Valves - Conex Bänninger€¦ · Valves 1451 - 1/2" - 2" No Component Material Specification 1...
Transcript of Valves - Conex Bänninger€¦ · Valves 1451 - 1/2" - 2" No Component Material Specification 1...
Valves
Valves Range 1340 Double Check Valves PN16
Material Specification
1340 - 1/2" - 2"
No Component Material Specification 1 Body DZR Brass BS EN 12164 CW602N 2 Check Spool Acetal Acetal 3 Retaining Ring Nylon Nylon 66 4 Clip Stainless steel BS.ISO.15510 5 O Ring EPDM EN 2430:1995 6 Drain Screw DZR Brass BS EN 1982 CC491K
Valves Valves Range: 1340 Double Check Valves PN16
Product Steam Water Drinking Oil Air Gas Gas Gas Gas Water (Inert) (Combustible) (Corrosive) (Oxygen)
1340 x 3 3 x x x x x x
Valve Suitability
1340 Temp (°C) Bar psi
Water -10 to 85°C PN16
Max. working parameters
This is a representation of the full range from Conex Universal. IBP trade marks are registered in numerous countries.
Features and Benefits:• Designed in accordance with WRAS requirement
and BS 6282-1 Standards.
• ISO 228 parallel female ends.
• PN 16 from -10° to 85°C.
• Specifically designed to be used with water.
• Prevents back siphonage.
• Manufactured in accordance with BS EN 13959.
Double Check Valve - 1340
Order Code
ISO 288 threadSize DN A B
Weight (kg)
134050FF0160404 1/2" 15 70 17.3 0.10134050FF0160606 3/4" 20 85 19.8 0.17134050FF0160808 1" 25 100 22.8 0.27134050FF0161010 1 1/4" 32 120 26.1 0.40134050FF0161212 1 1/2" 40 138.5 30.3 0.58134050FF0161616 2" 50 183.2 35.8 1.30
Valves
Valves Range 1360 Horizontal Lift Check Valves PN32
Material Specification
1360 - 1/2" - 2"
No Component Material Specification 1 Body Bronze BS EN 1982 CC491K 2 Cap Bronze BS EN 1982 CC491K 3 Disc Bronze BS EN 1982 CC491K 4 Gasket Seal PTFE PTFE 5 ID Disc Aluminium EN 1706 LM6
Valves Valves Range: 1360 Horizontal Lift Check Valves PN32
Product Steam Water Drinking Oil Air Gas Gas Gas Gas Water (Inert) (Combustible) (Corrosive) (Oxygen)
1360 3 3 3 3 3 x x x x
Valve Suitability
1360 Temp (°C) Bar psi
Water -10°C to + 100°C PN 32
Water at 200°C PN16
Max. working parameters
Specification:Valves are manufactured in accordance with BS 5154.
Disc is spherical shaped guided in the cap. Body seat is integral.
Connecting threads are in accordance with BS EN 10266 (ISO7) or ISO228.
This valve is not suitable for use on Group 1 gases or unstable fluids, as defined by the Pressure Equipment Directive 97/23/EC.
36
32
28
24
20
16
12
8
4
0
Pre
ssur
e B
ar
Temperature oC
0 40 80 120 160 200 240
This is a representation of the full range from Conex Universal. IBP trade marks are registered in numerous countries.
Features and Benefits:• Suitable for water and steam service.
• Metal to metal seat.
• Designed in accordance with BS 5154 and WRAS requirements.
• Threads to BS EN 10226 (ISO7).
• Suitable for LTHW and chilled systems.
