Valid from May 1st, 2019 - Meljac
Transcript of Valid from May 1st, 2019 - Meljac
Co
ll
ec
ti
on
sCLASSIQUE ELLIPSE DAMIER ELLIOT
Solid brass3 mm
Chamfer
Visible screws
Solid brass3 mm
Straight edges
Visible screws
Solid brass3 mm
Straight edges
Non-visible screw
Solid brass3 mm
Straight edges
Non-visible screw
CANNELÉE SOL VOLUMES PIERROT
Solid brass5,5 mm
Striated surface
Non-visible screw
Solid brass10 mm/14 mm
Straight edges
Non-visible screws
Solid brass
Non-visible screws
Toughened glass4 mm
Chamfer
Visible screws
PLEXIGLASS LIMOGES LIGHTING Technical information
Plexiglass 3 mm
Chamfer
Visible screws
Limoges porcelain3 mm
Straight edges
Non-visible screws
SPOTS
Solid brass 3 mm
Straight edges
LAMPSMaterials &
finishes
General
Options
Back boxes
Mechanisms
Terms & conditions of sale
p.3 p.41
p.53p.49 p.57 p.63
p.67 p.71 p.79 p.81 p.94
p.45p.29
p.84
CLASSIQUE
DiagramsBack box
colour Size (mm) Fittings ReferenceCold
finishesWarm
finishesSpecial finishes
80x115x3
1 V&V FC3001A-A110001086,04 90,34 103,251 BPE FC3001A-A1100130
1 Inv Auto FC3001A-A11001901 BP FC3001A-A1100070 82,85 86,99 99,42
To order
Mechanisms arrangement
In the desired collection, find the product fittings and its reference.
Choose a finish on page 85 and complete the reference with the two letters.
The price is indicated in the column corresponding to the cold finishes, warm finishes and special finishes.
1
2
3
For any special requirement, please clarify and / or provide a diagram when you place an order.
1
CLASSIQUE CollectionSpecifications
General- Switches, reading lamps and sockets
- Protection index: IP20 (IP21 on request)
- Products must be installed indoors and earthed (except for low current)
- Cleaning only with a soft and dry duster, no product
Covering plate- Solid brass 3mm thick (except for shaver socket)
- With chamfer and visible screws (except for shaver socket)
- Non-visible screws in option available for some models - Please contact us
- Finishes: Nickel, Chrome, Bronze médaille, Cuivre, Doré, Canon de fusil… (p.85)
Control mechanisms- Round base - Droplet lever or push button
- Chrome-plated on cold and special finishes, golden on warm finishes
- Automatic connection by default, screw connection on request
Sizes & back boxes
Sizes (in mm) Recommended back boxesØ98 - 80x80 - 115x80 - 142x80 205x80 - 267x80 Mixed MELJAC, for dry partition and masonry
38x91 - 38x133 - 38x175 Narrow MELJAC, for masonry only
56x56 - Ø56 LEGRAND 89246, for masonry only
Oval - Hexagonal - Octagonal LEGRAND 80051, for dry partition only
Can be adapted for other retail boxes: please contact us
How to fix? The covering plate is directly screwed onto the back box.
Visible screws
Round base
Droplet lever
Chamfer
3
DiagramsBack box
colour Size (mm) Fittings ReferenceCold
finishesWarm
finishesSpecial finishes
80x80x3
1 V&V FC3008A-A110001082,85 86,99 99,421 BPE FC3008A-A1100130
1 Inv Auto FC3008A-A11001901 BP FC3008A-A1100070 79,67 83,65 95,60
80x80x3
2 V&V FC3008A-A110002195,30 100,07 114,362 BPE FC3008A-A1100141
2 Inv Auto FC3008A-A11002012 BP FC3008A-A1100081 90,59 95,12 108,71
80x80x3 1 Electronic Dimmer FC3008A-K1000020 187,03 196,38 224,44
80x80x3 1 Thermostat Leg 76720 FC3008A-K1000120 381,33 400,40 457,60
80x80x31 V&V + 1 BP FC3008A-A1100311
93,79 98,48 112,551 BP + 1 BPE FC3008A-A1100911
80x80x31 V&V + 1 Inv Auto FC3008A-A1100611 95,30 100,07 114,36
1 BP + 1 Inv Auto FC3008A-A1101061 93,79 98,48 112,55
80x80x31 V&V + 1 slot for indicator FC3008A-G2000110
86,38 90,70 103,661 BPE + 1 slot for indicator FC3008A-G20013101 BP + 1 slot for indicator FC3008A-G2000710 83,21 87,37 99,85
80x80x32 V&V + 2 slots for indicators FC3008A-G2000220
102,36 107,48 122,832 BPE + 2 slots for indicators FC3008A-G20014202 BP + 2 slots for indicators FC3008A-G2000820 97,64 102,52 117,17
80x80x3 1 BP + 1 light engraving FC3008A-L3000010 208,94 219,39 250,73
80x80x31 BP + 1 light label holder FC3008A-L2000010 208,94 219,39 250,73
1 BP + 1 label holder in glass FC3008A-L1000010 118,83 124,77 142,60
CLASSIQUE 4
Prices in euroswithout VAT
Indicators : 13,41 €Q8 with bezel or LED 3 mm
Others on requestpage 87
Please see technical detailsfrom page 86
Options :- engraving from 15 €
- treatment of some mechanisms (V&V, BP, Inv ...): from 15 €NB: contact us for this option
CLASSIQUE
DiagramsBack box
colour Size (mm) Fittings ReferenceCold
finishesWarm
finishesSpecial finishes
80x80x3 Blank FC3008A-B0000000 64,02 67,22 76,82
80x80x3 1 PC 2x10/16A+T FC3008A-B0000010 81,64 85,72 97,97
80x80x3 1 PC + Cover FC3008A-F0000010 190,74 200,28 228,89
80x80x31 DIN base FC3008A-B0001621 79,67 83,65 95,60
2 DIN bases FC3008A-B0001631 93,79 98,48 112,55
80x80x3 1 Speaker FC3008A-B0001540 107,36 112,73 128,83
80x80x3 2 Flush RCA sockets FC3008A-B0001870 133,49 140,16 160,19
80x80x31 TV outlet FC3008A-B0001700 69,27 72,73 83,12
2 TV outlets FC3008A-B0001710 73,08 76,73 87,70
80x80x31 TV-FM-SAT FC3008A-B0000570 119,26 125,22 143,11
1 TV-FM FC3008A-B0000650 108,47 113,89 130,16
80x80x3 1 HDMI FC3008A-B0001460 153,93 161,63 184,72
80x80x31 RJ45 without PE FC3008A-B0000730 95,40 100,17 114,48
2 RJ45 without PE FC3008A-B0000740 147,10 154,46 176,52
80x80x31 USB power FC3008A-B0001211 162,83 170,97 195,40
1 double USB power FC3008A-B0001221 170,32 178,84 204,38
80x80x31 Cable outlet FC3008A-B0001290 68,74 72,18 82,49
1 Cable lead-out FC3008A-B0001370 163,66 171,84 196,39
SAT
TVFM TVFM
5
Prices in euroswithout VAT
DiagramsBack box
colour Size (mm) Fittings ReferenceCold
finishesWarm
finishesSpecial finishes
Ø98x3
1 V&V FC3009A-A1100010103,71 108,90 124,451 BPE FC3009A-A1100130
1 Inv Auto FC3009A-A11001901 BP FC3009A-A1100070 100,45 105,47 120,54
Ø98x3
2 V&V FC3009A-A1100021116,37 122,19 139,642 BPE FC3009A-A1100141
2 Inv Auto FC3009A-A11002012 BP FC3009A-A1100081 111,59 117,17 133,91
Ø98x3 1 Electronic Dimmer FC3009A-K1000020 209,96 220,46 251,95
Ø98x3 1 Thermostat Leg 76720 FC3009A-K1000120 408,13 428,54 489,76
Ø98x31 V&V + 1 BP FC3009A-A1100311
114,84 120,58 137,811 BP + 1 BPE FC3009A-A1100911
Ø98x31 V&V + 1 Inv Auto FC3009A-A1100611 116,37 122,19 139,64
1 BP + 1 Inv Auto FC3009A-A1101061 114,84 120,58 137,81
Ø98x31 V&V + 1 slot for indicator FC3009A-G2000110
107,30 112,67 128,761 BPE + 1 slot for indicator FC3009A-G20013101 BP + 1 slot for indicator FC3009A-G2000710 104,06 109,26 124,87
Ø98x32 V&V + 2 slots for indicators FC3009A-G2000220
123,58 129,76 148,302 BPE + 2 slots for indicators FC3009A-G20014202 BP + 2 slots for indicators FC3009A-G2000820 118,79 124,73 142,55
Ø98x3 1 BP + 1 light engraving FC3009A-L3000010 232,31 243,93 278,77
Ø98x31 BP + 1 light label holder FC3009A-L2000010 232,31 243,93 278,77
1 BP + 1 label holder in glass FC3009A-L1000010 140,39 147,41 168,47
CLASSIQUE 6
Prices in euroswithout VAT
Indicators : 13,41 €Q8 with bezel or LED 3 mm
Others on requestpage 87
Please see technical detailsfrom page 86
Options :- engraving from 15 €
- treatment of some mechanisms (V&V, BP, Inv ...): from 15 €NB: contact us for this option
DiagramsBack box
colour Size (mm) Fittings ReferenceCold
finishesWarm
finishesSpecial finishes
Ø98x3 Blank FC3009A-B0000000 84,50 88,73 101,40
Ø98x3 1 PC 2x10/16A+T FC3009A-B0000010 117,94 123,84 141,53
Ø98x31 DIN base FC3009A-B0001621 100,45 105,47 120,54
2 DIN bases FC3009A-B0001631 114,84 120,58 137,81
Ø98x3 1 Speaker FC3009A-B0001540 128,70 135,14 154,44
Ø98x3 2 Flush RCA sockets FC3009A-B0001870 155,36 163,13 186,43
Ø98x31 TV outlet FC3009A-B0001700 89,87 94,36 107,84
2 TV outlets FC3009A-B0001710 93,76 98,45 112,51
Ø98x31 TV-FM-SAT FC3009A-B0000570 160,97 169,02 193,16
1 TV-FM FC3009A-B0000650 148,28 155,69 177,94
Ø98x3 1 HDMI FC3009A-B0001460 174,90 183,65 209,88
Ø98x31 RJ45 without PE FC3009A-B0000730 134,56 141,29 161,47
2 RJ45 without PE FC3009A-B0000740 169,49 177,96 203,39
Ø98x31 USB power FC3009A-B0001211 183,79 192,98 220,55
1 double USB power FC3009A-B0001221 191,30 200,87 229,56
Ø98x31 Cable outlet FC3009A-B0001290 89,31 93,78 107,17
1 Cable lead-out FC3009A-B0001370 186,13 195,44 223,36
CLASSIQUE 7
Prices in euroswithout VAT
DiagramsBack box
colour Size (mm) Fittings ReferenceCold
finishesWarm
finishesSpecial finishes
56x56x31 V&V FC3013A-A1100010 79,71 83,70 95,65
1 BP FC3013A-A1100070 76,45 80,27 91,74
Ø56x31 V&V FC3014A-A1100010 98,91 103,86 118,69
1 BP FC3014A-A1100070 95,66 100,44 114,79
Hexagonal
shape1 V&V FC3015A-A1100010 111,59 117,17 133,91
1 BP FC3015A-A1100070 108,35 113,77 130,02
Octagonal
shape1 V&V FC3016A-A1100010 111,59 117,17 133,91
1 BP FC3016A-A1100070 108,35 113,77 130,02
Oval
shape1 V&V FC3017A-A1100010 111,59 117,17 133,91
1 BP FC3017A-A1100070 108,35 113,77 130,02
38x91x31 V&V FC3011A-A1100010 82,85 86,99 99,42
1 BP FC3011A-A1100070 79,67 83,65 95,60
38x133x31 V&V FC3010A-A1100010 86,04 90,34 103,25
1 BP FC3010A-A1100070 82,85 86,99 99,42
38x133x32 V&V FC3010A-A1100020 98,48 103,40 118,18
2 BP FC3010A-A1100080 92,26 96,87 110,71
38x175x33 V&V FC3012A-A1100030 133,90 140,60 160,68
3 BP FC3012A-A1100090 120,01 126,01 144,01
CLASSIQUE 8
Prices in euroswithout VAT
DiagramsBack box
colour Size (mm) Fittings ReferenceCold
finishesWarm
finishesSpecial finishes
38x133x3
1 12V-mini BP chromé FC3010A-K3000070 92,39 97,01 110,87
2 12V-mini BP chromé FC3010A-K3000080 108,35 113,77 130,02
3 12V-mini BP chromé FC3010A-K3000090 124,29 130,50 149,15
4 mini BP 12V chromé FC3010A-K3000101 140,25 147,26 168,30
38x133x3
5 12V-mini BP chromé FC3010A-K3000110 156,19 164,00 187,43
6 12V-mini BP chromé FC3010A-K3000120 172,14 180,75 206,57
7 12V-mini BP chromé FC3010A-K3000130 188,06 197,46 225,67
8 12V-mini BP chromé FC3010A-K3000140 204,00 214,20 244,80
38x91x3
1 12V-mini BP chromé FC3011A-K3000070 89,63 94,11 107,56
2 12V-mini BP chromé FC3011A-K3000080 105,08 110,33 126,10
3 12V-mini BP chromé FC3011A-K3000090 120,55 126,58 144,66
4 12V-mini BP chromé FC3011A-K3000100 136,04 142,84 163,25
*See box
Ø8x4,5 mmFlat caps FZCAP0Z-K3000010
20,35 21,37 24,42Rounded cap FZCAP0Z-K3000020
CLASSIQUE
* For more aesthetics and comfort,
flat or rounded caps can be placed on buttons.
