VeHiCle startin CHarin systems - Precision...
Transcript of VeHiCle startin CHarin systems - Precision...
SINCE 1961 HEAVY DUTYBY PRECISION REBUILDERS
100% New Units
3
&
VEHICLE STARTING & CHARGING SYSTEMS
SINCE 1961 HEAVY DUTYBY PRECISION REBUILDERS
Warranty Alternators and Starters ..........................3
alternators Features and Benefits .............................4 Installation ..............................................5 Model 21/22 ....................................... 6-7 Model 24 .......................................... 8-10 Model 28 ..............................................11 Model 35 ........................................ 12-13 Model 35 ........................................ 14-15 Model Leece Neville........................ 16-17 Load Handler........................................ 18
starters Features and Benefits ...........................19 Installation ........................................... 20 Model 39 ........................................ 21-25 Model 42 ........................................ 26-27 Model R5........................................ 28-29
2
taBle oF Contents
www.precisionrebuilders.com
SINCE 1961 HEAVY DUTYBY PRECISION REBUILDERS
page i
Warranty terms and ConditionsPrecision Rebuilders warrants each Precision Rebuilders product to be free of defects in material or workmanship under normal use and service. The length of the Warranty Period is for a period of one year. The warranty periods commences on the in-service or install date and is not transferable. Failure to provide the in-service or install date on the warranty claim tag will cause the warranty period to begin on the date the part was manufactured.
A completed warranty claim form should accompany all parts submitted to Precision Rebuilders for warranty consideration. The claim form should contain all of the information required. Lack of proper information may result in denial of warranty claim. Claims must be submitted no later than 60 days after part is removed.
This warranty does not apply if in sole judgment of Precision Rebuilders, the product has been consumed, subject to accident, faulty repair, improper adjustment, installation, lubrication, or wiring, neglect, misuse; or is caused by failure of a part not supplied by Precision Rebuilders.
This warranty shall not apply if any Precision Rebuilders product is used for a purpose for which it is not designed or altered in any way so as to affect adversely its performance and reliability. Precision Rebuilders requires the examination of ALL products or parts to confirm that the part has failed as a result of material or workmanship. Transportation for products and parts submitted to Precision Rebuilders for warranty consideration must be prepaid. Repaired or replaced Precision Rebuilders parts will be returned, transportation and handling charges collect. No charge will be made for labor or material in effecting such repairs.
The obligation of Precision Rebuilders under this Warranty is limited to making good by replacement of the defect part. This Warranty does not apply to products or parts where adjustments will correct the alleged defect Precision Rebuilders neither assumes nor authorizes any other person to assume on its behalf any other warranty or liabilities in connection with Precision Rebuilders products.
Precision Rebuilder’s WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES, EXPRESSED, IMPLIED, OR STATUATORY INCLUDING BUT NOT LIMITED TO ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR PARTICULAR PURPOSES.
THIS WARRANTY DOES NOT APPLY TO LOSS OF VEHICLE OR EQUIPMENT, LOSS OF TIME, INCONVENIENCE, OR OTHER INCIDENTAL OR CONSEQUENTIAL DAMAGES. Precision Rebuilders SHALL NOT BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES arising out of or from the use of Precision Rebuilders’s products by the buyer, its assignees, employees, agents or customers.
AlternAtors & stArtersLimited Warranty
All products have a one year warranty (calculated from the date of sale) for failure to perform due to defects in material or workmanship. Before warranty is determined the Distributor must return the alleged warranty product with the proper documentation to the plant for testing. The product will be tested at the plant and a return call to the Distributor will be made to communicate the Failure Analysis. If the product is warrantable, the customer will be issued a credit for the unit only. If the product tests OK, the unit will be returned to the Distributor.
There are no warranties or conditions beyond this document and no person is granted or authorized to express or imply additional warranty or liability. The buyer’s sole remedy for a warranted product is replacement of product per conditions above. In no event shall Precision Rebuilders, its agents or employees be responsible for incidental or consequential damages nor negligence in any respect.
