VC Catalogue Book - ventilationcentre.co.uk · Flange systems Circular flanges 53 ... Ductmate...
Transcript of VC Catalogue Book - ventilationcentre.co.uk · Flange systems Circular flanges 53 ... Ductmate...
Head Office8 Downgate DriveSheffield S4 8BT
Tel: 0114 256 7300Fax: 0114 256 7301Email: [email protected]
Ventilation Centre SheffieldUnit 14 Riverside CourtDon RoadSheffield S9 2TJ
Tel: 0114 242 5377Fax: 0114 261 0495Email: [email protected]
Ventilation Centre HullUnit E Venture Business ParkWitty StreetHull HU3 4TT
Tel: 01482 212982Fax: 01482 212998Email: [email protected]
Ventilation Centre LeedsUnit 10 United Business ParkLowfields RoadLeeds LS12 6UB
Tel: 0113 234 1871Fax: 0113 234 1872Email: [email protected]
Ventilation Centre StockportUnit 7 Bredbury CourtAshton RoadStockportSK6 2QB
Tel: 0161 494 8600Fax: 0161 494 6166Email: [email protected]
Ventilation Centre Nottingham1 Tannery RoadGiltbrook Industrial ParkNottinghamNG16 2WP
Tel: 0115 xxx xxxxFax: 0115 xxx xxxxEmail: [email protected]
PRICE LIST2009 OVER 500PRODUCTSINSIDE
2009 PRICE LIST
Whilst every effort has been made to ensure that the prices and information contained within this publication are correct, Ventilation Centre Limitedcannot accept liability in respect of any loss or damage arising from any errors or omissions.
All rights reserved. The copyright and intellectual rights of this publication are owned by Ventilation Centre Limited, it’s partners or third party licensors. No part of this publication may be reproduced or transmitted in any form or by any means without prior written consent.
© 2009 Ventilation Centre Limited
Visit us online, and as well as our site being packed with useful information, you can take advantage of our current range of promotions and offers - defi nitely worth a visit.
Promotions and off ers
www.ventilationcentre.co.uk
Open a trading accountAnd have the use of up to 60 days credit, trade discounts and exclusive offers. To apply, contact your local trade centre for an application form or download at:
www.ventilationcentre.co.uk/application.asp
Reducing grilleprices
For more details, see page 55
Ductmate slide-on fl ange system
Ductmate slide-on fl ange system
Now available
Low cost range in stock
Welcome to the 2009 edition of the Ventilation Centre price list. Together with our existing range we’ve included a number of new products, all of which are in stock and available with trade discounts.
You’ll also fi nd our trade centres are well stocked with a wide variety of products which can be collected or delivered same day, and with 7:30am and Saturday opening, you can be sure that we’re around when you need us.
To fi nd out more about how we can make a real difference when buying your ventilation products, and for a better deal, call into your local trade centre today.
Your single source for duct air system products
Product Page(s)
Ducting systems Spiraduct system 2-9Clipduct system 10-14Domestic duct systems 15-21
Fans & controls Elta fans 22-25
Grilles & diffusers Aluminium grilles & diffusers 26-35Aircell polymer grilles & diffusers 36-37Direct mount grilles 38-39Pressed steel grilles & diffusers 40Architectural diffusers 41-42Plenums 43-44
Flexible ducts & hoses General HVAC types 45Industrial types 46Specialist types 47
Flue systems & flashings Single wall flue 48MD plus range - twin wall flue 49-50Flue liner 51Terminals 51Masterflash 52
Flange systems Circular flanges 53Doby flange system 54Xcel flange 54Ductmate flange system 55
Acoustic & thermal Circular silencers 56Insulation materials 57
Control dampers Fire dampers 58-62Volume control dampers 63-65Fire blocks 66
Filters & casings Air filters 67-68Grease filters 69Kitchen canopy 70Cleaning system 70
Supports & fixings Support brackets 71Channel support system 72-74Gripple hangers 75-77Fixings 77-78
Ancillaries Access doors 79Tapes & sealants 80General products 81-83
Contents
We accept company cheques and most major credit/debit cards
Payment
Ventilation Centre’s duct manufacturing division provides a full service working from your initial drawing through to production and timed on-site delivery.
For information and quotations, contact your local trade centre.
Contracting made simple with our low cost duct system
The Select Range
Ask for a copy of the 4th edition catalogue
Sales and product information is available at www.ventilationcentre.co.ukSizes are nominal unless shown otherwise. Prices exclude delivery and VAT. Subject to our terms and conditions of sale. 2
Ømm
0.5mm gauge 0.6mm gauge 0.8mm gauge 1mm gauge 1.2mm gauge
Metre Length Metre Length Metre Length Metre Length Metre Length
80 3.42 10.26
100 4.14 12.42
125 5.17 15.51
150 6.09 18.27
160 6.68 20.04
180 9.73 29.19
200 9.83 29.49
224 12.14 36.42
250 12.27 36.81
280 14.58 43.74
300 14.72 44.16
315 16.10 48.30
355 23.45 70.35
400 26.43 79.29
450 29.76 89.28
500 34.27 102.81
560 40.56 121.68
630 43.16 129.48
710 49.12 147.36
800 55.38 166.14
900 78.93 236.79
1000 87.63 262.89
1120 123.06 369.18
1250 136.85 410.55
1320 144.43 433.29
1422 155.57 466.71
1524 166.70 500.10
1600 175.07 525.21
Non-standard lengths are subject to a surcharge
• Manufactured from galvanised mild steel• Conforms to specification DW144
SL
Spiral ductStandard 3m length
Order code example SL 150 3000 0.5
(diameter) (length) (gauge)
Spiraduct system
Spiraduct system
3Sales and product information is available at www.ventilationcentre.co.ukSizes are nominal unless shown otherwise. Prices exclude delivery and VAT. Subject to our terms and conditions of sale.
B90 B60 B45 B30 B15 BL90 BL45
Ømm
Bend90˚
Bend60˚
Bend45˚
Bend30˚
Bend 15˚
Long radiusbend 90˚
Long radiusbend 45˚
80 7.72 8.85 6.42 5.75 8.39 17.51 20.91
100 9.36 9.82 7.13 6.39 9.32 21.84 24.63
125 10.61 10.94 8.16 7.73 10.18 24.92 25.59
150 14.23 17.21 10.46 10.43 12.74 32.02 33.63
160 15.43 19.46 11.43 11.75 14.80 34.05 36.09
180 20.82 22.56 14.36 14.54 14.95 47.50 47.20
200 21.02 22.78 14.49 14.68 15.09 50.88 49.93
BF90 BF60 BF45 BF30 BF15 BLF90 BLF45
Ømm
Bend90˚
Bend60˚
Bend45˚
Bend30˚
Bend15˚
Long radiusbend 90˚
Long radiusbend 45˚
224 31.79 35.00 21.76 23.67 25.30 87.46 83.68
250 32.11 38.87 21.97 23.91 26.04 89.28 85.09
280 39.64 50.71 30.00 33.59 33.59 118.76 107.28
300 40.04 51.22 30.31 33.93 33.93 119.95 108.38
315 44.08 53.27 31.42 35.28 35.28 140.27 124.36
355 45.96 56.73 34.50 40.25 37.70 140.59 130.14
400 55.19 57.29 40.84 40.67 38.08 146.83 144.76
450 63.03 57.87 46.76 41.08 38.47 152.31 145.61
500 72.53 58.45 51.23 46.44 43.17 154.39 146.27
560 100.26 82.41 72.84 64.91 59.87 169.25 152.50
630 115.56 94.81 79.85 70.81 64.56 199.02 152.92
710 222.95 198.64 149.20 130.04 120.09 328.65 210.81
800 259.49 229.72 172.37 149.57 137.00 383.85 244.36
900 307.88 270.58 202.68 174.95 158.70 463.74 292.77
1000 556.90 442.34 403.12 337.53 317.44 799.44 502.88
1120 858.43 613.57 576.61 448.11 417.50 1,131.64 654.60
1250 985.02 702.19 656.15 528.36 482.32 1,309.49 811.97
Pressed bendsr = 1 x Ø to centreline, BL90/45 r = 1.5 x Ø to centreline
Fabricated bendsr = 1 x Ø to centreline, BLF90/45 r = 1.5 x Ø to centreline
Sales and product information is available at www.ventilationcentre.co.ukSizes are nominal unless shown otherwise. Prices exclude delivery and VAT. Subject to our terms and conditions of sale. 4
Spiraduct system
MC FC EC ECF ECFH IL
Ømm
Malecoupling
Femalecoupling
End cap for duct
End cap for fitting
End cap with handle
Take-off
80 3.34 3.34 3.61 4.22 7.01 5.15100 3.32 3.32 3.65 4.26 7.01 5.20125 3.45 3.45 3.87 5.15 7.95 5.54150 3.50 3.50 4.23 5.58 8.27 5.83160 3.67 3.67 4.34 5.87 9.58 6.14180 3.83 3.83 4.70 6.58 9.87 7.59200 3.86 3.86 4.73 6.65 9.95 7.65224 4.99 4.99 6.98 10.05 11.54 9.45250 5.18 5.18 7.05 10.78 12.39 9.48280 6.28 6.28 10.58 15.10 17.41 12.53300 6.35 6.35 10.67 15.27 18.98 12.66315 6.92 6.92 11.69 15.82 20.97 12.87355 8.21 8.21 15.42 27.27 31.04 14.39400 10.31 10.31 17.10 32.32 38.64 15.41450 11.66 11.66 20.99 44.14 50.82 20.73500 13.72 13.72 24.42 46.57 53.75 23.10560 18.57 18.57 33.62 60.89 63.92 29.34630 20.24 20.24 38.48 63.86 66.35 32.11710 40.23 40.23 41.58800 46.44 46.44 52.04900 51.96 51.96 58.261000 55.57 55.57 87.971120 80.79 80.79 107.471250 87.95 87.95 114.71
DB U J Y90 Y45
Ømm
BalancingDamper
Universal cowl
Jet Cowl
Twin bend90˚
Twin bend45˚
80 30.94 31.79 138.12 46.32 58.82100 31.25 32.11 139.50 46.79 59.40125 33.31 34.58 144.90 54.85 66.01150 34.57 35.81 158.49 73.22 68.63160 36.26 37.06 165.30 77.80 73.90180 38.16 48.86 166.94 116.67 87.45200 38.55 49.37 172.08 117.85 88.33224 48.30 59.68 194.72 196.16 134.06250 48.79 60.27 196.66 198.14 135.40280 55.82 77.20 217.35 248.84 158.40300 56.39 80.04 219.53 251.35 159.99315 57.38 86.86 249.05 264.31 170.24355 76.22 108.18 251.54 322.98 177.55400 78.06 109.27 294.34 326.24 179.34450 99.66 110.36 346.42 329.54 181.16500 118.74 111.47 407.54 332.87 183.00560 140.17 127.09 452.82 336.23 237.79630 152.43 140.91 489.04 385.74 269.06710 661.58 437.96800 780.71 508.39900 992.23 646.731000 1,320.25 819.831120 1,662.39 1,129.711250 1,913.05 1,313.41
FittingsFor spiral duct
Spiraduct system
5Sales and product information is available at www.ventilationcentre.co.ukSizes are nominal unless shown otherwise. Prices exclude delivery and VAT. Subject to our terms and conditions of sale.
Ød1
mm
Ød2 mm
80 100 125 150 160 180 200 224 250 280 300 315
100 18.51
125 19.46 18.65
150 20.66 20.10 19.91
160 22.08 21.61 21.39 20.76
180 24.07 23.83 23.59 23.37 23.14
200 24.70 24.46 24.21 23.98 23.73 23.46
224 30.26 29.95 29.66 29.36 28.73 28.45 28.17
250 33.29 32.96 32.64 32.31 32.00 31.68 31.37 31.05
280 39.41 39.01 38.62 38.26 37.87 37.49 37.13 36.75 36.39
300 40.08 39.68 39.31 38.92 38.53 38.14 37.77 37.40 36.86 36.50
315 40.76 40.36 39.96 39.56 39.16 38.77 38.38 38.01 37.64 37.26 36.08
355 45.29 44.84 44.40 43.96 43.53 43.10 42.67 42.25 41.83 38.82 38.43
400 51.62 51.11 50.60 50.10 49.61 49.12 48.62 48.14 47.67 46.95 46.48
450 59.33 58.74 58.16 57.59 57.02 56.46 55.90 55.34 54.79 54.25 53.72
500 66.75 66.08 65.43 64.78 64.14 63.50 62.87 62.26 61.64 61.02 60.42
560 81.02 80.22 79.43 78.64 77.86 77.09 76.32 75.57 74.83
630 89.03 88.15 87.28 86.42 85.56 84.72 83.87 83.05 82.22
710 127.26 126.00 124.76 123.53 122.31 121.09 119.89 118.71 117.52
800 144.78 143.34
Ød1
mm
Ød2 mm
355 400 450 500 560 630 710 800 900 1000 1120
400 46.02
450 53.19 52.65
500 59.83 59.24 58.65
560 74.08 73.36 72.63 71.91
630 81.41 80.60 79.80 79.02 78.23
710 116.37 115.22 114.07 112.94 111.82 110.72
800 141.91 140.52 139.13 137.75 136.39 135.03 134.89
900 175.76 174.02 172.30 170.60 168.91 168.23
1000 218.56 216.41 214.27 212.15 211.52 209.33
1120 314.83 311.72 308.62 305.57 302.55 299.56 296.59
1250 403.51 399.51 395.55 391.63 387.76 383.93 380.12
ReducersConcentric/Eccentric
Order code example RC 250 150
(d1) (d2)
RE Prices +50%
d2d1 d2
d1RC
Sales and product information is available at www.ventilationcentre.co.ukSizes are nominal unless shown otherwise. Prices exclude delivery and VAT. Subject to our terms and conditions of sale. 6
Spiraduct system
Ød1
mm
Ød3 mm
80 100 125 150 160 180 200 224 250 280 300 315
80 21.73
100 21.84 22.05
125 24.07 24.31 24.55
150 31.07 31.39 31.70 32.03
160 31.71 32.04 32.37 32.70 33.03
180 31.87 32.20 32.52 32.85 33.18 33.52
200 41.49 41.90 42.32 42.75 43.18 43.62 44.06
224 58.51 59.11 59.70 60.30 60.92 61.53 62.14 62.77
250 58.80 59.40 60.00 60.60 61.22 61.83 62.46 63.09 63.73
280 74.78 75.53 76.30 77.06 77.84 78.63 79.43 80.22 81.03 81.85
300 76.63 77.41 78.20 78.98 79.77 80.58 81.41 82.23 83.05 83.90 84.74
315 77.01 77.79 78.57 79.36 80.16 80.97 81.79 82.62 83.45 84.29 85.15 86.01
355 78.95 79.75 80.56 81.37 82.19 83.03 83.86 84.71 85.56 86.43 87.30
400 80.13 80.94 81.76 82.59 83.43 84.26 85.12 85.97 86.84 87.72 88.60
450 81.34 82.16 82.99 83.83 84.67 85.53 86.40 87.26 88.14 89.03 89.94
500 87.78 88.68 89.57 90.47 91.40 92.31 93.24 94.18 95.13 96.10 97.07
560 105.77 106.84 107.92 109.02 110.11 111.22 112.34 113.48 114.62
630 120.50 121.72 122.96 124.20 125.46 126.73 128.00 129.30 130.60
Ød1
mm
Ød3 mm
80 100 125 150 160 180 200 224 250 280 300 315
80 5.74
100 5.74 5.84
125 5.74 5.84 6.76
150 5.74 5.84 6.76 8.73
160 5.74 5.84 6.76 8.73 9.57
180 5.74 5.84 6.76 8.73 9.57 11.57
200 5.74 5.84 6.76 8.73 9.57 11.57 12.17
224 5.74 5.84 6.76 8.73 9.57 11.57 12.17 16.09
250 5.74 5.84 6.76 8.73 9.57 11.57 12.17 16.09 18.83
280 5.74 5.84 6.76 8.73 9.57 11.57 12.17 16.09 18.83 27.34
300 5.74 5.84 6.76 8.73 9.57 11.57 12.17 16.09 18.83 27.34 27.61
315 5.74 5.84 6.76 8.73 9.57 11.57 12.17 16.09 18.83 27.34 27.61 27.89
355 5.74 5.84 6.76 8.73 9.57 11.57 12.17 16.09 18.83 27.34 27.61 27.89
400 5.74 5.84 6.76 8.73 9.57 11.57 12.17 16.09 18.83 27.34 27.61 27.89
450 5.74 5.84 6.76 8.73 9.57 11.57 12.17 16.09 18.83 27.34 27.61 27.89500 5.74 5.84 6.76 8.73 9.57 11.57 12.17 16.09 18.83 27.34 27.61 27.89560 5.74 5.84 6.76 8.73 9.57 11.57 12.17 16.09 18.83 27.34 27.61 27.89
630 5.74 5.84 6.76 8.73 9.57 11.57 12.17 16.09 18.83 27.34 27.61 27.89
Pressed tee/cross 90˚ Order code example TP 250 150
(d1) (d3)
Pressed saddle 90˚ Order code example PS 250 150
(d1) (d3)
d1
d3
TP XP Prices +50% d1
d3
PS
d3
d1
Spiraduct system
7Sales and product information is available at www.ventilationcentre.co.ukSizes are nominal unless shown otherwise. Prices exclude delivery and VAT. Subject to our terms and conditions of sale.
Ød3 mm
80 100 125 150 160 180 200 224 250 280 300 315 355 400 450 500 560 630
18.60 18.80 19.32 22.16 25.10 29.89 30.54 38.59 39.20 47.34 48.40 51.63 60.05 69.34 82.89 91.09 115.01 136.31
Ød1
mm
Ød3 mm
80 100 125 150 160 180 200 224 250 280 300 315 355 400 450 500 560 630
80 23.78
100 23.78 24.02
125 23.78 24.02 24.90
150 23.78 24.02 24.90 29.28
160 23.78 24.02 24.90 29.28 32.97
180 23.78 24.02 24.90 29.28 32.97 36.30
200 23.78 24.02 24.90 29.28 32.97 36.30 36.46
224 23.78 24.02 24.90 29.28 32.97 36.30 36.46 41.65
250 23.78 24.02 24.90 29.28 32.97 36.30 36.46 41.65 42.10
280 23.78 24.02 24.90 29.28 32.97 36.30 36.46 41.65 42.10 48.36
300 23.78 24.02 24.90 29.28 32.97 36.30 36.46 41.65 42.10 48.36 48.48
315 23.78 24.02 24.90 29.28 32.97 36.30 36.46 41.65 42.10 48.36 48.48 52.20
355 23.78 24.02 24.90 29.28 32.97 36.30 36.46 41.65 42.10 48.36 48.48 52.20 70.50
400 23.78 24.02 24.90 29.28 32.97 36.30 36.46 41.65 42.10 48.36 48.48 52.20 70.50 79.92
450 23.78 24.02 24.90 29.28 32.97 36.30 36.46 41.65 42.10 48.36 48.48 52.20 70.50 79.92 92.22
500 23.78 24.02 24.90 29.28 32.97 36.30 36.46 41.65 42.10 48.36 48.48 52.20 70.50 79.92 92.22 105.54
560 23.78 24.02 24.90 29.28 32.97 36.30 36.46 41.65 42.10 48.36 48.48 52.20 70.50 79.92 92.22 105.54 131.30
630 23.78 24.02 24.90 29.28 32.97 36.30 36.46 41.65 42.10 48.36 48.48 52.20 70.50 79.92 92.22 105.54 131.30 175.47
Curved boot 90˚ Order code example TBSC 250 150
(d1) (d3)
Flat boot 90˚
TBSC
d3
d1
TBSFd3
Sales and product information is available at www.ventilationcentre.co.ukSizes are nominal unless shown otherwise. Prices exclude delivery and VAT. Subject to our terms and conditions of sale. 8
Ød1
mm
Ød3 mm
80 100 125 150 160 180 200 224 250 280 300 315 355 400 450 500 560 630
80 45.88
100 46.11 46.58
125 52.28 52.81 53.34
150 60.20 60.82 61.44 62.05
160 64.11 64.76 65.41 66.07 66.73
180 64.43 65.08 65.73 66.40 67.08 67.75
200 64.76 65.41 66.07 66.73 67.41 68.09 68.78
224 68.65 69.35 70.04 70.75 71.47 72.19 72.92 73.65
250 70.83 71.54 72.27 72.99 73.74 74.48 75.24 75.98 76.76
280 78.52 79.31 80.12 80.93 81.74 82.57 83.40 84.24 85.09 85.95
300 79.21 80.00 80.81 81.62 82.46 83.29 84.12 84.98 85.84 86.69 87.57
315 112.08 113.22 114.36 115.50 116.68 117.85 119.04 120.25 121.46 122.69 123.93 125.18
355 113.99 115.73 117.49 119.28 121.10 122.95 124.82 126.71 128.64 130.60 132.59 134.61
400 128.47 130.44 132.42 134.44 136.48 138.57 140.67 142.83 145.00 147.20 149.44 151.72 154.03
450 136.89 138.98 141.09 143.25 145.42 147.63 149.88 152.17 154.48 156.84 159.22 161.64 164.11 166.61
500 169.28 171.85 174.47 177.13 179.82 182.56 185.34 188.16 191.02 193.93 196.89 199.88 202.93 206.03 209.16
560 188.57 192.42 196.34 200.34 204.44 208.62 212.87 217.22 221.65 226.17 230.78 235.50 240.30 245.20
630 208.78 213.03 217.38 221.82 226.34 230.95 235.68 240.49 245.39 250.40 255.50 260.72 266.04 271.47 277.01
Ød1
mm
Ød3 mm
80 100 125 150 160 180 200 224 250 280 300 315 355 400 450 500 560 630
80 43.98
100 44.19 44.64
125 49.70 50.21 50.71
150 56.72 57.29 57.87 58.45
160 63.09 63.72 64.37 65.02 65.67
180 63.39 64.03 64.68 65.34 66.00 66.66
200 63.67 64.32 64.96 65.63 66.29 66.95 67.62
224 73.65 74.41 75.15 75.91 76.69 77.46 78.24 79.03
250 78.61 79.41 80.20 81.01 81.83 82.65 83.50 84.33 85.19
280 92.80 93.75 94.69 95.66 96.63 97.59 98.58 99.58 100.58 101.59
300 95.85 96.81 97.79 98.78 99.78 100.78 101.80 102.83 103.87 104.92 105.98
315 103.61 104.67 105.72 106.79 107.86 108.95 110.04 111.16 112.28 113.42 114.57 115.73
355 105.32 106.93 108.54 110.19 111.87 113.57 115.31 117.07 118.85 120.65 122.50 124.36
400 118.08 119.88 121.70 123.55 125.44 127.34 129.28 131.25 133.25 135.28 137.33 139.42 141.56
450 124.73 126.62 128.56 130.52 132.49 134.51 136.57 138.65 140.76 142.91 145.08 147.29 149.52 151.80
500 153.80 156.14 158.52 160.94 163.38 165.87 168.39 170.96 173.56 176.21 178.89 181.60 184.37 187.19 190.03
560 180.37 184.06 187.81 191.64 195.56 199.54 203.62 207.77 212.01 216.34 220.76 225.26 229.86 234.54
630 199.71 203.79 207.96 212.19 216.53 220.95 225.45 230.05 234.74 239.54 244.42 249.41 254.50 259.69 264.99
Conical tee/cross 90˚ Order code example TC 250 150
(d1) (d3)
Tee/cross 45˚ Order code example TV 250 150
(d1) (d3)
XC Prices +50%
TV
Spiraduct system
TC d1
d3
d1
d3
XV Prices +50%
d1
d3
d3
d1
d3
Spiraduct system
9Sales and product information is available at www.ventilationcentre.co.ukSizes are nominal unless shown otherwise. Prices exclude delivery and VAT. Subject to our terms and conditions of sale.
Ød1
mm
Ød3 mm
80 100 125 150 160 180 200 224 250 280 300 315 355 400 450 500 560 630
80 30.02
100 30.02 30.33
125 30.02 30.33 30.97
150 30.02 30.33 30.97 31.28
160 30.02 30.33 30.97 31.28 34.32
180 30.02 30.33 30.97 31.28 34.32 35.06
200 30.02 30.33 30.97 31.28 34.32 35.06 35.41
224 30.02 30.33 30.97 31.28 34.32 35.06 35.41 38.61
250 30.02 30.33 30.97 31.28 34.32 35.06 35.41 38.61 40.40
280 30.02 30.33 30.97 31.28 34.32 35.06 35.41 38.61 40.40 48.38
300 30.02 30.33 30.97 31.28 34.32 35.06 35.41 38.61 40.40 48.38 48.43
315 30.02 30.33 30.97 31.28 34.32 35.06 35.41 38.61 40.40 48.38 48.43 57.06
355 30.02 30.33 30.97 31.28 34.32 35.06 35.41 38.61 40.40 48.38 48.43 57.06 62.79
400 30.02 30.33 30.97 31.28 34.32 35.06 35.41 38.61 40.40 48.38 48.43 57.06 62.79 72.37
450 30.02 30.33 30.97 31.28 34.32 35.06 35.41 38.61 40.40 48.38 48.43 57.06 62.79 72.37 77.70
500 30.02 30.33 30.97 31.28 34.32 35.06 35.41 38.61 40.40 48.38 48.43 57.06 62.79 72.37 77.70 84.55
560 30.02 30.33 30.97 31.28 34.32 35.06 35.41 38.61 40.40 48.38 48.43 57.06 62.79 72.37 77.70 84.55 111.84
630 30.02 30.33 30.97 31.28 34.32 35.06 35.41 38.61 40.40 48.38 48.43 57.06 62.79 72.37 77.70 84.55 111.84 126.25
Ød1
mm
Ød3 mm
80 100 125 150 160 180 200 224 250 280 300 315 355 400
80 46.34
100 46.57 47.04
125 52.73 53.26 53.81
150 60.44 61.05 61.66 62.29
160 67.43 68.10 68.79 69.49 70.19
180 68.86 69.56 70.26 70.97 71.69 72.41
200 68.65 69.35 70.04 70.75 71.47 72.19 72.92
224 79.15 79.94 80.76 81.58 82.40 83.23 84.08 84.92
250 85.29 86.14 87.01 87.89 88.77 89.67 90.59 91.49 92.42
280 100.83 101.83 102.86 103.90 104.95 106.01 107.09 108.17 109.27 110.36
300 105.18 106.24 107.33 108.41 109.50 110.60 111.72 112.85 113.98 115.15 116.30
315 114.11 115.26 116.43 117.60 118.79 119.99 121.21 122.42 123.67 124.91 126.17 127.45
355 116.74 118.53 120.32 122.16 124.02 125.90 127.82 129.76 131.75 133.75 135.79 137.86
400 132.24 134.26 136.31 138.37 140.49 142.63 144.80 146.99 149.24 151.52 153.82 156.16 158.54
Saddles 90/45˚ Order code example CS 250 150
(d1) (d3)
Boot tee/cross 90˚ Order code example TB 250 150
(d1) (d3)
ConicalCSd1
d3
SV Prices +50%
d3
d1
d1
d3
TB XB Prices +50% d1
d3
Sales and product information is available at www.ventilationcentre.co.ukSizes are nominal unless shown otherwise. Prices exclude delivery and VAT. Subject to our terms and conditions of sale. 10
CB90 CB60 CB45 CB30
Ømm
Bend90˚
Bend60˚
Bend45˚
Bend30˚
100 13.97 13.97 13.18 13.18
125 16.97 16.97 15.29 15.29
140 21.61 21.61 17.27 17.27
160 22.61 22.61 18.20 18.20
180 37.17 35.56 29.19 29.19
Clipduct system
Ømm
1.5mlength
Gaugemm
JointingClip
100 19.50 0.6 10.15
125 21.87 0.6 10.65
140 24.41 0.6 10.84
160 24.57 0.6 10.94
180 28.38 0.7 13.38
200 29.72 0.7 13.52
250 35.67 0.7 13.66
315 51.90 0.7 15.89
350 58.02 0.7 17.00
400 69.03 0.9 17.81
450 78.75 0.9 18.53
500 87.81 0.9 19.18
Longitudinal seamed ductTurned edges for clip connection
Pressed bendsr = 1 x Ø to centreline
CL CJC
Order code example CL 160 1500
(diameter) (length)
• Manufactured from galvanised mild steel
Other products also availableFloor plate, Sweep-up point and Pneumatic damper
11Sales and product information is available at www.ventilationcentre.co.ukSizes are nominal unless shown otherwise. Prices exclude delivery and VAT. Subject to our terms and conditions of sale.