9
Please see technical detailsfrom page 86
Options :- engraving from 15 €
- treatment of some mechanisms (V&V, BP, Inv ...): from 15 €NB: contact us for this option
Prices in euroswithout VAT
CLASSIQUE
DiagramsBack box
colour Size (mm) Fittings ReferenceCold
finishesWarm finishes
Special finishes
80x115x3
1 V&V FC3001A-A1100010
86,04 90,34 103,251 BPE FC3001A-A1100130
1 Inv Auto FC3001A-A1100190
1 BP FC3001A-A1100070 82,85 86,99 99,42
80x115x3
2 V&V FC3001A-A1100020
98,48 103,40 118,182 BPE FC3001A-A1100140
2 Inv FC3001A-A1100200
2 BP FC3001A-A1100080 92,26 96,87 110,71
80x115x3
3 V&V in triangle FC3001A-A1100031
118,82 124,76 142,583 BPE FC3001A-A1100150
3 Inv Auto in triangle FC3001A-A1100211
3 BP FC3001A-A1100090 110,93 116,48 133,12
80x115x3
4 V&V FC3001A-A1100040
134,45 141,17 161,344 BPE FC3001A-A1100160
4 Inv Auto FC3001A-A1100220
4 BP FC3001A-A1100100 125,04 131,29 150,05
80x115x3 1 Electronic Dimmer FC3001A-K1000020 177,66 186,54 213,19
80x115x31 Thermostat Leg 76720 FC3001A-K1000120 390,74 410,28 468,89
1 Thermostat DANFOSS ECTEMP530 FC3001A-K1000110 742,38 779,50 890,86
80x115x3 1 Motion detector FC3001A-K1000132 350,72 368,26 420,86
10
Prices in euroswithout VAT
DiagramsBack box
colour Size (mm) Fittings ReferenceCold
finishesWarm
finishesSpecial finishes
80x115x31 V&V + 1 BP FC3001A-A1100310
96,98 101,83 116,381 BP + 1 BPE FC3001A-A1100910
80x115x31 V&V + 1 Inv Auto FC3001A-A1100610 98,48 103,40 118,18
1 BP + 1 Inv Auto FC3001A-A1101060 96,98 101,83 116,38
80x115x32 V&V + 1 BP in triangle FC3001A-A1100361
117,30 123,17 140,761 BP + 2 BPE in triangle FC3001A-A1100921
80x115x31 V&V + 2 BP in triangle FC3001A-A1100321
114,11 119,82 136,932 BP + 1 BPE in triangle FC3001A-A1100961
80x115x33 V&V + 1 BP FC3001A-A1100400
131,26 137,82 157,511 BP + 3 BPE FC3001A-A1100930
80x115x32 V&V + 2 BP FC3001A-A1100370
128,21 134,62 153,852 BP + 2 BPE FC3001A-A1100970
80x115x31 V&V + 3 BP FC3001A-A1100330
126,55 132,88 151,863 BP + 1 BPE FC3001A-A1101000
80x115x31 V&V + 1 slot for indicator FC3001A-G2000110
89,56 94,04 107,471 BPE + 1 slot for indicator FC3001A-G20013101 BP + 1 slot for indicator FC3001A-G2000710 86,38 90,70 103,66
80x115x32 V&V + 2 slots for indicators FC3001A-G2000220
105,53 110,81 126,642 BPE + 2 slots for indicators FC3001A-G20014202 BP + 2 slots for indicators FC3001A-G2000820 99,31 104,28 119,17
80x115x31 BP + 1 light engraving FC3001A-L3000010 210,92 221,47 253,10
2 BP + 2 light engravings FC3001A-L3000020 282,85 296,99 339,42
80x115x31 BP + 1 light label holder FC3001A-L2000010 223,43 234,60 268,12
2 BP + 2 light label holders FC3001A-L2000020 369,37 387,84 443,24
1 BP + 1 label holder in glass FC3001A-L1000010 125,18 131,44 150,22
CLASSIQUE 11
Indicators : 13,41 €Q8 with bezel or LED 3 mm
Others on requestpage 87
Please see technical detailsfrom page 86
Options :- engraving from 15 €
- treatment of some mechanisms (V&V, BP, Inv ...): from 15 €NB: contact us for this option
Prices in euroswithout VAT
DiagramsBack box
colour Size (mm) Fittings ReferenceCold
finishesWarm
finishesSpecial finishes
115x80x3 Blank FC3000A-B0000000 70,40 73,92 84,48
115x80x3 1 PC 2x10/16A+T FC3000A-B0000010 98,23 103,14 117,88
115x80x3 1 PC + Cover (horizontal) FC3000A-F0000010193,78 203,47 232,54
80x115x3 1 PC + Cover (vertical) FC3001A-F0000010
115x80x31 DIN base FC3000A-B0001621 82,85 86,99 99,42
2 DIN bases FC3000A-B0001631 96,98 101,83 116,38
115x80x3 1 Speaker FC3000A-B0001540 111,15 116,71 133,38
115x80x32 Flush RCA sockets FC3000A-B0001870 139,87 146,86 167,84
3 Flush RCA sockets FC3000A-B0001880 171,62 180,20 205,94
115x80x31 TV outlet FC3000A-B0001700 72,19 75,80 86,63
2 TV outlets FC3000A-B0001710 76,00 79,80 91,20
115x80x31 TV-FM-SAT FC3000A-B0000570 142,19 149,30 170,63
1 TV-FM FC3000A-B0000650 129,72 136,21 155,66
115x80x3 1 HDMI FC3000A-B0001460 160,32 168,34 192,38
115x80x31 RJ45 without PE FC3000A-B0000730 116,07 121,87 139,28
2 RJ45 without PE FC3000A-B0000740 157,20 165,06 188,64
115x80x31 USB power FC3000A-B0001211 166,02 174,32 199,22
1 double USB power FC3000A-B0001221 173,50 182,18 208,20
115x80x31 Cable outlet FC3000A-B0001290 74,96 78,71 89,95
1 Cable lead-out FC3000A-B0001370 169,88 178,37 203,86
CLASSIQUE
SAT
TVFM TVFM
12
Plinth size possible115x63x3Contact us
Prices in euroswithout VAT
Special platesBack box
colour Size (mm) Fittings ReferenceCold
finishesWarm
finishesSpecial finishes
*See box
86x160x12 LEGRAND Shaver socket with cover FC1200A-K1000200 698,08 732,98 837,70
115x80x3 Shaver socket FC3000A-B1001300 315,86 331,65 379,03
80x115x3 HAGER key card switch FC3001A-K1000180 343,18 360,34 411,82
80x80x3 Mini sensor FC3008A-K1000134 141,57 148,65 169,88
80x80x3 Subtle lighting signal FHSPZ-F180898V1A 217,97 228,86 261,56
56x56x3 Subtle lighting signal FHSPZ-F180912V1A 151,10 158,65 181,32
CLASSIQUE
Please see technical detailsfrom page 86
* For shaver socket, 1 LEGRAND 80052 back box
in dry partitionor 2 LEGRAND 80151 back
boxes in masonry
13
Prices in euroswithout VAT
Tulipe reading lampsBack box
colour Size (mm) Fittings ReferenceCold
finishesWarm
finishesSpecial finishes
80x115x3
bend 0° + 1 V&V FC3001A-M1000080
388,36 407,78 466,03bend 135° + 1 V&V FC3001A-M1000070
bend 0° + 1 BPE FC3001A-M1000200
bend 135° + 1 BPE FC3001A-M1000190
80x115x3bend 0° + 1 BP FC3001A-M1000140
368,57 387,00 442,28bend 135° + 1 BP FC3001A-M1000130
80x115x3bend 0° FC3001A-M1000020
348,77 366,21 418,52bend 135° FC3001A-M1000010
38x133x3
bend 0° + 1 V&V FC3010A-M1000080
388,36 407,78 466,03bend 135° + 1 V&V FC3010A-M1000070
bend 0° + 1 BPE FC3010A-M1000200
bend 135° + 1 BPE FC3010A-M1000190
38x133x3bend 0° + 1 BP FC3010A-M1000140
368,57 387,00 442,28bend 135° + 1 BP FC3010A-M1000130
80x115x3
bend 0° + 2 V&V FC3001A-M1000380
401,73 421,82 482,08bend 135° + 2 V&V FC3001A-M1000370
bend 0° + 2 BPE FC3001A-M1000500
bend 135° + 2 BPE FC3001A-M1000490
80x115x3bend 0° + 2 BP FC3001A-M1000440
392,62 412,25 471,14bend 135° + 2 BP FC3001A-M1000430
CLASSIQUE
Tulipe straight cone
Please see technical detailsfrom page 86
Reading lamp detail
Tulipe straight coneLED p.89
14
Prices in euroswithout VAT
Tulipe reading lampsBack box
colour Size (mm) Fittings ReferenceCold
finishesWarm
finishesSpecial finishes
80x115x3
bend 0° + 1 V&V FC3001A-M1000110
388,36 407,78 466,03bend 135° + 1 V&V FC3001A-M1000100
bend 0° + 1 BPE FC3001A-M1000230
bend 135° + 1 BPE FC3001A-M1000220
80x115x3bend 0° + 1 BP FC3001A-M1000170
368,57 387,00 442,28bend 135° + 1 BP FC3001A-M1000160
80x115x3bend 0° FC3001A-M1000050
348,77 366,21 418,52bend 135° FC3001A-M1000040
38x133x3
bend 0° + 1 V&V FC3010A-M1000110
388,36 407,78 466,03bend 135° + 1 V&V FC3010A-M1000100
bend 0° + 1 BPE FC3010A-M1000230
bend 135° + 1 BPE FC3010A-M1000220
38x133x3bend 0° + 1 BP FC3010A-M1000170
368,57 387,00 442,28bend 135° + 1 BP FC3010A-M1000160
80x115x3
bend 0° + 2 V&V FC3001A-M1000410
401,73 421,82 482,08bend 135° + 2 V&V FC3001A-M1000400
bend 0° + 2 BPE FC3001A-M1000530
bend 135° + 2 BPE FC3001A-M1000520
80x115x3bend 0° + 2 BP FC3001A-M1000470
392,62 412,25 471,14bend 135° + 2 BP FC3001A-M1000460
Please see technical detailsfrom page 86
Reading lamp detail
Tulipe beveled coneLED p.89
CLASSIQUE 15
Tulipe beveled cone