SINCE 1961 HEAVY DUTYBY PRECISION REBUILDERS
4
HEAVY DUTY ALTERNATORSSINCE 1961 HEAVY DUTY
BY PRECISION REBUILDERS
SINCE 1961 HEAVY DUTYBY PRECISION REBUILDERS
alternator installation instrUCtions WARNING: ALWAYS USE PROPER EYE PROTECTION WHEN PERFORMING ANY MECHANICAL REPAIRS TO A VEHICLE -INCLUDING, BUT NOT LIMITED TO, ANY INSTALLATION AND OR REPAIRS TO THE ALTERNATORS. FAILURE TO USE PROPER EYE PROTECTION CAN LEAD TO SERIOUS AND PERMANENT EYE DAMAGE. Only perform the mechanical functions that you are properly qualified to per-form. Mechanical repairs that are beyond your technical capabilities should be handled by a professional installation specialist.
WARNING: To avoid injury or damage, always disconnect the negative cable at the battery before removing or replacing the alternator. The alternator output terminal is always live (“hot’). If the battery is not disconnected, a tool accidentally touching this terminal and ground can quickly get hot enough to burn skin or damage the tools and surrounding parts.
CAUTION: Remove jewelry before working on electrical system to avoid injury or damage to the system.
PULLEY INSTRUCTIONS
Use pulley from old alternator if this alternator does not have a pulley or pulley supplied is different from the one on alternator being replaced. NOTICE! When changing the pulley, keep the alternator in the -horizontal position and do not apply any pressure to end of the shaft. Internal damage will occur if the shaft is pushed back and turned. If there were spacers: when the fan and pulley were removed, make sure all spacers are replaced when installing the fan and pulley on this alternator. Hold the shaft by placing a hex wrench in the hexagonal hole in the shaft while removing or installing the pulley. Tighten the pulley nut to 95-108 Nm (70-80 Ibs ft.).
BELT TENSIONING INSTRUCTIONS
Improper belt tension can cause premature alternator failure. Use a torque wrench to tighten mounting bolts to specified torque. Follow vehicle or engine manufacturer’s specifications carefully for belt tension and mounting bolts torque. DO NOT OVER TIGHTEN BELT!
TERMINAL DESCRIPTIONS
“POS” Terminal - Output terminal connects to the Positive (+) Battery terminal.
“R” Terminal - Relay terminal carries half systems voltage and may be used for certain types of control relays, charge indicators, tachometers or similar devices. The current draw should not exceed four (4) amperes. Notice! Do not install the remote sense lead to this terminal.
“I” Terminal - Indicator lamp/Ignition terminal carries full system voltage. Current draw should not exceed one (1) ampere. It is recommended current is not drawn from this terminal.
Ground Screw - Ground lead ensures alternator is grounded and is strongly recommended for optimum performance.
“Remote Sense” Terminal - Monitors batteries system voltage at the Batteries or a common distribution point. The Sense termi-nal is the fourth terminal and is identified with a “remote sense” label on the back cover plate. Notice! Do not connect anything but the remote sense line to this terminal.
• If installing a remote sense alternator in a vehicle without a remote sense line, connect a lead from the Voltage Sense terminal to the Positive (+) Battery terminal or the common distribution point at the Starter Solenoid Battery (+) terminal.
• If installing a non-remote sense alternator in a vehicle that has a remote sense line, disconnect and secure the wire from the battery. Notice! Be careful not to ground the leads open end and if it has a fuse it should be deactivated.
• Only connect the sense line to the remote sense terminal. The “R” Terminal is Not the Remote Sense Terminal!
INSTALLATION INSTRUCTIONS
1. Disconnect the negative (-) cable at the batteries.
2. Identify and tag all leads when removing the old Alternator and install them on the same terminals of the new Alternator.
3. Insure all leads are hooked back up or contained where they can not ground.
4. Torque all fasteners to values labeled on the illustration.
5. This Alternator may have more terminals than the alternator it is replacing had or used. It will function properly by only hooking up the leads that were used on the alternator being replaced.
