VENETIAN BLIND SILKY...Available with 30 colors of oxidized titanium slats to resolve the dirt....

17
VENETIAN BLIND SILKY

Transcript of VENETIAN BLIND SILKY...Available with 30 colors of oxidized titanium slats to resolve the dirt....

Page 1: VENETIAN BLIND SILKY...Available with 30 colors of oxidized titanium slats to resolve the dirt. Available with 30 colors of fluorine slats to remove the dirt easily. - “Flexible

VENETIAN BLIND S I L K Y

Page 2: VENETIAN BLIND SILKY...Available with 30 colors of oxidized titanium slats to resolve the dirt. Available with 30 colors of fluorine slats to remove the dirt easily. - “Flexible

Off-white

Beige Dark brown

Soft silver

Black

R-101White

R-102Ivory

R-103Pale pink

R-104Pale orange

R-105Pale yellow

R-106Pale green

R-107Pale blue

R-108Beige

R-109Linen

R-110Cocoa brown

R-111Amber

R-112Ice gray

R-113Black

■ New style of aluminum slats and fabric tapeThis is a new style combining aluminum slats 25mm wide and ladder tape 10mm wide.Ladder tape reduces light penetrating through the holes on the slats.Normal ladder cord type is also available.

■ First Chain type in the Silky SeriesAdoption of the Chain type makes this series perfectly suitable for coordination with other Chain type products, including roll screens.*A speed adjustment function is also equipped, which enables the slats to roll down slowly, even if you release your hand from the chain.

■ Product height can be adjusted easilyHeight adjustment function is standard for “SILKY CERT”.The product height can be shortened by a level equivalent to 1 pitch using a flat-braid screwdriver or coin, which gives reassurance to customers even after the installation.

■ Rich Variety of ColorsA rich variety of slats is available, including “thermal barrier coating” that improves air cooling efficiency in the summer with enhanced optical reflection, “oxidized titanium coating” that enables light to break down dirt, and “fluorine coating” for easy removal of dirt.

Slat307colors

Ladder Tape13colors

Chain5colors

19955 Pattern

STRUCTURE & PART NAME■ Ladder Tape Type ■ Ladder Cord Type

Part Name and Material

■ Available Sizes(Both width and height are available in 10mm units.)

Material

Stainless alloy, Plastic

Extruded aluminum

Plastic

Plastic

Corrosion-resistant aluminum alloy

Plastic

Plastic

Plastic

Polyester

Polyester

Polyester

Extruded aluminum

Plastic

Plastic

Color

Plastic portion: Clear

Similar to slat color (Size: 40.0mm in width x 44.8 mm in height)

Similar to slat color

Similar to slat color

307 colors excluding punching

Clear

5 colors

13 colors

Similar to slat color

Similar to slat color

Similar to slat color (Size: 24.7mm in width x 11.5mm in height)

Similar to slat color

Clear

10

11

12

13

14

Mounting Bracket

Head Rail

Head Rail Cap

Operation Unit

Slat

Slat Holder

Plastic Ball Chain

Safety Chain

Ladder Tape

Ladder Cord

Lift Cord

Bottom Rail

Bottom Rail Cap

Tape Holder

Part Name

Specifications

Product Width

Product Height

Max. Area

Operation Method

Ladder Tape Type

300~2500mm

Ladder Cord Type

300~3000mm

500~3000mm

7m2

Chain operation

(Unit: mm)

■ Color Variation

■ Ladder Cord Colors *To reduce the light penetration. ■ Chain Colors

Raising, lowering and operating/closing are all done with a single endless plastic chain. Simple one-touch pulling action will lower the blind all the way down.Versatile maneuverability ensures a smooth operation from straight down movement of Bottom Rail during tilting prevents light from coming through and improved shielding ability.

SILKY CERT (25mm)

Smooth and excellent maneuverability

World’s

first

VENETIAN BLIND S I L K Y

66

58.5

Pro

duc

t he

ight

Cha

in le

ngth

= P

rod

uct

heig

ht –

20

21.3

25

14

29.5

❶ ❷❸

❹ ❹❺❻

❼❽

❼❽

❾ 1011

121314

Page 3: VENETIAN BLIND SILKY...Available with 30 colors of oxidized titanium slats to resolve the dirt. Available with 30 colors of fluorine slats to remove the dirt easily. - “Flexible

Off-white

Beige Dark brown

Soft silver

Black

R-101White

R-102Ivory

R-103Pale pink

R-104Pale orange

R-105Pale yellow

R-106Pale green

R-107Pale blue

R-108Beige

R-109Linen

R-110Cocoa brown

R-111Amber

R-112Ice gray

R-113Black

■ New style of aluminum slats and fabric tapeThis is a new style combining aluminum slats 25mm wide and ladder tape 10mm wide.Ladder tape reduces light penetrating through the holes on the slats.Normal ladder cord type is also available.

■ First Chain type in the Silky SeriesAdoption of the Chain type makes this series perfectly suitable for coordination with other Chain type products, including roll screens.*A speed adjustment function is also equipped, which enables the slats to roll down slowly, even if you release your hand from the chain.

■ Product height can be adjusted easilyHeight adjustment function is standard for “SILKY CERT”.The product height can be shortened by a level equivalent to 1 pitch using a flat-braid screwdriver or coin, which gives reassurance to customers even after the installation.

■ Rich Variety of ColorsA rich variety of slats is available, including “thermal barrier coating” that improves air cooling efficiency in the summer with enhanced optical reflection, “oxidized titanium coating” that enables light to break down dirt, and “fluorine coating” for easy removal of dirt.

Slat307colors

Ladder Tape13colors

Chain5colors

19955 Pattern

STRUCTURE & PART NAME■ Ladder Tape Type ■ Ladder Cord Type

Part Name and Material

■ Available Sizes(Both width and height are available in 10mm units.)

Material

Stainless alloy, Plastic

Extruded aluminum

Plastic

Plastic

Corrosion-resistant aluminum alloy

Plastic

Plastic

Plastic

Polyester

Polyester

Polyester

Extruded aluminum

Plastic

Plastic

Color

Plastic portion: Clear

Similar to slat color (Size: 40.0mm in width x 44.8 mm in height)

Similar to slat color

Similar to slat color

307 colors excluding punching

Clear

5 colors

13 colors

Similar to slat color

Similar to slat color

Similar to slat color (Size: 24.7mm in width x 11.5mm in height)

Similar to slat color

Clear

10

11

12

13

14

Mounting Bracket

Head Rail

Head Rail Cap

Operation Unit

Slat

Slat Holder

Plastic Ball Chain

Safety Chain

Ladder Tape

Ladder Cord

Lift Cord

Bottom Rail

Bottom Rail Cap

Tape Holder

Part Name

Specifications

Product Width

Product Height

Max. Area

Operation Method

Ladder Tape Type

300~2500mm

Ladder Cord Type

300~3000mm

500~3000mm

7m2

Chain operation

(Unit: mm)

■ Color Variation

■ Ladder Cord Colors *To reduce the light penetration. ■ Chain Colors

Raising, lowering and operating/closing are all done with a single endless plastic chain. Simple one-touch pulling action will lower the blind all the way down.Versatile maneuverability ensures a smooth operation from straight down movement of Bottom Rail during tilting prevents light from coming through and improved shielding ability.

