VERS 19-20 - GLG · 2019-09-20 · Litelux Colour Select LED Downlight Remote Driver Low profile...

MOVERSFAST

LIGHTING FOR THE TRADE

www.glg.lighting

FY19-20

32

STARBURST CRYSTAL ECO LED GEN 2

BWP ECO LED EMERGENCY WEATHERPROOF BATTEN

ECO LED PANEL GEN 2 PIERLUX ECO LED HIGHBAY GEN 5

MOTION SENSOR

ECO LED COLOUR SELECT BATTEN

CARLTON COLOUR SELECT LED BUNKER

LEDSMART+™ DIMMERS, SWITCHES AND TIMERS

LEDSMART+™ OCCUPANCY SENSOR

BWP ECO LED WEATHERPROOF BATTEN

SIRROCO II LED BULKHEAD JULUX LED 2 BULKHEAD

All products in this catalogue can be operated on 240V/ 50Hz

ORION ECO COLOUR SELECT LED OYSTER

SLIMLINE COLOUR SELECT LED OYSTER

LITELUX COLOUR SELECT LED DOWNLIGHT GEN 2

ECO LED EMERGENCY BATTEN

LITELUX COLOUR SELECT LED DOWNLIGHT REMOTE DRIVER

BLUETOOTH DOWNLIGHT PIERLUX PLUS COLOUR SELECT LED DOWNLIGHT

4

9

14 3016 17 18

LEDSMART+™ DIGITAL LEVEL DISPLAY

SMART SCAN TWO CHANNEL SENSOR

SMART SCAN SENSOR MKII - CEILING MOUNTED MOTION SENSOR

LEDSMART™ ADAPTIVE PHASE DIMMER

SITARA™ BLUETOOTH DIMMER

SITARA™ BLUETOOTH REMOTE GATEWAY

SITARA™ BLUETOOTH WALL SWITCH

35 36 37

15 31 32 33

34

29

10 11 12 13

FIREFLY2 LED EMERGENCY LIGHT

GUARDIAN 2 LED EMERGENCY FLOOD LIGHT

DIRECTOR 2 LED EXIT LIGHT

STINGRAY 2 LED EXIT LIGHT

25 26

27 28

5 6 8 24

Downlights

Panels Highbays

SHADOWECO LED FLOODLIGHT

SHADOW LED FLOODLIGHT MAXI MASTER GEN II LED FLOODLIGHT

HORNET LED FLOODLIGHT

2019 21 22

Floodlights

Emergency & Exit Lights

Battens Bunkers & Bulkheads Dimmers & Sensors

Oysters

7 23

CONTENTS

Dow

nlig

hts D

ownlights

54

The new generation Litelux Colour Select Downlight offers freedom of choice for the installer.

• One-box solution with 3-in-1 colour temperature

• Superior thermal performance, leading to a longer life

• IC-4 compliant which permits use when covered with thermal insulation in ceiling cavity

Applications

Commercial, residential, hospitality

Starburst Crystal Eco LED Gen 2Pierlite multi-function fixed or gimble downlight, a low maintenance solution for general accent lighting.

• One box solution with 2-in-1-cut-out sizes and fixed or gimble formats

• Cut-out 90mm, adjustable to 70mm by removing posts on trim

• Easy to install with flexible clips and pre-wired with 1.2m flex and plug

Applications


CODE SYSTEM WATTAGE

EXIT LUMEN LUMEN/WATT CCT CRI DIMMING ENERGY SCHEME

CRYSECO1G2 11.5W 780 70lm/W 3000K >80 Phase IPART VEU REES

CRYSECO5G2 11.5W 880 80lm/W 4000K >80 Phase IPART VEU REES

CRYSECO1G2CRYSECO5G2

DLP63/4/65RWG2

Flush

Recessed

DLP63/4/65FWG2

3 YearWarranty

30,000hrLifetime (L70B50)

90mmCut-Out

90mmCut-Out

PhaseDimmable

PhaseDimmable

IC-4Rating

IP20Ingress

Protection Rating

Ta40Operational

Temperature Rating

Litelux Colour Select LED Downlight Gen 2

CODE SYSTEM WATTAGE


DLP63/4/65FWG2 7W 750 100lm/W 3000K/ 4000K/ 6500K

>80 Phase IPART VEU REES

DLP63/4/65RWG2 6.5W 730 110lm/W 3000K/ 4000K/ 6500K

>80 Phase -

3 YearWarranty

30,000hrLifetime (L70B50) Recessed


Flush

Ta40Operational

Temperature Rating

IP44Ingress

Protection Rating

ACCESSORY CODE DESCRIPTION

DLPTRMFS* Clip-on silver trim

DLPTRMFB* Clip-on black trim

DLPTRMFBC* Clip-on brushed chrome trim

DLPTRMRS Clip-on silver trim

DLPTRMRB Clip-on black trim

DLPTRMRBC Clip-on chrome trim

*Suitable for flush product variation only.

COMPATIBLE W

ITH

MEDM LEDSMART+

COMPATIBLE W

ITH

MEDM LEDSMART+

Dow

nlig

hts D

ownlights

76

CODE SYSTEM WATTAGE

EXIT LUMEN LUMEN/WATT CCT CRI DIMMING

DLP5BT/W 9W 800 80lm/W 2700K - 6500K >80 Phase

Litelux Colour Select LED Downlight Remote DriverLow profile Litelux Colour Select LED downlight with remote dimmable driver features excellent thermal performance and allows for easy single handed installation.


• Complete with 0.9m flex and plug

• IC-4 compliant which permits use when covered with thermal insulation in ceiling cavity

Applications


CODE SYSTEM WATTAGE


DLP53/4/6FW 9W 830 90lm/W 3000K/ 4000K/ 6500K


3 YearWarranty


90mmCut-Out

IP65Ingress

Protection Rating

Ta40Operational

Temperature Rating

Bluetooth Downlight

A high quality flush mounted, diffused, LED downlight with aluminium body. When connected to bluetooth, this downlight can be controlled from a smart phone or tablet.

• Bluetooth enabled driver

• Colour tuneable between 2700K and 6500K from smart phone or tablet

• Compatible with Diginet Sitara lighting control system

Applications



Ta40Operational

Temperature Rating

IP65Ingress

Protection Rating

PhaseDimmable

DLP53/4/6FW

PhaseDimmable

90mmCut-Out

IC-4Rating

IC-4Rating

3 YearWarranty

*Phone not included

COMPATIBLE W

ITH

MEDM LEDSMART+

COMPATIBLE W

ITH

MEDM LEDSMART+

DLP5BT/W

Dow

nlig

hts

8 9

Pierlux Plus Colour Select LED DownlightPierlux Plus Colour Select LED is a high performance, stylish, simple and efficient downlight. Providing more flexibility and suits most applications.


• Recessed diffused front lens

• Easy to install with wide blade solid springs and 1.2m flex and plug

Applications

Commercial, residential, retail

CODE SYSTEM WATTAGE


PLUX43/4/6K 14W 1,200 105lm/W 3000K/ 4000K/ 6500K


PLUX63/4/6KP 25W 2,600 105lm/W 3000K/ 4000K/ 6500K


PLUX83/4/6K 35W 3,700 105lm/W 3000K/ 4000K/ 6500K


3 YearWarranty


IP44Ingress

Protection Rating

Ta40Operational

Temperature Rating

PLUX43/4/6K PLUX63/4/6KP PLUX83/4/6K

Panels

Eco LED Panel Gen 2Pierlite Eco Colour Select LED Panel Gen 2 is a low profile luminaire solution, designed as an ideal replacement for traditional fluorescent recessed troffers.