Horizontal Lift Check Valve - 1360
Order Code
BS EN 10226 (ISO 7) threadSize DN A B
Weight (kg)
136020RR0320404 1/2" 15 60 34 0.28136020RR0320606 3/4" 20 75 42 0.44136020RR0320808 1" 25 85 46 0.60136020RR0321010 1 1/4" 32 100 51 1.14136020RR0321212 1 1/2" 40 110 54 1.46136020RR0321616 2" 50 120 72 2.57
Valves
1451 - 1/2" - 2"
No Component Material Specification 1 Seat EPDM EN 2430:1995 2 Spring Stainless Steel BS.ISO.15510 3 Spindle (Up) Brass BS EN 12165 CW617N-DW 4 Spindle (Down) Brass BS EN 12165 CW617N-DW 5 Bonnet Brass BS EN 12165 CW617N-DW 6 Body Brass BS EN 12165 CW617N-DW
Valves Range 1451 Spring Check Non Return Valve
Material Specification
Valves Valves Range: 1451 Spring Check Non Return Valve
Product Steam Water Drinking Oil Air Gas Gas Gas Gas Water (Inert) (Combustible) (Corrosive) (Oxygen)
1451 x 3 3 x 3* x x x x
Valve Suitability
1451 Temp (°C) Bar psi
Water -10°C to + 100°C PN 12/10 Min Operating Pressure
1/2" - 1" 12 bar @ 90°C -0.002 bar to + 0.04 bar
1/4" - 2" 10 bar @ 90°C Not suitable for hot working
Max. working parameters
* Limited to 5 bar max
This is a representation of the full range from Conex Universal. IBP trade marks are registered in numerous countries.
Features and Benefits:• Designed in accordance with WRAS requirement.
• Brass core for improved strength and performance .
• PN12 up to 1", PN10 above 1".
• Threads to ISO228.
Non-Return Valve - 1451
Order Code
ISO228 ThreadSize DN A B
Weight (kg)
145110FF0120404 1/2" 15 12 47.5 33145110FF0120606 3/4" 20 12 51 42145110FF0120808 1" 25 12 58 47145110FF0101010 1 1/4" 32 10 72 59145110FF0101212 1 1/2" 40 10 83 67145110FF0101616 2" 50 10 91 83
Valves
Valves Range 1461 Foot Valve
Material Specification
1461 - 1/2" - 2"
No Component Material Specification 1 Seat EPDM EN 2430:1995 2 Spring Stainless Steel BS.ISO.15510 3 Spindle (Up) Brass BS EN 12165 CW617N-DW 4 Spindle (Down) Brass BS EN 12165 CW617N-DW 5 Bonnet Brass BS EN 12165 CW617N-DW 6 Body Brass BS EN 12165 CW617N-DW 7 Strainer Stainless Steel BS.ISO.15510 8 Strainer Adaptor Acetal Acetal
Valves Valves Range: 1461 Foot Valve
Product Steam Water Drinking Oil Air Gas Gas Gas Gas Water (Inert) (Combustible) (Corrosive) (Oxygen)
1461 x 3 x 3 3* x x x x
Valve Suitability
1461 Temp (°C) Bar psi
Water -10°C to + 100°C PN 12/10 Min Operating Pressure
1/2" - 1" 12 bar @ 90°C Not Suitable for Hot working Pressure
1/4" - 2" 10 bar @ 90°C
Max. working parameters
* Limited to 5 bar max
This is a representation of the full range from Conex Universal. IBP trade marks are registered in numerous countries.
Features and Benefits:• Designed in accordance with WRAS requirement.
• Stainless steel mesh strainer.
• Brass core for improved strength and performance.
• PN12 up to 1", PN10 above 1".
• Threads to ISO228.
Non-Return Valve - 1461
Order Code
ISO228 ThreadSize DN A B
Weight (kg)
146110FF0120404 1/2" 15 12 65 33146110FF0120606 3/4" 20 12 86 42146110FF0120808 1" 25 12 103.5 47146110FF0101010 1 1/4" 32 10 119 59146110FF0101212 1 1/2" 40 10 141.5 67146110FF0101616 2" 50 10 159 83
Valves
Valves Range 1470 Swing Check Valve PN25 (Brass)
Material Specification
1470 - 1/2" - 2"
No Component Material Specification 1 Body Brass BS EN 112165 CW617N 2 Cap Brass BS EN 112165 CW617N 3 Identity Disc Aluminium EN 1706 LM6 4 Swing Pin Stainless steel BS.ISO.15510 5 Swing Arm Brass BS EN 112165 CW617N 6 Seat Brass BS EN 112165 CW617N 7 Retaining Nut Brass BS EN 112165 CW617N
Valves Valves Range: 1470 Swing Check Valve PN25 (Brass)
Product Steam Water Drinking Oil Air Gas Gas Gas Gas Water (Inert) (Combustible) (Corrosive) (Oxygen) 1470 3 3 3 3 x x x x x
Valve Suitability
1470 Temp (°C) Bar psi
Water -10°C to + 100°C PN25
at 186°C PN10.5
Max. working parameters
Specification:Brass Body.