SINCE 1961 HEAVY DUTYBY PRECISION REBUILDERS
5
HEAVY DUTY ALTERNATORS
SINCE 1961 HEAVY DUTYBY PRECISION REBUILDERS
6
21 / 22 model
21/22 Model Detailed Specifications:
8003NAlternator - Delco 21sI series
70 Amp/24 Volt, 1-Wire system, neg. Ground
Used on: Cummins, Timberjack w/ Cummins 5.9L, 8.3L DieselDim: M6 x 1.0 Batt. Term.Universal R-Term.M4 I-Term.replaces: Delco 1117897,
1117900, 19010111, 19010182
8367NAlternator - Delco 22sI series
70 Amp/24 Volt, 1-Wire system, neg. Ground
Used on: Cummins, Timberjack w/ Cummins 5.9L, 8.3L DieselDim: M6 x 1.0 Batt. Term.Universal R-Term.M4 I-Term.replaces: Delco 1117897, 1117900,
19010111, 19010182
SINCE 1961 HEAVY DUTYBY PRECISION REBUILDERS
7
8362NAlternator - 22 Model
145 Amp/12 Volt, 1-Wire system, neg. Ground
Application: Various Heavy Duty Makes and Modelsreplaces: Delco 19020388, 19020389, 19020889Dim: 5/16-18 Batt. Term.10-24 R-Term., 10-24 I-Term.note: Bidirectional Fan wo/ pulley
21 / 22 model
8076NAlternator - 22 Model
150 Amp/12 Volt,1-Wire system, neg. Ground
Application: Various Heavy Duty Makes and Modelsreplaces: Delco 19020306, 19020310Dim: 1/4-28 Batt. Term.Universal R-Term., 5/16 I-Term.note: Bidirectional Fan wo/ pulley
SINCE 1961 HEAVY DUTYBY PRECISION REBUILDERS
24 model
24 Model Detailed Specifications:
Performance output: 160 Amps - 12 Volts Construction: Brush
stator Diameter: 144mm
length (to end of shaft): 223mm
typical Weight: 7.6 kg (16.7 lbs)
speed Capability: Continuous - 10,000 rpm Intermittent 12,000 rpm
temperature limits: -40°F Ambient (Min) 221°F Ambient (Max)
Polarity: Negative Ground
rotation: Clockwise
24 Model Design Features and Benefits:
•DualInternalFanscreatecoolenvironmentforbearingsandelectronics•Built-inprotectionfromwaterandothercontaminantswithdualspacersand
slingers•Multi-functionregulatorwithanenvironmentallysealedpackardconnector
features auto-start and optional remote sense capability•Smallerslipringswithhigherresistancetobrushbounceforextended
service life•SREcoverprotectselectronicswhilemanagingairflow•Easyinstallationwithone-wireconnection•Advanceddesign“Avalanche”pressfitdiodesprovidelonglife,protection
from electrical system spikes
8
SINCE 1961 HEAVY DUTYBY PRECISION REBUILDERS
24 model
8718NAlternator - 24 Model HP
160 Amp/12 Volt, wo/ pulley
replaces: Delco 8600310 Dim: 5/16-18 Batt. Term. 10-24 I-Term. 10-24 R-Term.
8719NAlternator - 24 Model HP
160 Amp/12 Volt, wo/ pulley replaces: Delco 8600889 Dim: 5/16-18 Batt. Term. 10-24 I-Term. 10-24 R-Term.
9
SINCE 1961 HEAVY DUTYBY PRECISION REBUILDERS
10
24 model
8704N Alternator - Delco 24sI HP series
160 Amp/12 Volt
replaces: Cummins 3972734; Delco 8600068, 8600142, 8700021Used on: Mack, Volvo Trucks
8709N Alternator - Delco 24sI HP series
70 Amp/24 Volt
replaces: Cummins 4936879; Delco 8600017, 020, 154; 8700019
SINCE 1961 HEAVY DUTYBY PRECISION REBUILDERS
11
28 model
8741NAlternator - Delco 28sI series
200 Amp/12 Volt, CW replaces: Delco 8600314, 8600316 Dim: 5/16-18 Batt. Term.10-24 R-Term.10-24 I-Term.10-24 Remote Sense Term.
