Vde Ecodesign Rome 2009
8
Energy using Products (EuP): Requirements for Ecodesign Rome, December 3rd, 2009 Frank Rheiner VDE Testing and Certification Institute [email protected] www.vde-institut.com
-
Upload
tecnoimprese -
Category
Technology
-
view
1.057 -
download
1
description
Transcript of Vde Ecodesign Rome 2009
Energy using Products (EuP):
Requirements for Ecodesign
Rome, December 3rd, 2009
Frank Rheiner
VDE Testing and Certification Institute
www.vde-institut.com
Ecodesign Directive
energy efficiency / environmental
protectionLegislation
Consumers
Manufacturer
The Directive 2009/125/EC (former 2005/32/EC) of the European
Parliament and of the Council establishes a framework for the setting of
ecodesign requirements for energy-related products.
Goal:
To contribute to sustainable development by increasing energy efficiency
and the level of protection of the environment,
while at the same time increasing the security of the energy supply.
Structure of regulative framework ─ Standards and Directives
DIN EN ISO 14040 : 2006Environmental Management –Lifecycle Assessment
DIN IEC 62430 Ed.1.0Environmentally Conscious Design for Electrical and Electronic Products
IEC 62075:2008 - EN 62075Audio/Video, IT and Communica-tion Appliances- Environmentally Conscious Design
Generic
requirements
Sector
specific
requirements
Industry
specific
requirements
Standards – Normative elements Directives – Legal elements
Implementing measures:Definition of Ecodesignrequirements
Directive 2002/96/EC - WEEEwaste electrical and electronic equipment (WEEE) -Directive 2002/95/EC - RoHSRestriction of the use of certainhazardous substances in in electrical and electronic equipment
Directive 2009/125/ECFramework for the setting of Ecodesign requirements for the design of energy-related products
Directive 2009/125/EC:
"Ecodesign" means the integration of environmental aspects into
product design with the aim of improving the environmental
performance of the product throughout its whole life cycle.
DIN IEC 62430:
“The goal of environmentally conscious design is the reduction of adverse
environmental impacts of a product throughout its entire life cycle.”
Definition Ecodesign
Design Production Transport Use End of Life
Life Cycle Assessment
Life Cycle Assessment (LCA): Optimization of ecodesign parameters
� Demonstration of improvements possible regarding
� Selection of Materials and Processes
� Place of manufacturing
� Packaging Materials
� Energy Efficiency
� Recyclability
� LCA allows long term cost savings by selection of
reduced energy/CO2 manufacturing and materials
� LCA provides marketing arguments and makes
Ecodesign transparent to the customer
• Improvement between Product Generations
• Comparison of two products with similar functionality
Product A Product B
kg CO2
Source: www.eup-network.de
Status as of November 17, 2009
Implementing measures
Eco design
� Life Cycle Assessment
� Chemical product analysis (Material declaration, REACH, RoHS, WEEE)
Energy
� Energy efficiency measurements
� Stand-by-Measurements
Audits� Environmental managements systems
� Quality management systems
Additional services� Marks for environmental friendly, energy efficient and quality products
� Noise emission measurements
� EMC measurements
� Environmental tests (Accelerated lifetime tests)
VDE services for environmental protection
VQuality Tested
ID. 49000000
VQuality Tested
VQuality Tested
ID. 49000000
high performance
energy efficient
low noise
VDE Italy – Your local partner
Thank you for your attention!
VDE Italia
c/o Centro Commerciale Vulcano
Piazza Privata Francesco Caltagirone, 75
I-20099 Sesto San Giovanni (MI)
Tel: +39 0 22 483 9178
Fax: +39 0 22 409 287
