€¦ · · 2018-05-22Threaded valve ends NPT A Model: • Designed for easy installation and...

Section 8

PVC and CPVC Valves

Effective August 27, 2012

Prices effective 8/27/12. See www.gfpiping.com for updated information.

The technical information given in this publication implies no warranty of any kind and is subject to change without notice. Please consult our Terms and Conditions of Sale.

For more information about any of our product lines, please call (800) 854-4090.


8.3

ValvesPage

Ball Valves 8.4

Check Valves & Line Strainer 8.8

Diaphragm Valves 8.14

Butterfly Valves 8.18


Valves

^ = 40% Restock Charge* = Non-Cancelable/Non-Returnable

8.4

Ball ValvesType 546 PVC Ball ValveWith mounting insertsWith solvent cement sockets inch ASTMInclusive 2 threaded valve ends NPT

A

Model:• Designed for easy installation and removal• Not dimensionally compatible with Type 346 and Type 370• Ball seals PTFE• Integrated stainless steel mounting inserts• Threaded valve ends are only enclosed for 3/8" to 2"Option:• Contact customer service for customization• Multifunctional module with integrated limit switches• Pneumatic or electric actuators from GFSize PSI EPDM

Part No.USD FPM

Part No.USD Std. Pack

3∕8 240 161 546 341 55.00 161 546 351 67.00 11∕2 240 161 546 342 57.00 161 546 352 68.00 13∕4 240 161 546 343 67.00 161 546 353 80.00 11 240 161 546 344 81.00 161 546 354 99.00 1

1 1∕4 240 161 546 345 102.00 161 546 355 122.00 1

1 1∕2 240 161 546 346 131.00 161 546 356 155.00 12 240 161 546 347 165.00 161 546 357 208.00 1

2 1∕2 240 161 546 348 396.00 161 546 358 469.00 13 240 161 546 349 473.00 161 546 359 573.00 14 240 161 546 350 625.00 161 546 360 762.00 1


Valves


8.5

Type 546 CPVC Ball ValveWith mounting insertsWith solvent cement sockets inch ASTMIncluding 2 threaded union ends NPT

A

Model:• Designed for easy installation and removal• Not dimensionally compatible with Type 346 and Type 370• Ball seals PTFE• Integrated stainless steel mounting inserts• Threaded valve ends are only enclosed for 3/8" to 2"Option:• Contact customer service for customization• Multifunctional module with integrated limit switches• Pneumatic or electric actuators from GFSize PSI EPDM

Part No.USD FPM


3∕8 240 163 546 341 91.00 163 546 351 101.00 11∕2 240 163 546 342 96.00 163 546 352 103.00 13∕4 240 163 546 343 109.00 163 546 353 126.00 11 240 163 546 344 133.00 163 546 354 158.00 1

1 1∕4 240 163 546 345 168.00 163 546 355 197.00 1

1 1∕2 240 163 546 346 201.00 163 546 356 237.00 12 240 163 546 347 249.00 163 546 357 314.00 1

2 1∕2 240 163 546 348 635.00 163 546 358 735.00 13 240 163 546 349 790.00 163 546 359 916.00 14 240 163 546 350 950.00 163 546 360 1103.00 1


Valves


8.6

Type 375 True Union Ball Valve PVCSolvent cement socket/Threaded NPT

A

Model:• Designed for easy installation and removal• z-dimension, valve end and union nut are not compatible with type 546• Ball seals PTFE• Actuation not available• Threaded valve ends are only enclosed for 3/8" to 2"Range of use:• Basic applications of the water treatment sector as well as other applications involving

water.Size PSI EPDM

Part No.USD FPM


3∕8 240 161 375 001 41.00 161 375 016 47.00 11∕2 240 161 375 002 42.00 161 375 017 48.00 13∕4 240 161 375 003 47.00 161 375 018 56.00 11 240 161 375 004 56.00 161 375 019 71.00 1

1 1∕4 240 161 375 005 71.00 161 375 020 90.00 1

1 1∕2 240 161 375 006 85.00 161 375 021 114.00 12 240 161 375 007 122.00 161 375 022 159.00 1

2 1∕2 150 161 375 008 258.00 161 375 023 330.00 13 150 161 375 009 330.00 161 375 024 410.00 14 150 161 375 010 497.00 161 375 025 585.00 1

Type 375 True Union Ball Valve CPVCSocket/Threaded NPT

A

Size[inch]

EPDMPart No.

USD FPMPart No.

USD Std. Pack

1∕2 163 375 002 46.00 163 375 017 67.00 13∕4 163 375 003 68.00 163 375 018 84.00 11 163 375 004 80.00 163 375 019 103.00 1

1 1∕4 163 375 005 104.00 163 375 020 155.00 11 1∕2 163 375 006 133.00 163 375 021 169.00 1


Valves


8.7

Type 543 PVC 3-Way Ball ValveHorizontal/L-portWith solvent cement sockets ASTM

A

Model:• For easy installation and removal (valve end and union nut are compatible with type

546)• Ball seals PTFE• Pneumatic or electric actuator available separately• Angle of operation 360° without turn limiter• Turn limiter 90° enclosed, in different positions usable as a clip-on ring• Integrated stainless steel mounting inserts• Flow: center left, center rightSize PSI EPDM

Part No.USD FPM

Part No.USD

3∕8 150 161 543 081 86.00 161 543 091 97.001∕2 150 161 543 082 87.00 161 543 092 99.003∕4 150 161 543 083 104.00 161 543 093 113.001 150 161 543 084 127.00 161 543 094 140.00