8745NAlternator - Delco 28sI series
200 Amp/12 Volt, CW replaces: Delco 8600307, 8600311 Dim: 5/16-18 Batt. Term.10-24 R-Term.10-24 I-Term.10-24 Remote Sense Term.
8743NAlternator - Delco 28sI series
200 Amp/12 Volt, CW replaces: Delco 8600223, 8600313 Dim: 5/16-18 Batt. Term.10-24 R-Term.10-24 I-Term.10-24 Remote Sense Term.
SINCE 1961 HEAVY DUTYBY PRECISION REBUILDERS
12
35 model
Performance output: 105 Amps / 140 Amps - 12 Volts
Maximum speed: 10,000 rpm Continuous 12,000 rpm Intermittent
rotation: Clockwise or Counterclockwise
temperature limits: -40° F Ambient (Min) +221° F Ambient (Max)
Polarity: Negative Ground Standard
Mounting: SAE J180 Standard, Quad mount, PAD Mount
Weight: 25.4 lbs or 11.5 kg
35 Model Detailed Specifications:
Features and Benefits:
•Strategicallyplacedradiantventsensuremaximumcoolingofinternalcomponentsinhigh-temperatureunderhoodenvironments
•Premiumbrushlessdesignextendsservicelifeandoptimizesperformance
•High-efficiencystatorwindingsandoptimizedrotordesigndeliverhighoutput
•Oversizedheavydutybearingsandpremiumqualitysteelshaftwithstandhighvibrationandheavybeltloads
•Highthermal-capacitydesignstandsuptoextremetemperatures,thermalstressforextendedservicelife
•All35ModelAlternatorsfeatureRemoteSenseTechnologycapability,optimizingbatterystateofcharge
SINCE 1961 HEAVY DUTYBY PRECISION REBUILDERS
13
35 model
8607NAlternator - 35 Model HP
140 Amp/12 Volt, neg. Ground
replaces: Delco 8600064, 8700016, 10459612, 19011260Dim: 1/4-28 Batt. Term.10-24 R-Term., 10-24 I-Term.10-24 Remote Sense Term.note: Bidirectional Fan wo/ pulley
8609NAlternator - 35 Model HP
140 Amp/12 Volt, neg. Ground
replaces: Delco 8600066, 8700018Dim: 1/4-28 Batt. Term.10-24 R-Term., 10-24 I-Term.10-24 Remote Sense Term.note: Bidirectional Fan wo/ pulley
8608NAlternator - 35 Model HP
140 Amp/12 Volt, neg. Ground
replaces: Delco 8600065, 8700017Dim: 1/4-28 Batt. Term.10-24 R-Term.10-24 I-Term.10-24 Remote Sense Term.note: Bidirectional Fan wo/ pulley
SINCE 1961 HEAVY DUTYBY PRECISION REBUILDERS
14
36 model
36 Model Detailed Specifications:
8612NAlternator - Delco 36sI series170 Amp/12 Volt, neg. Ground
Used on: Freightliner, IHC, Kenworth, Peterbilt, Sterling, Volvo, Western Star Trucksreplaces: Delco 8600072, 082, 126, 177; 8700041, 046Dim: 1/4-28 Batt. Term.10-24 R-Term.10-24 I-Term.10-24 Remote Sense Term.
SINCE 1961 HEAVY DUTYBY PRECISION REBUILDERS
15
36 model
8613NAlternator - Delco 36sI series170 Amp/12 Volt, neg. Ground
Used on: Kenworth, Peterbilt Trucks replaces: Delco 8600125, 8700045Dim: 1/4-28 Batt. Term.10-24 R-Term.10-24 I-Term.10-24 Remote Sense Term.notes: Bidirectional Fan wo/ pulley.Includes Remote Sense Terminal.
8614NAlternator - Delco 36sI series170 Amp/12 Volt, neg. Ground
Used on: Freightliner, IHC, Kenworth, Peterbilt, Sterling, Volvo, Western Star Trucksreplaces: Delco 8600127, 8600203, 8700047Dim: 1/4-28 Batt. Term.10-24 R-Term.10-24 I-Term.10-24 Remote Sense Term.note: Bidirectional Fan wo/ pulley.Includes Remote Sense Terminal.
