VARCO PRUDEN’S Self Curbing Day Lighting Solution

PrisMAX SL for SSR & HWR Roof’s

PrisMAX SL GUIDES

There are many versions of PrisMAX SL Installation Guides. It is important to review the guide that is sent with the “For Construction Package” before installation. Before installation, contact Varco Pruden if guide is lost or missing. This Presentation show the Basic installation on SSR. Installation on HWR is similar, but many parts will be different.

PrisMAX SL MODEL

PrisMAX SL DIVERTER

Current Model Lens has top mounted screws vs side installed.

PrisMAX SL CROSS SECTION

BE SAFE!

TOOLS

Note: A Rivet Tool for a 9/32” Olympic Rivet will be required for installing side rail rivets.

PARTS

PARTS

PARTS

PARTS

BEGIN

Locating the PrisMAX Unit

Cutting the Rib

Locating the PrisMAX Unit

Cutting Access Hole

Preparing Diverter

Sealing the Closures

Preparing the Support Plate and the diverter

Preparing the Support Plate and the diverter(cont.)

Installing the Support Plate and the diverter

Installing the Support Plate and the diverter

Installing the Side Rails

Multiple Units

Installing Side Rails

Upper Diverter Closure

Lower Diverter Closure & CuttingAccess Hole

Lower Diverter Closure & CuttingAccess Hole

Cutting The RoofPanels

Insulation

Insulation

Foam Tape

Insulation Trim

Insulation Trim

Accessories

Accessories

Tape WhenAccessoriesAre Used

Preparing for Lens

Attaching the Lens

THE END of PrisMAXInstallation

Installed “PrisMAX SL” Trim Kits

Installation of the “PrisMAX SL” Install first 10’-0” Lowside Unit for

“multi-unit” systems

Installed “PrisMAX SL”

Installed “PrisMAX SL”

Installed “PrisMAX SL”

“PrisMAX SL”

“PrisMAX SL”