1 1∕4 150 161 543 085 147.00 161 543 095 164.001 1∕2 150 161 543 086 169.00 161 543 096 188.00

2 150 161 543 087 208.00 161 543 097 244.00


Valves


8.8

Check Valves & Line StrainerType 369 Wafer Check Valve PVCWithout spring

A

Model:• Supporting eyelets for simple fitting• Suitable for vertical and horizontal mountingInstallation instruction:• Installation between ISO/DIN (all dimensions) and ANSI flange adaptors (all except

DN32 and DN125)• Installation with ANSI flange adaptor: for wafer check valves 1 1/2" to 3", use ANSI

flange adaptors with the next bigger dimension (example: 1 1/2" wafer check valvebetween 2" ANSI flange adaptor)

• Centering by body diameter (ISO/DIN by D3, ANSI by D)• Sealing with O-rings• A stabilizing zone of at least 5 times nominal diameter should be provided before and

after the wafer check valve• Do not install on pump flange• For use with Sch40 or Sch80 pipe• Wafer check valves without reset spring are not recommended for pulsating

flows (production of noise)d[mm]

Size PSI EPDMPart No.

USD FPMPart No.

USD Std. Pack

50 1 1∕2 150 161 369 003 135.00 161 369 023 218.00 163 2 150 161 369 004 142.00 161 369 024 232.00 175 2 1∕2 150 161 369 005 173.00 161 369 025 284.00 190 3 150 161 369 006 187.00 161 369 026 315.00 1

110 4 150 161 369 007 218.00 161 369 027 374.00 1

140 5 150 161 369 009 310.00 161 369 029 478.00 1160 6 90 161 369 010 315.00 161 369 030 516.00 1225 8 90 161 369 011 400.00 161 369 031 612.00 1280 10 90 161 369 012 606.00 161 369 032 902.00 1315 12 90 161 369 013 856.00 161 369 033 1197.00 1

Type 304 Translucent Y-Check Valve PVCTransparent body with solvent cement spigots ASTM

A


USD FPMPart No.

USD Std. Pack

1∕2 150 192 304 006 44.00 192 304 031 53.00 13∕4 150 192 304 007 51.00 192 304 032 63.00 11 150 192 304 008 60.00 192 304 033 74.00 1

1 1∕4 150 192 304 009 77.00 192 304 034 99.00 11 1∕2 150 192 304 010 109.00 192 304 035 155.00 1

2 150 192 304 011 158.00 192 304 036 215.00 13 150 192 304 013 354.00 192 304 038 410.00 1


Valves


8.9

Type 306 Translucent Line Strainer PVCTransparent body with solvent cement spigots ASTM/ANSI

A

Model:• Protects valves, pumps, etc. from becoming damaged• Easy dismantling for cleaning the screens• With screen PVC, perforation ø 0.8 mm, 20 mesh, 1/32 inchSize PSI EPDM

Part No.USD FPM


1∕2 150 192 306 300 51.00 192 306 349 63.00 13∕4 150 192 306 350 61.00 192 306 399 70.00 11 150 192 306 400 67.00 192 306 449 75.00 1

1 1∕4 150 192 306 450 116.00 192 306 499 127.00 11 1∕2 150 192 306 500 122.00 192 306 549 139.00 1

2 150 192 306 550 152.00 192 306 599 171.00 13 150 192 306 650 288.00 192 306 699 338.00 1

Check valve type 561 PVCWith solvent cement sockets Inch ASTMThreaded valve ends NPT

A

Model:• Designed for easy installation and removal• Vibration free even at high flow velocity• Flow-optimized return cone, double guided• For vertical installation• Compact installation length, same as ball valve type 546• Z-length, end connectors and union nuts not compatible with type 360NPT[inch]

PSI EPDMPart No.

USD FPMPart No.

USD Std. Pack D[mm]

L[mm]

L2[mm]

z[mm]

3∕8 240 161 561 101 45.00 161 561 111 54.00 1 50 105 56 671∕2 240 161 561 102 45.00 161 561 112 54.00 1 50 105 56 613∕4 240 161 561 103 53.00 161 561 113 57.00 1 58 121 65 701 240 161 561 104 56.00 161 561 114 68.00 1 68 133 71 76

1 1∕4 240 161 561 105 69.00 161 561 115 82.00 1 84 154 85 90

1 1∕2 240 161 561 106 85.00 161 561 116 109.00 1 97 164 89 942 240 161 561 107 122.00 161 561 117 160.00 1 124 183 101 107

2 1∕2 240 161 561 108 287.00 161 561 118 344.00 1 166 233 136 1443 240 161 561 109 338.00 161 561 119 429.00 1 200 254 141 1514 240 161 561 110 797.00 161 561 120 884.00 1 238 301 164 174


Valves


8.10

Check valve type 562 PVCWith solvent cement sockets inch ASTMThreaded valve ends NPT

A

Model:• Spring loaded, spring made of stainless steel (1.4310)• Spring available in other materials, see spare parts• Designed for easy installation and removal• Vibration free even at high flow velocity• Flow-optimized return cone, double guided• For horizontal or vertical installation • Compact installation length, same as ball valve type 546• Z-length, end connectors and union nuts not compatible with type 360NPT[inch]

PSI EPDMPart No.

USD FPMPart No.