• One-box solution with 3-in-1 colour temperature*

• Office compliant option available in UGR19

• Easy to install with remote constant driver and 1.2m flex and plug

Applications

Commercial, general lighting

CODE SYSTEM WATTAGE

EXIT LUMEN LUMEN/WATT

CCT CRI DIMENSIONS(H X W X L)

ECOPL063CSEG2 14W 1,400 107lm/W 4000K/ 5000K/ 6500K >80 30mm x 295mm x 595mm




ECOPL1234UG19 34W 3,200 94lm/W 4000K >80 30mm x 295mm x 1195mm

ECOPL1234EG2 27W 2,900 107lm/W 4000K >80 30mm x 295mm x 1195mm

3 YearWarranty

IK07Impact Rating


Ta40Operational

Temperature Rating

IP40Ingress

Protection Rating

Non-Dimmable


UDFRM/6-3 Universal deep frame 295 x 595


UDFRM/12-3 Universal deep frame 295 X 1195


FRM/PM18W Plaster master frame 295 x 595

FRM/PM18WIDE Plaster master frame 595 x 595

FRM/PM36W Plaster master frame 295 x 1195

FRM/PM36WIDE Plaster master frame 595 x 1195

ECOPLWIREKITG2 Suspension kit Y-shape, 1M and 2 brackets

PhaseDimmable

ECOPL063CSEG2 ECOPL066CSEG2

ECOPL1234EG2ECOPL1234UG19ECOPL123CSEG2

100mmCut-Out

PLUX43/4/6K

150mmCut-Out

PLUX63/4/6KP

200mmCut-Out

PLUX83/4/6K

*For selected products only

COMPATIBLE W

ITH

MEDM LEDSMART+

10

Highbay S

ensor

11

Hig

hbay

s

Pierlux Eco LED Highbay Gen 5With improved lumen per wattage of up to 150lm/W, the new generation Pierlux Eco LED Highbay Gen 5 is the ultimate energy efficient replacement for traditional MH and MV highbay.

• One box solution with 4-in-1 Lumen Select and integrated 1-10V dimming

• Superior housing made with LM6 grade die cast aluminium

• Complete with 1.7m flex & plug with safety lanyard for quick and secure installation

Applications

Warehouse, industrial

CODE SYSTEM WATTAGE


ECOHB120W850G5 120W 18,000 150lm/W 5,000K >80 1-10V IPART VEU REES

ECOHB170W850G5 170W 25,500 150lm/W 5,000K >80 1-10V IPART VEU REES

ECOHB200W850LS 100W/ 150W/ 170W/ 200W

15,000/ 22,500/ 25,500/ 30,000

150lm/W 5,000K >80 - IPART VEU REES


ECOHBSFHF HF motion sensor with on/off function and daylight sensing

ECOHB120BRKT G5 120W Surface mounting bracket kit

ECOHB170200BRKT G5 170W 200W Highbay surface mounting bracket kit

ECOHBG5ALREF G5 Annodised aluminium reflector

ECOHBG5LRCOV G5 Annodised aluminium dust cover 170 200W

ECOHBG5PCREF G5 Transparent polycarbonate reflector

ECOHBG5SMCOV G5 Annodised aluminium dust cover 120W

PRE SET VALUES

ROTARY SWITCH POSITION DETECTION RANGE HOLD TIME DAYLIGHT SENSOR

0 100% 5sec Disabled

1 100% 1min 2 lux

2 100% 5min 10 lux

3 100% 5min 30 lux

4 100% 5min 10 lux

5 100% 5min 30 lux

6 100% 5min Disabled

7 100% 10min 2 lux

8 100% 10min 10 lux

9 100% 10min 30 lux

A 100% 10min Disabled

B 75% 10min 30 lux

C 50% 10min 10 lux

D 100% 30min 50 lux

E 100% 30min Disabled

F 100% 5sec 2 lux

5 YearWarranty

1-10VDimmable

50,000hrLifetime

(L70/B50)

IP65Ingress

Protection Rating

Ta50Operational

Temperature Rating

IK08Impact Rating

LUMENSELECT

ECOHB170W850G5ECOHB200W850LS

ECOHBSFHF

ECOHB120W850G5

Pierlux Motion Sensor

Motion sensitive on/off switch, which turns on the light upon detection of motion, and turns off after a pre-selected hold-time when there is no movement.

• ‘Plug and go’ for fast installation, no additional terminations required

• Simple commissioning via rotary switch or an optional remote control

• Intelligent Photocell with daylight detection prior to motion detection

Applications

Industrial, floodlighting, installation up to 12m height

CODE DESCRIPTION COLOUR

ECOHBSFHF Motion sensor and light level sensor providing on/off control Black

PRCII Remote control for sensor -

5 YearWarranty

Detection Zone

(ø1 0m x H 12m)

Max Load 800W

IP65Ingress

Protection Rating

Non-Dimmable

12

OystersO

yste

rs

13

SENSOR SPECIFICATION*

Sensor type High frequency sensor

Detection zone Max: 10m (Ø) x 6m (H)

Detection range Select from 4 options; 100%, 75%, 50%, 10%

Hold-time Select from 4 options; 5s, 90s, 5min, 15min

Light level detection range

Select from 4 options; 2 Lux, 10 Lux, 50 Lux, disable

Orion Eco Colour Select LED OysterOrion Eco Colour Select LED Oyster is the perfect luminaire for concrete ceilings.


• Removeable trim for a different look

• Available in dimmable, non-dimmable and integrated HF sensor with standby function

Applications


CODE SYSTEM WATTAGE


ORN16W3/4/6K 16W 1200/ 1300/ 1300

95lm/W 3000K/ 4000K/ 6000K

>80 -

ORN23W3/4/6K 23W 1900/ 2000/ 2000

95lm/W 3000K/ 4000K/ 6000K

>80 -

ORN16W3/4/6KD 17W 1200/ 1300/ 1300

95lm/W 3000K/ 4000K/ 6000K

>80 Phase

ORN23W3/4/6KD 24W 1900/ 2000/ 2000

95lm/W 3000K/ 4000K/ 6000K

>80 Phase

ORN23W3/4/6KS (HF Sensor)

23W 1900/ 2000/ 2000

95lm/W 3000K/ 4000K/ 6000K

>80 -

3 YearWarranty


Ta40Operational

Temperature Rating

IP54Ingress

Protection Rating

ORN16W3/4/6KORN16W3/4/6KD

ORN23W3/4/6KORN23W3/4/6KDORN23W3/4/6KS

PhaseDimmable

*Applicable to ORN23W3/4/6KS HF Sensor variation only.

Slimline Colour Select LED OysterThis low profile LED Oyster comes with quick fit mounting bracket and integral control gear.


• Aesthetically pleasing with a sleek and slimline form factor

• Easy to install with a large terminal block

Applications


CODE SYSTEM WATTAGE


SLMOYS183/4/6K 18W 1500/ 1550/ 1600

90lm/W 3000K/ 4000K/ 6500K

>80 Phase

SLMOYS273/4/6K 27W 2300/ 2400/ 2400

90lm/W 3000K/ 4000K/ 6500K

>80 Phase

3 YearWarranty


IP54Ingress

Protection Rating

Ta40Operational

Temperature Rating

SLMOYS183/4/6K SLMOYS273/4/6K

PhaseDimmable

ø400ø300

(mm)(mm)

5050COMPATIBLE W

ITH

MEDM LEDSMART+

COMPATIBLE W

ITH

MEDM LEDSMART+

14

BattensB

atte

ns

15

Eco LED Colour Select BattenDesigned with the professional installer in mind, the ECO LED Batten is easy to install with quick connect driver one piece sealed LED module.


• Easy to wire with central and side cable access

• Integrated HF sensor with on/off switching based on movement

Applications


CODE SYSTEM WATTAGE

EXIT LUMEN LUMEN/WATT CCT CRI ENERGY SCHEME

ECOBAT202ECS 20W 2300 110lm/W 4000K/ 5000K/ 6500K

>80 IPART VEU REES

ECOBAT404ECS 40W 4300 100lm/W 4000K/ 5000K/ 6500K

>80 IPART VEU REES

ECOBAT404ECSD (HF Sensor)

40W 4300 100lm/W 4000K/ 5000K/ 6500K

>80 IPART VEU REES


WG2 Wireguard 600M c/w brackets

WG4 Wireguard 1200M c/w brackets

ECOBAT202ECS

ECOBAT404ECSECOBAT404ECSD

4 YearWarranty


Ta40Operational

Temperature Rating

IP20Ingress

Protection Rating

IK06Impact Rating

Non-Dimmable

SENSOR SPECIFICATION*



Detection range Select from 4 options; 100%, 75%, 50%, 10%

Hold-time Select from 4 options; 5s, 90s, 5min, 15min

*Applicable to ECOBAT404ECSD HF Sensor variation only.