Clipduct system
CSJ CTM CTF CEC CIL CSG CU CJ
Ømm
Slip joint with O-ring
Transition to male
Transitionto female
End cap Take-offSliding gate
damperUniversal
cowlJet cowl
100 13.93 10.37 10.37 10.50 7.59 32.99 35.60 143.21
125 14.63 12.05 12.05 11.52 9.47 41.54 39.10 150.05
140 16.59 12.63 12.63 11.73 9.65 42.62 40.63 163.57
160 16.75 12.67 12.67 11.85 9.75 45.96 41.69 170.08
180 18.00 15.98 15.98 12.45 11.67 53.70 54.35 174.97
200 18.19 16.14 16.14 12.57 11.78 54.42 54.90 180.01
250 19.68 16.79 16.79 12.70 12.18 64.73 64.51 204.08
315 22.27 18.38 18.38 12.83 13.76 95.59 87.91 255.57
350 23.67 20.47 20.47 13.48 15.64 99.05 107.38 260.03
400 23.67 23.00 23.00 14.65 19.00 133.76 110.48 303.32
450 29.64 25.91 25.91 15.05 19.85 180.21 113.92 355.83
500 31.32 27.82 27.82 15.57 21.35 116.50 415.95
FittingsFor longitudinal seamed duct
CBF90 CBF60 CBF45 CBF30
Ømm
Bend90˚
Bend60˚
Bend45˚
Bend30˚
200 41.74 35.92 29.48 29.48
250 54.47 42.04 34.19 29.78
315 73.35 66.54 47.57 37.29
350 90.61 82.45 58.01 44.64
400 122.85 91.64 74.85 59.44
450 150.55 109.80 91.49 71.10
500 178.20 110.89 102.46 81.30
Fabricated bendsr = 1.5 x Ø to centreline
Sales and product information is available at www.ventilationcentre.co.ukSizes are nominal unless shown otherwise. Prices exclude delivery and VAT. Subject to our terms and conditions of sale. 12
Ød1
mm
Ød2 mm
100 125 140 160 180 200 250 315 350 400 450
125 45.87
140 47.17 46.69
160 52.41 51.89 51.89 51.38
180 56.57 56.01 55.46 54.91
200 61.91 61.30 60.69 60.09 59.49
250 64.47 63.84 63.21 62.58 61.96 61.35
315 68.99 68.30 67.62 66.96 66.30 65.65 64.99
350 71.86 71.16 70.44 69.75 69.06 68.37 67.69 67.03
400 75.58 74.84 74.09 73.36 72.63 71.91 71.20 70.50 69.80
450 88.16 87.29 86.43 85.56 84.73 83.89 83.05 82.23 81.41 80.61
500 90.37 89.49 88.60 87.72 86.85 85.99 85.14 84.30 83.46 82.63 81.82
Ød1
mm
Ød2 mm
100 125 140 160 180 200 250 315 350 400 450
125 67.57
140 68.17 68.86
160 68.51 69.20 69.90
180 70.38 71.08 71.81 72.53
200 89.06 89.96 90.87 91.78 92.71
250 90.82 91.74 92.66 93.60 94.54 95.50
315 112.69 114.99 117.33 119.73 122.18 124.67 127.21
350 113.75 116.07 118.44 120.85 123.33 125.84 128.41 131.03
400 146.82 149.82 152.88 156.00 159.18 162.43 165.75 169.13 172.58
450 153.56 155.91 158.27 160.69 163.13 165.62 168.14 170.69 173.31 175.94
500 161.47 163.10 164.76 166.42 169.25 169.80 171.51 173.25 175.00 176.77 178.57
Reducer Order code example CRC 250 160
(d1) (d2)
Order code example CRT 250 160 100
(d1) (d2) (d3)
Clipduct system
Reducing tee 30˚
d1 d2CRC Concentric
CRTd1d2
d3
13Sales and product information is available at www.ventilationcentre.co.ukSizes are nominal unless shown otherwise. Prices exclude delivery and VAT. Subject to our terms and conditions of sale.
Ød1
mm
Ød3 mm
100 125 140 160 180 200 250 315 350 400 450 500
100 51.49
125 54.07 54.61
140 55.03 55.58 56.15
160 55.86 56.42 57.00 57.57
180 57.95 58.54 59.13 59.72 60.33
200 74.18 74.93 75.69 76.45 77.23 78.00
250 76.49 77.26 78.04 78.84 79.63 80.44 81.24
315 101.78 102.80 103.85 104.90 105.95 107.02 108.10 109.20
350 104.95 106.01 107.08 108.16 109.25 110.36 111.47 112.60 113.74
400 138.23 139.63 141.04 142.47 143.90 145.35 146.83 148.31 149.80 151.32
450 140.75 142.18 143.62 145.07 146.53 148.01 149.50 151.01 152.54 154.08 155.63
500 142.87 144.31 145.77 147.24 148.73 150.23 151.75 153.28 154.83 156.39 157.97 159.57
Ød1
mm
Ød3 mm
100 125 140 160 180 200 250 315 350 400 450 500
100 66.59
125 69.92 70.62
140 71.16 71.89 72.61
160 73.21 73.95 74.69 75.45
180 78.25 79.04 79.83 80.64 81.45
200 93.91 94.85 95.82 96.78 97.76 98.75
250 96.85 107.62 108.70 109.80 110.91 112.03 113.16
315 118.89 120.08 121.30 122.52 123.77 125.02 126.28 127.55
350 122.60 123.84 125.09 126.35 127.63 128.92 130.23 131.54 132.87
400 160.70 162.32 163.97 165.62 167.29 168.98 170.69 172.42 174.16 175.92
450 163.62 165.28 166.95 168.64 170.34 172.05 173.79 175.55 177.32 179.11 180.92
500 166.07 167.75 169.44 171.15 172.88 174.63 176.40 178.18 179.98 181.79 183.63 185.48
Tee 90˚ Order code example CT 250 160
(d1) (d3)
Y piece 30˚
Clipduct system
CTd1
d3
CY d1
d3
d3
Order code example CY 250 160
(d1) (d3)
Sales and product information is available at www.ventilationcentre.co.ukSizes are nominal unless shown otherwise. Prices exclude delivery and VAT. Subject to our terms and conditions of sale. 14
Clipduct system
Ød1
mm
Ød3 mm
100 125 140 160 180 200 250 315 350 400 450 500
100 45.66
125 45.66 47.94
140 45.66 47.94 48.80
160 45.66 47.94 48.80 54.95
180 45.66 47.94 48.80 54.95 58.72
200 45.66 47.94 48.80 54.95 58.72 62.77
250 45.66 47.94 48.80 54.95 58.72 62.77 64.73
315 45.66 47.94 48.80 54.95 58.72 62.77 64.73 82.32
350 45.66 47.94 48.80 54.95 58.72 62.77 64.73 82.32 84.90
400 45.66 47.94 48.80 54.95 58.72 62.77 64.73 82.32 84.90 85.75
450 45.66 47.94 48.80 54.95 58.72 62.77 64.73 82.32 84.90 85.75 141.95
500 45.66 47.94 48.80 54.95 58.72 62.77 64.73 82.32 84.90 85.75 141.95 143.36
Branch saddle 30˚ Order code example CBS 250 160
(d1) (d3)
Ød1
mm
d quantity d quantity
1-3 4-5 6-8 1-3 4-5 6-8
100-350 145.16 166.99 266.10 180.90 254.00 408.56
400-500 159.68 183.69 292.71 198.98 279.40 449.41
Multi-point adaptersSuction head/Sputnik
Order code example CMH 250 3
(d1) (d qty)
Please specify d sizes and positioning when ordering
CBSd1
d3
CMH
d1
d
CMS
d1
d
15Sales and product information is available at www.ventilationcentre.co.ukSizes are nominal unless shown otherwise. Prices exclude delivery and VAT. Subject to our terms and conditions of sale.
ProductSystem 4 Ø 100mm
System 5 Ø 125mm
System 6 Ø 150mm
Pipe
Outer sleeve pipe
1m length
Telescopic assembly
250-450mm
Pipe connector
Bend 90˚
Bend 45˚
Reducer
Back draughtshutter
Condensation trap with overflow
Wall plate
Domestic duct systems
4135 350mm L 4.21
4150 500mm L 6.14
41100 1m L 9.92
41200 2m L 14.38
5135 350mm L 5.34
5150 500mm L 7.69
51100 1m L 12.40
51200 2m L 17.97
6135 350mm L 6.39
6150 500mm L 9.23
61100 1m L 14.87
61200 2m L 21.56
4310 10.91 5310 13.64 6310 16.36
4130 15.82 5130 19.77 6130 23.72
493 2.48 593 3.11 693 3.74
490 7.47 590 9.50 690 11.76
491 6.44 591 7.74
4119 125mm/ 2.23
100mm
5118 150mm/ 2.49
125mm
499 7.02 599 8.33 699 11.66
497 16.06 597 22.41 697 28.37
4114 1.24 5114 2.18 6114 2.67
Continued overleaf
• Manufactured from flame retardant, self-extinguishing plastic in white• Suitable for temperatures up to +60˚C• Conforms to building regulations
Circular pipe systems
Sales and product information is available at www.ventilationcentre.co.ukSizes are nominal unless shown otherwise. Prices exclude delivery and VAT. Subject to our terms and conditions of sale. 16
ProductSystem 4 Ø 100mm
System 5 Ø 125mm
System 6 Ø 150mm
Threaded hoseconnector
PVC flexible duct
6m length
Gravity flapwall outlet
Cowled walloutlet with
damper
Fixed louvredgrille withfly screen
Egg crate grille
Circular louvre
Mushroomcowled wall
outlet
Air valve withcollar & ring
Domestic duct systems
4900 4.46 5900 6.20 6900 7.93
4902 5.71 5902 8.59 6902 10.30
4904 6.38 5904 7.57 6904 8.87
4906 4.84 5906 6.57 6906 8.31
4804 3.52
4110 8.70
4136 7.81 5136 8.25
6136 11.25
8136 Ø 200mm 16.58
4124 100mmcd 1.24
4126 100mmid 1.24
5124 125mmcd 1.86
5126 125mmid 1.86
6124 150mmcd 2.48
6126 150mmid 2.48
Circular pipe systems (continued)
466 26.49 566 27.65 666 35.26
Wall outlets and grilles are available in brown, grey, terracotta, Cotswold stone or white, and feature UV stabilising properties to reduce colour fade
17Sales and product information is available at www.ventilationcentre.co.ukSizes are nominal unless shown otherwise. Prices exclude delivery and VAT. Subject to our terms and conditions of sale.
Domestic duct systems
Product Description Code Each
Cooker hood
kit
Gravity flap wall outlet
Aluminium flex 1.5m L
Hose clip
Screws & plugs
Ø 100mm 4210 14.76
Ø 125mm 5210 18.47
Ø 150mm 6210 22.19
Tumble dryer
kit
Gravity flap wall outletAluminium flex Wall plate & hose clip PVC flex 1.5m LConnector with foam discTies (2), Screws & plugs
Ø 100mm 4212 16.12
Wall vent kits
Product Description Code Each
Throughroof vent kit
Weathering slate
Roof cowl
Soil pipe 500mm L
Ø 110mm457x457mm
angled1380 103.13
Ø 110mm406x406mm
flat1390 102.28
Five in oneroof vent kit
500x500mm lead terminal
in dark grey, to suit sizes
Ø 100, 110, 125, 150 & 160mm
1395 103.68
Roof vent kits
Sales and product information is available at www.ventilationcentre.co.ukSizes are nominal unless shown otherwise. Prices exclude delivery and VAT. Subject to our terms and conditions of sale. 18
ProductSystem 100
110mm x 54mmSystem 125
204mm x 60mm
Channel
Channelconnector
Channel connector
with damper
Elbow bend 90˚
Adapter
Rubber spigotadapter
Offset reducer
Horizontalbend 90˚
Adjustablehorizontal
bend
Vertical bend 90˚
Domestic duct systems
10-010 1m L 6.20
10-015 1.5m L 9.30
12-010 1m L 11.55
12-015 1.5m L 17.33
10-020 1.55 12-020 7.32
10-030 100mmid 3.89
10-040 100mmod 3.89
12-440 100mmid 9.89
12-540 125mmid 9.89
12-640 150mmid 9.89
12-544 Adapts 12-540 2.09 to 100mm
12-519 Connects to cooker 2.23 hood spigot 120mm to 125mm
12-644 Adapts 12-640 2.57 to 125mm/ 100mm
10-050 3.89 12-050 15.37
12-545 13.97
10-060 3.72 12-060 10.18
• Manufactured from flame retardant, self-extinguishing plastic in white• Suitable for temperatures up to +60˚C• Conforms to building regulations
Flat channel systems
10-027 2.13
19Sales and product information is available at www.ventilationcentre.co.ukSizes are nominal unless shown otherwise. Prices exclude delivery and VAT. Subject to our terms and conditions of sale.
ProductSystem 100
110mm x 54mmSystem 125
204mm x 60mm
Horizontal tee 90˚
Round to rectangular
adapter
Short round to rectangular
adapter
Wall plate
Channel chip
PVC flexibleduct
3m length
Gravity flap wall outlet
Cowled walloutlet with
damper
Fixed louvredgrille withfly screen
Egg crate grille
Domestic duct systems
10-070 100mmid 4.75 12-570 125mmid 11.21
10-071 100mmod 2.64
10-072 100mmid 2.64
10-115 1.24 12-115 2.28
10-122 1.24 12-122 3.47
10-333 10.29 12-533 17.58
10-901 5.20
10-903 5.83
10-905 6.38
10-907 5.58
Flat channel systems (continued)
10-080 6.20 12-080 16.60
Wall outlets and grilles are available in brown, grey, terracotta, Cotswold stone or white, and feature UV stabilising properties to reduce colour fade
Sales and product information is available at www.ventilationcentre.co.ukSizes are nominal unless shown otherwise. Prices exclude delivery and VAT. Subject to our terms and conditions of sale. 20
ProductSystem 225
234mm x 29mmSystem 300
308mm x 29mm
Channel
Channelconnector
Horizontal bend 90˚
Horizontal bend 45˚
Vertical bend 90˚
Vertical bend 45˚
Elbow bend/plenum with connector
Round torectangular
adapter (requires 493)
Support clip
Domestic duct systems
22-010 1m L 21.36
22-015 1.5m L 32.04
22-020 2m L 42.72
22-024 2.4m L 51.26
30-010 1m L 27.07
30-015 1.5m L 40.61
30-020 2m L 54.13
30-024 2.4m L 46.51
22-006 4.27 30-006 5.13
22-007 14.14 30-007 19.73
22-008 12.27 30-008 16.45
22-009 11.39 30-009 13.26
22-011 7.66 30-011 8.62
22-012 100mmid 21.14
22-013 120mmid 16.92
30-012 100mmid 22.87
30-013 120mmid 18.30
22-005 100mmid 8.92 30-005 100mmid 10.67
014 0.50
• Manufactured from flame retardant, self-extinguishing plastic in white• Suitable for temperatures up to +60˚C• Conforms to building regulations
Flat channel systems (continued)
21Sales and product information is available at www.ventilationcentre.co.ukSizes are nominal unless shown otherwise. Prices exclude delivery and VAT. Subject to our terms and conditions of sale.
Product Description Code Each
Horizontal louvred airbrick
204mm x 60mm 505 4.95
Horizontallouvred airbrick
with damper204mm x 60mm 501 5.71
Verticallouvred airbrick
204mm x 60mm 507 6.20
System 100airbrick adapter
Fits airbrick to system 100 077 2.64
System 225/300airbrick adapters
Fits airbrick to system 225 22-016 12.55
Fits airbrick to system 300 30-016 13.49
Internal doorventilator
417mm x 77mm 145 8.68
Fixed ventilator
229mm x 76mm 790 1.66
229mm x 152mm 791 2.37
229mm x 229mm 792 3.53
Adjustableventilator
229mm x 76mm 890 2.39
229mm x 152mm 891 3.87
229mm x 229mm 892 5.68
Circular soffit vent
Ø 70mm 186 1.14
Airbricks & ventilators
Domestic duct systems
Sales and product information is available at www.ventilationcentre.co.ukSizes are nominal unless shown otherwise. Prices exclude delivery and VAT. Subject to our terms and conditions of sale. 22
Elta fans
Code EachElectronic controller Clamp Flexible connection Damper Panel filter
Code Each Code Each Code Each Code Each Code Each
SJ100ASJ100B
53.0053.00
149-EL21
149-EL21
29.0029.00
018-100-CLAMP
018-100-CLAMP
5.005.00
018-0100-FLEX
018-0100-FLEX
18.0018.00
018-100-DAMPER
018-100-DAMPER
13.0013.00
018-0100-FILT-P
018-0100-FILT-P
38.0038.00
SJ125ASJ125B
54.0054.00
149-EL21
149-EL21
29.0029.00
018-125-CLAMP
018-125-CLAMP
5.005.00
018-0125-FLEX
018-0125-FLEX
18.0018.00
018-125-DAMPER
018-125-DAMPER
15.0015.00
018-0125-FILT-P
018-0125-FILT-P
40.0040.00
SJ150 56.00 149-EL21 29.00 018-150-CLAMP 6.00 018-0150-FLEX 18.00 018-150-DAMPER 16.00 018-0150-FILT-P 42.00
SJ160 59.00 149-EL21 29.00 018-160-CLAMP 6.00 018-160-DAMPER 16.00 018-0160-FILT-P 42.00
SJ200ASJ200B
86.0086.00
149-EL21
149-EL21
29.0029.00
018-200-CLAMP
018-200-CLAMP
6.006.00
018-0200-FLEX
018-0200-FLEX
21.0021.00
018-200-DAMPER
018-200-DAMPER
20.0020.00
018-0200-FILT-P
018-0200-FILT-P
48.0048.00
SJ250A 100.00 149-EL21 29.00 018-250-CLAMP 8.00 018-0250-FLEX 26.00 018-250-DAMPER 21.00 018-0250-FILT-P 54.00
SJ315SJ315B
135.00147.00
149-EL21
149-EL21
29.0029.00
018-315-CLAMP
018-315-CLAMP
9.009.00
018-0315-FLEX
018-0315-FLEX
26.0026.00
018-315-DAMPER
018-315-DAMPER
32.0032.00
018-0315-FILT-P
018-0315-FILT-P
66.0066.00
SJ355ASJ355B
322.00486.00
149-EL21
149-EL41
29.0064.00
018-355-CLAMP
018-355-CLAMP
10.0010.00
018-0355-FLEX
018-0355-FLEX
28.0028.00
018-355-DAMPER
018-355-DAMPER
36.0036.00
018-0355-FILT-P
018-0355-FILT-P
76.0076.00
CodeElectric heater battery Silencer 300mm long Silencer 600mm long Silencer 900mm long Silencer 1200mm long
Code Each Code Each Code Each Code Each Code Each
SJ100ASJ100B
018-0100-HEAT-1
018-0100-HEAT-1
161.00161.00
068-0100-JF1
068-0100-JF1
26.0026.00
068-0100-JF2
068-0100-JF2
29.0029.00
068-0100-JF3
068-0100-JF3
45.0045.00
068-0100-JF4
068-0100-JF4
57.0057.00
SJ125ASJ125B
018-0125-HEAT-1
018-0125-HEAT-1
144.00144.00
068-0125-JF1
068-0125-JF1
27.0027.00
068-0125-JF2
068-0125-JF2
33.0033.00
068-0125-JF3
068-0125-JF3
48.0048.00
068-0125-JF4
068-0125-JF4
66.0066.00
SJ150 018-0150-HEAT-1 150.00 068-0150-JF1 29.00 068-0150-JF2 39.00 068-0150-JF3 51.00 068-0150-JF4 69.00
SJ160 018-0160-HEAT-1 150.00 068-0160-JF1 44.00 068-0160-JF2 47.00 068-0160-JF3 66.00 068-0160-JF4 77.00
SJ200ASJ200B
018-0200-HEAT-1
018-0200-HEAT-1
165.00165.00
068-0200-JF1
068-0200-JF1
44.0044.00
068-0200-JF2
068-0200-JF2
47.0047.00
068-0200-JF3
068-0200-JF3
66.0066.00
068-0200-JF4
068-0200-JF4
77.0077.00
SJ250A 018-0250-HEAT-1 185.00 068-0250-JF1 48.00 068-0250-JF2 56.00 068-0250-JF3 79.00 068-0250-JF4 96.00
SJ315SJ315B
018-0315-HEA1/3
018-0315-HEA1/3
260.00260.00
068-0315-JF1
068-0315-JF1
66.0066.00
068-0315-JF2
068-0315-JF2
78.0078.00
068-0315-JF3
068-0315-JF3
105.00105.00
068-0315-JF4
068-0315-JF4
125.00125.00
SJ355ASJ355B
018-0355-HEAT-1
018-0355-HEAT-1
274.00274.00
068-0355-JF1
068-0355-JF1
78.0078.00
068-0355-JF2
068-0355-JF2
103.00103.00
068-0355-JF3
068-0355-JF3
127.00127.00
068-0355-JF4
068-0355-JF4
153.00153.00
Jetflow SJ - in-line centrifugal fanSingle phase - fixed or variable speed 220v-240v / 50hz
Product specifications are available on request
23Sales and product information is available at www.ventilationcentre.co.ukSizes are nominal unless shown otherwise. Prices exclude delivery and VAT. Subject to our terms and conditions of sale.
