Verizon Asr Feilds

Verizon - East Access Service Request (ASR) Order Business Rules Verizon - East Business Rules for the construction of ASRs for users ordering Unbundled Network Elements (UNEs) Serving:

the former Bell Atlantic Regions – CT (Greenwich/ Byram), MA, ME, NH, NY, RI, VT, DC, DE, MD, NJ, PA, WV, and VA

and the former GTE Region in VA

Version 27 (ASOG 27) Release Date: September 2003 Publication Date: July 2003

Notices

Disclaimer This documentation is for general information purposes only. This documentation does not obligate Verizon to provide services in the manner described herein. Verizon reserves the right as its sole option to modify or revise the information contained in this documentation at any time without prior notice. In addition to and without limitation of any other limitation of liability of Verizon or its affiliated companies set forth in an applicable contract or tariff, or elsewhere, in no event shall Verizon or its affiliated companies, or their agents, employees, directors, officers, representatives, or suppliers, be liable under contract, warranty, tort (including but not limited to the negligence of Verizon or its affiliates), or any other legal theory, for any incidental, consequential, special or indirect damages arising from or relating to this document or its contents, even if advised of the possibility of such damages. In this document, any usage of Verizon, VZ or state abbreviations refers to territories served by the former Bell Atlantic Corporation (fBA) or the former GTE (fGTE) territory in Virginia. © 2002-2003 Verizon Corporation All rights reserved.

Document History Version Number Last Modified Date Implementation Date

27 07/02/03 09/13/03 26 11/13/02 03/10/03 25.2 09/18/02 10/01/02 25.1 06/26/02 09/07/02 25 05/22/02 08/03/02 24.2 03/06/02 05/20/02 24.1 01/04/02 03/18/02 24 11/07/01 01/19/02 23.2 08/08/01 10/20/01 23.1 06/30/01 8/25/01 23 03/28/01 6/9/01 22 7/19/00 9/23/00 21.4 4/25/00 6/30/00 21.3 4/12/00 6/17/00 21.2.2 3/29/00 5/20/00 21.2.1 3/15/00 5/20/00 21.2 3/9/00 5/20/00 21.1 12/14/99 2/19/00 21. 5/13/99 9/25/99 20. 3/03/99 2/20/99 19.BA 2/10/99

Notes: 07/02/03 Version 27 Document Updates to OBF ASOG Version 27 with Verizon business rules 11/13/02 Version 26 Document updates to OBF ASOG Version 26 with Verizon business rules (CR2747). 09/18/02 Version 25.2 document updates associated with collaborative agreements regarding “no

facility” condition. 06/26/02 Version 25.1 Document updates associated with ordering new products and changes

associated with ordering dark fiber. 05/22/02 Version 25 Document updates to OBF ASR Version 25 with Verizon business rules. 03/06/02 Version 24.2 Document changes regarding phase 2 to adopt uniform interfaces and

business rules in PA and VA. 01/04/02 Version 24.1 Document changes regarding phase 1 to adopt uniform interfaces and

business rules in PA and VA. 11/07/01 Version 24 Document updates to OBF ASR Version 24 with Verizon business rules. 08/08/01 Version 23.2 Document changes regarding Voice Grade and DS0 EEL Loops ordering. 06/30/01 Version 23.1 Document changes regarding lease arrangements and location information. 03/28/01 Version 23 Document updates to OBF ASR Version 23 with Verizon business rules. 7/19/00 Version 22 Document updates to ASR Version 22 with BA business rules. 4/25/00 Version 21.4 Document to change a field to optional and other changes based on

collaborative discussions. 4/12/00 Version 21.3 Document to shade a field and based on collaborative discussions, change a

note. 3/29/00 Shade fields not available when ordering UNEs and remove Pending CLEC Review. 3/15/00 Version 21.2.1 Document to add valid CLLI code entries. 3/09/00 Version 21.2 Document updates based on collaborative discussions 12/14/99 Version 21.1 Document updates based on collaborative sessions. 5/13/99 Version 21 Document updates to ASR Version 21 with BA business rules. 3/03/99 Version 20 Document to update BA business rules to ASR Version 20. 2/10/99 19BA Document to provide BA - North and BA - South business rules.

Verizon ASR Business Rules v 27 Final

TABLE OF CONTENTS 1 DOCUMENT OVERVIEW ............................................................................................................. 1-1

1.1 DOCUMENT STRUCTURE ............................................................................................................. 1-1

2 ASR FORM COMPONENTS.......................................................................................................... 2-1

2.1 FORM TABLE DEFINITIONS.......................................................................................................... 2-1

3 ASR FORMS TABLES .................................................................................................................... 3-1

3.1 INTRODUCTION ........................................................................................................................... 3-1 3.1.1 Typographical Conventions ....................................................................................... 3-13-1

3.2 ASR - ACCESS SERVICE REQUEST FORM.................................................................................... 3-2 3.3 TRUNKING FORM ............................................................................................................... 3-223-233.4 TRANSPORT FORM ............................................................................................................. 3-343-353.5 ACI – ADDITIONAL CIRCUIT INFORMATION FORM ............................................................ 3-443-453.6 SALI - SERVICE ADDRESS LOCATION INFORMATION ........................................................ 3-503-513.7 TQ - TRANSLATION QUESTIONNAIRE ................................................................................ 3-563-573.8 C/NR - CLARIFICATION / NOTIFICATION REQUEST FORM.................................................. 3-673-683.9 CN - CONFIRMATION NOTICE FORM.................................................................................. 3-713-72

4 APPENDIX........................................................................................................................................ 4-1

4.1 APPENDIX A: TYPE OF CHANGE MATRIX.................................................................................... 4-1 4.1.1 Version 26 - 03/10/03................................................................................................. 4-14-1

4.2 APPENDIX B: CHANGES MATRIX ................................................................................................ 4-2 4.2.1 Summary of Changes ................................................................................................. 4-24-2

Verizon proprietary - subject to the restrictions on the notices page. Release Date: September 2003 Publication Date: July 2003

1.1 Document Structure Verizon ASR Business Rules v 27

Verizon proprietary - subject to the restrictions on the notices page. Release Date: September 2003 Publication Date: July 2003 1-1

1 Document Overview This Business Rules for Access Service Request (ASR) document describes the fields used for the communication of ASR business process requests between CLECs and Verizon. The document contains a description of the forms and fields details.

1.1 Document Structure Section 1, Document Overview describes document organization and the contents of each

Section. Section 2, ASR Forms Components, describes the components of a form’s data element. Section 3, ASR Forms Tables, contains tables that provide specific information regarding valid

field entries for ASR forms. Section 4, Appendices, contains tables that summarize and highlight business rules changes.

2.1 Form Table Definitions Verizon ASR Business Rules v 27 Final


2 ASR Form Components This section provides specific information regarding certain components of an Access Service Request as well as the definition of each form field.

2.1 Form Table Definitions The form tables contain eight (8) specific columns. Following is a description of each one of these columns: COLUMN 1 This column provides numbering of fields for easy reference. FIELD This column provides the field name abbreviation for each field on a particular form. DATA DESCRIPTION This column provides a full description of the field. LENGTH This column provides the maximum length of each field. TYPE This column provides specific data characteristics for each form field. Alpha/Numeric (A/N) means that there are no restrictions on the type of characters permitted for that element; Alpha (A) indicates that only alphabetic characters are permitted and Numeric (N) indicates that only numbers are permitted. USAGE This column provides the appropriate requirements for the population of each field within a particular request.

�� Required - Indicates the field must be populated �� Optional - Indicates the field may or may not be populated �� Conditional - Indicates the field is dependent upon the relationship to

another field as specified in the “Notes and Conditions” column

VALID ENTRIES This column provides specific entries that are valid for some fields. NOTES AND CONDITIONS This column provides the field definition and additional information regarding a field such as requirements for conditional fields.

3.1 Introduction Verizon ASR Business Rules v 27 Final

Verizon proprietary - subject to the restrictions on the notices page.

Release Date: September 2003 Publication Date: July 2003 3-1

3 ASR Forms Tables This section contains tables that describe the forms used when ordering Unbundled Network Elements from Verizon via Access Service Requests.

3.1 Introduction All forms have a unique set of fields. The tables in this section provide a detailed presentation of the fields associated with a form and the usage of those fields that will result in a service request.

References to New York (NY) include Connecticut.

3.1.1 Typographical Conventions Different typographical conventions are used throughout Section 3 and are as follows:

�� Gray shaded fields and valid entries are not applicable in Verizon when the UNE field on the ASR Form is “Y”. The use of shaded fields and/or valid entries is at your discretion.

�� Italic text indicates fields needed to permit implementation of local Verizon requirement. These fields must be provided as defined within the field Notes and Conditions. Verizon cannot process your service requests for unbundled network elements without you following this information.

3.2 ASR � Access Service Request Verizon ASR Business Rules v 27

3.2 ASR - Access Service Request Form Required form for all requests using ASR forms.

ASR Form - Specific Data Field Data Description Length Type Usage Valid Entries Notes And Conditions

1. CCNA Customer Carrier Name Abbreviation

3 A Required IAC CodeCUS = Casual customer

Identifies the COMMON LANGUAGE IAC code for the customer submitting the ASR and receiving the Confirmation Notice Form (CN) and the Clarification / Notification Form (C/NR). This code is established prior to the submission of the ASR.

When UNE field = “Y”, “CUS” is prohibited. 2. PON Purchase Order Number 16 A/N Required Identifies the customer’s unique purchase-order or requisition number that authorizes

the issuance of this request or supplement. The Purchase Order Number may be reused after two years from the due date of the original request.

3. VER Version Identification 2 A/N Required Identifies the customer’s version number. Any reissuance can use this entry to uniquely identify the form from any other version.

4. ASR NO Access Service Request Number

18 A/N Conditional Identifies the number that may be generated by the provider’s mechanized systems, pre-assigned to the customer by the provider, or manually assigned by the provider to identify a customer’s request for service.

Required when ASR NO is pre-assigned Required on all supplements when PON is not unique. Otherwise optional.

5. SPA Special Action Indicator 2 A/N Optional Position 1 is for customer use only Position 2 is for provider use only

An indicator used to identify an order being sampled for quality control purposes.

6. ICSC Interexchange CustomerService Center

4 A/N Required CP10 NE01 NJ01 NY01 PA01

Identifies the provider service center.

For UNEs in MA, ME, NH, RI & VT = NE01 For UNEs in NJ = NJ01 For UNEs in NY = NY01 For UNEs in DE & PA = PA01 For UNEs in DC, MD, WV & VA = CP10

7. CC Company Code 4 A/N Conditional Identifies the Exchange Carrier requesting local services. A four alpha/numeric character code structure for all Exchange Carriers in North America and certain U.S. territories maintained by NECA.

Required when ordering local interconnection services or unbundled network elements. Required when UNE field = “Y” or ordering local services. Otherwise prohibited. Use Operating Company Number (OCN)



Field Data Description Length Type Usage Valid Entries Notes And Conditions 8. UNE Unbundled Network

Elements 1 A Conditional Y = Ordering unbundled elements Identifies this request is ordering unbundled network elements for local service.

Optional when the CC field is populated and the first position of the REQTYP field is “M”, “S”, or “L”, otherwise prohibited

Required when ordering UNEs. See REQTYP field notes for UNEs. 9. D/TSENT Date and Time Sent 17 A/N Required Identifies the date and time that the Access Service Request is sent by the customer.

10. QA Quote Authorized 1 A Conditional Indicates that a quotation charge for special construction is authorized.

Optional when the ACT field is “N”, “C” or “T”, otherwise prohibited. 11. CBD Call Before Dispatch 2 N Conditional Identifies a customer request for the provider to call the LCON at a desired time

prior to “dispatch out” of a service technician for service installation or disconnect. Prohibited when the UNE field is “Y”, otherwise optional.

12. DDD Desired Due Date 10 A/N Required Identifies the customer’s desired due date. The actual due date may be different from that desired because of factors such as

availability of facilities and quantity, complexity, and impact on local service of circuits involved.

On disconnect requests, this date represents the date billing is to stop on the involved circuit(s) and can be no earlier than the date the request is received by the provider.

When different due dates are required, these dates are stipulated using a separate request for each desired due date. For example, a total of 50 circuits are desired and the customer wants them at a rate of 10 per day. Therefore, five ASR forms may be submitted stipulating this requirement.

13. FDT Frame Due Time 6 A/N Conditional Provides special handling instructions for the connection or disconnection of this request, such as, time of day when service should be disconnected.

Prohibited when the ACT field is “R”, Prohibited when the UNE field is “Y” Otherwise optional.

14. PROJECT Project Identification 16 A/N Conditional Identifies the project to which the request is to be associated.

Required when the ACT field is “N” or “D” and the CCVN field is populated, otherwise optional.

15. CNO Case Number 12 A/N Optional Identifies the quotation tracking number assigned by the provider in response to a provisioning arrangement inquiry, e.g., diversity.

16. PPTD Project Plant Test Date 10 A/N Conditional U.S. Standard Metric Format

Identifies the pre-negotiated plant test date for the start of overall testing of the service requested on this ASR.

Optional when the PROJECT field is populated, otherwise prohibited. 17. PFPTD Project Facility Plant Test

Date 10 A/N Conditional U.S. Standard

Metric Format Identifies the pre-negotiated facility plant test date for the start of overall testing of the switched access facilities being requested on this ASR.

Optional when the first position of the REQTYP field is not “R” and the PROJECT field is populated, otherwise prohibited.



Field Data Description Length Type Usage Valid Entries Notes And Conditions 18. NOR Number of Requests 4 N Conditional Identifies both specific ASR and total quantity of Access Service Requests within a

group of ASRs being ordered. In order to facilitate the process, at least the first related ASR should describe or list

the total RPONs used when RPON is not the same for all such requests. For example, six ASRs are to be associated and individual PONs and RPONs are being used.

All service types must be identical for such grouping of like orders.

Required when the TQ field is populated and a total of two or more ASRs are associated with the translation questionnaire, otherwise optional.

19. LUP Intrastate IntraLATAUsage Percentage

3 N Conditional 1 to 100 Identifies the percent Intrastate IntraLATA usage for use with IntraLATA competition. This field may apply whenever PIU is less than 100.

Prohibited when the PIU field is not populated or is “100”. Prohibited when the first position of the REQTYP field is or “R”. Otherwise optional.

20. BSA Basic Serving Arrangement

1 A Conditional Y = unbundled ordering Identifies the requirement for a Basic Serving Arrangement (BSA), which is the minimum necessary transport arrangement for the delivery of the unbundled network features and functions, or for a Basic Service Element (BSE) associated with a Basic Serving Arrangement.

Prohibited when the CC or WST field is populated, otherwise optional.



Field Data Description Length Type Usage Valid Entries Notes And Conditions 21. REQTYP Requisition Type and

Status 2 A Required 1st character (see notes for use)

M = Trunking (FG B, C, D. SAC NXX, Wireless and Local)

L = CCS Link or Unbundled STP Port S = Special Access, Full Time / Part

Time Television or Program Audio, DNAL Switched Access Facility, Unbundled Dedicated Transport, Unbundled Multiplexer

A = Switched Access Feature Group A E = End User Special Access, DNAL,

Part Time/Full Time Television or Program Audio

R = Ring V = Broadband Services W = WATS Access Lines X = Broadband End User Services

2nd character (Service Request) A = Manual/mechanized C = Manual/mechanized F = Verbal H = Verbal G = Access Service Request follow up to

verbal 2nd character (Firm Order)

D = Manual/mechanized K = Verbal J = Access Service Request follow up to

verbal

Identifies the type of service being requested and the status of the request. The first character of REQTYP specifies the type of service/element. The second character of REQTYP specifies the status of the request in the four step order process.

When UNE field = “Y”, first position entries below are the only valid entries and represent: “L” = SS7 Unbundled STP Port “M” = Dedicated Trunk Port and Extended Dedicated Trunk Port (EDTP) Type 1*

& Type 2* “S” = Unbundled Interoffice (IOF) Transport, Unbundled Multiplexer (Mux), Unbundled DS1, DS3, OC3 and OC12 Loops, DS1 and DS3 Multiplexed Expanded Extended Loop (EEL), and Voice Grade, DS0, DS1 & DS3 Expanded Extended Loops, Unbundled Dark Fiber, Dedicated Transit Service (DTS), Unbundled Feeder Sub-loop Element (UFSE)

22. ACT Activity 1 A Required N = New Installation or increase in capacity D = Disconnection or decrease in capacity M = Inside move of the physical

termination within a building T = Outside move of end user location C = Change or modification to an existing

service. R = Record Activity for ordering

administrative changes.

Identifies the activity involved in this service request.

“C” may not be used to migrate to or from Unbundled Network Elements. In DC, DE, MA, MD, ME, NH, NJ, NY, PA, RI, VA, VT & WV for UNE IOF and

DTS, valid entries are “N”, “D”, “C” and “R”. “M” and “T” are not applicable. In DC, DE, MA, MD, ME, NH, NJ, NY, PA, RI, VA, VT and WV for UNE DS1, DS3,

OC3 and OC12 Loops and Voice Grade, DS0, DS1 & DS3 EEL Loops, valid entries are “N”, “D”, “C”, “T” and “R”. “M” is not applicable (VZ is not responsible for inside wire).

“T” is only associated with Loops or EEL Loops combined with EEL transport. For UNE Dark Fiber, valid entries are “N”, “C” and “D”. "C" may only be used

associated with “parallel provisioning” For UFSE, valid entries are “N” and “D”. “C”, “M” and “T” are not applicable.



Field Data Description Length Type Usage Valid Entries Notes And Conditions 23 ACTI Activity Indicator 1 A Conditional A = Trunk Group Augment without

translation changes B = Trunk Group Augment with

translation changes C = New Trunk Group D = Partial Trunk Group disconnect E = Full Trunk Group Disconnect and

Traffic Re-route F = Full Trunk Group Disconnect and No

Traffic Re-route

Activity Indicator will allow the customer to specify whether the order is an augment or a new trunk group or a partial or full disconnect Required when the first position of the REQTYP field is “M” and the ACT field is “N”. Valid ACTI values must be “A”, “B”, or “C”. Required when the first position pf the REQTYP field is “M” and the ACT field id “D”. Valid ACTI value must be “D”, “E”, or “F”.

24 QSA Quantity Service Address Location Information

2 N Conditional Identifies the total number of Service Address Location Information Forms being sent by the customer.

Required when the ACT field is “N” or “T” and the first position of the REQYTP field is “S”, “E”, “W”, “V” or “X” and the first position of any PRILOC / SECLOC field is an “E”.

Required when ACT = “N” or “T” and 1st position of REQYTP = “S”, ordering UNE DS1, DS3, OC3 and OC12 Loops, Voice Grade, DS0, DS1 and DS3 EEL Loops in combination with EEL transport or UNE Dark Fiber Loops*.

Required when the ACT field is “N” or “T” and the 1st position of the REQTYP field is “R” and the 1st position of the PRILOC field is an “E” and the SPOT (PRI) field is not a CLLI Code on the RING or ARI Form.

Required when the ACT field is “N” or “T” and the 1st position of the REQTYP field is “A” and the NSL field on the FGA Form is populated.

Prohibited when the first position of the REQTYP field is “M”: or Prohibited when 1st position of REQTYP = “E”, “W”, “V”, “X” or “R” and UNE

field is populated. Otherwise optional. * where available

25 WST Wireless Service Type 1 A Conditional Identifies the type of wireless service being requested.

Prohibited when the first position of the REQTYP field is “E”,“S”, “W”, “L”, “R”, “V” or “X”, otherwise optional.

Prohibited when the UNE field is populated. 26. LATA Local Access Transport

Area 3 N Optional Identifies the geographical area for service being provided.



Field Data Description Length Type Usage Valid Entries Notes And Conditions 27. RTR Response Type Requested 2 A/N Required D = Send DOC only

F = Send FOC only S = Send FOC and DLR; CDLRD waived N = No response requested 1-10 = Send FOC and DLR; CDLRD

required

Identifies the type of confirmation response requested by the customer.

“D” is prohibited when the first position of the REQTYP field is “E”, “R” or “W”, or the ASC-EC field is populated, or the second position of the TQ field is “N” or “X”.

“D” is prohibited when the ACT field is “M” or “R”. “S” is prohibited when the ACT field is “M” or “R”. “N” = no response requested. A numeric entry indicates the number of working days that the customer requires to

confirm the Design Layout Report (DLR) and will be added to the overall interval. “1-10” prohibited when the ACT field is “M” or “R”.

“D” is prohibited when the UNE field is “Y”.



Field Data Description Length Type Usage Valid Entries Notes And Conditions 28. SUP Supplement Type 1 N Conditional 1 = Cancel (indicates that the pending order

is to cancelled in its entirety) 2 = New Due Date (indicates that the

pending order requires only a change of due date)

3 = Other (any other change to a confirmed request)

4 = Correction (indicates that this request is being issued to correct a previous request for which a firm order confirmation has not been received)

A supplement is any new iteration of an ASR. The entry in the SUP field identifies the reason for which the supplement is being issued. For valid entry of “1”:

If the pending order was already completed as ordered, a separate request must be sent instead of the supplement.

Valid for Service Requests and Firm Orders whether or not they have been through the confirmation phase.

For valid entry of “2”: Indicates the pending order requires a change of due date. The new due date is

specified in the DDD field, desired due date. The new desired due date can be no more than 30 calendar days greater than the original due date. If the request is to establish a due date sooner than the current due date then the EXP field must contain a “Y” when less than the standard interval.

Valid for requests which have a Firm Order Confirmation or a Design and Order Confirmation.

For valid entry of “3”: This may affect the previously agreed upon due date. Partial cancellations should also be entered with a “3” in the SUP field. A request for a change in Due Date in conjunction with other changes to a pending

order should be submitted with a “3” in the SUP field. The new desired due date can be no more than 30 calendar days greater than the original due date. If the request is to establish a due date sooner than the current due date then the EXP field must contain a “Y” when less than the standard interval.

This entry is also to be used for supplements that are a result of provider changes after the Firm Order Confirmation (FOC) or a Design and Order Confirmation (DOC).

Valid for requests which have a Firm Order Confirmation or a Design and Order Confirmation.

Requires an entry in the REMARKS field to identify the changes. The remainder of the request must be identical to the original request issued.

For valid entry of “4”: Valid for Firm Orders that have not been through the confirmation phase and

Service Requests that may or may not have been confirmed. Requires an entry in the REMARKS field to identify the changes. The remainder of

the request must be identical to the original request issued.

Prohibited on initial requests. Prohibited when changing a service request to a firm order. Prohibited when changing service type which results in a change to first character of

the REQTYP field. Otherwise required



Field Data Description Length Type Usage Valid Entries Notes And Conditions 29. AFO Additional Forms 4 A Conditional 1st position

Y = Additional Circuit Information (ACI) Form

2nd position Y = Testing Service Request (TSR) Form

3rd position Y = Network Assignment Information

(NAI) Form 4th position

Y = End Office Detail (EOD) Form

Indicates which additional forms are being submitted with this request.

Required when the associated request form(s) is applicable and sent. Position 1 entry required for a supplement canceling all circuits contained on the

initial ACI records; each individual circuit record on the supplement would carry a CKTACT = “K”.

Position 2 entry is prohibited when the UNE field is populated, otherwise optional for supplement of ASR sent with a TSR. Absence of entry in position 2 on any supplement indicates Testing Services are no longer requested.

When position 3 is populated and the first position of the REQTYP field is not equal to “R” and the QTY field is greater than one (1), character position 1 is required.

Otherwise prohibited.

Position 1 is required when the associated request form is applicable and sent. Positions 2, 3 and 4 are prohibited when UNE field =”Y”.

30. QNAI Quantity Network Assignment Information

2 N Conditional Identifies the total number of NAI Circuit Detail sections sent by the customer.

Required when the third position of the AFO field is “Y”, otherwise prohibited. 31 TQ Translation Questionnaire

Request 2 A/N Conditional 1st position

A = no TQ attached S = SAC only B = FGB Translations U = FGB Translations and SAC D = FGD translations T = FGD translations and SAC L = Local Translations C = Code (NPA/NXX/X) Translation

Routing Only M = Local translations and Code

Translation Routing W = Wireless translation X = Wireless translations and Code

Translation Routing 1-9 = TQ on file

2nd position Y = Trunking Form (trunk activity) N = No Trunking Form X = Trunking Form (no trunk activity) E = STP Translation changes

Indicates that a translation questionnaire is being submitted. When the first position of TQ is “A”, the ASR which has the TQ Form attached will

be identified in the RPON field. When the first position of TQ is “L”, “M”, “W”, “X” or “C”, entries in the CC and /

or WST fields are required. When the first position of TQ is not “L”, “M”, “W”, “X” or “C”, entries in the CC

and/or WST field are prohibited. The second position of “X” indicates a Trunking Form is provided for system

requirements rather than provisioning purposes. When the ACT field is “N” or “D”, a second position of “N” or “X” is prohibited. When first position of TQ field is “E” the second position must be an “X” When first position of TQ field is “E” the first position of REQTYP field must be an

“L” and ACT field must be “C”. Required when the ACT field is “N”, “C”, “D” or “R” and translations are affected, otherwise prohibited.