Prices in euroswithout VAT
Please see technical detailsfrom page 86
Reading lamp detail
RoseauLED p.89
Roseau reading lampsBack box
colour Size (mm) Fittings ReferenceCold
finishesWarm
finishesSpecial finishes
80x115x3
bend 0° + 1 V&V FC3001A-M2000080
337,11 353,97 404,53bend 135° + 1 V&V FC3001A-M2000070
bend 0° + 1 BPE FC3001A-M2000200
bend 135° + 1 BPE FC3001A-M2000190
80x115x3bend 0° + 1 BP FC3001A-M2000140
317,32 333,19 380,78bend 135° + 1 BP FC3001A-M2000130
80x115x3bend 0° FC3001A-M2000020
297,52 312,40 357,02bend 135° FC3001A-M2000010
38x133x3
bend 0° + 1 V&V FC3010A-M2000080
337,11 353,97 404,53bend 135° + 1 V&V FC3010A-M2000070
bend 0° + 1 BPE FC3010A-M2000200
bend 135° + 1 BPE FC3010A-M2000190
38x133x3bend 0° + 1 BP FC3010A-M2000140
317,32 333,19 380,78bend 135° + 1 BP FC3010A-M2000130
80x115x3
bend 0° + 2 V&V FC3001A-M2000380
350,48 368,00 420,58bend 135° + 2 V&V FC3001A-M2000370
bend 0° + 2 BPE FC3001A-M2000500
bend 135° + 2 BPE FC3001A-M2000490
80x115x3bend 0° + 2 BP FC3001A-M2000440
341,37 358,44 409,64bend 135° + 2 BP FC3001A-M2000430
CLASSIQUE 16
Prices in euroswithout VAT
17
Tactile reading lampsBack box
colour Size (mm) Fittings ReferenceCold
finishesWarm
finishesSpecial finishes
80x115x3 441,18 463,24 529,42bend 0° + 1 LED FC3001A-M3000020
bend 135° + 1 LED FC3001A-M3000010
38x133x3bend 0° + 1 LED FC3010A-M3000020
441,18 463,24 529,42bend 135° + 1 LED FC3010A-M3000010
CLASSIQUE
Technical informations:
Head : 67x20x19 mmLED : 3500 K,
from 47,1 to 66,9 lumensVariable luminous intensity
Prices in euroswithout VAT
CLASSIQUE
DiagramsBack box
colour Size (mm) Fittings ReferenceCold
finishesWarm
finishesSpecial finishes
80x142x3
1 V&V FC3003A-A1100010102,03 107,13 122,44
1 BPE FC3003A-A1100130
1 BP FC3003A-A1100070 100,13 105,14 120,16
80x142x3
2 V&V FC3003A-A1100020117,97 123,87 141,56
2 BPE FC3003A-A1100140
2 BP FC3003A-A1100080 114,81 120,55 137,77
80x142x3
3 V&V FC3003A-A1100030133,90 140,60 160,68
3 BPE FC3003A-A1100150
3 BP FC3003A-A1100090 120,01 126,01 144,01
80x142x3
4 V&V FC3003A-A1100040149,84 157,33 179,81
4 BPE FC3003A-A1100160
4 BP FC3003A-A1100100 140,21 147,22 168,25
80x142x3
5 V&V FC3003A-A1100050165,77 174,06 198,92
5 BPE FC3003A-A1100170
5 BP FC3003A-A1100110 153,07 160,72 183,68
80x142x3
6 V&V FC3003A-A1100060181,71 190,80 218,05
6 BPE FC3003A-A1100180
6 BP FC3003A-A1100120 162,68 170,81 195,22
18
Prices in euroswithout VAT
CLASSIQUE
DiagramsBack box
colour Size (mm) Fittings ReferenceCold
finishesWarm
finishesSpecial finishes
80x142x31 V&V + 4 BP FC3003A-A1100340
156,19 164,00 187,434 BP + 1 BPE FC3003A-A1101030
80x142x31 V&V + 5 BP FC3003A-A1100350
165,77 174,06 198,925 BP + 1 BPE FC3003A-A1101050
80x142x32 V&V + 3 BP FC3003A-A1100380
157,86 165,75 189,433 BP + 2 BPE FC3003A-A1101010
80x142x32 V&V + 4 BP FC3003A-A1100390
170,58 179,11 204,704 BP + 2 BPE FC3003A-A1101040
80x142x33 V&V + 2 BP FC3003A-A1100410
160,97 169,02 193,162 BP + 3 BPE FC3003A-A1100980
80x142x33 V&V + 3 BP FC3003A-A1100420
173,84 182,53 208,613 BP + 3 BPE FC3003A-A1101020
80x142x34 V&V + 1 BP FC3003A-A1100430
162,68 170,81 195,221 BP + 4 BPE FC3003A-A1100940
80x142x34 V&V + 2 BP FC3003A-A1100440
175,35 184,12 210,422 BP + 4 BPE FC3003A-A1100990
80x142x35 V&V + 1 BP FC3003A-A1100450
178,61 187,54 214,331 BP + 5 BPE FC3003A-A1100950
19
Please see technical detailsfrom page 86
Options :- engraving from 15 €
- treatment of some mechanisms (V&V, BP, Inv ...): from 15 €NB: contact us for this option
Prices in euroswithout VAT
DiagramsBack box
colour Size (mm) Fittings ReferenceCold
finishesWarm
finishesSpecial finishes
80x142x3
1 PC + 1 V&V FC3003A-C0010010143,47 150,64 172,16
1 PC + 1 BPE FC3003A-C0010130
1 PC + 1 BP FC3003A-C0010070 141,93 149,03 170,32
80x142x3
1 PC + 2 V&V FC3003A-C0010020160,97 169,02 193,16
1 PC + 2 BPE FC3003A-C0010140
1 PC + 2 BP FC3003A-C0010080 153,07 160,72 183,68
80x142x31 PC + 1 BP + 1 V&V FC3003A-C0010310
157,84 165,73 189,411 PC + 1 BP + 1 BPE FC3003A-C0010910
80x142x3
1 Var E + 1 V&V FC3003A-K1000310284,43 298,65 341,32
1 Var E + 1 BPE FC3003A-K1000390
1 Var E + 1 BP FC3003A-K1000350 276,23 290,04 331,48
80x142x3
1 Var E + 2 V&V FC3003A-K1000330311,41 326,98 373,69
1 Var E + 2 BPE FC3003A-K1000410
1 Var E + 2 BP FC3003A-K1000450 285,00 299,25 342,00
80x142x31 Var E + 1 BP + 1 V&V FC3003A-K1000660
303,18 318,34 363,821 Var E + 1 BP + 1 BPE FC3003A-K1000740
CLASSIQUE 20
Prices in euroswithout VAT
DiagramsBack box
colour Size (mm) Fittings ReferenceCold
finishesWarm
finishesSpecial finishes
142x80x3
1 PC + 1 V&V FC3002A-C0010010143,47 150,64 172,16
1 PC + 1 BPE FC3002A-C0010130
1 PC + 1 BP FC3002A-C0010070 141,93 149,03 170,32
142x80x3
1 PC + 2 V&V FC3002A-C0010020160,97 169,02 193,16
1 PC + 2 BPE FC3002A-C0010140
1 PC + 2 BP FC3002A-C0010080 153,07 160,72 183,68
142x80x31 PC + 1 BP + 1 V&V FC3002A-C0010310
157,84 165,73 189,411 PC + 1 BP + 1 BPE FC3002A-C0010910
142x80x3
1 Var E + 1 V&V FC3002A-K1000310284,43 298,65 341,32
1 Var E + 1 BPE FC3002A-K1000390
1 Var E + 1 BP FC3002A-K1000350 276,23 290,04 331,48
142x80x3
1 Var E + 2 V&V FC3002A-K1000330311,41 326,98 373,69
1 Var E + 2 BPE FC3002A-K1000410
1 Var E + 2 BP FC3002A-K1000450 285,00 299,25 342,00
142x80x31 Var E + 1 BP + 1 V&V FC3002A-K1000660
303,18 318,34 363,821 Var E + 1 BP + 1 BPE FC3002A-K1000740
CLASSIQUE
Please see technical detailsfrom page 86
21
Prices in euroswithout VAT
DiagramsBack box
colour Size (mm) Fittings ReferenceCold
finishesWarm
finishesSpecial finishes
142x80x3 Blank FC3002A-B0000000 78,17 82,08 93,80
142x80x3 2 PC 2x10/16A+T FC3002A-B0000020 144,68 151,91 173,62
142x80x3 2 PC + Covers (horizontal) FC3002A-F0000020318,85 334,79 382,62
80x142x3 2 PC + Covers (vertical) FC3003A-F0000020
142x80x31 PC + 1 DIN base FC3002A-B0052640 141,93 149,03 170,32
1 PC + 2 DIN bases FC3002A-B0052710 151,54 159,12 181,85
142x80x3 1 PC + 1 Speaker FC3002A-B0047320 146,05 153,35 175,26
142x80x31 PC + 1 TV outlet FC3002A-B0058240 133,46 140,13 160,15
1 PC + 2 TV outlets FC3002A-B0058310 137,36 144,23 164,83
142x80x31 PC + 1 TV-FM-SAT FC3002A-B0007340 207,24 217,60 248,69
1 PC + 1 TV-FM FC3002A-B0008880 194,55 204,28 233,46
142x80x31 PC + 1 RJ45 without PE FC3002A-B0010640 169,68 178,16 203,62
1 PC + 2 RJ45 without PE FC3002A-B0010710 199,81 209,80 239,77
142x80x31 RJ45 without PE + 1 TV-FM FC3002A-B0012880 193,51 203,19 232,21
1 RJ45 without PE + 1 TV-FM-SAT FC3002A-B0012600 220,77 231,81 264,92
142x80x31 RJ45 without PE + 1 TV outlet FC3002A-B0060760 146,55 153,88 175,86
1 RJ45 without PE + 2 TV outlets FC3002A-B0060830 149,96 157,46 179,95
142x80x32 RJ45 without PE FC3002A-B0000740 181,51 190,59 217,81
3 RJ45 without PE FC3002A-B0000750 216,02 226,82 259,22
142x80x31 PC + 1 USB power FC3002A-B0028841 188,29 197,70 225,95
1 PC + 1 double USB power FC3002A-B0028911 205,12 215,38 246,14
CLASSIQUE
TV
FM
SAT
TV
FM
TV
FM
SAT
TV
FM
22
Plinth size possible142x63x3Contact us
Prices in euroswithout VAT
CLASSIQUE
DiagramsBack box
colour Size (mm) Fittings ReferenceCold
finishesWarm
finishesSpecial finishes
205x80x3 Blank FC3004A-B0000000 135,26 142,02 162,31
205x80x3 3 PC 2x10/16A+T FC3004A-B0000030 220,93 231,98 265,12
205x80x32 PC + 1 TV outlet FC3004A-B0058250 197,90 207,80 237,48