USD Std. Pack

3∕8 240 161 562 101 65.00 161 562 111 77.00 11∕2 240 161 562 102 65.00 161 562 112 77.00 13∕4 240 161 562 103 75.00 161 562 113 87.00 11 240 161 562 104 81.00 161 562 114 95.00 1

1 1∕4 240 161 562 105 98.00 161 562 115 113.00 1

1 1∕2 240 161 562 106 121.00 161 562 116 141.00 12 240 161 562 107 172.00 161 562 117 201.00 1

2 1∕2 240 161 562 108 343.00 161 562 118 401.00 13 240 161 562 109 429.00 161 562 119 501.00 14 240 161 562 110 1115.00 161 562 120 1238.00 1

NPT[inch]

D[mm]

L[mm]

L2[mm]

z[mm]

3∕8 50 105 56 671∕2 50 105 56 613∕4 58 121 65 701 68 133 71 76

1 1∕4 84 154 85 90

1 1∕2 97 164 89 942 124 183 101 107

2 1∕2 166 233 136 1443 200 254 141 1514 238 301 164 174


Valves


8.11

Check valve type 561 CPVCWith solvent cement sockets Inch ASTMInclusive 2 threaded valve ends NPT

A

Model:• Designed for easy installation and removal• Vibration free even at high flow velocity• Flow-optimized return cone, double guided• For vertical installation• Compact installation length, same as ball valve type 546• Z-length, end connectors and union nuts not compatible with type 360NPT[inch]

PSI EPDMPart No.

USD FPMPart No.

USD Std. Pack

3∕8 240 163 561 101 90.00 163 561 111 100.00 11∕2 240 163 561 102 90.00 163 561 112 100.00 13∕4 240 163 561 103 108.00 163 561 113 122.00 11 240 163 561 104 129.00 163 561 114 153.00 1

1 1∕4 240 163 561 105 188.00 163 561 115 221.00 1

1 1∕2 240 163 561 106 197.00 163 561 116 237.00 12 240 163 561 107 251.00 163 561 117 313.00 1

2 1∕2 240 163 561 108 639.00 163 561 118 768.00 13 240 163 561 109 800.00 163 561 119 960.00 14 240 163 561 110 1437.00 163 561 120 2366.00 1

NPT[inch]

D[mm]

L[mm]

L2[mm]

z[mm]

3∕8 50 105 56 671∕2 50 105 56 613∕4 58 121 65 701 68 133 71 76

1 1∕4 84 154 85 90

1 1∕2 97 164 89 942 124 183 101 107

2 1∕2 166 233 136 1443 200 254 141 1514 238 301 164 174


Valves


8.12

Type 591 PVC Ventilating and bleed valveWith solvent cement sockets inch ASTMThreaded valve ends NPTModel:• With protection cap up to DN50 made of PP-GF, DN65-100

made of POM• Floater made of PP-H• Designed for easy installation and removal• Compact installation length

A

NPT[inch]

PSI EPDMPart No.

USD FPMPart No.

USD Std. Pack D[mm]

L[mm]

t[mm]

3∕8 240 161 591 101 68.00 161 591 111 82.00 1 50 111 191∕2 240 161 591 102 68.00 161 591 112 82.00 1 50 119 233∕4 240 161 591 103 90.00 161 591 113 108.00 1 58 137 251 240 161 591 104 111.00 161 591 114 133.00 1 68 152 28

1 1∕4 240 161 591 105 134.00 161 591 115 162.00 1 84 176 31

1 1∕2 240 161 591 106 208.00 161 591 116 250.00 1 97 193 352 240 161 591 107 296.00 161 591 117 356.00 1 124 229 38

2 1∕2 240 161 591 108 475.00 161 591 118 569.00 1 166 258 453 240 161 591 109 593.00 161 591 119 711.00 1 200 277 484 240 161 591 110 711.00 161 591 120 854.00 1 238 320 58

Type 595 PVC ventilating valveWith solvent cement sockets inch ASTMThreaded valve ends NPTModel:• With protection cap up to DN50 made of PP-GF, DN65-100

made of POM• Spring loaded, spring made of NIMONIC 90, HALAR coated• Spring available in other materials, see spare parts• Designed for easy installation and removal• Compact installation length

A

NPT[inch]

PSI EPDMPart No.

USD FPMPart No.

USD Std. Pack D[mm]

L[mm]

t[mm]

3∕8 240 161 595 101 82.00 161 595 111 95.00 1 50 111 191∕2 240 161 595 102 82.00 161 595 112 95.00 1 50 119 233∕4 240 161 595 103 108.00 161 595 113 127.00 1 58 137 251 240 161 595 104 133.00 161 595 114 155.00 1 68 152 28

1 1∕4 240 161 595 105 162.00 161 595 115 188.00 1 84 176 31

1 1∕2 240 161 595 106 250.00 161 595 116 292.00 1 97 193 352 240 161 595 107 356.00 161 595 117 415.00 1 124 229 38

2 1∕2 240 161 595 108 569.00 161 595 118 664.00 1 166 258 453 240 161 595 109 711.00 161 595 119 830.00 1 200 277 484 240 161 595 110 853.00 161 595 120 995.00 1 238 320 58


Valves


8.13

Type 591 CPVC Ventilating and bleedvalveWith solvent cement sockets inch ASTMThreaded valve ends NPTModel:• With protection cap up to DN50 made of PP-GF, DN65-100

made of POM• Floater made of PP-H• Designed for easy installation and removal• Compact installation length

A

NPT[inch]

PSI EPDMPart No.