32. EXP Expedite 1 A Conditional Y = Expedite charges authorized Indicates that expedited treatment is requested and any charges generated in provisioning this request (e.g., additional engineering charges or labor charges if applicable) will be accepted.

Required when desired due date is less than the standard interval for the provisioning of the service and the ACT field is not “D”

Prohibited when the ACT field is “D”, except outward WATS service. Otherwise optional.



Field Data Description Length Type Usage Valid Entries Notes And Conditions 33. AENG Additional Engineering 1 N Conditional 1 = overtime engineering

2 = engineering connections when more than one provider is providing the access service.

3 = overtime engineering and engineering with other providers

4 = other engineering

Indicates that if additional engineering is required, an estimate of the charges is to be forwarded to the initiator of the request.

* A valid entry of “4”, other engineering, includes authorization to Verizon to change the UNE request to a Special Access Service request when Verizon encounters a no facility condition during the facility check for the requested UNE, i.e., DS1 or DS3 Loop, DS1 or DS3 EEL Loop or DS1 or DS3 Interoffice Transport. No estimate of charges will be forwarded to the initiator.

Optional when the ACT field is “N”, “C”, “M” or “T”, otherwise prohibited. * where available

34. ALBR Additional Labor 1 N Conditional 1 = Overtime installation 2 = Testing with other providers 3 = Other labor 4 = Overtime installation and testing with

other providers 5 = Overtime and other labor 6 = Testing with other providers and other

labor 7 = Overtime installation, testing with other

providers and other labor

Indicates that additional labor is requested and charges will be accepted in conjunction with this Access Service Request, (e.g., Sunday or out of normal business hour installation is being requested).

Optional when the ACT field is “N”, “C”, “M” or “T”, otherwise prohibited.

35. AGAUTH Agency AuthorizationStatus

1 A Conditional E = authorization previously provided N = new authorization B = blanket authorization was previously

provided

Indicates that a customer is acting as another customer’s agent.

Required when the customer is acting as a customer agent, otherwise optional.

Required when UNE field = “Y” and ordering DS1, DS3, OC3 or OC12 Loops or Voice Grade, DS0, DS1 or DS3 EEL Loops in combination with EEL.

36. DATED Date of Agency Authorization

10 A/N Conditional U.S. StandardMetric Format

Identifies the date appearing on the agency authorization which was previously submitted to the provider.

Required when the AGAUTH field is “E” or “B”, otherwise optional. 37. CUST Customer Name 25 A/N Conditional Identifies the name of the customer that originated this request when that customer

will only have a limited amount of exchange access and has not been assigned a CCNA, (Customer Carrier Name Abbreviation).

Required when the CCNA field is “CUS”, otherwise optional. 38. LA Lease Arrangement 1 A Conditional Y = Yes Indicates there is a lease arrangement associated with the ACTL and ACNA

identified.

Required when a lease arrangement exists, otherwise prohibited.

When there is a lease arrangement, VZ requires the name of the transport owner representative in the LANM field.

39. LADATED Date of Lease Arrangement

10 A/N Conditional U.S. StandardMetric Format

Identifies the date appearing on the lease arrangement.

Required when the LANM field is populated, otherwise prohibited. 40 LANM Lease Authorization Name 15 A/N Conditional Indicates the name of the transport owner (lessor) representative who signed the

lease arrangement.

Optional when the LA field = “Y”, otherwise prohibited. Required when the LA field = “Y”, otherwise prohibited



Field Data Description Length Type Usage Valid Entries Notes And Conditions 41. FBA Facility Billing

Arrangement 4 A Conditional 1st position

A = Shared Network B = Lease Back C = Split Billing - All elements D = Split Billing

2nd through 4th Positions Y = Indicates the requirement of split

billing on the respective element EF = Entrance facility DT = Direct Transport MUX = Multiplexing

Indicates a special arrangement has been negotiated between the host customer of a higher level service and the subsequent customer of the lower level service.

Required when the ACT field is “N”, “C” or “T” and the ACNA field is different from the ACNA associated with the facility (CFA and/or SCFA) and the UNE and CC fields are not populated.

Optional when the ACT field is “R” and the ACNA field is different from the ACNA associated with the facility (CFA and/or SCFA) and the UNE and CC fields are not populated.


42. FNI Fiber Network Identification

13 A/N Conditional Identifies all services associated with a particular fiber based network. Also may identify customer ring and associated ring services.

Required when the first position of the REQTYP field is “R” and the UNE field is not populated.

Required for DS1/DS3 within a Fiber Network and the UNE field is not populated. Required for services riding a dedicated ring and the UNE field is not populated. Otherwise prohibited.

In NY, FNI data maps to service order FID SNID. SNID requires a minimum of 5 and a maximum of 6 characters and is only retained in CABS.

When the UNE field = “Y” in NY, the FNI field is not available at this time. 43. CFNI Customer Fiber Network

ID 20 A/N Optional Identifies the customer’s circuit identification code for the ring being requested.

44. PSL Primary Service Location 11 A/N Conditional 11 character CLLI Identifies the primary service location when the terminating and the originating points are not the ACTL.

When the PSLI field is populated with an “A”, the PSL indicates the VZ switch originating traffic.

Required when the CC and UNE are populated and ACTL is not populated, otherwise optional. Required for EDTP Type 2 *. * where available

45. PSLI Primary Service Location Indicator

1 A Conditional A = Provider Switch B = Provider Central Office C = Customer Physical Collocation D = Customer Virtual Collocation E = Provider Assigned CLLI Code

Identifies the use of the PSL field.

Required when the PSL field is populated, otherwise prohibited.

46. CKR Customer CircuitReference

53 A/N Optional Identifies the circuit number or range of circuit numbers used by the customer.



Field Data Description Length Type Usage Valid Entries Notes And Conditions 47. UNIT Unit Identification 1 A Conditional C = Number of lines, trunks, facilities,

circuits, CCS links or ring segments B = Number of BHMC P = Percent market share

Identifies whether the Quantity (QTY) field contains number of circuits, ring segments, Busy Hour Minutes of Capacity (BHMC) for switched access services or percent of market share.

Required when the first position of the REQTYP field is “M”, the ACT field is “N”, “C”, “D” and the second position of the TQ field is not “N” or “X” and the EOD USE field on EOD Form is not “A”.

Required when the first position of the REQTYP field is “A” or “L” and the ACT field is “N”, “C” or “D”.

Prohibited when the second position of the TQ field is “N” or “X” or the EOD USE field on EOD Form = “A”.

Otherwise optional.

When UNE field = “Y”, entry of “C” is required. 48. PIU Percentage of Interstate

Usage 3 A/N Conditional 000 or 100 (see Notes) Identifies the expected Interstate Usage for the access service on this request. Both

Interstate and Intrastate may be ordered on a single Access Service Request by specifying the applicable percent of Interstate usage. However, two Access Service Requests may be related to one another through entry RPON (Related Purchase Order Number).

Required for services other than FGC and FGD when the ACT field is “N”, the WST field is not populated”.

Required when the first position of the REQTYP field is “S”, “E”, “V”, “X” or “W” and the ACT field is “C”, “M”, “T” or “R”.

Prohibited when the first position of the REQTYP field is “Q”. Otherwise optional.

When UNE field = “Y” and ACT = “N”, “C”, “M”, “T”, or “R” PIU entry of “000” is required, except in the DC LATA where the PIU must = “100”.

49. PLU Percent Local Usage 3 A/N Conditional 001 to 100 LOF

Identifies the percent of local usage associated with trunk groups carrying local traffic between a LEC and a CLEC.

Required when the CC field is populated and the first position of the REQTYP field is “M”.

Optional when CC field is populated and the first position of the REQTYP field is “S” or “L”.

Otherwise prohibited. 50 LTP Local Transport 4 A/N Conditional 1st position

“N” see notes Identifies the switched access local transport elements affected by this request.

Required when the first position of the REQTYP field is “M” or “A” and the ACT field is “N”, “C” or “D”.

Required for switched access facilities when the ACT field is “N”, “C” or “D”. Optional when the first position of the REQTYP field is “L” and the ACT field is

“N”, “C” or “D”. Otherwise prohibited.

When UNE field = “Y” and 1st position REQTYP = “M”, LTP entry must be “N”. When UNE field = “Y” and REQTYP first position = “L” or “S”, LTP is prohibited.



Field Data Description Length Type Usage Valid Entries Notes And Conditions 51. ECCKT Exchange Company

Circuit ID 53 A/N Conditional COMMON LANGUAGE Special Service

Circuit Codes (CLCI S/S Codes) – Telephone Number Format

COMMON LANGUAGE Special Service Circuit Codes (CLCI S/S Codes)

COMMON LANGUAGE Message Trunk Circuit Codes (CLCI MSG Codes)

COMMON LANGUAGE Facility Codes (CLFI Codes)

Identifies the provider circuit ID or multiple circuit Ids. The provider assigning this circuit identifier determines the content of this field in

accordance with COMMON LANGUAGE standards maintained by Telcordia Technologies.

When a component within the format is purposely omitted, the component should still be delimited and compressed to eliminate any spaces.

All components within the ECCKT should be delimited by either virgules or periods. If all positions in a component within the ECCKT are not populated, the component

should be compressed to eliminate any spaces. When disconnecting all circuits in a given account, “ALL” should be entered in this

field, the BAN field populated, and the ACT field should contain a “D”. The format and structure of the field is defined by ANSI standards.

Required when the ACT field is “C”, “D”, “M” or “T” and the first position of the TQ field is not “S”.

Required when the ACT field is “N” and the first position of the TQ field is not “S”, the CCVN field is populated

Required when the ACT field is “N” or “R”, the first position of the TQ field is “S”, an ECCKT has not been previously provided to the customer Otherwise optional.

52. QTY Quantity 7 N Conditional Identifies the quantity of circuits, ring segments, BHMCs, or the percent of market share, involved in this service request.

Required when the ACT field is “N”, “C”, “D”, “M” or “T”, the second position of the TQ field is not “N” or “X”, the EOD USE on EOD Form is not “A”

Prohibited when the second position of the TQ field is “N” or “X”. Prohibited when the EOD USE on the EOD Form is “A” Otherwise optional.

When UNE field = “Y” and 1st position REQTYP = “M” and ACT = “N” or “C”, QTY entry is required and must reflect a number of DS0 trunks.

When UNE field = “Y” and 1st position REQTYP = “S” and AFO first position =“Y”, QTY entry is required and must equal total ACI records plus 1.

53. BAN Billing Account Number 12 A/N Required Valid UNE BAN N = New Billing Account Number

requested E = Existing NB = Multi-EC Nonbilling provider

Identifies the billing account to which the recurring and non-recurring charges for this request will be billed.

“E” or “NB” is prohibited when UNE field = “Y”.

54. ASG Access Service Group 6 A/N Optional Identifies the access service group assigned to a particular circuit or group of circuits. This number appears on the Customer Service Record (the billing service charge

details) which was forwarded to the customer when the service was installed, or, when there was a change to the bill resulting from service order activity. The ASG may also be provided on the Confirmation Notice Form (CN) by the provider.

If a new ASG is being requested then the only valid entry is “N”.



Field Data Description Length Type Usage Valid Entries Notes And Conditions 55. BIC Exchange Company

Initiated Change 1 N Conditional 1 = Trunk Group Service Request (TGSR)

2 = Engineering Change 3 = ICSC Record Change 4 = Facility Transfer 5 = Network Reconfiguration 6 = Maintenance Consideration 7 = Other

Indicates the type of provider initiated change requested. BIC entries are provided to the customer by the provider. This field is valid on an ASR Form that responds to a provider initiated change.

Prohibited when the ACT field is “M”, otherwise optional.

56. BIC TEL BIC Telephone Number 10 N Conditional Identifies the telephone number of the provider representative responsible for the BIC.

Required when the BIC ID field is populated, otherwise prohibited. 57. BIC ID BIC Identifier 12 A/N Conditional Identifies the provider contact, work group or a serial type log, etc., associated with

the BIC.

Required when the BIC field is populated, otherwise prohibited. 58. TSC Two Six Code 8 A/N Conditional Identifies a code assigned to a trunk group or a CCS Link Set.

The code set is unique to each established trunk group or CCS Link Set and is provided to the customer on the Firm Order Confirmation or Design and Order Confirmation. The TSC entry may then be populated by the customer when ordering changes, additions or deletions to an existing trunk group or CCS Link Set.

Required when the LA field is “Y” for established trunk side service or CCS Link Set.

Optional when the LA field is not populated for established trunk side service or CCS Link Set.


Required when adding capacity to an existing trunk group using UNE dedicated trunk port(s).

59. WSTN Wireless Screening Telephone Number

10 A/N Conditional Telephone Number format NPA-NXX-XXXX

Identifies the telephone number used for billing or translation purposes.

Prohibited when the UNE field is populated.



Field Data Description Length Type Usage Valid Entries Notes And Conditions 60 ACTL Access Customer Terminal

Location 11 A/N Conditional Valid CLLI code Identifies the CLLI code of the customer facility terminal location. The CLLI code

will have been previously assigned. Prohibited when the first position of the REQTYP field is “E” or “X”. Prohibited when the PRILOC field on RING Form is populated. Prohibited when PSLI field is “A”. Optional when the second position of the TQ field is “N”. “X”. Optional when the first position of the REQTYP field is “W” and the BAN field is

not “N”. Otherwise required. When UNE field = “Y” and the 1st position REQTYP = “L”, the 11 character CLLI

must represent a central office collocation arrangement*. When UNE field = “Y” and the 1st position REQTYP = “M”, the 11 character CLLI

must represent a central office collocation arrangement*, except when ordering EDTP**.

When UNE field = “Y”, the 1st position REQTYP = “S” and the NC on the Transport Form indicates multiplexing, the 11 character CLLI must represent a central office collocation arrangement*, except when ordering EEL or EDTP** transport.

In DC, DE, MD, ME, NH, NJ, NY, PA, RI, VA, WV & VT, when UNE field = “Y”, the 1st position REQTYP = “S” and the NC on the Transport Form indicates Dark Fiber, the 11 character CLLI must represent a central office collocation arrangement*.

In MA, when UNE field = “Y”, the 1st position REQTYP = “S” and the NC on the Transport Form indicates Dark Fiber and the dark fiber terminates in a VZ central office, the 11 character CLLI must represent a central office collocation arrangement*.

When ordering DS1, DS3, OC3 or OC12 Loops not combined with EEL transport, and UNE field = “Y”, the 11 character CLLI must represent a central office collocation arrangement*.

When the UNE field = “Y” and ordering UFSE, the 11 character CLLI must represent a central office collocation arrangement.

* � In MA, ME, NH, NY, RI & VT, central office collocation arrangement 11 character CLLI must have a “H” in the 9th character position.

�� In DC, DE, MD, NJ, PA, & WV, central office collocation arrangement 11 character CLLI must have a “H” in the 9th character position and a “C”, “G”, “P”, “R” or “V” in the 10th character position.

�� In former Bell Atlantic region of VA, central office collocation arrangement 11 character CLLI must have a “H” in the 9th character position and a “C”, “G”, “P”, “R” or “V” in the 10th character position.

** where available



Field Data Description Length Type Usage Valid Entries Notes And Conditions 61. PBT Pot Bay Type 1 A Conditional A = Pot bay is located in the common area

– ILEC provides, installs and maintains equipment.

B = Pot bay is located in the common area – Collocator provides equipment and ILEC installs and maintains equipment.

C = Pot Bay is located inside the cage – CLEC provides, installs and maintains equipment.

Identifies the type of collocation arrangement for this service request. A Pot Bay is the physical demarcation point between a physical collocation

arrangement and the ILECs equipment.

Optional when the first position of the REQTYP field is “M” or “S” and the ACT field is “N”, “C” or “D”, otherwise prohibited.

62. AI Additional Point of Termination Indicator

1 A Conditional C = CLLI code N = Narrative

Identifies whether the FEOD field contains a CLLI code or a narrative.

Required when the APOT field is populated, otherwise prohibited. 63. APOT Additional Point of

Termination 11 A/N Conditional Valid CLLI code Further identifies the physical ACTL Point of Termination.

Required when the ACTL field does not identify the specific physical termination point of the access service.

Otherwise optional. 64. RORD Related Order Number 17 A/N Conditional Identifies a provider’s related order number.

Required when the provider has pre-assigned a related order number, otherwise prohibited.

65. RPON Related Purchase Order Number

16 A/N Conditional Identifies the PON of a related Access Service Request. The RPON field may be used for relating both “N” and “D” Access Service Requests

that change a location (different premises) of an existing service. The RPON field may be used to relate intrastate and interstate requests for a mixed

group such as for Feature Group A service when ordered using separate Access Service Requests or relating requests with firm orders.

When the CCVN field is populated, the RPON field for the disconnect ASR must contain the new connect ASR PON. The RPON field of the new connect ASR may contain the disconnect ASR PON.

When the TQ field is “A”, the RPON field will contain the PON of the ASR which has the TQ attached (Master ASR). See ATIS/OBF-ASR-019, General Section. This rule takes precedence over any other RPON value.

Required when the ACT field is “D” and the CCVN field is populated. Required when the NOR field is populated. Required when the first position of the TQ field is “A”. Required when the ATN field on the Transport or EUSA Form is “N”. Required when the REL TSC field on the Trunking Form is “N”. Otherwise optional.

66. CCVN Coordinated Conversion 6 A Conditional IAC Code(s) Identifies the request as being a coordinated conversion reusing a portion of an existing access service configuration for the provisioning of a new access service. Two access service requests (one new connect and one disconnect) are required. When this field is populated on an ASR with “N” activity, the ECCKT field must be

populated with the circuit identification(s) of the former customer’s access service. When a Coordinated Conversion is applicable, it is strongly recommended that both

requests (N and D) are fully cross- referenced using CCVN, PON and RPON fields which will allow for a more efficient transition of the services.

Optional when the ACT field is “N” or “D”, otherwise prohibited.



Field Data Description Length Type Usage Valid Entries Notes And Conditions 67. ASCEC Access Service

Coordination - Exchange Company

4 A/N Conditional This field identifies the ICSC code of the Access Service Coordination - Exchange Company (ASC-EC) whenever an access service passes through more than one provider territory.

Required when multiple providers are involved in providing access service, otherwise prohibited.

68. TSP TelecommunicationService Priority

12 A/N Optional Nine Char TSP Control Identifier. One Character Provisional Priority Level

(E, 0-5) One Digit Restoration Priority Level (0-5)

Indicates the provisioning and restoration priority as defined under the TSP Service Vendor Handbook. These codes are assigned by the TSP Program Office. A TSP code ending in “00” indicates “revocation”, the removal of a previously

assigned TSP code. 69. SAN Subscriber Authorization

Number 30 A/N Optional Identifies a number equivalent to the End User Purchase Order Number.

This may, at the option of the customer, be a requirement when providing service to some governmental agencies.

This field may be used in conjunction with the SBILLNM field. 70 AFG Agency of the Federal

Government 1 A Optional Y = Yes Identifies that this service is provided to an agency of the Federal Government.

71. SPEC Service and Product Enhancement Code

5-7 A/N Conditional Positions 1-7 = any alpha character except “I” or any numeric character except “0”

When ordering UNEs: “UNBALL” “UNB1OT” “UNB1DP” “UNB1D2” “UNBFSE” see Notes

Identifies a specific product or service offering. SPEC may be applicable for circuit level features and options other than those

already identified by the Network Channel (NC) and Network Channel Interface (NCI) codes.

Required when UNE field = “Y” and first position of the REQTYP field entry is “L”, “M” or “S”.

UNE SPECs and configurations are: UNBALL = UNE DS1, DS3, OC3 and OC12 Loops (non-EEL), UNE IOF, UNE

Dark Fiber, UNE Mux and DTS UNB1OT = All Expanded Extended Loop (EEL) Products (EEL Backbone, EEL

Loops (DS1 and DS3) and EEL M-Loops (Voice Grade, DS0, and DS1) UNB1DP = Extended Dedicated Trunk Port (EDTP) Type 1* UNB1D2 = Extended Dedicated Trunk Port (EDTP) Type 2* UNBFSE = Unbundled Feeder Sub-loop Element

* where available 72. REMARKS Remarks 186 A/N Conditional Identifies a free flowing field which can be used to expand upon and clarify other

data on this form.

Required when the ACT field is “N” and the request is for IOF Dark Fiber or Loop Dark Fiber.

Required when SUP field = “3” or “4”. Otherwise optional.

73. BILLNM Billing Name 25 A/N Conditional Identifies the name of the person, office, or company to whom the customer has designated that the bill be sent.

Required when the BAN field is “N”. Required when the CCNA field is “CUS”. Required when the ACNA field is “ZZZ”. Otherwise optional.



Field Data Description Length Type Usage Valid Entries Notes And Conditions 74. SBILLNM Secondary Billing Name 25 A/N Optional Identifies the name of a department or group within the designated BILLNM entry.

May also be used to specify the end user customer as identified in field entry “SAN”, subscriber Authorization Number used by the customer in conjunction with billing its customers.

75. ACNA Access Customer Name Abbreviation

3 A Required IAC CodeZZZ = Casual customer or end user billing

Identifies the COMMON LANGUAGE IAC code of the customer who should receive the bill for the ordered service.

When UNE field = “Y”, “ZZZ” is prohibited. 76. TE Tax Exemption 1 A Conditional Entry - Exempt from

F - Federal S - State/Province C - County or Local M - Municipal A - F & S B - F & C K - F & M D - F & S & C E - F & S & M G - F & S & C & M H - S & C I - S & M J - C & M L - Letter on File N - Non Exempt P - S & C & M

Indicates that the customer has submitted a tax exemption form to the provider.

Required when the ACT field is “N” and the BAN field is “N”, otherwise optional.

77. EBP Extended Billing Plan 6 A/N Conditional Identifies the request for establishing or removing installment billing of non-recurring charges that may be offered by a provider.

Prohibited when the UNE field is “Y”, otherwise optional. 78. STREET Street Address (BILL) 25 A/N Conditional Identifies the street of the billing address associated with the billing name.

Required when the BAN field is “N”, otherwise optional. 79. FLOOR Floor (BILL) 3 A/N Optional Identifies the floor for the billing address with the billing name. 80. ROOM Room (BILL) 6 A/N Optional Identifies the room for the billing address associated with the billing name. 81. CITY City (Bill) 25 A/N Conditional Identifies the city, village, township, etc. of the billing address associated with the

billing name.

Required when the BAN field is “N”, otherwise optional. 82. STATE State/Province (BILL) 2 A Conditional Identifies the two character postal code for the state/province of the billing address

associated with the billing name.

Required when the BAN field is “N”, otherwise optional. 83. ZIP CODE Zip Code (BILL) 12 A/N Conditional Identifies the zip code or postal code of the billing address associated with the billing

name.

Required when the BAN field is “N”, otherwise optional. 84. BILLCON Billing Contact 15 A/N Conditional Identifies the name of the person or office to be contacted on billing matters.

Required when the BAN field is “N”, otherwise optional.



Field Data Description Length Type Usage Valid Entries Notes And Conditions 85. TEL NO Telephone Number (BILL) 15 N Conditional Identifies the telephone number of the billing contact.

Required when the BAN field is “N”, otherwise optional. 86. VTA Variable Term Agreement 17 A/N Conditional Identifies the duration, identifying USOC, contract date or contract identification

number of any variable term agreement that may be offered by a provider.

When UNE field = “Y”, VTA is prohibited, otherwise optional. 87. VCVTA Virtual Connection

Variable Term Agreement 17 A/N Conditional Identifies the duration, identifying USOC, contract date of contract identification

number of any variable term agreement that may be offered by a provider for a virtual connection.

Optional, when the first position of the REQTYP field on the ASR Form is a “V” or “X”, and the VCVTA field on the VC Form is not populated; otherwise prohibited.

When UNE field = “Y”, VCVTA is prohibited. 88. IWBAN Inside Wire Billing

Account Number 16 A/N Conditional Identifies the previously assigned Billing Account Number for charges associated

with inside wire.

Required when GETO on service specific form = “A”, “E”, “S”, “T”, “U”, “V”, “W”, “Y” or “Z”, otherwise optional.

When UNE field = “Y”, IWBAN is prohibited. 89 INIT Initiator 15 A/N Required Identifies the customer employee who originated this request.

This is the person who should be contacted if there are any questions regarding this request. Any authorizations of charges, changes or waiving the Confirming Design Layout Report (CDLR) are the responsibility of this person.

90 TEL NO Telephone Number (INIT) 15 N Required Identifies the telephone number of the customer employee who initiated this request. 91 INIT FAX NO Initiator Facsimile Number 10 N Optional Identifies the fax number of the initiator. 92 INIT EMAIL Initiator Electronic Mail

Address 60 A/N Optional Identifies the electronic mail address of the initiator.