2 PC + 2 TV outlets FC3004A-B0058320 201,80 211,89 242,16
205x80x32 PC + 1 TV-FM-SAT FC3004A-B0007350 274,27 287,98 329,12
2 PC + 1 TV-FM FC3004A-B0008890 258,34 271,26 310,01
205x80x31 PC + 1 TV outlet + 1 RJ45 without PE FC3004A-B1631560 215,14 225,90 258,17
1 PC + 2 TV outlets + 1 RJ45 without PE FC3004A-B1631770 219,03 229,98 262,84
205x80x31 PC + 1 TV-FM-SAT + 1 RJ45 without PE FC3004A-B1051950 292,61 307,24 351,13
1 PC + 1 TV-FM + 1 RJ45 without PE FC3004A-B1055590 279,73 293,72 335,68
205x80x32 PC + 1 RJ45 without PE FC3004A-B0010650 250,94 263,49 301,13
2 PC + 2 RJ45 without PE FC3004A-B0010720 279,44 293,41 335,33
205x80x32 PC + 1 USB power FC3004A-B0028851 276,60 290,43 331,92
2 PC + 1 double USB power FC3004A-B0028921 308,43 323,85 370,12
267x80x3 Blank FC3006A-B0000000 152,97 160,62 183,56
267x80x3 4 PC 2x10/16A+T FC3006A-B0000040 294,56 309,29 353,47
267x80x33 PC + 1 TV outlet FC3006A-B0058260 256,10 268,91 307,32
3 PC + 2 TV outlets FC3006A-B0058330 259,99 272,99 311,99
267x80x33 PC + 1 TV-FM-SAT FC3006A-B0007360 334,79 351,53 401,75
3 PC + 1 TV-FM FC3006A-B0008900 318,85 334,79 382,62
267x80x32 PC + 1 TV outlet + 1 RJ45 without PE FC3006A-B1631571 268,68 282,11 322,42
2 PC + 2 TV outlets + 1 RJ45 without PE FC3006A-B1631781 272,58 286,21 327,10
267x80x32 PC + 2 RJ45 without PE FC3006A-B0010720 315,39 331,16 378,47
3 PC + 1 RJ45 without PE FC3006A-B0010660 329,12 345,58 394,94
3 PC + 2 RJ45 without PE FC3006A-B0010730 357,03 374,88 428,44
Please see technical detailsfrom page 86
23
Prices in euroswithout VAT
CLASSIQUE - Export standard sockets
DiagramsBack box
colour Size (mm) Fittings ReferenceCold
finishesWarm
finishesSpecial finishes
115x80x3 1 PC Schuko FC3000A-B0000250 105,61 110,89 126,73
115x80x3 1 PC Schuko + Cover (horizontal) FC3000A-F0000250199,38 209,35 239,26
80x115x3 1 PC Schuko + Cover (vertical) FC3001A-F0000250
115x80x31 PC Unel (Schuko + Bipasso) FC3000A-B0000490 120,61 126,64 144,73
1 PC Unel + 1 PC Bipasso FC3000A-B0084980 156,31 164,13 187,57
115x80x3
1 PC Bipasso FC3000A-B0000410 106,30 111,62 127,56
2 PC Bipasso FC3000A-B0000420 144,23 151,44 173,08
3 PC Bipasso FC3000A-B0000430 182,16 191,27 218,59
80x80x31 PC Schuko FC3008A-B0000250 87,92 92,32 105,50
1 PC Schuko + Cover FC3008A-F0000250 196,33 206,15 235,60
80x80x3 1 PC Unel (Schuko + Bipasso) FC3008A-B0000490 117,57 123,45 141,08
80x80x31 PC Bipasso FC3008A-B0000410 102,58 107,71 123,10
2 PC Bipasso FC3008A-B0000420 140,50 147,53 168,60
Ø98x3 1 PC Schuko FC3009A-B0000250 123,63 129,81 148,36
Ø98x3 1 PC Unel (Schuko + Bipasso) FC3009A-B0000490 138,94 145,89 166,73
Ø98x31 PC Bipasso FC3009A-B0000410 123,63 129,81 148,36
2 PC Bipasso FC3009A-B0000420 162,33 170,45 194,80
24
Prices in euroswithout VAT
25
DiagramsBack box
colour Size (mm) Fittings ReferenceCold
finishesWarm
finishesSpecial finishes
142x80x3
1 PC Schuko + 1 V&V FC3002A-C1610010149,19 156,65 179,03
1 PC Schuko + 1 BPE FC3002A-C1610130
1 PC Schuko + 1 BP FC3002A-C1610070 147,63 155,01 177,16
142x80x3
1 PC Schuko + 2 V&V FC3002A-C1610020166,68 175,01 200,02
1 PC Schuko + 2 BPE FC3002A-C1610140
1 PC Schuko + 2 BP FC3002A-C1610080 158,78 166,72 190,54
142x80x31 PC Schuko + 1 BP + 1 V&V FC3002A-C1610310
163,58 171,76 196,301 PC Schuko + 1 BP + 1 BPE FC3002A-C1610910
80x142x3
1 PC Schuko + 1 V&V FC3003A-C1610010149,19 156,65 179,03
1 PC Schuko + 1 BPE FC3003A-C1610130
1 PC Schuko + 1 BP FC3003A-C1610070 147,63 155,01 177,16
80x142x3
1 PC Schuko + 2 V&V FC3003A-C1610020166,68 175,01 200,02
1 PC Schuko + 2 BPE FC3003A-C1610140
1 PC Schuko + 2 BP FC3003A-C1610080 158,78 166,72 190,54
CLASSIQUE - Export standard sockets
Please see technical detailsfrom page 86
Prices in euroswithout VAT
DiagramsBack box
colour Size (mm) Fittings ReferenceCold
finishesWarm
finishesSpecial finishes
142x80x3 2 PC Schuko FC3002A-B0000260 158,16 166,07 189,79
142x80x3 2 PC Schuko + Cover (horizontal) FC3002A-F0000260330,27 346,78 396,32
80x142x3 2 PC Schuko + Cover (vertical) FC3003A-F0000260
142x80x31 PC Schuko + 1 DIN base FC3002A-B0053480 147,63 155,01 177,16
1 PC Schuko + 2 DIN bases FC3002A-B0053550 157,25 165,11 188,70
142x80x3 1 PC Schuko + 1 Speaker FC3002A-B0048160 151,75 159,34 182,10
142x80x31 PC Schuko + 1 TV outlet FC3002A-B0059080 139,17 146,13 167,00
1 PC Schuko + 2 TV outlets FC3002A-B0059150 143,06 150,21 171,67
142x80x31 PC Schuko + 1 TV-FM-SAT FC3002A-B0008000 209,89 220,38 251,87
1 PC Schuko + 1 TV-FM FC3002A-B0009540 197,45 207,32 236,94
142x80x31 PC Schuko + 1 RJ45 without PE FC3002A-B0011480 175,41 184,18 210,49
1 PC Schuko + 2 RJ45 without PE FC3002A-B0011550 205,53 215,81 246,64
142x80x31 PC Schuko + 1 USB power FC3002A-B0029681 194,02 203,72 232,82
1 PC Schuko + 1 double USB power FC3002A-B0029751 209,55 220,03 251,46
142x80x31 PC Unel + 1 PC Bipasso FC3002A-B0084980 176,14 184,95 211,37
1 PC Unel + 2 PC Bipasso FC3002A-B0085050 199,56 209,54 239,47
CLASSIQUE - Export standard sockets26
SAT
TV
FM
TV
FM
Prices in euroswithout VAT
DiagramsBack box
colour Size (mm) Fittings ReferenceCold
finishesWarm
finishesSpecial finishes
205x80x3 3 PC Schuko FC3004A-B0000270 265,84 279,13 319,01
205x80x32 PC Schuko + 1 TV outlet FC3004A-B0059090 209,32 219,79 251,18
2 PC Schuko + 2 TV outlets FC3004A-B0059160 213,22 223,88 255,86
205x80x32 PC Schuko + 1 TV-FM-SAT FC3004A-B0008010 292,49 307,11 350,99
2 PC Schuko + 1 TV-FM FC3004A-B0009550 285,13 299,39 342,16
205x80x31 PC Schuko + 1 TV outlet + 1 RJ45 without PE FC3004A-B1633240 220,84 231,88 265,01
1 PC Schuko + 2 TV outlets + 1 RJ45 without PE FC3004A-B1633450 224,75 235,99 269,70
205x80x31 PC Schuko + 1 TV-FM-SAT + 1 RJ45 without PE FC3004A-B1053510 298,14 313,05 357,77
1 PC Schuko + 1 TV-FM + 1 RJ45 without PE FC3004A-B1057150 286,49 300,81 343,79
205x80x32 PC Schuko + 1 RJ45 without PE FC3004A-B0011490 262,37 275,49 314,84
2 PC Schuko + 2 RJ45 without PE FC3004A-B0011560 290,86 305,40 349,03
205x80x32 PC Schuko + 1 USB power FC3004A-B0029691 295,91 310,71 355,09
2 PC Schuko + 1 double USB power FC3004A-B0029761 312,75 328,39 375,30
267x80x3 4 PC Schuko FC3006A-B0000280 335,36 352,13 402,43
267x80x33 PC Schuko + 1 TV outlet FC3006A-B0059100 273,22 286,88 327,86
3 PC Schuko + 2 TV outlets FC3006A-B0059170 277,13 290,99 332,56
267x80x33 PC Schuko + 1 TV-FM-SAT FC3006A-B0008020 347,80 365,19 417,36
3 PC Schuko + 1 TV-FM FC3006A-B0009560 332,35 348,97 398,82
267x80x32 PC Schuko + 1 TV outlet + 1 RJ45 without PE FC3006A-B1633250 280,10 294,11 336,12
2 PC Schuko + 2 TV outlets + 1 RJ45 without PE FC3006A-B1633460 284,00 298,20 340,80
267x80x3
2 PC Schuko + 2 RJ45 without PE FC3006A-B0011560 326,80 343,14 392,16
3 PC Schuko + 1 RJ45 without PE FC3006A-B0011500 346,25 363,56 415,50
3 PC Schuko + 2 RJ45 without PE FC3006A-B0011570 374,16 392,87 448,99
CLASSIQUE - Export standard sockets 27
Please see technical detailsfrom page 86
Prices in euroswithout VAT
Visible screws
Straight edges
ELLIPSE Collection
Sizes & Back boxes
Sizes (in mm) Recommended back boxesØ98 - 80x80 - 115x80 - 142x80 Mixed MELJAC, for dry partition and masonry
38x133 Narrow MELJAC, for masonry only
Can be adapted for other retail boxes: please contact us
How to fix? The covering plate is directly screwed onto the back box.