USD FPMPart No.

USD Std. Pack D[mm]

L[mm]

t[mm]

3∕8 240 163 591 101 144.00 163 591 111 173.00 1 50 111 191∕2 240 163 591 102 144.00 163 591 112 173.00 1 50 119 233∕4 240 163 591 103 197.00 163 591 113 237.00 1 58 137 251 240 163 591 104 276.00 163 591 114 331.00 1 68 152 28

1 1∕4 240 163 591 105 398.00 163 591 115 478.00 1 84 176 31

1 1∕2 240 163 591 106 522.00 163 591 116 627.00 1 97 193 352 240 163 591 107 662.00 163 591 117 794.00 1 124 229 38

2 1∕2 240 163 591 108 1058.00 163 591 118 1271.00 1 166 258 453 240 163 591 109 1323.00 163 591 119 1588.00 1 200 277 494 240 163 591 110 1588.00 163 591 120 1906.00 1 238 320 58

Type 595 CPVC ventilating valveWith solvent cement sockets inch ASTMThreaded valve ends NPTModel:• With protection cap up to DN50 made of PP-GF, DN65-100

made of POM• Spring loaded, spring made of NIMONIC 90, HALAR coated• Spring available in other materials, see spare parts• Designed for easy installation and removal• Compact installation length

A

NPT[inch]

PSI EPDMPart No.

USD FPMPart No.

USD Std. Pack D[mm]

L[mm]

t[mm]

3∕8 240 163 595 101 164.00 163 595 111 192.00 1 50 111 191∕2 240 163 595 102 164.00 163 595 112 192.00 1 50 119 233∕4 240 163 595 103 224.00 163 595 113 264.00 1 58 137 251 240 163 595 104 308.00 163 595 114 363.00 1 68 152 28

1 1∕4 240 163 595 105 437.00 163 595 115 517.00 1 84 176 31

1 1∕2 240 163 595 106 582.00 163 595 116 686.00 1 97 193 352 240 163 595 107 746.00 163 595 117 878.00 1 124 229 38

2 1∕2 240 163 595 108 1194.00 163 595 118 1405.00 1 166 258 453 240 163 595 109 1492.00 163 595 119 1757.00 1 200 277 494 240 163 595 110 1790.00 163 595 120 2108.00 1 238 320 58


Valves


8.14

Diaphragm ValvesType 514 Diaphragm Valve PVCWith solvent cement sockets ASTM

A

Model:• Double flow rate compared to predecessor• One housing nut replaces four screws• Handwheel with built-in locking mechanism• Designed for easy installation and removal• Short overall lengthOption:• Contact customer service for customization• Self adjusting multifunctional module with integrated limit switches• PN16 available as a configurationSize PSI EPDM

Part No.USD PTFE/EPDM


1∕2 150 161 514 612 113.00 161 514 632 187.00 13∕4 150 161 514 613 126.00 161 514 633 198.00 11 150 161 514 614 162.00 161 514 634 288.00 1

1 1∕4 150 161 514 615 250.00 161 514 635 394.00 11 1∕2 150 161 514 616 253.00 161 514 636 394.00 1

2 150 161 514 617 289.00 161 514 637 483.00 1 Size D

[mm]D2[mm]

D3[mm]

L[mm]

L2[mm]

H[mm]

H1[mm]

H2[mm]

M z[mm]

Lift =Hx[mm]

1∕2 65 65 43 141 25 73 14 12 M6 96 73∕4 80 65 51 165 25 81 18 12 M6 114 101 88 87 58 179 25 107 22 12 M6 122 13

1 1∕4 101 87 72 204 45 115 26 15 M8 140 151 1∕2 117 135 83 230 45 148 32 15 M8 160 19

2 144 135 100 268 45 166 39 15 M8 190 25


Valves


8.15

Type 514 Diaphragm Valve CPVCSolvent cement socket ASTM

A

Model:• Double flow rate compared to predecessor• One housing nut replaces four screws• Handwheel with built-in locking mechanism• Designed for easy installation and removal• Short overall lengthOption:• Contact customer service for customization• Self adjusting multifunctional module with integrated limit switchesSize PSI EPDM



1∕2 150 163 514 612 205.00 163 514 632 285.00 13∕4 150 163 514 613 221.00 163 514 633 313.00 11 150 163 514 614 284.00 163 514 634 392.00 1

1 1∕4 150 163 514 615 366.00 163 514 635 484.00 11 1∕2 150 163 514 616 400.00 163 514 636 544.00 1

2 150 163 514 617 427.00 163 514 637 613.00 1 Size D

[mm]D2[mm]

D3[mm]

L[mm]

L2[mm]

H[mm]

H1[mm]

H2[mm]

M z[mm]

Lift =Hx[mm]

1∕2 65 65 43 141 25 73 14 12 M6 96 73∕4 80 65 51 165 25 81 18 12 M6 114 101 88 87 58 179 25 107 22 12 M6 122 13

1 1∕4 101 87 72 204 45 115 26 15 M8 140 151 1∕2 117 135 83 230 45 148 32 15 M8 160 19

2 144 135 100 268 45 166 39 15 M8 190 25


Valves


8.16

Type 517 Diaphragm Valve PVCANSI Flanged

A

Model:• Double flow rate compared to predecessor• One housing nut replaces four screws• Handwheel with built-in locking mechanism• Overall length EN 558• Connecting dimension: ANSI/ASME B 16.5 class 150, ASTM D 4024, BS 1560, BS