SINCE 1961 HEAVY DUTYBY PRECISION REBUILDERS
16
leeCe neVille
8329NAlternator - 8lHA series / 555160 Amp/12 Volt, wo/ Pulley,
Dual Foot J-180 Mount
Application: Heavy Duty Truck Applications
replaces: Leece-Neville / Motorola 8LHA2070VE, 110-555JHO
temperature limits:-40° F Ambient (Min) +221° F Ambient (Max)
Volts: 12
Amps : 160
rotation Clockwise
Mounting:J-180, Pad Mount Positive stud size:5/16-24 negative stud size: 1/4-28
rectifier location:INTEGRAL
shaft Diameter:.8736-.8741
Pulley:Not Included
Detailed Specifications:
SINCE 1961 HEAVY DUTYBY PRECISION REBUILDERS
17
leeCe neVille
8410NAlternator - 8lHP series / 555PM
160 Amp/12 Volt, wo/ Pulley, 4-Point Pad Mount
Application: Heavy Duty Truck Applicationsreplaces: Leece-Neville / Motorola 8LHP2170VE, 110-555PHO
7613N-LCAlternator - 2800lC series160 Amp/12 Volt, neg. or Pos. Ground, wo/ pulley
Application: Ford School Buses, Trucks w/ Cummins 5.9L (FD1060), 8.3L (FD1460) Enginesreplaces: Leece-Neville 2800LC, A0012800LCFeatures: Latest OE design, stator activated regulator
SINCE 1961 HEAVY DUTYBY PRECISION REBUILDERS
18
load Handler
12715NAlternator - Bosch Ir/IF
200 Amp/12 Volt, CW
Used on: Agco, Case, Caterpillar, Champion, Cummins, Ford Ag & Industrial, John Deere, Massey Ferguson, New Holland, Volvo Trucksreplaces: Bosch 0-124-625-044, AL9963SBDim: M8 x 1.25 Batt. Term. (replaces 5/16)M6 x 1.0 Batt. Term. (replaces 1/4)M5 x 0.8 I-Term.Univ. R-Term.
12716NAlternator - Bosch Ir/IF
200 Amp/12 Volt, CW
Used on: Volvo Trucks w/ Cummins ISM, ISX Diesel Enginesreplaces: Bosch 0-124-625-043, AL9962SB; Mercedes 000-150-19-50Dim: M8 x 1.25 Batt. Term. (replaces 5/16)M6 x 1.0 Batt. Term. (replaces 1/4)M5 x 0.8 I-Term.Univ. R-Term.
HEAVY DUTY STARTERS
SINCE 1961 HEAVY DUTYBY PRECISION REBUILDERS
19
HEAVY DUTY STARTERS
SINCE 1961 HEAVY DUTYBY PRECISION REBUILDERS
20
starter installation instrUCtions WArnInG: ALWAYS USE PROPER EYE PROTECTION WHEN PERFORMING ANY MECHANICAL REPAIRS TO A VEHICLE -INCLUDING, BUT NOT LIMITED TO, ANY INSTALLATION AND OR REPAIRS TO THE STARTER. FAILURE TO USE PROP-ER EYE PROTECTION CAN LEAD TO SERIOUS AND PERMANENT EYE DAMAGE. Only perform the mechanical func-tions that you are properly qualified to perform. Mechanical repairs that are beyond your technical capabilities should be handled by a professional installation specialist.
WArnInG: Disconnect the battery cables, starting with the negative cable, and prior to removal of starter to eliminate ELECTRICAL SHOCK HAZARD.
CAUTION: Remove jewelry before working on electrical system to avoid injury or damage to the system.
BeFore rePlACInG tHe stArter
1. Verify the starter is nonfunctional. The starter can be tested using a carbon pile load tester, a voltmeter and clamp-on style ammeter.
2. Check and follow all safety precautions outlined in the vehicle manufacturer’s service manual.
3. Verify the batteries are fully charged and battery terminals are clean and firmly in place. Check battery cable for any corrosion or tears in the insulation.