If INIT EMAIL is provided, Verizon will initiate an email notification(s) to advise that a C/NR Form has been sent to the customer.

93 STREET Initiator Address Street 25 A/N Required Identifies the initiator’s street address. 94 FLOOR Floor (INIT) 3 A/N Optional Identifies the floor of the initiator’s address. 95 ROOM Room (INIT) 6 A/N Optional Identifies the room of the initiator’s address. 96 CITY City (INIT) 25 A/N Required Identifies the city, village, township, etc. of the initiator’s address. 97 STATE State (INIT) 2 A Required Identifies the two character postal code for the state/province of the initiator’s

address. 98 ZIP CODE Zip Code (INIT) 12 A/N Required Identifies the zip code or postal code of the initiator’s address. 99 DSGCON Design/

Engineering Contact 15 A/N Conditional Identifies the employee of the customer or agent that should be contacted on

design/engineering matters and to whom the Design Layout Report will be sent.

Required when the ACT field is “N”, “C”, “M” or “T” Prohibited when the first position of the REQTYP field is “Q”. Otherwise optional.

100 TEL NO Telephone Number (DSGCON)

15 N Conditional Identifies the telephone number of the customer employee, office, or agent that should be contacted on design/engineering matters.

Required when the DSGCON field is populated, otherwise optional.



Field Data Description Length Type Usage Valid Entries Notes And Conditions 101 DSG FAX NO Design Facsimile Number 10 N Conditional Identifies the fax number of the design contact.

Required when the ACT field is “N”, “C”, “M” or “T”, the DRC field is not populated, the RTR field is “S” or “1-10”, the first position of the REQTYP field is not “Q” and the STREET (DSGCON) field is not populated, otherwise optional.

102 DSG EMAIL Design Electronic Mail Address

60 A/N Optional Identifies the electronic mail address of the design contact.

103 STREET Street Address (DSGCON) 25 A/N Conditional Identifies the street for the design/engineering contact.

Required when the ACT field is “N”, “C”, “M” or “T”, the DRC field is not populated, the RTR field is “S” or “1-10”

Otherwise optional.

104 DRC Design Routing Code 3 A/N Conditional Identifies the customer location routing code for the design contact for this request. The routing code represents the following information: Company, Street, Floor,

Room, City, Sate/Province, Zip Code.

Required when the ACT field is “N”, “C”, “M” or “T”, the first position of the REQTYP field is not “Q”, the RTR field is “S” or “1-10” and design contact address information is not provided.

Prohibited when the first position of the RTR field is “D” or “F”. Otherwise optional.

105 FDRC Facility Design Routing Code

3 A/N Conditional Identifies the customer location routing code for the design contact for the facility in a combined ASR situation. The routing code represents the following information: Company, Street, Floor,

Room, City, Sate/Province, Zip Code.

Required when the ACT field is “N”, “C”, “M” or “T”, the RTR field is “S” or “1-10”, the design contact address information is not provided and the FDRC is different from the DRC, otherwise prohibited.

106 FLOOR Floor (DSGCON) 3 A/N Conditional Identifies the floor of the design/engineering contact’s address.

. 107 ROOM Room (DSGCON) 6 A/N Conditional Identifies the room associated with the design/engineering contact’s address.

. 108 CITY City (DSGCON) 25 A Conditional Identifies the city, village, township, etc. of the design/engineering contact’s address.

Required when the ACT field is “N”, “C”, “M” or “T”, the DRC field not populated, the RTR field is “S” or “1-10”, and the first position of the REQTYP field is not “Q”.

Otherwise optional.

109 STATE State/Province (DSGCON) 2 A Conditional Identifies the two character postal code for the state/province of the design/engineering contact’s location.

Required when the ACT field is “N”, “C”, “M” or “T”, the DRC field not populated and the RTR field is “S” or “1-10”




Field Data Description Length Type Usage Valid Entries Notes And Conditions 110 ZIP CODE Zip Code (DSGCON) 12 A/N Conditional Identifies the zip code or postal code of the design/engineering contact’s address.

Required when the ACT field is “N”, “C”, “M” or “T”, the DRC field not populated and the RTR field is “S” or “1-10”


111 MTCE Maintenance Contact 11 A/N Conditional Identifies the customer employee or office responsible for maintenance subsequent to the installation of the access service.

Prohibited when the Implementation Contact and the Maintenance Contact are the same, otherwise optional

112 IMPCON Implementation Contact 15 A/N Conditional Identifies the customer employee or office responsible for control of installation and completion. This is the contact to be used for completions, acceptance testing and other such

related installation activity.

Required when the ACT field is “N”, “C”, “D”, “M” or “T”. Required when the ACT field is “R” and the TQ field is populated. Otherwise optional.

113 TEL NO Telephone Number (IMPCON)

15 N Conditional Identifies the telephone number of the implementation contact. Required when the IMPCON field is populated, otherwise prohibited.

114 D/TREC Date and Time Received 17 A/N Required Identifies the date and time that the provider received the Access Service Request. This field will be generated automatically on requests received from the customer

utilizing mechanized order entry. Field will be populated by Verizon

115 TEL NO Telephone Number (MTCE)

10 N Conditional Identifies the telephone number of the maintenance contact.

Required when the MTCE field is populated, otherwise prohibited.


3.3 Trunking Form Verizon ASR Business Rules v 27


3.3 Trunking Form Required when 1st position of the REQTYP field on the ASR Form is “M” or “L”.

Trunking Form - Specific Data Field Data Description Length Type Usage Valid Entries Notes And Conditions


3 A Required IAC Code CUS = Casual customer

Identifies the COMMON LANGUAGE IAC code for the customer submitting the ASR and receiving the Confirmation Notice Form (CN).

2. PON Purchase Order Number 16 A/N Required Identifies the customer’s unique purchase-order or requisition number that authorizes the issuance of this request or supplement. This PON field entry must be identical to the PON field entry on the ASR Form.

3. VER Version Identification 2 A/N Conditional Identifies the customer’s version number. This entry must be identical to the VER field entry on the ASR Form. Required when the VER field on the ASR Form is populated, otherwise prohibited.


18 A/N Conditional Identifies the number that may be generated by the provider mechanized systems, pre-assigned to the customer by the provider, or manually assigned by the provider to identify a customer’s request for service. This entry must be identical to the ASR NO field entry on the ASR Form.

Required when the ASR NO is pre assigned to the customer Required on all supplements when PON is not unique. Otherwise

5. NC Network Channel Code 4 A/N Conditional NC Code Identifies the network channel code for the circuit(s) involved. The NC code describes the channel provided by the provider from the customer’s ACTL/Primary Location to the provider central office switch.

Required when the ACT field on the ASR Form is “N” or “C”, otherwise optional. 6. NCI Network Channel Interface

Code 12 A/N Conditional NCI Code Identifies the electrical conditions on the circuit at the ACTL/Primary Location.

Positions 11 and 12 must be blank or populated with a dash (-) when the PSLI field on the ASR Form is “A”.

Required when the ACT field on the ASR Form is “N” or “C”, otherwise optional. 7. TLV Transmission Level 12 A/N Conditional Identifies the required transmission level when a non-standard interface is required at

the ACTL.

Positions 1-6 required when the ACT field on the ASR Form is “N” or “C” and position 8 or 11 of the NCI field is “I”.

Positions 1-6 optional when the ACT field on the ASR Form is “D”, “M” or “R” and position 8 or 11 of the NCI field is “I”.

Positions 7-12 required when the ACT field on the ASR Form is “N” or “C” and position 9 or 12 of the NCI field is “I”.

Positions 7-12 optional when the ACT field on the ASR Form is “D”, “M” or “R” and position 9 or 12 of the NCI field is “I”.


When ordering UNEs, the UNE field on the ASR Form = “Y” and the PSLI field on the ASR Form is populated with an “A”, TLV is prohibited.



Field Data Description Length Type Usage Valid Entries Notes And Conditions 8. TTT Transport Trunk

Termination Code 1 A/N Conditional Code Trunk Type

1 = Standard Originating 2 = Standard Terminating 3 = Standard 2-way 4 = Operator coin only 5 = Operator non-coin 6 = Operator combined coin & non-coin 7 = Operator full feature 8 = Tandem Signaling Trunk for

Originating 9 = Standard Land to Mobile A = Standard Mobile to Land

Identifies the type of trunk termination requested.

Required when the first position of the REQTYP field on the ASR Form is “M”, the ACTI field is “C” l Prohibited for FGB services whe the NC code specifies rotary dial station signaling transport termination.

Optional when the first position of the REQTYP field is “M” and the ACTI field is “C”.

9. DDLRD Desired Design Layout Report Date

10 N Optional U.S. Standard Metric Format

Identifies the date by which the Design Layout Report is requested to be forwarded to the customer.

10. DFOC Desired Firm Order Confirmation

10 N Optional Identifies the date by which the customer requests the FOC or DOC to be forwarded.

11. MLT Mobile To Land Traffic Percent

3 N Conditional Identifies the percentage of local traffic that is routed mobile to land.

Optional when the WST field on the ASR Form is populated, otherwise prohibited 12. IMTA Inter-Major Trading Area 3 N Conditional Identifies the percentage of Inter MTA calls.

Optional when the WST on the ASR Form and the CC field on the ASR Form is populated, otherwise prohibited.

13. QACI Quantity AdditionalCircuit Information

2 N Conditional Identifies the total number of ACI circuit detail sections sent by the customer when ordering Switched Services utilizing High Capacity facilities.

Required when the first position of the REQTYP field on the ASR Form is “M” and the first position of the AFO field on the ASR Form is “Y”, otherwise prohibited.



Field Data Description Length Type Usage Valid Entries Notes And Conditions 14. TRFTYP Traffic Type 5 A/N Conditional AL = Transiting and Local/IntraLATA Toll

(LT and LS) AM = Transiting and Local/IntraLATA

Toll /Inter-tandem AT = IntraLATA Toll AX = Audio Text (976) Information CH = Choke C0 = Coin Zero Plus C1 = Coin One Plus DA = Directory Assistance DC = Directory Assistance Call

Completion Service DD = Domestic Carrying traffic E9 = E911/911 ID = International traffic IO = ISDN originating IR = Intercept Service IT = ISDN terminating LA = Local Transiting and Local

/IntraLATA Toll LI = Local / IntraLATA Toll / InterLATA

Toll LL = Local LS = Local Transiting LT = Local / IntraLATA Toll NA = National Operator Assistance ND = National Directory Assistance OP = Operator assistance OT = Originating traffic PN = Portable Numbering

(DID-type for INP) PO = PSDS originating PT = PSDS terminating RI = Route Index (for INP) TM = Transiting/Inter-tandem TR = Telecomm Relay TS = Transiting TT = Terminating traffic VR = Busy Line Verify/Interrupt 50 = 500 traffic 80 = Toll free traffic (800, 888, 877, etc.) 90 = 900 traffic

Identifies the type of capacity requested

Required when the first position of the REQTYP field on the ASR Form is “M” and the ACT field on the ASR Form is “N”,and the ACTI field on the ASR Form is “C”. Optional. when the first position of the REQTYP field on the ASR Form is “M” and the ACT field on the ASR Form is “N and the ACTI field on the ASR Form is “B”. Optional. when the first position of the REQTYP field on the ASR Form is “M” and the ACT field on the ASR Form is “C”. Otherwise Prohibited.



Field Data Description Length Type Usage Valid Entries Notes And Conditions 15. SECTLV Secondary Transmission

Level 12 A/N Conditional Identifies the required transmission level when a non-standard interface is required.

This field should contain a one character plus or minus (+ or -), a two digit number, a decimal point, a one digit number and one character.

Positions 1 through 6 are used to specify the transmission level to be received at the provider switch.

Positions 7 through 12 are never used on this field and are reserved for future use. Transmission specifications may be described in provider tariffs and/or in technical

reference publications.

Optional when the ACT field on the ASR Form is “N” or “C” and the PSL field on the ASR Form is not populated, otherwise prohibited.

16. EML Expected Measured Loss 12 A/N Conditional Identifies the specification of the Expected Measured Loss (EML) This denotes a calculated loss which specifies the end-to-end 1004 Hz loss on a

terminated test connection between two readily accessible manual or remote test points. It is the sum of the inserted connection loss and test access loss including any test pads (customers and/or provider) or Decode Level Points (DLP) and Encode Level Points (ELP) in a digital switch environment.

The EML can be symmetrical or non-symmetrical configurations. Symmetrical configurations are specified using only the “T” portion of the field. Non-symmetrical configurations are specified by using both portions of the field.

Negative values should be indicated with a minus sign. Positive values should be indicated with a plus sign.

Transmission specifications may be described in provider tariffs and/or in technical reference publications.

Optional when the ACT field on the ASR Form is “N” or “C” and the PSL field on the ASR Form is not populated, otherwise prohibited.

17. CIC Carrier Identification Code 4 N Conditional Type Entry 950-XXXX = XXXX 10XXX = XXX 101XXXX = XXXX

Identifies the uniform Carrier Identification Code associated with the trunking request.

Required for FGB and FGD requests when the ACTI field on the ASR Form is “C”. Prohibited on requests for FGC and CCS Links. Otherwise optional.

18. TRN Trunk Number 9 N Conditional 0-9999 Identifies a specific customer trunk number or trunk number range. Trunk number component in the message format is a variable length, one to four

character numeric code and trunk numbers of fewer than 4 characters are left justified with remaining spaces not filled. Leading zeros are not to be used as part of the trunk number. However the trunk number zero is allowed.

Optional when the first position of the REQTYP field on the ASR Form is “M” and the TCIC field is not populated, otherwise prohibited.

19. TCIC Trunk CircuitIdentification Code

11 N Conditional A five numeric entry or range of five numeric entries. If the entry ends in 97, 98, 99 or 00, the NS field must be populated.

Identifies a specific trunk for which CCS is being performed. The TCIC numeric characters are right justified with leading zeros. The ten

thousand-digit should always be zero. Some switch types require provider/customer negotiation in assigning TCIC codes.

Required on all requests for CCS trunks, otherwise prohibited.



Field Data Description Length Type Usage Valid Entries Notes And Conditions 20. NS No Skip 1 A Conditional Y = include TCIC entries ending in 97, 98,

99 or 00. Identifies the customer’s requirement to include TCIC numbers ending in 97, 98, 99 or 00, for this request.

Optional when the TCIC field is populated, otherwise prohibited. 21. PSAP Public Service Answering

Point 25 A/N Conditional Prefix Followed by

E = County Name C = CLLI Code

Identifies the Public Service Answering Point to be used in the event of an ANI failure.

Required when ordering a new trunk group to an E911 tandem with ALI/ANI failure routing, otherwise optional.

22. RECCKT Related ExchangeCompany Circuit Identification

53 A/N Conditional Identifies the provider related circuit ID to which traffic is to be routed or the facility being disconnected. When the facility associated with trunks is also being disconnected, this field should

be populated with the facility identification.

Required when disconnecting facilities and the ACT field on the ASR Form is “D”. Optional when the ACT field on the ASR Form is “N” or “C” and alternate routing is

ordered or the SCRT field is populated. Otherwise prohibited.

Required when UNE field on ASR Form = “Y” in DC, DE, MA, MD, ME, NH, NJ, NY, PA, RI, VA, VT & WV and ASR ACT = “D” and disconnecting unbundled dedicated trunk ports or extended dedicate trunk ports.

23. PRI ADM Primary Add Drop Multiplexer

11 A/N Conditional Identifies a provider central office add drop multiplexer location used as a service access point when the ACTL/primary location is located off the ring network.

Required when the ACTL is located off the ring and the ACT field on the ASR Form is “N” or “C”, otherwise prohibited.

Prohibited when UNE field on ASR Form = “Y” in DC, DE, MA, MD, ME, NH, NJ, PA, RI, VA, VT & WV.

When the UNE field = “Y” in NY, the PRIADM field is not available at this time. 24. SEC ADM Secondary Add Drop

Multiplexer 11 A/N Conditional Identifies a provider central office add drop multiplexer location used as a service

access point when the secondary location is located off the ring network.

Required when the secondary location is located off the ring and the ACT field on the ASR Form is “N” or “C”, otherwise prohibited. Prohibited when the UNE field on the ASR Form is “Y”.

25. SCRT Service Class Routing 53 A/N Conditional Identifies the service prefix indicator and/or service access code based on how the customer wants its originating traffic directed.

Optional for FGC requests when the ACT field on the ASR Form is “N” or “C”, otherwise prohibited. Prohibited when the UNE field on the ASR Form is “Y”.

26. D.NPANXX Desired NPA and NXX 6 A/N Conditional Identifies the serving area of the tandem office or end office for the trunking service being provided.

Optional when the first position of the REQTYP field on the ASR Form is “M” and the ACT field on the ASR Form is “N” or “C”, otherwise prohibited. Prohibited when the UNE field on the ASR Form is “Y”.



Field Data Description Length Type Usage Valid Entries Notes And Conditions 27. CFA Connecting Facility

Assignment 42 A/N Conditional “NEW” or valid CFA

See Notes

Identifies the provider carrier system and channel to be used from a Wideband Analog, High Capacity or Optical Network facility when the customer has assignment control. The Connecting Facility Assignment consists of 5 elements.

1. Facility Designation (1-5 characters) 2. Facility Type (1-6 characters) 3. Channel/Pair (1-5 characters) 4. Location A (8 or 11 characters) 5. Location Z (8 or 11 characters)

On initial facility order (dedicated trunk port), an entry of “NEW” may be used. Virgules are used as delimiters to separate all elements of the CFA. All elements of the CFA are left justified with no trailing spaces. When multiple levels of CFA are being provided, the highest level of CFA is

populated in the CFA field and the lower level of CFA is populated in the SCFA field.

Required when utilizing Wideband or High Capacity or Optical Network facilities when the ACT field on the ASR Form is “N” or “C” and the first position of the LTP field on the ASR Form is “N”.

Required when the first position of the LTP field on the ASR Form is “C”, “E”, “F”, “L”, “Q” or “R” and the ACT field on the ASR Form is “N” or “C”.

Otherwise optional.

A valid CFA is required when ordering trunks associated with spare, already in place, dedicated trunk port capacity.

When UNE field on ASR Form = “Y”, ordering new dedicated trunk port or EDTP Type 1* with DS1 interface, entry of “NEW” is required.

When UNE field on ASR Form = ”Y”, ordering new EDTP Type 1* dedicated trunk port with DS3 interface, valid EDTP DS3 CFA required.

* where available 28. CFAU CFA Use 1 A Conditional Y = Provider carrier system Identifies the CFA as a provider carrier system.

Required when the CFA is a provider carrier system, otherwise prohibited. 29. CPT Channel Pair/Timeslot 11 N Conditional Identifies the Synchronous Transport Signal (STS), Virtual Tributary (VT) Group

and VT Timeslot of the ring.

Required when the ACT field on the ASR Form is “N” or “C”, the FNI field on the ASR Form is populated and the customer has assignment control, otherwise prohibited.

30. MUXLOC Multiplexing Location 11 A/N Conditional Valid CLLI representing VZ office. Identifies the CLLI code of the provider central office which provides multiplexing for a service riding a High Capacity service. MUX is associated with the CFA which is one level above the service being ordered.

Required when utilizing multiplexing services and the ACT field on the ASR Form is “N”, otherwise optional.



Field Data Description Length Type Usage Valid Entries Notes And Conditions 31. CSL Customer Switch Location 11 A/N Conditional Valid 11 character CLLI

RMKS = Use REMARKS Identifies the CLLI code or narrative description of the customer’s switch.

Required for ordering CCS trunks when the ACT field on the ASR Form is “N”, otherwise optional.

When the UNE field on ASR = “Y” and the SPEC field on ASR = “UNB1D2”, CSL CLLI must equal the CLLI in the PSL field on the ASR Form.

32. CST Customer Switch Type 12 A/N Conditional Identifies the customer’s switch type.

Required for ordering CCS trunks when the ACT field on the ASR Form is “N”, otherwise optional.

33. CSPC Customer Signaling Point Code

11 N Conditional Identifies the electronic address of the customer’s signaling point (SP) or signaling transfer point (STP) in a CCS network.

When the UNE field on the ASR form = “Y” and the SPEC field on the ASR = “UNB1D2”, the CSPC identifies the VZ signaling point of the CLLI in PSL field on the ASR Form.

Required when the first position of the REQTYP field on the ASR Form is “L”. Required for CCS trunk requests. Otherwise prohibited.

34. SECLOC Secondary Location 11 A/N Conditional End Office CLLI code Access Tandem CLLI code Signaling Point CLLI code Operator Services Tandem CLLI

Identifies the provider’s first point of switching for trunks or signaling point for CCS Links being provided.

When the PSLI field on the ASR form is populated with an “A”, the PSL field on the ASR form identifies the provider’s first point of switching for trunks being provided and the SECLOC identifies the provider’s second point of switching for the trunks being provided.

Required when the ACT field on the ASR Form is “N”, otherwise optional.



Field Data Description Length Type Usage Valid Entries Notes And Conditions 35. SCFA Secondary Connecting

Facility Assignment 42 A/N Conditional Identifies the provider carrier system and channel to be used from a Wideband

Analog, High Capacity or Optical Network facility when the customer has assignment control. The Secondary Connecting Facility Identification consists of five elements.


On initial facility order (extended dedicated trunk port), an entry of “NEW” may be used.

Virgules are used as delimiters to separate all elements of the SCFA. All elements of the SCFA are left justified with no trailing spaces. When multiple levels of CFA are being provided, the highest level of CFA is

populated in the CFA field and the lower level of CFA is populated in the SCFA field.

When the UNE field on the ASR Form is populated, use of the SCFA field may be restricted to those companies that offer re-bundling.

Optional when the CFA field is populated, otherwise prohibited.

When UNE field on ASR Form = “Y” and SPEC=UNBALL in DC, DE, MA, MD, ME, NH, NJ, NY, RI, WV, VA & VT, SCFA is prohibited.

When ordering EDTP Type 1* new dedicated trunk port(s) with DS3 interface, entry of “NEW” is required.

* where available 36. HBAN High Capacity Channel

Billing Account Number 12 A/N Conditional “N” or established UNE BAN

E = Existing Identifies the billing account to which the recurring and non-recurring charges for the original High Capacity channel or unbundled element are billed.

Required when the ACT field on the ASR Form is “N”, the first position of the LTP field on the ASR Form is “B”, “D” ”C”, “E”, “F”, “L”, “M”, “N”, “P”, “Q” or “R” and this entry differs from the BAN field on the ASR Form, otherwise optional. When UNE field on ASR Form = “Y”, and ordering new dedicated trunk port(s), HBAN is required.

37. CCEA Cross ConnectionEquipment Assignment

60 A/N Conditional Identifies the physical point of termination at a collocation arrangement.

When ordering UNEs, new dedicated trunk port(s) with DS1 connection(s) to central office collocation arrangement, CCEA is required.

38. CKR1 Customer CircuitReference (T1)

40 A/N Conditional Identifies the circuit number or range of circuit numbers used by the customer for the T1 Transport involved.

Optional when the first position of the LTP field on the ASR Form is “B”, “C”, “D”, “E”, “L”, “M”, “N”, “P”, or “Q” and the ACT field on the ASR Form is “N”, “C” or “D”. Optional when ordering new UNE dedicated trunk port(s) and when populated will

be associated to dedicated trunk port(s) on the CSR. Other wise prohibited



Field Data Description Length Type Usage Valid Entries Notes And Conditions 39. FACTL Facility Access Customer

Terminal Location 11 A/N Conditional Identifies the CLLI code of the customer facility terminal location for the DS1

facility being ordered.

Required when the NC1 field is populated, otherwise prohibited.

When ordering UNEs other than EDTP*, the CLLI must represent a central office collocation arrangement**.

* where available ** � In MA, ME, NH, NY, RI & VT, central office collocation arrangement 11

character CLLI must have a “H” in the 9th character position. �� In DC, DE, MD, NJ, PA, & WV, central office collocation arrangement 11

character CLLI must have a “H” in the 9th character position and a “C”, “G”, “P”, “R” or “V” in the 10th character position.

�� In the former Bell Atlantic region of VA, central office collocation arrangement 11 character CLLI must have a “H” in the 9th character position and a “C”, “G”, “P”, “R” or “V” in the 10th character position.

40. NC1 (T1) Network Channel Code (T1)

4 A/N Conditional NC Code Identifies the network channel code for the T1 transport involved. The network channel code describes the channel provided by the provider from the customer’s ACTL to a provider end office or access tandem.

Required when new T1 facilities or UNE transport are being ordered, the first position of the LTP field on the ASR Form is “B”, “C”, “D”, “E”, “L”, “M”, “N”, “P” or “Q” and the ACT field on the ASR Form is “N”.

Optional when the first position of the LTP field on the ASR Form is “B”, “C”, “D”, “E”, “L”, “M”, “N”, “P” or “Q” and the ACT field on the ASR Form is “C”.


When ordering UNEs, NC1 is required when the first position of the LTP = “N” and the ASR ACT field =“N” and the CFA or SCFA = “NEW” to identify the NC code for dedicated trunk port.