EN 1759• Joining face flatOption:• Contact customer service for customization• Self adjusting multifunctional module with integrated limit switchesSize PSI EPDM



1∕2 150 161 517 612 145.00 161 517 632 254.00 13∕4 150 161 517 613 167.00 161 517 633 279.00 11 150 161 517 614 205.00 161 517 634 359.00 1

1 1∕4 150 161 517 615 253.00 161 517 635 456.00 11 1∕2 150 161 517 616 327.00 161 517 636 460.00 1

2 150 161 517 617 382.00 161 517 637 568.00 1 Size D

[mm]D2[mm]

D3[mm]

D4[mm]

D5[mm]

L[mm]

L2[mm]

H[mm]

H1[mm]

H2[mm]

M Lift =Hx[mm]

1∕2 65 65 95 60 16 130 25 73 14 12 M6 73∕4 80 65 105 70 16 150 25 81 18 12 M6 101 88 87 115 79 16 160 25 107 22 12 M6 13

1 1∕4 101 87 140 89 16 180 45 115 26 15 M8 151 1∕2 117 135 150 98 16 200 45 148 32 15 M8 19

2 144 135 165 121 19 230 45 166 39 15 M8 25


Valves


8.17

Type 517 Diaphragm Valve CPVCANSI Flanged

A

Model:• Double flow rate compared to predecessor• One housing nut replaces four screws• Handwheel with built-in locking mechanism• Overall length EN 558• Connecting dimension: ANSI/ASME B 16.5 class 150, ASTM D 4024, BS 1560, BS

EN 1759• Joining face flatOption:• Contact customer service for customization• Self adjusting multifunctional module with integrated limit switchesSize PSI EPDM



1∕2 150 163 517 712 239.00 163 517 732 328.00 13∕4 150 163 517 713 266.00 163 517 733 354.00 11 150 163 517 714 331.00 163 517 734 464.00 1

1 1∕4 150 163 517 715 423.00 163 517 735 593.00 11 1∕2 150 163 517 716 429.00 163 517 736 693.00 1

2 150 163 517 717 480.00 163 517 737 777.00 1 Size D

[mm]D2[mm]

D3[mm]

D4[mm]

D5[mm]

L[mm]

L2[mm]

H[mm]

H1[mm]

H2[mm]

M Lift =Hx[mm]

1∕2 65 65 95 60 16 130 25 73 14 12 M6 73∕4 80 65 105 70 16 150 25 81 18 12 M6 101 88 87 115 79 16 160 25 107 22 12 M6 13

1 1∕4 101 87 140 89 16 180 45 115 26 15 M8 151 1∕2 117 135 150 98 16 200 45 148 32 15 M8 19

2 144 135 165 121 19 230 45 166 39 15 M8 25 Type 317 Diaphragm Valve PVCFlanged

A

Model:• Joining face flat• ½"–2½" with backing flange• 3"–4" with fixed flange• Overall length according to EN 558• Connecting dimension: ANSI/ASME B 16.5 class 150, ASTM D 4024, BS 1560, BS

EN 1759Option:• Handwheel lockable DN15-65 (basic version not lockable)* 3"–4" fixed flanges metric and inch ANSI B16.5Size PSI EPDM

Part No.USD PTFE with EPDM

supp. diaphragmPart No.

USD Std. Pack

2 1∕2 150 161 317 623 ^ 553.00 161 317 638 ^ 855.00 1* 3 150 161 317 024 ^ 733.00 161 317 039 ^ 1142.00 1

4 90 161 317 325 ^ 1021.00 161 317 340 ^ 1612.00 1* 6 105 161 317 027 ^ 2620.00 161 317 042 ^ 4130.00 1


Valves


8.18

Butterfly ValvesType 567 Butterfly Valve PVCHand lever with ratchet settings

A

Model:• Connecting dimension: ISO 7005 PN 10, EN 1092 PN 10, DIN 2501 PN 10, ANSI B

16.5 Class 150, BS 1560:1989, JIS B 2220• Up to DN 300: Overall length according to EN558 (DN 50-200: line 25, DN250, 300

line 16), ISO 5752• We recommend the 10" and 12" dimensions not exceed 90 psi for the hand lever ver-

siond[mm]


USD FPMPart No.

USD Std. Pack

63 2 150 161 567 002 196.00 161 567 022 309.00 175 2 1∕2 150 161 567 003 205.00 161 567 023 315.00 190 3 150 161 567 004 217.00 161 567 024 328.00 1

110 4 150 161 567 005 236.00 161 567 025 357.00 1140 5 150 161 567 006 314.00 161 567 026 479.00 1

160 6 150 161 567 007 338.00 161 567 027 499.00 1225 8 150 161 567 008 506.00 161 567 028 647.00 1280 10 150 161 567 009 1804.00 161 567 029 2664.00 1315 12 150 161 567 010 2466.00 161 567 030 3344.00 1

Type 567 Butterfly Valve PVCReduction Gear with Handwheel (14"–24" available inPP)

A


16.5 Class 150, BS 1560:1989, JIS B 2220• Up to DN 300: Overall length according to EN558 (DN 50-200: line 25, DN250, 300

line 16), ISO 5752d[mm]


USD FPMPart No.