Elta fans
Code EachElectronic controller Transformer controller Louvre shutter Impeller side guard Wall cowl
Code Each Code Each Code Each Code Each Code Each
SCP250/4-1 116.00 149-EL31TK 54.00 149-TC12 110.00 064-0250-C 16.00 078C-0250-C 8.00 SWC25/31 46.00
SCP315/4-1 138.00 149-EL31TK 54.00 149-TC12 110.00 064-0315-C 19.00 078C-0315-C 8.00 SWC25/31 46.00
SCP350/4-1 154.00 149-EL31TK 54.00 149-TC12 110.00 064-0350-C 20.00 078C-0350-C 8.00 SWC35/40 68.00
SCP400/4-1 181.00 149-EL31TK 54.00 149-TC14 146.00 064-0400-C 22.00 078C-0400-C 8.00 SWC35/40 68.00
SCP450/6-1 203.00 149-EL31TK 54.00 149-TC12 110.00 064-0450-C 29.00 078C-0450-C 10.00 SWC45/50 99.00
SCP450/4-1 203.00 149-EL31TK 54.00 149-TC14 146.00 064-0450-C 29.00 078C-0450-C 10.00 SWC45/50 99.00
SCP500/6-1 235.00 149-EL31TK 54.00 149-TC14 146.00 064-0500-C 33.00 078C-0500-C 10.00 SWC45/50 99.00
SCP500/4-1 235.00 149-EL61TK 80.00 149-TC18 169.00 064-0500-C 33.00 078C-0500-C 10.00 SWC45/50 99.00
SCP560/6-1 277.00 149-EL31TK 54.00 149-TC14 146.00 064-0560-C 53.00 078C-0560-C 14.00 SWC56/63 138.00
SCP560/4-1 341.00 149-EL61TK 80.00 149-TC18 169.00 064-0560-C 53.00 078C-0560-C 14.00 SWC56/63 138.00
SCP630/6-1 323.00 149-EL101 115.00 149-TC18 169.00 064-0630-C 60.00 078C-0630-C 14.00 SWC56/63 138.00
SCP630/4-1 433.00 149-EL101 115.00 149-TC110 181.00 064-0630-C 60.00 078C-0630-C 14.00 SWC56/63 138.00
Compact SCP - plate mounted axial fanSingle phase - fixed or variable speed 220v-240v / 50hz
Product specifications are available on request
Code EachElectronic controller Transformer controller Ancillary pack Mounting feet Matching flange
Code Each Code Each Code Each Code Each Code Each
SCD250/4-1 148.00 149-EL31TK 54.00 149-TC12 110.00 APK250SCD/S1B 69.00 060A-0250-C 14.00 061A-0250-C 10.00
SCD315/4-1 179.00 149-EL31TK 54.00 149-TC12 110.00 APK315SCD/S1B 75.00 060A-0315-C 13.00 061A-0315-C 10.00
SCD350/4-1 185.00 149-EL31TK 54.00 149-TC12 110.00 APK350SCD/S1B 78.00 060A-0350-C 13.00 061A-0350-C 17.00
SCD400/4-1 215.00 149-EL31TK 54.00 149-TC14 146.00 APK400SCD/S1B 84.00 060A-0400-C 13.00 061A-0400-C 19.00
SCD450/6-1 256.00 149-EL31TK 54.00 149-TC12 110.00 APK450SCD/S1B 91.00 060A-0450-C 13.00 061A-0450-C 21.00
SCD450/4-1 256.00 149-EL31TK 54.00 149-TC14 146.00 APK450SCD/S1B 91.00 060A-0450-C 13.00 061A-0450-C 21.00
SCD500/6-1 269.00 149-EL31TK 54.00 149-TC14 146.00 APK500SCD/S1G 101.00 060A-0500-C 15.00 061A-0500-C 24.00
SCD500/4-1 281.00 149-EL61TK 80.00 149-TC18 169.00 APK500SCD/S1G 101.00 060A-0500-C 15.00 061A-0500-C 24.00
SCD560/6-1 308.00 149-EL31TK 54 .00 149-TC14 146.00 APK560SCD/S1G 111.00 060A-0560-C 17.00 061A-0560-C 25.00
SCD560/4-1 348.00 149-EL61TK 80.00 149-TC18 169.00 APK560SCD/S1G 111.00 060A-0560-C 17.00 061A-0560-C 25.00
SCD630/6-1 418.00 149-EL101 115.00 149-TC18 169.00 APK630SCD/S1G 120.00 060A-0630-C 18.00 061A-0630-C 28.00
SCD630/4-1 509.00 149-EL101 115.00 149-TC110 181.00 APK630SCD/S1G 120.00 060A-0630-C 18.00 061A-0630-C 28.00
Compact SCD - duct mounted axial fanSingle phase - fixed or variable speed 220v-240v / 50hz
Product specifications are available on request
Sales and product information is available at www.ventilationcentre.co.ukSizes are nominal unless shown otherwise. Prices exclude delivery and VAT. Subject to our terms and conditions of sale. 24
CodeFlexible connection AV mounts (set of 4) Silencer 1D podded Silencer 1D unpodded
Code Each Code Each Code Each Code Each
SCD250/4-1 063-0250-MAN150 7.00 062-S1B 13.00 068-0250-1DEP 112.00 068-0250-1DENP 75.00
SCD315/4-1 063-0315-MAN150 7.00 062-S1B 13.00 068-0315-1DEPC 117.00 068-0315-1DENPC 79.00
SCD350/4-1 063-0350-MAN150 7.00 062-S1B 13.00 068-0350-1DEPC 132.00 068-0350-1DENPC 90.00
SCD400/4-1 063-0400-MAN150 8.00 062-S1B 13.00 068-0400-1DEPC 147.00 068-0400-1DENPC 100.00
SCD450/6-1 063-0450-MAN150 8.00 062-S1B 13.00 068-0450-1DEPC 170.00 068-0450-1DENPC 115.00
SCD450/4-1 063-0450-MAN150 8.00 062-S1B 13.00 068-0450-1DEPC 170.00 068-0450-1DENPC 115.00
SCD500/6-1 063-0500-MAN150 9.00 062-S1G 13.00 068-0500-1DEPC 193.00 068-0500-1DENPC 129.00
SCD500/4-1 063-0500-MAN150 9.00 062-S1G 13.00 068-0500-1DEPC 193.00 068-0500-1DENPC 129.00
SCD560/6-1 063-0560-MAN150 9.00 062-S1G 13.00 068-0560-1DEPC 219.00 068-0560-1DENPC 151.00
SCD560/4-1 063-0560-MAN150 9.00 062-S1G 13.00 068-0560-1DEPC 219.00 068-0560-1DENPC 151.00
SCD630/6-1 063-0630-MAN200 10.00 062-S1G 13.00 068-0630-1DEPC 245.00 068-0630-1DENPC 170.00
SCD630/4-1 063-0630-MAN200 10.00 062-S1G 13.00 068-0630-1DEPC 245.00 068-0630-1DENPC 170.00
CodeSilencer 2D podded Silencer 2D unpodded Impeller side guard Wall cowl
Code Each Code Each Code Each Code Each
SCD250/4-1 068-0250-2DEP 135.00 068-0250-2DENP 89.00 078C-0250-C 8.00 SWC25/31 46.00
SCD315/4-1 068-0315-2DEPC 138.00 068-0315-2DENPC 97.00 078C-0315-C 8.00 SWC25/31 46.00
SCD350/4-1 068-0350-2DEPC 163.00 068-0350-2DENPC 108.00 078C-0350-C 8.00 SWC35/40 68.00
SCD400/4-1 068-0400-2DEPC 202.00 068-0400-2DENPC 135.00 078C-0400-C 8.00 SWC35/40 68.00
SCD450/6-1 068-0450-2DEPC 214.00 068-0450-2DENPC 138.00 078C-0450-C 10.00 SWC45/50 99.00
SCD450/4-1 068-0450-2DEPC 214.00 068-0450-2DENPC 138.00 078C-0450-C 10.00 SWC45/50 99.00
SCD500/6-1 068-0500-2DEPC 257.00 068-0500-2DENPC 180.00 078C-0500-C 10.00 SWC45/50 99.00
SCD500/4-1 068-0500-2DEPC 257.00 068-0500-2DENPC 180.00 078C-0500-C 10.00 SWC45/50 99.00
SCD560/6-1 068-0560-2DEPC 324.00 068-0560-2DENPC 234.00 078C-0560-C 14.00 SWC56/63 138.00
SCD560/4-1 068-0560-2DEPC 324.00 068-0560-2DENPC 234.00 078C-0560-C 14.00 SWC56/63 138.00
SCD630/6-1 068-0630-2DEPC 368.00 068-0630-2DENPC 275.00 078C-0630-C 14.00 SWC56/63 138.00
SCD630/4-1 068-0630-2DEPC 368.00 068-0630-2DENPC 275.00 078C-0630-C 14.00 SWC56/63 138.00
Compact SCD - duct mounted axial fan (continued)Single phase - fixed or variable speed 220v-240v / 50hz
Elta fans
Product specifications are available on request
Elta Selectproduct range
Axial flow Mixed flow Centrifugal Roof mounted Other products
Com
pactS
CP
Com
pactS
CPA
Com
pactS
CD
C
ompact
SC
DA
Miniflow
SA
MF
Com
pact power
plus SC
PP
Revolution
SLC
Biflow
SB
(CY
L)B
iflowS
B (C
ON
)S
mokevent
SLC
S
Multiflow
SM
BM
ultiflowS
MC
Multiflow
SM
T
JetflowS
JH
ideaway
SH
JetstreamS
JSH
ideaway
SH
MQ
uietflowS
QS
Quietflow
SQ
TP
owerduct
SP
DS
ingleflowS
SD
D &
SS
BD
Twinflow
STD
D &
STB
D
Skyflow
SS
FS
kyflowS
SM
FM
iniflowS
MF
Singleflow
SS
DR
& S
SB
RTw
inflowS
TDR
& S
TBR
Heritage
SG
EH
eritageS
CH
Heritage
SC
HT
Skyflow
SS
FV
Window
/wall fan
SA
XIndustrial w
all fanS
PE
In wall S
EIE
Thru wall S
EW
EP
ortacoolerS
PC
Pedestal/W
all fanH
PF/H
WF
Ceiling fan
HC
FVoltagecontrollers
Invertercontrollers
AC
Ocontrollers
Electrical
accessories
Ask for a copy of the 4th edition price list
Sales and product information is available at www.ventilationcentre.co.ukSizes are nominal unless shown otherwise. Prices exclude delivery and VAT. Subject to our terms and conditions of sale. 26
Aluminium grilles & diffusers
Heightmm
Width mm
100 150 200 250 300 350 400 450 500 550 600 650 700 750 800 850 900
100 8.12 8.12 9.26 9.55 9.99 11.73 12.73 14.17 15.77 16.48 17.07 19.82 20.97 22.13 23.28 24.43 25.44
150 9.55 10.42 11.73 12.88 13.89 14.33 17.93 18.23 19.09 20.97 22.25 23.00 23.71 25.31 26.75 28.49
200 11.73 13.02 14.46 16.05 17.51 18.66 20.24 21.97 24.86 25.44 26.59 27.34 29.12 30.79 32.08
250 14.46 16.34 17.63 19.95 20.82 23.43 24.73 27.62 28.49 29.93 30.92 31.80 33.11 35.71
300 18.38 19.95 21.69 24.15 25.44 26.46 30.92 32.08 33.24 34.40 36.13 37.73 39.45
350 22.13 23.28 25.31 27.62 29.64 33.11 34.55 36.42 38.31 39.31 41.48 43.51
400 26.31 28.33 30.35 32.67 35.71 37.44 39.31 42.06 44.09 46.24 47.98
450 30.50 32.67 34.40 38.01 40.75 43.35 46.24 48.30 50.15 52.32
500 34.98 36.57 40.91 43.22 46.11 49.11 50.73 52.90 54.33
550 39.60 43.64 46.11 49.13 52.32 53.18 54.49 55.48
600 46.24 49.00 51.89 55.35 56.23 57.09 57.52
650 52.03 54.77 58.67 59.25 60.55 61.56
700 59.25 61.43 63.73 65.33 67.04
750 65.87 67.20 69.52 71.83
800 71.83 74.57 76.58
850 78.47 81.50
900 85.25
Heightmm
Width mm
100 150 200 250 300 350 400 450 500 550 600 650 700 750 800 850 900
100 13.74 13.74 14.90 16.64 18.38 20.39 22.56 24.73 26.75 29.34 32.08 34.26 36.57 38.31 40.04 41.78 41.91
150 15.03 16.34 18.66 20.39 23.12 25.44 28.33 30.79 33.24 37.01 38.31 41.26 41.63 43.79 46.24 48.13
200 18.94 20.82 23.00 25.44 28.77 31.65 34.12 36.70 41.34 43.51 45.54 47.69 50.00 52.46 54.49
250 23.28 25.44 28.33 32.08 35.71 38.31 41.48 45.96 48.13 50.43 52.46 54.92 57.52 61.43
300 28.33 31.52 34.98 39.03 41.91 44.94 50.15 52.90 55.35 57.52 60.69 63.44 67.78
350 34.55 37.57 41.91 45.09 48.56 54.33 57.23 60.55 63.29 66.91 69.93 74.57
400 40.80 45.54 48.13 52.46 58.54 61.85 66.04 70.24 74.57 78.04 81.50
450 48.26 52.17 55.48 62.87 67.20 71.54 76.30 80.04 83.94 87.72
500 65.18 69.08 75.57 82.51 87.44 92.76 96.95 101.29 105.06
550 73.70 80.78 86.27 92.19 97.55 101.01 104.61 109.25
600 85.25 90.46 95.94 102.59 105.77 109.25 113.57
650 95.52 101.14 107.66 111.26 115.46 120.36
700 107.36 113.14 118.06 122.67 128.59
750 119.64 124.69 130.47 135.96
800 132.36 138.86 143.13
850 144.77 150.13
900 156.05
Egg crate grilleGrille only
Order code example EC01 250 200
(width) (height)
EC01
Grille with opposed blade damper
EC11
• Manufactured from extruded aluminium with a satin anodised finish• For size including flange, add 45mm to width and height
Options• Removable or hinged cores• Core only• Paint finish to BS or RAL
Prices on request
27Sales and product information is available at www.ventilationcentre.co.ukSizes are nominal unless shown otherwise. Prices exclude delivery and VAT. Subject to our terms and conditions of sale.
Heightmm
Width mm
100 150 200 250 300 350 400 450 500 550 600 650 700 750 800 850 900
100 7.80 7.80 8.26 8.68 9.55 10.86 12.01 12.73 14.61 16.05 16.78 18.08 18.66 19.09 19.95 20.39 20.97
150 8.12 8.68 9.99 10.70 11.57 12.44 13.02 16.93 18.08 18.79 20.97 21.83 22.56 23.71 24.86 26.31
200 10.42 10.86 11.57 12.44 13.89 14.90 19.37 22.25 23.28 25.15 26.17 27.62 28.91 29.48 29.93
250 11.73 12.88 14.17 16.05 16.64 20.52 24.29 27.62 29.48 30.50 31.37 31.80 35.55 37.29
300 14.61 16.05 16.93 18.08 24.15 27.46 31.09 29.93 34.98 36.13 37.73 39.89 41.63
350 17.07 18.08 19.95 26.31 30.79 33.39 36.60 37.73 39.31 41.78 44.23 46.83
400 21.69 23.43 30.35 33.11 36.13 39.45 41.20 41.91 45.24 48.13 51.60
450 27.46 32.67 36.29 42.06 44.23 45.09 46.11 49.71 53.34 56.23
500 34.98 39.89 43.64 47.69 48.56 49.87 53.76 57.52 61.72
550 43.51 46.11 49.87 51.60 53.34 57.52 61.13 65.76
600 47.12 52.03 54.77 57.66 62.13 65.90 70.95
650 55.20 59.25 62.13 66.91 71.38 76.30
700 64.15 66.91 71.09 75.00 80.64
750 71.38 72.83 78.17 83.10
800 78.04 81.79 85.40
850 83.96 88.00
900 90.90
Heightmm
Width mm
100 150 200 250 300 350 400 450 500 550 600 650 700 750 800 850 900
100 12.73 12.73 14.46 16.20 17.93 20.39 22.70 24.73 27.34 29.34 31.52 35.13 36.57 38.31 39.45 40.62 41.63
150 13.74 14.61 16.93 19.22 21.69 23.28 25.88 28.33 30.79 32.95 36.57 39.75 43.51 43.51 45.82 48.13
200 17.79 19.15 22.25 22.70 24.86 28.49 33.82 38.01 41.26 45.54 47.69 50.86 52.17 53.62 56.35
250 20.52 22.84 25.31 28.20 32.08 38.73 42.94 47.12 51.15 54.33 57.09 59.53 62.43 65.31
300 25.44 27.62 30.92 34.69 42.94 47.12 50.43 57.09 58.09 63.44 65.46 68.66 72.54
350 28.49 34.12 37.57 44.52 50.86 55.48 60.69 64.89 67.49 71.68 75.00 80.78
400 37.87 43.07 48.56 55.64 59.98 66.04 70.24 74.26 78.47 83.24 88.14
450 47.12 54.49 60.13 67.49 73.84 76.30 79.19 84.68 85.25 95.52
500 68.78 76.16 81.21 90.32 93.78 97.97 104.47 111.12 118.06
550 81.35 85.12 93.21 98.25 103.16 110.24 115.88 124.41
600 88.29 97.68 103.03 108.81 116.16 123.10 132.49
650 104.18 109.53 116.03 123.55 131.07 140.85
700 117.61 123.10 131.20 138.57 148.25
750 130.61 137.70 145.22 153.45
800 144.20 152.73 159.36
850 157.07 163.85
900 168.37
Single deflection grilleGrille only
Order code example SD01 250 200
(width) (height)
SD01
Grille with opposed blade damper
SD11
• Manufactured from extruded aluminium with a satin anodised finish• Single row of individually adjustable horizontal blades• For size including flange, add 45mm to width and height
Options• Paint finish to BS or RAL
Prices on request
Aluminium grilles & diffusers
Sales and product information is available at www.ventilationcentre.co.ukSizes are nominal unless shown otherwise. Prices exclude delivery and VAT. Subject to our terms and conditions of sale. 28
Heightmm
Width mm
100 150 200 250 300 350 400 450 500 550 600 650 700 750 800 850 900
100 8.68 8.68 10.27 11.00 12.44 13.89 14.75 16.05 20.24 21.26 24.15 26.31 28.77 30.50 32.67 34.83 36.57
150 10.13 11.00 13.74 14.61 16.05 17.21 18.94 23.12 23.86 26.59 28.49 30.50 33.11 34.83 37.44 39.89
200 12.31 14.33 16.64 18.08 19.95 22.13 28.04 28.49 31.09 32.83 34.26 35.85 39.75 42.78 45.54
250 16.05 18.79 20.39 22.25 22.42 31.09 32.67 36.13 37.57 39.89 43.22 45.09 47.55 50.30
300 20.24 23.12 25.60 26.90 35.26 36.29 41.20 42.78 45.54 48.13 50.74 53.18 56.64
350 25.15 26.90 28.91 37.57 40.91 45.96 48.13 50.86 53.90 56.23 59.98 62.57
400 30.79 31.52 40.47 44.81 51.60 53.04 56.23 58.67 60.55 64.03 66.91
450 35.43 43.35 48.13 55.20 58.23 60.55 63.16 66.04 69.52 72.24
500 47.69 51.73 59.11 64.60 69.93 74.85 80.49 84.83 88.72
550 55.48 65.46 71.96 78.47 84.24 90.16 96.82 104.04
600 71.83 77.89 83.10 90.32 97.38 104.91 111.54
650 80.04 91.03 97.83 105.47 113.86 121.08
700 96.67 103.03 108.81 117.04 123.55
750 109.25 115.46 121.08 127.44
800 121.08 127.01 132.50
850 134.08 140.89
900 147.66
Heightmm
Width mm
100 150 200 250 300 350 400 450 500 550 600 650 700 750 800 850 900
100 14.33 14.33 16.64 18.38 20.68 21.26 26.59 27.18 33.24 35.16 36.57 41.91 45.54 48.13 51.02 53.90 56.23
150 16.20 18.08 21.11 23.43 26.31 29.20 32.23 37.73 39.89 42.78 47.05 49.91 53.04 55.80 59.82 63.73
200 20.52 23.27 26.31 30.14 32.53 34.73 43.07 45.24 50.15 53.76 56.92 60.55 64.03 67.34 71.83
250 25.44 30.14 29.78 36.70 39.35 48.71 51.31 56.64 59.98 63.59 67.49 71.68 75.72 80.21
300 31.65 35.85 39.75 43.35 54.04 56.64 62.87 66.34 70.24 74.57 78.60 83.10 88.14
350 39.75 42.49 47.55 56.64 61.85 69.52 73.42 78.17 82.51 86.56 91.61 96.95
400 47.12 51.31 61.26 67.92 76.87 80.78 85.98 90.16 94.77 99.56 104.18
450 55.48 64.89 71.54 82.51 86.99 95.23 96.52 101.14 106.78 111.83
500 66.76 84.24 97.83 107.79 115.30 122.82 130.91 138.86 145.22
550 93.21 107.21 116.03 130.33 134.37 143.91 152.28 159.96
600 114.87 122.53 132.05 141.88 151.56 159.22 173.67
650 131.63 141.88 153.02 163.56 174.12 186.10
700 149.85 159.68 169.47 178.58 191.00
750 168.91 178.15 188.74 198.23
800 188.12 197.80 206.60
850 206.76 216.72
900 225.97
Double deflection grilleGrille only
Order code example DD01 250 200
(width) (height)
DD01
Grille with opposed blade damper
DD11
• Manufactured from extruded aluminium with a satin anodised finish• Two rows of individually adjustable blades; front are horizontal and rear are vertical• For size including flange, add 45mm to width and height
Options• Blade configuration• Paint finish to BS or RAL
Prices on request
Aluminium grilles & diffusers
29Sales and product information is available at www.ventilationcentre.co.ukSizes are nominal unless shown otherwise. Prices exclude delivery and VAT. Subject to our terms and conditions of sale.
Heightmm
Width mm
100 150 200 250 300 350 400 450 500 550 600 650 700 750 800 850 900
100 10.70 10.70 11.00 11.86 12.44 14.75 15.91 16.93 19.95 20.52 21.83 23.00 24.00 24.86 25.44 26.46 26.75
150 11.29 12.44 13.17 14.61 15.91 16.93 18.51 23.28 25.01 26.17 26.90 27.46 27.90 29.68 31.52 32.67
200 14.17 15.03 16.05 17.07 18.94 20.24 26.90 28.91 30.64 32.23 32.95 34.12 36.57 37.44 39.17
250 17.07 17.51 18.79 21.26 22.13 27.90 31.52 35.71 37.44 40.82 40.91 42.94 44.23 46.83
300 19.66 21.11 23.12 25.73 32.08 36.29 40.91 42.64 44.23 45.09 47.98 50.74 52.90
350 23.28 25.01 26.46 35.55 39.17 43.35 45.54 47.40 48.71 52.46 53.62 57.23
400 29.64 32.67 38.73 43.64 47.83 49.13 51.60 53.04 57.38 60.55 63.87
450 38.31 42.94 48.26 55.64 55.94 57.23 57.80 61.85 66.18 70.24
500 46.24 53.18 57.52 59.39 60.55 62.57 66.91 72.68 77.73
550 57.80 60.55 62.57 64.89 66.04 71.96 77.32 82.23
600 62.29 65.18 67.92 72.38 77.89 82.65 88.87
650 71.54 74.57 78.04 83.96 88.72 94.79
700 80.64 83.81 89.02 94.66 100.85
750 88.72 93.50 98.41 104.04
800 97.55 102.87 107.36
850 105.77 109.68
900 113.86
Heightmm
Width mm
100 150 200 250 300 350 400 450 500 550 600 650 700 750 800 850 900
100 14.61 14.61 16.78 18.08 21.40 23.86 27.03 30.50 33.11 36.59 39.31 41.48 42.94 44.94 46.98 48.13 49.87
150 16.78 18.38 20.82 23.12 26.75 28.62 30.92 35.13 39.89 41.20 44.66 47.40 49.43 52.32 55.20 57.38
200 21.40 23.12 25.60 27.62 30.64 37.29 39.03 44.52 49.43 52.75 56.07 60.13 62.29 65.31 66.76
250 26.90 29.64 32.83 36.57 40.75 48.13 52.46 58.09 62.13 65.60 68.34 72.24 74.85 77.73
300 33.39 36.42 39.45 43.35 51.45 58.54 61.43 67.78 70.38 74.85 78.47 82.37 88.14
350 40.47 43.93 48.56 57.52 64.45 70.38 73.12 78.17 81.07 85.98 91.33 96.39
400 49.57 55.79 64.03 70.09 75.95 80.21 84.38 88.72 95.52 101.01 105.47
450 62.13 68.49 75.57 81.21 88.72 92.19 96.39 102.59 109.10 115.17
500 86.99 95.23 99.70 106.05 108.93 113.27 118.20 123.83 127.01
550 102.16 104.32 108.81 114.30 118.48 123.97 127.72 130.91
600 106.34 116.33 118.34 123.26 125.99 131.20 133.80
650 122.39 129.46 137.42 144.19 148.68 152.73
700 138.28 145.36 151.00 163.26 172.22
750 154.75 165.00 174.68 183.78
800 169.19 182.05 190.72
850 185.37 199.25
900 203.38
Fixed blade grilleGrille only
Order code example FB01 250 200
(width) (height)
FB01
Grille with opposed blade damper
• Manufactured from extruded aluminium with a satin anodised finish• Single row of 45˚ fixed horizontal blades• For size including flange, add 45mm to width and height
Options• Blade angle• Paint finish to BS or RAL
Prices on request
FB11
Aluminium grilles & diffusers
Sales and product information is available at www.ventilationcentre.co.ukSizes are nominal unless shown otherwise. Prices exclude delivery and VAT. Subject to our terms and conditions of sale. 30
Heightmm
Width mm
100 150 200 250 300 350 400 450 500 550 600 650 700 750 800 850 900
100 8.55 8.55 9.42 9.99 10.86 11.86 14.04 14.90 17.51 18.51 19.37 20.82 21.26 22.56 23.28 23.71 24.15
150 9.55 9.83 11.29 12.01 12.73 14.75 16.20 20.52 22.70 23.28 23.86 24.73 25.01 26.46 27.18 28.62
200 11.73 12.31 12.88 13.89 16.05 17.93 23.83 25.15 26.59 28.20 28.77 30.50 31.52 33.11 34.83
250 14.17 14.46 16.48 18.23 19.22 24.86 27.62 31.37 32.83 34.55 35.55 37.44 38.88 40.91
300 16.64 18.38 19.66 20.97 27.34 31.52 34.55 37.15 38.01 39.31 40.75 43.64 45.37
350 19.66 21.97 22.70 30.35 34.69 37.29 39.03 40.75 42.78 45.54 48.13 50.58
400 24.29 27.34 33.82 37.15 40.75 41.91 44.81 46.68 49.00 52.17 55.79
450 30.92 36.86 41.20 46.98 48.13 49.13 50.15 53.76 57.66 61.13
500 41.48 46.52 47.55 52.75 54.04 55.94 59.69 64.45 68.49
550 50.74 52.46 55.35 57.52 59.53 64.03 68.34 73.12
600 54.21 57.52 60.69 64.03 68.21 72.68 78.76
650 61.85 65.46 68.66 73.98 78.47 83.81
700 70.52 73.84 78.17 82.93 88.87
750 78.47 80.92 85.83 91.77
800 85.53 90.16 94.66
850 93.21 97.38
900 101.01
Heightmm
Width mm
100 150 200 250 300 350 400 450 500 550 600 650 700 750 800 850 900
100 12.44 12.44 12.73 16.34 17.51 19.95 22.56 26.17 28.49 31.23 33.39 35.26 35.71 37.87 39.31 40.47 41.34
150 12.59 14.33 16.78 19.09 22.70 25.31 27.62 34.83 36.86 38.73 39.17 40.04 41.91 43.51 45.82 48.13
200 17.21 18.23 21.13 23.28 25.88 30.35 37.15 38.60 39.31 45.54 47.40 50.43 52.17 50.86 56.07
250 21.69 24.29 27.46 31.65 33.53 40.62 44.23 49.28 51.02 53.76 56.07 59.11 62.55 64.74
300 26.59 29.64 33.11 35.85 44.52 49.43 54.04 57.09 58.23 62.13 64.89 67.78 72.24
350 32.53 35.71 39.17 47.83 53.18 57.80 60.26 64.45 67.20 71.54 75.00 80.21
400 39.60 45.24 51.45 58.09 62.57 65.46 70.24 73.55 77.73 83.10 87.13
450 49.71 56.64 62.43 70.52 73.42 76.30 79.19 83.96 89.59 95.08
500 68.06 78.76 84.68 89.74 93.21 97.68 103.33 110.97 117.61
550 83.53 89.02 93.63 97.97 103.03 109.52 115.74 124.25
600 91.33 96.82 102.87 108.81 115.74 122.11 132.05
650 102.59 109.25 115.17 123.10 130.61 140.16
700 117.04 122.67 130.61 137.99 147.53
750 129.76 136.56 144.64 152.58
800 142.76 151.87 158.51
850 156.05 163.42
900 168.04
Curved blade grillesGrille only
Order code example CB1-01 250 200
(width) (height)
Grille with opposed blade damper
CB1-11 CB2-11 CB3-11 Prices +15% CB4-11 Prices
+15%
Prices +15%
• Manufactured from extruded aluminium with a satin anodised finish• Individually adjustable blades• For size including flange, add 45mm to width and height
CB1-01, CB1-11 1 way air patternCB2-01, CB2-11 2 way air patternCB3-01, CB3-11 3 way air patternCB4-01, CB4-11 4 way air pattern
Options• Paint finish to BS or RAL
Prices on request
CB1-01 CB2-01 Prices +15% CB4-01CB3-01
Aluminium grilles & diffusers
31Sales and product information is available at www.ventilationcentre.co.ukSizes are nominal unless shown otherwise. Prices exclude delivery and VAT. Subject to our terms and conditions of sale.
Aluminium grilles & diffusers
Heightmm
Width mm
100 150 200 250 300 350 400 450 500 550 600
100 10.56 10.56 11.29 12.14 13.74 15.20 16.93 18.79 22.84 23.28 25.01
150 11.00 11.73 13.02 14.17 15.91 18.38 19.95 23.71 24.73 26.46
200 13.60 14.46 15.77 17.51 19.37 23.12 24.58 26.31 27.03
250 17.63 18.94 21.26 23.71 26.03 28.33 32.95 36.70
300 22.84 23.71 26.17 28.62 31.09 37.01 37.29
350 27.03 29.48 31.37 35.85 39.17 45.54
400 31.80 35.13 38.44 45.24 47.83
450 40.62 43.93 47.98 50.30
500 48.56 51.02 53.76
550 54.33 60.26
600 63.87
Heightmm
Width mm
100 150 200 250 300 350 400 450 500 550 600
100 14.04 14.04 15.20 15.91 17.21 19.37 20.82 25.60 26.31 28.91 33.68
150 14.90 16.20 17.63 19.66 20.97 23.28 26.46 29.20 31.80 34.69
200 17.06 19.22 21.26 23.43 26.17 30.64 32.83 33.68 35.55
250 22.42 25.01 28.04 30.92 35.26 36.57 40.04 42.64
300 28.20 30.79 33.39 36.13 38.60 44.52 46.11
350 33.39 37.29 42.34 44.66 48.71 51.31
400 39.31 44.94 46.98 50.86 53.47
450 49.28 53.34 57.23 58.54
500 57.52 61.56 67.78
550 66.34 71.96
600 75.13
Non-vision grilleGrille only
Order code example NV01 250 200
(width) (height)
NV01
Grille with reverse flange
• Manufactured from extruded aluminium with a satin anodised finish• Single row of inverted V-profile, fixed horizontal blades• For size including flange, add 45mm to width and height
Options• Double inverted blade profile• Paint finish to BS or RAL
Prices on request
NV11
Sales and product information is available at www.ventilationcentre.co.ukSizes are nominal unless shown otherwise. Prices exclude delivery and VAT. Subject to our terms and conditions of sale. 32
Aluminium grilles & diffusers
Heightmm
Width mm
150 200 250 300 350 400 450 500 550 600 650 700 750 800 850 900
150 17.81 19.68 22.23 24.28 26.65 29.52 30.89 33.82 36.98 40.91 42.88 46.17 49.57 52.98 55.94 59.95
200 22.62 24.99 26.65 29.05 31.26 36.24 38.28 40.99 44.17 47.83 50.41 54.27 58.50 60.91 65.33
250 27.60 29.05 33.64 36.24 38.52 43.03 46.17 48.57 52.94 55.94 59.95 64.41 68.60 72.14
300 31.09 36.24 38.28 43.03 46.39 49.11 53.19 58.29 60.91 64.57 70.64 75.44 79.32
350 40.11 44.17 47.29 50.77 54.08 58.74 62.76 66.96 71.19 76.37 81.89 85.39
400 47.83 50.77 55.37 59.95 63.10 68.60 72.14 77.29 82.65 87.41 93.31
450 55.19 57.92 65.65 68.60 73.42 78.38 82.65 87.58 94.24 99.63
500 65.49 70.82 75.11 79.67 85.39 90.94 97.55 102.64 109.11
550 74.51 82.65 87.18 94.24 99.64 106.17 112.79 119.33
600 89.44 95.32 101.97 107.82 115.93 123.02 137.72
650 102.11 107.82 114.99 123.37 129.61 151.67
700 116.31 122.94 131.95 138.41 153.49
750 129.34 138.21 145.74 155.51
800 147.64 156.74 164.17
850 164.31 174.13
900 184.24
Cover grilleFor surface mounting - 31mm depth
Order code example CV 250 200
(width) (height)
CV
• Manufactured from extruded aluminium with a satin anodised finish• Single row of inverted V-profile, fixed horizontal blades• For size including flange, add 70mm to width and height
Options• Paint finish to BS or RAL
Prices on request
33Sales and product information is available at www.ventilationcentre.co.ukSizes are nominal unless shown otherwise. Prices exclude delivery and VAT. Subject to our terms and conditions of sale.