41. FIMPTEL Facility ImplementationTelephone Number (T1)

15 N Conditional Identifies the telephone number of the implementation contact for the T1 facility.

Required when the NC1 Facility (T1) Implementation telephone number is not the same as the TEL NO (IMPCON) field on the ASR Form, otherwise optional.

42. DFDLRD Desired Facility Design Layout Date

10 N Optional Identifies the date by which the switched access facility DLR is requested to be forwarded to the customer for the digital interfaces(s).

43. SR Special Routing Code 1 A Conditional A = Avoidance B = Avoidance and diversity C = Cable Only D = Diversity

Identifies the type of special routing requested.

Prohibited when the ACT field on the ASR Form is “M”, otherwise optional.

44. MBA Make Busy Arrangement 1 A Conditional A = Install B = Install with recorded announcements C = Remove

Identifies the requirement for a Make Busy Arrangement.

Optional for FGB requests when the ACT field on the ASR Form is “N” or “C”. Optional for FGD requests when the ACT field on the ASR Form is “N” or “C” and

the BSA field on the ASR Form is populated. Otherwise prohibited



Field Data Description Length Type Usage Valid Entries Notes And Conditions 45. OPS Operator Services 1 A Conditional A = O-transfer (without operator function)

B = O-transfer (with operator function) C = Inward assistance D = Busy Line Verification/Call interrupt E = A & C F = B & C G = A & D H = B & D J = Toll & operator assist-local (not

directory assistance)

Identifies the operator assisted services that may be offered by some providers.

Required when the ACT field on the ASR Form is “N” or “C” and operator services are being ordered, otherwise prohibited.

46. GETO General Exchange Tariff Options Code

1 A Conditional D = Bill Number Screening O = Other

Identifies the requirement for non-tariff or secondary tariff options in conjunction with the access service.

Optional for FGB requests when on the ACT field on the ASR Form is “N” or “C”, otherwise prohibited.

47. WAC Waive Carrier Common Line Charge

1 A Conditional Y = Waiver applies N = No waiver applies

Indicates applicability of Carrier Common Line (CCL) charge for the entire billing account.

Optional for FGB and FGD requests when the ACT field on the ASR Form is “N”, “C” or “R”, otherwise prohibited. Use of this field is based on provider tariffs/practices.

48. CDND Called Directory Number Delivery

1 A Conditional Y = Install R = Remove

Identifies the requirement to deliver the number dialed when number translations have occurred.

Optional when the ACT field on the ASR Form is “N” or “C” and the BSA field on the ASR Form is populated, otherwise prohibited.

49. DIDQ DID Trunk Queuing 1 A Conditional Y = Install R = Remove

Identifies the requirement to permit calls directed to an all trunk busy DID group to be held for delivery when a DID trunk becomes idle.


50. STR Single tandem Routing 1 A Conditional Y = Install R = Remove

Identifies a request for connection at a single tandem for terminating calls to a single provider’s tandems and subtending offices in multiple tandem LATAs.

Optional when the provider has multiple tandems within the LATA, otherwise prohibited.

51. REL TSC Related Two-Six Code 8 A/N Conditional N = New Valid TSC

Identifies the FGC trunk group to which overflow end office traffic will be routed or the CCS Link Set associated with the CCS trunk group.

Required when FGC overflow is requested. Required for new CCS trunk groups when ACTI field on the ASR Form is “C”. Otherwise optional.

52. ALTRO Related Alternate Order Number

17 A/N Conditional Identifies the provider pending related service order requesting capacity for the other trunk group involved when alternate routing is requested.

Optional when the first position of the REQTYP field on the ASR Form is “M” and the ACT field on the ASR Form is “N” or “C”, otherwise prohibited.

53. FGD-950 FGD With 950 Access 1 A Conditional Y = Install R = Remove

Identifies a request to route 950 originating traffic over FGD trunk groups.

Optional for FGD requests when the ACT field on the ASR Form is “N” or “C”, otherwise prohibited.



Field Data Description Length Type Usage Valid Entries Notes And Conditions 54. CHOK Choke Network 3 A/N Conditional 1-999 = Quantity of trunks to be provided

with this option R = Remove

Indicates the number of trunks within a trunk group to be designated for 900 traffic.

Optional for FGC and FGD requests when the ACT field on the ASR Form is “N” or “C”, otherwise prohibited.

55. CGAP Call Gapping Interval 3 A/N Conditional Numeric = 1-999 R = Remove

Indicates the period of time, in seconds, between calls to 900 service.

Optional for FGD requests when the ACT field on the ASR Form is “N” or “C”, otherwise prohibited.

56. PCACT Point Code Activity Type 1 A Conditional A = Establish point code R = Remove point code A = Add point code use D = Delete point code use

Identifies the link set translations required for point codes in the Service Signaling Point Code (SSPC) field.

Optional when the first position of the REQTYP field on the ASR Form is “L” and the ACT field on the ASR Form is “N” or “C”, otherwise prohibited.

57. LT Link Type 1 A Conditional A = Access Link B = Bridge Link D = Diagonal Link E = Extension Link F = Fully associated Link

Identifies a particular CCS link’s functionality.

Required when the first position of the REQTYP on the ASR Form is “L”, otherwise prohibited.

58. SLC Signaling Link Code 2 N Conditional Identifies the signaling link within the CCS link set.

Required when the first position of the REQTYP field on the ASR Form is “L”, otherwise prohibited.

59. APC Alias Point Code 11 N Conditional Identifies the logical network address of the Signaling Transfer Point (STP).

Optional when the PCACT field is populated and the ACT field on the ASR Form is “C”, otherwise prohibited.

60. TSC2 Two Six Code 2 8 A/N Conditional Identifies a code assigned to a group of signaling link(s) of a common channel signaling link set.


61. TSC3 Two Six Code 3 8 A/N Conditional Identifies a code assigned to a group of signaling link(s) of a common channel signaling link set.

Optional when the TSC2 field is populated, otherwise prohibited. 62. TSC4 Two Six Code 4 8 A/N Conditional Identifies a code assigned to a group of signaling link(s) of a common channel

signaling link set.

Optional when the TSC3 field is populated, otherwise prohibited. 63. SSPC Service Signaling Point

Code(s) 11 N Conditional Identifies the signaling point code(s) affected by the point code activity (PCACT).

Required when the PCACT field is populated, otherwise prohibited. 64. SSPCTYPE Type of Signaling Point

Code 1 A Conditional S = SSP

T = STP C = SCP

Identifies the type of signaling point related to the service signaling point code.

Required when the SSPC field is populated, otherwise prohibited.



Field Data Description Length Type Usage Valid Entries Notes And Conditions 65. PCU Point Code Use 8 A/N Conditional 1 = 800 Data base

2 = Call Set Up Inter Network 3 = LIDB 4 = ISDN 5 = CCO 6 = AIN/PCS 7 = CNAM 8 = Wireless TCAP 9 = Call Set Up Intra Network 10 = Other A = Calling Party Pays B = Number Portability C = CLASS D = ISVM E = Get Data F = Originating Line Number Screening (OLNS)

Identifies the type of traffic to be routed to the point codes in the Service Signaling Point Code (SSPC) field. When the field is populated with “10”, specify requirements in the REMARKS field.

Required when the SSPC field is populated, otherwise prohibited.

66. PC TYP Point Code Type 1 A Conditional I = Intermediate GTT Signaling Transfer Point

G = Gateway Signaling Transfer Point S = Signaling Point (e.g., operator services

switch)

Identifies the usage of the network address point (point code) in the common channel signaling network.


67. SSN Sub System Number 3 N Conditional Identifies a specific software application in a common channel signaling network.


68. TTN Translation Type Number 3 N Conditional Identifies the STP table used to perform global title translations.


69. SSPC LOC Service Signaling Point Code Location

11 A/N Conditional Identifies the CLLI Code associated with the Service Signaling Point Code (SSPC).

Optional when the PCACT field is populated, otherwise prohibited. 70. PCNA Point Code Name

Abbreviation 3 A Conditional Identifies the COMMON LANGUAGE IAC code for the customer of the SSPC.

Optional when the PCACT field is populated, otherwise prohibited. 71. REMARKS Remarks 124 A/N Conditional Identifies a free flowing field which can be used to expand upon and clarify other

data on this form.

When the 1st position REQTYP on the ASR Form = “L”, the SS7 Node’s CLLI is required when the CSL field is blank. Otherwise optional.

3.4 Transport Form Verizon ASR Business Rules v 27


3.4 Transport Form Required when the 1st position of the REQTYP field on the ASR Form is “S”

Transport Form - Specific Data Field Data Description Length Type Usage Valid Entries Notes And Conditions


3 A Required IAC Code CUS = Casual customer or end user billing

Identifies the COMMON LANGUAGE IAC code for the customer submitting the ASR and receiving the Confirmation Notice Form (CN).

2. PON Purchase Order Number 16 A/N Required Identifies the customer’s unique purchase-order or requisition number that authorizes the issuance of this request or supplement. This PON field entry must be identical to the PON field entry on the ASR Form.

3. VER Version Identification 2 A/N Conditional Identifies the customer’s version number. This entry must be identical to the VER field entry on the ASR Form.

Required when the VER field on the ASR Form is populated, otherwise prohibited. 4. ASR NO Access Service Request

Number 18 A/N Conditional Identifies the number that may be generated by the provider mechanized systems,

pre-assigned to the customer by the provider, or manually assigned by the provider to identify a customer’s request for service. This entry must be identical to the ASR NO field entry on the ASR Form.


5. NC Network Channel Code 4 A/N Conditional NC Code Identifies the network channel code for the circuit(s) involved. The network channel code describes the channel provided by the provider.

Required when the ACT field on the ASR Form is “N”, “C”, “T”, otherwise optional.

When UNE field on the ASR Form = “Y”, NC may not indicate bridging. 6. NCI Network Channel Interface

Code 12 A/N Conditional NCI Code Identifies the electrical conditions on the circuit at the ACTL/Primary Location.

Required when the ACT field on the ASR Form is “N”, “C” or “T”, otherwise optional.



Field Data Description Length Type Usage Valid Entries Notes And Conditions 7. TLV Transmission Level 12 A/N Conditional Identifies the required transmission level when a non-standard interface is required at

the ACTL. This field should contain a one character plus or minus (+ or -), a two digit number, a

decimal point, a one digit number, a one digit plus or minus, a two digit number, a decimal point, and a one digit number.

Positions 1-6 are used when an “I” has been entered in position 8 or 11 of the NCI field and represents the transmission level to be received by the customer at the ACTL interface from the provider.

Positions 7-12 are used when an “I” has been entered in position 9 or 12 of the NCI field and represents the transmission level to be transmitted from the ACTL interface to the provider.

Positions 1-6 are required when the ACT field on the ASR Form is “N”, “C” or “T” and position 8 or 11 of the NCI field is “I”.

Positions 1-6 are optional when the ACT field on the ASR Form is “D”, “M” or “R” and position 8 or 11 of the NCI field is “I”.

Positions 7-12 are required when the ACT field on the ASR Form is “N”, “C” or “T” and position 9 or 12 of the NCI field is “I”.

Positions 7-12 are optional when the ACT field on the ASR Form is “D”, “M” or “R” and position 9 or 12 of the NCI field is “I”.

Otherwise prohibited. 8. SECNCI Secondary Network

Channel Interface Code 12 A/N Conditional NCI Code Identifies the electrical conditions on the circuit at the secondary ACTL or end user

location.

Required for two point service when the ACT field on the ASR Form is “N”, “C” or “T”.

Optional for Hi-Cap facilities when multplexing is provided. Prohibited for multipoint services. Otherwise optional.



Field Data Description Length Type Usage Valid Entries Notes And Conditions 9. SECTLV Secondary Transmission

Level 12 A/N Conditional Identifies the required transmission level when a non-standard interface is required.

This field should contain a one character plus or minus (+ or -), a two digit number, a decimal point, a one digit number, a one digit plus or minus, a two digit number, a decimal point, and a one digit number.

Positions 1-6 are used when an “I” has been entered in Position 8 or 11 of the SECNCI field and represent the transmission level to be received at the end user or secondary ACTL interface from the provider.

Positions 7-12 are used when an “I” has been entered in position 9 or 12 of the SECNCI field and represents the transmission level to be transmitted from the secondary ACTL or end user interface to the provider.

Transmission specifications may be described in provider tariffs/contracts and/or in technical reference publications.

Positions 1-6 are required when the ACT field on the ASR Form is “N”, “C” or “T” and position 8 or 11 of the SECNCI field is “I”.

Positions 1-6 are optional when the ACT field on the ASR Form is “D”, “M” or “R” and position 8 or 11 of the SECNCI field is “I”.

Positions 7-12 are required when the ACT field on the ASR Form is “N”, “C” or “T” and position 9 or 12 of the SECNCI field is “I”.

Positions 7-12 are optional when the ACT field on the ASR Form is “D”, “M” or “R” and position 9 or 12 of the SECNCI field is “I”.

Otherwise prohibited. 10. NSIM Non-simultaneous

Transmission of Signal and Supervisory Tones Requirements

1 A Conditional Y = Requested R = Remove

Indicates non-simultaneous transmission of signal and supervisory tones between the frequencies of 300 and 3000 Hz is required.

Optional for Wideband Digital type 2 service when the ACT field on the ASR Form is “N”, “C”, “T” or “R” and the UNE field on the ASR Form is not populated, otherwise prohibited.



Field Data Description Length Type Usage Valid Entries Notes And Conditions 11. SR Special Routing Code 3 A/N Conditional 1st character -Primary location

A = Cable only B = Diversity C = Disaster Recovery D = Route other than normal E = Self Healing Loop F = Alternate Wire Center G = Self Healing Loop via Alternate Wire

Center H = Self Healing Wire Center K = Special Routing at POP/PRILOC N = N/A

2nd character-Interoffice Facility 1 = Avoidance 2 = Diversity 3 = Avoidance and Diversity 4 = Self Healing Interoffice Facilities 5 = Special Routing for Interoffice

Facilities 6 = Route other than normal N = N/A

3rd character-Secondary Location A = Cable only B = Diversity C = Disaster Recovery D = Route other than normal E = Self Healing Loop F = Alternate Wire Center G = Self Healing Loop via Alternate Wire

Center H = Self Healing Wire Center J = Self Healing Alternate Wire Center K = Special Routing at SECLOC N = N/A

Identifies the type of special routing requested.

Prohibited when the ACT field on the ASR Form is “M”, otherwise optional.

12. S25 Surcharge Status 8 A/N Conditional A = The customer certifies that the access service is terminated in a device not capable of interconnecting the service with local exchange service…

B = The customer has a blanket exemption certification on file with the provider

C = is applicable to all circuits NA = Not applicable

Identifies whether a surcharge is applicable (non-exempt) or non-applicable (exempt) for the number of voice grade circuits ordered between two customer locations.

Required when the ACT field on the ASR Form is “N” and the first position of the LTP field on the ASR Form is not “A”, “G”, “H”, “I”, “J” or “K”.

Prohibited when the ACT field on the ASR Form is not “N” and first position of the LTP field on the ASR Form is “A”, “G”, “H”, “I”, “J” or “K”.

Prohibited when UNE field on ASR Form is populated. Otherwise optional.

13. ER S25 Exempt Reason 1 N Conditional Tells the provider why a circuit is exempt from the special access surcharge.

Optional when the S25 field is “A” or “B”, otherwise prohibited.



Field Data Description Length Type Usage Valid Entries Notes And Conditions 14. SSS Secondary Service Support 1 A Conditional Identifies the features, functions or options associated with this DNAL.


15. ATN Associated Telephone Number

12 A/N Conditional Identifies the telephone number/TSC of the associated service when the DNAL is providing additional options/feature functionality to the associated service or the special access is utilizing the loop facility of the associated exchange service.

Required when the SSS field is populated. Required when utilizing exchange loop facilities. Otherwise prohibited.

16. TRF Transfer Feature 1 A/N Conditional Identifies the transfer feature indicator for transfer relay.

Optional when the ACT field on the ASR Form is “N”, “C”, “T” or “R” and the UNE field on ASR Form is not populated, otherwise prohibited.

17. MST Master 1 A Conditional M = This is master leg/segment A = This is an alternate to the master leg R = Remove this as the master or alternate

master leg/segment

Indicator designating a circuit portion as the master leg/segment on a multipoint configuration.

Required for a multipoint circuit configuration when the ACT field on the ASR Form is “N” and this leg/segment is the master/alternate master.

Prohibited when UNE field on the ASR Form is populated. Otherwise optional.

18. HVP High Voltage Protection 1 A Conditional Y = Required R = Remove

Indicates the requirement for high voltage protection at a point of termination.

Prohibited when UNE field on the ASR Form is populated or the ACT on the ASR is “D”, otherwise optional.

19. OTC Other Exchange Company 4 A/N Conditional Identifies the provider responsible for providing the SECLOC termination.

Required when the ASC-EC field on the ASR Form is populated, the first position of the SECLOC field is ”E” and the SI field on the SALI Form is ”N”.

Optional when the ASC-EC field on the ASR Form is populated and the SI field on the SALI Form is ”C”.

Optional when the ASC-EC field on the ASR Form is populated and the CKLT field is populated.

Otherwise prohibited. 20. ISDN SEQ. ISDN Sequence 4 N Conditional Identifies the sequencing of all subsequent ISDN PRI DS1’s and the total number of

DS1’s within the hunting arrangement.

Required for ISDN PRI service when the ACT field on the ASR is “N” or “C”, the NOR field is greater than zero (0) and the SI field on the SALI From is “C”.

Prohibited when the UNE field on the ASR Form is populated. Otherwise Optional.

21. CKLT Bridging Location 11 A/N Conditional Identifies the CLLI code of the provider central office which provides bridging.

Required for multipoint services when the ACT field on the ASR Form is “N” or “C”.

Prohibited when the UNE field on the ASR Form is populated. Otherwise optional.



Field Data Description Length Type Usage Valid Entries Notes And Conditions 22. NSL Number of Secondary

Locations 2 N Conditional Identifies the number of end points with circuit activity as shown on the MSL

Form(s).

Required when MSL Form(s) are associated with the request and the UNE field on the ASR Form is not populated, otherwise prohibited.

23. CFAU CFA Use 1 A Conditional Y = Provider carrier system Identifies the CFA as a provider carrier system.

Required when the CFA is a provider carrier system, otherwise prohibited. 24. CFA Connecting Facility

Assignment 42 A/N Conditional Identifies the provider carrier system and channel to be used from a Wideband

Analog, High Capacity or Optical Network facility when the customer has assignment control. The Connecting Facility Identification consists of 5 elements.


Virgules (/) are used as delimiters to separate elements of the CFA. All element entries of the CFA are left justified with no trailing spaces.

Required when the utilizing Wideband, or Hi-Cap, or Optical Network facilities or low speed connection of an unbundled multiplex network element and the ACT field on the ASR Form is “N” or “C”, otherwise optional.

25. DIR Directionality 1 N Conditional 1 = High speed group side one 2 = High speed group side two

Identifies the direction of the circuit’s path when it ingresses (enters) on a bi-directional dedicated SONET ring identified in the PRI ADM field and the customer has assignment control.

Optional when the PRI ADM field is populated, otherwise prohibited. 26. CPT Channel Pair/Timeslot 11 N Conditional Identifies the Synchronous Transport Signal (STS) Virtual Tributory (VT) Group

and VT Timeslot of the ring.

Required when the ACT field on the ASR Form is “N”, “C” or “T”, the FNI field on the ASR Form is populated and the customer has assignment control, otherwise prohibited.

27. SCFA Secondary Connecting Facility Assignment

42 A/N Conditional Identifies the provider carrier system and channel to be used from a Wideband Analog, High Capacity or Optical Network facility for a thru-connect configuration when the customer has assignment control.

The Connecting Facility Identification consists of 5 elements. 1. Facility Designation (1-5 characters) 2. Facility Type (1-6 characters) 3. Channel/Pair (1-5 characters) 4. Location A (8 or 11 characters) 5. Location Z (8 or 11 characters)

Virgules (/) are used as delimiters to separate elements of the CFA. All element entries of the CFA are left justified with no trailing spaces.

Required when utilizing Wideband, High Capacity or Optical Network facilities and the ACT field on the ASR Form is “N” or “C”,

Prohibited when the UNE field is populated. Otherwise optional.



Field Data Description Length Type Usage Valid Entries Notes And Conditions 28. SDIR Secondary Directionality 1 N Conditional 1 = High speed group side one

2 = High speed group side two Identifies the direction of the circuit’s path when it egresses (exits) on a bi-directional dedicated SONET ring, identified in the SEC ADM field and the customer has assignment control.

Optional when the SEC ADM field is populated, otherwise prohibited. 29. SECLOC Secondary Location 12 A/N Conditional Prefix

E = followed by Blanks (Used if SECLOC is end user ‘s premise (for special access, includes a second ACTL or CENTREX termination) on the SALI Form must be populated in EUNAME field on the SALI form)

C = followed by CLLI Code(Used if SECLOC is a provider end office switch(non-CENTREX) or a secondary ACTL when termination is UNE transport.

Identifies the terminating end of the circuit, a provider end office or the first point of switching for the circuit being provided.

Required when the first position of the REQTYP field on the ASR Form is “S” and the ACT field on the ASR Form is “N”, “C”, “M” or “T” and the NSL field is not populated.

Prohibited when the NSL field is populated. Otherwise optional.

When ordering UNEs: 1) as IOF transport - prefix must be a C, followed by an 11 character CLLI

identifying a second ACTL. 2) as Multipexing - prefix must be a C, followed by an 8 or 11 character CLLI

identifying the VZ wire center performing the multiplexing function. 3) as DS1, DS3, OC3 or OC12 Loop or Voice Grade, DS0, DS1 or DS3 EEL Loop

connection to an end user premises - prefix must be an E, followed by blanks. 4) as Dark Fiber in MA and NH - prefix must be a “C”, followed by an 11 character

CLLI. 5) as IOF Dark Fiber in DC, DE, MD, ME, NJ, NY, PA, RI, VA, VT & WV - prefix

must be a “C”, followed by an 11 character CLLI identifying a second ACTL. 6) as Loop Dark Fiber in DC, DE, MD, ME, NJ, NY, PA, RI, VA, VT & WV - prefix

must be an “E”, followed by blanks. 7) as DTS - prefix must be a C, followed by an 11 character CLLI identifying a

second ACTL and the 1st 8 characters must match the 1st 8 characters of the ACTL field on the ASR Form.

8) as UFSE - prefix must be a “C”, followed by an 11 character CLLI with a “J” in the 9th character position.

30. MUXLOC Multiplexing Location 11 A/N Conditional Identifies the CLLI Code of the provider central office which provides multiplexing for a service riding a High Capacity service.

Required when utilizing multiplexing services and the ACT field on the ASR Form is “N”, “C” or “T”, otherwise optional.

31. HBAN High Capacity Channel Billing Account Number

12 A/N Conditional Valid Billing Account Number E = Existing

Identifies the billing account to which the recurring and non-recurring charges for the original High Capacity channel are billed.

Required when the ACT field on the ASR Form is “N” or “C”, the CFA field is populated and ratcheting of the Hi-Cap account is required.


32. PRI ADM Primary Add Drop Multiplexer

11 A/N Conditional Identifies a provider central office add drop multiplexer location used as a service access point when the ACTL/primary location is located off the ring network.

Required when the ACTL is located off the ring and the ACT field on the ASR Form is “N”, “C” or “T” and the UNE field on the ASR Form is not populated, otherwise prohibited.



Field Data Description Length Type Usage Valid Entries Notes And Conditions 33. SEC ADM Secondary Add Drop

Multiplexer 11 A/N Conditional Identifies a provider central office add drop multiplexer location used as a service

access point when the secondary location is located off the ring network.

Required when the secondary location is located off the ring and the ACT field on the ASR Form is “N”, “C” or “T” and the UNE field on the ASR Form is not populated, otherwise prohibited.

34. CLK Clock Source 1 N Conditional 1 = Internal 2 = External 3 = Loop

Indicates the source of the timing for the port which carries the broadband intercarrier interface on the broadband switching system.

Optional when the first position of the REQTYP field on the ASR Form is “V”, otherwise prohibited.

35. NVC Number of Virtual Connections

2 N Conditional Identifies the number of VCs requested.

Required when the first position of the REQTYP field on the ASR Form is “V” and VC Form(s) are associated with the request, otherwise prohibited.

36. PSPEED Port Speed 7 A/N Conditional Identifies the speed of the port. The last character is always expressed in megabits (M) or kilobits (K).

Required when the first position of the REQTYP field on the ASR Form is “V,” the ACT field on the ASR Form is “N”, and utilizing fractional T1.

Prohibited when the first position of the REQTYP field on the ASR Form is “S”. Prohibited when the first position of the REQTYP field on the ASR Form is “V” and

the ACT field on the ASR Form is “M” or “T”. Otherwise optional.

