A single crane lift is needed to dismantle the complete internal formwork.
To complete the product range, a series of service accessories, such as undersized panels, tie rods, plywood panels, angular hinges, service brackets, panel sealing, support brackets, contrast beams, etc., are available to resolve in full safety any problem at the site.
-
CHARACTERISTICS OF MATERIALS
To ensure high standards of quality and durability, the frame is manufactured in high strength steel, after a process of degreasing and cleaning is painted by immersion and dried in the oven at 130 degrees. The result is a frame highly resistant to abrasion and oxidation. The multi-layer panel is 18 mm thick with phenolic surface film protection (220 g/m2). It consists of 11 layers of birch and has no moisture absorption when panel is protected. The edges are protected with paint and it can be used about 100 times per side. The weight is 11.35 kg/m2.
The P300 formwork system has been designed and manufactured in factories of Pilosio according to prEN15113-1/206 “Vertical formwork - Part 1 performance requirements, general design and assessment.”
Formworks_P300
-
Vert
ical
For
mw
orks
265
Company | Projects | Products
CHARACTERISTICS OF THE BASE PANEL 100X300
Reinforced surface m2 3
Connecting accessories 2 connection clamps
Threaded tie rods 3
Incidence of tie rods per m2 1
Multi-layered characteristics 18 mm 13 ply-birch – 220 gr. film/m2
Use per multi-layered side 100
Formwork capacity 60 kN/m2 (80 kN/m2 pillars)
Element weight 110 kg
Incidence kg/m2 36,66
Manual handling NO
Special panel for pillars YES
CONSUMABLE MATERIALS
PVC caps 3
PVC spacers 3
PVC conic spacers 6
Disarming YES
Calgari, Canada.
-
SPECIAL APPLICATIONS
For special site requirements, the technical department of Pilosio designs and manufactures in carpentry all the necessary components for casting of non-standard structures. For the casting of circular tanks the P300 panels are assembled with special plywood that allows following the curvature of the structure.
The P300 formwork combined with special parts created for that purpose, is suitableto reinforce structures of large dimensions such as shoulders for
viaducts and circular tanks.
pin & wedge
Formworks_P300
-
Vert
ical
For
mw
orks
267
Company | Projects | Products
SPECIAL APPLICATION WITH P300 PANELSStairwells with semi-circular partition manufactured with special curved formworks, combined with standard P300 formworks.
-
Accessories and spare parts on page 324268
TECHNICAL CHARACTERISTICS
ART. DIM. MM KG ART. DIM. MM KG ART. DIM. MM KG
PANEL100X300
551100 1000x3000 110.0
PANEL200X300
551200 2000x3000 298.0
PANELH= 300
551090 900x3000 98.0551080 800x3000 90.0551070 700x3000 83.0551060 600x3000 76.0551050 500x3000 68.0551040 400x3000 61.0551030 300x3000 53.0551020 200x3000 44.0
Formworks_P300
-
Vert
ical
For
mw
orks
269
TECHNICAL CHARACTERISTICS
ART. DIM. MM KG ART. DIM. MM KG ART. DIM. MM KG
Company | Projects | Products
PANELH= 150
550100 1000x1500 62.5550090 900x1500 54.4550080 800x1500 50.0550070 700x1500 45.8550060 600x1500 41.4550050 500x1500 37.3550040 400x1500 33.0550030 300x1500 28.7550020 200x1500 23.4
PANELH= 100
55A100 1000x1000 45.055A090 900x1000 38.055A080 800x1000 35.055A070 700x1000 32.055A060 600x1000 29.055A050 500x1000 26.055A040 400x1000 23.055A030 300x1000 20.055A020 200x1000 17.0
COLUMNPANEL
551105F 1000x3000 140.0
-
Accessories and spare parts on page 324270