Heightmm
Standard type Grille with damper Floor type Grille with damper
Width mm Width mm Width mm Width mm
1st 300 Add 300 1st 300 Add 300 1st 300 Add 300 1st 300 Add 300
50 10.08 4.91 17.64 10.08
62.5 10.92 5.04 18.52 10.21
75 11.84 5.67 19.91 10.96
87.5 12.98 5.80 20.79 11.21
100 13.73 5.88 22.43 11.97 20.52 12.35 28.85 20.66
112.5 15.12 7.06 23.18 12.73 24.70 14.87 33.39 23.56
125 15.50 7.18 23.81 13.23 24.70 14.87 33.39 23.56
150 17.14 8.06 26.08 14.99 24.70 14.87 33.39 23.56
200 21.04 9.83 27.59 17.14 32.89 19.66 42.34 30.11
250 24.82 11.21 35.41 19.91 35.78 23.06 46.49 33.26
300 28.10 12.98 39.82 22.43 39.31 24.70 50.90 36.04
350 31.25 14.99 42.34 25.45 44.23 31.25 54.05 43.97
400 34.40 17.64 47.88 28.85 52.54 36.04 66.91 50.40
450 37.67 19.53 51.28 31.25
500 41.08 21.04 62.62 38.30
550 44.48 22.93 66.65 40.32
600 48.26 23.56 71.06 42.59
Linear bar grillesWith steel support bars/spacer sections
LBS01 LBS11
Aluminium grilles & diffusers
• Manufactured from extruded aluminium with a satin anodised finish• Single row of 0˚ fixed horizontal blades• For size including flange, add 45mm to width and height
Widths up to 2400mm - price as 1st 300mm and add 300mm amounts for the remainderRepeat for wider grilles, eg. 3000mm - price as 2 x 1st 300mm and 8 x add 300mm
Options• 15˚ blade angle• Access panel• Core only• Paint finish to BS or RAL
Prices on request
Other products also availableLinear slot diffuser
Order code example LBS01 900 150
(width) (height)
LBF01 LBF11
Sales and product information is available at www.ventilationcentre.co.ukSizes are nominal unless shown otherwise. Prices exclude delivery and VAT. Subject to our terms and conditions of sale. 34
Aluminium grilles & diffusers
Heightmm
Width mm
150 225 300 375 450 525 600 750 900
150 30.28 32.63 35.24 37.85 40.47 43.22 45.56 66.06 69.39
225 41.43 46.51 48.03 51.47 54.77 58.48 81.75 90.10
300 53.13 57.80 62.61 67.57 71.97 89.17 109.71
375 65.09 69.91 74.73 79.68 100.86 124.01
450 82.29 86.69 91.23 118.21 137.77
525 97.02 104.17 125.64 165.29
600 112.56 127.17 176.65
Heightmm
Width mm
150 225 300 375 450 525 600 750 900
150 37.85 42.67 45.83 52.30 56.84 63.03 69.22 76.70 107.30
225 53.54 59.46 65.23 71.70 78.44 82.85 103.61 136.12
300 66.74 77.20 84.49 92.48 98.53 113.25 139.70
375 86.69 94.26 108.58 111.60 127.57 156.82
450 108.30 116.56 124.95 142.42 158.66
525 141.33 154.80 179.85 204.75
600 164.43 189.62 219.06
Diffuser with opposed blade damper
LF4-11LF3-11LF2-11LF1-11 Prices +10%
Louvred face diffusersDiffuser only
Order code example LF1-01 300 225
(width) (height)
Prices +10%
• Manufactured from extruded aluminium with a platinum silver finish• Spring loaded removable inner core• For size including flange, add 145mm to width and height• For ceiling opening size, add 100mm to width and height
LF1-01, LF1-11 1 way air patternLF2-01, LF2-11 2 way air patternLF3-01, LF3-11 3 way air patternLF4-01, LF4-11 4 way air pattern
Options• Blanking plates• 2 way corner pattern• Paint finish to BS or RAL
Prices on request
LF1-01 LF2-01 LF3-01 LF4-01
35Sales and product information is available at www.ventilationcentre.co.ukSizes are nominal unless shown otherwise. Prices exclude delivery and VAT. Subject to our terms and conditions of sale.
Heightmm
Width mm
150 200 250 300 350 400 450 500 550 600 650 700 750 800 850 900
150 17.54 20.58 24.55 26.29 29.34 29.34 30.35 30.35 31.65 31.65 39.60 39.60 41.57 41.57 43.51 43.51
200 21.02 24.55 26.29 28.04 31.09 31.09 32.83 32.83 34.55 34.55 40.24 40.24 43.55 43.55 43.51 43.51
250 24.55 26.29 28.04 29.79 35.99 35.99 38.31 38.31 39.29 39.29 43.07 43.07 45.37 45.37 47.83 47.83
300 26.29 28.04 29.79 33.30 39.17 39.17 41.63 41.63 44.38 44.38 47.12 47.12 49.71 49.71 52.60 52.60
350 39.03 39.03 39.03 39.03 42.20 42.20 45.24 45.24 48.71 48.71 53.76 53.76 54.77 54.77 58.09 58.09
400 42.06 42.06 42.06 42.06 46.40 46.40 50.00 50.00 54.92 54.92 59.25 59.25 63.73 63.73 68.21 68.21
450 43.93 43.93 43.93 43.93 48.71 48.71 53.34 53.34 58.38 58.38 63.16 63.16 67.78 67.78 72.54 72.54
500 46.11 46.11 46.11 46.11 51.60 51.60 56.23 56.23 61.43 61.43 66.62 66.62 71.96 71.96 77.02 77.02
550 47.83 47.83 47.83 47.83 53.62 53.62 59.25 59.25 65.31 65.31 70.81 70.81 76.87 76.87 82.51 82.51
600 51.89 51.89 51.89 51.89 58.38 58.38 65.03 65.03 71.54 71.54 77.89 77.89 88.72 88.72 91.33 91.33
650 53.90 53.90 53.90 53.90 60.98 60.98 67.78 67.78 74.72 74.72 81.79 81.79 90.53 90.53 95.80 95.80
700 55.94 55.94 55.94 55.94 63.59 63.59 70.81 70.81 78.32 78.32 86.13 86.13 93.64 93.64 101.14 101.14
750 57.95 57.95 57.95 57.95 65.90 65.90 73.70 73.70 81.79 81.79 89.59 89.59 97.55 97.55 105.77 105.77
800 61.85 61.85 61.85 61.85 70.67 70.67 79.47 79.47 88.14 88.14 96.95 96.95 105.77 105.77 114.58 114.58
850 63.73 63.73 63.73 63.73 72.99 72.99 82.23 82.23 91.33 91.33 100.57 100.57 109.38 109.38 118.64 118.64
900 66.18 66.18 66.18 66.18 75.87 75.87 85.69 85.69 95.65 95.65 105.35 105.35 115.02 115.02 124.69 124.69
• Manufactured from extruded aluminium; mill finish• Single row of fixed horizontal blades• Rear mesh guard• For size including flange, add 30mm to width and height
Options• 50mm, 75mm and 100mm blade pitch• Double bank of blades• Insect screen• Recessed or concealed flange• Paint finish to BS or RAL
Prices on request
Other products also availablePenthouse louvre, Acoustic louvre and Sand-trap louvre
Aluminium grilles & diffusers
Weather louvre38mm blade pitch
Order code example WL38 250 200
(width) (height)
WL38
Sales and product information is available at www.ventilationcentre.co.ukSizes are nominal unless shown otherwise. Prices exclude delivery and VAT. Subject to our terms and conditions of sale. 36
WaterlooAir Products
Product Description Code Each
Egg crate grille
150mm x 150mm E150 7.01
200mm x 200mm E200 10.33
250mm x 250mm E250 11.35
300mm x 150mm E315 9.31
300mm x 300mm E300 12.45
600mm x 600mm (overall) E600 37.12
Single deflectiongrille
150mm x 150mm S150 10.33
200mm x 200mm S200 11.61
250mm x 250mm S250 13.07
300mm x 150mm S315 17.70
300mm x 300mm S300 11.61
Double deflectiongrille
150mm x 150mm D150 10.33
200mm x 200mm D200 16.13
250mm x 250mm D250 18.07
300mm x 150mm D315 18.83
300mm x 300mm D300 24.35
Fixed bladegrille 45º
150mm x 150mm A150 7.70
200mm x 200mm A200 9.05
250mm x 250mm A250 10.11
300mm x 150mm A315 9.27
300mm x 300mm A300 10.69
Fixed bladegrille 0º
150mm x 150mm G150 7.59
200mm x 200mm G200 9.05
250mm x 250mm G250 10.00
300mm x 150mm G315 9.09
300mm x 300mm G300 10.51
Door transfergrilles (pair)
150mm x 150mm T150 36.20
200mm x 200mm T200 42.48
250mm x 250mm T250 49.28
300mm x 150mm T315 45.40
300mm x 300mm T300 54.02
Opposed bladedamper
Fits to grille using neck reducer
GO150 9.71
GO200 11.24
GO250 16.57
GO315 24.67
GO300 19.78
Neck reducer
Ø 100mm N150 5.48
Ø 150mm N200 6.79
Ø 200mm N250 6.79
Ø 100mm N315 8.36
Ø 250mm N300 8.36
• Manufactured from high grade engineering polymer in white• Snap-fix connection• Suitable for temperatures up to +50ºC• Conforms to BS476 part 5, P rating BS476 parts 6 and 7 class-O, BS2782 method 508a zero rate of burn, NFPA255, ASTM E84-91a class-A
Aircell grille range
Aircell polymer grilles & diffusers
37Sales and product information is available at www.ventilationcentre.co.ukSizes are nominal unless shown otherwise. Prices exclude delivery and VAT. Subject to our terms and conditions of sale.
Product Description Code Each
Multi-conediffuser
300mm x 300mm (overall) M300 12.19
450mm x 450mm (overall) M450 22.74
500mm x 500mm (overall) M500 24.27
600mm x 600mm (overall) M600 30.48
625mm x 625mm (overall) M625 52.20
Cellulardiffuser
300mm x 300mm (overall) 2300 14.71
600mm x 600mm (overall) 2600 29.67
Opposedblade
damperFits to diffuser using plenum
O300 14.42
O450 20.11
O600 38.06
Plenum
Ø 200mm P300 12.70
Ø 250mm P450 16.17
Ø 400mm P600 23.69
Fixing kit Fits to plenum for diffuser screw attachment
F300 0.88
F450 0.99
F600 1.20
Spigot reducer Adapts P600 to Ø 315mm
R600 8.83
Blanking kitM
Fits to multi-cone diffuser
BM300 4.16
BM450 7.56
BM600 11.86
Blanking kit2000
Fits to cellular diffuser
B300 4.53
B600 7.37
Aircell diffuser range
Aircell polymer grilles & diffusers
Sales and product information is available at www.ventilationcentre.co.ukSizes are nominal unless shown otherwise. Prices exclude delivery and VAT. Subject to our terms and conditions of sale. 38
W x Hmm
Min ductØ mm
Singledeflection
Doubledeflection
Single defwith blade
damper
Double def with blade
damper
Single def with hit & miss
damper
Single def with inclined
damper
Double def with inclined
damper
325 x 75 160 21.97 23.83 32.39 35.17 34.25 37.70 40.48
425 x 75 160 23.37 25.91 37.02 39.56 38.16 43.73 46.26
525 x 75 160 26.62 28.93 40.73 43.03 41.65 47.42 49.74
625 x 75 160 29.39 32.63 45.34 48.58 46.26 56.92 60.15
825 x 75 160 44.65 52.74 51.82 59.92 66.85 72.87 80.96
1025 x 75 160 58.08 60.61 60.15 69.17 77.50 88.14 97.16
1225 x 75 160 65.93 67.79 69.41 77.26 86.98 102.01 109.89
325 x 125 250 21.05 24.07 34.25 37.24 37.48 39.78 42.81
425 x 125 250 23.37 27.08 40.73 44.42 42.11 49.50 53.22
525 x 125 250 26.62 30.77 47.20 51.36 48.82 52.51 56.68
625 x 125 250 29.61 33.79 51.82 56.00 55.30 60.61 64.77
825 x 125 250 46.50 58.08 61.07 72.65 70.79 73.57 85.14
1025 x 125 250 51.59 66.64 72.19 84.21 81.42 93.91 105.95
1225 x 125 250 59.92 73.29 80.50 92.99 92.76 105.49 117.98
325 x 150 315 21.05 26.16 35.17 41.65 39.78 42.81 47.66
425 x 150 315 24.29 29.39 39.58 49.04 45.80 49.28 54.35
525 x 150 315 27.31 33.09 46.26 55.52 50.44 54.60 60.38
625 x 150 315 30.07 36.55 53.68 67.56 56.22 60.15 66.64
825 x 150 315 47.88 62.93 63.85 81.42 78.66 83.75 98.78
1025 x 150 315 54.60 72.19 74.95 87.90 92.30 98.10 113.83
1225 x 150 315 61.99 79.40 86.06 103.63 104.57 111.51 128.16
325 x 225 500 21.29 28.23 39.78 46.04 48.12 46.96 53.22
425 x 225 500 24.53 31.47 45.34 52.28 54.60 54.35 61.31
525 x 225 500 28.23 35.40 50.90 58.08 65.23 59.92 67.10
625 x 225 500 31.47 39.32 57.38 65.23 68.48 68.48 76.34
825 x 225 500 49.04 67.79 70.33 89.06 94.86 92.30 111.05
1025 x 225 500 56.46 77.72 84.21 103.87 113.35 109.89 129.54
1225 x 225 500 64.09 83.17 97.16 118.20 132.55 128.51 140.19
Direct mount grilles
RGS direct mount grillesGalvanised finish - assembled without the use of welding
• Manufactured from galvanised mild steel• Adjustable vertical blades• Flanges close tight to duct
Options• Paint finish to BS or RAL
Prices on request
RGS0 RGS1 RGS2 RGS3 RGS4 RGS6 RGS7
39Sales and product information is available at www.ventilationcentre.co.ukSizes are nominal unless shown otherwise. Prices exclude delivery and VAT. Subject to our terms and conditions of sale.
W x Hmm
Min ductØ mm
Single deflectionSingle deflection
with blade damper
300 x 75 150 21.42 30.60
400 x 75 150 25.50 35.49
500 x 75 150 29.58 40.59
600 x 75 150 33.83 45.90
300 x 100 200 24.48 34.64
400 x 100 200 28.56 39.74
500 x 100 200 32.81 45.05
600 x 100 200 37.23 50.58
300 x 150 250 27.37 38.68
400 x 150 250 31.62 43.99
500 x 150 250 36.04 49.51
600 x 150 250 40.63 55.25
300 x 200 300 30.26 42.71
400 x 200 300 34.68 48.24
500 x 200 300 39.27 53.98
600 x 200 300 44.03 59.93
DMG direct mount grillePolyester powder coated finish in black
• Manufactured from zinc-coated steel• Adjustable vertical blades• Flanges close tight to duct
Options• Egg crate, double deflection and fixed blade types• Paint finish to BS or RAL
Prices on request
Direct mount grilles
DMG01 DMG11
Sales and product information is available at www.ventilationcentre.co.ukSizes are nominal unless shown otherwise. Prices exclude delivery and VAT. Subject to our terms and conditions of sale. 40
Pressed steel grilles & diffusers
Heightmm
Width mm
100 150 200 250 300 350 400 450 500 600
100 4.39 4.59 4.78 5.17 5.99 7.59 9.37 9.99 24.60 28.69
150 5.20 5.99 7.59 5.72 8.78 9.56 10.29 26.14 30.50
200 6.07 7.20 8.78 9.17 11.16 12.49 28.44 32.54
250 7.81 9.95 11.54 14.34 15.29 50.73 56.36
300 10.83 13.56 15.16 15.93 52.79 60.98
350 14.74 17.14 18.74 54.84 62.75
400 19.79 21.53 56.61 64.80
450 22.10 58.93 66.86
500 60.98 68.91
600 71.23
Return air grille6mm depth for surface mounting
Order code example 33G 250 200
(width) (height)
33G
• Manufactured from mild steel with white finish• Fixed horizontal blades• For sizes including flange, add 32mm to width and height
Options• Paint finish to BS or RAL
Prices on request
Heightmm
Width mm
100 150 200 250 300 350
100 10.60 11.50 11.80 15.85 23.98 39.02
150 11.55 12.04 21.10 24.46 39.82
200 12.28 24.81 24.96 40.63
250 24.92 25.48 41.46
300 25.99 42.31
350 43.17
Supply air registerWith lever operated multi-blade damper
44R
• Manufactured from mild steel with white finish• Fixed vertical blades with 2 way air pattern• For sizes including flange, add 32mm to width and height
Options• Paint finish to BS or RAL
Prices on request
W x Hmm
Floor type Ceiling type
250 x 57 13.57 12.06
300 x 57 15.38 13.19
350 x 57 17.17 13.19
250 x 100 16.92 15.17
300 x 100 18.69 15.54
350 x 100 20.50 16.31
DiffusersWith toe or pull-cord operated damper
22FD
• Manufactured from mild steel with white finish• Fixed vertical blades with 2 way air pattern• For sizes including flange, add 38mm to width and height
Options• Without damper• Paint finish to BS or RAL
Prices on request
22CP
41Sales and product information is available at www.ventilationcentre.co.ukSizes are nominal unless shown otherwise. Prices exclude delivery and VAT. Subject to our terms and conditions of sale.
Ømm
Multi-cone Adjustable multi-cone Rotational Jet nozzle
Standard With damper Standard With damper Fixed Adjustable Standard With plate
125 38.22 52.70 60.80
160 17.12 23.62 35.50 53.30 47.77 58.10 67.55
200 20.72 27.98 46.38 67.88 58.20 59.02 86.47
250 27.27 35.08 54.00 80.00 67.75 129.35 117.55 133.76
315 34.26 42.64 69.90 101.70 95.56 146.18 145.24 185.78
355 44.16 54.43 90.00 126.90
400 53.62 64.75 108.00 150.80 196.75
450 138.00 187.90
500 168.00 226.00 236.54
630 301.60
Architectural diffusers
Circular diffusersSpigot connection
• DCN provides a uniform air pattern in all directions, providing a high level of induction For use in applications up to 4m high with a temperature differential of up to +12˚ C Anodised matt silver finish
• DCG is as DCN with adjustable inner cones for modifying the air pattern between horizontal and vertical projections Metallic grey finish
• AXP provides a rotational diffusion of the air-stream, providing a high induction index For use in applications 2.6m to 4m high with a temperature differential of up to +12˚C White finish
• AX6-MA is as AXP with synchronously adjustable vanes for modifying the air pattern between horizontal and vertical projections For use in applications above 4m high with a temperature differential of up to +15˚C White finish
• KAM types are a long throw adjustable jet nozzle for air diffusion into large spaces with directional control White finish
Above products are manufactured from aluminium
Options• Ceiling tile replacement versions of DCN, DCG and AXP• Motorised version of AX6• Paint finish to BS or RAL
Prices on request
Other products also availableTop entry and side entry plenums with fixing bars available with integral dampers and acoustic lining
DCN DCN/R3E DCG DCG/R2G AXP AX6-MA KAM-D KAM-W
Sales and product information is available at www.ventilationcentre.co.ukSizes are nominal unless shown otherwise. Prices exclude delivery and VAT. Subject to our terms and conditions of sale. 42
W x H mmoverall
Swirl Adjustable swirl Perforated face with plenum
Radial Radial Inclined radial Square radial Supply Extract
300 x 300 49.32 49.32 41.21 41.21
310 x 310 49.32 49.32 54.73
400 x 400 40.38 56.49 56.49 62.86 51.78 51.78
500 x 500 45.96 77.16 77.16 81.55 62.37 62.37
600 x 600 52.04 80.38 80.38 90.52 72.28 72.28
625 x 625 53.03 85.06 85.06 92.85 75.90 75.90
800 x 800 130.49 130.49 137.64
825 x 825 132.07 132.07 139.24
Ø mmoverall
Swirl Adjustable swirl
Radial Radial Inclined radial
300 57.28 57.28
400 43.00 63.65 63.65
500 45.61 81.96 81.96
600 49.78 87.51 87.51
625 52.04 93.08 93.08
800 137.64 137.64
825 140.02 140.02
Architectural diffusers
Circular diffusersSquare plate diffusers
RXO-S AXO-S AXO-SY AXO-SX DFZ-S4 DFZ-R
Circular plate diffusers
RXO-C AXO-C AXO-CY
• RXO types provide a uniform swirl air pattern with a coanda effect providing a high level of induction and a reduction in stratification Has a flow variation of 60% for maintaining a stable air-stream For use in applications 2.6m to 4m high with a temperature differential of up to +12˚C White finish
• AXO types are as RXO with adjustable vanes for modifying the supply angle to adjust to different architectonic environments
• DFZ-S4 has a 4-way horizontal air supply with an accentuated coanda effect Multiple small openings provide a high level of induction whilst maintaining a uniform air-stream from the face area For use in applications 2.6m to 4m high with a temperature differential of up to +12˚C White finish
Above products are manufactured from galvanised mild steel
Options• Reduced face area versions of RXO-S, AXO-S• DFZ-R without plenum• Paint finish to BS or RAL• White vane versions of AXO types
Prices on request
43Sales and product information is available at www.ventilationcentre.co.ukSizes are nominal unless shown otherwise. Prices exclude delivery and VAT. Subject to our terms and conditions of sale.
Heightmm
Width mm
100 150 200 250 300 350 400 450 500 550 600 650 700 750 800 850 900
100 19.86 21.95 24.04 26.13 28.22 31.35 34.49 37.62 40.76 43.89 48.07 56.43 60.61 65.84 71.06 81.51 85.69
150 21.95 24.04 26.13 28.22 31.35 34.49 37.62 40.76 43.89 48.07 56.43 60.61 65.84 71.06 81.51 85.69
200 24.04 26.13 28.22 31.35 34.49 37.62 40.76 43.89 48.07 56.43 60.61 65.84 71.06 81.51 85.69
250 26.13 28.22 31.35 34.49 37.62 40.76 43.89 48.07 56.43 60.61 65.84 71.06 81.51 85.69
300 28.22 31.35 34.49 37.62 40.76 43.89 48.07 56.43 60.61 65.84 71.06 81.51 85.69
350 31.35 34.49 37.62 40.76 43.89 48.07 56.43 60.61 65.84 71.06 81.51 85.69
400 34.49 37.62 40.76 43.89 48.07 56.43 60.61 65.84 71.06 81.51 85.69
450 37.62 40.76 43.89 48.07 56.43 60.61 65.84 71.06 81.51 85.69
500 40.76 43.89 48.07 56.43 60.61 65.84 71.06 81.51 85.69
550 43.89 48.07 56.43 60.61 65.84 71.06 81.51 85.69
600 48.07 56.43 60.61 65.84 71.06 81.51 85.69
650 56.43 60.61 65.84 71.06 81.51 85.69
700 60.61 65.84 71.06 81.51 85.69
750 65.84 71.06 81.51 85.69
800 71.06 81.51 85.69
850 81.51 85.69
900 85.69
Heightmm
Width mm
100 150 200 250 300 350 400 450 500 550 600 650 700 750 800 850 900
100 13.05 13.33 14.22 15.11 16.00 17.78 19.56 22.22 24.00 26.67 28.44 33.30 35.10 36.00 37.80 43.20 49.50
150 13.33 14.22 15.11 16.00 17.78 19.56 22.22 24.00 26.67 28.44 33.30 35.10 36.00 37.80 43.20 49.50
200 14.22 15.11 16.00 17.78 19.56 22.22 24.00 26.67 28.44 33.30 35.10 36.00 37.80 43.20 49.50
250 15.11 16.00 17.78 19.56 22.22 24.00 26.67 28.44 33.30 35.10 36.00 37.80 43.20 49.50
300 16.00 17.78 19.56 22.22 24.00 26.67 28.44 33.30 35.10 36.00 37.80 43.20 49.50
350 17.78 19.56 22.22 24.00 26.67 28.44 33.30 35.10 36.00 37.80 43.20 49.50
400 19.56 22.22 24.00 26.67 28.44 33.30 35.10 36.00 37.80 43.20 49.50
450 22.22 24.00 26.67 28.44 33.30 35.10 36.00 37.80 43.20 49.50
500 24.00 26.67 28.44 33.30 35.10 36.00 37.80 43.20 49.50
550 26.67 28.44 33.30 35.10 36.00 37.80 43.20 49.50
600 28.44 33.30 35.10 36.00 37.80 43.20 49.50
650 33.30 35.10 36.00 37.80 43.20 49.50
700 35.10 36.00 37.80 43.20 49.50
750 36.00 37.80 43.20 49.50
800 37.80 43.20 49.50
850 43.20 49.50
900 49.50
Side entry plenum20mm self-flange
PSE For depth, add 100mm to spigot dimension
Plenums
Top entry plenum100mm depth, 20mm self-flange
PTE
Order code example PTE 250 200 150
(width) (height) (diameter)
• Manufactured from galvanised mild steel
Order code example PSE 250 200 150
(width) (height) (diameter)
Sales and product information is available at www.ventilationcentre.co.ukSizes are nominal unless shown otherwise. Prices exclude delivery and VAT. Subject to our terms and conditions of sale. 44
Plenums
Heightmm
Width mm
100 150 200 250 300 350 400 450 500 550 600 650 700 750 800 850 900
100 31.35 31.35 32.40 33.44 35.53 37.62 39.71 41.80 43.89 45.98 51.21 53.30 56.43 62.70 73.15 81.51 89.87
150 31.35 32.40 33.44 35.53 37.62 39.71 41.80 43.89 45.98 51.21 53.30 56.43 62.70 73.15 81.51 89.87
200 32.40 33.44 35.53 37.62 39.71 41.80 43.89 45.98 51.21 53.30 56.43 62.70 73.15 81.51 89.87
250 33.44 35.53 37.62 39.71 41.80 43.89 45.98 51.21 53.30 56.43 62.70 73.15 81.51 89.87
300 35.53 37.62 39.71 41.80 43.89 45.98 51.21 53.30 56.43 62.70 73.15 81.51 89.87
350 37.62 39.71 41.80 43.89 45.98 51.21 53.30 56.43 62.70 73.15 81.51 89.87
400 39.71 41.80 43.89 45.98 51.21 53.30 56.43 62.70 73.15 81.51 89.87
450 41.80 43.89 45.98 51.21 53.30 56.43 62.70 73.15 81.51 89.87
500 43.89 45.98 51.21 53.30 56.43 62.70 73.15 81.51 89.87
550 45.98 51.21 53.30 56.43 62.70 73.15 81.51 89.87
600 51.21 53.30 56.43 62.70 73.15 81.51 89.87
650 53.30 56.43 62.70 73.15 81.51 89.87
700 56.43 62.70 73.15 81.51 89.87
750 62.70 73.15 81.51 89.87
800 73.15 81.51 89.87
850 81.51 89.87
900 89.87
Direct mount plenum100mm depth, internal and external 20mm self-flanges
PDMFor overall size, add 40mm to width and height
W x Hmm
Spigot Ø mm
100 125 150 200 250 300 350 400 450
100 x 100 7.92
150 x 150 9.80 9.80 9.80
200 x 200 10.21 10.21 10.21 10.21
225 x 225 10.34 10.34 10.34 10.34
230 x 230 10.48 10.48
250 x 250 10.56 10.56 10.56 10.56
300 x 300 10.73 10.73 10.73 10.73
350 x 350 11.09 11.09 11.09 11.09
400 x 400 14.47 14.47 14.47 14.47 14.47
450 x 450 15.17 15.17 15.17 15.17 15.17 15.17
460 x 460 16.51 16.51 16.51 16.51 16.51 16.51
500 x 500 20.06 20.06 20.06
550 x 550 21.00 21.00 21.00 21.00 21.00 21.00 21.00
Economy top entry plenum100mm depth, 20mm self-flange
ECP
• Manufactured from plastic, non-vision in black• 70% lighter than an equivalent steel plenum
Other products also availablePremier range (fire retardant plastic)
Order code example ECP 200 200 150
(width) (height) (diameter)
PDM 300 200 300
(width) (height) (diameter)
Order code example
45Sales and product information is available at www.ventilationcentre.co.ukSizes are nominal unless shown otherwise. Prices exclude delivery and VAT. Subject to our terms and conditions of sale.