Elongated base
Straight lever
with lighting option
Specifications
General- Switches, reading lamps and sockets
- Protection index: IP20 (IP21 on request)
- Products must be installed indoors and earthed
- Cleaning only with a soft and dry duster, no product
Covering plate- Solid brass 3mm thick
- With straight edges and visible screws
- Non-visible screws in option available for some models - please contact us
- Finishes: Nickel, Chrome, Bronze médaille, Cuivre, Doré, Canon de fusil… (p.85)
Control mechanisms- Elongated base - Straight lever or Seattle lever with lighting option or push button
- Chrome-plated on cold and special finishes, golden on warm finishes
- Automatic connection by default, screw connection on request
29
DiagramsBack box
colour Size (mm) Fittings ReferenceCold
finishesWarm
finishesSpecial finishes
80x80x3
1 V&V FE3008B-A1100010
120,22 126,23 144,261 Inv Auto FE3008B-A1100190
1 BP FE3008B-A1100070
80x80x3
2 V&V FE3008B-A1100021
172,63 181,26 207,16
2 Inv Auto FE3008B-A1100201
2 BP FE3008B-A1100081
1 V&V + 1 BP FE3008B-A1100311
1 V&V + 1 Inv Auto FE3008B-A1100611
1 BP + 1 Inv Auto FE3008B-A1101061
80x80x31 V&V + 1 slot for indicator FE3008B-G2000110
123,68 129,86 148,421 BP + 1 slot for indicator FE3008B-G2000710
80x80x32 V&V + 2 slots for indicators FE3008B-G2000220
179,53 188,51 215,442 BP + 2 slots for indicators FE3008B-G2000820
80x80x3 1 BP + 1 light engraving FE3008B-L3000010 215,08 225,83 258,10
80x80x31 BP + 1 light label holder FE3008B-L2000010 215,08 225,83 258,10
1 BP + 1 label holder in glass FE3008B-L1000010 132,09 138,69 158,51
ELLIPSE 30
Prices in euroswithout VAT
Lever detail
Straight lever
Seattle lever
JMA lever(in option)
DiagramsBack box
colour Size (mm) Fittings ReferenceCold
finishesWarm
finishesSpecial finishes
Ø98x3
1 V&V FE3009B-A1100010
138,85 145,79 166,621 Inv Auto FE3009B-A1100190
1 BP FE3009B-A1100070
Ø98x3
2 V&V FE3009B-A1100021
187,89 197,28 225,47
2 Inv Auto FE3009B-A1100201
2 BP FE3009B-A1100081
1 V&V + 1 BP FE3009B-A1100311
1 V&V + 1 Inv Auto FE3009B-A1100611
1 BP + 1 Inv Auto FE3009B-A1101061
Ø98x31 V&V + 1 slot for indicator FE3009B-G2000110
142,30 149,42 170,761 BP + 1 slot for indicator FE3009B-G2000710
Ø98x32 V&V + 2 slots for indicators FE3009B-G2000220
194,80 204,54 233,762 BP + 2 slots for indicators FE3009B-G2000820
Ø98x3 1 BP + 1 light engraving FE3009B-L3000010 233,48 245,15 280,18
Ø98x31 BP + 1 light label holder FE3009B-L2000010 233,48 245,15 280,18
1 BP + 1 label holder in glass FE3009B-L1000010 150,49 158,01 180,59
ELLIPSE
Please see technical detailsfrom page 86
Options:- engraving : from 15 €- indicators: 13,41 €
- treatment of some mechanisms (V&V, BP, Inv ...): from 15 €NB: contact us for this option
31
Collection-specific options:
- Interior lighting inside the base: 61,47 €- Polished mirrored finish on the base (bright chrome or gold): 35 €- JMA lever: 25 € additional charge
See page 89
Prices in euroswithout VAT
DiagramsBack box
colour Size (mm) Fittings ReferenceCold
finishesWarm
finishesSpecial finishes
80x115x3
1 V&V FE3001B-A1100010
122,82 128,96 147,381 Inv Auto FE3001B-A1100190
1 BP FE3001B-A1100070
80x115x3
2 V&V FE3001B-A1100020
175,21 183,97 210,252 Inv Auto FE3001B-A1100200
2 BP FE3001B-A1100080
80x115x3
3 V&V in triangle FE3001B-A1100031
228,71 240,15 274,453 Inv Auto in triangle FE3001B-A1100211
3 BP in triangle FE3001B-A1100091
80x115x3
4 V&V FE3001B-A1100040
282,18 296,29 338,624 Inv Auto FE3001B-A1100220
4 BP FE3001B-A1100100
38x91x31 V&V FE3011B-A1100010
120,22 126,23 144,261 BP FE3011B-A1100070
38x133x31 V&V FE3010B-A1100010
122,82 128,96 147,381 BP FE3010B-A1100070
38x133x32 V&V FE3010B-A1100020
175,21 183,97 210,252 BP FE3010B-A1100080
38x175x33 V&V FE3012B-A1100030
252,75 265,39 303,303 BP FE3012B-A1100090
ELLIPSE 32
Prices in euroswithout VAT
Lever detail
Straight lever
Seattle lever
JMA lever(in option)
DiagramsBack box
colour Size (mm) Fittings ReferenceCold
finishesWarm
finishesSpecial finishes
80x115x3
1 V&V + 1 BP FE3001B-A1100310
175,21 183,97 210,251 V&V + 1 Inv Auto FE3001B-A1100610
1 BP + 1 Inv Auto FE3001B-A1101060
80x115x32 V&V + 1 BP in triangle FE3001B-A1100361
228,71 240,15 274,451 V&V + 2 BP in triangle FE3001B-A1100321
80x115x3
3 V&V + 1 BP FE3009B-A1100400
282,18 296,29 338,622 V&V + 2 BP FE3001B-A1100370
1 V&V + 3 BP FE3001B-A1100330
80x115x31 V&V + 1 slot for indicator FE3001B-G2000110
126,27 132,58 151,521 BP + 1 slot for indicator FE3001B-G2000710
80x115x32 V&V + 2 slots for indicators FE3001B-G2000220
182,12 191,23 218,542 BP + 2 slots for indicators FE3001B-G2000820
80x115x31 BP + 1 light engraving FE3001B-L3000010 229,09 240,54 274,91
2 BP + 2 light engravings FE3001B-L3000020 366,18 384,49 439,42
80x115x3
1 BP + 1 light label holder FE3001B-L2000010 229,09 240,54 274,91
2 BP + 2 light label holders FE3001B-L2000020 366,18 384,49 439,42
1 BP + 1 label holder in glass FE3001B-L1000010 152,28 159,89 182,74
ELLIPSE 33
Please see technical detailsfrom page 86
Options:- engraving : from 15 €- indicators: 13,41 €
- treatment of some mechanisms (V&V, BP, Inv ...): from 15 €NB: contact us for this option
Prices in euroswithout VAT
Collection-specific options:
- Interior lighting inside the base: 61,47 €- Polished mirrored finish on the base (bright chrome or gold): 35 €- JMA lever: 25 € additional charge
See page 87
Tulipe reading lampsBack box
colour Size (mm) Fittings ReferenceCold
finishesWarm
finishesSpecial finishes
80x115x3
bend 0° + 1 V&V FE3001B-M1000080
419,89 440,88 503,87bend 135° + 1 V&V FE3001B-M1000070
bend 0° + 1 BP FE3001B-M1000140
bend 135° + 1 BP FE3001B-M1000130
80x115x3bend 0° FE3001B-M1000020
348,76 366,20 418,51
bend 135° FE3001B-M1000010
38x133x3
bend 0° + 1 V&V FE3010B-M1000080
419,89 440,88 503,87bend 135° + 1 V&V FE3010B-M1000070
bend 0° + 1 BP FE3010B-M1000140
bend 135° + 1 BP FE3010B-M1000130
80x115x3
bend 0° + 2 V&V FE3001B-M1000380
477,43 501,30 572,92bend 135° + 2 V&V FE3001B-M1000370
bend 0° + 2 BP FE3001B-M1000440
bend 135° + 2 BP FE3001B-M1000430
ELLIPSE
Please see technical detailsfrom page 86
Reading lamp detail
Tulipe straight coneLED p.89
34
Tulipe straight cone
Prices in euroswithout VAT
Tulipe reading lampsBack box
colour Size (mm) Fittings ReferenceCold
finishesWarm
finishesSpecial finishes
80x115x3
bend 0° + 1 V&V FE3001B-M1000110
419,89 440,88 503,87bend 135° + 1 V&V FE3001B-M1000100
bend 0° + 1 BP FE3001B-M1000170
bend 135° + 1 BP FE3001B-M1000160
80x115x3bend 0° FE3001B-M1000050
348,76 366,20 418,51
bend 135° FE3001B-M1000040
38x133x3
bend 0° + 1 V&V FE3010B-M1000110
419,89 440,88 503,87bend 135° + 1 V&V FE3010B-M1000100
bend 0° + 1 BP FE3010B-M1000170
bend 135° + 1 BP FE3010B-M1000160
80x115x3
bend 0° + 2 V&V FE3001B-M1000410
477,43 501,30 572,92bend 135° + 2 V&V FE3001B-M1000400
bend 0° + 2 BP FE3001B-M1000470
bend 135° + 2 BP FE3001B-M1000460
ELLIPSE
Please see technical detailsfrom page 86
Reading lamp detail
Tulipe beveled coneLED p.89
Tulipe beveled cone
35
Prices in euroswithout VAT
ELLIPSE
Please see technical detailsfrom page 86
Reading lamp detail
RoseauLED p.89
36
Roseau reading lampsBack box
colour Size (mm) Fittings ReferenceCold
finishesWarm
finishesSpecial finishes
80x115x3
bend 0° + 1 V&V FE3001B-M2000080
368,64 387,07 442,37bend 135° + 1 V&V FE3001B-M2000070
bend 0° + 1 BP FE3001B-M2000140
bend 135° + 1 BP FE3001B-M2000130
80x115x3bend 0° FE3001B-M2000020
297,51 312,39 357,01
bend 135° FE3001B-M2000010
38x133x3
bend 0° + 1 V&V FE3010B-M2000080
368,64 387,07 442,37bend 135° + 1 V&V FE3010B-M2000070
bend 0° + 1 BP FE3010B-M2000140