37. LMP Link Management Protocol

1 N Conditional 1 = LMI 2 = Annex A 3 = Annex D 4 = Auto 5 = Other (i.e., RLMI version) 6 = None

Identifies the VC status signaling protocol.

Required when the first position of the REQTYP field on the ASR Form is “V” and the ACT field on the ASR Form is “N”.

Optional when the first position of the REQTYP field on the ASR Form is “V” and the ACT on the ASR Form is “C”, “D” or “R”.

Otherwise prohibited. 38. N/U NNI or UNI 1 A Conditional N = NNI

U = UNI Identifies if the service ordered is to be network to network or user to network.

Required when the first position of the REQTYP field on the ASR Form is “V” and the ACT field on the ASR Form is “N”.

Optional when the first position of the REQTYP field on the ASR Form is “V” and the ACT field on the ASR Form is “C”, “D” or “R”.

Otherwise prohibited. 39. ZLG Zero Logic 1 A Conditional Y = CPE does not support B8ZS Identifies if the customer’s broadband customer premises equipment (CPE) is unable

to support B8ZS.

Optional when the first position of the REQTYP field on the ASR Form is “V” and the ACT field on the ASR Form is “N”, “C”, “D” or “R”, otherwise prohibited.

40. BSC Broadband Service Category

1 A Conditional C = Cell Relay (ATM) F = Frame Relay

Identifies category of virtual service requested.

Required when first position of REQTYP field on the ASR Form is “V”, otherwise prohibited.

41. ETET End To End Test 1 A Conditional Y = End to end testing requested Indicates the customer request for end-to-end (A to Z) standard acceptance testing at service delivery when a smart jack (SMJK) is requested.

Optional when the SMJK field on the SALI Form is populated and the UNE field on the ASR Form is not populated, otherwise prohibited.



Field Data Description Length Type Usage Valid Entries Notes And Conditions 42. CCEA Cross Connect Equipment

Assignment 60 A/N Conditional Identifies the physical point of cross connection at a collocation arrangement.

This information is provided by the customer when they have assignment control. When the CCEA field is populated, the information will identify the tie-down

assignment at the ACTL.

When ordering UNEs with a connection(s) to a central office collocation arrangement(s), CCEA is required.

When ordering a connection(s) to a secondary collocation arrangement(s), connection assignment information must appear in the SCCEA field.

43. SCCEA Secondary Cross Connect Equipment Assignment

60 A/N Conditional Identifies the physical point of termination at the secondary collocation arrangement.

This information is provided by the customer when they have assignment control. When the SCCEA field is populated, the information will identify the tie-down

assignment at the SECLOC.

When ordering UNEs with a connection(s) to a collocation arrangement identified in the SECLOC field, SCCEA is required.

When ordering connections to a central office collocation arrangement identified in the ACTL field on the ASR Form, connection assignment information must appear in the CCEA field.

44. GETO General Exchange Tariff Options Code

1 A Conditional Identifies the requirement for non-tariff or secondary tariff options in conjunction with the access service and special arrangements (third party billing).

Prohibited when the UNE field on the ASR Form is populated, otherwise optional. 45. GBTN General Exchange Tariff

Options Billing Telephone Number

10 A/N Conditional Identifies the billing telephone number for charges associated with options listed in the GETO field excluding insider wire.

Prohibited when the GETO field is “A”, “E”, “S”, “T”, “U”, “V”, “W”, “Y”, “Z” or not populated, otherwise optional.

46. GCON General Exchange Tariff Option Contact Name

25 A/N Conditional Identifies the name of the person to be contacted for additional information regarding GETO options.

Required when GETO field is “A”, “E”, “M”, “O”, “P”, “R”, “T”, “V”, “Y” or “Z” and the entry in this field is different that the BILLCON field on the ASR Form, otherwise optional.

47. GTEL General Exchange Tariff Option Contact Telephone Number

15 N Conditional Identifies the telephone number of the person named in the GCON field.

Required when GCON is populated, otherwise prohibited.

48. CTX TEL CENTREX Telephone Number

10 N Conditional Identifies the main (listed) telephone number of the CENTREX switch.

Required when the special access service requested terminates in a CENTREX and the UNE field on the ASR Form is not populated, otherwise prohibited.

49. CTX LSTD NM CENTREX Listed Name 25 A/N Conditional Identifies the listed name of the CENTREX customer whose listed number appears in the CTX TEL field.

Optional when the CTXTEL field is populated, otherwise prohibited. 50. WACD1 Work Authorization

Circuit Detail 1 36 A/N Conditional Identifies the first circuit/facility cross-connected in the same wire center.

Required when the service being ordered is cross-connected to an existing service of equal value, otherwise prohibited.



Field Data Description Length Type Usage Valid Entries Notes And Conditions 51. WACD2 Work Authorization

Circuit Detail 2 36 A/N Conditional Identifies the second circuit/facility cross-connected in the same wire center.


52. REMARKS Remarks 124 A/N Optional Identifies a free flowing field which can be used to expand upon and clarify other data on this form.

3.5 ACI – Additional Circuit Information Form Verizon ASR Business Rules v 27


3.5 ACI – Additional Circuit Information Form ACI Form - Specific Data

Field Data Description Length Type Usage Valid Entries Notes And Conditions 1. CCNA Customer Carrier Name

Abbreviation 3 A Required IAC Code

ZZZ = Casual customer or end user billing Identifies the COMMON LANGUAGE IAC code for the customer submitting the ASR and receiving the Confirmation Notice Form (CN). This entry must be identical to the CCNA field on the ASR Form.

2. PON Purchase Order Number 16 A/N Required Identifies the customer’s unique purchase-order or requisition number that authorizes the issuance to this request or supplement. This PON field entry must be identical to the PON field entry on the ASR Form.



18 A/N Optional Identifies the number that may be generated by the provider mechanized systems, pre-assigned to the customer by the provider, or manually assigned by the provider to identify an customer’s request for service.


5. CKR Customer CircuitReference

53 A/N Optional Identifies the circuit number or range of circuit numbers used by the customer.

6. REF NUM Reference Number 4 N Required Identifies the first circuit or segment as a unique number and each additional circuit or circuit segment as a unique number.

The REF NUM is customer assigned and is returned on the confirmation notice to the ordering customer.

Once REF NUM is generated it cannot be changed and is retained through completion of the request.

The values are to be assigned consecutively beginning wit “0002”. The value “0001” is reserved for the associated service specific form.

7. CKTACT Circuit Activity 1 A Conditional K = Cancellation Identifies cancellation activity that is occurring on this circuit per this request.

Required when the circuit quantity is decreasing and the SUP field on the ASR Form is “3” or “4”, otherwise prohibited.



Field Data Description Length Type Usage Valid Entries Notes And Conditions 8. CFA Connecting Facility

Assignment 42 A/N Conditional Identifies the provider carrier system and channel to be used from a Wideband

Analog, High Capacity or Optical Network facility when the customer has assignment control. The Connecting Facility Assignment consists of 5 elements.


On initial facility order (Dedicated Trunk Port or Extended Dedicated Trunk Port), an entry of “NEW” may be used.

Virgules (/) are used as delimiters to separate the all elements of the CFA. All element entries of CFA are left justified with no trailing spaces.

Required when the CFA field on the FGA, Trunking, Transport or EUSA Form is populated, otherwise optional.

9. DIR Directionality 1 N Conditional 1 = High speed group side one 2 = High speed group side two

Identifies the direction of the circuit’s path when it ingresses (enters) on a bi-directional dedicated SONET ring, identified in the PRI ADM field on the Transport or EUSA Form, and the customer has assignment control. Optional when the PRI ADM field on the Transport or EUSA Form is populated, otherwise prohibited.

10. CPT Channel Pair/Timeslot 11 N Conditional Identifies the Synchronous Transport Signal (STS), Virtual Tributary (VT) Group and VT Timeslot of the ring. Required when the ACT field on the ASR Form is “N”, “C” or “T” the FNI field on

the ASR Form is populated and the customer has assignment control, otherwise prohibited.

11. CFAU CFA Use 1 A Conditional Y = Provider carrier system Identifies the CFA as a provider carrier system.

Required when the CFA is a provider carrier system, otherwise prohibited. 12. HBAN High Capacity Channel

Billing Account Number 12 A/N Conditional Valid Billing Account Number

E = Existing Identifies the billing account to which the recurring and non-recurring charges for the original High Capacity channel are billed.

Required when the HBAN field on the FGA, Trunking or Transport Form is populated.


13. CKR1 Customer CircuitReference (T1)

40 A/N Conditional Identifies the circuit number or range of circuit numbers used by the customer for the T1 Transport involved.

Optional in a single ASR environment for LTR requirements. Optional when ordering unbundled dedicated trunk ports. Otherwise prohibited



Field Data Description Length Type Usage Valid Entries Notes And Conditions 14. SCFA Secondary Connecting

Facility Assignment 42 A/N Conditional Identifies the provider carrier system and channel to be used from a Wideband

Analog, High Capacity or Optical Network facility when the customer has assignment control. The Secondary Connecting Facility Assignment consists of 5 elements.


On initial facility order (Extended Dedicated Trunk Port), an entry of “NEW” may be used.

Virgules (/) are used as delimiters to separate all elements of the SCFA. All element entries of the SCFA are left justified with no trailing spaces.

Required the SCFA field on the FGA, Trunking or Transport Form is populated, otherwise optional.

15. SDIR Secondary Directionality 1 N Conditional 1 = High speed group side one 2 = High speed group side two

Identifies the direction of the circuit’s path when it egresses (exits) on a bi-directional dedicated SONET ring, identified in the SEC ADM field on the Transport or EUSA Form, and the customer has assignment control.

Optional when the SEC ADM field on the Transport or EUSA Form is populated, otherwise prohibited.

16. TCIC Trunk CircuitIdentification Code

11 N Conditional A five numeric entry or range of five numeric entries. If the entry ends in 97, 98, 99, or 00, the NS field on the Trunking form, must be populated.

Identifies a specific trunk for which CCS is being performed. The TCIC numeric characters are right justified with leading zeros. The ten thousand

digit should always be zero. Some switch types require customer/ provider negotiation in assigning TCIC codes.

Required on all requests for CCS trunks, otherwise optional. 17. CCEA Cross Connect Equipment

Assignment 60 A/N Conditional Identifies the physical point of termination at a collocation arrangement.

Required when CCEA field on the Trunking or Transport Form is populated, Otherwise optional.

18. REN Ringer Equivalence Number

4 A/N Conditional Identifies the ringer equivalence number of the terminal equipment.

Optional when the ACT field on the ASR Form is “N”, “C” or “T”, otherwise prohibited.

19. JK CODE Jack Code (Secondary Location)

5 A/N Conditional Identifies the standard code for the particular registered or non-registered jack used to terminate the service.

Required when the JS (SECLOC) field is “E” or “N”. Prohibited when the JS (SECLOC) field is not populated. Otherwise optional.

20. PCA Protective Connecting Arrangement (Secondary Location)

5 A/N Conditional Identifies the standard code for a Protective Connecting Arrangement (PCA).

Required when the first position REQTYP on the ASR form is “W”, “S” or “E”, the PCA field on the SALI Form is populated and the PI field on the SALI Form is blank, otherwise prohibited.

21. JK NUM Jack Number (Secondary Location)

2 A/N Conditional Identifies the number of the existing jack used on private end user connections.

Required when the JK CODE (SECLOC) field is populated, otherwise prohibited.



Field Data Description Length Type Usage Valid Entries Notes And Conditions 22. JK POS Jack Position (Secondary

Location) 2 N Conditional Identifies the position in the jack that a particular circuit will occupy.

Required when the JK CODE (SECLOC) field is populated, otherwise prohibited. 23. JS Jack Status (Secondary

Location) 1 A Conditional N = New

E = Existing registered jack D = New demarc F = Existing demarc

Indicates whether the access service is to terminate at a new or existing registered jack or demarc.

Required when the first position REQTYP on the ASR Form is “W”, “S” or “E”, the JS field on the SALI Form is populated and the PI field on the SALI Form is blank, otherwise prohibited.

When UNE field on ASR Form = “Y”, “D” and “F” are the only valid entries. 24. NHNI Non-Hunt Number

Indicator 1 A Conditional Y = Install

R = Remove Identifies a request for installation or removal of the non-hunt number feature in a hunt group.

Optional when the first position of the REQTYP field on the ASR Form is “A” or “W” and the ACT field on the ASR Form is “N”, “C” or “T”, otherwise prohibited.

25. NHN Non-Hunting Number 7 N Conditional Identifies non-hunt telephone numbers in ESS multi-line groups.

Required when the NHNI field on the FGA, WAL or ACI Form is populated and the SUP field on the ASR Form is “3”, otherwise optional.

26. RORD Related Order Number 17 A/N Conditional Identifies a related provider order associated with this service.

Prohibited when the ACT field on the ASR Form is “R”, otherwise optional. 27. S25 Surcharge Status 8 A/N Conditional A = The customer certifies that the access

service is terminated in a device not capable of interconnecting the service with local exchange service…

B = The customer has a blanket exemption certification on file with the provider

C = is applicable to all circuits NA = Not applicable

Identifies whether a surcharge is applicable (non-exempt) or non-applicable (exempt) for the number of voice grade circuits ordered between two customer locations.

Required when the ACT field on the ASR Form is “N” and the surcharge status for a circuit differs from that shown in the S25 field on the related service specific form.

Prohibited when the first position of the REQTYP field on the ASR Form is “A”, “M” or “L”.


28. ER S25 Exempt Reason 1 N Conditional Tells the provider why a circuit is exempt from the special access surcharge.

Optional when the S25 field is “A” or “B”, otherwise prohibited. 29. ECCKT Exchange Company


Circuit Codes (CLCI S/S Codes) – Telephone Number Format

COMMON LANGUAGE Special Service Circuit Codes (CLCI S/S Codes)


COMMON LANGUAGE Facility Codes – (CLFI Codes)

Identifies a provider circuit ID or multiple circuit IDs. The provider assigning this circuit identifier determines the content of this field in




should be compressed to eliminate any spaces.

Required when the ECCKT field on the ASR Form is populated, otherwise optional.



Field Data Description Length Type Usage Valid Entries Notes And Conditions 30. TRN Trunk Number 9 N Conditional 0-9999 Identifies a specific customer trunk number or trunk number range.

Trunk number component in the message format is a variable length, one to four character numeric code and trunk numbers of fewer than 4 characters are left justified with remaining spaces not filled. Leading zeros are not to be used as part of the trunk number. However, the trunk number zero is allowed.

Optional when the first position of the REQTYP field on the ASR Form is “M” and the TCIC field is not populated, otherwise prohibited.

31. SCCEA Secondary Cross Connect Equipment Assignment

60 A/N Conditional Identifies the physical point of termination at the secondary collocation arrangement.

Required when SCCEA field on the Transport Form is populated. Otherwise optional.

32. JK CODE Jack Code (Primary Location)

5 A/N Conditional Identifies the standard code for the particular registered or non-registered jack used to terminate the service.

Required when the JS (PRILOC) field is “E” or “N”. Prohibited when the JS (PRILOC) field is not populated. Otherwise optional.

33. PCA Protective Connecting Arrangement (Primary Location)

5 A/N Conditional Identifies the standard code for a Protective Connecting Arrangement (PCA).

Required when the first position of the REQTYP field on the ASR Form is “E”, the PCA field on the SALI Form is populated and the PI field on the SALI Form is “Y”, otherwise prohibited.

34. JS Jack Status (Primary Location)

1 A Conditional Indicates whether the access service is to terminate at a new or existing registered jack or demarc.

Required when the first position of the REQTYP is “E”, the JS field on the SALI Form is populated and the PI field on the SALI Form is “Y”, otherwise prohibited.

35. WACD1 Work Authorization Circuit Detail 1

36 A/N Conditional Identifies the first circuit/facility cross-connected in the same wire center.


36. WACD2 Work Authorization Circuit Detail 2

36 A/N Conditional Identifies the second circuit/facility cross-connected in the same wire center.


37. SMJK Smart Jack (PRILOC) 1 A Conditional Indicates a need to provide a remote loop back (Smart) capabilities at the premises for the new jack requested for this service.

Optional when the first position of the REQTYP field on the ASR is “E” or “X”, otherwise prohibited.

38. SMJK Smart Jack (SECLOC) 1 A Optional Indicates a need to provide a remote loop back (Smart) capabilities at the premises for the new jack requested for this service.

Prohibited when the UNE field on the ASR Form is populated, otherwise prohibited.



Field Data Description Length Type Usage Valid Entries Notes And Conditions 39. ISDN SEQ. ISDN Sequence 4 N Conditional Identifies the sequencing of all subsequent ISDN PRI DS1’s and the total number of

DS1’s within the hunting arrangement.

Required for ISDN PRI service when the ACT field on the ASR Form is “N” or “C”, the NOR field on the ASR Form is greater than “0” and the SI field on the SALI Form is “C”.

Prohibited when the UNE field on the ASR Form is populated. Otherwise Optional.

40. ASG Access Service Group 6 A/N Optional Identifies the access service group assigned to a particular circuit or group of circuits. This number appears on the billing service charge detail of the Customer Service

Record (CSR) which was forwarded to the customer when the service was installed or when there was a change to the bill resulting from service order activity. The ASG may be provided on the Confirmation Notice Form (CN) by the provider.

If a new ASG is being requested, then the only valid entry is “N”. 41. CRO Complete with Related

Order 17 A/N Conditional Identifies the related provider order number or range of order numbers to be

completed on the same date as this one.

Prohibited when the ACT field on the ASR Form is “R”, otherwise optional. 42. RECCKT Related Exchange

Company Circuit Identification

42 A/N Conditional Identifies the associated Trunking facility being disconnected.

Required when the associated facility does not appear in the RECCKT field on the service specific form or another ACI Form, the ACT field on the ASR Form is “D” and the first position of the REQTYP field on the ASR Form is “M” or “A”, otherwise prohibited.

Required when the unbundled dedicated trunk port does not appear on the RECCKT field on the service specific form or another ACI Form, the ACT field on the ASR Form is “D”, and the first position of the REQTYP field on the ASR Form is “M”


3.6 SALI - Service Address Location Information Verizon ASR Business Rules v 27


3.6 SALI - Service Address Location Information Required when the prefix type of the SECLOC field on the Transport Form is “E”, otherwise prohibited.

SALI Form - Specific Data Field Data Description Length Type Usage Valid Entries Notes And Conditions


3 A Required IAC Code Identifies the COMMON LANGUAGE IAC code for the customer submitting the ASR and receiving the Confirmation Notice (CN) Form. This CCNA field entry must be identical to the CCNA field entry on the ASR Form.

2. PON Purchase Order Number 16 A/N Required Identifies the customer’s unique purchase-order or requisition number that authorizes the issuance to this request or supplement. This PON field entry must be identical to the PON field entry on the ASR Form.



18 A/N Conditional Identifies the number that may be generated by the provider mechanized systems, pre-assigned to the customer by the provider, or manually assigned by the provider to identify a customer’s request for service. This ASR NO field entry must be identical to the ASR NO field entry on the ASR

Form.


5. PG _ of __ Page _ of _ 4 N Required Identifies the page number and total number of pages contained in this transaction. 6. REF NUM Reference Number 4 N Conditional Identifies the unique number assigned to the specific location for which the service

address applies.

Required when the NSL field on the service specific form is populated and the first position of the SECLOC field on the MSL Form is “E”.

Required when the first position of the REQTYP field on the ASR Form is “R” and the first position of the PRILOC field on the ARI Form is “E”.

Otherwise prohibited. 7. PI Primary Location Indicator 1 A Conditional Identifies that the service address location information being provided is a primary

location.

Required when the first position of the PRILOC field on the EUSA, RING or ARI Form is “E”, otherwise prohibited.



Field Data Description Length Type Usage Valid Entries Notes And Conditions 8. EUNAME End User Name 25 A/N Conditional Identifies the end user name associated with the termination location.

Required when the first position of the PRILOC or SECLOC field on the EUSA Form is “E”.

Required when the first position of the SECLOC field on the WAL, Transport, EUSA or MSL Form is “E”.

Required when the first position of the PRILOC or SECLOC field on the ARI Form is “E” and the SPOT (PRI) field on the Ring and/or ARI Forms is not populated.

Optional when the first position of the PRILOC field on the ARI Form is “E” and the SPOT (PRI) field on the Ring and/or ARI Forms is a CLLI Code

Otherwise prohibited. 9. AFT Address Format Type 1 A Conditional A = Rural Rout and / or Box Number

B = Unnumbered C = Provider Assigned House Number D = Descriptive Address

Identifies the format of the address being supplied.

Optional when the SASN field is populated, otherwise prohibited.

10. NCON New Construction 1 A Conditional Y = Yes Identifies that the service address is a new construction.

Optional when the first position of the PRILOC field on the EUSA, Ring and/or ARI Forms is “E”.

Optional when the first position of the SECLOC field on the WAL, Transport, EUSA or MSL Form is “E”.

Otherwise prohibited. 11. SAPR Address Number Prefix 6 A/N Conditional Identifies the prefix for the address number of the service address.

Optional when the SANO field is populated, otherwise prohibited. 12. SANO Address Number 10 A/N Conditional Identifies the number of the service address.

Required when the AFT field is “C” Optional when the SASN field is populated. Otherwise prohibited.

13. SASF Address Number Suffix 4 A/N Conditional Identifies the suffix for the address number of the service address.

Optional when the SANO field is populated, otherwise prohibited. 14. SASD Street Directional Prefix 2 A Conditional N = North

S = South E = East W = West NE = Northeast NW = Northwest SE = Southeast SW = Southwest

Identifies the street directional prefix for the service address.




Field Data Description Length Type Usage Valid Entries Notes And Conditions 15. SASN Street Name 60 A/N Conditional Identifies the street name of the service address.

Required when the first position of the REQTYP field on the ASR Form is “S” or “V”, the ACT field on the ASR From is “N”, “C”, “M” or “T”, the EUNAME field is populated and the SI field is not “C".

Required when the first position of the REQTYP field on the ASR Form is “E” or “X”, the ACT field on the ASR From is “N”, “C”, “M” or “T”, the EUNAME field is populated and the SI field is not “C”.

Required when the first position of the REQTYP field on the ASR Form is “W”, the ACT field on the ASR From is “N”, “M” or “T”, the EUNAME field is populated and the SI field is not “C”.

Required when the LEGACT field on the MSL Form is “N”, “C” or “M”, the EUNAME field is populated and the SI field is not “C”.

Required when the first position of the REQTYP field on the ASR Form is “R”, the ACT field on the ASR From is “N”, “C”, “M” or “T”, the EUNAME field is populated.

Otherwise optional. 16. SATH Street Type 7 A/N Conditional Identifies the thoroughfare portion of the street name of the service address.

Optional when the SASN field is populated, otherwise prohibited. 17. SASS Street Directional Suffix 2 A Conditional N = North

S = South E = East W = West NE = Northeast NW = Northwest SE = Southeast SW = Southwest

Identifies the street directional suffix of the service address.


18. LD1 Location Designator #1 4 A Conditional Identifies additional specific information related to the service address (e.g., building, floor, room).


Required when the ACT field on the ASR Form is “N” or “T” and the SASN field is populated, otherwise prohibited.

19. LV1 Location Value #1 10 A/N Conditional Identifies the value associated with the first location designator of the service address.

Optional when the LD1 field is populated, otherwise prohibited.

Required when the LD1 field is populated, otherwise prohibited. 20. LD2 Location Designator #2 4 A Conditional Identifies additional specific information related to the service address (e.g.,

building, floor, room).

Optional when the SASN field is populated, otherwise prohibited. 21. LV2 Location Value #2 10 A/N Conditional Identifies the value associated with the second location designator of the service

address.

Optional when the LD2 field is populated, otherwise prohibited.



Field Data Description Length Type Usage Valid Entries Notes And Conditions 22. LD3 Location Designator #3 4 A Conditional Identifies additional specific information related to the service address (e.g.,

building, floor, room).

Optional when the SASN field is populated, otherwise prohibited. 23. LV3 Location Value #3 10 A/N Conditional Identifies the value associated with the third location designator of the service

address.

Optional when the LD3 field is populated, otherwise prohibited. 24. CITY City 32 A/N Conditional Identifies the city, village, township, etc. of the service address.

Required when the SASN field is populated, otherwise prohibited. 25. STATE State / Province 2 A Conditional Identifies the state / province of the service address.

Required when the SASN field is populated, otherwise prohibited. 26. ZIP Zip / Postal Code 12 A/N Conditional Identifies the ZIP code, ZIP code + extension or postal code of the service address.

Required when the SASN field is populated, otherwise prohibited. 27. AAI Additional Address

Information 60 A/N Optional Identifies additional location information about the service address.

28. REN Ringer Equivalence Number

4 A/N Conditional Identifies the ringer equivalence number of the terminal equipment.

Prohibited when the ACT field on the ASR Form is “R”. Prohibited when the LEGACT field on the MSL Form is “D”, “M” or “R”. Otherwise optional.

29. JK CODE Jack Code 5 A/N Conditional Identifies the standard code for the particular registered or non-registered jack used to terminate the service.