BWP Eco LED Weatherproof BattenThe BWP ECO LED weatherproof batten is the perfect LED solution for replacing conventional fluorescent weatherproof luminaires.

• Polycarbonate body with durable foam seal and frosted prismatic polycarbonate lens resists impact (IK08)

• 20mm cable entry with PG8, 5 gland and optional knockout at the opposite end

• Clip-in modular gear tray with safety lanyards for easy installation and maintenance

Applications

Commercial, industrial

CODE SYSTEM WATTAGE


BWPECO202E4 20W 2000 100lm/W 4000K >80 IPART VEU REES






Non- Dimmable

3 YearWarranty


IP65Ingress

Protection Rating

Ta40Operational

Temperature Rating

IK08Impact Rating

VERSION L (MM) W (MM) H (MM)

20W 655 130 92

22W 1265 89 92

45W 1265 130 92

60W 1565 130 92 BWPECO454E4 BWPECO224E4BWPECO202E4 BWPECO224E6BWPECO454E6 BWPECO202E6

16

Bunkers &

BulkheadsB

unke

rs &

Bul

khea

ds

17

Carlton Colour Select LED BunkerAesthetically pleasing and functional, the Carlton bunker meets all the requirements of a well-designed outdoor fitting.

• One-box solution with 3-in-1 colour temperature and bonus decorative caged trim

• Easy to install with rear cable entry and suitable for wall and ceiling

• Available in 2 sizes (large and small) and 2 colour housing (white and black)

Applications


CODE SYSTEM WATTAGE

EXIT LUMEN LUMEN/WATT CCT CRI SIZE HOUSING COLOUR

CB2746567 9W 650 70lm/W 3000K/ 4000K/ 6000K

>80 Small White

CB2746466 9W 650 70lm/W 3000K/ 4000K/ 6000K

>80 Small Black

CB2746971 14.5W 1100 75lm/W 3000K/ 4000K/ 6000K

>80 Large White

CB2746870 14.5W 1100 75lm/W 3000K/ 4000K/ 6000K

>80 Large Black

2 YearWarranty


IP54Ingress

Protection Rating

Ta40Operational

Temperature Rating

IK04Impact Rating

Non-Dimmable

CB2746466 CB2746567

CB2746870 CB2746971

Sirroco II LED BulkheadThis class II decorative outdoor bulkhead is built with superior material to withstand outdoor conditions.

• One-box solution with bonus decorative eyelid trim, different look same fitting for different areas

• Double-insulated fitting, no earthing required, ideal for residential retrofit

• “Fit and forget” with integrated HF sensor, light stays off when adequate daylight is detected

Applications


CODE SYSTEM WATTAGE

EXIT LUMEN LUMEN/WATT CCT CRI DIMENSIONS HOUSING COLOUR

CBH49287WH 12W 1000 80lm/W 4000K >80 300mm x 90mm

White

CBH49285BK 12W 1000 80lm/W 4000K >80 300mm x 90mm

Black

CBH49289BKSEN (HF Sensor)

12W 1000 80lm/W 4000K >80 300mm x 90mm

Black

Non-Dimmable

3 YearWarranty


IP66Ingress

Protection Rating

Ta40Operational

Temperature Rating

IK10Impact Rating

CBH49289BKSENCBH49285BKCBH49287WH

ø300

90

(mm)SENSOR SPECIFICATION*



Detection angle Select from 2 options; 50˚ or 100˚

Sensor sensitivity Select from 2 options; 50% or 100%

Hold-time Select from 4 options; 5s, 90s, 3min,10min

Light level detection range

Select from 4 options; 2 Lux, 10 Lux, 50 Lux, disable

Stand-by time Select from 4 options; 0s, 10s, 10min, +∞

Stand-by dim level Select from 2 options; 10% or 30%

*Applicable to CBH49289BKSEN HF Sensor variation only.

18

Bun

kers

& B

ulkh

eads

Floodlights

19

Julux LED 2 Bulkhead

Shadow LED Floodlight

Classic design with an Opal prismatic polycarbonate cover.

• Weather resistant and ideal for harsh outdoor conditions

• Integral constant current driver

• Optional integral motion sensor

Applications

Commercial, healthcare, residential

The Pierlite Shadow LED floodlight has the ability to illuminate small to medium spaces. It’s slimline and compact design makes it easy to install.

• Complete with 500mm flying lead for easy installation

• Trunnion arm with 45˚ offset for easy mounting and aiming

• Black powder coated die-cast aluminium body with excellent heat sinking capability

Applications

Commercial, residential

CODE SYSTEM WATTAGE EXIT LUMEN LUMEN/WATT CCT CRI

JULUXLED2 9W 660 70lm/W 6000K >70


SHADOW10BK 10W 800 80lm/W 4000K >70

SHADOW20BK 20W 1560 78lm/W 4000K >70

SHADOW30BK 30W 2700 90lm/W 4000K >70

1 YearWarranty

3 YearWarranty



IP65Ingress

Protection Rating

IP65Ingress

Protection Rating

Ta40Operational

Temperature Rating

Ta40Operational

Temperature Rating

Non-Dimmable

Non-Dimmable

JULUXLED2

SHADOW20BK SHADOW30BK

SHADOW10BK

Bun

kers

& B

ulkh

eads

20

FloodlightsFloo

dlig

hts

21

ShadowEco LED FloodlightThe Pierlite ShadowEco LEDis built with superior LM6 grade material, lightweight and easy to install.

• Hassle-free with pre-wired 1 meter lead and angled Trunnion arm for easy installation

• Textured tempered glass to minimize glaze, 316 grade stainless steel screws

• Black powder coated and made of LM6 die-cast aluminium ideal for harsh outdoor conditions

Applications

Industrial, general floodlighting

CODE SYSTEM WATTAGE


SHADOWECO100BK 100W 10000 100lm/W 4000K >80 IPART VEU REES

SHADOWECO200BK 200W 20000 200lm/W 3000K >80 IPART VEU REES

SHADOWECO100BK SHADOWECO200BK

3 YearWarranty


IP65Ingress

Protection Rating

Ta40Operational

Temperature Rating

IK08Impact Rating

Non-Dimmable

Maxi Master Gen II LED FloodlightPierlite Maxi Master LED Floodlight GEN II range is designed for high-performance output and energy savings.

• Energy efficient LED floodlight, lower running costs

• Lightweight for easy installation

• Optional wire guard accessories available

Applications

Industrial, carparks

CODE SYSTEM WATTAGE


MML50S 50W 5250 100lm/W 4000k >80 IPART VEU REES

MML100S 100W 12000 120lm/W 4000K >80 IPART VEU REES



MML100A 100W 12000 110lm/W 4000K >80 IPART VEU REES



5 YearWarranty


IP65Ingress

Protection Rating

Ta40Operational

Temperature Rating

IK08Impact Rating


MML50WG 50W Maxi Master wire guard




Non-Dimmable

MML200SMML100SMML100S MML300S

(mm)52965

350 444

495

(mm)60 342310

380 475

318288

60 (mm)

293 372

54250280

200 277

(mm)

22

Floo

dlig

hts Em

ergency & Exit Lights

23

Hornet LED FloodlightThis award winning LED floodlight brings the best performance and design in a compact, slimline package.

• Adjustable head 300˚ horizontal, 200˚ vertical with flexibility to direct the light (up/down/sideways)

• Complete with 1m lead for easy installation

• Retro-fit accessory included for easy installation onto existing floodlight mounting points

Applications


CODE SYSTEM WATTAGE


CFL20840 20W 1600 80lm/W 4000K >80 IPART VEU REES

CFL20830* 20W 1600 80lm/W 3000K >80 -

Non-Dimmable

3 YearWarranty

IP66Ingress

Protection Rating

Ta40Operational

Temperature Rating

IK07Impact Rating


CFL20840

*Available from November 2019.