Flexible ducts & hoses
Ømm
Glasflex Aliflex Semi-rigid flex Acoustic flex
Plain 6m length
Insulated 6m length
Plain10m length
Insulated10m length
Plain4m length
Insulated4m length
With interliner10m length
80 19.39 59.54 22.70 60.23 21.55 46.26
100 20.13 66.75 23.16 65.34 22.98 49.21 70.82
125 25.65 76.36 28.95 69.56 29.07 52.77 83.89
150 28.86 85.43 34.10 82.79 34.26 59.21 97.41
160 32.64 87.15 37.25 95.03 36.51 60.86 99.48
180 36.94 105.54 43.56 98.60 43.00 74.45 105.90
200 38.41 105.54 47.88 107.23 47.30 74.45 114.73
224 46.87 129.38 52.19 123.13 52.70 88.82 127.75
250 50.36 129.38 60.83 130.38 58.08 88.82 141.22
280 58.99 148.94 69.00 151.79 65.13 157.79
300 60.18 148.94 72.41 159.41 70.25 108.10 164.77
315 65.80 152.21 82.79 179.36 73.84 115.81 197.79
355 77.55 172.11 94.27 194.60 91.87 132.38 215.46
400 84.54 196.30 109.07 222.16 103.15 147.83 247.00
450 96.85 217.75 124.23 248.35 113.93 166.50 276.03
500 110.08 237.83 154.54 262.77 124.72 177.45 290.95
560 122.11 162.81 293.44
610 132.30 182.58 339.41
Flexible ductsFor use in general HVAC applications
Glasflex
• PVC coated glass fibre fabric in grey, suppported by an internal wire helix• GF11 is overlapped with 25mm thick fibre glass insulation, wrapped in a fabric aluminium jacket• For use in high, medium and low pressure systems and for fume extraction• Temperature range: -20˚C to +110˚C• Conforms to BS476 parts 6, 7 and 20
Aliflex
• Multi-ply aluminium and polyester laminate, supported by an encapsulated internal wire helix• AF11 is overlapped with 25mm thick fibre glass insulation, wrapped in a fabric aluminium jacket• For use in high, medium and low pressure systems• Temperature range: -30˚C to +120˚C• Conforms to BS476 parts 6, 7 and 20
Semi-rigid flex
• Corrugated aluminium strip, spirally wound with a double overlapped joint• SRF11 is overlapped with 25mm thick fibre glass insulation, wrapped in a fabric aluminium jacket• Allows flexibility in axial and lateral planes - ideal for final connections• Temperature range: -30˚C to +200˚C• Conforms to BS476 parts 6, 7 and 20 / CP413 section A2.2.3
Acoustic flex
• Multi-ply aluminium and polyester laminate inner core, supported by an internal wire helix• Inner core is micro perforated and covered with a transparent interliner, overlapped with 25mm thick fibre glass insulation, wrapped in a fabric aluminium jacket• For use in medium and low pressure systems where attenuation of duct borne noise is required• Temperature range: -30˚C to +120˚C• Conforms to BS476 parts 6, 7 and 20
GF01 GF11 AF01 AF11 SRF01 SRF11 ACF
Sales and product information is available at www.ventilationcentre.co.ukSizes are nominal unless shown otherwise. Prices exclude delivery and VAT. Subject to our terms and conditions of sale. 46
Flexible ducts & hoses
Cut lengths are subject to availability
• 2 ply rubber coated cotton fabric in black, supported by an encapsulated internal wire helix• For use in a wide range of air, dust, fume and light particle applications • Temperature range: -20˚C to +100˚C
Øinches
Lengthm
Per length Per metre
4¼ 9.14 196.70 25.83
4½ 9.14 209.20 27.47
5 9.14 249.65 32.78
5½ 7.62 249.34 39.27
6 9.14 318.80 41.86
6½ 7.62 295.94 46.61
7 6.1 256.97 50.56
8 6.1 321.84 63.31
9 4.57 338.84 88.98
10 4.57 456.66 119.92
12 4.57 601.65 157.99
Øinches
Lengthm
Per length Per metre
1 7.62 85.67 13.50
1¼ 9.14 94.42 12.40
1½ 9.14 109.84 14.43
1¾ 9.14 106.31 13.96
2 9.14 112.37 14.75
2¼ 9.14 131.20 17.23
2½ 9.14 131.46 17.26
2¾ 7.62 166.81 26.27
3 9.14 145.74 19.13
3¼ 7.62 131.93 20.78
3½ 9.14 160.29 21.05
4 9.14 183.41 24.08
Ømm
10m length Per metre
50 62.29 6.85
63 95.91 10.55
76 128.99 14.19
80 148.55 16.35
90 149.93 16.50
100 151.67 16.69
125 170.37 18.75
150 186.99 20.57
160 190.11 20.92
180 190.11 20.92
200 196.34 21.60
250 226.46 24.91
300 333.46 36.68
Polyurethane hose
Cut lengths are subject to availability
• Twin layered polyurethane, supported by an encapsulated internal copper wire helix• For use in abrasive applications ie. sawdust, general industrial and agricultural• Temperature range: -40˚C to +90˚C
Øinches
Plain per metre Packed per metre
2 9.96 12.52
2½ 13.24 16.66
3 18.50 23.28
3½ 24.00 30.30
4 28.23 37.12
4½ 34.64 43.96
5 40.95 53.80
5½ 47.64 60.24
6 51.85 66.92
6½ 55.10 70.20
7 56.18 72.50
8 74.81 94.60
9 93.45 114.50
10 110.73 136.48
11 124.95 151.90
12 142.41 174.54
Steelflex
SF01/SF11
• Electro-galvanised flexible carbon steel tube• SF11 has fibre or cotton packing• For use in heavy duty applications where strength and flexibility is required• Suitable for temperatures up to +500˚C• Conforms to BS1449
Wyrem Hose
WY-0603
PULR
47Sales and product information is available at www.ventilationcentre.co.ukSizes are nominal unless shown otherwise. Prices exclude delivery and VAT. Subject to our terms and conditions of sale.
Ømm
30m length Per metre
50 359.00 14.36
60 393.32 15.73
75 433.88 17.36
100 584.42 23.38
125 717.02 28.38
150 903.83 36.15
200 1,212.90 48.52
Ø mm
Lengthm
Per length Per metre
90 30 387.66 15.51
100 30 424.71 16.99
110 30 514.02 20.56
120 30 545.61 21.82
125 30 584.61 23.38
130 30 611.33 24.45
140 30 653.64 26.15
150 30 679.19 27.17
160 20 531.70 31.90
180 20 605.15 36.31
200 20 648.70 38.92
250 15 723.55 57.88
300 10 599.95 71.99
Ømm
Lengthm
Per length Per metre
20 50 106.60 2.56
25 50 136.50 3.28
30 50 187.85 4.51
32 50 200.20 4.80
35 50 240.18 5.76
38 50 270.73 6.50
40 50 277.23 6.65
45 50 306.80 7.36
50 50 310.70 7.46
60 50 422.50 10.14
63 50 422.50 10.14
70 50 475.48 11.41
75 50 497.58 11.94
80 30 330.72 13.23
• Grey PVC helix embedded in a clear anti-static flexible PVC compound; completely wire free
• For use where static build up of electrical charges have to be earthed ie. mining industry, textile industry, PVC granule transfer
• Static conductive compound ROE 1 x 109 ohm
• Temperature range: -10˚C to +60˚C
Flexible ducts & hoses
Cut lengths are subject to availability
AST
Anti-static hose
Crush recoverable hose
CRV
Cut lengths are subject to availability
• Solid nylon crush recoverable helix embedded in a black thermoplastic insertion rubber compound reinforced corrugated cover; smooth bore
• For the safe removal of toxic fumes, oil mist and chemicals ie. vehicle workshops, loading bays
• Temperature range: -40˚C to +150˚C
Sales and product information is available at www.ventilationcentre.co.ukSizes are nominal unless shown otherwise. Prices exclude delivery and VAT. Subject to our terms and conditions of sale. 48
Flue systems
1P500 1P1000 1AP500 1IP 1CP 1DS 1B90 1B45
Øinches
Pipe500mm length
Pipe1m length
Adj pipe300-500mm
Inspectionpipe
Cut-outpipe
Draughtstabiliser
Bend90˚
Bend45˚
4 25.39 39.31 62.52 45.40 46.40 36.23 38.00 32.77
5 26.89 41.66 62.52 45.40 46.40 36.23 38.28 33.02
6 27.58 42.74 63.04 46.83 47.66 40.89 39.31 34.08
7 28.74 44.56 70.94 53.35 48.93 45.95 43.23 34.61
8 32.64 50.57 83.86 57.04 50.36 50.73 48.49 35.40
9 36.36 56.33 88.26 66.26 52.41 38.00
10 40.25 62.35 117.41 68.96 57.65 39.31
12 45.64 70.74 68.12 47.17
14 61.00 94.53 79.65 50.43
1TP135 1TP90 1RF 1SC 1U 1AWB 1GWB
Øinches
Tee 135˚with plug
Tee 90˚with plug
Roof flashing Storm collarUniversal
cowlAdjustable
wall bracketGuy wirebracket
4 71.53 68.65 55.02 24.65 52.41 22.58 13.85
5 73.35 70.74 56.33 25.44 52.41 22.58 13.85
6 74.94 72.06 56.86 25.95 53.45 23.41 14.02
7 78.87 74.16 57.65 27.54 58.16 24.61 14.98
8 90.65 78.33 60.53 30.15 62.09 25.99 18.09
9 99.02 84.36 66.03 33.02 67.33 27.54 18.47
10 116.84 93.53 77.02 35.65 75.99 29.00 22.11
12 132.04 112.12 93.53 52.16 98.00 30.38 24.22
14 150.08 119.63 97.55 64.85 135.69 32.33 28.03
Single wall flueFor use with commercial gas or oil systems
• Manufactured from 0.6mm gauge, 430 grade stainless steel• 1DS, 1AWB and 1GWB are galvanised mild steel
Options• 0.8mm or 1mm gauges• 304 and 316 grade stainless steel
Prices on request
Other products also availableLocking band, Guy wire rope and Modular header
49Sales and product information is available at www.ventilationcentre.co.ukSizes are nominal unless shown otherwise. Prices exclude delivery and VAT. Subject to our terms and conditions of sale.
Flue systems
2P100 2P250 2P500 2P1000 2AP450 2AP950 2IP 2IPD
Ø mminner
Pipe100mm length
Pipe250mm length
Pipe500mm length
Pipe1m length
Adj pipe250-450mm
Adj pipe500-950mm
Inspectionpipe
Inspectionpipe with door
125 64.63 65.47 69.27 96.62 120.24 145.22 115.92 154.97
150 69.56 71.13 75.07 108.92 132.60 159.98 133.89 166.34
175 71.41 73.02 78.84 126.87 139.99 168.88 155.94 188.33
200 73.41 75.07 86.36 141.58 151.59 192.41 174.02 247.66
250 94.13 96.28 102.60 175.25 175.52 211.40 215.42 271.44
300 103.99 106.25 119.01 211.34 194.47 233.63 259.78 347.94
350 117.29 154.75 290.49 259.57 312.47 357.06 414.60
400 169.45 210.83 349.14 333.19 403.94 429.15 477.42
2D 2S 2TC 2TCD 2T135 2T90 2B90 2B45
Ø mminner
Damper Silencer Tee capTee cap
with drainTee135˚
Tee90˚
Bend90˚
Bend45˚
125 112.03 120.75 18.78 20.44 210.13 157.98 146.51 86.17
150 118.57 139.45 21.27 22.88 246.92 175.93 151.15 88.90
175 124.11 162.45 23.72 24.52 265.71 190.65 166.44 97.92
200 127.17 181.28 26.96 28.61 298.87 217.68 181.10 106.53
250 133.86 224.39 30.09 31.39 398.56 250.33 215.38 126.69
300 142.48 270.60 35.14 35.94 473.97 314.94 265.11 155.94
350 189.33 44.12 46.59 549.37 364.53 198.17
400 210.35 50.67 53.12 722.04 452.08 282.12
MD plus range - twin wall flueFor use with domestic boilers, warm air and water heaters (oil and gas)
• Inner wall manufactured from stainless steel AISI 316, outer wall from stainless steel AISI 304 18/10 Cr Ni with 25mm high density insulation• +400˚C continuous working temperature• Recommended for liquid and soft combustibles
Sales and product information is available at www.ventilationcentre.co.ukSizes are nominal unless shown otherwise. Prices exclude delivery and VAT. Subject to our terms and conditions of sale. 50
2SDA 2DSA 2FSP 2BSD 2FS 2AWS 2RS 2AWB
Ø mminner
Single-doubleadapter
Double-singleadapter
Fire stopplate
Base supportwith drain
Floorsupport
Adj wallsupport
Roofsupport
Adj wallbracket
125 24.88 24.88 13.09 80.85 106.70 66.72 43.15 17.16
150 26.32 26.32 14.71 91.26 118.21 77.23 44.42 18.80
175 29.65 29.65 17.16 100.27 128.67 86.76 45.23 21.27
200 32.50 32.50 20.44 107.04 139.13 95.83 45.54 22.88
250 36.34 36.34 22.07 123.25 162.37 119.42 47.60 26.16
300 39.21 39.21 24.52 141.39 182.04 150.94 50.17 27.78
350 59.29 59.29 34.33 158.41 177.21 92.68
400 63.06 63.06 40.86 172.93 222.75 105.93
2B30 2B15 2RC 2CT 2ST 2RT 2WT 2BT
Ø mminner
Bend30˚
Bend15˚
Raincap
Conicalterminal
Staticterminal
Anti-rain topterminal
Anti-windterminal
Anti-birdterminal
125 80.94 80.94 30.17 40.28 50.29 38.41 53.13 48.03
150 84.27 84.27 33.54 46.99 57.10 44.12 61.30 55.58
175 96.09 96.09 35.94 50.82 62.70 48.22 67.02 58.42
200 100.11 100.11 45.76 57.55 68.66 55.58 73.56 64.97
250 124.79 124.79 64.49 64.26 73.11 62.13 80.10 68.66
300 154.53 154.53 79.30 96.87 94.04 94.80 100.51 97.26
350 163.87 163.87 114.53 120.85 125.03 121.78
400 244.48 244.48 128.01 134.26 143.03 137.30
2GWB 2LB 2DB 2SC 2F10 2F35 2LK
Ø mminner
Guy wirebracket
Levelbracket
Descendbracket
Stormcollar
Flashing0-10˚
Flashing5-35˚
Lockingband
125 13.70 39.52 17.01 19.90 46.59 46.59 9.78
150 14.17 42.90 19.54 21.46 53.94 53.94 10.47
175 14.49 47.63 21.19 21.77 59.66 59.66 11.17
200 15.45 53.71 22.69 22.22 63.75 63.75 12.56
250 17.04 58.84 24.57 23.32 66.68 66.68 13.95
300 19.74 62.60 28.40 24.88 72.72 72.72 16.74
350 20.72 68.64 32.20 31.96 116.86 116.86 22.06
400 21.49 74.84 34.06 38.06 133.21 133.21 22.33
Flue systems
MD plus range - twin wall flue (continued)For use with domestic boilers, warm air and water heaters (oil and gas)
• Plate, supports and brackets are manufactured from galvanised mild steel
Other products also availableBoiler adapter and Increaser
51Sales and product information is available at www.ventilationcentre.co.ukSizes are nominal unless shown otherwise. Prices exclude delivery and VAT. Subject to our terms and conditions of sale.
Flue systems
Øinches
Welded seamper metre
Triple lockper metre
4 22.61 23.72
5 22.61 23.72
6 35.08 41.78
7 62.67
8 71.01
9 119.10
10 138.95
12 158.80
14 178.65
16 198.49
Flue linerFor use with gas and 28 sec oil fired appliances
• Manufactured from 316 grade stainless steel single skin convoluted profile• FLT has a triple locked, roll and crimped seam for increased flexibility• Suitable for temperatures up to +260˚C• Conforms to BS715
Options• Double skin versions
Prices on request
Product Description Code Each
GC1
Ø 4” GC1-4 18.67
Ø 5” GC1-5 20.14
Ø 6” GC1-6 24.63
Ø 7” GC1-7 38.75
Ø 8” GC1-8 38.75
Aspiromatic
Ø 80-160mm AT-160 154.21
Ø 112-200mm AT-200 174.71
Ø 150-240mm AT-240 195.96
Terminals
• GC1 is manufactured from 1mm gauge aluminium• Aspiromatic is manufactured from 304 grade stainless steel
FLW/FLT
Sales and product information is available at www.ventilationcentre.co.ukSizes are nominal unless shown otherwise. Prices exclude delivery and VAT. Subject to our terms and conditions of sale. 52
Product DescriptionEPDM (black) Silicone (red)
Code Each Code Each
Standard
Ø 3-20mm M1-MINI 6.30
Ø 6-50mm M1-01 9.67 M2-01 14.93
Ø 32-76mm M1-02 12.73 M2-02 19.00
Ø 6-102mm M1-03 18.33 M2-03 26.50
Ø 76-152mm M1-04 22.25 M2-04 32.08
Ø 102-178mm M1-05 24.92 M2-05 37.58
Ø 127-228mm M1-06 29.00 M2-06 43.50
Ø 152-280mm M1-07 58.17 M2-07 87.58
Ø 178-330mm M1-08 64.42 M2-08 97.75
Ø 254-467mm M1-09 94.17 M2-09 141.92
Ø 330-660mm M1-MAXI 267.50 M2-MAXI 421.08
Retrofit
Ø 13-102mm RF1-01 31.14 RF2-01 47.23
Ø 102-235mm RF1-02 69.10 RF2-02 97.44
Ø 235-413mm RF1-03 76.65 RF2-03 115.92
Residential
Ø 76-203mm RES1-01 23.82 RES2-01 46.48
Ø 203-280mm RES1-02 42.11 RES2-02 77.91
Ø 280-457mm RES1-03 67.20 RES2-03 125.66
Fixing kit
Silicone sealant 310mlSelf-drilling screws (20)Magnetic chuck adapterTrimming knifeInstructions
MFK 10.97
Flashings
• Standard are for slide-over applications• Retrofit and Residential are for wrap-around applications• Residential features a built-in 20˚ angle• Temperature range: EPDM -55˚C to +100˚C, Silicone -74˚C to +225˚C
MasterflashFor use on all types of roofing surfaces - including; metal, plastic, tile and rubber membrane
53Sales and product information is available at www.ventilationcentre.co.ukSizes are nominal unless shown otherwise. Prices exclude delivery and VAT. Subject to our terms and conditions of sale.
FL RA RLR SMF SMC
Ømm
Flat bar flange
Rolled angle flange
Rapid-lock ring
Spiralmate
Flange ring Closure ring
80 7.44 11.47
100 7.77 12.28
125 9.39 12.93
150 11.91 13.75
160 12.62 14.67
180 12.82 15.58
200 13.40 15.87 2.75 5.73
224 14.76 16.80 3.03 5.45
250 15.54 16.87 2.98 5.85
280 19.94 3.10 5.95
300 21.10 19.89 18.15 3.15 6.03
315 21.17 19.89 19.07 3.25 6.03
355 22.59 22.73 20.42 3.40 6.28
400 24.07 24.15 3.73 6.33
450 27.89 28.41 3.78 7.88
500 28.22 32.67 5.30 8.40
560 35.34 35.52 6.08 9.65
630 39.67 44.04 6.40 9.73
710 41.01 9.80 13.23
800 42.60 11.53 15.20
900 62.98 12.60 15.80
1000 63.77 15.23 18.50
1120 78.05 17.15 20.15
1250 80.27 18.25 21.80
Flange systems
Circular flanges
• Flat bar flange has elongated screw holes
Ø mm W x T mm 80-125 25 x 3 150-250 30 x 4 280-500 35 x 5 560-1000 40 x 5 1120-1250 50 x 6
• Rolled angle flange is non-drilled
Ø mm W x H x T mm 300-630 40 x 40 x 3
• Rapid-lock ring has a toggled closure mechanism with an integral ring seal
• Spiralmate is suitable for ducts up to 1mm gauge Width of pocket can accommodate spiral lock A joint comprises of 2 SMF and 1 SMC
Sales and product information is available at www.ventilationcentre.co.ukSizes are nominal unless shown otherwise. Prices exclude delivery and VAT. Subject to our terms and conditions of sale. 54
Flange systems
Product Description Code Each Per boxBox
quantity
Flange section
20mm x 5m length EP120/11 7.90
30mm x 5m length EP130/11 10.25
40mm x 5m length EP140/11 18.10
Cornerpiece
20mm S20/12 0.23 37.38 200
20mm (long) S20/12L 0.26 43.69 200
30mm S30/12 0.42 34.89 100
40mm S40/12 1.08 45.10 50
Clips
Drive clip to suit all sizes EP13S 0.13 22.51 200
Snap clip to suit all sizes DS033 0.16 25.36 200
Clamp G-type clamp to suit all sizes DS204 0.42 69.07 200
Gasket
15mm x 6mm x 15m roll DS120 3.58 101.32 34
20mm x 6mm x 15m roll DS130 4.64 77.40 20
25mm x 6mm x 15m roll DS140 5.96 99.40 20
Doby flange systemSuitable for HVCA specification joint ratings up to J6 and pressure classes A, B and C
Product Description Code Each
Flange section
20mm x 5m length XL120 7.50
30mm x 5m length XL130 9.65
40mm x 5m length XL140 17.25
Xcel flangeFor joint ratings up to J4 and pressure classes A, B and C
For use with Doby flange system; corner piece, clips, clamp and gasket
• Doby and Xcel flange sections feature an integral pocket with permanently flexible non-toxic sealant• Tested and certified to BSRIA in accordance with HVCA test procedures DW/TM1• Conforms to specification DW144
55Sales and product information is available at www.ventilationcentre.co.ukSizes are nominal unless shown otherwise. Prices exclude delivery and VAT. Subject to our terms and conditions of sale.
Product Description Code Each Per boxBox
quantity
Flange section
20mm x 5m length DF20 8.85
30mm x 5m length (J3) DF30J3 11.70
30mm x 5m length (J4) DF30J4 13.35
45mm x 5m length DF45 26.55
Cornerpiece
20mm DC20 0.31 102.00 400
30mm DC30 0.53 108.75 250
45mm DC45 1.08 90.00 100
Metal cleat To suit all sizes DM 0.18 73.50 500
G-clamp To suit all sizes DG 0.47 76.50 200
Gasket
14mm x 6mm x 10m roll DT20 2.92 48.60 20
19mm x 6mm x 10m roll DT30 3.89 64.80 20
25mm x 6mm x 10m roll DT45 6.05 100.80 20
Ductmate flange systemSuitable for HVCA specification joint ratings up to J6 and pressure classes A, B and C
Flange systems
• Flange section features an integral pocket with permanently flexible non-toxic sealant• Tested and certified to BSRIA in accordance with HVCA test procedures DW/TM1• Conforms to specification DW144
Sales and product information is available at www.ventilationcentre.co.ukSizes are nominal unless shown otherwise. Prices exclude delivery and VAT. Subject to our terms and conditions of sale. 56
Ømm
Length (50mm insulation) Length (100mm insulation)
300mm 600mm 900mm 1200mm 300mm 600mm 900mm 1200mm
80 45.90 51.30 63.00 83.70
100 26.00 29.00 45.00 57.00 47.70 53.10 64.80 85.50
125 27.00 33.00 48.00 66.00 49.50 55.80 68.40 89.10
150 29.00 39.00 51.00 69.00 49.50 55.80 68.40 89.10
160 44.00 47.00 66.00 77.00 49.50 55.80 68.40 89.10
180 56.70 63.00 77.40 99.00
200 44.00 47.00 66.00 77.00 56.70 63.00 77.40 99.00
224 57.60 68.40 90.00 115.20
250 48.00 56.00 79.00 96.00 57.60 68.40 90.00 115.20
280 70.20 83.70 111.60 130.50
300 70.20 83.70 111.60 130.50
315 66.00 78.00 105.00 125.00 76.50 93.60 126.90 138.60
355 78.00 103.00 127.00 153.00 76.50 93.60 126.90 138.60
400 98.00 129.00 161.00 191.00 87.30 102.60 134.10 158.40
450 110.70 127.80 176.40 207.00
500 112.95 133.20 212.40 234.00
560 119.52 151.20 228.60 250.20
630 133.65 187.20 248.40 280.80
Acoustic & thermal
Circular silencersWithout baffle
• Manufactured from galvanised mild steel• Spigot connection• 1500pa maximum positive pressure
SIL50/SIL100
Order code example SIL50 150 300
(diameter) (length)
Options• Fully welded• Stainless steel construction• High pressure suitability• Weather proofing• Acoustic media density rating• Impervious membrane liner
Prices on request
Other products also availableBaffle type, and Square/rectangular silencers
57Sales and product information is available at www.ventilationcentre.co.ukSizes are nominal unless shown otherwise. Prices exclude delivery and VAT. Subject to our terms and conditions of sale.