SILKY CERT (25mm)

Smooth and excellent maneuverability

World’s

first

VENETIAN BLIND S I L K Y

66

58.5

Pro

duc

t he

ight

Cha

in le

ngth

= P

rod

uct

heig

ht –

20

21.3

25

14

29.5

❶ ❷❸

❹ ❹❺❻

❼❽

❼❽

❾ 1011

121314

Page 4: VENETIAN BLIND SILKY...Available with 30 colors of oxidized titanium slats to resolve the dirt. Available with 30 colors of fluorine slats to remove the dirt easily. - “Flexible

VENETIAN BLIND S I L K Y

STRUCTURE & PART NAME (Unit: mm)SILKY AQUA (25mm),SILKY CURTAIN AQUA (15mm)STANDARD TYPE

SILKY AQUA SILKY CURTAIN AQUA

*3.24 m2 for SILKY CURTAIN AQUA with double pitch specification.

Available Size Operative positionsFor product with Pole-type limited specification of width 150~260mm,operation part is installed closer to the center from Ladder Cord.

Order size (Width and height are available in the 10mm units)

Width (W)

Height (H)

Max. area

SILKY AQUA (Slat width 25mm)

Part specifications

Tilt Cover, Equalizer* (One-Pole)

Head Rail Cap, Tilt Gear, Bottom Rail Cap, Tape Holder, Grip*

SILKY AQUA (Slat width 25mm)*Oxidized titanium and fluorine slats apply antibacterial specifications.

Folded-up dimension

SILKY AQUA SILKY CURTAIN AQUA

One-Pole type

Left side operation Right side operation

Pole type

Left side operation Right side operation

Order size (Width and height are available in the 10mm units)

270~3000mm (One-Pole type), 150~3000mm (Pole type)

110~4000mm

6m2 (One-Pole type), 7m2 (Pole type)

270~2400mm (One-Pole type), 150~2400mm (Pole type)

110~2500mm

4.5m2*

Width (W)

Height (H)

Max. area

SILKY CURTAIN AQUA (Slat width 15mm)

- With height adjustment and side change functions.

- Easy cleaning for more comfort. Available with 30 colors of oxidized titanium slats to resolve the dirt.Available with 30 colors of fluorine slats to remove the dirt easily.

- “Flexible Slats,” break-proof, and with a sheer elegance.

+ 70mmBlind height x25

1000+ 60mmBlind height x

451000

Materials with superb water resistance are used.Not only Slat but also Head Rail and Bottom Rail are made of corrosion-resistant aluminum alloy and stainless steel.

Shuts out the leakage of light.Head Rail has a skirt to prevent the light leakage, so, when Slats are closed, a direct light between Head Rail and Slat is shut out.

Double pitch structure.Both ends of Slat are held by cords to reduce effects of the wind, and there’s no sticking of slats by droplet when used in damp conditions.

❶ Head Rail❷ Slat❸ Slat Holder❹ Head Rail Cap ❺ Bottom Rail Cap

❻ Bottom Rail❼ Lift Cord❽ Ladder Cord❾ Tape Holder 10 Bracket

11 Tilt Cover12 Tilt Gear13 Tilt Pole (One-Pole type)14 Grip

15 Equalizer16 Cord hook17 Cord Equalizer18 Operation Cord19 Safety Joint

19.3

12.2

1035

.8

Pro

duc

t he

ight

4.2

38.2

15

47

Blind Box (W)70 and over

Bracket

One-Pole type Pole type

29.4

1420

35.8

Pro

duc

t he

ight

4.2

38.2

25

47

Blind Box (W)70 and over

29.4

1420

35.8

Pro

duc

t he

ight

4.2

38.2

25

44.5

Blind Box (W)70 and over

One-Pole type Pole type

18.33.8

4.2

R2.1

R2.1

38.2

φ4.2

16

31.5

20.4

12.2

35.8

Pro

duc

t he

ight

4.2

38.2

15

44.5

19.3

Blind Box (W)70 and over

10

Width 25mm

W25.0XH29.1(26.1)mm

W38.2XH31.5mm

W24.7X11.5mm

Size

277 colors

ColorMaterial

Stainless steel alloy,plastic

Corrosion-resistantaluminum alloy*

Corrosion-resistantaluminum alloy

Corrosion-resistantaluminum alloy*

Bracket

Bottom Rail*

Other parts

Slat

Head Rail*

Tilt Cover, Equalizer* (One-Pole)

Head Rail Cap, Tilt Gear, Bottom Rail Cap, Tape Holder, Grip*

SILKY CURTAIN AQUA (Slat width 15mm)*Oxidized titanium and fluorine slats apply antibacterial specifications.

Width 15mm

W25.0XH29.1(26.1)mm

W38.2XH31.5mm

W16.0X9.5mm

Size

267 colors

ColorMaterial

Stainless steel alloy,plastic

Corrosion-resistantaluminum alloy*

Corrosion-resistantaluminum alloy

Corrosion-resistantaluminum alloy*

Bracket

Bottom Rail*

Other parts

Slat (Rail)

Head Rail*

❶ ❷ ❸ ❹

10

11 11

12

13

13

14

15

1617

18

19

❶ ❷ ❸ ❹

10

11

12

13

13

11

14

15

16

17

18

19

PRODUCT SPECIFICATION

Page 5: VENETIAN BLIND SILKY...Available with 30 colors of oxidized titanium slats to resolve the dirt. Available with 30 colors of fluorine slats to remove the dirt easily. - “Flexible

STRUCTURE & PART NAME (Unit: mm)

SILKY AQUA SILKY CURTAIN AQUA

Part specifications

Tilt Cover, Equalizer* (One-Pole)

Head Rail Cap, Tilt Gear, Bottom Rail Cap, Tape Holder, Grip*

SILKY AQUA (Slat width 25mm)*Oxidized titanium and fluorine slats apply antibacterial specifications.