BWP Eco LED Emergency Weatherproof BattenBuilt with LiFePO4 battery, this weatherproof batten is a robust emergency fitting ideal for outdoor use.

• Energy efficient LED weatherproof emergency luminaire AS2293 compliant

• Replaceable Lithium Iron Phosphate (LiFePO4) battery

• Emergency Operation: manual test

Applications

Commercial, industrial, indoor carparks

CODE SYSTEM WATTAGE


BWPECO202E4M 20W 2000 100lm/W 4000K >80 -

BWPECO202E6M 20W 2000 100lm/W 6000K >80 -

BWPECO454E4M 45W 4500 100lm/W 4000K >80 IPART VEU REES

BWPECO454E6M 45W 4500 100lm/W 6000K >80 IPART VEU REES

BWPECO605E4M 60W 6000 100lm/W 4000K >80 -

BWPECO605E6M 60W 6000 100lm/W 6000K >80 -

Non-Dimmable

3 YearWarranty (including

battery)


IP65Ingress

Protection Rating

Ta40Operational

Temperature Rating

IK08Impact Rating

VERSION L (MM) W (MM) H (MM) A1 (MM) A2 (MM)

20W 655 130 92 420 530

45W 1265 130 92 900 1010

60W 1565 130 92 1000 1110

BWPECO202E6M BWPECO454E6MBWPECO202E4M BWPECO454E4MBWPECO605E6M BWPECO605E4M

CODE SYSTEM WATTAGE (EMERGENCY MODE)

EXIT LUMEN(EMERGENCY MODE)

EMERGENCY CALSSIFICATION BATTERY SPECIFICATION

BWPECO202E4M 2 287 C0/C180: D40 C90/C270: D25 LiFePO4 6.4V 1.5AH






Floo

dlig

hts

24

Emergency &

Exit LightsEmer

genc

y &

Exi

t Lig

hts

25

CODE SYSTEM WATTAGE


ECOBAT404E4/ME 40W 4010 100lm/W 4000K >80 IPART VEU REES

ECOBAT404E6/ME 40W 3940 98lm/W 6500K >80 IPART VEU REES

ECOBAT505E4/ME 50W 4760 95lm/W 4000K >80 -

ECOBAT505E6/ME 50W 4510 90lm/W 6500K >80 -

Eco LED Emergency BattenEnergy efficient and reliable, the Eco LED Emergency batten is ideal for indoor use.

• Available in multiple sizes and wattages: 1164mm (20W and 40W) and 1500mm (50W)

• Maintained Emergency operation


Applications

Commercial, industrial, stairwells

Non-Dimmable

3 YearWarranty(including

battery)


IP20Ingress

Protection Rating

Ta40Operational

Temperature Rating

IK06Impact Rating

ECOBAT404E4/MEECOBAT404E6/ME

ECOBAT505E6/MEECOBAT505E4/ME

CODE SYSTEM WATTAGE (EMERGENCY MODE)

EXIT LUMEN(EMERGENCY MODE)

EMERGENCY CALSSIFICATION BATTERY SPECIFICATION

ECOBAT404E4/ME 3.8W 479 C0/C180: D63 C90/C270: D40 LiFePO4 4 cell 6.4V 3AH




Guardian 2 LED Emergency FloodlightThe affordable and reliable LED emergency floodlight just got better - now complete with Lithium Iron Phosphate battery.

• Non-corrosive polycarbonate housing and reflectors

• IP20 as standard; weatherproof enclosure available with IP65 certification


Applications

Commercial, industrial


GRLED7FL-L 4W 616 100lm/W 4000K >80

Non-Dimmable


battery)


IP20Ingress

Protection Rating

Ta40Operational

Temperature Rating


GRWPENCL IP65 enclosure

BATPK3200/2L21 LiFePO4 battery, 2 cell 6.4V 3200 mAh

GRLED7FL-L

350

80

(mm)

26

Emergency &

Exit LightsEmer

genc

y &

Exi

t Lig

hts

27

Director 2 LED Exit LightGeneral purpose traditional interior exit luminaire, in LED and LiFeP04 battery.

• Wall and ceiling mount,complete with replaceable Lithium Iron Phosphate (LiFeP04) battery

• Includes all pictogram inserts and one box solution with a fully integrated assembly makes for easier installation

• 24m viewing distance

Applications

Commercial, retail, hospitality, industrial

CODE SYSTEM WATTAGE EXIT LUMEN LUMEN/WATT

DIRLEDPDSL (Ceiling) 4.6W 220 48lm/W

DIRLEDPSSL (Wall) 4.6W 220 48lm/W

Non-Dimmable


battery)


IP20Ingress

Protection Rating

Ta40Operational

Temperature Rating

24mViewing

Distance



DIRLEDPDSL DIRLEDPSSL

Wall

Ceiling

DIRLEDPSSL (WALL MOUNT) AS/NZS 2293.1:2018 CLASSIFICATION TABLE

ALLOWABLE LUMINAIRE MOUNTING HEIGHT (M)

LUMINAIRE MAXIMUM SPACING FOR EACH PLANE (M)

C0 C90 C180 C270

2.1 3.7 4.1 0 4.1

2.4 0 4.1 0 4.1

2.7 0 0 0 0

DIRLEDPDSL (CEILING MOUNT) AS/NZS 2293.1:2018 CLASSIFICATION TABLE



C0/C180 C90/C270

2.1 7.8 8.5

2.4 8 8.8

2.7 8.1 8.9

Stingray 2 LED Exit LightA stylish, quick connect LED exit luminaire for interior exit sign application.

• Ceiling mount and optional wall mount

• Includes all pictogram inserts and one box solution with a fully integrated assembly makes for easier installation

• 24m viewing distance

• Optional IP65 kit

Applications

Commercial, residential, hospitality, retail


STLED-L (White) 4.6W 124 27lm/W

STTLED-L (Black) 4.6W 124 27lm/W



AQUALOCK-W IP65 enclosure

99023330 Rod suspension kit 1600mm white

EXCB Cantilever bracket wall mount kit

STLED-LSTTLED-L

Non-Dimmable


battery)


IP20Ingress

Protection Rating

Ta40Operational

Temperature Rating

24mViewing

Distance

(mm)395

81

245

STLED-L (STANDARD) AS/NZS 2293.1:2018 CLASSIFICATION TABLE



C0/C180 C90/C270

2.1 6.5 5

2.4 6.5 5.2

2.7 6.5 5.2

28

Emer

genc

y &

Exi

t Lig

hts D

imm

ers & S

ensors

29

FFRLED2 & FFRLEDBK2 AS/NZS 2293.1:2018 CLASSIFICATION TABLE



C0 C90/270 C180

2.1 11.5 11.5 11.5

2.4 13.2 13.2 13.2

2.7 14.8 14.8 14.8

3 16.5 16.5 16.5

3.3 17.6 17.6 17.6

3.6 18 18 18

4 18.5 18.5 18.5

4.5 19 19 19

5 19.5 19.5 19.5

6 20.1 20.1 20.1

Firefly 2 LED Emergency LightThe affordable and reliable LED emergency light with Lithium Iron Phosphate battery One box solution with a fully integrated assembly.

• Easy installation, flex and plug included

• Optional surface mounting kit


Applications

Commercial, residential, hospitality, retail


FFRLED2 (White) 2.5W 174 93lm/W

FFRLEDBK2 (Black) 2.5W 174 93lm/W


FFSLEDKITWH Surface mounted kit (white)

FFSLEDKITBK Surface mounted kit (black)

BATPK1200/4L41 LiFePO4, 4 cell 6.4V 1200 mAh rechargeable battery pack

FFRLED2FFRLEDBK2

Non-Dimmable

3 YearWarranty (including

battery)


IP20Ingress

Protection Rating

Ta40Operational

Temperature Rating

LEDsmart™ Adaptive Phase DimmerProviding optimised dimming of LED based lamps and drivers, this high quality, two-wire phase control wall plate dimmer has a minimum load rating of 2W, allowing it to adapt to a wide range of available LED drivers.