Acoustic & thermal
Product Description Code Each
Acoustic foamplain
12mm x 2000mm x 1200mm AFP-12 19.53
25mm x 2000mm x 1200mm AFP-25 34.38
35mm x 2000mm x 1200mm AFP-35 45.65
50mm x 2000mm x 1200mm AFP-50 62.70
Acoustic foamself-adhesive
12mm x 2000mm x 1200mm AFA-12 41.25
25mm x 2000mm x 1200mm AFA-25 55.83
35mm x 2000mm x 1200mm AFA-35 67.65
50mm x 2000mm x 1200mm AFA-50 84.15
Duct wrap 25mm x 1200mm x 17m roll DW 85.41
Self-adhesivehanger
42mm length HG-42 0.16
63mm length HG-63 0.18
Adhesives
Liquid - 5 litres AL 48.00
Spray - 500ml AS 12.00
Phenolic stripcircular
25mm x 50mm x 1m (box/36) PSC-25X50 104.11
38mm x 50mm x 1m (box/30) PSC-38X50 100.85
50mm x 50mm x 1m (box/24) PSC-50X50 86.60
25mm x 75mm x 1m (box/24) PSC-25X75 106.87
38mm x 75mm x 1m (box/20) PSC-38X75 101.73
50mm x 75mm x 1m (box/16) PSC-50X75 89.27
Phenolic strip flat
25mm x 50mm x 1m (box/36) PSF-25X50 57.03
38mm x 50mm x 1m (box/30) PSF-38X50 64.42
50mm x 50mm x 1m (box/24) PSF-50X50 60.41
25mm x 75mm x 1m (box/24) PSF-25X75 54.92
38mm x 75mm x 1m (box/20) PSF-38X75 63.72
50mm x 75mm x 1m (box/16) PSF-50X75 61.11
Insulation materials
Other products also availableClass-O rated Acoustic foam and Duct wrap
• Acoustic foam is manufactured from flexible polyether in grey
23-25kg/m3 density Temperature range: -30˚C to +75˚C Thermal conductivity: 0.036w/mk Conforms to BS4735
• Duct wrap is manufactured from fibre glass insulation with a reinforced aluminium facing
24kg/m3 density Temperature range: +2˚C to +125˚C Conforms to BS476 part 7, class 1
• Liquid adhesive is composed of natural rubber in a blend of solvents
Temperature range: -30˚C to +65˚C Conforms to BS476, part 6 and 7 Class-O rated
• Phenolic strip is manufactured from high density structural phenolic foam with a reinforced aluminium foil barrier
60kg/m3 density Temperature range: -185˚C to +120˚C Thermal conductivity: 0.025w/mk Conforms to BS476 part 5, 6 and 7 Class-O rated
• Spray adhesive is composed of synthetic rubber/resin Application temperature: +5˚C to +40˚C
Sales and product information is available at www.ventilationcentre.co.ukSizes are nominal unless shown otherwise. Prices exclude delivery and VAT. Subject to our terms and conditions of sale. 58
Ømm
NCA fire damper BSB fire damper Tri-pro damperStandard
Resettable fire damper
Twin bladefire damperStandard case Hevac frame Standard case Hevac frame
80 40.87 66.34 44.63 68.90
100 40.87 66.34 44.63 68.90 63.13 58.93 39.04
125 42.64 67.91 45.55 69.91 64.56 60.25 43.27
150 42.64 67.91 46.51 70.79 67.36 63.45 46.27
160 44.41 69.70 47.19 71.51 70.04 63.78
180 44.41 69.70 47.68 72.11
200 44.41 69.70 48.27 72.48 74.43 66.53 66.01
224 45.99 74.42 49.28 74.22
250 45.99 74.42 50.15 76.87 108.69 77.05
280 48.19 76.80 51.28 78.43
300 48.19 76.80 52.35 81.61 137.85 103.95
315 53.52 86.47 54.09 82.52 148.44 103.95
355 53.52 86.47 57.98 87.24
400 54.69 90.62 59.42 91.10 108.58
450 58.62 96.73 63.28 102.26
500 68.71 109.18 73.98 118.61
560 88.24 134.04 82.49 127.53
630 94.96 143.12 97.55 148.28
710 118.24 170.95 126.65 186.52
800 123.77 179.05 132.71 195.46
900 163.85 224.05 174.99 245.19
1000 181.43 246.36 193.76 267.44
Fire dampers
Circular fire dampers
OptionsFor NCA & BSB fire dampers
• Dry wall/partition frame• Fusible link ratings• Sensors and controls• Material types and combinations
For Tri-pro damper
• Motorisation• With plate
Prices on request
CGN CGH CGB CGF TPS MFD TWB
• NCA & BSB fire dampers have a galvanised mild steel case and blades
Curtain blades are outside of air-stream Spigot connection +72˚C fusible link Conforms to BS476 part 20
• Tri-pro is a fire damper which can be adapted for smoke and volume control
Allows blade to be reset, fusible link replaced and testing from outside the unit eliminating the need for access doors Conforms to BS476 parts 20-22
• Twin blade fire damper is suitable for slide-in installations
Flame proof sealing ring Ultra-low pressure drop +72˚C fusible link
• Resettable fire damper is a single blade, 2 hour rated unit
Can be completely reset externally +72˚C fusible link
59Sales and product information is available at www.ventilationcentre.co.ukSizes are nominal unless shown otherwise. Prices exclude delivery and VAT. Subject to our terms and conditions of sale.
Fire dampers
Options• Fusible link ratings• Sensors and controls• Material types and combinations
Prices on request
• Galvanised mild steel case and blades• Curtain blades are outside of air-stream• Spigot connection• +72˚C fusible link• Conforms to BS476 part 20
Heightmm
Width mm
100 150 200 250 300 350 400 450 500 550
100 30.61 32.78 33.37 34.35 35.74 36.12 36.54 37.11 37.72 39.10
150 30.61 32.78 33.37 34.35 35.74 36.12 36.54 37.11 37.72 39.10
200 30.61 32.78 33.37 34.35 35.74 36.12 36.54 37.11 37.72 39.10
250 32.00 33.77 34.57 35.34 36.12 37.11 38.10 38.89 39.50 40.67
300 33.77 34.57 36.33 37.11 38.51 39.10 41.27 42.45 43.24 46.61
350 34.57 35.94 37.11 38.51 40.10 42.26 42.87 44.41 46.61 47.21
400 35.94 37.72 38.10 40.10 41.65 43.05 44.41 50.74 52.92 54.30
450 38.10 39.88 40.29 43.83 46.20 49.75 51.93 54.30 55.68 56.08
500 39.88 43.05 44.04 46.98 49.75 52.13 54.51 56.28 57.67 61.41
550 43.24 45.99 47.39 49.37 52.31 53.70 56.28 57.45 61.01 63.18
600 46.20 48.76 50.15 51.93 53.52 54.69 56.85 58.84 62.60 65.15
650 48.98 51.93 53.52 54.09 55.28 56.85 58.62 61.01 64.56 65.73
700 51.93 54.30 56.28 56.67 57.26 58.62 59.83 63.77 65.73 67.72
750 53.91 56.28 58.84 60.41 61.22 62.78 63.56 65.73 67.91 69.49
800 54.69 57.45 59.83 61.60 63.18 64.56 65.34 67.54 69.88 70.48
850 56.67 59.02 62.00 63.38 65.34 66.14 67.91 70.48 73.84 77.20
900 57.85 61.80 63.77 65.34 65.95 67.72 69.31 73.24 75.81 81.52
950 61.41 63.38 65.34 65.95 67.72 68.50 70.29 75.81 79.36 87.85
1000 63.38 65.34 66.34 67.54 68.89 70.09 72.26 77.40 83.30 90.40
Heightmm
Width mm
600 650 700 750 800 850 900 950 1000
100 41.47 42.87 43.65 45.03 45.99 48.76 53.30 54.51 56.67
150 41.47 42.87 43.65 45.03 45.99 48.76 53.30 54.51 56.67
200 41.47 42.87 43.65 45.03 45.99 48.76 53.30 54.51 56.67
250 43.05 44.04 45.03 46.98 48.19 49.97 53.91 54.89 56.85
300 47.21 48.98 49.56 52.13 54.09 55.49 56.67 58.25 58.84
350 49.75 53.91 54.69 57.26 58.62 60.22 61.41 63.96 65.73
400 56.28 57.45 58.84 61.60 63.38 65.15 66.34 69.11 70.48
450 57.45 63.38 65.55 67.72 69.70 70.66 72.26 75.02 78.58
500 64.96 65.55 66.93 69.70 70.48 75.02 78.37 83.30 88.45
550 65.73 66.14 68.11 70.09 74.64 78.58 83.70 88.84 90.62
600 67.72 70.29 71.08 74.82 78.58 85.89 88.45 93.78 99.31
650 69.49 72.06 74.82 79.57 85.89 87.66 93.38 99.31 101.27
700 70.66 74.82 78.58 84.51 87.66 93.57 98.32 100.28 104.83
750 74.64 77.59 83.52 87.85 92.79 95.76 100.10 104.42 109.97
800 77.20 81.75 86.08 90.62 94.96 99.88 104.03 109.56 113.52
850 81.34 86.08 90.22 97.72 104.83 107.20 111.53 114.30 117.07
900 85.68 90.03 94.56 102.45 107.40 109.97 114.30 116.66 119.84
950 88.84 93.57 99.31 106.80 110.15 111.53 117.27 119.84 122.78
1000 93.38 98.32 104.03 108.98 112.13 115.30 120.43 123.38 127.13
NCA fire damperStandard case
Order code example BGN 250 200
(width) (height)
BGN
Sales and product information is available at www.ventilationcentre.co.ukSizes are nominal unless shown otherwise. Prices exclude delivery and VAT. Subject to our terms and conditions of sale. 60
Fire dampers
Options• Dry wall/partition frame• Fusible link ratings• Sensors and controls• Material types and combinations
Prices on request
• Galvanised mild steel case and blades• Curtain blades are outside of air-stream• Spigot connection• +72˚C fusible link• Conforms to BS476 part 20
Heightmm
Width mm
100 150 200 250 300 350 400 450 500 550
100 56.28 58.25 58.62 61.80 64.37 66.34 68.50 70.66 72.64 76.42
150 56.28 58.25 58.62 61.80 64.37 66.34 68.50 70.66 72.64 76.42
200 56.28 58.25 58.62 61.80 64.37 66.34 68.50 70.66 72.64 76.42
250 57.45 59.02 59.83 63.38 65.73 68.71 70.66 73.43 75.61 78.19
300 59.02 59.83 61.60 66.14 69.11 71.47 75.21 77.97 80.16 85.08
350 59.83 61.22 62.60 68.71 71.88 75.21 77.78 80.35 84.30 86.47
400 61.22 62.99 63.38 71.08 74.23 77.20 79.96 87.85 91.61 94.56
450 65.55 68.71 70.66 75.81 79.75 85.08 88.06 92.39 95.34 97.14
500 68.11 72.86 74.82 79.96 84.11 88.06 91.99 95.34 98.32 103.66
550 72.64 77.20 79.57 83.30 87.85 90.62 94.56 97.72 90.44 106.19
600 76.19 80.16 83.52 86.85 89.83 92.39 96.14 99.69 104.83 108.98
650 80.16 84.11 87.66 89.83 92.39 95.34 98.92 103.04 107.78 110.56
700 83.70 87.66 91.22 92.79 95.55 98.32 99.69 106.80 109.97 113.30
750 86.85 90.82 95.15 98.11 100.49 103.43 106.01 109.36 113.12 116.07
800 88.45 92.99 96.93 100.28 103.04 106.01 108.19 111.94 116.07 118.45
850 91.40 95.55 99.88 102.86 106.01 108.38 111.94 116.29 120.82 125.55
900 94.16 98.92 103.04 105.82 107.78 111.14 114.50 119.84 123.77 131.27
950 98.32 101.66 104.83 107.20 110.76 112.73 116.29 123.18 128.70 138.39
1000 100.88 104.42 107.20 109.56 112.54 115.30 119.23 125.76 133.25 141.94
Heightmm
Width mm
600 650 700 750 800 850 900 950 1000
100 79.75 82.52 84.69 87.66 90.22 94.56 100.49 103.25 106.80
150 79.75 82.52 84.69 87.66 90.22 94.56 100.49 103.25 106.80
200 79.75 82.52 84.69 87.66 90.22 94.56 100.49 103.25 106.80
250 82.12 84.51 86.85 88.84 93.38 96.73 101.87 104.42 107.97
300 87.06 90.40 92.39 96.34 100.10 102.86 105.82 108.98 111.34
350 90.62 96.14 98.71 102.86 105.82 108.79 111.74 115.69 118.84
400 98.11 100.68 103.85 107.97 111.34 115.07 117.46 121.40 124.57
450 100.28 107.59 111.14 115.49 118.45 121.40 124.17 128.52 133.47
500 108.19 110.56 113.52 117.85 120.22 126.16 131.27 137.79 144.51
550 110.15 112.54 115.69 119.44 125.36 132.56 137.58 144.31 147.67
600 113.30 117.46 118.84 124.95 130.10 138.98 143.52 149.62 157.32
650 115.89 120.22 124.37 130.88 138.39 141.56 149.04 156.74 160.48
700 118.24 123.59 129.10 136.20 141.14 148.66 154.77 158.71 164.43
750 123.00 127.71 135.02 140.96 147.67 151.61 157.72 163.47 170.58
800 126.54 132.65 138.20 144.69 150.23 156.93 162.47 168.01 175.29
850 131.69 135.81 143.90 152.60 161.47 165.03 170.95 173.52 179.65
900 136.80 142.54 148.85 158.14 164.64 168.80 174.51 178.44 183.20
950 140.96 147.27 154.97 163.24 168.39 171.16 178.44 182.81 187.32
1000 146.28 152.78 160.30 168.01 170.95 176.28 182.99 187.14 192.08
NCA fire damperWith hevac frame
Order code example BGH 250 200
(width) (height)
BGH
61Sales and product information is available at www.ventilationcentre.co.ukSizes are nominal unless shown otherwise. Prices exclude delivery and VAT. Subject to our terms and conditions of sale.
Fire dampers
Options• Dry wall/partition frame• Fusible link ratings• Sensors and controls• Material types and combinations
Prices on request
• Galvanised mild steel case and blades• Curtain blades are outside of air-stream• Spigot connection• +72˚C fusible link• Conforms to BS476 part 20
Heightmm
Width mm
100 150 200 250 300 350 400 450 500 550
100 31.60 32.48 33.80 35.34 36.57 37.23 37.90 39.43 39.87 41.98
150 32.48 33.80 34.90 36.12 37.45 37.90 39.43 39.87 40.44 42.19
200 33.80 36.02 36.57 37.66 38.98 39.43 39.87 40.44 40.98 42.63
250 35.13 37.01 37.90 38.54 39.43 40.66 41.63 42.42 42.87 44.06
300 37.01 37.90 39.66 40.66 42.19 42.87 45.07 46.07 46.95 50.47
350 37.90 39.22 40.66 42.19 43.75 46.07 46.71 48.04 50.47 51.13
400 39.22 41.19 41.63 43.75 45.51 46.95 48.27 54.99 57.21 58.64
450 41.42 43.31 43.75 47.49 50.15 53.89 55.99 58.64 60.17 60.41
500 43.31 46.71 48.27 50.91 53.89 56.22 58.86 60.61 62.29 66.27
550 46.95 49.92 51.35 53.67 56.53 57.98 60.61 62.06 65.89 68.14
600 50.15 52.79 54.34 56.22 57.75 59.09 61.29 63.61 67.46 70.12
650 53.01 55.99 57.75 58.42 59.73 61.29 63.28 65.82 69.46 70.79
700 55.99 58.64 60.61 61.05 61.85 63.28 64.70 68.90 70.79 72.99
750 58.19 60.61 63.61 65.14 66.02 67.70 68.70 70.79 73.32 74.76
800 59.09 62.06 64.70 66.49 68.14 69.46 70.34 72.78 75.31 75.99
850 60.85 63.61 66.71 68.14 70.12 71.02 72.99 75.75 79.17 82.72
900 62.29 66.49 68.70 70.12 70.79 72.78 74.42 78.63 81.39 87.46
950 66.02 68.14 70.12 70.79 72.78 73.55 75.55 81.39 85.25 94.17
1000 68.14 70.12 71.34 72.55 73.98 75.31 77.75 83.04 89.34 96.94
Heightmm
Width mm
600 650 700 750 800 850 900 950 1000
100 42.63 44.39 45.07 46.71 47.49 51.57 52.35 55.99 56.53
150 44.39 45.07 46.71 47.49 48.04 51.92 55.99 57.21 59.73
200 45.07 46.51 47.26 48.71 49.92 52.57 57.44 58.64 60.85
250 46.71 47.70 48.93 50.91 52.13 53.89 57.98 59.09 61.05
300 51.13 53.01 53.57 56.22 58.42 59.73 60.85 62.62 63.38
350 53.89 58.19 59.09 61.85 63.28 64.70 66.02 68.90 70.56
400 60.61 62.06 63.61 66.49 68.34 69.90 71.34 74.20 75.75
450 62.06 68.34 70.56 72.99 74.99 75.99 77.75 80.51 84.25
500 69.90 70.56 72.11 74.99 75.99 80.51 84.03 89.34 94.97
550 70.79 71.34 73.55 75.55 80.29 84.25 89.89 95.41 97.17
600 72.99 75.75 76.63 80.51 84.47 91.98 94.97 100.59 106.44
650 74.76 77.75 80.51 85.69 92.21 93.97 100.03 106.44 108.64
700 76.19 80.51 84.47 90.89 94.17 100.26 105.22 107.56 112.29
750 80.29 83.48 89.89 94.74 99.82 102.58 107.32 111.97 117.61
800 83.04 87.90 92.42 97.38 102.04 107.11 111.53 117.37 121.68
850 87.24 92.21 96.73 104.68 112.29 114.72 119.49 122.22 125.33
900 91.77 96.39 101.26 109.75 114.97 117.61 122.22 124.89 128.32
950 95.41 100.26 106.44 114.28 117.81 119.49 125.55 128.32 131.39
1000 100.03 105.22 111.53 116.81 120.02 123.45 128.97 131.95 135.92
BSB fire damperStandard case
Order code example BGB 250 200
(width) (height)
BGB
Sales and product information is available at www.ventilationcentre.co.ukSizes are nominal unless shown otherwise. Prices exclude delivery and VAT. Subject to our terms and conditions of sale. 62
Fire dampers
Options• Dry wall/partition frame• Fusible link ratings• Sensors and controls• Material types and combinations
Prices on request
• Galvanised mild steel case and blades• Curtain blades are outside of air-stream• Spigot connection• +72˚C fusible link• Conforms to BS476 part 20
Heightmm
Width mm
100 150 200 250 300 350 400 450 500 550
100 57.68 58.45 59.94 61.53 65.19 65.97 66.65 73.14 73.70 78.28
150 58.45 59.94 60.98 62.20 66.18 66.65 68.26 76.19 76.63 80.98
200 59.94 62.20 62.66 66.43 67.79 68.26 68.71 76.63 79.85 84.06
250 61.30 63.13 64.14 67.33 68.26 69.49 70.54 78.72 81.77 85.52
300 63.13 64.14 65.97 69.49 73.60 74.28 76.54 82.48 88.50 92.12
350 64.14 65.50 66.87 70.99 75.18 77.59 78.28 84.52 92.12 92.81
400 65.50 67.55 68.01 72.67 77.00 78.48 82.24 91.78 99.06 100.54
450 67.79 69.71 70.18 76.54 81.77 85.66 90.18 95.55 102.14 102.36
500 77.11 80.63 82.24 84.97 88.04 90.40 98.27 102.58 104.30 108.39
550 80.88 83.93 85.52 87.82 90.77 92.25 100.10 104.05 107.92 110.32
600 91.78 94.51 96.11 98.06 99.64 101.22 105.88 108.15 112.13 114.88
650 94.74 97.81 99.64 100.31 101.68 103.26 107.92 110.44 114.19 115.65
700 97.81 100.54 102.58 103.03 103.84 105.32 109.31 113.73 115.65 117.92
750 102.58 105.11 108.15 109.88 110.68 112.36 115.89 118.06 120.54 122.15
800 103.61 106.56 109.31 111.13 112.82 114.19 117.61 120.10 125.10 125.90
850 105.32 108.15 111.35 112.82 114.88 115.89 120.33 123.06 129.10 132.84
900 109.19 113.61 115.89 117.23 118.06 120.10 121.81 128.63 131.36 137.72
950 113.03 115.21 117.23 118.06 120.10 120.78 125.33 131.36 135.35 144.65
1000 115.21 117.23 118.50 119.86 123.86 125.10 127.74 133.07 142.17 150.01
Heightmm
Width mm
600 650 700 750 800 850 900 950 1000
100 78.94 80.76 86.56 88.26 91.66 95.86 98.95 102.70 103.26
150 83.25 86.56 88.26 91.66 94.51 98.50 102.70 104.05 106.56
200 86.56 88.04 88.81 92.81 96.45 99.18 104.30 105.55 107.83
250 88.26 89.40 90.53 95.06 98.74 100.54 104.74 106.00 108.04
300 92.81 94.74 95.30 100.54 105.19 106.56 107.83 109.63 110.32
350 95.66 100.10 100.99 106.34 110.32 111.80 113.03 116.13 117.81
400 102.58 104.05 108.15 111.13 115.57 117.02 118.50 121.46 125.66
450 104.05 110.55 155.33 117.92 122.37 123.29 125.10 130.55 134.43
500 112.13 115.33 116.92 119.97 125.90 130.55 136.70 142.17 150.46
550 115.65 116.13 120.78 122.85 130.35 134.43 142.73 148.42 152.73
600 117.92 123.06 126.58 130.55 137.14 147.38 150.46 156.26 162.28
650 122.15 125.10 130.55 135.91 147.73 149.42 155.82 162.28 164.56
700 123.62 130.55 134.66 146.25 149.77 156.03 163.54 166.03 170.80
750 127.82 133.51 142.73 150.23 158.07 160.82 165.80 170.60 178.78
800 135.66 140.69 147.97 152.95 160.35 165.48 170.13 178.56 182.98
850 140.00 145.12 152.27 162.95 170.80 173.32 180.70 183.44 189.23
900 144.65 149.42 159.46 168.32 176.04 178.78 186.06 188.79 194.81
950 148.42 156.03 164.80 172.84 179.00 180.70 192.08 194.81 198.12
1000 155.82 161.03 172.51 177.98 181.14 187.30 195.47 198.57 202.65
BSB fire damperWith hevac frame
Order code example BGF 250 200
(width) (height)
BGF
63Sales and product information is available at www.ventilationcentre.co.ukSizes are nominal unless shown otherwise. Prices exclude delivery and VAT. Subject to our terms and conditions of sale.
Volume control dampers
Ømm
NCAdamper
BSBdamper
Irisdamper
80 39.00 43.85
100 39.00 43.85 36.20
125 44.52 47.63 39.12
150 44.52 51.37 42.02
160 51.80 52.92 42.02
180 51.80 54.49
200 51.80 56.59 49.23
224 57.59 59.39
250 57.59 62.16 76.01
280 63.13 70.58
300 63.13 70.58
315 73.24 73.49 99.80
355 73.24 79.36
400 79.18 85.63 172.28
450 86.73 93.57
500 92.80 102.91 274.02
560 107.76 116.16
630 122.87 131.40
710 140.41 148.15
800 152.01 171.35
900 177.35
1000 202.85
Circular volume control dampers
OptionsFor NCA & BSB dampers
• Side and edge seals• Extended spindle• Motorisation; see Belimo motors• Material types and combinations
Prices on request
• NCA & BSB dampers have a galvanised mild steel case and aluminium blades
Opposed multi-leaf blades Hand-locking quadrant control Spigot connection
• Iris damper has galvanised mild steel case and blades
Provides uniform airflow control Lockable control handle Spigot connection with gasket seal
Product Description Code Each
Belimomotors
Open/close - 24v ac/dc SM24 126.35
Open/close - 240v ac SM240 127.25
Spring return - 24v ac/dc AF24 230.19
Spring return - 240v ac AF230 263.90
MotorisationFor use with NCA and BSB dampers
IRDDBC
Sales and product information is available at www.ventilationcentre.co.ukSizes are nominal unless shown otherwise. Prices exclude delivery and VAT. Subject to our terms and conditions of sale. 64
Volume control dampers
Options• Side and edge seals• Spigot connection• Extended spindle• Motorisation; see Belimo motors on page 63• Material types and combinations
Prices on request
• Galvanised mild steel case and aluminium blades• Opposed multi-leaf blades• Hand-locking quadrant control
Heightmm
Width mm
100 150 200 250 300 350 400 450 500 550
100 29.69 31.02 31.02 33.70 33.70 38.14 38.14 39.64 40.81 40.81
150 33.70 33.70 36.65 38.14 38.14 40.81 40.81 42.45 42.45 43.93
200 38.14 38.14 39.32 40.81 40.81 43.93 43.93 45.55 45.55 46.74
250 40.81 40.81 42.31 43.78 43.78 46.74 46.74 49.86 49.86 52.68
300 43.78 43.78 44.81 47.78 47.78 52.68 52.68 54.01 54.01 55.65
350 49.86 49.86 52.68 54.01 54.01 55.65 55.65 57.86 58.46 58.46
400 54.01 54.01 55.65 57.14 57.14 58.46 59.96 59.96 64.69 64.69
450 57.14 57.14 59.96 59.96 59.96 64.69 64.69 65.73 67.53 68.85
500 59.96 59.96 64.40 65.73 67.53 67.53 68.85 70.48 70.48 71.65
550 65.73 65.73 67.53 68.85 70.19 70.19 71.65 73.31 76.42 77.45
600 68.85 68.85 70.19 71.65 73.31 76.42 77.45 77.45 78.93 80.57
650 72.26 74.04 77.01 78.20 79.98 81.32 82.20 82.79 84.13 84.13
700 77.01 78.20 79.98 81.32 82.79 84.13 88.88 91.69 91.69 93.18
750 79.81 81.32 82.79 84.13 88.88 93.18 94.67 94.67 96.28 97.49
800 82.79 84.13 88.88 93.18 94.67 96.28 97.49 99.10 102.24 105.04
850 89.33 92.43 95.70 97.18 98.52 99.99 103.12 105.94 107.58 109.19
900 94.08 94.08 97.18 99.99 103.12 105.94 107.58 109.19 113.36 114.83
950 97.93 99.41 104.01 104.01 108.61 110.10 114.69 115.74 120.63 122.10
1000 100.74 104.01 106.82 110.10 111.43 115.74 117.50 122.10 124.93 128.19
Heightmm
Width mm
600 650 700 750 800 850 900 950 1000
100 42.45 42.89 44.37 44.37 46.00 46.44 47.49 50.61 50.61
150 45.55 46.00 46.00 47.20 50.30 50.61 53.57 53.57 55.21
200 49.86 50.30 53.11 53.11 54.61 55.21 56.68 56.68 58.31
250 52.68 54.61 56.24 56.24 57.86 58.31 59.51 59.51 61.14
300 55.65 57.86 59.05 59.05 60.54 65.73 65.73 65.73 67.05
350 59.96 60.54 65.14 65.14 66.32 68.56 70.33 70.33 71.65
400 65.73 68.12 68.12 69.44 71.07 71.65 73.02 73.02 74.49
450 68.85 71.07 72.26 72.26 74.04 77.74 77.74 78.93 80.57
500 73.31 74.04 77.01 78.20 79.98 80.57 82.06 83.39 83.39
550 77.45 79.98 81.32 82.79 82.79 85.02 89.62 92.43 92.43
600 81.77 84.13 88.88 91.69 91.69 94.08 95.70 96.89 98.52
650 91.69 93.18 93.18 94.67 97.49 101.64 101.64 103.12 106.08
700 94.67 95.99 97.49 99.10 101.95 105.94 107.58 109.19 113.36
750 99.10 100.60 102.24 106.52 108.16 113.36 114.83 116.17 119.44
800 106.52 108.16 112.45 113.80 115.29 119.44 120.78 123.89 127.16
850 113.36 114.83 116.17 121.07 123.89 125.36 128.49 129.97 131.32
900 119.44 121.07 125.36 127.16 128.19 130.51 134.42 135.90 140.36
950 126.69 128.19 130.99 132.78 135.61 138.41 140.49 144.66 146.28
1000 129.82 132.78 137.09 138.72 143.02 144.66 149.11 150.74 153.86
NCA volume control damperFlange connection
Order code example BA 250 200
(width) (height)
BA
65Sales and product information is available at www.ventilationcentre.co.ukSizes are nominal unless shown otherwise. Prices exclude delivery and VAT. Subject to our terms and conditions of sale.