❶ Head Rail❷ Slat❸ Slat Holder❹ Head Rail Cap ❺ Bottom Rail Cap

❻ Bottom Rail❼ Lift Cord❽ Ladder Cord❾ Tape Holder 10 Bracket

11 Tilt Cover12 Tilt Gear13 Tilt Pole (One-Pole type)14 Grip

15 Equalizer16 Cord hook17 Cord Equalizer18 Operation Cord19 Safety Joint

19.3

12.2

1035

.8

Pro

duc

t he

ight

4.2

38.2

15

47

Blind Box (W)70 and over

Bracket

One-Pole type Pole type

29.4

1420

35.8

Pro

duc

t he

ight

4.2

38.2

25

47

Blind Box (W)70 and over

29.4

1420

35.8

Pro

duc

t he

ight

4.2

38.2

25

44.5

Blind Box (W)70 and over

One-Pole type Pole type

18.33.8

4.2

R2.1

R2.1

38.2

φ4.2

16

31.5

20.4

12.2

35.8

Pro

duc

t he

ight

4.2

38.2

15

44.5

19.3

Blind Box (W)70 and over

10

Width 25mm

W25.0XH29.1(26.1)mm

W38.2XH31.5mm

W24.7X11.5mm

Size

277 colors

ColorMaterial

Stainless steel alloy,plastic

Corrosion-resistantaluminum alloy*

Corrosion-resistantaluminum alloy

Corrosion-resistantaluminum alloy*

Bracket

Bottom Rail*

Other parts

Slat

Head Rail*

Tilt Cover, Equalizer* (One-Pole)

Head Rail Cap, Tilt Gear, Bottom Rail Cap, Tape Holder, Grip*

SILKY CURTAIN AQUA (Slat width 15mm)*Oxidized titanium and fluorine slats apply antibacterial specifications.

Width 15mm

W25.0XH29.1(26.1)mm

W38.2XH31.5mm

W16.0X9.5mm

Size

267 colors

ColorMaterial

Stainless steel alloy,plastic

Corrosion-resistantaluminum alloy*

Corrosion-resistantaluminum alloy

Corrosion-resistantaluminum alloy*

Bracket

Bottom Rail*

Other parts

Slat (Rail)

Head Rail*

❶ ❷ ❸ ❹

10

11 11

12

13

13

14

15

1617

18

19

❶ ❷ ❸ ❹

10

11

12

13

13

11

14

15

16

17

18

19

Page 6: VENETIAN BLIND SILKY...Available with 30 colors of oxidized titanium slats to resolve the dirt. Available with 30 colors of fluorine slats to remove the dirt easily. - “Flexible

OPERATION METHOD (Unit: mm)

Grip

Equalizer

SILKY AQUA One-Pole Type

*Product installation height is necessary for One-Pole type.*If installation height is 1600mm or less, pole size will be 300mm regardless of product size.

Raise and lower operation

One-Pole length of One-Pole type

*Single type of 1500mm (without joint) can also be specified.Combinations of Attached Tilt Pole for Pole type

~1700mm

1710~1800mm

1810~1900mm

1910~2000mm

2010~2100mm

2110~2200mm

2210~2300mm

110~2000mm

2010~2500mm

2510~3000mm

3010~3500mm

3510~4000mm

500mm x 1pc

1000mm x 1pc

*500mm x 1pc + 1000mm x 1pc

1000mm x 2pcs

500mm x 1pc + 1000mm x 2pcs

Height Width 150~3000mm

300mm

400mm

500mm

600mm

700mm

800mm

900mm

Installation height Length of One-Pole

2310~2400mm

2410~2500mm

2510~2600mm

2610~2700mm

2710~2800mm

2810~2900mm

2910~3000mm

1000mm

1100mm

1200mm

1300mm

1400mm

1500mm

1600mm

Installation height Length of One-Pole

3010~3100mm

3110~3200mm

3210~3300mm

3310~3400mm

3410~3500mm

3510~3600mm

3610~3700mm

1700mm

1800mm

1900mm

2000mm

2100mm

2200mm

2300mm

Installation height Length of One-Pole

3710~3800mm

3810~3900mm

3910~4000mm

4010~4100mm

4110~4200mm

4210~4300mm

4310~4400mm

2400mm

2500mm

2600mm

2700mm

2800mm

2900mm

3000mm

Installation height Length of One-Pole

4410~4500mm

4510~4600mm

4610~4700mm

4710~4800mm

4810~4900mm

4910~5000mm

3100mm

3200mm

3300mm

3400mm

3500mm

3600mm

Installation height Length of One-Pole

Folded-up dimension(Dimension between upper Bracket and Bottom Rail when blind is all folded up.)

+ 70mmBlind height x25

1000

Product width (W)

Inst

alla

tion

heig

ht

Pro

duc

t he

ight

(H)

Leng

th o

f One

-Pol

e

Floor

Number of BracketProduct width (W)

150~1500mm

1510~3000mm

Bracket quantity

2pcs

3pcs

Number of Cords

150~800mm

810~1300mm

1310~1500mm

1510~1800mm

1810~2700mm

2710~3000mm

WidthHeight

2pcs

3pcs

4pcs

4pcs

5pcs

7pcs

H≦2000

2pcs

3pcs

4pcs

5pcs

5pcs

7pcs

2000<H

2pcs

2pcs

2pcs

2pcs

3pcs

3pcs

H≦2000

2pcs

2pcs

2pcs

3pcs

3pcs

3pcs

2000<H

Ladder Cord Q’ty Lift Cord Q’ty

SILKY CURTAIN AQUA

*Product installation height is necessary for One-Pole type.*If installation height is 1600mm or less, pole size will be 300mm regardless of product size.

One-Pole length of One-Pole type

*Single type of 1500mm (without joint) can also be specified.Combinations of Attached Tilt Pole for Pole type

~1700mm

1710~1800mm

1810~1900mm

1910~2000mm

2010~2100mm

2110~2200mm

2210~2300mm

110~2000mm

2010~2500mm

500mm x 1pc

1000mm x 1pc

Height Width 150~2400mm

300mm

400mm

500mm

600mm

700mm

800mm

900mm

Installation height Length of One-Pole

2310~2400mm

2410~2500mm

2510~2600mm

2610~2700mm

2710~2800mm

2810~2900mm

2910~3000mm

1000mm

1100mm

1200mm

1300mm

1400mm

1500mm

1600mm

Installation height Length of One-Pole

3010~3100mm

3110~3200mm

3210~3300mm

3310~3400mm

3410~3500mm

3510~3600mm

3610~3700mm

1700mm

1800mm

1900mm

2000mm

2100mm

2200mm

2300mm

Installation height Length of One-Pole

3710~3800mm

3810~3900mm

3910~4000mm

4010~4100mm

4110~4200mm

4210~4300mm

4310~4400mm

2400mm

2500mm

2600mm

2700mm

2800mm

2900mm

3000mm

Installation height Length of One-Pole

4410~4500mm

4510~4600mm

4610~4700mm

4710~4800mm

4810~4900mm

4910~5000mm

3100mm

3200mm

3300mm

3400mm

3500mm

3600mm

Installation height Length of One-Pole

Folded-up dimension(Dimension between upper Bracket and Bottom Rail when blind is all folded up.)

+ 60mmBlind height x45

1000

Product width (W)

Inst

alla

tion

heig

ht

Pro

duc

t he

ight

(H)

Leng

th o

f One

-Pol

e

Floor

Number of BracketProduct width (W)

150~1460mm

1470~2400mm

Bracket quantity

2pcs

3pcs

Number of Cords

2pcs

3pcs

4pcs

5pcs

7pcs

150~660mm

670~1060mm

1070~1460mm

1470~1860mm

1870~2400mm

2pcs

2pcs

2pcs

3pcs

3pcs

Ladder Cord Q’tyWidth Lift Cord Q’ty

②③

Pulling down Equalizer on the Grip of One-Pole will raise the slats of blind.