• Rotary control with mechanical adjustment for minimum brightness level

• Separately switched 2-wire design - no neutral wire connection required

• Soft start to help prolong the lamp and driver life

Applications


CODE DESCRIPTION

MEDM Dimmer precision phase adaptive mechanism


DGACCESSPK5 5x Black dials for MEDM dimmers

2 YearWarranty

IP20Ingress

Protection Rating

Ta50Operational

Temperature Rating

MEDM

Emer

genc

y &

Exi

t Lig

hts

30

Dim

mers &

SensorsD

imm

ers

& S

enso

rs

31

LEDsmart+™ Dimmers, Switches & TimersProviding optimised dimming of LED based lamps and drivers, this high quality, two-wire phase control dimmer can be connected in parallel to other LEDsmart+ devices to provide a simple solution to multi-way control.

• Suitable for one-way, two-way, three-way and multi-way dimming

• MultiMate™ technology allows multi-way dimming/switching with no extra wires

• Active only two wire connection - no neutral required

Applications


CODE DESCRIPTION COMPATIBLE WITH:

MMDM/RT Digital rotary dimmer/switch Phase dimming product

MMDM/PB Push button dimmer/switch Phase dimming product

MMSW/PB Push button switch Phase dimming product

MMTH/PB Push button hour timer Phase dimming product

MMTM/PB Push button minute timer Phase dimming product


MMCE/RT (suitable for RT only)

LEDsmart+ rotary controller and wall mounting kit

MMCE/SS1 (suitable for PB only)

LEDsmart+ circular push button enclosure and mounting kit - single

MMCE/SS2 (suitable for PB only)

LEDsmart+ circular push button enclosure and mounting kit - double

DGACCESSPK1 Coloured bezel adaptor kits LEDsmart and Rapix push buttons

DGACCESSPK2 Push button adaptor kit for LEDsmart+ and Rapix push button SW

DGACCESSPK3 Rotary adaptor kit for LEDsmart+ and Rapix rotary products

DGACCESSPK6 5x black dials for LEDsmart+MMDM/RT dimmers

2 YearWarranty

IP20Ingress

Protection Rating

Ta50Operational

Temperature Rating

MMDM/RT MMDM/PBMMSW/PBMMTH/PBMMTM/PB

LEDsmart+™ Occupancy SensorThe LEDsmart+ Occupancy Sensor can be used by itself or connected to other LEDsmart+ devices. By itself, the sensor switches lighting when movement is detected.

• Ceiling mount included – no other mounting hardware needed

• Sensors can be wired in parallel to extend coverage area

• Timeout from 1 minute to 60 minutes

Applications


CODE DESCRIPTION

MMSE/PR LEDsmart+ PIR occupancy sensor with MultiMate technology

2 YearWarranty

IP20Ingress

Protection Rating

Ta50Operational

Temperature Rating

MMSE/PR

32

Dim

mers &

SensorsD

imm

ers

& S

enso

rs

33

CODE DESCRIPTION

MMDM/DD LEDsmart+ digital level display

LEDsmart+™ Digital Level DisplayThis device can be used in conjunction with a dimmer to display the current dimmed level via a circular array of 16 LED’s and fits into a standard Australian wall plate aperture.

• 2-wire device – connects to active and load only, no neutral connection required

• Plain white front face or alternative front face with light globe icon

• Includes alternative light pipes to change the LED indicator display colour from white to orange, green or blue

Applications


2 YearWarranty

IP20Ingress

Protection Rating

Ta50Operational

Temperature Rating

MMDM/DD

Smart Scan Two Channel SensorPierlite Smart Scan flush mount sensor package consisting of a small 360˚ passive infrared sensor head and a control/relay module.

• Recessed Flush Mount 360˚ PIR Presence Sensor with two channel control module option

• 360˚ detection zone up to 7m diameter at mounting height of 2.7m

• Flame retardant polycarbonate body conveniently packed with remote driver

Applications


CODE DESCRIPTION

SMARTSCAN2 360˚ PIR sensor with two channel 16A sensor control module

SMARTSCAN2

2 YearWarranty

IP20Ingress

Protection Rating

54mmCut-Out

Ta50Operational

Temperature Rating

50,000hrLifetime

34

Dim

mers &

SensorsD

imm

ers

& S

enso

rs

35

CODE DESCRIPTION

DGSMARTSCAN1HD Smart Scan MK2 360˚ PIR HD sensor 1 channel 16A output

Smart Scan Sensor MKII- Ceiling Mounted Motion SensorThe ceiling mounted motion sensors consists of two items; a 360˚ high definition passive infrared (HDIR™) sensor head and a control/relay module.

• High sensitivity 360˚ detection array designed for both minor and major movement applications

• Integrated light level detector to inhibit switch-on if there is sufficient natural light available

• Hidden yet easily accessible sensor head adjustment controls for time-out and light level adjustment

Applications


DGMSMARTSCAN1HD

2 YearWarranty

IP20Ingress

Protection Rating

52mmCut-Out

Ta50Operational

Temperature Rating

STDM/BT

CODE DESCRIPTION

STDM/BT Diginet Sitara bluetooth wireless dimmer 1 channel 400W

Sitara™ Bluetooth DimmerThe Sitara Bluetooth Wireless Dimmer provides remote dimming and on/off control via Bluetooth connection to a smart device running the iOS or Android operating systems.

• Integrates with Diginet LEDsmart+ switches and dimmers

• No PC required for set up or operation

• Suitable for mounting in a ceiling void and fits through a 90mm downlight cut-out

Applications

Commercial, residential

Bluetooth2 YearWarranty

IP20Ingress

Protection Rating

36

Dim

mers &

SensorsD

imm

ers

& S

enso

rs

37

Sitara™ Bluetooth Wall SwitchThese sleek wireless touch-based wall switches can be placed anywhere and moved at any time. The switches connect wirelessly to Sitara Bluetooth Dimmers and are setup using the iOS/Android Avi-on App.

• Touch based control, including on/off and dimming

• Wireless range of up to 30m to the nearest Sitara Bluetooth Mesh device

• Battery life of 1-2 years with normal daily use

Applications

Commercial , residential

CODE DESCRIPTION

STWS/BT Sitara battery operated bluetooth wall switch touch slider

STWS/BT


IP20Ingress

Protection Rating

COMPATIBLE W

ITH

BLU

ETO

OTH DOWNLIGHT

CODE DESCRIPTION

STRG/BT Sitara remote access bridge bluetooth WI-FI

Sitara BluetoothRemote GatewayThe Sitara Bluetooth Remote Gateway and the Avi-on App work seamlessly together to enable a homeowner to control lighting when they are away from home using a smart phone, tablet or web browser.

