Version 1 - ractronicos.pt · Please make sure the insulation of the wires is not damaged. Repair...
17
Version 1.2
Transcript of Version 1 - ractronicos.pt · Please make sure the insulation of the wires is not damaged. Repair...
Please make sure the insulation of the wires is not damaged. Repair with
supplied heatshrink tubing
Not OK OK
plugs are located on each side of the pump.
The plugs can be loosened with a hex
key
During assembly It is necessary to fill the pump
with fuel, if air is trapped the engine won’t start. Fuel can be
fed through the plug.