Stopping the Equalizer will stop raising midway.

To lower the blind, pull down the Equalizer slightly and release the grip. To stop midway, pull down the Equalizer slightly once again.

Tilt operation

By rotating the grip part of One-Pole clockwise/counter-clockwise, slat angle can be adjusted.

Pole Type

Raise and lower operation

①②

Pulling down the Operation Cord will raise the slats of blind.

Pulling Operation Cord and slanting it outward will stop movement.

To lower slats, pull Operation Cord lightly, slant it inward and gently release the grip.

Tilt operation

By rotating the Pole clockwise/counter-clockwise, slat angle can be adjusted.

②③

PRODUCT SPECIFICATION

Page 7: VENETIAN BLIND SILKY...Available with 30 colors of oxidized titanium slats to resolve the dirt. Available with 30 colors of fluorine slats to remove the dirt easily. - “Flexible

OPERATION METHOD (Unit: mm)

Grip

Equalizer

SILKY AQUA One-Pole Type

*Product installation height is necessary for One-Pole type.*If installation height is 1600mm or less, pole size will be 300mm regardless of product size.

Raise and lower operation

One-Pole length of One-Pole type

*Single type of 1500mm (without joint) can also be specified.Combinations of Attached Tilt Pole for Pole type

~1700mm

1710~1800mm

1810~1900mm

1910~2000mm

2010~2100mm

2110~2200mm

2210~2300mm

110~2000mm

2010~2500mm

2510~3000mm

3010~3500mm

3510~4000mm

500mm x 1pc

1000mm x 1pc

*500mm x 1pc + 1000mm x 1pc

1000mm x 2pcs

500mm x 1pc + 1000mm x 2pcs

Height Width 150~3000mm

300mm

400mm

500mm

600mm

700mm

800mm

900mm

Installation height Length of One-Pole

2310~2400mm

2410~2500mm

2510~2600mm

2610~2700mm

2710~2800mm

2810~2900mm

2910~3000mm

1000mm

1100mm

1200mm

1300mm

1400mm

1500mm

1600mm

Installation height Length of One-Pole

3010~3100mm

3110~3200mm

3210~3300mm

3310~3400mm

3410~3500mm

3510~3600mm

3610~3700mm

1700mm

1800mm

1900mm

2000mm

2100mm

2200mm

2300mm

Installation height Length of One-Pole

3710~3800mm

3810~3900mm

3910~4000mm

4010~4100mm

4110~4200mm

4210~4300mm

4310~4400mm

2400mm

2500mm

2600mm

2700mm

2800mm

2900mm

3000mm

Installation height Length of One-Pole

4410~4500mm

4510~4600mm

4610~4700mm

4710~4800mm

4810~4900mm

4910~5000mm

3100mm

3200mm

3300mm

3400mm

3500mm

3600mm

Installation height Length of One-Pole

Folded-up dimension(Dimension between upper Bracket and Bottom Rail when blind is all folded up.)

+ 70mmBlind height x25

1000

Product width (W)

Inst

alla

tion

heig

ht

Pro

duc

t he

ight

(H)

Leng

th o

f One

-Pol

e

Floor

Number of BracketProduct width (W)

150~1500mm

1510~3000mm

Bracket quantity

2pcs

3pcs

Number of Cords

150~800mm

810~1300mm

1310~1500mm

1510~1800mm

1810~2700mm

2710~3000mm

WidthHeight

2pcs

3pcs

4pcs

4pcs

5pcs

7pcs

H≦2000

2pcs

3pcs

4pcs

5pcs

5pcs

7pcs

2000<H

2pcs

2pcs

2pcs

2pcs

3pcs

3pcs

H≦2000

2pcs

2pcs

2pcs

3pcs

3pcs

3pcs

2000<H

Ladder Cord Q’ty Lift Cord Q’ty

SILKY CURTAIN AQUA

*Product installation height is necessary for One-Pole type.*If installation height is 1600mm or less, pole size will be 300mm regardless of product size.

One-Pole length of One-Pole type

*Single type of 1500mm (without joint) can also be specified.Combinations of Attached Tilt Pole for Pole type

~1700mm

1710~1800mm

1810~1900mm

1910~2000mm

2010~2100mm

2110~2200mm

2210~2300mm

110~2000mm

2010~2500mm

500mm x 1pc

1000mm x 1pc

Height Width 150~2400mm

300mm

400mm

500mm

600mm

700mm

800mm

900mm

Installation height Length of One-Pole

2310~2400mm

2410~2500mm

2510~2600mm

2610~2700mm

2710~2800mm

2810~2900mm

2910~3000mm

1000mm

1100mm

1200mm

1300mm

1400mm

1500mm

1600mm

Installation height Length of One-Pole

3010~3100mm

3110~3200mm

3210~3300mm

3310~3400mm

3410~3500mm

3510~3600mm

3610~3700mm

1700mm

1800mm

1900mm

2000mm

2100mm

2200mm

2300mm

Installation height Length of One-Pole

3710~3800mm

3810~3900mm

3910~4000mm

4010~4100mm

4110~4200mm

4210~4300mm

4310~4400mm

2400mm

2500mm

2600mm

2700mm

2800mm

2900mm

3000mm

Installation height Length of One-Pole

4410~4500mm

4510~4600mm

4610~4700mm

4710~4800mm

4810~4900mm

4910~5000mm

3100mm

3200mm

3300mm

3400mm

3500mm

3600mm

Installation height Length of One-Pole

Folded-up dimension(Dimension between upper Bracket and Bottom Rail when blind is all folded up.)

+ 60mmBlind height x45

1000

Product width (W)

Inst

alla

tion

heig

ht

Pro

duc

t he

ight

(H)

Leng

th o

f One

-Pol

e

Floor

Number of BracketProduct width (W)

150~1460mm

1470~2400mm

Bracket quantity

2pcs

3pcs

Number of Cords

2pcs

3pcs

4pcs

5pcs

7pcs

150~660mm

670~1060mm

1070~1460mm

1470~1860mm

1870~2400mm

2pcs

2pcs

2pcs

3pcs

3pcs

Ladder Cord Q’tyWidth Lift Cord Q’ty

②③

Pulling down Equalizer on the Grip of One-Pole will raise the slats of blind.

Stopping the Equalizer will stop raising midway.

To lower the blind, pull down the Equalizer slightly and release the grip. To stop midway, pull down the Equalizer slightly once again.

Tilt operation

By rotating the grip part of One-Pole clockwise/counter-clockwise, slat angle can be adjusted.

Pole Type

Raise and lower operation

①②

Pulling down the Operation Cord will raise the slats of blind.

Pulling Operation Cord and slanting it outward will stop movement.

To lower slats, pull Operation Cord lightly, slant it inward and gently release the grip.

Tilt operation

By rotating the Pole clockwise/counter-clockwise, slat angle can be adjusted.