4. Verify all fuses are good.
5. Check all wiring connections leading to the starter for discoloration, cracks, or evidence or overheating. If any of these symptoms are present, connections must be replaced. Failure to do so may result in starter or vehicle damage.
reMoVAl InstrUCtIons
1. Disconnect all wire connections and plugs from the starter noting their location and identifying each connec-tor with a piece of tape. This will make installation of the replacement starter easier.
2. Loosen the starter mounting bolts. Note the location of any shims, heat shields, and support brackets. This will also make installation of the replacement starter easier.
3. Remove mounting bolts, tilt or rotate starter to clear flywheel and transmission housing and remove starter from vehicle, noting position of any shims. Shims may be stuck to either the engine mounting or the mounting pads of the starter.
4. Inspect starter drive teeth for damaged pinions. If drive is damaged, it is extremely important that you inspect the flywheel or ring gear for broken or worn teeth. A broken or worn ring gear must be replaced or it will damage the new starter.
InstAllAtIon InstrUCtIons
1. Check and compare the original starter to the replacement starter. All mounting holes wire and plug connec-tors, and hardware should be compatible. Some vehicle manufacturers may use more than one starter manufac-turer. Slight differences in the starter’s appearance will not affect the performance of the starter.
2. Install the replacement starter reusing all mounting hardware from the original starter. Refer to vehicle ser-vice manual and torque nuts and bolts to the manufacturer’s required specifications.
3. Reconnect all electrical connections of the replacement starter to the correct terminals. It is important that all connectors must be clean and fit properly.
4. Reconnect battery cables, connecting positive connections first.
SINCE 1961 HEAVY DUTYBY PRECISION REBUILDERS
21
39 model
6910Nstarter - Delco 39Mt series12 Volt, CW, 12-tooth Pinion
replaces: Delco 8200082, 8200084, 8200287, 8300008, 8300013, 10461773, 19011514, 19011525Used on: Freightliner, Sterling, Western Star w/ Mercedes MBE-4000 Engines Note: Solenoid positioned at 82 degrees.Features:- IMS (Integral Magnetic Switch)- OCP (Overcrank protection)
39 Model Detailed Specifications:
engine size: Diesel: 12V: up to 15 Liters
rotation: Clockwise
standard Mountings: SAE #1, SAE #3
standard Pinions: 11-tooth/6-8 pitch
Weight: 30.8 lbs (14 kg)
Drive: Heavy duty design Electrical Soft-Start Engagement System
overcrank Protection: Built-in circuit breaker protects starter from thermal damage and automatically resets at safe operating temperature
Jump start Protection: Special shield and solenoid cap available to meet SAE J1493 recom-mendations
• MaximumTorquegearingsystemdelivershightorqueoutputandstartingpowerinalowmass,lightweightdesign
• Sealednoselessconfigurationreducesdebrisaccumulationandcontamination-relatedmaintenanceandexpense
• ElectricalSoft-StartEngagementSystemrotatespinionforproperring-gearengagementbeforecranking,minimizing tooth abutment-related damage
• Forgedgearsupportandhighstrengthsteelshaftsprovidesuperiordurability
• LabyrinthdrainhousingdesignutilizesmultipledrainpointswithO-Ringsealsforprotectionfromenvironmentalcontaminants
• Heavydutybearingandbushingsystemincreasesmotorlifeandreliability
• Castaluminumdriveandcommutatorendhousingsprovidehighstrength,lightweightconstruction
• OCP(OvercrankProtection)protectsstarterfromthermaldamageandautomaticallyresetsafterreachingasafeoperating temperature
SINCE 1961 HEAVY DUTYBY PRECISION REBUILDERS
39 model
6911Nstarter - 39 Model
12 Volt, CW, 11-tooth Pinion, oCP thermostat
Application: Caterpillar C15, Cummins ISX, Detroit Diesel S60, Freightliner, International, Volvo Truckreplaces: Delco 8200033, 040, 083, 289; 8300009; 10461753, 10461777; 19011506, 516, 518, 519, 521notes: Solenoid positioned at 82°.Features: IMS (Integral Magnetic Switch)OCP (Overcrank protection)
22
6912Nstarter - Delco 39Mt series12 Volt, CW, 11-tooth Pinion
replaces: Delco 8200050, 8200090, 8200104, 8200290 Used on: Kenworth, Peterbilt w/ Caterpillar C9, C10, C11, C12, C15; Cummins ISM, ISX Diesel EnginesFeatures: - IMS (Integral Magnetic Switch)- OCP (Overcrank protection)Note: Solenoid positioned at 82 degrees.