Volume control dampers
Options• Side and edge seals• Spigot connection• Extended spindle• Motorisation; see Belimo motors on page 63 • Material types and combinations
Prices on request
• Galvanised mild steel case and aluminium blades• Opposed multi-leaf blades• Hand-locking quadrant control
Heightmm
Width mm
100 150 200 250 300 350 400 450 500 550
100 35.22 36.33 37.41 38.19 40.24 41.77 43.08 44.39 45.04 46.91
150 40.37 41.46 42.32 43.75 44.72 45.60 46.36 48.22 49.62 51.27
200 44.39 45.38 45.81 48.10 48.65 49.53 51.80 52.46 53.23 54.31
250 48.10 48.53 49.41 50.27 52.78 53.99 55.53 56.28 57.26 59.44
300 52.13 53.54 54.64 56.06 57.02 57.37 58.25 61.06 62.94 63.91
350 56.58 57.45 60.01 60.66 61.65 64.06 64.95 65.95 67.26 69.14
400 63.09 64.31 64.95 65.95 66.71 68.03 69.25 70.90 72.55 74.19
450 68.82 69.78 70.58 71.66 72.66 73.43 74.65 75.52 76.42 78.73
500 71.45 72.21 73.09 73.76 75.74 77.93 78.82 81.47 83.11 84.88
550 75.52 76.62 77.72 78.61 79.71 83.01 84.88 85.87 87.85 89.38
600 81.55 82.44 83.78 84.68 85.89 88.77 90.10 92.34 94.10 95.78
650 87.77 88.77 90.01 91.10 92.22 93.55 94.87 96.21 98.54 100.45
700 92.77 94.00 95.34 96.44 97.78 98.67 100.21 102.67 105.20 106.89
750 95.55 96.79 97.66 98.67 100.99 103.44 105.77 107.77 110.32 112.43
800 99.78 100.88 102.12 103.44 104.55 106.12 109.10 113.32 116.31 119.54
850 106.31 107.76 108.98 110.46 111.79 113.14 117.84 119.64 123.57 126.93
900 111.91 113.47 114.83 116.28 117.51 118.86 123.57 124.92 129.85 131.86
950 117.51 119.20 120.65 122.33 123.57 127.16 129.08 130.97 135.35 137.36
1000 123.12 124.34 125.70 128.62 131.42 134.56 137.24 140.28 143.08 146.33
Heightmm
Width mm
600 650 700 750 800 850 900 950 1000
100 48.99 50.35 51.69 52.91 54.11 55.73 57.10 58.31 59.56
150 52.78 54.55 55.78 57.11 58.24 59.88 61.58 62.35 63.69
200 57.23 58.78 60.23 61.13 62.46 64.71 65.71 66.95 68.08
250 61.45 62.23 64.34 65.45 67.01 68.62 69.99 71.09 72.21
300 65.68 67.13 69.13 70.46 71.21 73.00 74.69 75.80 77.28
350 71.12 73.00 73.91 75.12 76.57 78.37 79.50 80.86 82.41
400 76.23 77.11 78.45 80.10 81.23 83.08 84.65 86.13 87.70
450 80.89 82.44 84.01 85.11 86.68 89.27 90.83 92.18 93.93
500 87.00 88.56 90.01 91.54 92.87 95.88 97.66 99.02 100.70
550 91.67 93.88 95.12 97.00 98.67 100.66 103.39 105.06 106.52
600 97.45 98.79 100.99 103.44 104.99 107.66 109.56 111.25 113.26
650 102.21 104.89 108.00 109.77 111.65 114.83 116.73 118.19 120.31
700 108.11 111.11 113.88 114.99 117.76 121.43 123.79 125.91 128.38
750 114.99 117.09 119.54 121.76 124.10 127.38 130.07 132.33 133.65
800 121.32 123.88 126.65 129.33 131.77 135.35 138.59 140.40 142.63
850 129.63 132.09 133.54 136.44 139.38 141.97 145.76 148.12 150.58
900 134.67 137.14 140.16 143.08 145.88 149.01 152.04 154.17 157.21
950 141.97 143.42 148.46 149.35 151.72 155.76 158.77 161.36 164.25
1000 148.89 151.72 154.74 157.54 160.67 163.60 166.39 169.53 172.46
BSB volume control damperFlange connection
Order code example DD 250 200
(width) (height)
DD
Sales and product information is available at www.ventilationcentre.co.ukSizes are nominal unless shown otherwise. Prices exclude delivery and VAT. Subject to our terms and conditions of sale. 66
Fire blocks
Heightmm
Width mm
150 200 250 300 350 400 450 500 550 600
150 23.40 28.20 32.20 35.50 38.80 41.70 46.20 50.80 57.30 63.50
200 33.00 35.90 38.50 41.20 45.80 50.70 57.30 64.70 73.00
250 38.90 41.60 44.60 49.90 56.10 64.30 71.60 80.90
300 42.60 49.30 56.60 63.70 71.80 81.00 90.20
350 55.00 63.70 69.40 80.50 90.20 99.40
400 71.20 80.10 90.20 99.40 108.70
450 87.90 98.40 108.70 119.70
500 108.20 120.80 129.60
550 129.60 141.10
600 152.70
Circular type
Ø mm
80 100 125 150 160 200 250 300
25.74 25.74 25.74 25.74 36.30 36.30 42.80 48.18
2 hour rated
Heightmm
Width mm
150 200 250 300 350 400 450 500 550 600
150 27.30 32.90 37.60 41.40 44.70 48.50 53.40 59.30 66.70 75.00
200 38.40 41.80 44.70 48.10 52.60 58.60 66.10 74.50 83.60
250 45.30 47.50 52.00 58.00 65.40 74.10 83.50 93.90
300 49.23 57.70 65.30 74.20 84.00 93.00 103.30
350 64.10 72.90 80.30 92.40 101.90 114.30
400 82.20 92.30 100.50 113.90 125.80
450 102.10 113.60 125.50 142.20
500 124.60 137.60 150.20
550 149.10 163.00
600 169.50
Intumescent fire blocks1 hour rated, 30mm block thickness
Order code example IFQ1 250 200
(width) (height)
IFQ1
IFQ2
IFC1
• Graphite based honeycomb body with external zintec outer frame• Conforms to BS476 part 22, clause 5
Sales and product information is available at www.ventilationcentre.co.ukSizes are nominal unless shown otherwise. Prices exclude delivery and VAT. Subject to our terms and conditions of sale.
W x H x Linches
Pockets EU3/G3 EU4/G4 EU5/F5 Pockets EU6/F6 EU7/F7 EU8/F8
12 x 24 x 12 2 20.33 20.33 3 23.75 27.66 28.31
12 x 24 x 15 2 21.55 21.55 3 25.62 28.31 29.63
12 x 24 x 20 2 23.77 23.77 3 29.65 31.35 32.95
12 x 24 x 24 2 25.37 25.37 3 30.70 32.03 34.40
12 x 24 x 12 3 22.37 22.37 22.70 4 27.17 30.14 31.71
12 x 24 x 15 3 24.82 24.82 24.99 4 29.90 31.69 33.47
12 x 24 x 20 3 28.18 28.18 28.58 4 33.26 34.00 37.88
12 x 24 x 24 3 30.60 30.60 30.70 4 36.04 36.79 39.82
20 x 24 x 12 3 23.21 23.21 5 33.35 34.00 34.88
20 x 24 x 15 3 25.01 25.01 5 35.55 35.99 37.09
20 x 24 x 20 3 28.37 28.37 5 38.20 39.31 42.61
20 x 24 x 24 3 30.79 30.79 5 39.96 41.06 45.02
20 x 24 x 12 5 28.88 28.88 32.03 6 36.79 37.97 39.04
20 x 24 x 15 5 31.86 31.86 36.16 6 39.06 40.30 41.69
20 x 24 x 20 5 37.19 37.19 38.22 6 44.48 44.31 48.30
20 x 24 x 24 5 41.37 41.37 42.42 6 49.54 46.43 51.20
24 x 24 x 12 4 26.27 26.27 6 36.79 37.97 39.04
24 x 24 x 15 4 28.46 28.46 6 40.74 40.30 41.69
24 x 24 x 20 4 32.95 32.95 6 44.48 44.31 48.30
24 x 24 x 24 4 36.14 36.14 6 49.54 46.43 51.20
24 x 24 x 12 6 31.42 31.42 30.45 8 44.58 48.36 49.81
24 x 24 x 15 6 35.05 35.05 33.79 8 48.36 51.64 53.09
24 x 24 x 20 6 41.77 41.77 40.95 8 56.05 57.81 61.99
24 x 24 x 24 6 46.58 46.58 45.57 8 61.49 63.44 69.05
Filters & casings
High efficiency bag filters20mm header frame
• Media is composed of thermal bonded, resin free synthetic fibres• Pockets form a U-profile at the air entry face• Suitable for temperatures up to +100˚C• 100% rh (maximum humidity)
Order code example BF3 2 12 24 12
(pockets) (width) (height) (length)
Options• 22mm, 25mm or 30mm header frame
Prices on request
Other products also availableHEPA filters, Activated carbon filters and Filter media
BF3 BF4 BF5 BF6 BF7 BF8
67
Sales and product information is available at www.ventilationcentre.co.ukSizes are nominal unless shown otherwise. Prices exclude delivery and VAT. Subject to our terms and conditions of sale. 68
Filters & casings
W x Hinches
Glass fibre (EU3/G3) Pleated (EU4/G4) Impregnated carbon (EU4/G4)
2” thick 4” thick 2” thick 4” thick 2” thick 4” thick
10 x 10 4.50 8.33 7.17 11.70 8.16 16.26
10 x 20 6.30 11.70 8.31 14.04 10.32 21.09
12 x 12 5.09 9.45 7.17 11.94 8.88 18.60
15 x 15 7.38 13.64 9.66 14.70 12.42 22.59
15 x 20 7.47 13.82 8.70 14.10 11.46 22.59
16 x 16 7.52 13.95 9.06 14.10 11.70 23.10
16 x 20 7.52 13.95 9.06 14.10 11.70 23.10
16 x 25 8.37 15.48 10.74 18.30 15.27 30.03
18 x 18 7.61 14.09 10.32 16.20 14.34 24.12
20 x 20 8.01 14.81 10.26 17.40 14.28 28.05
20 x 25 9.09 16.83 11.28 18.90 16.21 32.25
24 x 12 7.38 13.73 9.15 14.25 12.54 21.81
24 x 20 8.46 15.66 12.15 19.86 15.30 27.00
24 x 24 9.45 17.10 12.15 19.86 18.93 36.60
Air filtersDisposable panels
• GP has a progressive density bonded media coated with continuously spun glass filaments
750 micron cardboard frame Suitable for temperatures up to +66˚C 80% rh (maximum humidity)
Order code example GP 10 20 2
(width) (height) (thickness)
• PP media consists of reinforced non-woven fibres bonded to an expanded metal support grid
750 micron cardboard frame Suitable for temperatures up to +100˚C 80% rh (maximum humidity)
• ICP media is of dual layer construction which comprises pleated EU4/G4 media supported by an expanded metal mesh, in contact with a thermal bonded synthetic base material impregnated with activated carbon
750 micron cardboard frame Suitable for temperatures up to +40˚C 80% rh (maximum humidity)
GP PP ICP
Product Description Code Each
Filtercassette
Ø 100mm FLC-100 42.50
Ø 125mm FLC-125 43.89
Ø 150mm FLC-150 47.14
Ø 160mm FLC-160 47.14
Ø 200mm FLC-200 52.09
Ø 250mm FLC-250 59.00
Ø 315mm FLC-315 74.47
Ø 400mm FLC-400 108.50
Casings
• Manufactured from galvanised mild steel with a snap-on lid• Spigot connection with rubber gasket• Includes EU3/G3 filter media
Replacement filter media is availablePrices on request
69Sales and product information is available at www.ventilationcentre.co.ukSizes are nominal unless shown otherwise. Prices exclude delivery and VAT. Subject to our terms and conditions of sale.
Filters & casings
W x Hinches
Economy Super Stainless
1” thick 2” thick 1” thick 2” thick 1” thick 2” thick
10 x 10 16.13 16.45 27.52 28.79 30.76 35.84
10 x 16 16.53 17.07 33.48 35.73 41.80 50.80
10 x 20 16.80 17.48 35.46 38.24 46.93 58.16
10 x 25 17.16 17.99 37.89 41.35 53.30 67.34
12 x 10 16.26 16.67 31.54 33.21 36.76 43.51
12 x 12 16.42 16.91 29.47 31.25 35.84 43.13
12 x 16 16.74 17.39 35.05 37.73 45.90 56.70
12 x 20 17.10 17.88 37.41 40.75 52.06 65.54
12 x 25 17.50 18.47 40.32 44.48 59.71 76.56
15 x 15 16.96 17.72 36.67 39.78 50.12 62.79
16 x 16 17.18 18.04 34.35 37.53 48.60 61.54
16 x 20 17.64 18.69 41.26 45.72 62.19 80.14
16 x 25 18.18 19.53 45.15 50.71 72.36 94.81
18 x 16 17.43 18.36 38.16 43.69 58.09 68.37
18 x 18 17.66 18.72 37.32 41.37 56.43 72.78
20 x 20 18.18 19.53 40.67 45.67 72.42 94.88
20 x 25 18.88 20.52 50.04 57.01 85.14 113.24
24 x 24 19.39 21.31 48.42 55.62 85.43 114.59
Washable panels - baffle type
W x Hinches
Aluminium Stainless Fire fighter
2” thick 2” thick 2” thick
10 x 16 35.26 54.57 93.30
10 x 20 25.83 55.67
10 x 25 28.00 56.74
12 x 16 28.00 57.45 83.27
12 x 20 28.00 58.52
12 x 25 30.49 61.05
16 x 16 27.64 61.05 103.45
16 x 20 28.00 63.57 108.22
16 x 25 25.11 72.90 128.05
20 x 16 28.71 63.57 108.22
20 x 20 28.71 66.42 122.93
20 x 25 32.31 78.28 144.62
25 x 16 31.59 72.90
25 x 20 32.31 77.21
Grease filtersWashable panels - mesh type
Order code example E 10 20 1
(width) (height) (thickness)
E SP SS
FA FS FF
• Mesh types are constructed from multiple layers of foil mesh, inlaid within a support frame
E - aluminium foil media and tin plate frame SP - aluminium foil media and frame SS - stainless steel foil media and frame
Media conforms to BS476 part 7 Filters can also be used for dust and mist filtration
• Baffle types have a seamless surface area for constant grease-run into drip tray
Mesh-free construction for easy cleaning Drop handles are included
Fire fighter has a heavy duty, welded stainless steel construction - provides positive flame barrier protection
OptionsFor mesh types
• Drop handles
Prices on request
Sales and product information is available at www.ventilationcentre.co.ukSizes are nominal unless shown otherwise. Prices exclude delivery and VAT. Subject to our terms and conditions of sale. 70
Filters & casings
W x H x L mm Each
1000 x 500 x 2000 897.53
1000 x 500 x 2500 999.14
1000 x 500 x 3000 1,064.06
1000 x 500 x 3500 1,202.36
1000 x 500 x 4000 1,309.60
1000 x 500 x 4500 1,419.68
1000 x 500 x 5000 1,470.48
1200 x 600 x 2000 951.16
1200 x 600 x 2500 1,145.91
1200 x 600 x 3000 1,320.89
1200 x 600 x 3500 1,387.22
1200 x 600 x 4000 1,509.99
1200 x 600 x 4500 1,557.98
1200 x 600 x 5000 1,608.77
Kitchen canopyFor wall mounting
KCW
• Manufactured from 0.9mm thick 304 grade stainless steel• DP1 240 grit outside finish, 2B inside finish• 80 micron PVC protective outer coating; for removal prior to use• Intergrated filter bank positioned at 30˚ to the vertical to eliminate grease drip• Removable grease drip tray• Fully welded corners to prevent leakage
Please specify size and quantity of grease filters when ordering (grease filters are not included)
Check accessibility prior to ordering
Options• Material types• Specific sizes
Prices on request
Other products also availableIsland canopy and Modular canopy
Product Description Code Each
Soakingtank
150mm x 635mm x 660mm10.5 gallon capacity
ST 110.88
Cleaningcrystals
10kg - sufficient to make 100 gallons of degreasant
CLC 35.28
Cleaning systemFor grease filters
• Soaking tank is manufactured from 16 gauge mild steel, zinc-plated• Cleaning crystals are non-toxic and non-corrosive
Sales and product information is available at www.ventilationcentre.co.ukSizes are nominal unless shown otherwise. Prices exclude delivery and VAT. Subject to our terms and conditions of sale.
Product Description Code Each
Fixing plate Fits to SUR FP 0.59
Extensionbracket
Fits to SPR XB 0.39
T-barbracket
300mm length TBB 4.09
Fixingband
0.9mm x 25mm x 25m coil FB40 15.50
Ømm
Suspensionring
Split ringbracket
Saddlebracket
80 2.92 3.44 2.10
100 2.98 3.50 2.16
125 3.48 4.09 2.46
150 3.52 4.14 2.57
160 3.62 4.26 3.03
180 3.67 4.32 3.03
200 3.97 4.67 3.39
224 4.17 4.90 3.68
250 4.36 5.13 3.91
280 5.78 4.09
300 5.11 6.01 4.20
315 5.16 6.07 4.32
355 6.77 4.56
400 7.36 4.79
450 7.82 5.02
500 8.17 5.26
560 8.52 5.54
630 8.81 5.83
710 9.25
800 10.64
Supports & fixings
Support brackets
• SUR is manufactured from 25mm x 1.5mm mild steel with an M8/M10 coupling nut, zinc-plated• SPR/SB/XB are manufactured from 25mm x 3mm mild steel flat bar, bright zinc-plated• FP is manufactured from 25mm x 2mm mild steel with an M8/M10 coupling nut, zinc-plated• TBB is manufactured from 25mm x 3mm mild steel flat bar and angle, bright zinc-plated• FB40 is manufactured from galvanised mild steel
SPR SB
Support bracket accessories
71
SUR
Sales and product information is available at www.ventilationcentre.co.ukSizes are nominal unless shown otherwise. Prices exclude delivery and VAT. Subject to our terms and conditions of sale. 72
Product Description Code Each
Slottedchannel
2.5mm x 41mm x 21mm x 3m length SCH-41X21 13.87
2.5mm x 41mm x 41mm x 3m length SCH-41X41 18.58
Back-to-backslottedchannel
2.5mm x 41mm x 21mm x 6m length SCHB-41X21 55.61
2.5mm x 41mm x 41mm x 6m length SCHB-41X41 78.08
PVCchannelend cap
41mm x 21mm CEC-41X21 0.26
41mm x 41mm CEC-41X41 0.31
Channel nutwith spring
M6 CNS-M6 0.46
M8 CNS-M8 0.46
M10 CNS-M10 0.48
Studding
M6 x 3m length STUD-M6 2.49
M8 x 3m length STUD-M8 3.05
M10 x 3m length STUD-M10 4.30
Studdingconnector
M6 STUDC-M6 0.46
M8 STUDC-M8 0.46
M10 STUDC-M10 0.83
Purlinclip
Suits M6, M8 and M10 D1 0.72
Beamclamp
Suits M6, M8 and M10 TK10 1.43
Cantileverarm
41mm x 41mm x 600mm length C600A 5.61
Supports & fixings
Channel support system
• SCH is galvanised mild steel, bright spangle finish• SCHB is mild steel, pre-zinc coated• CNS/STUD/STUDC/D1 are mild steel, bright zinc-plated• TK10 is mild steel, zinc-plated• C600A is mild steel, hot-dipped galvanised
Sales and product information is available at www.ventilationcentre.co.ukSizes are nominal unless shown otherwise. Prices exclude delivery and VAT. Subject to our terms and conditions of sale.
Supports & fixings
Channel brackets
M10 0.46 each0.07kg M8 0.46 each
0.95 each0.15kg 1.28 each0.22kg
2.50 each0.36kg 2.24 each0.23kg 2.86 each0.35kg
0.99 each0.15kg 1.51 each0.23kg 1.52 each0.24kg
2.47 each0.31kg 2.20 each0.31kg 3.07 each0.34kg
3.07 each0.345kg 3.83 each0.435kg 3.19 each0.31kg
2.03 each0.24kg 2.17 each0.25kg 2.18 each0.335kg
1.68 each0.29kg
0.95 each0.16kg
1.54 each0.24kg
3.07 each0.335kg
4.50 each0.42kg
3.18 each0.353kg
73
MSF501 MSF502 MSF503
MSF505 MSF506 MSF507
MSA601 MSA602 MSA603
MSA605 MSA606 MSA607
MSA609 MSA610 MSA611
MSA614 MSA615 MSA616
MSF504
MSA600
MSA604
MSA608
MSA612
MSA617
Sales and product information is available at www.ventilationcentre.co.ukSizes are nominal unless shown otherwise. Prices exclude delivery and VAT. Subject to our terms and conditions of sale. 74
Supports & fixings
Channel brackets (continued)
1.57 each0.18kg 1.84 each0.205kg 2.64 each0.285kg
2.62 each0.35kg
809 2.74 each 808 3.57 each
5.38 each0.645kg 9.41 each1.31kg
1.16 each0.12kg SWL = 270kg M10 4.43 each M10 2.03 each
2.37 each0.29kg
2.57 each0.3kg
5.38 each0.595kg
M10 3.29 each0.43kgSWL = 230kg
0.15kg SWL = 200kg
408 4.81 eachSWL = 220kg 407 3.83 each 404 4.39 each
0.37kg
0.32kg
0.47kg
A B404 43 43407 43 23408 43 84
406 3.69 eachSWL = 450kg 405 3.69 each
0.275kg
0.265kg
Bolt Ø405 10 x 150406 8 x 150
Mild steel, hot dipped galvanised
17.73 each1.92kg 13.63 each1.695kg
0.16kgSWG = 200kg
3.76 each0.53kg 0.42kg 3.50 each
807 4.53 each 806 5.47 each0.95kg
0.65kg 5.36 each0.725kg
MBC400
MSU804
MBC404
MBC407
MBC408
MSZ701 MSZ702 MSU800
MSU803MSU802MSU801
MSU805 MBP304
MBP308MBP307MBP306MBP305
MBC403MBC401
MSZ700
MSU808/9MSU806/7
MBC402
MBC405
MBC406
0.352kg 0.207kg
75Sales and product information is available at www.ventilationcentre.co.ukSizes are nominal unless shown otherwise. Prices exclude delivery and VAT. Subject to our terms and conditions of sale.
Supports & fixings
Size/SWL
Lengthm
Kits per bag
Code Code Thread CodeHolemm
Per bag
No 1
0-10kg0-22lbs
1 10 HF01-1M HF-SG-NO1-1M M6 HF-TG-NO1-1M 6 24.81
2 10 HF01-2M HF-SG-NO1-2M M6 HF-TG-NO1-2M 6 28.84
3 10 HF01-3M HF-SG-NO1-3M M6 HF-TG-NO1-3M 6 32.86
4 10 HF01-4M HF-SG-NO1-4M M6 HF-TG-NO1-4M 6 36.89
5 10 HF01-5M HF-SG-NO1-5M M6 HF-TG-NO1-5M 6 40.92
10 10 HF01-10M HF-SG-NO1-10M M6 HF-TG-NO1-10M 6 61.06
No 2
10-45kg22-100lbs
1 10 HF02-1M HF-SG-NO2-1M M6* HF-TG-NO2-1M 8 31.49
2 10 HF02-2M HF-SG-NO2-2M M6* HF-TG-NO2-2M 8 35.73
3 10 HF02-3M HF-SG-NO2-3M M6* HF-TG-NO2-3M 8 39.97
4 10 HF02-4M HF-SG-NO2-4M M6* HF-TG-NO2-4M 8 44.21
5 10 HF02-5M HF-SG-NO2-5M M6* HF-TG-NO2-5M 8 48.45
10 10 HF02-10M HF-SG-NO2-10M M6* HF-TG-NO2-10M 8 69.65
No 3
45-90kg100-200lbs
1 10 HF03-1M HF-SG-NO3-1M M6* HF-TG-NO3-1M 10 38.48
2 10 HF03-2M HF-SG-NO3-2M M6* HF-TG-NO3-2M 10 43.57
3 10 HF03-3M HF-SG-NO3-3M M6* HF-TG-NO3-3M 10 48.66
4 10 HF03-4M HF-SG-NO3-4M M6* HF-TG-NO3-4M 10 53.75
5 10 HF03-5M HF-SG-NO3-5M M6* HF-TG-NO3-5M 10 58.83
10 10 HF03-10M HF-SG-NO3-10M M6* HF-TG-NO3-10M 10 84.27
No 4
90-225kg200-495lbs
1 5 HF04-1M HF-SG-NO4-1M M10 39.17
2 5 HF04-2M HF-SG-NO4-2M M10 43.15
3 5 HF04-3M HF-SG-NO4-3M M10 47.12
4 5 HF04-4M HF-SG-NO4-4M M10 51.10
5 5 HF04-5M HF-SG-NO4-5M M10 55.07
10 2 HF04-10M HF-SG-NO4-10M M10 29.98
No 5
225-325kg495-715lbs
1 5 HF05-1M 52.74
2 5 HF05-2M 57.93
3 5 HF05-3M 63.13
4 5 HF05-4M 68.32
5 2 HF05-5M 29.41
10 2 HF05-10M 39.80
Gripple hangersWith a working load limit safety factor of 5:1
Loop-end
*M6 comes as standard, add 32p per kit for M8 and add M8 to ordering code
• Loop-end is for wrapping around a structure• Stud-end is for fixing into a concrete structure (kit includes non-drill anchor)• Toggle-end is for fitting to a pre-drilled hole
• Each kit comprises a rope sling (finished with either a Loop-end, Stud-end or Toggle-end) and a gripple to adjust the free end, together with a setting key
• Conforms to specification DW144• Wire rope conforms to BS EN 12385
Options• Double toggle-end for 2 hanging points• Stainless steel gripple for No 2 & 3 loop-end• 60 minute fire rated gripple• Non-standard rope lengths
Stud-end Toggle-end
Sales and product information is available at www.ventilationcentre.co.ukSizes are nominal unless shown otherwise. Prices exclude delivery and VAT. Subject to our terms and conditions of sale. 76
Product Description CodeUnit
quantityPerunit
No 3trapezefastener
One-way gripple for multi-tiered installations
For use with No 3 onlyGTF 10 18.02
Corner saddleSupports wire rope on rectangular ductwork
For use with No 1 to 3GCS 10 1.38
Pigtail bolt
M6 x 20mm - for use with No 1 to 3 PB-M6X20 10 4.88
M6 x 45mm - for use with No 1 to 3 PB-M6X45 10 4.88
M8 x 45mm - for use with No 1 to 3 PB-M8X45 10 6.05
Ceiling clip
19mm - for use with No 1 to 3 CC-19 10 4.88
32mm - for use with No 1 to 3 CC-32 10 4.88
Adapter
M6 - for use with No 1 to 3 A-M6 10 2.87
M8 - for use with No 1 to 4 A-M8 10 4.67
Spring clip
For fixing to suspended services with 6mm hole
For use with No 1 only
GSC 100 28.67
Wire anchor
Manufactured from high tensile stainless steel - fixes easily to concrete
For use with No 1 & 2
GWA 100 28.67
Tensioning tool For use with loop-end No 4 & 5 GTT 1 55.12
Wire ropecutter
For use with No 1 to 4 GRC 1 29.68
Setting key
Easy grip setting key for use with gripple hanger kits
For use with No 1 to 3 GSK3 1 1.66
For use with No 4 & 5 GSK5 1 1.66
Supports & fixings
Gripple accessories
77Sales and product information is available at www.ventilationcentre.co.ukSizes are nominal unless shown otherwise. Prices exclude delivery and VAT. Subject to our terms and conditions of sale.