②③

PRODUCT SPECIFICATION

Page 8: VENETIAN BLIND SILKY...Available with 30 colors of oxidized titanium slats to resolve the dirt. Available with 30 colors of fluorine slats to remove the dirt easily. - “Flexible

HOW TO CHANGE OPERATION SIDES AND ADJUST HEIGHT

Head Rail Cap

Tilt Gear

Tilt Cover

Spacer

General window

Installation to a curtain rail

Mounting Bracket

■ Determine the mounting position of Bracket and screw on.

When installing to a Curtain Rail, attach a Rail Screw

onto Bracket and fix it.

*Rail Screw is an optional part.

In the case of a ceiling installation In the case of a wall installation

Fixing Product (Head Rail)

■ Hook Head Rail onto Bracket and push until it clicks.

Set the Rail Screw as shown in the figure, slide it

from the end of Curtain Rail to determine the

position and fix it with a screwdriver.

Rail ScrewCurtain Rail

Bracket

Procedure for operation side changes < Only for One-Pole type > *Not applicable to Tension type (requiring no fitting screws).

Before Operation side change

(Right side operation)

After side change (Left side operation)

How to adjust the height

③Pull out Tilt Gear from Head Rail.Spreading the upper part of Head Rail with your fingers will make pulling out easier.

Turn the Tape Holder on the back of Bottom Rail with something like a coin or a flathead screwdriver. It will reduce the height by one pitch of Ladder Cord.

Reference: A quarter turn of dial will reduce about 5mm.

④Detach Spacer from the rear of Tilt Gear. ⑤Rotate Tilt Gear 90°in the arrow direction.

⑥Fit Spacer to the rear of Tilt Gear after the rotation.

⑦ Insert Tilt Gear into Head Rail so that Shaft will go into the upper hole of the two holes.

⑧Fit Tilt Cover and Head Rail Cap in the original position.

②Pull up Tilt Cover to remove.①Remove Head Rail Cap on the operation side.

INSTALLATION METHOD

Page 9: VENETIAN BLIND SILKY...Available with 30 colors of oxidized titanium slats to resolve the dirt. Available with 30 colors of fluorine slats to remove the dirt easily. - “Flexible

HOW TO CHANGE OPERATION SIDES AND ADJUST HEIGHT

Head Rail Cap

Tilt Gear

Tilt Cover

Spacer

General window

Installation to a curtain rail

Mounting Bracket

■ Determine the mounting position of Bracket and screw on.

When installing to a Curtain Rail, attach a Rail Screw

onto Bracket and fix it.

*Rail Screw is an optional part.

In the case of a ceiling installation In the case of a wall installation

Fixing Product (Head Rail)

■ Hook Head Rail onto Bracket and push until it clicks.

Set the Rail Screw as shown in the figure, slide it

from the end of Curtain Rail to determine the

position and fix it with a screwdriver.

Rail ScrewCurtain Rail

Bracket

Procedure for operation side changes < Only for One-Pole type > *Not applicable to Tension type (requiring no fitting screws).

Before Operation side change

(Right side operation)

After side change (Left side operation)

How to adjust the height

③Pull out Tilt Gear from Head Rail.Spreading the upper part of Head Rail with your fingers will make pulling out easier.

Turn the Tape Holder on the back of Bottom Rail with something like a coin or a flathead screwdriver. It will reduce the height by one pitch of Ladder Cord.

Reference: A quarter turn of dial will reduce about 5mm.

④Detach Spacer from the rear of Tilt Gear. ⑤Rotate Tilt Gear 90°in the arrow direction.

⑥Fit Spacer to the rear of Tilt Gear after the rotation.

⑦ Insert Tilt Gear into Head Rail so that Shaft will go into the upper hole of the two holes.

⑧Fit Tilt Cover and Head Rail Cap in the original position.

②Pull up Tilt Cover to remove.①Remove Head Rail Cap on the operation side.

INSTALLATION METHOD

Page 10: VENETIAN BLIND SILKY...Available with 30 colors of oxidized titanium slats to resolve the dirt. Available with 30 colors of fluorine slats to remove the dirt easily. - “Flexible

VENETIAN BLIND S I L K Y

SILKY AQUA (25mm),SILKY CURTAIN AQUA (15mm)TENSION TYPE (Requiring No Fitting Screws)

SILKY AQUA (25mm), SILKY CURTAIN AQUA (15mm) TENSION TYPE

Available Size(Width and height are available in the 10mm units.)

Product name

Slat width

Width (W)

Height (H)

Max. area

Color

Operation method

SILKY AQUA Tension type (requiring no fitting screws)

25mm

Up to 3.24m2

15mm

Up to 3.24m2

450~1800mm

110~1800mm

390~1800mm

110~1800mm

One-Pole type, Pole type

277 colors

SILKY CURTAIN AQUA Tension type (requiring no fitting screws)

One-Pole type, Pole type

267 colors

PRODUCT SPECIFICATION

Page 11: VENETIAN BLIND SILKY...Available with 30 colors of oxidized titanium slats to resolve the dirt. Available with 30 colors of fluorine slats to remove the dirt easily. - “Flexible

29.5

1420

36

Pro

duc

t he

ight

27.5

25

47

29.5

1420

36

Pro

duc

t he

ight

27.5

25

45.5

❶ ❸❹

10❾❼

❽11

12

13

14

15

16

17❻

20

❶ ❸❹

1020

❾❼

❽11

12

14

18

19

TENSION TYPE (Requiring No Fitting Screws) *Not available with operation side change function.

❶ Head Rail❷ Head Rail Cover❸ Slat❹ Slat Holder

❺ Plate Holder❻ Double-faced adhesive tape❼ Lift Cord❽ Ladder Cord

❾ Bottom Rail10 Bottom Rail Cap11 Tape Holder12 Tilt Cover

13 Tilt Gear14 Tilt Pole (One-Pole type)15 Grip16 Equalizer

One-Pole type

TENSION TYPE (Requiring No Fitting Screws)

*The figure shows SILKY AQUA Tension (requiring no fitting screws), One-Pole type. Pole type

*The figure shows SILKY AQUA Tension (requiring no fitting screws), Pole type.

Lever

After fitting position is determined, clean the surface and, using double-faced adhesive tape, attach Plate Holder with its tab side down.

Turn both right and left Dials evenly with a hand until they no longer turn.

Operate Lever inward as shown in the photo and fix Head Rail.

Slide Caps at both ends to cover the parts and you have completed installation.*Fold protruding double-faced adhesive tape and tuck it into Cap.

Align Head Rail with Plate Holder and push in. *Please make sure that Lever is in the position as shown in the figure above.

*CautionPlease note that installation is not possible on uneven surfaces such as patterned indented paper wall, cloth wall, clay wall, sand wall, or plywood.When fitting Plate Holder with double-faced adhesive tape onto the wall, clean the fitting area thoroughly with a dry cloth and so on, and attach it securely.