Required when the JS field is “E” or “N”. Prohibited when the JS field is not populated. Otherwise optional.

30. JK NUM Jack Number 2 A/N Conditional Identifies the number of the existing jack used at service address location.

Required when the JK CODE field is populated, otherwise prohibited. 31. JK POS Jack Position 2 N Conditional Identifies the position in the jack that a particular circuit will occupy.

Required when the JK CODE field is populated, otherwise prohibited.



Field Data Description Length Type Usage Valid Entries Notes And Conditions 32. JS Jack Status 1 A Conditional D = New demarc

E = Existing registered jack F = Existing demarc N = New - constitutes an order for a

registered jack

Indicates whether the access service is to terminate at a new or existing registered jack or demarc.

Prohibited when first position of REQTYP on the ASR Form = “R”. Required when the ACT field on the ASR Form is “N” or “T”, the PCA field is not

populated, the EUNAME field is an end user name and the SI field is not “C”. Required when the LEGACT field on the MSL Form is “N”, the PCA field is not

populated, the EUNAME field is an end user name and the SI field is not “C”. Optional when the ACT field on the ASR Form is “C”, “D” or “M”, the PCA field is

not populated, the EUNAME field is populated and the SI field is not “C”. Optional when LEGACT field on the MSL Form is “C”, “D”, “M” or “K”, the PCA

field is not populated, the EUNAME field is an end user name and the SI field is not “C”.


When UNE field on ASR Form = “Y”, the EUNAME field is populated and the SI field is not “C”, JS entry must indicate demarc.

33. SMJK Smart Jack 1 A Conditional Y = Provide Smart Jack Indicates a need to provide remote loop back (Smart) capabilities, at the premises, for the new jack requested for this service.

Prohibited when the UNE field on the ASR Form is populated, otherwise optional. 34. PCA Protective Connecting

Arrangement 5 A/N Conditional Identifies the standard code for a Protective Connecting Arrangement (PCA).

Prohibited when first position of the REQTYP field on ASR Form is “R”. Required when the ACT field on the ASR Form is “N” or “T”, the JS field is not

populated, the EUNAME field is populated and the SI field is not “C”. Required when the LEGACT field on the MSL Form is “N”, the JS field is not

populated, the EUNAME field is an end user name and the SI field is not “C”. Optional when the ACT field on the ASR Form is “C”, “D” or “M”, the JS field is

not populated, the EUNAME field is populated and the SI field is not “C”. Optional when LEGACT field on the MSL Form is “C”, “D”, “M” or “K”, the JS

field is not populated, the EUNAME field is an end user name and the SI field is not “C”.


When UNE field on ASR Form = “Y”, PCA is prohibited. 35. SI Secondary Point of

Termination Indicator 1 A Conditional C = CLLI Code

N = Narrative Identifies whether the SPOT field contains a CLLI code or a narrative.

Required when SPOT field is populated, otherwise prohibited. 36. SPOT Secondary Point of

Termination 11 A/N Conditional This field may be used to enter a CLLI Code or a narrative format to identify a

physical point of termination at the noted location. This field may contain a frame designation, block identification, etc.

Prohibited when first position of the REQTYP field on the ASR Form is “R”. Required for CENTREX terminations when the ACT field on the ASR Form is “N”,

“C” or “M”. Otherwise optional.

When UNE field on the ASR Form = “Y”, SPOT may not identify a CENTREX. (Since CX TEL and CXT LSTD NM on the Transport Form are shaded for UNEs and they are required when SPOT identifies a CENTREX, SPOT practically can not identify a UNE CENTREX.)



Field Data Description Length Type Usage Valid Entries Notes And Conditions 37. ICOL ICO Location 8 A/N Conditional Identifies the serving wire center of the Independent Company (ICO) for the end user

location.

Optional when the ASC-EC field on the ASR Form and the SASN field are populated, otherwise prohibited.

38. LCON Local Contact 15 A/N Conditional Identifies the local contact name for access. The contact will be made at the time of installation or disconnect for gaining access

to service address location. This is the name of the person to be contacted using the telephone number in the

ACTEL field.

Required when the first position of the REQTYP field on the ASR Form is “W” or “S”, the ACT field on the ASR From is “N”, “M” or “T”, the EUNAME field is populated and the SI field is not “C”.

Required when the first position of the REQTYP field on the ASR Form is “A”, “W”, “S” or “E”, the LEGACT field on the MSL Form is “N”, “C” or “M”, the EUNAME field is populated and the SI field is not “C”.

Required when the first position of the REQTYP field on the ASR Form is “E”, the ACT field on the ASR From is “N”, “C”, “M” or “T”, the EUNAME field is populated and the SI field is not “C”.

Required when the first position of the REQTYP field on the ASR Form is “R”, the ACT field on the ASR From is “N” and the EUNAME field is populated.

Required when the first position of the REQTYP field on the ASR Form is “R”, the ACT field on the ASR From is “C”, the SEGACT field on the RING Form is “N” or “C” and the EUNAME field is populated.

Otherwise optional. 39. ACTEL Access Telephone Number 15 A/N Conditional Identifies the telephone number to be used for the purpose of arranging access to the

service address location for installation purposes. Whenever possible, this number should be working at the service address location.

Required when the LCON field is populated, otherwise optional. 40. AACTEL Alternate Access

Telephone Number 15 N Optional Identifies the alternate telephone number to be used for the purpose of arranging

access to the service address location for installation purposes. 41. ACPGN Access Pager Number 12 A/N Optional Identifies the pager number to be used for the purpose of arranging access to the

service address location for installation purposes. 42. ACPPN Access Pager PIN Number 8 A/N Conditional Identifies the pager PIN number to be used for the purpose of arranging access to the

service address location for installation purposes.

Optional when the ACPGN field is populated, otherwise prohibited. 43 ALCON Alternate Local Contact 15 A/N Optional Identifies the alternate local contact name fo access. 44 ALCON TEL Alternate Local Contact

Telephone Number 14 N Conditional Identifies the telephone number associated with the local contact

Required when the ALCON field is populated, otherwise prohibited.

45 ACC Access Information 45 A/N Conditional Indicates the access instructions for the service address location.

Prohibited when the ACT field on the ASR Form is “R”, otherwise optional. 46 WKTEL Working Telephone

Number 12 A/N Optional Identifies working telephone number at the service address location.

3.7 TQ - Translation Questionnaire Verizon ASR Business Rules v 27


3.7 TQ - Translation Questionnaire Used in VZ in DC, DE, MA, ME, MD, NH, NJ, NY, PA, RI, VA, VT & WV.

TQ Form – Specific Data Field Data Description Length Type Usage Valid Entries Notes & Conditions


3 A Required IAC Code ZZZ = Casual customer or end user billing

Identifies the COMMON LANGUAGE IAC code for the customer submitting the ASR and receiving the Confirmation Notice Form (CN). This entry must be identical to the CCNA field entry on the ASR Form.

2. PON Purchase Order Number 16 A/N Required Identifies the customer’s unique purchase order or requisition number that authorizes the issuance of this request or supplement. This PON field entry must be identical to the PON field entry on the ASR Form.



18 A/N Conditional Identifies the number that may be generated by the provider mechanized systems, pre-assigned to the customer by the provider, or manually assigned by the provider to identify a customer’s request for service. This entry must be identical to the ASR NO field entry on the ASR Form.

If a unique PON is not utilized, the ASR NO field is required on all supplements. If the provider mechanically generates or manually assigns this ASR NO then the initial request will be populated by the ICSC. If pre-assigned the customer will provide. On all Supplements the customer will populate this field if the PON is not unique.


5. TECH CON Customer Technical Contact (Translation)

15 A/N Conditional Identifies the employee or office of the customer or agent that should be contacted on technical matters regarding this TQ. Required when the first position of the TQ field on the ASR Form is “B”, “U”, “D”, “L”, “W”, “T”, “M” or “X”, otherwise prohibited.

6. TEL NO Technical Contact Telephone Number (Translation)

15 N Conditional Identifies the telephone number of the customer technical contact.

Required when the TECH CON (Translation) field is populated, otherwise prohibited.



Field Data Description Length Type Usage Valid Entries Notes & Conditions 7 TTEST TN Translations Test

Telephone Number 10 N Conditional Identifies the ten –digit test telephone number to be used by the provider for call

through testing. Required when the first position of the TQ field on the ASR Form is “B”, “U”, “D”, “T”, “L”, “M”, “W” or “X” and the ACT field on the ASR Form is “N”, the ACTI field on the ASR Form is “C” and the DIR is “1O, “2W” or “2O”. Optional when the first position of the TQ field on the ASR Form is “B”, “U”, “D”, “T”, “L”, “M”, “W” or “X”, the ACTI field on the ASR Form is “B” and the DIR is “1O, “2W” or “2O”.

8 TTEST RESPONSE

Translation Test Response 62 A/N Conditional Identifies the expected announcement response when reaching customer test number. Required when TTEST TH field is populated, otherwise prohibited.

9 REF Referenced Trunk Group 1 A Conditional Identifies the trunk group within the Common Section Matrix. 10 TG ACT Trunk Group Activity 1 A Conditional N = New Trunk Group

C = Trunking section and Common section changes

D = Disconnect Trunk Group R = Trunking section change only M = Interconnection Translation Routing,

Trunking and Common Sections F = Common Section Change only K = Cancel pending activity E = Existing/info Z = OZZ/CKTC requirements

Identifies the translation activity taking place for each trunk group.

Required when the first position of the TQ field on the ASR Form is “B”, “U”, “D”, “L”, “W”, “T”, “M” or “X”, otherwise prohibited.

11 TGTYP Trunk Group Type 1 A Conditional A = Primary High Usage Direct End Office

B = Primary High Usage Tandem C = Intermediate High Usage Direct End

Office D = Intermediate High Usage Tandem E = Final Direct End Office F = Final Tandem G= Alternate Final Tandem H = Alternate Final End Office

Identifies the trunk group routing.

Required when the TGACT field is “N”, “C”, “D”, “R”, “F” or “K” Optional when the TG ACT field is “M” Otherwise prohibited.

When UNE field on ASR Form = “Y”, trunk group type must indicate final.

12 TSC Two Six Code 8 A/N Conditional Identifies a code assigned to a trunk group.

Required when the TG ACT field is “R”, “F”, “C”, “E”, “D” or “M”. Prohibited when the TG ACT field is not populated. Otherwise optional.

13 APON Associated Purchase Order Number

16 A/N Conditional Identifies the PON of the ASR associated with this trunk group.

Required when the Translation Questionnaire is associated with multiple ASRs. Prohibited when the TG ACT field is “E”, “Z” or not populated. Otherwise optional.



Field Data Description Length Type Usage Valid Entries Notes & Conditions 14 DIR Directionality 2 A/N Conditional 1O = One way originating

1T = One way term 2W = Two way 2O = Two way originating 2T = Two way term

Identifies the directionality and use of the trunk group.

Required when the TG ACT field is “N”. Prohibited when the TG ACT field is “E” or “Z”. Otherwise optional.

15 ANI Automatic Number Identification

1 A Conditional B = Install ANI and Flex ANI F = Install Flex ANI (where ANI already

exists) Y = Install ANI R = Remove Flex ANI S = Remove all ANI X = ANI Requirements reflected in EOD

Form

Identifies a request for installation or removal of the automatic number identification feature and/or flexible automatic number identification feature.

Optional when the first position of the TQ field on the ASR Form is “B” or “U” and the TGTYP field is “A”, “C”, “E” or “H” and the DIR field is not “1T” or “2T”.

Optional when the first position of the TQ field on the ASR Form is “D” or “T” and the DIR field is not “1T” or “2T”.

Optional when the first position of the TQ field on the ASR Form is “B” or “U” and the TGTYP field is “A”, “C”, “E” or “H” and the TG ACT field is “C” or “F” and the DIR field is “1T” or “2T”.

Optional when the first position of the TQ field on the ASR Form is “D” or “T” and the DIR field is “1T” or ”2T” and the TG ACT field is “C” or “F”.

Otherwise prohibited. 16 DA ACC Directory Assistance

Access 1 A Conditional Y = Add DA access to this trunk group

R = Remove DA access from this trunk group

Identifies the requirement for terminating traffic to access directory assistance.

Optional when CC field on ASR Form is blank and when the DIR field is “1T”, “2T” or “2W” and the TGTYP field is “B”, “D”, “F” or “G”.

Optional when CC field on ASR Form is blank and the DIR field is “1O” or “2O” and the TG ACT field is “C”, “F” or “K” and the TGTYP field is “B”. “D”, “F” or “G”.

Otherwise prohibited. 17 TK SEQ Trunk Group Hunt

Sequence 2 A Conditional HL = High to low

LH = Low to high LA = Local Arrangement MI = Most idle LI = Least idle CL = Clockwise CC = Counter clockwise

Identifies the trunk group hunt sequence from the customer to the provider.

Required when the TG ACT field is “N” and the DIR field is “2W”, “2O” or “2T”. Prohibited when the TG ACT field is “E” or “Z”. Otherwise optional.

18 TEST ANI Test Automatic Number Identification Indicator (Translation)

1 A Conditional Identifies the requirement to furnish the customer with the test ANI number(s).

Prohibited when the TG ACT field is “E” or “Z”, otherwise optional.



Field Data Description Length Type Usage Valid Entries Notes & Conditions 19 TK SIG Trunk Signaling 2 A Conditional TC = Exchange Access Tandem Signaling

- CCS TA = Exchange Access Tandem Signaling

- MF TS = Traditional Signaling EC = Exchange Access - CCS Signaling EA = Exchange Access - MF Signaling OA = Traditional – Operator Service

Signaling – Inband OB = Traditional – Operator Service

Signaling - Expanded Inband OC = Traditional – Operator Service

Signaling - Multi-Wink OD = MOSS – Modified Operator Service

Signaling – Inband OE = MOSS – Modified Operator Service

Signaling - Expanded Inband OF = MOSS – Modified Operator Service

Signaling - Multi-Wink OG = EAOSS – Exchange Access

Operator Service Signaling – Inband OH = EAOSS – Exchange Access

Operator Service Signaling – Expanded Inband

OI = EAOSS - Exchange Access Operator Service Signaling - Multi-Wink

OJ = CCS/SS7 - Operator Service Signaling - Inband

OK = CCS/SS7 - Operator Service Signaling – Expanded Inband

OL = CS/SS7 - Operator Service Signaling - Multi-Wink

Identifies the originating protocol and signaling of a FGD or local trunk group. An entry of “TS” is valid only on trunk groups used for 800/900 traffic and is based

on provider tariffs/contracts/practices. An entry of “TC” or “TA” indicates the requirement for network signaling

information necessary to route calls from a provider end office through an access tandem.

Entries of “TC” or “TA” are prohibited when the entry in the TGTYP field is “B”, “D”, “F” or “G”.

Required when the first position of the TQ field on the ASR Form is “D”, “T”, “L”, “M”, “W” or “X” and the TG ACT field is “N” or “M”.

Optional when the first position of the TQ field on the ASR Form is “D” or “T” and the TG ACT field is “D”, “C”, “F” or “K”.


20 SAC NON SAC Non-Conforming 1 A Conditional Y = Route non-conforming SAC traffic to this trunk group

R = Remove non-conforming SAC traffic from this trunk group

Indicates traditional signaling is required for originating SAC traffic from non-conforming end offices to this trunk group.

Prohibited when the TG ACT field is “E” or “Z”, otherwise optional.

21 O-T Operator Transfer 1 A Conditional Y = Route Operator Transfer Traffic to this trunk group

R = Remove Operator Transfer Traffic from this trunk group

Identifies the FGD Trunk Group on which operator transfer traffic will be routed.

Prohibited when the first position of the TQ field on the ASR Form is not “D” or “T”.

Prohibited when the first position of the TQ field on the ASR Form is “D” or “T” and the TG ACT field is “E” or “Z”.

Otherwise optional.



Field Data Description Length Type Usage Valid Entries Notes & Conditions 22 OVLP Overlap Outpulsing 1 A Conditional Y = Add Overlap Outpulsing to this trunk

group R = Remove Overlap Outpulsing from this

trunk group

Indicates the requirement for Overlap Outpulsing on FGD.

Prohibited when the TKSIG field is “EC” or “OC”. Prohibited when the first position of the TQ field on the ASR Form is not “D” or

“T”. Prohibited when the first position of the TQ field on the ASR Form is “D” or “T”

and the TG ACT field is “E” or “Z”. Otherwise optional.

23 CTO Cut Through 1 A Conditional Y = Add Cut-Through traffic to this trunk group

R = Remove Cut-Through traffic from this trunk group

Identifies the FGD trunk group on which Cut-Through traffic will be routed.

Optional when the first position of the TQ field on the ASR Form is “D”, “T” or “W” and CC field on ASR Form is not populated, otherwise prohibited.

24 OSAC Other Service Access Code

3 N Conditional 710 = Federal Government Service Access Code

Identifies a unique Service Access Code.

Prohibited when the TG ACT field is “E” or “Z”. Prohibited when CC field on the ASR Form is populated. Prohibited when the WST field on the ASR Form is populated. Otherwise optional.

25 NDO Number of Digits Outpulsed

2 N Conditional 0 -10 Identifies the number of digits to be provided to the customer.

Optional for FGB requests when the ACT field on the ASR Form is “N” or “C” and the first position of the TQ field on the ASR Form is “B” or “U” and the TG ACT field is not “E”.

Optional when the WST field on the ASR Form is populated, the ACT field on the ASR Form is “N” or “C”, the first position on the TQ field on the ASR Form is “W” or “X” and the TG ACT field is not “E”.

Optional when the CC field on the ASR Form is populated, the ACT field on the ASR Form is “N” or “C”, the first position of the TQ field on the ASR Form is “L” or “M” and the TG ACT field is not “E”.

Otherwise prohibited. 26 CSP Carrier Selection

Parameter 1 A Conditional Y = Install

R = Remove Identifies originating calls placed from a customer’s presubscribed end user.

Optional for FGD CCS trunks when the ACT field on the ASR Form is “N” or “C” and the CC field on the ASR is not populated, otherwise prohibited.

27 CPN Calling Party Number 1 A Conditional Y = Install R = Remove

Identifies a request for the delivery of a ten-digit telephone number of the calling party originating calls within the LATA to a customer’s location.

Optional for CCS trunks when the ACT field on the ASR Form is “N” or “C”, otherwise prohibited.

28 CIP Carrier Identification Parameter

1 A Conditional Y = Install R = Remove

Identifies a request for the CIP option which is used to carry the CIC of the carrier in the CCS7 call setup protocol (Initial Address Message) thorough the originating and subsequent networks.

Optional for CCS trunks when the CC field on ASR Form is not populated, otherwise prohibited.

29 FACT Feature Activity (ALT REF)

1 A Conditional A = Add feature R = Remove feature C = Change feature E = Existing/informational

Identifies the activity associated with the ALT REF field for this trunk group.

Required when the ALT REF field is populated, otherwise prohibited.



Field Data Description Length Type Usage Valid Entries Notes & Conditions 30 ALT REF Alternate Routing Trunk

Group Reference 8 A/N Conditional A

B C D Valid TSC

Identifies the REF or TSC of an existing trunk group or a new trunk group to which overflow traffic will be routed.

Required when the TGTYP field is “A”, “B”, “C”, “D” or “H” and the TG ACT field is “N”, “C”, “F” or “M”, otherwise optional.

31 FACT Feature Activity (950-XXXX)

1 A Conditional A = Add Feature R = Remove Feature

Identifies the activity associated with the “950-XXXX” field entry for this trunk group.

Required when the 950-XXXX is populated, otherwise prohibited. 32 950-XXXX 950 Access Number 4 N Conditional Identifies the 950 access number(s) to be used on a FGB or FGD service.

Required when the first position of the TQ field on the ASR Form is “B” or “U” and the TG ACT field is “N”.

Prohibited when the TG ACT field is “E”. Prohibited when the first position of the TQ field on the ASR Form is “E”, “L”, “M”

“W”, “X” or “C”. Otherwise optional.

33 BRAND Branding 2 A Conditional Indicates whether a customer wants a definable announcement to callers prior to placing them in a queue or connecting them to an available operator or automated operator system.

Optional when the TRFTYP field on the Trunking Form is “DA”, “DC”, “NA”, “ND” or “OP”, otherwise prohibited.

When the UNE field on the ASR form is “Y”, branding is identified using the Operator Service Translation Questionnaire (OSTQ).

34 ANNC Announcement 40 A/N Conditional Identifies the customer’s announcement to callers prior to them being placed in a queue or connecting them to an available operator or automated operator system.

Required when the first position of the BRAND field is “Y” or “C” and the second position of the BRAND field is blank, otherwise prohibited.

35 CCW Carrier Connect Wink Validation

1 A Conditional Y = Access tandem will send carrier connect wink to CLEC

N = Access tandem will not send carrier connect wink to CLEC

Identifies a carrier connect wink sent by the access tandem to the CLEC on International Calls originated by the customer.

Required when the TRFTYP field on the Trunking Form is “AL”, “AM”, “TM” or “TS” and the first position of the TQ field on ASR Form is “L” or “W”, otherwise prohibited.

36 CIC Carrier Identification Code 4 N Conditional Identifies the uniform access code associated with the FGD and local service.

Required when the first position of the TQ field on the ASR Form is “D” or “T” and any TG ACT field is not “F”, “D” or “K”, otherwise optional.

37 ACIC Additional Carrier Identification Code

4 N Conditional Identifies the additional uniform access code(s) associated with the FGD service.

Prohibited when the first position of the TQ field on ASR Form is “L”, “M”, “W” or “X”, otherwise optional.

38 CCLASS Carrier Classification 2 A Conditional IC = Interexchange Customer (domestic) IN = International Carrier CC = Consolidated Carrier (domestic and

international

Identifies the classification of the ordering Interexchange customer.

Required when the first position of the TQ field on the ASR Form is “D” or “T” and any TG ACT field is not “F”, “D” or “K”.

Prohibited when the first position of the TQ field on the ASR Form is “C”, “L”, “M” “W”, or “X”.

Otherwise optional.



Field Data Description Length Type Usage Valid Entries Notes & Conditions 39 INTRA Intrastate IntraLATA

Traffic 1 A Conditional Y = Yes authorized, route traffic

N = Do not route traffic Indicates whether the customer is authorized by the appropriate state regulatory authority to carry Intrastate IntraLATA traffic.

Required when any TG ACT field is “N”, “C” or “R” and CC and/or WST field on the ASR Form is not populated.

Optional when any TG ACT field is “K”. Otherwise prohibited.

40 INTER Intrastate InterLATA Traffic

1 A Conditional Y = Yes authorized, route traffic N = Do not route traffic

Indicates the customer is authorized by the appropriate state regulatory authority to carry Intrastate InterLATA traffic.

Required when any TG ACT field is “N”, “C” or “R” ” and CC and or WST field on the ASR Form is not populated.

Optional when any TG ACT field is “K”. Otherwise prohibited.

41 COIN EA Coin Equal Access 1 A Conditional Y = Yes N = No

Identifies the customer as a participant in Coin Equal Access in the end offices(s) or access tandem affected by this request.

Required when the first position of the TQ field on the ASR Form is “D” or “T” and any TG ACT field is not “F”, “D” or “K”.

Prohibited when the first position of the TQ field on ASR Form is “C”, “L”, “M”, “W” or “X”.

Otherwise optional. 42 ATP Access Transport

Parameter 1 A Conditional Y = Install

R = Remove Identifies a request for the ATP option which is used to carry information transmitted from an ISDN user through the CCS network.

Optional for CCS trunks, otherwise prohibited. 43 BCR3 Bearer Capability Routing

3.1 KHZ 8 A/N Conditional A through D

Valid TSC Identifies the REF or TSC of the trunk group carrying traffic with a bearer capability indicating 3.1 KHZ.

Required when exception routing by 3.1 KHZ bearer capability is ordered or changed, otherwise prohibited.

44 BCR5 Bearer Capability Routing 56 KB

8 A/N Conditional A through D Valid TSC

Identifies the REF or TSC of the trunk group carrying traffic with a bearer capability indicating 56 KB.

Required when exception routing by 56 KB bearer capability is ordered or changed, otherwise prohibited.

45 BCR6 Bearer Capability Routing 64 KB

8 A/N Conditional A through D Valid TSC

Identifies the REF or TSC of the trunk group carrying traffic with a bearer capability indicating 64 KB.

Required when exception routing by 64 KB bearer capability is ordered or changed, otherwise prohibited.



Field Data Description Length Type Usage Valid Entries Notes & Conditions 46 M64 Multiple 64 Clear Channel

Capability 2 A/N Conditional 1st position

1 = HO - 384 Kbps call 2 = H11 - 1536 Kbps call 3 = Multirate - multiples of 64 Kbps 4 = Multirate H11 5 = Multirate Floating 6 = Multirate Flexible 7 = Multirate H0

2nd position B = Best Fit F = First Fit

Identifies the allocation scheme and trunk selection option when multiple 64 clear channel capability is ordered.