SINCE 1961 HEAVY DUTYBY PRECISION REBUILDERS
39 model
23
6914Nstarter - Delco 39Mt series12 Volt, CW, 11-tooth Pinion,
oCP thermostat
replaces: Delco 8200037, 288; 8300020; 19011500, 505, 531; 10461334Used on: Mack Trucks E-7
notes: Solenoid positioned at 52 degrees.
6913Nstarter - Delco 39Mt series12 Volt, CW, 12-tooth Pinion
replaces: Delco 8200186, 8200291, 8300004, 19011515Used on: Volvo Trucks D12Features:- IMS (Integral Magnetic Switch - OCP (Overcrank protection)
SINCE 1961 HEAVY DUTYBY PRECISION REBUILDERS
24
39 model
6907Nstarter - Delco 39Mt series 12 Volt, CW, 12-tooth Pinion rotatable nose, oCP & IMs
Application: Navistar Cummins Enginesreplaces: Cummins3102919,Delco Remy10461760,10461769,19011510,19011513,19011515,19011517,19011526,8200028,8200030,8200042,8200045,8200058,8200072,8200081,8200085,8200087,8200182,8200186,8200218,8200219,8200291,8200360,8200433,8200469,8300061,Denso 428000-5430,Freightliner MITIN1378,MitsubishiM009T70279,M9T70279,M9T72078,Volvo20430285,20520903,21001825,85103338,VV0279
6867Nstarter - Delco 39Mt series 12 Volt, CW, 11-tooth Pinion rotatable nose, oCP & IMs
Application: Freightliner, Sterling, Western Star, Kenworth, Peterbilt, Mack and Volvo replaces: Delco Remy19011518,19011521,19011529,19011530,19011500,19011505,19011531,19011516,10461777,8300019,8300009,8300020
SINCE 1961 HEAVY DUTYBY PRECISION REBUILDERS
25
6924Nstarter - Delco 39Mt series 12 Volt, CW, 11-tooth Pinion rotatable nose, oCP & IMs
Application: Navistar Cummins Engines replaces: Cummins3103304,3103915,Delco Remy 10461334,10461753,10461755,10461777,19011500,19011505,19011506,19011508,19011516,19011518,19011519,19011521,19011529,19011530,19011531,8200031,8200033,8200037,8200038,8200040,8200050,8200088,8200090,8200091,8200104,8200288,8200289,8200290,8200308,Denso 428000-1211,428000-1220,428000-1221,428000-4420,428000-4430,428000-4440,428000-5190,428000-5730,FL0579,FL0777,FL0975,M93579,MIB97059,MIB97059FL,MIB970777,MIB970975,Mack Truck8MJ4298AM,8MJ5439M,MK0077,MK1075,MK1078,MK2078,MitsubishiM009T70579,M009T70979,M9T70579,M9T70979,Navistar815734C91,IN0976,IN1478,PAC-CAR D61-6002-004D61-6002-008,PeterbiltPC0779,PC0979,PC1379,PC1479,PC1579,PC1779,PC1879,Prestolite (Leece-Neville) M125601,MS2-500,MS2-501,MS2-502,MS2-503,MS2-504,MS2-507,MS2-507,MS2-509,MS2-510,MS2-511,MS2-514,Volvo20851006,VV0776,VV0977,VV0979,VV1076,VV1979,VV2079
39 model
SINCE 1961 HEAVY DUTYBY PRECISION REBUILDERS
26
6356Nstarter - 42 Model
12 Volt, CW, 12-tooth Pinion
replaces: Delco 1990483 & others; Delco Reman. 10461052 note: Solenoid positioned at 82°.
engine size: Diesel: up to 14.8 liters up to 900 cu. in.