17 Cord Hook18 Cord Equalizer19 Operation Cord20 Safety Joint

③ ④ ⑤

STRUCTURE & PART NAME

INSTALLATION METHOD

(Unit: mm)

Page 12: VENETIAN BLIND SILKY...Available with 30 colors of oxidized titanium slats to resolve the dirt. Available with 30 colors of fluorine slats to remove the dirt easily. - “Flexible

VENETIAN BLIND S I L K Y

SILKY AQUA (25mm),SILKY CURTAIN AQUA (15mm)BOW WINDOW TYPE

BOW WINDOW TYPE

Available Size

Product name

Slat width

Height

Max. area

Color

SILKY AQUA Bow Window type

25mm

750-3000mm

600-3000mm

110-2500mm

Up to 5m2

277 colors

SILKY CURTAIN AQUA Bow Window type

15mm

690-2400mm

540-2400mm

110-2500mm

Up to 4.5m2

267 colors

BOW WINDOW TYPE

STRUCTURE & PART NAME (Unit: mm)

Three-unit bay window specification *The picture shows Silky Bow Window type, Pole type (3-unit / right side operation)

*The picture shows Silky Bow Window type, Pole type (2-unit / right side operation Ⅰ )Two-unit bay window specification

Bracket

WidthTotal width for 3-unit

Total width for 2-unit

❶ Head Rail❷ Slat❸ Slat Holder

❹ Head Rail Cap❺ Bottom Rail Cap❻ Bottom Rail

❼ Lift Cord❽ Ladder Cord❾ Tape Holder

13 Tilt Pole14 Tilt Gear15 Edge Cap

16 Hinge Joint17 Operation Cord18 Safety Joint

10 Bracket11 Bow Window Bracket12 Cord Equalizer

φ4.2

16

31.5

20.4

18.33.8

4.2

R2.1

R2.1

18.6 44.2

3.8

50.2

51.2

22.8

20.4

4.2

Bow Window Bracket Cap

Bracket for Bow Window

Head Rail

34.8

15.7

10.7

6.5

38.2

31.5

❶ ❷ ❸

❺❻

❼ ❽

1011

1213

14

15 16

17

1818

18

❶ ❷ ❸

❺❻

❼ ❽

❾18 18

1011

12

13

14

15 16

17PRODUCT SPECIFICATION

Page 13: VENETIAN BLIND SILKY...Available with 30 colors of oxidized titanium slats to resolve the dirt. Available with 30 colors of fluorine slats to remove the dirt easily. - “Flexible

VENETIAN BLIND S I L K Y

SILKY AQUA (25mm),SILKY CURTAIN AQUA (15mm)BOW WINDOW TYPE

BOW WINDOW TYPE

Available Size

Product name

Slat width

Height

Max. area

Color

SILKY AQUA Bow Window type

25mm

750-3000mm

600-3000mm

110-2500mm

Up to 5m2

277 colors

SILKY CURTAIN AQUA Bow Window type

15mm

690-2400mm

540-2400mm

110-2500mm

Up to 4.5m2

267 colors

BOW WINDOW TYPE

STRUCTURE & PART NAME (Unit: mm)

Three-unit bay window specification *The picture shows Silky Bow Window type, Pole type (3-unit / right side operation)

*The picture shows Silky Bow Window type, Pole type (2-unit / right side operation Ⅰ )Two-unit bay window specification

Bracket

WidthTotal width for 3-unit

Total width for 2-unit

❶ Head Rail❷ Slat❸ Slat Holder

❹ Head Rail Cap❺ Bottom Rail Cap❻ Bottom Rail

❼ Lift Cord❽ Ladder Cord❾ Tape Holder

13 Tilt Pole14 Tilt Gear15 Edge Cap

16 Hinge Joint17 Operation Cord18 Safety Joint

10 Bracket11 Bow Window Bracket12 Cord Equalizer

φ4.2

16

31.5

20.4

18.33.8

4.2

R2.1

R2.1

18.6 44.2

3.8

50.2

51.2

22.8

20.4

4.2

Bow Window Bracket Cap

Bracket for Bow Window

Head Rail

34.8

15.7

10.7

6.5

38.2

31.5

❶ ❷ ❸

❺❻

❼ ❽

1011

1213

14

15 16

17

1818

18

❶ ❷ ❸

❺❻

❼ ❽

❾18 18

1011

12

13

14

15 16

17PRODUCT SPECIFICATION

Page 14: VENETIAN BLIND SILKY...Available with 30 colors of oxidized titanium slats to resolve the dirt. Available with 30 colors of fluorine slats to remove the dirt easily. - “Flexible

SingleRemote

Controller

AddressRemote

Controller

Timer switch

*Pictured is a product for a small window.

● Suitable for the window in shade.

● Easy installationNo electrical wiring work is required.

● For sunny windows

● Due to small remote control sensor, it has a simple appearance.

● Long battery life

● Easy installationNo electrical wiring work is required.

● Timer can be set for three different times a day!

Remote control sensor

Connecter (male)

Connecter (female)

19

2.7

98.5

(min

imum

)14

0.5

(max

imum

)

77.5

42

10.5

16

35

Ø4.1

2015

Ø3.5

500

18.3

2.316

90°

● Solar panel ● Remote control sensor

● Remote control sensor

70 18

55

73

150

18

15.5

21.3

36

Pro

duc

t he

ight

62.5

25

29.5

Single remote controller

Single remote controller

Remote controller holder

Remote controller holder

Address remote controller

Address remote controller

❷❸

1314

1511 10

12

❻❼

*Remote control sensor can be easily mounted to the head box.

100

150

Connecter

❶❷

1314

15

16

1112

❺❼

15.5

21.3

36

Pro

duc

t he

ight

25

29.5

WINK (25mm / REMOTE CONTROL)

■ Operation Method

■ About Control

Controller Type Features

Connecting Diagram

Can be operated from any position! Moreover, comes equipped with a timer function.

Remote Control Type *Transmittable distance: Within 7m

Individual operation: Control 1 unit of blinds with 1 controllerSimultaneous operation: Control several units of blinds simultaneously with a single controllerSimultaneous + individual operation: Several units of blinds can be controlled both simultaneously and individually

Type

Remote Control

Type

Power Source

Solar battery

Battery

No.1 No.2 No.3 No.4

Single remote controller

No.1 No.2 No.3 No.4

Address remote controller

Single remote controller

Address remote controller

Number of Units Controlled

1 unit

2 – 4 units

1 unit

2 – 4 units

ControlType

Individual

Simultaneous +

individual

Individual

Simultaneous +

individual

Tilting (opening/closing) slats can be easily handled due to electric operation.Controller and power source can be selected from various types of products, in accordance with the place to be mounted and usage.

*Lifting is manually operated.

Eco-Friendly

WINK “Solar Battery Set”The WINK “Solar Battery Set”, which tilts (opens/closes) slats by fully utilizing solar energy is an eco-friendly product. As solar energy is accumulated in the built-in rechargeable battery, the battery lasts longer than dry cell batteries, saving the trouble of replacing the battery. It is recommended for sunny windows.

World’s

first

If you set the timer to enable the slats to let in light when you wake up in the morning, you will wake up comfortably!