USD Std. Pack

63 2 150 161 567 042 444.00 161 567 062 579.00 175 2 1∕2 150 161 567 043 455.00 161 567 063 585.00 190 3 150 161 567 044 465.00 161 567 064 596.00 1

110 4 150 161 567 045 481.00 161 567 065 624.00 1140 5 150 161 567 046 552.00 161 567 066 737.00 1

160 6 150 161 567 047 573.00 161 567 067 756.00 1225 8 150 161 567 048 664.00 161 567 068 896.00 1280 10 150 161 567 049 2045.00 161 567 069 3248.00 1315 12 150 161 567 050 2742.00 161 567 070 4007.00 1


Valves


8.19

Type 567 Butterfly Valve CPVCHand lever with ratchet settings

A


16.5 Class 150, BS 1560:1989, JIS B 2220• Overall length according to EN 558-1, ISO 5752d[mm]


USD FPMPart No.

USD Std. Pack

63 2 150 163 567 002 377.00 163 567 022 528.00 175 2 1∕2 150 163 567 003 416.00 163 567 023 572.00 190 3 150 163 567 004 462.00 163 567 024 672.00 1

110 4 150 163 567 005 538.00 163 567 025 778.00 1140 5 150 163 567 006 699.00 163 567 026 977.00 1160 6 150 163 567 007 736.00 163 567 027 1021.00 1225 8 150 163 567 008 950.00 163 567 028 1322.00 1

Type 567 Butterfly Valve CPVCReduction gear with handwheel

A


16.5 Class 150, BS 1560:1989, JIS B 2220• Overall length according to EN 558-1, ISO 5752d[mm]


USD FPMPart No.

USD Std. Pack

63 2 150 163 567 042 611.00 163 567 062 710.00 175 2 1∕2 150 163 567 043 653.00 163 567 063 777.00 190 3 150 163 567 044 735.00 163 567 064 862.00 1

110 4 150 163 567 045 812.00 163 567 065 954.00 1140 5 150 163 567 046 909.00 163 567 066 1086.00 1160 6 150 163 567 047 1048.00 163 567 067 1145.00 1225 8 150 163 567 048 1276.00 163 567 068 1403.00 1


Valves


8.20

Type 568 Butterfly Valve PVCBare shaft

A

Model:• Outer body in GGG-40.3 epoxy-coated• Connecting dimension ANSI B 16.5 Class 150• Overall length according to EN 558-1, ISO 5752• Interface F07 according to DIN/ISO 5211Size PSI EPDM

Part No.USD FPM


2 150 161 568 902 286.00 161 568 922 440.00 12 1∕2 150 161 568 903 302.00 161 568 923 452.00 1

3 150 161 568 904 317.00 161 568 924 470.00 14 150 161 568 905 347.00 161 568 925 510.00 15 150 161 568 906 458.00 161 568 926 685.00 -6 150 161 568 907 495.00 161 568 927 711.00 18 150 161 568 908 799.00 161 568 928 924.00 1

Size d2

[mm]D D1

[mm]D3[mm]

D4[mm]

H[mm]

H1[mm]

H2[mm]

H3[mm]

H4[mm]

L[mm]

Q1[mm]

Q2[mm]

2 150 UNC 5/8 121 70 90 222 77 134 27 23 45 402 1∕2 170 UNC 5/8 138 70 90 235 83 140 27 23 46 54 35

3 177 UNC 5/8 152 70 90 247 89 146 27 23 49 67 504 216 UNC 5/8 191 70 90 287 104 167 16 23 56 88 745 246 UNC 3/4 216 70 90 313 117 181 16 23 64 113 976 273 UNC 3/4 241 70 90 335 130 189 19 23 72 139 1238 334 UNC 3/4 298 70 90 387 158 210 19 23 73 178 169


Valves


8.21

Type 568 Butterfly Valve PVCHand lever with ratchet settings

A

Model:• Outer body in GGG-40.3 epoxy-coated• Connecting dimension ANSI B 16.5 Class 150• Overall length according to EN 558-1, ISO 5752Size PSI EPDM

Part No.USD FPM


2 150 161 568 102 321.00 161 568 122 491.00 12 1∕2 150 161 568 103 336.00 161 568 123 505.00 1

3 150 161 568 104 354.00 161 568 124 522.00 14 150 161 568 105 384.00 161 568 125 567.00 15 150 161 568 106 510.00 161 568 126 761.00 -6 150 161 568 107 549.00 161 568 127 791.00 18 150 161 568 108 888.00 161 568 128 1027.00 1

Size d2

[mm]D D1

[mm]H[mm]

H1[mm]

H2[mm]

H3[mm]

L[mm]

L1[mm]

L2[mm]

L3[mm]

Q1[mm]

Q2[mm]

2 150 UNC 5/8 121 265 77 134 54 45 106 205 150 402 1∕2 170 UNC 5/8 138 277 83 140 54 46 106 205 160 54 35



Valves


8.22

Type 568 Butterfly Valve PVCReduction gear with handwheel

A

Model:• Outer body in GGG-40.3 epoxy-coated• Connecting dimension ANSI B 16.5 Class 150• Overall length according to EN 558-1, ISO 5752Size PSI EPDM

Part No.USD FPM


2 150 161 568 142 570.00 161 568 162 725.00 -2 1∕2 150 161 568 143 585.00 161 568 163 734.00 -