Metal Disc, Screwed in Cap.
Operation is automatic using a swing type check.
Valves are manufactured in accordance with BS5154:1991 PN25 for Series B ratings.
Connecting threads are to BS EN 10226.
This valve is not suitable for use on Group 1 gasses or unstable fluids, as defined by the Pressure Equipment Directive 97/23/EC.
36
32
28
24
20
16
12
8
4
0
Pre
ssur
e B
ar
Temperature oC
0 30 60 90 120 150 180 210
186100
10.5
25
This is a representation of the full range from Conex Universal. IBP trade marks are registered in numerous countries.
Features and Benefits:• Designed in accordance with WRAS requirement.
• Suitable for water and other liquids.
• Metal to metal seat.
• Horizontal swing check design.
• Choice of alternative disc material.
• Threads to BS EN 10226 (ISO 7).
• Threads to ISO228 available to order.
Swing Check Valve - 1470
Order Code
ISO7 ThreadSize DN A B
Weight (kg)
147010RR0250404 1/2" 15 60 42 0.26147010RR0250606 3/4" 20 70 48 0.37147010RR0250808 1" 25 80 54 0.64147010RR0251010 1 1/4" 32 90 60 0.92147010RR0251212 1 1/2" 40 100 70 1.26147010RR0251616 2" 50 110 80 1.95
Valves
Valves Range 1470 Swing Check Valve PN25 (Bronze)
Material Specification
1470 - 1/2" - 2"
No Component Material Specification 1 Body Bronze BS EN 1982 CC491K 2 Cap Bronze BS EN 1982 CC491K 3 Identity Disc Aluminium EN 1706 LM6 4 Swing Pin Stainless steel BS.ISO.15510 5 Swing Arm Bronze BS EN 1982 CC491K 6 Seat Bronze BS EN 1982 CC491K 7 Retaining Nut Bronze BS EN 1982 CC491K
Valves Valves Range: 1470 Swing Check Valve PN25 (Bronze)
Product Steam Water Drinking Oil Air Gas Gas Gas Gas Water (Inert) (Combustible) (Corrosive) (Oxygen)
1470 3 3 3 3 3 x x x x
Valve Suitability
1470 Temp (°C) Bar psi
Water -10°C to + 100°C PN25
at 186°C PN10.5
Max. working parameters
Specification:Bronze Body
Metal Disc, Screwed in Cap.
Operation is automatic using a swing type check.
Valves are manufactured in accordance with BS5154:1991 PN25 for Series B ratings.
This valve is not suitable for use on Group 1 gasses or unstable fluids, as defined by the Pressure Equipment Directive 97/23/EC.
This is a representation of the full range from Conex Universal. IBP trade marks are registered in numerous countries.
Features and Benefits:• Designed in accordance with WRAS requirement.
• Suitable for water and other liquids.
• Metal to metal seat.
• Horizontal swing check design.
• Choice of alternative disc material.
• Threads to BS EN 10226 ( ISO7).
• Suitable for LTHW and chilled systems.
36
32
28
24
20
16
12
8
4
0
Pre
ssur
e B
ar
Temperature oC
0 30 60 90 120 150 180 210
186100
10.5
25
Swing Check Valve - 1470
Order Code
ISO7 ThreadSize DN A B
Weight (kg)
147020RR0250404 1/2" 15 60 42 0.36147020RR0250606 3/4" 20 70 48 0.44147020RR0250808 1" 25 80 54 0.69147020RR0251010 1 1/4" 32 90 60 0.97147020RR0251212 1 1/2" 40 100 70 1.38147020RR0251616 2" 50 110 80 2.01