Power Source

Solar Battery

Set

Battery Set

Solar Battery

Set

Battery Set

Solar Battery

Set

Battery Set

Remote control sensor can be hooked to the head box also.

STRUCTURE & PART NAME

Part Name and Material

Parts for Remote Control Type

(Unit: mm)

Material

Stainless alloy, Plastic

Coated steel plate molding

Plastic

Corrosion-resistant aluminum alloy

Plastic

Plastic, etc.

Plastic, etc.

Plastic

Mounting Bracket

Head Rail

Head Rail Cap

Slat

Slat Holder

Solar Panel

Remote Control Sensor

Cord Equalizer

Part Name Color

Plastic portion: Clear

Similar to slat color

Milky white

287 colors

Clear

Plastic portion: Off-white

Off-white

Clear

Material

Polyester

Plastic

Polyester

Polyester

Coated steel plate molding

Plastic

Plastic

Steel plate press forming, Plastic, etc.

Color

10

11

12

13

14

15

16

Operation Cord

Safety Joint

Ladder Cord

Lift Cord

Bottom Rail

Bottom Rail Cap

Tape Holder

Tilt Motor Unit

Part Name

Similar to slat color

Milky white

Similar to slat color

Similar to slat color

Similar to slat color

Milky white

Clear

90

80

Bracket thickness 6.5mm

90°

Wall face (in case of wall fixing)

Bracket thickness 6.5mm

Ceiling

The solar panel, and remote control sensor for both solar Battery set and Battery set can be used by hooking them on to the head rail.If the blind box prevents it from being hooked on to the head rail, it is also possible to directly mount it to a wall.

ControlType

VENETIAN BLIND S I L K Y

Page 15: VENETIAN BLIND SILKY...Available with 30 colors of oxidized titanium slats to resolve the dirt. Available with 30 colors of fluorine slats to remove the dirt easily. - “Flexible

SingleRemote

Controller

AddressRemote

Controller

Timer switch

*Pictured is a product for a small window.

● Suitable for the window in shade.

● Easy installationNo electrical wiring work is required.

● For sunny windows

● Due to small remote control sensor, it has a simple appearance.

● Long battery life

● Easy installationNo electrical wiring work is required.

● Timer can be set for three different times a day!

Remote control sensor

Connecter (male)

Connecter (female)

19

2.7

98.5

(min

imum

)14

0.5

(max

imum

)

77.5

42

10.5

16

35

Ø4.1

2015

Ø3.5

500

18.3

2.316

90°

● Solar panel ● Remote control sensor

● Remote control sensor

70 18

55

73

150

18

15.5

21.3

36

Pro

duc

t he

ight

62.5

25

29.5

Single remote controller

Single remote controller

Remote controller holder

Remote controller holder

Address remote controller

Address remote controller

❷❸

1314

1511 10

12

❻❼

*Remote control sensor can be easily mounted to the head box.

100

150

Connecter

❶❷

1314

15

16

1112

❺❼

15.5

21.3

36

Pro

duc

t he

ight

25

29.5

WINK (25mm / REMOTE CONTROL)

■ Operation Method

■ About Control

Controller Type Features

Connecting Diagram

Can be operated from any position! Moreover, comes equipped with a timer function.

Remote Control Type *Transmittable distance: Within 7m

Individual operation: Control 1 unit of blinds with 1 controllerSimultaneous operation: Control several units of blinds simultaneously with a single controllerSimultaneous + individual operation: Several units of blinds can be controlled both simultaneously and individually

Type

Remote Control

Type

Power Source

Solar battery

Battery

No.1 No.2 No.3 No.4

Single remote controller

No.1 No.2 No.3 No.4

Address remote controller

Single remote controller

Address remote controller

Number of Units Controlled

1 unit

2 – 4 units

1 unit

2 – 4 units

ControlType

Individual

Simultaneous +

individual

Individual

Simultaneous +

individual

Tilting (opening/closing) slats can be easily handled due to electric operation.Controller and power source can be selected from various types of products, in accordance with the place to be mounted and usage.

*Lifting is manually operated.

Eco-Friendly

WINK “Solar Battery Set”The WINK “Solar Battery Set”, which tilts (opens/closes) slats by fully utilizing solar energy is an eco-friendly product. As solar energy is accumulated in the built-in rechargeable battery, the battery lasts longer than dry cell batteries, saving the trouble of replacing the battery. It is recommended for sunny windows.

World’s

first

If you set the timer to enable the slats to let in light when you wake up in the morning, you will wake up comfortably!

Power Source

Solar Battery

Set

Battery Set

Solar Battery

Set

Battery Set

Solar Battery

Set

Battery Set

Remote control sensor can be hooked to the head box also.

STRUCTURE & PART NAME

Part Name and Material

Parts for Remote Control Type

(Unit: mm)

Material

Stainless alloy, Plastic

Coated steel plate molding

Plastic

Corrosion-resistant aluminum alloy

Plastic

Plastic, etc.

Plastic, etc.

Plastic

Mounting Bracket

Head Rail

Head Rail Cap

Slat

Slat Holder

Solar Panel

Remote Control Sensor

Cord Equalizer

Part Name Color

Plastic portion: Clear

Similar to slat color

Milky white

287 colors

Clear

Plastic portion: Off-white

Off-white

Clear

Material

Polyester

Plastic

Polyester

Polyester

Coated steel plate molding

Plastic

Plastic

Steel plate press forming, Plastic, etc.

Color

10

11

12

13

14

15

16

Operation Cord

Safety Joint

Ladder Cord

Lift Cord

Bottom Rail

Bottom Rail Cap

Tape Holder

Tilt Motor Unit

Part Name

Similar to slat color

Milky white

Similar to slat color

Similar to slat color

Similar to slat color

Milky white

Clear

90

80

Bracket thickness 6.5mm

90°

Wall face (in case of wall fixing)

Bracket thickness 6.5mm

Ceiling

The solar panel, and remote control sensor for both solar Battery set and Battery set can be used by hooking them on to the head rail.If the blind box prevents it from being hooked on to the head rail, it is also possible to directly mount it to a wall.

ControlType

VENETIAN BLIND S I L K Y

Page 16: VENETIAN BLIND SILKY...Available with 30 colors of oxidized titanium slats to resolve the dirt. Available with 30 colors of fluorine slats to remove the dirt easily. - “Flexible

Blind temperature

-3.7℃Low reflection

Aluminum base

Painted surface

Surface coated with fluorine

((((((((

((((((((

((((((((

DustDirt

Dust Dirt

● Normal slats

● In the case of sand gray

(e.g. Sand gray color)

*Measured with a single slat

● Thermal barrier coating slats(e.g. Sand gray color)

Infrared territory

100

90

80

70

60

50

40

30

20

10

0300 500 700 800 900 1100 1300 1500 1700 1900 2100

Thermal barrier coating slatNormal slat

Oxidized titanium coating slat

Uncoated slat

Oxidized titanium coating slat

Uncoated slat

● Before light emitted ● In 3 hours of light emitted

Antifouling Effect

Oxidized titanium responds to a wide area of light

200

Wavelength (nm)

400 600 780 1000 1500 2000

Area of light that oxidized titanium responds to(Ultraviolet rays and visible light: 200 – 600nm)

Wavelength and characteristics of light

FUNCTIONAL SLAT (25mm / 15mm)

“Fluorine coating” indicates slats coated with fluorine. Cigarette tar and oil spots can be wiped clean with ease. In addition, the color does not easily fade due to exposure to sunlight and it features strong resistance to rust and mold.