system Voltage: 12 Volts
rotation: Clockwise or Counterclockwise
standard Pinions: 11-tooth/6-8 pitch,
Weight: 58 lbs (26.3 kg)
rotatable Drive Housing: Two-piece rotatable drive housing
Drive: Heavy duty design Positive engagement Rubber shock absorber
overcrank Protection: (optional) Prevents overcrank heat damage Circuit breaker automatically resets after it has cooled
Jump start Protection: (optional) Special shield and solenoid cap available to meet SAE J1493 recommendations
42 Model Detailed Specifications:
6371nstarter - 42 Model
12 Volt, CW, 12-tooth Pinion
replaces: Caterpillar 0R5218, 7N6503, 9L3597; Cummins 3603864RX, 3910645; Delco 1990353, 356, 362, 370, 379, 385, 387, 394, 399, 403, 404, 405, 425, 429, 441, 443, 452, 467, 469, 471, 480, 487, 492, 496;1993772, 775, 783, 795, 806, 820, 935, 937, 938, 939, 942, 943, 961, 983; 10478803, 804, 835, 931, 934, 936, 992, 994, 10479004, 10479052, 10479117, 10479162, 10479191; Delco Reman. 10461021; IHC 430138C91, 673796C92
42 model
SINCE 1961 HEAVY DUTYBY PRECISION REBUILDERS
27
6513Nstarter - 42 Model
12 Volt, CW, 11-tooth Pinion, w/ oCP thermostat
replaces: Delco 1990428 & others; Delco Reman. 10461055note: Solenoid positioned at 82°.
6554Nstarter - 42 Model
12 Volt, CW, 11-tooth Pinion, oCP thermostat
Application: Freightliner, IHC, Kenworth, Peterbilt, Sterling, Volvo, Western Starreplaces: Delco 1990489, 10461062, 10461075, 10479080, 10479105notes: Solenoid positioned at 88°.
42 model
6370Nstarter 42Mt series
24 Volt, CW, 11-tooth Pinionreplaces: Delco 1990456, 1990485 & others; Delco Reman. 10461024
SINCE 1961 HEAVY DUTYBY PRECISION REBUILDERS
r5 model
19503Nstarter - r5 series osGr
5.0KW/12 Volt, CW, 10-tooth Pinionreplaces: Denso 428000-444Used on: Freightliner, International, Kenworth, Peterbilt, Sterling, Volvo Truck w/ Cummins N14 Engines; Freightliner, International w/ Cummins ISX Engines
19502N
starter - r5 series osGr 5.0KW/12 Volt, CW, 10-tooth Pinion
replaces: Denso 428000-443Used on: Freightliner, International, Kenworth, Peterbilt, Sterling, Volvo Truck w/ Cummins M11 Engines; Freightliner, International, Kenworth, Sterling, Volvo Truck w/ Detroit Diesel S60 Engines; Mack E-Tech, E-7
28
SINCE 1961 HEAVY DUTYBY PRECISION REBUILDERS
r5 model
19501Nstarter - Denso r5 series osGr
5.0kW/12 Volt, CW, 10-tooth Pinion
Used on: Freightliner, International, Kenworth, Peterbilt, Sterling, Volvo Truck w/ Caterpillar C11, C13, C15; Cummin ISM Enginesreplaces: Denso 428000-442
29
SINCE 1961 HEAVY DUTYBY PRECISION REBUILDERS
notes
____________________________________________________________________ ____________________________________________________________________ ____________________________________________________________________ ____________________________________________________________________ ____________________________________________________________________
____________________________________________________________________
____________________________________________________________________ ____________________________________________________________________ ____________________________________________________________________ ____________________________________________________________________ ____________________________________________________________________
SINCE 1961 HEAVY DUTYBY PRECISION REBUILDERS
notes
____________________________________________________________________ ____________________________________________________________________ ____________________________________________________________________ ____________________________________________________________________ ____________________________________________________________________
____________________________________________________________________
____________________________________________________________________ ____________________________________________________________________ ____________________________________________________________________ ____________________________________________________________________ ____________________________________________________________________
SINCE 1961 HEAVY DUTYBY PRECISION REBUILDERS
www.precisionrebuilders.com
V.0613