3 150 161 568 144 600.00 161 568 164 753.00 -4 150 161 568 145 629.00 161 568 165 793.00 -5 150 161 568 146 740.00 161 568 166 967.00 -6 150 161 568 147 777.00 161 568 167 994.00 18 150 161 568 148 1082.00 161 568 168 1206.00 1

Size d2

[mm]D D1

[mm]D3[mm]

H[mm]

H1[mm]

H2[mm]

H3[mm]

L[mm]

L1[mm]

L2[mm]

L3[mm]

L4[mm]

Q1[mm]

2 150 UNC 5/8 121 150 279 77 134 50 45 110 120 155 150 402 1∕2 170 UNC 5/8 138 150 291 83 140 50 46 110 120 155 160 54

3 177 UNC 5/8 152 150 303 89 146 50 49 110 120 155 175 674 216 UNC 5/8 191 150 339 104 167 50 56 110 120 155 244 885 246 UNC 3/4 216 150 366 117 181 50 64 110 120 155 272 1136 273 UNC 3/4 241 150 387 130 189 50 72 110 120 155 297 1398 334 UNC 3/4 298 150 436 158 210 50 73 110 120 155 360 178

Size Q2

[mm]

22 1∕2 35

3 504 745 976 1238 169


Valves


8.23

Type 568 Butterfly Valve CPVCBare shaft

A

Model:• Outer body in GGG-40.3 epoxy-coated• Connecting dimension ANSI B 16.5 Class 150• Overall length according to EN 558-1, ISO 5752• Interface F07 according to DIN/ISO 5211Size d

[mm]PSI EPDM

Part No.USD FPM

Part No.USD

2 63 150 163 568 902 553.00 163 568 922 639.002 1∕2 75 150 163 568 903 625.00 163 568 923 743.00

3 90 150 163 568 904 755.00 163 568 924 877.004 110 150 163 568 905 882.00 163 568 925 1011.005 140 150 163 568 906 1038.00 163 568 926 1211.006 160 150 163 568 907 1260.00 163 568 927 1416.008 225 150 163 568 908 1631.00 163 568 928 1836.00

Size d

[mm]PSI PTFE


2 63 150 163 568 932 Call 12 1∕2 75 150 163 568 933 Call 1

3 90 150 163 568 934 Call 14 110 150 163 568 935 Call 15 140 150 163 568 936 Call 16 160 150 163 568 937 Call 18 225 150 163 568 938 Call 1

Size d2

[mm]D D1

[mm]D3[mm]

D4[mm]

H[mm]

H1[mm]

H2[mm]

H3[mm]

H4[mm]

L[mm]

Q1[mm]

Q2[mm]

2 150 UNC 5/8 121 70 90 222 77 134 27 23 45 402 1∕2 170 UNC 5/8 138 70 90 235 83 140 27 23 46 54 35



Valves


8.24

Type 568 Butterfly Valve CPVCHand lever with ratchet settings

A

Model:• Outer body in GGG-40.3 epoxy-coated• Connecting dimension ANSI B 16.5 Class 150• Overall length according to EN 558-1, ISO 5752Size d

[mm]PSI EPDM

Part No.USD FPM

Part No.USD

2 63 150 163 568 102 621.00 163 568 122 743.002 1∕2 75 150 163 568 103 693.00 163 568 123 831.00

3 90 150 163 568 104 841.00 163 568 124 973.004 110 150 163 568 105 979.00 163 568 125 1126.005 140 150 163 568 106 1271.00 163 568 126 1414.006 160 150 163 568 107 1405.00 163 568 127 1575.008 225 150 163 568 108 1820.00 163 568 128 2042.00

Size d

[mm]PSI PTFE


2 63 150 163 568 302 Call 12 1∕2 75 150 163 568 303 Call 1


Size d2

[mm]D D1

[mm]H[mm]

H1[mm]

H2[mm]

H3[mm]

L[mm]

L1[mm]

L2[mm]

L3[mm]

Q1[mm]

Q2[mm]

2 150 UNC 5/8 121 265 77 134 54 45 106 205 150 402 1∕2 170 UNC 5/8 138 277 83 140 54 46 106 205 160 54 35



Valves


8.25

Type 568 Butterfly Valve CPVCReduction gear with handwheel

A

Model:• Outer body in GGG-40.3 epoxy-coated• Connecting dimension ANSI B 16.5 Class 150• Overall length according to EN 558-1, ISO 5752Size d

[mm]PSI EPDM

Part No.USD FPM

Part No.USD

2 63 150 163 568 142 836.00 163 568 162 924.002 1∕2 75 150 163 568 143 907.00 163 568 163 1027.00

3 90 150 163 568 144 1038.00 163 568 164 1159.004 110 150 163 568 145 1164.00 163 568 165 1294.005 140 150 163 568 146 1321.00 163 568 166 1493.006 160 150 163 568 147 1544.00 163 568 167 1700.008 225 150 163 568 148 1913.00 163 568 168 2118.00

Size d

[mm]PSI PTFE


2 63 150 163 568 342 Call 12 1∕2 75 150 163 568 343 Call 1


Size d2

[mm]D D1

[mm]D3[mm]

H[mm]

H1[mm]

H2[mm]

H3[mm]

L[mm]

L1[mm]

L2[mm]

L3[mm]

L4[mm]

Q1[mm]