TECHNICAL CHARACTERISTICS
ART. DIM. MM KG ART. DIM. MM KG ART. DIM. MM KG
COLUMNPANEL
550105F 1000x1500 70.5
COLUMNPANEL
55A105F 1000x1000 52.5
INNER CORNER(25+20)
553045 3000 78.3553145 1500 39.755B045 1000 28.0
INNER CORNER(10+10) COMPLETE
553010 3000 33.8N° 8 screw M18x80 UNI 5737 ZnN° 8 washer 20x54 UNI 6593 Zn553110 1500 17.1N° 4 screw M18x80 UNI 5737 ZnN° 4 washer 20x54 UNI 6593 Zn55B110 1000 11.9N° 4 screw M18x80 UNI 5737 ZnN° 4 washer 20x54 UNI 6593 Zn
Formworks_P300
-
Vert
ical
For
mw
orks
271
TECHNICAL CHARACTERISTICS
ART. DIM. MM KG ART. DIM. MM KG ART. DIM. MM KG
Company | Projects | Products
OUTER CORNER(0+0) COMPLETE
553000 3000 37.1N° 8 screw M18x100 UNI 5739 ZnN° 8 nut M18 UNI 5588 ZnN° 8 washer 20x54 UNI 6593 Zn553100 1500 18.6N° 4 screw M18x100 UNI 5739 ZnN° 4 nut M18 UNI 5588 ZnN° 4 washer 20x54 UNI 6593 Zn55B100 1000 13.4N° 4 screw M18x100 UNI 5739 ZnN° 4 nut M18 UNI 5588 ZnN° 4 washer 20x54 UNI 6593 Zn
OUTER CORNER(10+5)
553015 3000 52.0553115 1500 24.855B015 1000 16.9
INNER CORNERWITH HINGE (22+22)
553180 3000 91.0553178 1500 46.055B180 1000 31.5
-
Accessories and spare parts on page 324274
TECHNICAL CHARACTERISTICS
ART. DIM. MM KG ART. DIM. MM KG ART. DIM. MM KG
OUTER CORNERWITH HINGE (27+27)
553260 3000 106.0553258 1500 53.855B260 1000 36.9
STRIPPING CORNER(30+30) COMPLETE
553300 3000 155.0N° 8 screw M18x100 UNI 5737 ZnN° 8 nut M18 UNI 5588 ZnN° 8 washer 20x54 UNI 6593 ZnN° 8 plate 100x80x10 Zn
STRIPPING CORNEFOR PLINTH
553290 1500 34.3
Formworks_P300
-
Vert
ical
For
mw
orks
275
TECHNICAL CHARACTERISTICS
ART. DIM. MM KG ART. DIM. MM KG ART. DIM. MM KG
Company | Projects | Products
INFILLBAR
554005 50x3000 14.7554105 50x1500 7.755C005 50x1000 5.4554010 100x3000 9.7554110 100x1500 10.455C010 100x1000 7.3
STRIPPINGINFILL BAR
554015 3000 41.0
INFILLPANEL
554040 3000 42.7554140 1500 21.655C040 1000 14.6
-
Accessories and spare parts on page 324276
TECHNICAL CHARACTERISTICS
ART. DIM. MM KG ART. DIM. MM KG ART. DIM. MM KG
WEDGE ALIGNERCOMPLETE
K556030 - 4.9N°2 P300 pin
P300SCREW ALIGNING CONNECTOR
556020 - 4.3
P300ALIGNING CONNECTOR
556000 - 5.4
REINFORCING“U” CHANNEL
554042 400 3.5
REINFORCEMENT CROSSBAROF 80
556080 800 8.8
REINFORCEMENT CROSSBAROF 160
556160 1600 35.2
P300PIN
581010 ø 19x148 0.33
P300WEDGE
581100 - 0.15
SAFETY SPLINT PINOF 3
15COP3 ø 3 0.008
Formworks_P300
-
Accessories and spare parts on page 324278
TECHNICAL CHARACTERISTICS
ART. DIM. MM KG ART. DIM. MM KG ART. DIM. MM KG
SCREW ALIGNERFOR INNER CORNER COMPLETE
K556050 - 6.6N° 1 S19 wing nutN° 2 P300 pin
SCREW ALIGNERFOR OUTER CORNER COMPLETE
K556060 - 7.0N° 1 S19 wing nutN° 2 P300 pin
HORIZONTAL ALIGNEMENT CLAMPCOMPLETE
556070 - 7.1N° 1 S19 wing nut
S19TIE-ROD DYWIDAG
583025 ø 17x250 0.37583050 ø 17x500 0.73583075 ø 17x750 1.05583100 ø 17x1000 1.42583150 ø 17x1500 2.20583200 ø 17x2000 2.90
S19 ADJUSTABLEWING NUT
583905 100x140 1.2
S19WING NUT
583900 ø 130 1.2
S19NUT WITH WINGS
583907 57x85 0.34
S19 NUTAND WASHER 20X54 UNI 6593 ZN
583910 - 0.1115R18GZ - 0.02
PLATEFOR TIE-ROD
582930 100x80x10 0.6
BREAKING LOAD 190 kN
Formworks_P300
-
Vert
ical
For
mw
orks
279
TECHNICAL CHARACTERISTICS
ART. DIM. MM KG ART. DIM. MM KG ART. DIM. MM KG
Company | Projects | Products
MOBILETIE-ROD
557020 - 3.0
P300 TIEFOR OUTER CORNERS
555040 - 2.1
P300COLUMN TIE-ROD
555050 - 0.8
SPACER Ø22 MMOF 200
584201 ø int. 22 0.3
S19WATER STOP CONNECTOR
583940 111 0.7
PLASTIC PLUGØ 24
584024 ø 24 0.001
PLASTIC CONEØ 22
584101 ø 22 0.002