• Only requires a standard wireless router connection and internet access

• Connect a Sitara system to the internet (not required for local Bluetooth connection)

• Remotely monitor Sitara devices when not at home

Applications

Residential


IP20Ingress

Protection Rating

COMPATIBLE W

ITH

BLU

ETO

OTH DOWNLIGHT

38

Downlights

Bunkers & Bulkheads

Panels

Highbays

Oysters

Battens

Floodlights

CODE ENERGY SCHEME IP/IK RATING

PAGE

CRYSECO1G2 IPART VEU REES IP20 4

CRYSECO5G2 IPART VEU REES IP20 4

DLP63/4/65FWG2 IPART VEU REES IP44 5

DLP63/4/65RWG2 - IP44 5

DLP53/4/6FW IPART VEU REES IP65 6

DLP5BT/W - IP65/ IK09

7

PLUX63/4/6KP IPART VEU REES IP44 8

PLUX83/4/6K IPART VEU REES IP44 8

PLUX43/4/6K IPART VEU REES IP44 8


PAGE

CB2746870 - IP54/ IK04

16

CB2746466 - IP54/ IK04

16

CB2746971 - IP54/ IK04

16

CB2746567 - IP54/ IK04

16

CBH49289BKSEN - IP66/ IK10

17

CBH49285BK - IP66/ IK10

17

CBH49287WH - IP66/ IK10

17

JULUXLED2 - IP65 18


PAGE

ECOPL063CSEG2 - IP40 9


ECOPL1234EG2 - IP40 9

ECOPL1234UG19 - IP40 9



PAGE

ECOHB120W850G5 IPART VEU REES IP65/ IK08

10

ECOHB170W850G5 IPART VEU REES IP65/ IK08

10

ECOHB200W850LS IPART VEU REES IP65/ IK08

10

ECOHBSFHF - IP65 11


PAGE

ORN16W3/4/6K IPART VEU REES IP54 12

ORN23W3/4/6K IPART VEU REES IP54 12

ORN16W3/4/6KD - IP54 12

ORN23W3/4/6KD - IP54 12

ORN23W3/4/6KS IPART VEU REES IP54 12

SLMOYS183/4/6K - IP54 13

SLMOYS273/4/6K - IP54 13


PAGE

ECOBAT202ECS IPART VEU REES IP20/ IK06

14

ECOBAT404ECS IPART VEU REES IP20/ IK06

14

ECOBAT404ECSD IPART VEU REES IP20/ IK06

14

BWPECO454E4 IPART VEU REES IP65/ IK08

15


15


15


15


15


15


PAGE

SHADOW10BK - IP65 19



SHADOWECO100BK IPART VEU REES IP65/ IK08

20

SHADOWECO200BK IPART VEU REES IP65/ IK08

20

MML50S IPART VEU REES IP65/ IK08

21

INDEXFloodlights

Emergency/Exit Lights

Dimmers & Sensors

Dimmers & Sensors


PAGE

BWPECO202E6M - IP65/ IK08

22

BWPECO454E6M IPART VEU REES IP65/ IK08

23


23

BWPECO454E4M IPART VEU REES IP65/ IK08

23


23


23

ECOBAT404E4/ME IPART VEU REES IP20/ IK06

24

ECOBAT505E6/ME - IP20/ IK06

24

ECOBAT404E6/ME IPART VEU REES IP20/ IK06

24

ECOBAT505E4/ME - IP20/ IK06

24

GRLED7FL-L - IP20 25

DIRLEDPDSL - IP20 26

DIRLEDPSSL - IP20 26

STLED-L - IP20 27

STTLED-L - IP20 27

FFRLED2 - IP20 28

FFRLEDBK2 - IP20 28


PAGE

MEDM - IP20 29

MMDM/RT - IP20 30

MMDM/PB - IP20 30

MMSW/PB - IP20 30

ENERGY SAVINGS SCHEME


PAGE


21


21


21

CFL20840 IPART VEU REES IP66/ IK07

22

CFL20830 - IP66/IK07

22


PAGE

MMTH/PB - IP20 30

MMTM/PB - IP20 30

MMSE/PR - IP20 31

MMDM/DD - IP20 32

SMARTSCAN2 - IP20 33

DGSMARTSCAN1HD - IP20 34

STDM/BT - IP20 35

STWS/BT - IP20 36

STRG/BT - IP20 37

Energy saving schemes are financial incentives introduced by state government to encourage businesses to retrofit or select energy efficient LED products in their facilities.

Majority of Pierlite products are approved by the respective schemes. Look out for the icons next to the product codes.

IPART

Independent Pricing and Regulatory Tribunal (NSW)

VEU

Victorian Energy Upgrades (VIC) (formerly VEET)

REES

Victorian Energy Upgrades (SA)

39

4140

Ingress protection ratings (IP)

The resistive performance of fittings to solids and liquids is indicated by the

IP (Ingress Protection) prefix followed by two numbers.

The first number indicates the measure of protection against the ingress of solids. For instance:

The second number indicates the measure of protection against the ingress of liquids. For instance:

Ingress Protection (IP) Specification Guide

Protection against the ingress of solid objects IP.1X Protection against the ingress of liquids IP.X1

IP No.

Example Protection against contact and ingress of objects

Tests Symbol IP No.

Example Protection against contact and ingress of water

Tests Symbol

50Protected against solid objects greater than 50mm ø

A large surface of the body, such as a hand (but no protection against deliberate access). Solid objects exceeding 50mm in diameter.

Protected against dripping water

Dripping water (vertically falling drops) shall have no harmful effect

12.5

Protected against solid objects greater than 12mm ø

Fingers or similar objects not exceeding 80 mm in length. Solid objects exceeding 12mm in diameter.

15°

Protected against dripping water when tilted up to 15°

Vertically dripping water shall have no harmful effect when the enclosure is tilted at any angle up to 15° from its normal position

Protected against solid objects greater than 2.5mm ø

Tools, wires, etc., of diameter or thickness greater than 2.5mm. Solid objects exceeding 2.5mm in diameter.

60° Protected against spraying water

Water falling as a spray at an angle up to 60° from the vertical shall have no harmful effect


Wires or strips of thickness greater than 1.0mm. Solid objects exceeding 1.0mm in diameter.

Protected against splashing water

Water splashed against the enclosure from any direction hall have no harmful effect

Dust protected Ingress of dust is not totally prevented but dust does not enter in sufficient quantity to interfere with satisfactory operation of the equipment.

Ø6.3

Protected against water jets

Water projected by a nozzle against the enclosure from any direction shall have no harmful effect

Dust tight No ingress of dust.

Ø12.5

Protected against heavy seas

Water from heavy seas or water projected in powerful jets shall not enter the enclosure in harmful quantities

15cm

1m

Protected against the effects of immersion

Ingress of water in a harmful quantity shall not be possible when the enclosure is immersed in water under defined conditions of pressure and time

mProtected against submersion

The equipment is suitable for continuous submersion in waterunder conditions which shall be specified by the manufacturer.

NOTE Normally, this will mean that the equipment is hermetically sealed. However, with certain types of equipment, it can mean that water can enter but only in such a manner that it produces no harmful effects.

Defined by IEC 60598

IP1X

IP2X

IP3X

IP4X

IP5X

IP6X

IPX1

IPX2

IPX3

IPX4

IPX5

IPX6

IPX7

IPX8

IP1X IPX1

IPX2

IPX3

IPX4

IPX5

IPX5

IPX6

IPX7

IPX8

IP2X

IP2X

IP3X

IP4X

IP5X

IP6X

IP67 IP68

IP65IP44 IP44

IP20

IP23

www.gerardlighting.co.nz

P: 0508 743 754F: 0508 743 755

9 Levene Place, Mount Wellington, Auckland 1060, New Zealand PO Box 53045, Auckland Airport, Auckland 2150, New Zealand

Ingress protection ratings (IP)

The resistive performance of fittings to solids and liquids is indicated by the

IP (Ingress Protection) prefix followed by two numbers.

The first number indicates the measure of protection against the ingress of solids. For instance:

The second number indicates the measure of protection against the ingress of liquids. For instance:

Ingress Protection (IP) Specification Guide

Protection against the ingress of solid objects IP.1X Protection against the ingress of liquids IP.X1

IP No.

Example Protection against contact and ingress of objects

Tests Symbol IP No.

Example Protection against contact and ingress of water

Tests Symbol

50Protected against solid objects greater than 50mm ø

A large surface of the body, such as a hand (but no protection against deliberate access). Solid objects exceeding 50mm in diameter.

Protected against dripping water

Dripping water (vertically falling drops) shall have no harmful effect

12.5

Protected against solid objects greater than 12mm ø

Fingers or similar objects not exceeding 80 mm in length. Solid objects exceeding 12mm in diameter.

15°

Protected against dripping water when tilted up to 15°

Vertically dripping water shall have no harmful effect when the enclosure is tilted at any angle up to 15° from its normal position


Tools, wires, etc., of diameter or thickness greater than 2.5mm. Solid objects exceeding 2.5mm in diameter.

60° Protected against spraying water

Water falling as a spray at an angle up to 60° from the vertical shall have no harmful effect


Wires or strips of thickness greater than 1.0mm. Solid objects exceeding 1.0mm in diameter.