bend 135° + 1 BP FE3010B-M2000130
80x115x3
bend 0° + 2 V&V FE3001B-M2000380
426,18 447,49 511,42bend 135° + 2 V&V FE3001B-M2000370
bend 0° + 2 BP FE3001B-M2000440
bend 135° + 2 BP FE3001B-M2000430
Prices in euroswithout VAT
ELLIPSE
DiagramsBack box
colour Size (mm) Fittings ReferenceCold
finishesWarm
finishesSpecial finishes
80x142x33 V&V FE3003B-A1100030
252,75 265,39 303,303 BP FE3003B-A1100090
80x142x34 V&V FE3003B-A1100040
303,51 318,69 364,214BP FE3003B-A1100100
80x142x35 V&V FE3003B-A1100050
343,83 361,02 412,605 BP FE3003B-A1100110
80x142x36 V&V FE3003B-A1100060
392,87 412,51 471,446 BP FE3003B-A1100120
80x142x3 1 V&V + 4 BP FE3003B-A1100340 343,83 361,02 412,60
80x142x3 1 V&V + 5 BP FE3003B-A1100350 392,87 412,51 471,44
80x142x3 2 V&V + 3 BP FE3003B-A1100380 343,83 361,02 412,60
80x142x3 2 V&V + 4 BP FE3003B-A1100390 392,87 412,51 471,44
80x142x3 3 V&V + 2 BP FE3003B-A1100410 343,83 361,02 412,60
80x142x3 3 V&V + 3 BP FE3003B-A1100420 392,87 412,51 471,44
80x142x3 4 V&V + 1 BP FE3003B-A1100430 343,83 361,02 412,60
80x142x3 4 V&V + 2 BP FE3003B-A1100440 392,87 412,51 471,44
80x142x3 5 V&V + 1 BP FE3003B-A1100450 392,87 412,51 471,44
37
Please see technical detailsfrom page 86
Options:- engraving : from 15 €- indicators: 13,41 €
- treatment of some mechanisms (V&V, BP, Inv ...): from 15 €NB: contact us for this option
Prices in euroswithout VAT
Collection-specific options:
- Interior lighting inside the base: 61,47 €- Polished mirrored finish on the base (bright chrome or gold): 35 €- JMA lever: 25 € additional charge
See page 87
ELLIPSE
DiagramsBack box
colour Size (mm) Fittings ReferenceCold
finishesWarm
finishesSpecial finishes
80x142x31 PC + 1 V&V FE3003B-C0010010
161,20 169,26 193,441 PC + 1 BP FE3003B-C0010070
80x142x3
1 PC + 2 V&V FE3003B-C0010020
210,25 220,76 252,301 PC + 2 BP FE3003B-C0010080
1 PC + 1 BP + 1 V&V FE3003B-C0010310
80x142x31 Var E + 1 V&V FE3003B-K1000310
258,15 271,06 309,781 Var E + 1 BP FE3003B-K1000350
80x142x3
1 Var E + 2 V&V FE3003B-K1000330
307,19 322,55 368,631 Var E + 2 BP FE3003B-K1000450
1 Var E + 1 BP + 1 V&V FE3003B-K1000660
142x80x31 PC + 1 V&V FE3002B-C0010010
161,20 169,26 193,441 PC + 1 BP FE3002B-C0010070
142x80x31 PC + 2 V&V FE3002B-C0010020
210,25 220,76 252,301 PC + 2 BP FE3002B-C00100801 PC + 1 BP + 1 V&V FE3002B-C0010310
142x80x31 Var E + 1 V&V FE3002B-K1000310
258,15 271,06 309,781 Var E + 1 BP FE3002B-K1000350
142x80x31 Var E + 2 V&V FE3002B-K1000330
307,19 322,55 368,631 Var E + 2 BP FE3002B-K10004501 Var E + 1 BP + 1 V&V FE3002B-K1000660
38
Prices in euroswithout VAT
39
DiagramsBack box
colour Size (mm) Fittings ReferenceCold
finishesWarm
finishesSpecial finishes
142x80x31 PC Schuko + 1 V&V FE3002B-C1610010
166,68 175,01 200,021 PC Schuko + 1 BP FE3002B-C1610070
142x80x3
1 PC Schuko + 2 V&V FE3002B-C1610020
215,73 226,52 258,881 PC Schuko + 2 BP FE3002B-C1610080
1 PC Schuko + 1 BP + 1 V&V FE3002B-C1610310
80x142x31 PC Schuko + 1 V&V FE3003B-C1610010
166,68 175,01 200,021 PC Schuko + 1 BP FE3003B-C1610070
80x142x3
1 PC Schuko + 2 V&V FE3003B-C1610020
215,73 226,52 258,881 PC Schuko + 2 BP FE3003B-C1610080
1 PC Schuko + 1 BP + 1 V&V FE3003B-C1610310
ELLIPSE - Export standard sockets 39
Please see technical detailsfrom page 86
Options:- engraving : from 15 €- indicators: 13,41 €
- treatment of some mechanisms (V&V, BP, Inv ...): from 15 €NB: contact us for this option
Prices in euroswithout VAT
Collection-specific options:
- Interior lighting inside the base: 61,47 €- Polished mirrored finish on the base (bright chrome or gold): 35 €- JMA lever: 25 € additional charge
See page 87
DAMIER CollectionSpecifications
General- 12V or 230V Switches and sockets
- Protection index: IP20 (IP21 on request)
- Products must be installed indoors and earthed
- Cleaning only with a soft and dry duster, no product
Covering plate- Solid brass 3mm thick
- With straight edges and non-visible screws (possible with visible screws: contact us)
- Finishes: Nickel, Chrome, Bronze médaille, Cuivre, Doré, Canon de fusil… (p.85)
Control mechanisms- Square push button 14x14mm in relief or flush
- Other button shapes possible (round, oval, triangular, rectangular...)
- In the same finish as the covering plate
- Screw connection
Square
push button
Straight edges
Mounting plate
Non-visible screws
Sizes & back boxes
Sizes (in mm) Back box80x80 - 115x80 - 142x80 Mixed MELJAC, for dry partition and masonry
How to fix? The mounting plate with mechanisms screws directly onto the back box.The covering plate snaps onto the mounting plate.
41
DiagramsBack box
colour Size (mm) Fittings ReferenceCold
finishesWarm
finishesSpecial finishes
80x80x3
1 square BP* in relief FK3008D-K2000130 165,25 173,51 198,30
2 square BP* in relief FK3008D-K2000140 184,36 193,58 221,23
4 square BP* in relief FK3008D-K2000160 216,18 226,99 259,42
80x80x3
1 flush square BP* FK3008D-K2000010 165,25 173,51 198,30
2 flush square BP* FK3008D-K2000020 184,36 193,58 221,23
4 flush square BP* FK3008D-K2000040 216,18 226,99 259,42
80x115x3
1 square BP* in relief FK3001D-K2000130 168,19 176,60 201,83
2 square BP* in relief FK3001D-K2000140 187,31 196,68 224,77
3 square BP* in relief FK3001D-K2000150 203,58 213,76 244,30
4 square BP* in relief FK3001D-K2000160 219,11 230,07 262,93
80x115x3
1 flush square BP* FK3001D-K2000010 168,19 176,60 201,83
2 flush square BP* FK3001D-K2000020 187,31 196,68 224,77
3 flush square BP* FK3001D-K2000030 203,58 213,76 244,30
4 flush square BP* FK3001D-K2000040 219,11 230,07 262,93
DAMIER42
Prices in euroswithout VAT
* BP in 12V or 230V to specify
DiagramsBack box
colour Size (mm) Fittings ReferenceCold
finishesWarm
finishesSpecial finishes
80x142x3
3 square BP* in relief FK3003D-K2000150 226,60 237,93 271,92
4 square BP* in relief FK3003D-K2000160 245,70 257,99 294,84
5 square BP* in relief FK3003D-K2000170 264,81 278,05 317,77
6 square BP* in relief FK3003D-K2000180 283,91 298,11 340,69
80x142x3
3 flush square BP* FK3003D-K2000030 226,60 237,93 271,92
4 flush square BP* FK3003D-K2000040 245,70 257,99 294,84
5 flush square BP* FK3003D-K2000050 264,81 278,05 317,77
6 flush square BP* FK3003D-K2000060 283,91 298,11 340,69
80x142x31 square BP* in relief + 1 PC FK3003D-K2500130 264,50 277,73 317,40
2 square BP* in relief + 1 PC FK3003D-K2500140 283,61 297,79 340,33
80x142x31 flush square BP* + 1 PC FK3003D-K2500010 264,50 277,73 317,40
2 flush square BP* + 1 PC FK3003D-K2500020 283,61 297,79 340,33
DAMIER
Please see technical detailsfrom page 86
Option: Engraving from 15 €
43
Prices in euroswithout VAT
* BP in 12V or 230V to specify
ELLIOT CollectionSpecifications
General- Contactless switch, can be used to switch on the light, ring a bell or operate an intercom
- Choice of preseted LED lighting and sound, engraving in option
- Protection index: IP20 (IP21 on request)
- Cleaning only with a soft and dry duster, no product
Covering plate- Solid brass 3mm thick
- With straight edges and non-visible screws
- Finishes: Nickel, Chrome, Bronze médaille, Cuivre, Doré, Canon de fusil… (p.85)
Control mechanism- Contactless detection cavity in solid brass
- Polished varnished chrome-plated on cold and special finishes, polished varnished golden on warm finishes
- Management by electronic system
Contactless
detecton cavity
Straight edges
Mounting plate
Non-visible screws
Sizes & back boxes
Sizes (in mm) Back box142x80 Mixed MELJAC, for dry partition and masonry
How to fix? The mounting plate screws directly onto the back box.The covering plate fitted with the cavity and the electronic system snaps onto the mounting plate.