Required when ordering multiple 64 clear channel capability, otherwise prohibited.

47 GLARE Glare Master 1 A Conditional A = Customer B = Provider C = CIC Option

Identifies the “glare master”.

Required when the TK SEQ field is populated, otherwise prohibited.

48 Routing Matrix Identifies the routing requirements by ANI Information Digits and service prefix. 48a. ANID Automatic Number

Identification Digits Routing

3 A/N Conditional ALL, 00, 01, 06, 07, 20, 27, 29, 52, 61, 70, 93

48b. SVCPRE Service Prefix 5 A/N Conditional ALL, 1+, 0+, 00, 011, 01, 1+700, 0+700, 800, 1+900, 0+900, 1+500, 0+500, 0-L, 411, LPDA, 0+L.

49 Routing Exception Matrix Identifies the exceptions by Line Class of Service to the routing requirements listed in the Routing Matrix.

49a. ANIDEXCP Automatic NumberIdentification Digits Routing Exception

2 N Conditional ALL, 00, , 01, 06, 07, 20, 27, 29, 52, 61, 70, 93

49b. LCS Line Class/Service 15 A/N Conditional49c. SVCPREREM Service Prefix 5 A/N Conditional ALL, 1+, 0+, 00, 011, 01, 1+500, 0+500,

1+700, 0+700, 800, 1+900, 0+900, 0-L, 411, LPDA, 0+L

50 REMARKS Remarks 124 A/N Conditional Identifies a free flowing field which can be used to expand upon and clarify other data on this form.

Required in MA, ME, NH, NY, RI & VT when 1st position TQ on ASR = “L” and ordering new trunk group associated with UNE dedicated trunk port.

Remarks must indicate unbundled switch Line Class Code (LCC) or Line Treatment Group (LTG) and originating NPA / NXX associated with LCC/LTG.

If field is not populated, a normal dialing plan will be provided. 51 CIC Carrier Identification Code 4 N Conditional Type Entry

950-XXXX = XXXX 10XXX = XXX 101XXXX = XXXX

The SAC NXX CODE ACTIVITY section is completed for SAC or NXX activation or deactivations only. A combination of SAC activations on the same TQ is based on provider tariff/practices.

Required when the first position of the TQ field on the ASR Form is “S”, “U” or “T”, otherwise prohibited.



Field Data Description Length Type Usage Valid Entries Notes & Conditions 52 ORD LEV Ordering Level 12 A/N Required Position 1

A = State/Province Level B = LATA Level C =Tandem Level D = End Office Level

Position 2-12 Valid 2 character State/Prov postal code Valid 3 character LATA designation Valid 11 character CLLI code

Identifies the scope of the required code activity.


53 00Y 00Y Code Option 1 A Conditional Y = Yes N = No

Indicates the customer’s capability of accepting an 00Y code for identification of cross boundary tributary SAC traffic.

Required when the first position of the SAC ACT field is “Y”. Required when the first position of the SAC ACT field is “N” and the provider

provides the 00Y code option. Optional when the first position of the SAC ACT field is “A” or “R”. Otherwise prohibited.

54 TEST ANI Test Automatic Number Identification Indicator-(SAC)

1 A Conditional Y= Yes N = No

Identifies the requirement to furnish the customer with the test ANI number.

Optional when the TEST TN field is populated, otherwise prohibited.

55 TECH CON Customer Technical Contact (SAC)

15 A/N Conditional Identifies the employee or office of the customer or agent that should be contacted on technical matters regarding this TQ.

Required when the first position of the TQ field on the ASR Form is “S”. Optional when the first position of the TQ field on the ASR Form is “U” or “T”. Otherwise prohibited.

56 TEL NO Technical Contact Telephone Number (SAC)

15 N Conditional Identifies the telephone number of the customer Technical Contact.

Required when the TECH CON (SAC) field is populated, otherwise prohibited.

57 SAC ACT Service Access Code Activity

2 A/N Conditional 1st Position A = Add (NXX Code Activation) D = Discontinue SAC Service K = Cancel Pending Activity N = Establish SAC Service R = Remove (NXX Code Deactivation) Y = Change 00Y Option Only

2nd Position 1st numeric of SAC

Identifies the activity taking place for SAC NXX services.


58 APON Associated Purchase Order Number

16 A/N Conditional Identifies the PON of the ASR associated with this activity.

Required when Translation Questionnaire is associated with multiple ASRs. Prohibited when SAC ACT is not populated. Otherwise optional.

59 TEST TN Test Telephone Number 4 N Conditional Identifies the last four digits of the test telephone number to be used by the provider.

Required when the first position of the SAC ACT field is “A” or “N”. Optional when the first position of the SACACT field is “Y” or “K”. Otherwise prohibited.



Field Data Description Length Type Usage Valid Entries Notes & Conditions 60 NXX NXX Information 3 N Conditional Identifies the NXX codes affected by this translation questionnaire.

Required when the first position of the SAC ACT field is “N”, “A”, “R” or “D”. Optional when the first position of the SAC ACT field is “K”. Otherwise prohibited.

61 TEST RESPONSE

Test Response 62 A/N Conditional Identifies the expected announcement response when reaching the customer test number.

Required when the TEST TN field is populated, otherwise prohibited. 62 REMARKS Remarks (SAC) 124 A/N Optional Identifies a free flowing field which can be used to expand upon and clarify other

data on this form. 63 LRN G Location Routing Number

Global 10 N Conditional Positions 1 - 3 = NPA

Positions 4 - 6 = NXX Positions 7 10 = Any four digit numeric

assigned by the customer

Identifies a single number used to uniquely identify a switch that has ported numbers, is used to route a call to the switch and applies to all NPA/NXX/X associated with this request.

This LRN applies to all NPA/NXX/X associated with this request.

Optional when the ACT field on the ASR Form is “N”, the DIR field is “1O’, “2W”, or “2O”,the C.NPA/NXX field is populated and the LRN field is blank.

Optional when the ACT field on the ASR Form is “C”, the C.NPA/NXX field is populated and the LRN field is blank and first position of REQTYP field on the AsR Form is “M”.

Otherwise prohibited 64 TECH CON Customer Technical

Contact (NPANXX/X) 15 A/N Conditional Identifies the employee or office of the customer or agent that should be contacted

on technical matters regarding this TQ.

Required when the first position of the TQ field on the ASR Form is "C". Optional when the first position of the TQ field on the ASR Form is "M" or "X". Otherwise prohibited.

65 TEL NO Technical Contact Telephone Number (NPANXX/X)

15 A/N Conditional Identifies the telephone number of the customer technical contact.

Required when the TECH CON (NPANXX/X) field is populated, otherwise prohibited.



Field Data Description Length Type Usage Valid Entries Notes & Conditions 66 C.NPA/NXX Local Exchange Customer

NPA/NXX 7 N Conditional NPA/NXX = 10000 Block

NPA/NXX/X = 1000 Block Identifies the NPA/NXX or NPA/NXX/X blocks that resides in the customer’s switch/node for the local exchange service being provided.

For screening of incoming traffic to VZ: Identifies the NPA-NXX codes that reside in a CLEC switch node for the purpose of establishing incoming screening at a VZ TOPS switch when the CLEC has ordered OS/DA service from VZ. This field will indicate that only calls originating from the NPA-NXX's that reside in the CLEC switch should be allowed to complete through the VZ TOPS switch.

For routing of traffic originating from an unbundled VZ switch: Identifies the local NPA/NXX codes to be routed to the trunk group requested on dedicated trunk port(s).

Required when the first position of the TQ field on the ASR Form is “C”, “M” or “X”.

Required when the first position of TQ field orn the ASR Form is “E”, the first position of the REQTYP field on the ASR Form is “L”, the AT field on the ASR Form is “C” and the PCU field on the Trunking Form is “1”, “3”, “5”, “7”, “B”, “C”, or “D”.

Required when the UNE field on the ASR Form is populated and the TRFTYP field on the Trunking Form is “DA”, “DC” or “OP”.

Required when ordering new trunk groups or changing routing adding local NPA/NXX codes to existing trunk groups associated with UNE dedicated trunk ports or EDTP Type 1* or EDTP Type 2* and the TRFTYP field on the Trunking Form is “LL”.

Otherwise prohibited. * where available

67 LRN Location RoutingNumber

10 N Conditional Positions 1 - 3 = NPA Positions 4 - 6 = NXX Positions 7 10 = Any four digit numeric

assigned by the customer

Identifies a number used to uniquely identify a switch that has ported numbers and is used to route a call to the switch.

Optional when the ACT field on the ASR Form is “N”, the DIR field is “1O”, “2W”, or ‘2O”, the C.NPA/NXX field is populated and the LRN G field is blank.

Optional when the ACT field on the ASR Form is “C”, the C.NPA/NXX field is populated and the LRN G field is blank and first position of REQTYP field is “M”.


3.8 C/NR - Clarification / Notification Form Verizon ASR Business Rules v 27

3.8 C/NR - Clarification / Notification Request Form Used by Verizon to request clarification and/or provide information regarding the customer’s request.

C/NR Form – Specific Data Field Data Description Length Type Usage Valid Entries Notes & Conditions



Identifies the COMMON LANGUAGE IAC code for the customer submitting the ASR and receiving the Clarification / Notification Request Form. The CCNA field entry must be identical to the CCNA field entry on the ASR Form.

2. PON Purchase Order Number 16 A/N Required Identifies the customer’s unique purchase order or requisition number that authorizes the issuance of the request or supplement. The PON field entry must be identical to the PON field entry on the ASR Form.

3. VER Version Identification 2 A/N Conditional Identifies the customer version number. The VER field entry must be identical to the VER field entry on the ASR Form.


Number 18 A/N Optional Identifies the number that may be generated by the provider mechanized systems,

pre-assigned to the customer by the provider, or manually assigned by the provider to identify a customer’s request for service. The ASR NO field entry must be identical to the ASR NO field entry on the ASR Form.

5. ICSC Interexchange Customer Service Center

4 A/N Required Identifies the provider service center requesting clarification or providing notification. The ICSC field entry must be identical to the ICSC field entry on the ASR Form.

6. D/TSENT Clarification/Notification Date and Time Sent

17 A/N Required U.S Standard Metric Format

Identifies the date and time that the Clarification/Notification Request Form is sent by the provider.

7. INIT Initiator 15 A/N Conditional Identifies the initiator as specified on the ASR Form by the customer. The INIT field entry must be identical to the INIT field entry on the ASR Form.

Required when the INIT field on the ASR Form is populated, otherwise prohibited. 8. TEL NO Telephone Number 15 N Conditional Identifies the telephone number of the initiator as specified on the ASR Form by the

customer. The TEL NO field entry must be identical to the TEL NO (INIT) field entry on the ASR Form.

Required when the INIT field is populated, otherwise prohibited 9. AP REP Provider Contact 15 A/N Required Identifies the provider employee handling this service request.

10. AP REP TEL Provider Contact Telephone Number

15 N Required Identifies the telephone number of the provider employee handling this request.

11. AP REP EMAIL Provider Contact Electronic Mail Address

60 A/N Optional Identifies the electronic mail address of the provider rep (AP REP) contact.



Field Data Description Length Type Usage Valid Entries Notes & Conditions 12. CNT Clarification/Notification

Type 1 A Required A = ASR (PON) Completion

B = Jeopardy C = Previous C/NR Clear D = Remarks E = Errors F = Jeopardy with errors K = Provider Initiated Cancellation

Identifies the type of clarification/notification being sent to the customer. An entry of “A” indicates the ASR (PON) has been marked as completed by the

provider, service has been activated and billing may commence. An entry of “B” indicates the ASR (PON) has a condition which impacts the critical

date(s). The use of “B” is only applicable after the ASR has been confirmed. An entry of “C” indicates that all the conditions that would have required

clarification from the customer have been satisfied. This could have occurred as the result of a SUP being received or through verbal negotiations between the customer and provider that determined a SUP is not required. The use of “C is only applicable after a previous C/NR has been confirmed.

An entry of “D” indicates that the C/NR is informational only and no response is required.

An entry of “E” indicates that one or more ERROR TAG fields are populated on the C/NR.

An entry of “F” indicates the combination of “B” and “E” conditions. An entry of “K” indicates the ASR has been cancelled by the provider due to no

response to a previously issued C/NR. 13. C/NR VER Clarification/Notification

Version 2 N Required 01 - 99 Identifies the provider’s C/NR version number.

The initial C/NR VER for an ASR (PON) will be 01 and increments as subsequent C/NRs are generated.

14. SUPR SUP Requested 1 A Conditional Y = Yes Identifies that the provider expects a supplement ASR in response to this C/NR.

Required when one or more SUPI fields are populated, otherwise prohibited. 15. CRDD Customer Response Due

Date 10 A/N Conditional U.S. Standard

Metric Format Identifies the date on which the provider expects a response from the customer regarding the Clarification/Notification Request.

Required when the SUPR field is populated, otherwise optional. 16 CD Completion Date 10 A/N Conditional U.S. Standard

Metric Format Identifies the date on which the ASR (PON) was completed by the provider, service was activated and billing may commence.

Required when the CNT field is “A”, otherwise prohibited. 17. SUP Indicator 1 A Conditional Y = Yes Identifies that the provider expects a supplement ASR to correct the condition

identified at the line level on the C/NR. If this field is blank, the clarification/notification for this line item is information

only.

Optional when the CNT field is “B”, “E” or “F”, otherwise prohibited.

SUPI



Field Data Description Length Type Usage Valid Entries Notes & Conditions 18. RCODE Reason Code 2 A/N Conditional 1A = Inter Office Facility Shortage

1B = Scheduling/Work Load 1C = Customer Not Ready 1D = No loop available 1E = End User Not Ready 1F = Provider Missed Appointment 1G = No Access to End User Premises 1H = Central Office Freeze 1J = Special Construction 1K = Natural Disaster (Flood, etc.) 1L = Frame Due Time Cannot be Met 1M = Due Date Cannot Be Met 1N = Due Date and Frame Due Time

Cannot be Met 1P = Other 1Q = Assignment Problem 1R = Customer Could Not Be Reached 1S = Building Not Ready, Customer Will

Advise 1T = Pole At Site Not Set 1W = Entrance Facilities Required 1X = Not Technically Feasible 1Y = No Central Office Equipment

Available 1Z = Other Exchange Company Not

Ready

Identifies the reason the provider has placed this service request in jeopardy. This indicates the ASR (PON) has a condition that impacts the critical date(s) and is

only applicable after the ASR has been confirmed.

19. RDET Reason Code Detail 60 A/N Conditional Provides a detail description associated with the reason code. Required when the RCODE field is “1P”. Optional when the RCODE field is populated with a value other than “1P”. Otherwise prohibited.

20. REMARKS Remarks 225 A/N Optional Identifies a free flowing field that can be used to send a detailed message to the customer or to expand upon and clarify other data on the C/NR Form. This field should not be used in lieu of any existing error process. The field will be limited to one per ASR transmission. The entire ASR should be reviewed to ensure that all discrepancies have been included on the request.

21. REF NUM Reference Number 4 N Conditional Identifies the unique number assigned to a specific circuit or circuit segment for which an error has been identified.

Required when the VC NUM field is blank and the associated ERROR TAG field is populated, otherwise prohibited.

22. VC NUM Virtual Connection Number

4 N Conditional Identifies the unique number assigned to a specific virtual circuit for which an error has been identified.

Required when the REF NUM field is blank and the associated ERROR TAG field is populated, otherwise prohibited.



Field Data Description Length Type Usage Valid Entries Notes & Conditions 23. ERROR TAG Error Tag 12 A/N Conditional SVC-ADDR = Service Address

ASOG Data Element Unique Error Code

Identifies a specific field or unique identification scheme for the error message provided in the ERROR MESSAGE field. The valid entry “SVC-ADDR” indicates one or more data elements associated with

the service address on the SALI Form is in error. In lieu of “SVC-ADDR”, the specific ASOG data element may be used (e.g., CITY) as stated in Note 2 the following note.

Identifies the name of the field (e.g., NCI) in error as shown in the ASOG. Identifies an error condition that cannot be mapped to a specific ASOG data element.

Required when the CNT field is “E” or “F, otherwise prohibited. 24. ERROR

MESSAGE Error Message 120 A/N Conditional Provides a descriptive text of an error condition identified by the provider.

Required if the ERROR TAG field is populated, otherwise prohibited.


3.9 CN - Confirmation Notice Form Verizon ASR Business Rules v 27

3.9 CN - Confirmation Notice Form The confirmation notice indicates that Verizon has received a complete Access Service Request and has issued a service order to provide service as ordered.

CN Form – Specific Data Field Data Description Length Type Usage Valid Entries Notes & Conditions



Identifies the COMMON LANGUAGE IAC code for the customer submitting the ASR and receiving the Confirmation Notice Form (CN). The CCNA field entry must be identical to the CCNA field entry on the ASR Form.

2. PON Purchase Order Number 16 A/N Required Identifies the customer’s unique purchase order or requisition number that authorizes the issuance of the request or supplement. The PON field entry must be identical to the PON field entry on the ASR Form.

3. VER Version Identification 2 A/N Conditional Identifies the customer’s version number. The VER field entry must be identical to the VER field entry on the ASR Form.


Number 18 A/N Conditional Identifies the number that may be generated by the provider mechanized systems,

pre-assigned to the customer by the provider, or manually assigned by the provider to identify a customer’s request for service. The ASR NO field entry must be identical to the ASR NO field entry on the ASR Form.

Required on all supplements when PON is not unique. Otherwise optional.

5. SPA Special Action Indicator 2 A/N Optional An indicator used to identify an order being sampled for quality control purposes. 6. RT Response Type 1 A Required B = Billing Account Number Correction

D = Design and Order Confirmation F = Form Order Confirmation S = Service Request Confirmation

Identifies the type of response issued by the provider.

INIT Initiator 15 A/N Required Identifies the initiator as specified on the ASR Form by the customer. 8. ICSC Interexchange Customer

Service Center 4 A/N Required Identifies the provider service center requesting clarification or providing

notification. 9. CD/TSENT Confirmation Date and

Time Sent 17 A/N Required U.S Standard

Metric Format Identifies the date and time that the CN is sent by the provider/ASC/EC.

10. AP REP Provider Contact 15 A/N Required Identifies the provider employee handling this request. 11. AP REP TEL Provider Contact

Telephone Number 15 N Required Identifies the telephone number of the provider employee handling this request.

12. EMAIL Electronic Mail Address 60 A/N Optional Identifies the electronic mail address of the provider rep (AP REP) contact. 13. AP DSGCON

TEL Provider design Contact Telephone Number

15 A/N Conditional Identifies the telephone number of the provider employee, office or agent that should be contacted on design/engineering matters.

Required when the RT field is “D” and this entry is different from the AP REP TEL field, otherwise prohibited.

Required when ASR NO is pre-assigned.

7.



Field Data Description Length Type Usage Valid Entries Notes & Conditions 14. APF DSGCON

TEL Provider Facility Design Contact Telephone Number

15 A/N Identifies the telephone number of the provider employee, office or agent that should be contacted on design/engineering matters for switched access facilities.

Required when the RT field is “D”, any FCKT field is populated and the entry is different from the Provider DSGCON TEL field, otherwise prohibited.

15. AP OCO Provider Operations Control Office

15 A/N Conditional Identifies the telephone number of the provider office for installation coordination at time of DOC issuance for the facility.

Required when the RT field is “D”, otherwise prohibited. 16. APF OCO Provider Facility

Operations Control Office 15 A/N Conditional Identifies the telephone number of the provider office for installation coordination at

time of DOC issuance for switched access facilities.

Required when the RT field is “D” and any FCKT field is populated, otherwise prohibited.

17. AP MCO Provider Maintenance Control Office

15 A/N Conditional Identifies the telephone number of the provider office for maintenance trouble reporting at time of DOC issuance.

Required when the RT field is “D” and the information in this field is different from the AP OCO field, otherwise prohibited.

18 PIA Provider Initiated Activity 1 N Optional 1 = Provider Initiated ECCKT(s) Change 2 = Provider Initiated Due Date Change 3 = ECCKT and Due Date Change 4 = Other (Clarify in Remarks)

Indicates a provider initiated confirmation that is not in response to a customer Access Service Request supplement. This may signal to the customer that additional investigation is needed to determine

internal process impacts. 19. APF MCO Provider Facility

Maintenance Control Office

15 A/N Conditional Identifies the telephone number of the provider office for maintenance trouble reporting at time of DOC issuance.

Required when the RT field is “D”, any FCKT field is populated and the information is different from the APF OCO field, otherwise prohibited.

20. PROVINT Provisioning Interval 3 N Conditional Identifies the number of work days which could be required to complete this request (contingent upon facility and work force availability) if this request were a firm order as of today's date.

Required when the ACT field on the ASR Form is “N”, “C”, “D”, “M” or “T”, the RT field is “S” and the second position of the TQ field on the ASR Form is not “N” or “X”.

Prohibited when the second position of the TQ field on the ASR Form is “N”. Prohibited when the RT field is “D”. Otherwise optional.

21. PROJECT Project Identification 16 A/N Conditional Identifies the project number associated with this request. Use of this field includes: relating multiple ASR's, previously negotiated orders, etc. The provider may initiate the project identification and provide this to the customer

who will populate the field when submitting additional and/or supplement ASR Forms associated with this project.

Prohibited when RT field is “B”, otherwise optional. 22. CNO Case Number 12 A/N Optional Identifies the quotation tracking number assigned by the provider in response to a

provisioning arrangement inquiry, e.g., diversity.

Conditional



Field Data Description Length Type Usage Valid Entries Notes & Conditions 23. APP Application Date 10 A/N Conditional U.S. Standard

Metric Format Identifies the date that the customer gives the provider an Access Service Request with sufficient information to allow a service order to be issued.

Prohibited when the RT field is “B” or “S”. Optional when the RT field is “F” and the second position of the TQ field on the

ASR Form is “N” or “X”. Otherwise required.

24. DLRD Design Layout Report Date

10 A/N Conditional U.S. Standard Metric Format

Identifies the date the Design Layout Report (DLR) is to be forwarded to the customer.

Required when the RT field is “F”, the ACT field on the ASR Form is “N”, “C”, “D”, “M” or “T”, the first position of the REQTYP field on the ASR Form is not “Q”, the second position of the TQ field on the ASR Form is not “N” or “X” and the RTR field on the ASR Form is “S” or “1-10.”

Prohibited when the RT field is “B”, “D” or “S”. Prohibited when the ACT field on the ASR Form is “R”. Prohibited when the second position of the TQ field on the ASR Form is “N” or “X”. Otherwise optional.

25. CDLRD Confirming Design Layout Report Date


Identifies the date that the Confirming Design Layout Report (CDLR) is to be received at the provider design control office.

Required when the RT field is “F”, the ACT field on the ASR Form is “N”, “C”, “D”, “M” or “T”, the first position of the REQTYP field on the ASR Form is not “Q”, the second position of the TQ field on the ASR Form is not “N” or “X” and the RTR field on the ASR Form is “1-10.”

Prohibited when the RT field is “B”, “D” or “S”. Prohibited when the ACT field on the ASR Form is “R”. Prohibited when the second position of the TQ field on the ASR Form is “N” or “X”. Otherwise optional.

26. PTD Plant Test Date 10 A/N Conditional U.S. Standard Metric Format

Identifies the date the provider schedules the overall testing of the requested service to start. When this field is populated and the PPTD field on the ASR Form is populated,

those entries must be the same.

Required when the PPTD field on the ASR Form is populated. Prohibited when the RT field is “B” or “S”. Otherwise optional.

27. DD Due Date 10 A/N Conditional U.S. Standard Metric Format

Identifies the date the service order generated from this Access Service Request is due to be completed.

Prohibited when the RT field is “B” or “S”. Optional when the RT field is “F” and the second position of the TQ field on the

ASR Form is “N” or “X”. Otherwise required.



Field Data Description Length Type Usage Valid Entries Notes & Conditions 28. EBD Effective Bill Date 10 A/N Conditional U.S. Standard

Metric Format Identifies the date billing is to cease for disconnect activity whenever the billing date is different from the due date.

Required when the RT field is “F”, the ACT field on the ASR Form is “D”, the first position of the REQTYP field on the ASR Form is not “Q” and the EBD field is different than the DD field.

Prohibited when the RT field is “B” or “S”. Otherwise optional.

29. BAN Billing Account Number 12 A/N Conditional Valid Billing Account Number NB = Multi-EC Non-billing Provider

Identifies the billing account to which the recurring and non-recurring charges for this request will be billed.

Required when the ACT field on the ASR Form is “N”, “C”, “D”, “M” or “T” and the RT field is “D” or “F”, otherwise optional.

30. SWC Serving Wire Center 11 A/N Conditional Identifies the CLLI Code of the local or alternate serving central office of the customer location or primary location.

Required when the RT field is “D” or “F”, the ACT field on the ASR Form is “N” or “T”, the first position of the REQTYP field on the ASR Form is not “Q” and the second position of the TQ field on the ASR Form is not “N” or “X”.