Protected against splashing water

Water splashed against the enclosure from any direction hall have no harmful effect

Dust protected Ingress of dust is not totally prevented but dust does not enter in sufficient quantity to interfere with satisfactory operation of the equipment.

Ø6.3

Protected against water jets

Water projected by a nozzle against the enclosure from any direction shall have no harmful effect

Dust tight No ingress of dust.

Ø12.5

Protected against heavy seas

Water from heavy seas or water projected in powerful jets shall not enter the enclosure in harmful quantities

15cm

1m

Protected against the effects of immersion

Ingress of water in a harmful quantity shall not be possible when the enclosure is immersed in water under defined conditions of pressure and time

mProtected against submersion

The equipment is suitable for continuous submersion in waterunder conditions which shall be specified by the manufacturer.

NOTE Normally, this will mean that the equipment is hermetically sealed. However, with certain types of equipment, it can mean that water can enter but only in such a manner that it produces no harmful effects.

Defined by IEC 60598

IP1X

IP2X

IP3X

IP4X

IP5X

IP6X

IPX1

IPX2

IPX3

IPX4

IPX5

IPX6

IPX7

IPX8

IP1X IPX1

IPX2

IPX3

IPX4

IPX5

IPX5

IPX6

IPX7

IPX8

IP2X

IP2X

IP3X

IP4X

IP5X

IP6X

IP67 IP68

IP65IP44 IP44

IP20

IP23


P: 0508 743 754F: 0508 743 755


IK ratingsDegree of Impact Protection EN62262.

IK rating system is an International classification showing degrees of protection

provided by luminaires against external mechanical impacts.

c) shower without basin but with permanent fixed partition

permanent partition

0.10m

zone 1

zone 0

zone 2

zone 0

2.25m

outs

ide

zone

s

outside zones

IP ratings in damp areas

Application of IP ratings within damp locations

BS 7671: section 701 (17th Edition)

Guidance is provided by the above standard to the selection of luminaires within

locations containing baths, showers and cabinets that contain a shower /and or

bath along with the surrounding areas.

a) bath tub

outside zones

window

recess

zone 2

zone 1

zone 0

0.6m

2.25mzone 2

outs

ide

zone

s

*Zone 1 if the space is accessible without the use of a tool. Spaces under the bath, accessible only with the use of a tool are outside the zones.

b) shower with basin

outside zones

recessed luminaire

zone 1 zone 2

zone 0

0.6m

2.25m

outs

ide

zone

s

*

Number Measure of protection – impact energy (joules)

Test

No protection to this standard -

0.15 0.20kg impact

0.20 0.20kg impact

0.35 0.20kg impact

0.50 0.20kg impact

0.70 0.20kg impact

1.00 0.50kg impact from 200mm





When higher impact energy protection is required 50 joules is recommended.

Defined by UTE 20010

IK02

IK01

IK00

IK03

IK04

IK05

IK06

IK07

IK08

IK09

IK10


P: 0508 743 754F: 0508 743 755


IK00

IK01

IK02

IK03

IK04

IK05

IK06

IK07

IK08

IK09

IK10

Australian Standard on Recessed luminaires (ASNZS 60598.2.2-2016) otherwise known as IC rating has been in placed since 2018. The standard stipulates the classifications of various type of recessed fittings suitable for different installation types, with the purpose of reducing risk of ignition due to inadequate separate between fitting and combustible building elements such as thermal insulation and/or debris. Pierlite’s range of recessed fitting are designed to be fit for the application and at the highest safety standard.

IC-4

• Suitable for residential or commercial use

• Fitting can be covered with building insulation

• Can be used where air transfer is not permitted or not desired between living space & roof space

IC


• Fitting can be loosely covered with building insulation

• Can be used where some air transfer is permitted or desired between living space & roof space

CA 90


• Fitting cannot be covered with building insulation

• Insulation can be placed against the sides of the fitting

DO NOT COVER

• Suitable for residential or commercial use in AU. Not for residential use in NZ

• Fitting cannot be covered with building insulation

• Insulation must be placed as per clearance distances according to manufacturer’s installation guide

NON-IC

• Suitable for commercial use only

• Not suitable for use in residential dwellings or other places where insulation may be installed now or in the future

• Not tested for use with building insulation

4342

1-10V Dimming 1-10V (Analogue) Dimming uses an analogue signal rather than a digital signal. It is a universal protocol, so all 1-10V drivers operate in the same manner. Each downlight requires a standard 2C+E plus two control lines to carry the low voltage signal (polarity sensitive). You will also require a potentiometer (or some other 1-10V Dimming controller). • Additional 2-Core LV control cable is required. • Dedicated 1-10V interface or potentiometer is

required to control this driver • Available in out-puts ranging from 350mA – 1400mA DALI Digital Addressable Lighting Interface – DALI – is a universal protocol (IEC 62386), designed to allow varying manufacturers products to all work on the same system. So it doesn’t matter whose light fitting you are using, if it is DALI it will work on a DALI controlled system. Up to 64 light fittings can be controlled per DALI line, buildings can have multiple DALI lines. Wiring to a DALI downlight requires a standard 2C+E, plus two DALI control lines (not polarity sensitive).

TCI DRIVER TRIDONIC DRIVER

• Additional 2-Core control cable is required. • Dedicated DALI interface or Control System is required to control this System • Available in out-puts ranging from 350mA – 1400mA

TCI DRIVER

DIMMING OPTIONS Understanding the different dimming types is critical to the success of any lighting project. Phase-Cut Dimming (Trailing Edge/Leading Edge) The most basic form of dimming, originally developed for incandescent loads. This is your typical domestic type dimmer. No additional wiring other than standard 2C+E. The dimmer simply “chops” or “cuts” the voltage signal going to the light fitting. Dimmer is simply added to the Active line. • No extra wiring is required. • Standard Trailing Edge/Universal Dimmer can be used. • Available in out-puts ranging from 350mA – 750mA Push DIM Is one of the simplest types of dimming available on the market, and is suitable for use in small to medium sized installations. No low voltage cables or no digital controllers are required - Each downlight requires a standard 2C+E plus a 1 or 2 Core Switch wire, a “normally open” type push button switch is required to operate a Push DIM system. Don’t mix different Push DIM drivers on the same circuit. • Additional 1-2 Core Switch wire is required. • Dimming occurs through the use of a “normally open”

type push button switch • Available in out-puts ranging from 350mA – 1400mA

TCI DRIVER

TCI DRIVER

DIMMING OPTIONS

Understanding the different dimming types is critical to the success of any lighting project.

PHASE-CUT DIMMING (TRAILING EDGE/LEADING EDGE)

The most basic form of dimming, originally developed for incandescent loads. This is your typical domestic type dimmer. No additional wiring other than standard 2C+E. The dimmer simply “chops” or “cuts” the voltage signal going to the light fitting. Dimmer is simply added to the Active line.

Additional 2-Core LV control cable is required.

• Dedicated 1-10V interface or potentiometer is required to control this driver

• Available in out-puts ranging from 350mA – 1400mA

DALI

Digital Addressable Lighting Interface – DALI – is a universal protocol (IEC 62386), designed to allow varying manufacturers products to all work on the same system. So it doesn’t matter whose light fitting you are using, if it is DALI it will work on a DALI controlled system. Up to 64 light fittings can be controlled per DALI line, buildings can have multiple DALI lines. Wiring to a DALI downlight requires a standard 2C+E, plus two DALI control lines (not polarity sensitive).

• Additional 2-Core control cable is required.

• Dedicated DALI interface or Control System is required to control this System


DSI

Digital Serial Interface – DSI – is a proprietary protocol of Tridonic. It was largely the precursor to the DALI system. Unlike DALI each fitting is not addressable, so each circuit must be controlled as a whole in the same manner. Again, each downlight requires standard 2C+E plus two DSI control lines (not polarity sensitive).

• Additional 2-Core control cable is required.