45
Contactless detectionBack box
colour Size (mm) Fittings ReferenceCold
finishesWarm
finishesSpecial finishes
SWITCH 80x142x3 1 cavity FI3003D-K5000010 276,72 290,56 332,06
OPTION --- --- Relief engraving FZ9999Z-GRR0001MZZ 158,70 166,64 190,44
ELLIOT 47
Prices in euroswithout VAT
CANNELÉE CollectionWavy surface
Mounting plate
Non-visible screws
49
Specifications
General- Switches, reading lamps and sockets
- Protection index: IP20
- Products must be installed indoors and earthed
- Cleaning only with a soft and dry duster, no product
Covering plate- Solid brass 5,5mm thick
- With straight edges and non-visible screws
- Different designs are possible on this mount - contact us
Control mechanisms- Elongated base - Straight lever, Seattle lever or push button
- Chrome-plated on cold and special finishes, golden on warm finishes
- Automatic connection by default, screw connection on request
Sizes & Back boxes
Sizes (in mm) Recommended back boxes80x80 - 151x80 Type LEGRAND 80051 / LEGRAND 80052
How to fix?The mounting plate with mechanisms screws directly onto the back box.The covering plate is magnetized onto the mounting plate.
Elongated base
JMA lever(in option)
CANNELÉE 50
DiagramsBack box
colour Size (mm) Fittings ReferenceCold
finishesWarm
finishesSpecial finishes
80x80x5,5 1 control element to choose (V&V, Inv Auto or BP) FW5017K-A1100010 151,85 159,45 182,22
80x80x5,5 2 control elements to choose (V&V, Inv Auto, BP) FW5017K-A1100021 225,04 236,29 270,05
80x80x5,5 1 PC 2x10/16A+T FW5017K-B0000010 104,89 110,13 125,86
80x80x5,5 1 RJ45 without PE FW5017K-B0000730 109,85 115,34 131,82
80x80x5,5 1 USB FW5017K-B0001211 105,42 110,69 126,50
80x80x5,5 1 cable outlet FW5017K-B0001290 93,94 98,64 112,73
80x80x5,5 1 TV outlet FW5017K-B0001700 97,75 102,64 117,31
80x80x5,5 Tactile reading lamp - bend 0° FW5017K-M3000020440,05 462,06 528,06
80x80x5,5 Tactile reading lamp - bend 135° FW5017K-M3000010
151x80x5,5 3 control elements to choose (V&V, Inv Auto, BP) FW5022K-A1100032 344,57 361,80 413,48
151x80x5,5 4 control elements to choose (V&V, Inv Auto, BP) FW5022K-A1100042 417,75 438,64 501,30
151x80x5,5 5 control elements to choose (V&V, Inv Auto, BP) FW5022K-A1100052 490,94 515,49 589,13
Prices in euroswithout VAT
Lever detail
Straight lever
Seattle lever
JMA lever(in option)
CANNELÉE 51
DiagramsBack box
colour Size (mm) Fittings ReferenceCold
finishesWarm
finishesSpecial finishes
151x80x5,5 2 PC 2x10/16A+T FW5022K-B0000020 177,45 186,32 212,94
151x80x5,52 RJ45 without PE FW5022K-B0000740 187,37 196,74 224,85
3 RJ45 without PE FW5022K-B0000750 218,56 229,48 262,27
151x80x5,5 1 PC + 1 control element to choose (V&V, Inv Auto or BP) FW5022K-C0010010 224,41 235,63 269,30
151x80x5,5 1 PC + 2 control elements to choose (V&V, Inv Auto, BP) FW5022K-C0010020 297,60 312,48 357,12
151x80x5,51 PC + 1 RJ45 without PE FW5022K-B0010640 182,41 191,53 218,89
1 PC + 2 RJ45 without PE FW5022K-B0010710 213,59 224,27 256,31
151x80x5,5 1 PC + 1 USB FW5022K-B0028841 177,98 186,88 213,57
151x80x5,51 PC + 1 TV outlet FW5022K-B0058240 170,32 178,83 204,38
1 PC + 2 TV outlets FW5022K-B0058310 189,40 198,87 227,28
151x80x5,5
1 control element to choose (V&V, Inv Auto, BP) + 1 tactile reading lamp - bend 0°
FW5022K-M3000140
559,58 587,56 671,501 control element to choose (V&V, Inv Auto, BP) + 1 tactile reading lamp - bend 135° FW5022K-M3000130
Please see technical detailsfrom page 86
Options:- engraving : from 15 €- indicators: 13,41 €
- treatment of some mechanisms (V&V, BP, Inv ...): from 15 €NB: contact us for this option
Prices in euroswithout VAT
Collection-specific options:
- Interior lighting inside the base: 61,47 €- Polished mirrored finish on the base (bright chrome or gold): 35 €- JMA lever: 25 € additional charge
See page 87
SOL CollectionSpecifications
General- Sockets with water-resistant cover
- Protection index: IP44
- Products must be installed indoors and earthed (except for low current)
- Cleaning only with a soft and dry duster, no product
Covering plate- Solid brass 10mm thick (14mm for international)
- With straight edges and non-visible screws
- Water-resistant cover(s)
- Finishes: Nickel, Chrome, Bronze médaille, Cuivre, Doré, Canon de fusil… (p.85)
Straight edges
Sizes & back boxes
Sizes (in mm) Back boxesØ100 - 100x100 - 180x100 - 180x200 Water-resistant MELJAC with installation template, for masonry only
How to fix? The back box + installation template set must be sealed flush with the floor.Then the installation template must be replaced by the covering plate with mechanisms and screws.
Non-visible scre
ws
when cover is closed
Water-resistant cover
53
DiagramsBack box
colour Size (mm) Fittings ReferenceCold
finishesWarm
finishesSpecial finishes
100x100x10
1 PC 2x10/16A+T FS1000D-B0000010 546,10 573,41 655,32
1 RJ45 FS1000D-B0000730 628,72 660,16 754,46
1 TV outlet FS1000D-B0001700 669,66 703,14 803,59
2 TV outlets FS1000D-B0001710 674,50 708,22 809,40
Ø100x10
1 PC 2x10/16A+T FS1003D-B0000010 546,10 573,41 655,32
1 RJ45 FS1003D-B0000730 628,72 660,16 754,46
1 TV outlet FS1003D-B0001700 669,66 703,14 803,59
2 TV outlets FS1003D-B0001710 674,51 708,24 809,41
180x100x10
2 PC 2x10/16A+T FS1001D-B0000020 886,71 931,05 1064,05
2 RJ45 FS1001D-B0000740 994,24 1043,95 1193,09
2 TV outlets FS1001D-B0001710 1131,41 1187,98 1357,69
1 PC + 1 RJ45 FS1001D-B0010640 979,81 1028,80 1175,77
1 PC + 1 TV outlet FS1001D-B0058240 1007,83 1058,22 1209,40
1 RJ45 + 1 TV outlet FS1001D-B0060760 1090,47 1144,99 1308,56
180x200x10
4 PC 2x10/16A+T FS1002D-B0000040 1773,38 1862,05 2128,06
2 PC + 2 RJ45 FS1002D-B0010720 1938,63 2035,56 2326,36
3 PC + 1 RJ45 FS1002D-B0010660 1856,25 1949,06 2227,50
2 PC + 2 TV outlets FS1002D-B0052720 2015,30 2116,07 2418,36
3 PC + 1 TV outlet FS1002D-B0052660 1894,58 1989,31 2273,50
SOL54
Prices in euroswithout VAT
SOL - Export standard sockets 55
Please see technical detailsfrom page 86
To integrate any other mechanism,
contact us.
DiagramsBack box
colour Size (mm) Fittings ReferenceCold
finishesWarm
finishesSpecial finishes
100x100x14
1 PC Schuko FS1400D-B0000250 606,58 636,91 727,90
1 RJ45 FS1400D-B0000730 692,65 727,28 831,18
1 TV outlet FS1400D-B0001700 736,63 773,46 883,96
2 TV outlets FS1400D-B0001710 740,14 777,15 888,17
Ø100x14
1 PC Schuko FS1403D-B0000250 606,58 636,91 727,90
1 RJ45 FS1403D-B0000730 692,65 727,28 831,18
1 TV outlet FS1403D-B0001700 736,63 773,46 883,96
2 TV outlets FS1403D-B0001710 740,14 777,15 888,17
180x100x14
2 PC Schuko FS1401D-B0000260 987,10 1036,46 1184,52
2 RJ45 FS1401D-B0000740 1095,76 1150,55 1314,91
2 TV outlets FS1401D-B0001710 1210,57 1271,10 1452,68
1 PC Schuko + 1 RJ45 FS1401D-B0011480 1083,65 1137,83 1300,38
1 PC Schuko + 1 TV outlet FS1401D-B0059080 1114,50 1170,23 1337,40
1 RJ45 + 1 TV outlet FS1401D-B0060760 1213,12 1273,78 1455,74
180x200x14
4 PC Schuko FS1402D-B0000280 1974,19 2072,90 2369,03
2 PC Schuko + 2 RJ45 FS1402D-B0011560 2082,85 2186,99 2499,42
3 PC Schuko + 1 RJ45 FS1402D-B0011500 2060,27 2163,28 2472,32
2 PC Schuko + 2 TV outlets FS1402D-B0059160 2031,97 2133,57 2438,36
3 PC Schuko + 1 TV outlet FS1402D-B0059100 2101,60 2206,68 2521,92Prices in euros
without VAT
VOLUMES CollectionSpecifications
General- Switches, bells, objects to put on or to fix
- Protection index: IP20
- Products must be installed indoors and earthed
- Cleaning only with a soft and dry duster, no product
Volume- Solid brass
- Non-visible screws
- Finishes: Nickel, Chrome, Bronze médaille, Cuivre, Doré, Canon de fusil… (p.85)
Control mechanisms- Round base - Droplet lever or push button
- Chrome-plated on cold and special finishes, golden on warm finishes Exception: for DOME, 1920, 1951 and rectangular bell block, BP is in the same finish as the object
- Screw connection
Sizes & back boxes
Sizes (in mm) Recommended back boxesMacaroons - 1920 - 1930 - 1951 - DomeSquare and rectangular bell blocks LEGRAND 89246, for masonry only
Skate - Palet LEGRAND 80051, for dry partition only
How to fix? The mounting plate screws directly onto the back box. Then the volume fitted mechanisms with snaps or screws onto the mounting plate. Except for 1951, 1920, rectangular bell block and macaroon, mechanisms are on the mounting plate.