Supports & fixings
Product Description CodeUnit
quantityPerunit
Protectivesleevetubing
Ø 2mm - for use with No 2 & 3 GST-2 25m coil 12.19
Ø 3mm - for use with No 2 & 3 GST-3 25m coil 18.02
Décor cover
For use with No 2 GDC2 10 2.34
For use with No 3 GDC3 10 2.34
No 1 ceilingfixing kit
Decorative ceiling fixing kit
For use with No 1GCK 10 11.03
TwisterFor securing tail wires
For use with No 2 & 3GT 100 5.52
Gripple accessories (continued)
Product Description CodeUnit
quantityPerunit
Hexagon headset screw
M6 x 13mm SS-M6X13 100 2.41
M6 x 25mm SS-M6X25 100 2.68
M8 x 25mm SS-M8X25 100 3.85
M10 x 25mm SS-M10X25 100 6.96
Hexagonfull nut
M6 FN-M6 100 0.52
M8 FN-M8 100 1.04
M10 FN-M10 100 2.30
Penny washer
M6 PW-M6 100 2.96
M8 PW-M8 100 2.96
M10 PW-M10 100 2.96
Springwasher
M6 SW-M6 100 0.58
M8 SW-M8 100 1.08
M10 SW-M10 100 1.78
Fixings
Sales and product information is available at www.ventilationcentre.co.ukSizes are nominal unless shown otherwise. Prices exclude delivery and VAT. Subject to our terms and conditions of sale. 78
Supports & fixings
Product Description CodeUnit
quantityPerunit
Roofing bolt & nut
M6 x 25mm RBN-M6X25 100 3.10
M8 x 25mm RBN-M8X25 100 7.53
Eye bolt
M6 EB-M6 1 1.88
M8 EB-M8 1 1.95
M10 EB-M10 1 2.30
Wedge nut
M6 WN-M6 100 28.13
M8 WN-M8 100 28.13
M10 WN-M10 100 28.13
Non-drillanchor
M8 x 30mm NDA-M8X30 100 13.51
M10 x 40mm NDA-M10X40 100 19.67
Coach screw
M6 x 20mm CS-M6X20 100 5.94
M6 x 40mm CS-M6X40 100 7.98
M8 x 25mm CS-M8X25 100 10.51
Self-tapping screw
#8 x 13mm STS-8X13 100 1.32
#10 x 13mm STS-10X13 100 1.78
Self-drillingsystem
#8 x 13mm screws SDS-8X13 1000 10.08
¼” magnetic chuck adapter MCA-1/4 1 5.60
#14 x 25mm screws SDS-14X25 100 4.05
5/16” magnetic chuck adapter MCA-5/16 1 5.60
Drill bit
1/8” DR-1/8 1 1.099/64” DR-9/64 1 1.155/32” DR-5/32 1 1.2711/64” DR-11/64 1 1.403/16” DR-3/16 1 1.5513/64” DR-13/64 1 1.711/4” DR-1/4 1 2.38
Rivet
3.2mm x 11mm 414 1000 16.10
4mm x 12.7mm 516 1000 21.35
4.8mm x 15mm 619 1000 25.38
Fixings (continued)
• Self-drilling screws are hardened steel, bright zinc-plated• Drill bit is high speed steel stub type• Rivet comprises of an aluminium head with steel mandrel
79Sales and product information is available at www.ventilationcentre.co.ukSizes are nominal unless shown otherwise. Prices exclude delivery and VAT. Subject to our terms and conditions of sale.
W x Hmm
Type A
Standard With chain With hinge
100 x 100 8.96 12.16 14.21
150 x 100 9.13 12.40 14.45
150 x 150 11.41 15.50 18.06
200 x 100 10.08 13.47 15.66
200 x 150 10.89 14.44 16.71
200 x 200 12.00 15.88 18.38
250 x 150 11.49 15.16 16.81
250 x 200 12.00 15.77 18.21
250 x 250 12.94 17.03 19.67
300 x 150 12.87 16.80 19.34
300 x 200 13.08 17.04 19.58
300 x 300 13.94 18.23 20.95
350 x 350 17.06 22.24 25.56
400 x 200 15.16 19.54 22.32
400 x 250 16.28 20.83 23.76
400 x 300 16.75 21.36 24.31
400 x 400 17.06 21.79 24.80
450 x 300 17.19 21.91 25.73
450 x 450 19.00 24.32 28.56
500 x 500 27.06 34.53 40.56
600 x 300 28.07 31.76 39.03
600 x 400 29.48 33.35 40.98
600 x 450 30.95 35.02 43.03
600 x 600 34.71 39.22 48.19
Product Description Code Each
Type B
Ø 80-125mm AB-200X80 11.35
Ø 150-450mm AB-250X150 11.35
Ø 400-1016mm AB-400X300 23.00
Type C
200mm x 80mm AC-200X80 11.35
250mm x 150mm AC-250X150 11.35
400mm x 300mm AC-400X300 23.00
Type D
233mm x 143mm AD-233X143 26.83
362mm x 227mm AD-362X227 30.06
494mm x 354mm AD-494X354 41.59
647mm x 496mm AD-647X496 68.48
Ancillaries
Access doorsDouble skin construction and gasket seal
AA
• Manufactured from galvanised mild steel• Type A is for flat, with a tabbed sub-frame and integral rockwood insulation• Type B is sandwich type for circular ducts• Type C is sandwich type for flat• Type D is for flat, with integral fire retardant insulation
Options• Type A are available in aluminium and stainless steel
Prices on request
AAC AAH
Sales and product information is available at www.ventilationcentre.co.ukSizes are nominal unless shown otherwise. Prices exclude delivery and VAT. Subject to our terms and conditions of sale. 80
Product Description Code Each
PVC tape 50mm x 33m roll TP-50 2.96
Cloth tape 50mm x 50m roll TC-50 4.40
Aluminiumfoil tape
50mm x 45m roll TA-50 4.64
100mm x 45m roll TA-100 9.28
Heat shrinktape
50mm x 30m roll THS-50 48.37
75mm x 30m roll THS-75 71.86
100mm x 30m roll THS-100 95.00
Solventedduct sealant
380ml cartridge 40-113 3.20
Acrylic duct sealant
310ml cartridge 40-317 2.83
Silicone duct sealant
310ml cartridge EVO-STIK 4.24
Cartridgegun
Suits 10” long cartridge CGN 6.20
Hardcast sealing system
Tape 90m roll DT5300 46.40
Adhesive 5 litres FTA20 53.65
Tape 27.5m roll & adhesive HSP 34.80
ExpandablePU foam
750ml canister EXF 8.18
Ancillaries
Tapes & sealants
• TP-50 is a flame retardant tape in grey Temperature range: -5˚C to +70˚C
• TC-50 is a polyethylene coated cloth tape in grey with a rubber blend adhesive
Temperature range: -10˚C to +60˚C
• TA-50/100 is a 30 micron aluminium foil tape with a high tack modified acrylic adhesive
Temperature range: -30˚C to +85˚C Conforms to BS476 parts 6 & 7 Class-O rated
• THS-50/75/100 is a cross linked high density tape with a thick layer of hot melt adhesive, which provides a tough, flexible air-tight seal
Temperature range: -30˚C to +65˚C Shrinkage temperature: +120˚C
• 40-113 is a high velocity solvented rubber based grey duct sealant, which is both waterproof and flame retardant Temperature range: -30˚C to +90˚C Conforms to DW144 and BS476 part 7 Class-O rated
• 40-317 is a non-flammable low/high velocity water borne acrylic polymer grey duct sealant which is both waterproof and flame retardant
Temperture range: -30˚C to +95˚C Conforms to DW144 and BS476 part 7 Class-O rated
• EVO-STIK is a high modulus one-part elastomeric sealant based on silicone polymers - available in translucent or aluminium
Temperature range: -65˚C to +180˚C Conforms to BS5889 type B
• Hardcast is a 2 part sealing system which comprisies of an impregnated woven fibre tape and a plastic type activator Non-toxic and non-flammable in both wet and dry states
Temperature range: -20˚C to +93˚C
• EXF is a self-curing, pre-polymer liquid polyurethane sealing foam
Temperature range: -40˚C to +90˚C Fire retardant type available Price on request
81Sales and product information is available at www.ventilationcentre.co.ukSizes are nominal unless shown otherwise. Prices exclude delivery and VAT. Subject to our terms and conditions of sale.
Ancillaries
W x H x Lmm
Weight kg Each
150 x 45 x 400 2.1 14.03150 x 45 x 500 2.6 15.78150 x 45 x 600 3.1 18.39150 x 45 x 700 3.7 21.03150 x 45 x 800 4.2 23.67150 x 45 x 900 4.7 25.42150 x 45 x 1000 5.1 28.05200 x 45 x 600 3.7 21.03200 x 45 x 700 4.2 23.67200 x 45 x 800 4.8 26.30200 x 45 x 900 5.3 28.94200 x 45 x 1000 5.9 31.54200 x 45 x 1100 7.1 35.93200 x 45 x 1200 7.7 40.32225 x 45 x 600 3.9 21.90225 x 45 x 700 4.5 24.54225 x 45 x 800 5.1 28.05225 x 45 x 900 5.7 30.65225 x 45 x 1000 6.2 34.18225 x 57 x 1100 7.5 37.68225 x 57 x 1200 8.1 42.93250 x 45 x 600 4.2 22.78250 x 45 x 700 4.8 26.30250 x 45 x 800 5.4 29.80250 x 45 x 900 6 33.29250 x 45 x 1000 6.6 36.80250 x 57 x 1100 7.9 40.32250 x 57 x 1200 8.6 46.43250 x 57 x 1500 10.5 55.19275 x 45 x 600 4.4 23.67275 x 45 x 700 5 28.05275 x 45 x 800 5.7 31.54275 x 45 x 900 6.3 35.04275 x 45 x 1000 7 38.57275 x 57 x 1100 8.3 42.93275 x 57 x 1200 9 48.20275 x 57 x 1500 11.1 57.83300 x 45 x 600 4.6 24.54300 x 45 x 700 5.3 28.94300 x 45 x 800 6 33.29300 x 45 x 900 6.7 36.80300 x 45 x 1000 7.4 40.32300 x 57 x 1100 8.7 45.57300 x 57 x 1200 9.4 50.82300 x 57 x 1500 11.6 62.22
O2A
• Manufactured from galvanised mild steel• Suitable for interior and exterior walkways, staircases, ramps, duckboards, scaffold planks, industrial floors, open mezzanines and ships grating• Conforms to BS4592 part 3, 1987
Options• O3 pattern panels• Stainless steel construction
Prices on request
Stair treadsACHIL O2
pattern panels
Sales and product information is available at www.ventilationcentre.co.ukSizes are nominal unless shown otherwise. Prices exclude delivery and VAT. Subject to our terms and conditions of sale. 82
Ancillaries
Product Description Code Each
Blast gatedamper
Ø 80mm BG-80 15.22
Ø 100mm BG-100 18.50
Ø 125mm BG-125 25.16
Ø 150mm BG-150 31.93
Ø 160mm BG-160 43.38
Ø 180mm BG-180 50.37
Ø 200mm BG-200 54.19
Ø 224mm BG-224 94.74
Ø 250mm BG-250 104.21
Ø 280mm BG-280 125.05
Ø 300mm BG-300 138.45
Ø 315mm BG-315 196.74
Ø 355mm BG-355 251.39
Dampercontrol set
Ø 150mm (max) DC18 5.60
Ø 300mm (max) DC15 7.84
Ø 710mm (max) DC12 14.04
Ø 1320mm (max) DC9 37.73
Toggle & hook
Size 25 TH25 0.77
Size 25 (aluminium) TH25A 1.50
Size 25 (316 grade stainless) TH25S 1.87
Size 33 TH33 2.70
Size 40 TH40 4.05
Fitchfastener
Zinc-plated mild steel F1 1.42
Mazac finish 60M 5.20
Bandingsystem
Band 9mm x 30m coil BD 20.99
Locks (box/50) LK 21.83
Hose clip
Ø 45-60mm HC-60 0.69
Ø 90-120mm HC-120 0.80
Ø 110-140mm HC-140 1.05
Ø 140-160mm HC-160 1.08
Ø 205-230mm HC-230 1.27
Ø 255-280mm HC-280 1.79
Ø 280-305mm HC-305 1.89
Ø 305-610mm HC-610 3.21
Flexible ductconnector
45-60-45mm x 25m coil FCP 46.88
45-75-45mm x 25m coil FCN 68.75
General products
• Blast gate damper has a die-cast aluminium body with a zinc-plated mild steel blade
Available with pneumatic control Prices on request
• Damper control set comprises; quadrant, handle, locking bolt and wing nut, quadrant and bearing end spindles and rear bearing
• Toggle and hook are mild steel, zinc-plated
• Banding system comprises continuously threaded stainless steel band with a one piece lock manufactured from hardened mild steel, zinc-plated
• Hose clip comprises 12.5mm wide threaded band and housing manufactured from aluzink pre-coated high strength steel Conforms to BS5315
HC610 are produced from banding system
• Flexible duct connector types:
FCP PVC coated polyester cloth Temperature range: -30˚C to +70˚C
FCN neoprene coated glass fibre cloth with a natural rubber blend adhesive Temperature range: -20˚C to +100˚C Conforms to BS476 part 7, class 1
83Sales and product information is available at www.ventilationcentre.co.ukSizes are nominal unless shown otherwise. Prices exclude delivery and VAT. Subject to our terms and conditions of sale.
Product Description Code Each
Louvreshutter
Ø 100mm WSK-100 6.99Ø 150mm WSK-150 13.39Ø 200mm WSK-200 17.47Ø 250mm WSK-250 17.98Ø 315mm WSK-315 19.25Ø 350mm WSK-350 20.81Ø 400mm WSK-400 22.82Ø 450mm WSK-450 29.77Ø 500mm WSK-500 34.55Ø 560mm WSK-560 59.42Ø 630mm WSK-630 71.66
Back draughtshutter
Ø 100mm BDS-100 16.14Ø 125mm BDS-125 17.43Ø 150mm BDS-150 22.84Ø 160mm BDS-160 22.84Ø 200mm BDS-200 25.38Ø 250mm BDS-250 34.69Ø 315mm BDS-315 41.19
Mesh guard
Ø 100mm MG-100 8.80Ø 125mm MG-125 9.72Ø 150mm MG-150 10.27Ø 160mm MG-160 10.73Ø 200mm MG-200 12.10Ø 250mm MG-250 15.65Ø 315mm MG-315 17.97Ø 355mm MG-355 22.53Ø 400mm MG-400 24.11
Turning vane& mounting
track
Vane 3m length VN 5.03Track 3m length TR 4.65
Splitter fixing Fastener & sealing washer (box/100) DS513 39.50
Test holecover
Ø 1/4” (pack/100) THC-1/4 24.60Ø 1/2” (pack/100) THC-1/2 27.68Ø 3/4” (pack/100) THC-3/4 30.75Ø 1” (pack/100) THC-1 46.13
Welded mesh
13mm x 13mm sq WM-13X13 122.7425mm x 13mm sq WM-25X13 89.7319mm x 19mm sq WM-19X19 78.3725mm x 25mm sq WM-25X25 64.20
Piano hinge
1½” open 15/16” closed, 1” long joint - mild steel 1607MS 10.311½” open 15/16” closed, 1” long joint - stainless steel 1607SS 39.162” open, 15/32” closed, 2” long joint - mild steel 1613MS 10.632” open, 15/32” closed, 2” long joint - stainless steel 1613SS 41.63
General products (continued)
• Louvre shutter is manufactured from durable polypropylene in grey
• Back draught shutter has a galvanised mild steel case with spring loaded aluminium blades
• Mesh guard is manufactured from mild steel wire bright zinc-plated 13mm x 13mm sq
• Turning vane and mounting track are manufactured from galvanised mild steel
• Splitter fixing is suitable for a material thickness of 1.2mm
• Welded mesh is manufactured from mild steel wire with a galvanised finish - 1.5mm thick x 1200mm wide x 6m roll
• Piano hinge has continuous non-drilled hinge manufactured from 16 gauge material with a 7 gauge hinge pin
Ancillaries
Terms & conditions of sale
1. DEFINITIONSIn these conditions:
“The Company” means Ventilation Centre Limited.
“The Buyer” means the persons, firm or company entering into the contract with the Company.
“The Conditions” means the conditions herein contained relating to the sale of the goods.
“The Contract” means the contract between the Company and the Buyer, created upon acceptance of the Buyer’s order.
“The Goods” means the goods supplied hereunder in accordance with the order.
“The Order” means the order placed by the Buyer, based on the Company’s quotation.
“The Quotation” means the quotation provided by the Company to the Buyer.
2. GENERAL
(a) Quotations for and acceptance of all orders are subject to these conditions and shall govern the contract to the exclusion of all other terms and conditions. The Buyer shall be deemed to have accepted these conditions on placing the order.
(b) No addition to or variation from these terms and conditions shall have effect unless the same are expressly accepted by the Company in writing under the hand of a director of the Company.
(c) The conditions represent the entire agreement and understanding of the parties and supersede any prior agreements, representations or undertakings.
3. PRICE
(a) The price for goods will be as provided in the quotation, and confirmed to the Buyer in the Company’s invoice.
(b) The Company reserves the right to vary from the price quoted to the extent that such variation is required to cover increases in the cost of supplying the goods betweenquotation and delivery to the Buyer. Prices at the date of delivery shall therefore prevail.
4. PAYMENT
(a) Payment shall be made within 30 days following the month of invoice unless otherwiseagreed and confirmed to the Buyer in the Company’s invoice.
(b) In the event of late or part-payment, interest at the rate of 5% above the Company’s bank base lending rate shall be charged on the sum outstanding on a daily basis until full payment is received.
(c) All prices quoted are exclusive of VAT, carriage, insurance, packing and all other duties, taxes or levies required to be paid under the contract.
5. DELIVERY
(a) The appointment of carriers is at the Company’s sole discretion unless the Buyerindicates a specific carrier prior to quotation.
(b) All reasonable efforts will be made by the Company to fulfil delivery dates provided that reasonable notice of such date is given by the Buyer. Time is not of the essence in the contract.
(c) The Company will consider repair or replacement of goods damaged or lost in transit where delivery is made by the Company’s carrier providing written notice of such damage or loss is provided within 3 days by the Buyer.
6. RISK AND PROPERTY
(a) Risk in the goods passes on delivery.
(b) Title in the goods will not pass to the Buyer until payment in full of the invoice.
(c) Where the Buyer sells goods on to a third party title will pass immediately before the goods are delivered to such third party.
(d) Where goods are attached to, or incorporated in other goods, or altered, title will not pass by virtue of such attachment or alteration, where the goods can be detached orremoved.
(e) The Buyer is required to store the goods supplied separately from any other goods in its possession until title has passed in accordance with sub-paragraphs (b) and (c) above.
(f) If the Buyer is overdue in payment for the goods or other goods supplied by theCompany, the Company may recover and sell the goods. The Company shall be entitled to take possession of the goods and is hereby granted licence to enter the Buyer’s premises for such purpose and may, if necessary, detach or remove the goods from other goods orequipment. This will not effect any other right the Company may have against the Buyer.
(g) Until payment for the goods and all other goods which are supplied under theseconditions:
(i) the Buyer shall hold the goods upon trust for the Company. (ii) if the goods are sold the Buyer shall hold the proceeds of sale on trust for the Company in a separate bank account specifically designated for this purpose. (iii) the Company reserves the right to trace the proceeds of sale received into any bank or other account which the Buyer maintains. (iv) if the goods are sold the Company may by written demand require an assignment of the Buyer’s right to recover the price from any third party.
(v) if the Buyer incorporates the goods into, or uses the goods for manufacture of other goods, before payment in full of the price, the Company shall be entitled to take possession of the new goods and is hereby granted a licence to enter the Buyer’s premises for the purpose of recovering the new goods. The Company shall be entitled to sell the new goods (subject to any third party rights therein) and shall retain from the proceeds of sale the amount outstanding to the Company for the goods and pay any balance remaining to the Buyer.
7. WARRANTY AND LIABILITY
(a) Subject to the conditions set out below, the Company warrants that the goods will be free from defects in material and workmanship for a period of 12 months from the date of delivery and shall replace any goods which the Buyer proves to the satisfaction of the Company to be faulty in accordance with this condition.
(b) The warranty given in paragraph (a) is subject to the following conditions.
(i) the Company shall be under no liability in respect of any defect in the goods arising from any specification of the Buyer provided in its order or any tender. (ii) the Company shall be under no liability in respect of any defect arising from fair wear and tear, wilful damage, negligence, abnormal working conditions, failure to follow the Company’s instructions, misuse or alteration or repair of the goods without the Company’s written approval. (iii) the Company shall be under no liability under the above warranty if the total price for the goods has not been paid by the due date for payment. (iv) the above warranty does not extend to parts, materials or equipment not manufactured by the Company, in respect of which the Buyer shall only be entitled to the benefit of any warranty or guarantee provided by the manufacturer thereof to the Company.
(c) Subject as expressly provided in these conditions, all warranties, conditions or other terms implied by statute or common law are expressly excluded to the extent permitted by law.
(d) Except in respect of death or personal injury caused by the Company’s negligence(or implied under the Consumer Safety Act 1987) the Company shall not be liable to the Buyer by reason of any representation, implied warranty, condition or other term or under the express terms of the contract for any consequential loss or damage (whether for loss of profit or otherwise), costs, expenses or other claims for consequential compensationwhatsoever arising out of the supply of goods and the Company’s liability for direct loss (otherwise than for death or personal injury) shall be limited to the value of the invoice for the contract.
8. STORAGE
The Company shall levy a storage charge to the Buyer for all goods stored by the Company within 1 month of the following;
(i) the Buyer failing to collect any goods from the Company’s premises following written notification of availability for collection;
(ii) the Buyer failing to take delivery of the goods or failing to make arrangements for delivery upon written notification of readiness for dispatch.
9. RETURNS/CANCELLATION
(a) The Company will not accept the return of any goods without its prior written consent.
(b) Where such consent is provided goods shall be returned at the Buyers expense.
(c) Credit for goods returned will be provided by the Company at the goods resale value, less a handling fee of 20%, provided that the goods are returned in a condition suitable for resale.
10. ALTERATIONS/MODIFICATIONS
The Company may make such alterations or modifications as it deems necessary to the goods or their manufacture without notice to the Buyer from time to time.
11. NOTICES
All notices to be given under the contract shall be given by prepaid first class post orfacsimile to the registered office or principal place of business of the party to be notifiedand shall be deemed to have been delivered if by letter at the expiration of 48 hours after posting and if by facsimile on receipt.
12. TERMINATION
Without prejudice to any other remedies the Company may have against the Buyer. The Company may terminate the contract on notice to the Buyer, upon the Buyer becoming bankrupt or insolvent or upon a resolution to wind up the Buyer being passed or a receiver, administrative receiver or administrator being appointed and shall be entitled to takepossession of all goods supplied and unpaid for, in accordance with paragraph 6 hereof.
13. FORCE MAJEURE
The Company shall be entitled to cancel the contract or reduce the quantity of goods to be provided if it is prevented from providing the goods through any circumstances beyond its reasonable control including (but not limited to) industrial action, war, fire or prohibition or enactment of any kind, and will not be liable for any loss or damage incurred whatsoeverarising therefrom.
14. GOVERNING LAW
The contract shall be governed by English law and subject to the exclusive jurisdiction of the High Court in England.
Whilst every effort has been made to ensure that the prices and information contained within this publication are correct, Ventilation Centre Limitedcannot accept liability in respect of any loss or damage arising from any errors or omissions.
All rights reserved. The copyright and intellectual rights of this publication are owned by Ventilation Centre Limited, it’s partners or third party licensors. No part of this publication may be reproduced or transmitted in any form or by any means without prior written consent.
© 2009 Ventilation Centre Limited
Visit us online, and as well as our site being packed with useful information, you can take advantage of our current range of promotions and offers - defi nitely worth a visit.
Promotions and off ers
www.ventilationcentre.co.uk
Open a trading accountAnd have the use of up to 60 days credit, trade discounts and exclusive offers. To apply, contact your local trade centre for an application form or download at:
www.ventilationcentre.co.uk/application.asp
Reducing grilleprices
For more details, see page 55
Ductmate slide-on fl ange system
Ductmate slide-on fl ange system
Now available
Low cost range in stock
Welcome to the 2009 edition of the Ventilation Centre price list. Together with our existing range we’ve included a number of new products, all of which are in stock and available with trade discounts.
You’ll also fi nd our trade centres are well stocked with a wide variety of products which can be collected or delivered same day, and with 7:30am and Saturday opening, you can be sure that we’re around when you need us.
To fi nd out more about how we can make a real difference when buying your ventilation products, feel free to call into your local trade centre for a better deal.
Your single source for duct air system products
Head Office8 Downgate DriveSheffield S4 8BT
Tel: 0114 256 7300Fax: 0114 256 7301Email: [email protected]
Ventilation Centre SheffieldUnit 14 Riverside CourtDon RoadSheffield S9 2TJ
Tel: 0114 242 5377Fax: 0114 261 0495Email: [email protected]
Ventilation Centre HullUnit E Venture Business ParkWitty StreetHull HU3 4TT
Tel: 01482 212982Fax: 01482 212998Email: [email protected]
Ventilation Centre LeedsUnit 10 United Business ParkLowfields RoadLeeds LS12 6UB
Tel: 0113 234 1871Fax: 0113 234 1872Email: [email protected]
Ventilation Centre StockportUnit 7 Bredbury CourtAshton RoadStockportSK6 2QB
Tel: 0161 494 8600Fax: 0161 494 6166Email: [email protected]
Ventilation Centre Nottingham1 Tannery RoadGiltbrook Industrial ParkNottinghamNG16 2WP
Tel: 0115 xxx xxxxFax: 0115 xxx xxxxEmail: [email protected]
PRICE LIST2009 OVER 500PRODUCTSINSIDE
2009 PRICE LIST