• Dedicated Control System is required to control the system


SWITCH DIM

Switch DIM is a proprietary term of Tridonic’s, and essentially allows simple dimming through push button control, no low voltage cables or no digital controllers are required - Each downlight requires a standard 2C+E plus a 1 or 2 Core Switch wire, a “normally open” type push button switch is required to operate a Switch DIM system. Don’t mix different Push DIM/Switch DIM drivers on the same circuit.

• Additional 1-2 Core Switch wire is required.

• Dimming occurs through the use of a “normally open” type push button switch


DSI Digital Serial Interface – DSI – is a proprietary protocol of Tridonic. It was largely the precursor to the DALI system. Unlike DALI each fitting is not addressable, so each circuit must be controlled as a whole in the same manner. Again, each downlight requires standard 2C+E plus two DSI control lines (not polarity sensitive). • Additional 2-Core control cable is required. • Dedicated Control System is required to

control this System • Available in out-puts ranging from 350mA – 1400mA Switch DIM Switch DIM is a proprietary term of Tridonic’s, and essentially allows simple dimming through push button control, no low voltage cables or no digital controllers are required - Each downlight requires a standard 2C+E plus a 1 or 2 Core Switch wire, a “normally open” type push button switch is required to operate a Switch DIM system. Don’t mix different Push DIM/Switch DIM drivers on the same circuit.

TRIDONIC DRIVER TRIDONIC DRIVER • Additional 1-2 Core Switch wire is required. • Dimming occurs through the use of a “normally open” type push button switch • Available in out-puts ranging from 350mA – 1400mA

TRIDONIC DRIVER

DSI Digital Serial Interface – DSI – is a proprietary protocol of Tridonic. It was largely the precursor to the DALI system. Unlike DALI each fitting is not addressable, so each circuit must be controlled as a whole in the same manner. Again, each downlight requires standard 2C+E plus two DSI control lines (not polarity sensitive). • Additional 2-Core control cable is required. • Dedicated Control System is required to

control this System • Available in out-puts ranging from 350mA – 1400mA Switch DIM Switch DIM is a proprietary term of Tridonic’s, and essentially allows simple dimming through push button control, no low voltage cables or no digital controllers are required - Each downlight requires a standard 2C+E plus a 1 or 2 Core Switch wire, a “normally open” type push button switch is required to operate a Switch DIM system. Don’t mix different Push DIM/Switch DIM drivers on the same circuit.

TRIDONIC DRIVER TRIDONIC DRIVER • Additional 1-2 Core Switch wire is required. • Dimming occurs through the use of a “normally open” type push button switch • Available in out-puts ranging from 350mA – 1400mA

TRIDONIC DRIVER

4544

PUSH DIM

Is one of the simplest types of dimming available on the market, and is suitable for use in small to medium sized installations. No low voltage cables or no digital controllers are required - each downlight requires a standard 2C+E plus a 1 or 2 Core Switch wire, a “normally open” type push button switch is required to operate a Push DIM system. Don’t mix different Push DIM drivers on the same circuit.

• Additional 1-2 Core Switch wire is required.

• Dimming occurs through the use of a “normally open”type push button switch


WHAT’S THE DIFFERENCE BETWEEN DELIVERED AND CHIP LUMEN?

When manufacturers quote lumen output for LED fixtures, it is not always easy comparing one against the other. This is because many manufacturers still quote the initial chip or source lumen, whereas other quote the actual delivered lumen.

SO WHAT IS THE DIFFERENCE?

Well basically the initial chip lumen are what comes out of the LED in a raw test state, so not when built into a luminaire. They are a little bit like what lamp lumen are in conventional lamps, such as fluorescent, i.e. what the lamp outputs in a raw state. There is one major difference here though, conventional lamps typically have two major losses applied to them when installed in a light fitting – electrical (i.e. ballast losses) and light output, our luminaire losses (i.e. the light that gets trapped in the luminaire and doesn’t make it out). LED’s have one more major cause of losses – heat. The same LED chip placed on two difference heat sinks will result in two different sets of performance due to better or worse heat dissipation.

Therefore, a better engineered light fitting will typically have much improved performance, even if they both use the exact same LED chip/engine. Delivered lumen are the amount of lumen that make it out of the luminaire after all losses – heat, electrical and luminaire. They should be lumen that show in any luminaire photometric file, and are what we always strive to provide on our data sheets at Pierlite.

One general rule to follow is if a manufacturer doesn’t say if they are delivered lumen, then they probably aren’t. So when next comparing lumen to lumens, try and ensure you are comparing apples with apples (or delivered with delivered)!

DIMMING OPTIONS Understanding the different dimming types is critical to the success of any lighting project. Phase-Cut Dimming (Trailing Edge/Leading Edge) The most basic form of dimming, originally developed for incandescent loads. This is your typical domestic type dimmer. No additional wiring other than standard 2C+E. The dimmer simply “chops” or “cuts” the voltage signal going to the light fitting. Dimmer is simply added to the Active line. • No extra wiring is required. • Standard Trailing Edge/Universal Dimmer can be used. • Available in out-puts ranging from 350mA – 750mA Push DIM Is one of the simplest types of dimming available on the market, and is suitable for use in small to medium sized installations. No low voltage cables or no digital controllers are required - Each downlight requires a standard 2C+E plus a 1 or 2 Core Switch wire, a “normally open” type push button switch is required to operate a Push DIM system. Don’t mix different Push DIM drivers on the same circuit. • Additional 1-2 Core Switch wire is required. • Dimming occurs through the use of a “normally open”

type push button switch • Available in out-puts ranging from 350mA – 1400mA

TCI DRIVER

TCI DRIVER

*

TOP SELLERS NOW AVAILABLE IN ONLY

Pierlite is a registered trademark of Gerard Lighting Pty Ltd ©Copyright Pierlite 2019

www.glg.lighting

Whether you’re supplying for a non-scheduled project, sourcing for last minute replacements or disappointed with missed deliveries, Pierlite’s 1 WEEK EXPRESS* offer is here to support your needs.

n No additional chargesn No add-onsn No minimum order

Contact us at 1300 799 300 or visit www.glg.lighting to find out more.

*Products will be available for dispatch from NSW in 1 week. Does not take into consideration freight. Selected product models only.

BRINGING THE BEST INNOVATIONS TO YOU AT THE SPEED YOU NEED.

4746

The GLG Innovation Centre, located at our head office in Padstow NSW, is a state-of-the-art engineering and laboratory facility built to deliver custom product design and full compliance testing. GLG is one of the few Australian lighting manufacturers that have an in-house testing facility ensuring complete quality control, agile product development and technical aftersales support capabilities.

The GLG Innovation Centre encompasses:

• Photometry• Thermal chambers• Endurance chambers• Testing facilities for electromagnetic

compatibility• IP chamber for both water and dust

TESTING THE LIMITS OF LIGHTI NG IN AUSTRALIA

To visit our innovation centre and our on-site factory, contact your Pierlite sales representation for more information.

Pierlite is a Gerard Lighting Pty Ltd. Gerard Lighting Pty Ltd and all directly related legal entities reserve the right to alter the specifications, designs or other features of any items herein and to discontinue any items at any time without notice and without liability. While every effort is made to ensure that all information in this document is correct at the time of publishing, the document shall not form part of any contract and no warranty of accuracy is given and Gerard Lighting Pty Ltd shall not be liable for any error. TRADEMARKS Any identified trademarks and copyrights are the property of Gerard Lighting Pty Ltd and all directly related legal entities unless otherwise noted. All products within this publication fulfil the requirements of use under relevant trademark limitations. © COPYRIGHT This document is copyright to Gerard Lighting Pty Ltd and all directly related legal entities. Except as permitted under relevant law, no part of this document may be reproduced by any process without written prior permission of and acknowledgment to Gerard Lighting Pty Ltd.

Sep

tem

ber 2

019

www.glg.lighting

VERS 19-20 - GLG · 2019-09-20 · Litelux Colour Select LED Downlight Remote Driver Low profile...

Documents

Transcript of VERS 19-20 - GLG · 2019-09-20 · Litelux Colour Select LED Downlight Remote Driver Low profile...