2 150 UNC 5/8 121 150 279 77 134 50 45 110 120 155 150 402 1∕2 170 UNC 5/8 138 150 291 83 140 50 46 110 120 155 160 54

3 177 UNC 5/8 152 150 303 89 146 50 49 110 120 155 175 674 216 UNC 5/8 191 150 339 104 167 50 56 110 120 155 244 885 246 UNC 3/4 216 150 366 117 181 50 64 110 120 155 272 1136 273 UNC 3/4 241 150 387 130 189 50 72 110 120 155 297 1398 334 UNC 3/4 298 150 436 158 210 50 73 110 120 155 360 178

Size Q2

[mm]

22 1∕2 35

3 504 745 976 1238 169


Valves


8.26

Type 563 Aqua Butterfly Valve PVCHand lever with ratchet settings

A


16.5 Class 150, BS 1560:1989, JIS B 2220• Overall length according to EN 558-1, ISO 5752• We recommend the 10" and 12" dimensions not exceed 90 psi for the hand lever ver-

siond[mm]


USD Std. Pack

63 2 150 161 563 002 129.00 175 2 1∕2 150 161 563 003 141.00 190 3 150 161 563 004 148.00 1

110 4 150 161 563 005 167.00 1140 5 150 161 563 006 212.00 1

160 6 150 161 563 007 238.00 1225 8 150 161 563 008 372.00 1280 10 150 161 563 009 851.00 1315 12 150 161 563 010 1247.00 1

d[mm]

D[mm]

D1min.[mm]

D1max.[mm]

d2[mm]

H[mm]

H1[mm]

H2[mm]

H3[mm]

L[mm]

L1[mm]

L2[mm]

Q1[mm]

Q2[mm]

63 19 120.0 125.0 104 264 77 134 54 45 106 205 4075 19 139.7 145.0 115 277 83 140 54 46 106 205 54 3590 19 150.0 160.0 131 289 89 146 54 49 106 205 67 50

110 19 175.0 190.5 161 325 104 167 55 56 106 255 88 74140 23 210.0 215.9 187 352 117 181 55 64 106 255 113 97

160 24 241.3 241.3 215 373 130 189 55 72 106 255 139 123225 23 290.0 295.0 267 435 158 210 67 73 140 408 178 169280 25 353.0 362.0 329 554 205 264 85 113 149 408 210 207315 25 400.0 432.0 379 598 228 285 85 113 149 408 256 253

Type 563 Aqua Butterfly Valve Wafer Style PVCGear Operator

A

Size Part No. USD Std. Pack

2 161 563 042 378.00 12 1/2 161 563 043 385.00 1

3 161 563 044 394.00 14 161 563 045 408.00 16 161 563 047 486.00 1

8 161 563 048 563.00 110 161 563 049 907.00 112 161 563 050 1361.00 1


Valves


8.27

VFA02D Lever-operated butterfly valve PVCwith EPDM/SANTOPRENE™gaskets

A

• On request:· stem and guide bushing in stainless steel· bare shaft + fixing actuator bracket

d[mm]

DN[inch]

PSI Part No. USD Std. Pack

75 2 1∕2 150 VFA02D750 88.00 190 3 150 VFA02D900 98.00 1

110 4 150 VFA02D910 110.00 1125 - 140 5 150 VFA02D920 124.00 1

160 6 150 VFA02D940 150.00 1200 - 225 8 90 VFA02D960 224.00 1

d[mm]

E[mm]

Q[mm]

H[mm]

H1[mm]

H2[mm]

H3[mm]

H4[mm]

L[mm]

L1[mm]

L2[mm]

L3[mm]

75 112 46 246 76 115 55 43 46 46 70 22090 128 64 267 92 120 55 43 48 46 70 220

110 152 84 291 106 130 55 43 54 46 70 220125 - 140 177 108 321 116 150 55 43 63 46 70 250

160 212 133 356 131 169 55 43 63 46 70 250200 - 225 260 180 433 163 209 61 43 74 46 70 282


Valves


8.28

VFA11D Handwheel gear box butterfly valve PVCwith EPDM/SANTOPRENE™ gaskets

A

* with metal reduction geard[mm]

DN[inch]

PSI Part No. USD Std. Pack

75 2 1∕2 150 VFA11D750 145.00 190 3 150 VFA11D900 162.00 1

110 4 150 VFA11D910 190.00 1125 - 140 5 150 VFA11D920 195.00 1

160 6 150 VFA11D940 208.00 1* 200 - 225 8 90 VFA11D960 269.00 1

d[mm]

E[mm]

Q[mm]

H[mm]

H1[mm]

H2[mm]

H3[mm]

H4[mm]

L[mm]

L1[mm]

L2[mm]

L3[mm]

L4[mm]

D[mm]

75 112 46 240 76.0 115.0 49 43 46 71 46 92 113 16090 128 64 261 92.0 120.0 49 43 48 71 46 92 113 160

110 152 84 285 106.0 130.0 49 43 54 71 46 92 113 160125 - 140 177 108 315 116.0 150.0 49 43 63 71 46 92 113 160

160 212 133 350 131.5 169.5 49 43 69 71 46 92 113 160* 200 - 225 260 180 421 163.0 209.0 49 43 74 71 46 92 113 160

d[mm]

D1[mm]

75 142.0090 147.00

110 157.00125 - 140 177.00

160 196.50* 200 - 225 236.00


€¦ · · 2018-05-22Threaded valve ends NPT A Model: • Designed for easy installation and...

Documents

Transcript of €¦ · · 2018-05-22Threaded valve ends NPT A Model: • Designed for easy installation and...