Optional when the first position of the REQTYP field on the ASR Form is “W”. Prohibited when the RT field is “B”. Prohibited when the second position of the TQ field on the ASR Form is “N” or “X”. Prohibited when the UNE field on the ASR Form is populated. Otherwise optional.

31. SC Special Construction 1 A Y = Required Indicates that special construction is required to fill the request.

Prohibited when the the RT field is “B”, otherwise optional. 32. FACTL Facility Access Customer

Terminal Location 11 A/N Conditional Identifies the CLLI Code of the customer’s facility terminal location for the DS1

facility being ordered.

Required when the RT field is “D” and the FACTL field on the Trunking Form is populated, otherwise prohibited.

33. NC1 Network Channel Code (T1)

4 A/N Conditional NC Code Identifies the network channel code for the T1 transport involved. The network channel code describes the channel provided by the provider from the customer's ACTL to a provider central office.

Required when the RT field is “D” and the NC1 field on the FGA or Trunking Form is populated, otherwise prohibited.

34. NC Network Channel Code 4 A/N Conditional NC Code Identifies the network channel code for the circuit involved.

Required when the RT field is “D”, otherwise prohibited. 35. NCI Network Channel Interface

Code 5 - 12 A/N Conditional NCI Code Identifies the electrical conditions on the circuit at the ACTL.

Required when the RT field is “D”, otherwise prohibited. 36. EC VER Exchange Carrier Version 2 N Required Identifies the provider's version.

For corrections and SUPs, the entry will increment. For resends, the entry will not increment.

Conditional



Field Data Description Length Type Usage Valid Entries Notes & Conditions 37. SECLOC Secondary Location 11 A.N Conditional CLLI Code Identifies the terminating end of the circuit, a provider end office or the first point of

switching for the circuit being provided.

Required when the first position of the REQTYP field on the ASR Form is “V” or “X” and the CLLI Code has been assigned by the provider, otherwise prohibited.

38. FDLRD Facility Design Layout Report Date


Identifies the date that the trunk facility DLR is to be forwarded to the customer for the digital interface(s) identified in the FCKT field.

Required when the ACT field on the ASR Form is “N”, the FCKT field is populated and the RT field is “F”.

Prohibited when the RT field is “B”, “D” or “S”. Otherwise optional.

39. FCDLRD Facility Confirming Design Layout Report Date

10 Conditional Metric Format

Identifies the date that the Confirming Design Layout Report (CDLR) is to be received at the provider design control office for the trunk facility.

Required when the ACT field on the ASR Form is “N”, the FCKT field is populated and the RT field is “F” and the customer has requested a CDLR..

Prohibited when the RT field is “B”, “D” or “S”. Otherwise optional.

40. Facility Plant Test Date 10 A/N Conditional U.S. Standard Metric Format

Identifies the date the provider schedules the overall testing of the trunk facility.

Required when the ACT field on the ASR Form is “N”, the FCKT field is populated and the RT field is “D” or “F”.

Required when the PFPTD field on the ASR Form is populated. Prohibited when the RT field is “B” or “S”. Otherwise optional.

41. FDD Facility Due Date 10 A/N Conditional U.S. Standard Metric Format

Identifies the due date of the digital interface(s) identified in the FCKT field.

Required when the FCKT field is populated, otherwise prohibited. 42. CIWBAN Corrected Inside Wire

Billing Account Number 16 A/N Conditional Identifies the Billing Account Number for charges associated with inside wire.

Required when a correction to the IWBAN Field on the ASR Form is needed, otherwise prohibited.

43. ECSPC Exchange Company Signaling Point Code

11 A/N Conditional Identifies the provider's signaling point in a CCS network.

Required when the first position of the REQTYP field on the ASR Form is “L”. Required for CCS trunk requests when the second position of the TQ field on the

ASR Form is not “N” or “X”. Otherwise prohibited.

44. FNI Fiber Network Identification

13 A/N Conditional Identifies all services associated with a particular fiber based network.

Required when the FNI field on the ASR Form is “N”, otherwise optional.

45 Route Index 6 A/N Conditional Identifies the routing index to be used by the provider’s switching equipment to forward/port the provider’s telephone number to the customer’s non-RCF trunk group.

Required when the TRFTYP field on the Trunking Form is “RI” or “PN”, otherwise prohibited.

A/N U.S. Standard

FPTD

Valid FNI

RTI



Field Data Description Length Type Usage Valid Entries Notes & Conditions 46 TNSC Transit Network Signaling

Code 2 N Optional Identifies the OZZ/CKTC code that is assigned to trunk groups from a provider

tandem to an ACTL. 47 REMARKS Remarks 124 A/N Optional Identifies a free flowing field which can be used to expand upon and clarify other

data on this form. 48. ECCKT Exchange Company


Circuit Codes (CLCI S/S Codes) – Telephone Number Format.

COMMON LANGUAGE Special Service Circuit Codes (CLCI S/S Codes) - Serial Number Format.


COMMON LANGUAGE Facility Codes – (CLFI Codes)

Identifies a provider circuit ID or multiple circuit IDs. The provider assigning this circuit identifier determines the content of this field in


When the UNE field on the ASR form is populated, and the customer is ordering an unbundled multiplexer, the COMMON LANGUAGE Format of the transport facility for the high speed and low speed sides may be different.



should be compressed to eliminate any spaces. The format and structure of the field is defined by ANSI standards.

Required when the RT field is “D” or “F”, the ACT field on the ASR Form is “N”, “C”, “D”, “M” or “T”, the first position of the TQ field on the ASR Form is not “S” Prohibited when the RT field is “B”

Otherwise optional. 49. NHN Non-Hunting Number 7 N Conditional Identifies non-hunt telephone numbers in ESS multi-line groups.

Only valid for FGA and WAL service.

Required when the RT field is “D” or “F”, the ACT field on the ASR Form is “N” or “C”, the first position of the REQTYP field on the ASR Form is “A” or “W”, and the NHNI field on the FGA or WAL Form is populated.

Prohibited when the RT field is “B”. Otherwise optional.

50 REF NUM Reference Number 4 N Conditional This field is used to identify a circuit or circuits segment on a request for multiple circuits. REF NUM may be used by the customer and the provider for control and tracking

purposes during the provisioning process. For each circuit segment the REF NUM must be unique beginning with “0001” and

incrementing by one for each additional circuit segment.

Required when the RT field is “D” or “F”, the first position of the REQTYP field on the ASR Form is not “Q” and the second position of the TQ field on the ASR Form is not “N” or “X”.




Field Data Description Length Type Usage Valid Entries Notes & Conditions 51 FCKT Facility Circuit

Identification 53 A/N Conditional Identifies the Facility ID which has been assigned to the digital interface being

designed to accommodate the request for switched access lines or trunks. The format of this field is defined COMMON LANGUAGE standards.

Required when the NC1 field on the FGA or Trunking Form is populated, and the RT field is “D” or “F”.

Prohibited when the first position of the LTP field on the ASR Form is “A”, “G”, “H”, “I”, “J” or “K”.

Prohibited when the LTP field on the ASR Form is not populated. Prohibited when the RT field is “B”. Otherwise optional.

52 HBAN High Capacity Channel Billing Account Number

12 A/N Valid Billing Account Number NB = Multi-EC Non-billing provider

Identifies the billing account to which the recurring and non-recurring charges for the original High Capacity channel are billed.

Required when the HBAN is different than the HBAN provided on the request or is not populated with “E”, and the ASC-EC field on the ASR Form is blank.

Optional when the ASC-EC field on the ASR Form is populated and the UNE field on the ASR Form is not populated.

Otherwise prohibited. 53 NK Network Configuration 1 A Optional A = On-net configuration

B = Off-net configuration C = On-net SECLOC/On-net SWC

(Single) D = On-net SECLOC/On-net SWC

(Diverse

Identifies that the request was provided in an on-net or off-net configuration.

54 MPA Multiple Provider Arrangement

1 A Optional Y = Yes Identifies when the provider utilizes another provider’s facilities to support the overall customer request in a non-meetpoint environment.

55 CKR Customer Circuit Reference

53 A/N Conditional Identifies the circuit number or range of circuit numbers being used by the customer.

Required when the CKR field on the ASR Form is populated, otherwise prohibited. 56 CKR1 Customer Circuit

Reference (T1) 53 A/N Conditional Identifies the circuit number or range of circuit numbers used by the customer for the

T1 Transport involved.

Required when the CKR1 field on the FGA Form or Trunking and ACI Forms are populated, otherwise prohibited.

57 LEGNUM Multipoint Leg Number 6 A/N Conditional Identifies the number assigned by the customer to this leg (segment) of a multipoint circuit.

Required when the LEGNUM field on the MSL Form is populated and the RT field is not “B”, otherwise prohibited.

58 TRN Trunk Number 9 A/N Conditional 0-9999 Identifies a specific customer trunk number or trunk number range.

Required when the RT field is “D” or “F” and the TRN field on the Trunking and/or ACI Form is populated, otherwise prohibited.

59 TCIC Trunk Circuit Identification Code

11 A/N Conditional Identifies a specific trunk for which CCS is being performed as assigned by the customer.

Required when the RT field is “D” or “F” and the TCIC field on the Trunking and/or ACI Form is populated, otherwise prohibited.

Conditional



Field Data Description Length Type Usage Valid Entries Notes & Conditions 60 ORD Order Number 17 A/N Conditional Identifies the provider service order number for the requested service.

Required when the RT field is “D” or “F”. Prohibited when the RT field is “B”. Otherwise optional

61 FORD Facility Order Number 17 A/N Conditional Identifies the provider service order number for the trunk facility.

Required when the ACT field on the ASR Form is “N” or “D”, the FCKT field is populated and the RT field is “D” or “F”.

Prohibited when the RT field is “B” or “S”. Otherwise optional.

CRO Complete with Related Order Number

17 A/N Conditional Identifies the related provider order number or range of order numbers to be completed on the same date as the Access Service Request due date.

Prohibited when the RT field is “B”, otherwise optional. 6 ASG 6 A/N Optional Identifies the access service group assigned to a particular circuit or group of

circuits. This number appears on the Customer Service Record (the billing service charge

details) which is forwarded to the customer. 64 SSWC SECLOC Serving Wire

Center 11 A/N Conditional Identifies the CLLI Code of the local or alternate serving central office for the

secondary location.

Required when the RT field is “D” or “F”, the ACT field on the ASR Form is “N””. Prohibited when the RT field is “B”. Prohibited when the UNE field is populated. Otherwise optional.

65 TSC Two Six Code 8 A/N Conditional Identifies a code assigned to a trunk group or CCS Link Set. The code is unique to each established trunk group or CCS Link Set.

Required when the ACT field on the ASR Form is “N”, the first position of the REQTYP field on the ASR Form is “M” and the RT field is “D” or “F”.


TRKQTY Trunk Quantity 5 N Conditional Identifies the numbe

The total of all TRKQTY entries must equal the entry in the QTY field on the ASR Form when that entry is in trunks.

Required when the RT field is “D” or “F”, the ACT field on the ASR Form is “N”, “C”, “D” or “M”, the UNIT field on the ASR Form is populated and the first position of the REQTYP field on the ASR Form is “M”.

Prohibited when the RT field is “B”. Prohibited when the UNIT field on the ASR Form is not populated. Otherwise optional.

67 DTN Discrete Telephone Number

10 A/N Conditional Identifies the telephone number assigned in some central offices (e.g., 1/1A ESS) to provide call routing.

Prohibited when the RT field is “B”, otherwise optional.

62

Access Service Group

66

r of trunks provided to the customer for service ordered in trunks or busy hour minutes of capacity.



Field Data Description Length Type Usage Valid Entries Notes & Conditions 68 EQPDESG 10 A/N Conditional A code used to identify a piece of equipment at the customer location indicated in the

ACTL field.

Required when the RT field is “D” and the FACDESG field is not populated, otherwise prohibited.

69 RELAY RACK 10 Conditional Identifies the floor, aisle, and bay/cabinet where the equipment indicated in the EQPDESG field is located.

Required when the RT field is “D” and the EQPDESG field is populated, otherwise prohibited.

70 UNIT Unit 6 A/N Conditional Identifies the number assigned to a panel, shelf or case within the bay/cabinet indicated in the RELAY RACK field.

Required when the RT field is “D” and the RELAY RACK field is populated, otherwise prohibited.

71 FACDESG Facility/Cable Designation 5 A/N Conditional Identifies the facility/cable used in provisioning this service at the customer location indicated in the ACTL field.

Required when the RT field is “D” and the EQPDESG field is not populated, otherwise prohibited.

72 FACTYPE Facility Type 6 Conditional Identifies the type of facility indicated in the FACDESG field.

Required when the RT field is “D” and the FACDESG field is populated, otherwise prohibited.

73 CHANNEL Channel 11 Conditional Identifies specific connection points (i.e., channel, jack, slot, pin or pair) within the facility or cable indicated in the FACDESG field.

Required when the RT field is “D” and the FACDESG field is populated, otherwise prohibited.

74 FCHAN Facility Channel 5 A/N Conditional Identifies the specific channel(s) within the DS1 facility indicated in the FCKT field.

Required when the RT field is “D” and the FCKT field is populated, otherwise prohibited.

75 RTE MI Route Miles 8 A/N Conditional K = Kilofeet C = Kilometer

Identifies the total length of all facilities (A to Z) used to provide this service. The entry in this field is reflected in miles (M), Kilofeet (K) or Kilometers (C).

Required when the RT field is “D” and the ACT field on the ASR Form is “N” or “T”. ption

Otherwise prohibited. 76 Miscellaneous Information 15 A/N Conditional This field contains various information required for circuit installation; e.g. frame,

block terminations, presubscribed settings, plant options. Frame information may include bay, panel, jack, floor and aisle for DSX-1 and

DSX-3 terminations.

Optional when the RT field is “D”, otherwise prohibited. VC NUM Virtual Connection

Number 4 N Conditional Identifies each VC as a unique number.

Equipment Designation

Relay Rack A/N

A/N

A/N

M= Miles

O al when RT field is “D” and the ACT Field on the ASR Form is “C”.

MISC

77

Required when the first position of the REQTYP field on the ASR Form is “V” or “X” and the VC NUM on the VC Form is populated, otherwise prohibited.



Field Data Description Length Type Usage Valid Entries Notes & Conditions 78 DLCI Data Link Connection

Identifier 4 N Conditional Identifies the logical connection address between the provider switch and the circuit.

Required when the first position of the REQTYP field on the ASR Form is “V” or “X” and the BSC field on the Transport or EUSA Form is “F” and the VST field on the VC Form is “A”, “C” or blank and the NVC field on the Transport or EUSA Form is populated, otherwise prohibited.

VPI Virtual Path Identifier 4 N Conditional Identifies the logical connection address between the provider’s switch and the circuit for the virtual path requested.

Required when the first position of the REQTYP field on the ASR Form is “V” or “X”, the BSC field on the Transport or EUSA Form is “C”, the VST field on the VC Form is “B” or blank, and the VCACT field on the VC Form is “D”, “N” or “R”.

Optional when the first position of the REQTYP field on the ASR Form is “V” or “X”, the BSC field on the Transport or EUSA Form is “C”, the VST field on the VC Form is “B” or blank and the VCACT field on the VC Form is “K”.

Otherwise prohibited. VCI Virtual Circuit Identifier 5 N Conditional Identifies the logical co

Optional when the first position of the REQTYP field on the ASR Form is “V” or “X”, the BSC field on the Transport or EUSA Form is “C” the VST field on the VC Form is “A”, “C” or blank, the VCACT field on the VC Form is “K” and the CTYP field on the VC Form is not “P”.

81 RECCKT Related Exchange Company Circuit Identification

53 A/N

82 RDLCI Related Data Link Connection Identifier

4 N Conditional Identifies the logical connection address between the provider’s switch and the related circuit.

Required when the first position of the REQTYP field on the ASR Form is “V” or “X”, the BSC field on the Transport or EUSA Form is “F”, the VST field on the VC Form is blank, and the NVC field on the Transport or EUSA Form is populated.

Required when the first position of the REQTYP field on the ASR Form is “V” or “X”, the BSC field on the Transport or EUSA Form is “C”, the VST field on the VC Form is “B”, and the NVC field on the Transport or EUSA Form is populated.


79

80 nnection address between the provider switch and the circuit for the virtual circuit requested.

Required when the first position of the REQTYP field on the ASR Form is “V” or “X”, the BSC field on the Transport or EUSA Form is “C”, the VST field on the VC Form is “A”, “C” or blank, the VCACT field on the VC Form is “D”, “N” or “R” and the CTYP field on the VC Form is not “P”.

Otherwise prohibited. Identifies the related prConditional ovider physical circuit ID against which the VC activity is requested.

Required when the RECCKT field on the VC Form is not populated, otherwise prohibited.



Field Data Description Length Type Usage Valid Entries Notes & Conditions 83 RVPI Related Virtual Path

Identifier 4 N Conditional Identifies the logical connection address between the provider’s switch and the

related circuit for the virtual path requested.

Required when the first position of the REQTYP field on the ASR Form is “V” or “X”, the BSC field on the Transport or EUSA Form is “C”, the VST field on the VC Form is blank, the VCACT field on the VC Form is “D”, “N” or “R” and the RECCKT field on the VC Form is populated.

Prohibited when the first position of the REQTYP field on the ASR Form is “V” or “X”, the BSC field on the Transport or EUSA Form is “F”, and the VST field on the VC Form is blank.

Prohibited when the first position of the REQTYP field on the ASR Form is “V” or “X”, the BSC field on the Transport or EUSA Form is “C”, and the VST field on the VC Form is “B”.

Prohibited when the first position of the REQTYP field on the ASR Form is not “V” or “X”.

Otherwise optional. 84 RVCI 5 N Conditional Identifies the logical connection address between the provider’s switch and the

related circuit for the virtual circuit requested.

Required when the first position of the REQTYP field on the ASR Form is “V” or “X”, the BSC field on the Transport or EUSA Form is “C”, the VST field on the VC Form is blank, the VCACT field on the VC Form is “D”, “N” or “R” and the RECCKT field on the VC Form is populated.

Prohibited when the first position of the REQTYP field on the ASR Form is “V” or “X”, the BSC field on the Transport or EUSA Form is “F”, and the VST field on the VC Form is blank.

Prohibited when the first position of the REQTYP field on the ASR Form is “V” or “X”, the BSC field on the Transport or EUSA Form is “C”, and the VST field on the VC Form is “B”.

Prohibited when the first position of the REQTYP field on the ASR Form is not “V” or “X”.

Otherwise optional. 85 PG _ of _ Page _ of _ 4 N Identifies the page number and total number of pages contained in this transaction.

Related Virtual Circuit Identifier

Required


4.1 Appendix A: Type of Change Matrix Verizon ASR Business Rules v 27


4 Appendix

4.1 Appendix A: Type of Change Matrix

4.1.1 Version 26 - 03/10/03 Update Business Rules for ASR 27, effective September 13, 2003; to incorporate ATIS OBF ASOG 27 changes, and the associated Verizon business rules.

4.2 Appendix B: Changes Matrix Verizon ASR Business Rules v 27


The following is a high level summary of the changes made in Section 3, ASR Forms, associated with Version Number 27. An asterisk in the Field Name column indicates changes made are, partially or wholly due to changes in the ASOG.

Form

4.2 Appendix B: Changes Matrix

4.2.1 Summary of Changes

Field # Field Name Change

ASR 3 VER Field changed to required per ASOG 8 UNE Changed ASOG note remove REQTYP “Q” 19 LUP Changed ASOG note 21 REQTYP Removed “Q” per ASOG 23 ACTI New field and ASOG notes 24 QSA Renumbered from this field to end increment by one Per ASOG remove “Q” from Usage note 25 WST Changed ASOG usage note 27 RTR Changed ASOG usage note 30 TQ Added ASOG valid entry and ASOG notes 47 UNIT Changed ASOG usage note 48 PIU Changed ASOG usage note 51 ECCKT Changed ASOG usage note 52 QTY Changed ASOG usage note 56 BIC Telephone

Number Change form 12 to 10 numerics(excluding 2 preprinted hyphens)

60 ACTL Changed ASOG usage note 63 APOT Changed ASOG usage note 85 TEL NO Change form 17 to 15 numerics(excluding 3 preprinted hyphens) 90 TEL NO Change form 17 to 15 numerics(excluding 3 preprinted hyphens) 91 INIT FAX NO Change form 12 to 10 numerics(excluding 2 preprinted hyphens) 99 DSGCON Changed ASOG usage note 100 TEL NO Change form 17 to 15 numerics(excluding 3 preprinted hyphens) 101 DSG FAX NO Change form 12 to 10 numerics(excluding 2 preprinted hyphens) and changed ASOG usage note



Form Field # Field Name Change 103 STREET Changed ASOG usage note 104 DRC Changed ASOG usage note 106 FLOOR Changed ASOG usage note 107 ROOM Changed ASOG usage note 108 CITY Changed ASOG usage note 109 STATE Changed ASOG usage note 110 ZIP CODE Changed ASOG usage note 113 TEL NO Change form 17 to 15 numerics(excluding 3 preprinted hyphens) 115 TEL NO Change form 12 to 10 numerics(excluding 2 preprinted hyphens) Trunking 8 TTT Changed ASOG usage note 14 TRFTYP Changed ASOG usage note 17 CIC Changed ASOG usage note 36 HBAN Changed ASOG usage note 40 NC1 Changed ASOG usage note 41 FIMPTEL Change form 17 to 15 numerics(excluding 3 preprinted hyphens) 51 REL TSC Changed ASOG usage note 55 CGAP Changed ASOG valid entry of numeric to 1-999 (Shaded) 63 SSPC Changed ASOG field length from 15 to 11 (Shaded) 65 PCU Added two new ASOG valid entries (Shaded) Transport 1 CCNA Changed ASOG valid entry 29 SECLOC Changed ASOG valid entry notes 45 GBTN Change form 12 to 10 numerics(excluding 2 preprinted hyphens) (shaded) 47 GTEL Change form 17 to 15 numerics(excluding 3 preprinted hyphens) (shaded) 48 CTX TEL Change form 12 to 10 numerics(excluding 2 preprinted hyphens) (shaded) ACI No Changes



Form Field # Field Name Change SALI 39 ACTEL Change form 17 to 15 numerics(excluding 3 preprinted hyphens) 40 AACTEL Change form 17 to 15 numerics(excluding 3 preprinted hyphens) 43 ALCON New ASOG field 44 ALCONTEL New ASOG field 45 ACC Renumbered Field 46 WKTEL Change form 12 to 10 numerics(excluding 2 preprinted hyphens) (shaded) AND Renumbered Field TQ 6 TEL NO Change form 17 to 15 numerics(excluding 3 preprinted hyphens) 7 DB TEST TN Remove field per ASOG 7 TTEST TN New ASOG field 8 TTEST RESP New ASOG field 9 REF Renumbered all fields following increment by one 32 950-XXXX Changes ASOG note(Shaded) 38 CCLASS Re-named AOG Field 56 TEL NO Change form 17 to 15 numerics(excluding 3 preprinted hyphens) 63 LRN G Changed ASOG notes 65 TEL NO Change form 17 to 15 numerics(excluding 3 preprinted hyphens) 66 C.NPA/NXX Changed ASOG notes 67 LRN Changed ASOG notes C/NR 8 TEL NO Change form 17 to 15 numerics(excluding 3 preprinted hyphens) 10 AP REP TEL Change form 17 to 15 numerics(excluding 3 preprinted hyphens) CN 11 AP REP TEL Change form 17 to 15 numerics(excluding 3 preprinted hyphens) 13 AP DSGCON Change form 17 to 15 numerics(excluding 3 preprinted hyphens)

4.2 Verizon ASR Business Rules v 27

Appendix B: Changes Matrix


Form Field # Field Name Change TEL

14 APF DSGCONTEL

Change form 17 to 15 numerics(excluding 3 preprinted hyphens)

15 APF OCO Change form 17 to 15 numerics(excluding 3 preprinted hyphens) (Shaded) 16 AP OCO Change form 17 to 15 numerics(excluding 3 preprinted hyphens) (Shaded) 17 AP MCO Change form 17 to 15 numerics(excluding 3 preprinted hyphens) (Shaded) 19 APF MCO Change form 17 to 15 numerics(excluding 3 preprinted hyphens) (Shaded) 24 DLRD Changed ASOG notes 25 CDLRD Changed ASOG notes 28 EBD Changed ASOG notes 30 SWC Changed ASOG notes 31 SC Changed ASOG notes 38 FDLRD Changed ASOG notes 39 FCDLRD Changed ASOG notes 45 ECAPC Removed field 45 RTI Renumbered all field following decrease by one 48 ECCKT Changed ASOG notes 49 NHN Changed ASOG notes 50 REF NUM Changed ASOG notes 64 SSWC Changed ASOG notes 65 TSC Changed ASOG notes 66 TRKQTY Changed ASOG notes 67 DTN Changed ASOG notes

Verizon Asr Feilds

Documents

Transcript of Verizon Asr Feilds