Eco-

friendly

Easy-

cleaning

The “Oxidized Titanium Coating” gains antifouling, antibacterial and deodorant effects by light (Ultraviolet rays / visible light).

Self-

cleaningPrevent Room Temperature from Rising

Thermal Barrier Coating Saving Energy Wisely by Blocking Solar Heat

Self - Cleaning by Light

Oxidized Titanium Coating SlatAntifouling, antibacterial and deodorant effects

Keep clean by easy wipe

Fluorine Coating Slat Dirt can be removed easily

Wipe clean with ease

High reflection

The reflection ratio is about

2.5 times higher

Enhance the sunlight reflection effect and reduce heat penetrating into rooms

Generally, white substances reflect sunlight well and black substances absorb solar insulation. Absorbed solar insulation then changes into thermal energy, which warms the substance. Thermal barrier coating slats are slats coated with paint that has high reflection performance* as “white” prevents the room temperature from rising and reduces the burden on air conditioning.*The paint itself has high reflection performance, no special coating is applied!

Usually, many components that easily absorb infrared rays are contained in dark-color paint. However, the development of special paint with such components removed enables a high reflection ratio even with conventionally more difficult dark-colored slats. More color choices with eco-friendly is just realized with Tachikawa Thermal Barrier Coating Slats.

Tachikawa proposes the life living in harmony with sun.Our WINK “Solar Battery Set” and “Therinal Barrier Coating Slat” can be realized ecology and economy life.

Conditions for simulation● Climate conditions: Tokyo,

facing West, July 23● Total amount of solar

insulation on the window surface: 701W/m2 (West sun)

● Outdoor temperature: 32.8℃● Indoor temperature: 26℃

Since sand gray is a dark color, a significant difference in the reflection ratio is found between the thermal barrier coating slat and general slat.

Thermal barrier coating slat(Slat color: sand gray)

Normal slat(Slat color: sand gray)

Sur

face

te

mp

erat

ure

High

Low

Testing ConditionLeft Blind : Normal SlatsRight Blind : Thermal Barrier Coating SlatsSlat Color : Sand GrayLight Source : 2 sets x 4 units of

150W reflection lumpLights Location : 80cm away from BlindsTesting Time : 240 sec.*After having passed 240 sec., a thermal equilibrium was established and maintained and no change in the temperature of blinds surface was observed.

Comparison

Ref

lect

ion

ratio

(%)

Wavelength (nm)

Normal slat

Thermal barrier coating slat

Difference in temperature of blind

Blind temperature

39.9℃ 29.1℃

36.2℃ 71.6℃

3.7℃

Infrared ray reflection ratio

1Point

The sun light (energy) is composed of ultraviolet rays (5%), visible light (45%) and infrared rays (50%).The oxidized titanium that Tachikawa Corporation offers responds to a wide area of light and thus approximately 30% of sunlight (energy) can be used.Due to the wide responding area, the product exhibits high antifouling, antibacterial and deodorant performance.

Ultraviolet rays

Visible light Infrared rays

(Outdoor) (Indoor) [Ultraviolet ray + visible light type]

Transparent glass

Visible light

Ultraviolet rays

When permeating glass, many ultraviolet rays are filtered out.

Also effective for windows in the Shade2

Point

For the windows in the shade can not receive a lot of sunlight, the effect from ultraviolet rays is not notable but the effect from “visible light” can be effectively gained.

Visible light is hardly filtered out. Thus, for indoor products, the “ultraviolet ray + visible light type” is more effective than the ultraviolet ray type.

Permeability: Significant

Permeability: Little

[Ultraviolet ray type]

Dirt and odorBacteria

Light from lighting fixtures also has an effect3

Point

Indoor lighting (fluorescent lamps, incandescent light bulbs, etc.) emit visible light.Since the oxidized titanium that Tachikawa Corporation offers responds to such visible light as well, an effect is produced even from room light.

Dirt on slats(Organic substances and bacteria, odors)

Dirt and odor

Bacteria

During the day During the night

Oxidized titanium

Oxidized titanium

Simple and easy care enables the maintenance of clean and beautiful blinds.

Slat color: sand gray

VENETIAN BLIND S I L K Y

Page 17: VENETIAN BLIND SILKY...Available with 30 colors of oxidized titanium slats to resolve the dirt. Available with 30 colors of fluorine slats to remove the dirt easily. - “Flexible

Oxidized titanium coating slat

Uncoated slat

Oxidized titanium coating slat

Uncoated slat

● Before light emitted ● In 3 hours of light emitted

Antifouling Effect

Oxidized titanium responds to a wide area of light

200

Wavelength (nm)

400 600 780 1000 1500 2000

Area of light that oxidized titanium responds to(Ultraviolet rays and visible light: 200 – 600nm)

Wavelength and characteristics of light

The “Oxidized Titanium Coating” gains antifouling, antibacterial and deodorant effects by light (Ultraviolet rays / visible light).

Self-

cleaningSelf - Cleaning by Light

Oxidized Titanium Coating SlatAntifouling, antibacterial and deodorant effects

1Point

The sun light (energy) is composed of ultraviolet rays (5%), visible light (45%) and infrared rays (50%).The oxidized titanium that Tachikawa Corporation offers responds to a wide area of light and thus approximately 30% of sunlight (energy) can be used.Due to the wide responding area, the product exhibits high antifouling, antibacterial and deodorant performance.

Ultraviolet rays

Visible light Infrared rays

(Outdoor) (Indoor) [Ultraviolet ray + visible light type]

Transparent glass

Visible light

Ultraviolet rays

When permeating glass, many ultraviolet rays are filtered out.

Also effective for windows in the Shade2

Point

For the windows in the shade can not receive a lot of sunlight, the effect from ultraviolet rays is not notable but the effect from “visible light” can be effectively gained.

Visible light is hardly filtered out. Thus, for indoor products, the “ultraviolet ray + visible light type” is more effective than the ultraviolet ray type.

Permeability: Significant

Permeability: Little

[Ultraviolet ray type]

Dirt and odorBacteria

Light from lighting fixtures also has an effect3

Point

Indoor lighting (fluorescent lamps, incandescent light bulbs, etc.) emit visible light.Since the oxidized titanium that Tachikawa Corporation offers responds to such visible light as well, an effect is produced even from room light.

Dirt on slats(Organic substances and bacteria, odors)

Dirt and odor

Bacteria

During the day During the night

Oxidized titanium

Oxidized titanium

Simple and easy care enables the maintenance of clean and beautiful blinds.