Non-visible screws
Round base
Droplet lever
Non-visible screws
Mounting plate
57
BellsBack box
colour Size (mm) Fittings ReferenceCold
finishesWarm
finishesSpecial finishes
SQUARE BELL BLOCK L.48xW.48xH.17 1 BP 12V FV9000Z-A1100070 215,75 226,54 258,90
1951 L.55xW.55xH.17 1 BP 12V FV9001Z-A1100070 428,48 449,90 514,18
DOME Ø55xH.36 1 BP 12V FV9002Z-A1100070 275,27 289,03 330,32
1920 L.94xW.52xH.20 1 BP 12V FV9018Z-A1100070 998,90 1048,85 1198,68
RECTANGULAR BELL BLOCK L.70xW.46xH.17 1 BP 12V FV9004Z-A1100070 275,27 289,03 330,32
MACAROON Ø50xH.23 1 BP 12V FV9005Z-A1100070 151,68 159,26 182,02
VOLUMES
L : length W : width H : height
58
Prices in euroswithout VAT
VOLUMES
L : length W : width H : height B : base
Please see technical detailsfrom page 86
59
Volumes to fixBack box
colour Size (mm) Fittings ReferenceCold
finishesWarm
finishesSpecial finishes
1930 Ø58xH.321 V&V 230V FV9009Z-A1100010 202,70 212,84 243,24
1 BP 230V FV9009Z-A1100070 198,45 208,37 238,14
SKATE L.80xW.38xH.1101 V&V 230V FV9010Z-A1100010 633,43 665,10 760,12
1 BP 230V FV9010Z-A1100070 629,17 660,63 755,00
PALET Ø80xH.191 V&V 230V FV9003Z-A1100010 244,00 256,20 292,80
1 BP 230V FV9003Z-A1100070 240,80 252,84 288,96
Volumes to put on
PYRAMID B.105xH.60 1 BP 12V FV9006Z-A1100070 866,35 909,67 1039,62
PAPER-WEIGHT
L.70xW.42xH.36 1 BP 230V FV9007Z-A1100070 275,27 289,03 330,32
L.103xW.42xH.36 2 BP 230V FV9008Z-A1100080 334,62 351,35 401,54
L.106xW.42xH.36 3 BP 230V FV9011Z-A1100090 400,39 420,41 480,47
Prices in euroswithout VAT
VOLUMES
Pyramidal power-strip Size (mm) Fittings ReferenceCold
finishesWarm
finishesSpecial finishes
PYRAMID B: L.160 x W.160 H. 132
Power strip 2 PC 2x10/16A+T + 1 USBCable 2 m
Other combinations on request.Possibility to combine mechanisms(PC, RJ45, USB...), contact us
FV9041Z-B0028850 913,63 959,31 1096,36
Z L.268 x W.114 H. 139
Power strip 1 PC 2x10/16A+T + 1 universal outlet + 2 USB + 1 RJ45Cable 2 m
Other combinations on request.Possibility to combine mechanisms(PC, RJ45, USB...), contact us
FV9044Z-B1302010 1890,68 1985,21 2268,82
CALYPSO L.158 x W.70 H. 110
Power strip 2 PC 2x10/16A+T + 2 USB + 1 RJ45Cable 2 m
Other combinations on request.Possibility to combine mechanisms(PC, RJ45, USB...), contact us
FV9040Z-B1302010 708,47 743,89 850,16
TOTEM B : 120 x 120 H. 700
Power strip 4 PC 2x10/16A+T + 3 RJ45Cable 2 m
Other combinations on request.Possibility to combine mechanisms(PC, RJ45, USB...), contact us
FV9023Z-B0010800 945,54 992,81 1134,64
L : length W : width H : height B : base
61
Other standard socketsavailable on request
Prices in euroswithout VAT
Visible screws
Round base
Droplet lever
Chamfer
Sizes & back boxes
Sizes (in mm) Back boxesØ98 - 80x80 - 115x80 - 142x80 Mixed MELJAC, for dry partition and masonry
How to fix? The covering plate is directly screwed onto the back box.
PIERROT CollectionSpecifications
General- Switches and sockets
- Protection index: IP20 (IP21 on request)
- Products must be installed indoors and earthed
- Cleaning only with a soft and dry duster, no product
Covering plate- Toughened glass 4mm thick
- With chamfer and visible screws
- Choice of colour in the RAL colour chart
Control mechanisms- Round base - Droplet lever or push button
- Chrome-plated
- Automatic connection by default, screw connection on request
63
DiagramsBack box
colour Size (mm) Fittings ReferenceAny RAL colour
80x115x4 Blank FP6003A-B0000000 94,57
80x115x4
1 V&V FP6003A-A1100010191,951 BPE FP6003A-A1100130
1 Inv Auto FP6003A-A11001901 BP FP6003A-A1100070 188,09
80x115x4
2 V&V FP6003A-A1100020216,072 BPE FP6003A-A1100140
2 Inv Auto FP6003A-A11002002 BP FP6003A-A1100080 202,55
80x115x41 V&V + 1 BP FP6003A-A1100310
212,211 BP + 1 BPE FP6003A-A1100910
80x115x41 V&V + 1 Inv Auto FP6003A-A1100610 216,07
1 BP+ 1 Inv Auto FP6003A-A1101060 212,21
80x142x4 Blank FP6005A-B0000000 181,51
80x142x4
3 V&V in triangle FP6005A-A1100031351,423 BPE in triangle FP6005A-A1100151
3 Inv Auto in triangle FP6005A-A11002113 BP in triangle FP6005A-A1100091 340,73
80x142x4
4 V&V FP6005A-A1100040405,914 BPE FP6005A-A1100160
4 Inv Auto FP6005A-A11002204 BP FP6005A-A1100100 391,67
PIERROT64
Prices in euroswithout VAT
DiagramsBack box
colour Size (mm) Fittings ReferenceAny RAL colour
80x80x4 Blank FP6000A-B0000000 94,57
80x80x4
1 V&V FP6000A-A1100010181,511 BPE FP6000A-A1100130
1 Inv Auto FP6000A-A11001901 BP FP6000A-A1100070 177,54
80x80x4
2 V&V FP6000A-A1100021205,732 BPE FP6000A-A1100141
2 Inv Auto FP6000A-A11002012 BP FP6000A-A1100081 197,74
80x80x41 V&V + 1 BP FP6000A-A1100311
201,601 BP + 1 BPE FP6000A-A1100911
80x80x41 V&V + 1 Inv Auto FP6000A-A1100611 205,73
1 BP+ 1 Inv Auto FP6000A-A1101061 201,60
80x80x41 PC 2x10/16A+T FP4108A-B0000010 142,63
1 RJ45 FP4108A-B0000730 214,29
Ø98x4 Blank FP6001A-B0000000 138,85
Ø98x4
1 V&V FP6001A-A1100010208,471 BPE FP6001A-A1100130
1 Inv Auto FP6001A-A11001901 BP FP6001A-A1100070 204,48
Ø98x4
2 V&V FP6001A-A1100021232,722 BPE FP6001A-A1100141
2 Inv Auto FP6001A-A11002012 BP FP6001A-A1100081 224,85
Ø98x41 V&V + 1 BP FP6001A-A1100311
228,711 BP + 1 BPE FP6001A-A1100911
Ø98x41 V&V + 1 Inv Auto FP6001A-A1100611 232,72
1 BP+ 1 Inv Auto FP6001A-A1101061 228,71
PIERROT
Please see technical detailsfrom page 86
65
Other standard sockets available on request
Prices in euroswithout VAT
Sizes & back boxes
Sizes (in mm) Recommended back boxes80x80 - 80x115 - 80x142 - 115x80 - 142x80 Mixed MELJAC, for dry partition and masonry
38x91 - 38x133 Narrow MELJAC, for masonry only
How to fix?The aluminum counterplate equipped with the mechanisms screws directly onto the wall-mounted housing.The plexi cover plate is fixed onto this counterplate with 2 screws.To be fitted beforehand: the cut wallpaper and the card provided.
plexiglass productsSpecifications
General- Switches and sockets
- Protection index: IP20 (IP21 on request)
- Products must be installed indoors and earthed (except for low current)
- Cleaning only with a soft and dry duster, no product
Covering plate- Solid brass 3mm thick
- With chamfer and visible screws
- Transparent
Control mechanisms- Round base - Droplet lever or push button
- Chrome-plated
- Automatic connection by default, screw connection on request
67
Cut wallpaper
+ cardboard sheet
Wall-mounted housing
Aluminum counterplate
Plexiglass plate
DiagramsBack box
colour Size (mm) Fittings Reference Transparent
80x80x3
1 V&V FX3008A-A1100010ZZ75,851 BPE FX3008A-A1100130ZZ
1 Inv Auto FX3008A-A1100190ZZ1 BP FX3008A-A1100070ZZ 72,67
80x80x3
2 V&V FX3008A-A1100021ZZ88,302 BPE FX3008A-A1100141ZZ
2 Inv Auto FX3008A-A1100201ZZ2 BP FX3008A-A1100081ZZ 83,59
80x80x3 1 PC 2x10/16A+T FX3008A-B0000010ZZ 74,64
80x80x31 RJ45 without PE FX3008A-B0000730ZZ 88,40
2 RJ45 without PE FX3008A-B0000740ZZ 140,10
80x80x31 USB power FX3008A-B0001211ZZ 155,83
1 double USB power FX3008A-B0001221ZZ 163,32
38x91x31 V&V FX3011A-A1100010ZZ 75,85
1 BP FX3011A-A1100070ZZ 72,67
38x133x32 V&V FX3010A-A1100020ZZ 91,48
2 BP FX3010A-A1100080ZZ 85,26
PLEXIGLASS68
Other types of socketsavailable on demand
Prices in euroswithout VAT
DiagramsBack box
colour Size (mm) Fittings Reference Transparent
80x115x3
1 V&V FX3001A-A1100010ZZ79,041 BPE FX3001A-A1100130ZZ
1 Inv Auto FX3001A-A1100190ZZ1 BP FX3001A-A1100070ZZ 75,85
80x115x3
2 V&V FX3001A-A1100020ZZ91,482 BPE FX3001A-A1100140ZZ
2 Inv Auto FX3001A-A1100200ZZ2 BP FX3001A-A1100080ZZ 85,26
115x80x3 1 PC 2x10/16A+T FX3000A-B0000010ZZ 91,23
115x80x31 RJ45 without PE FX3000A-B0000730ZZ 109,07
2 RJ45 without PE FX3000A-B0000740ZZ 150,20
115x80x31 USB power FX3000A-B0001211ZZ 159,02
1 double USB power FX3000A-B0001221ZZ 166,50
142x80x3 2 PC 2x10/16A+T FX3002A-B0000020ZZ 137,68
142x80x31 PC + 2 V&V FX3002A-C0010020ZZ 153,97
1 PC + 2 BP FX3002A-C0010080ZZ 146,07
142x80x3 1 PC + 2 RJ45 without PE FX3002A-B0010710ZZ 192,81
142x80x3 1 PC + 1 double USB power FX3002A-B0028911ZZ 198,12
PLEXIGLASS
Other combinations of mechanisms on request,
Please contact us
69
Prices in euroswithout VAT
Round base
Droplet lever
Straight edges
Non-visible screws
Mounting plate
Sizes & back boxes
Sizes (in mm) Type of back box80x80 - 115x80 - 142x80 Mixed MELJAC, for dry partition and masonry
38x133 Narrow MELJAC, for masonry only
How to fix? The mounting plate with mechanisms screws directly onto the back box.The covering plate snaps onto the mounting plate.
Specifications
General- Switches
- Protection index: IP20 (IP21 on request)
- Products must be installed indoors and earthed
- Cleaning only with a soft and dry duster, no product
Covering plate- Limoges porcelain 3mm thick
- With straight edges and non-visible screws
- Porcelain glazed (white colour by default, contact us for other colours) or biscuit (white colour only)
Control mechanisms- Round base - Droplet lever or push button
- Chrome-plated
- Automatic connection by default, screw connection on request
LIMOGES CLASSIQUE Collection71
DiagramsBack box
colour Size (mm) Fittings ReferenceWhite colour
80x115x3
1 V&V FL3001D-A1100010
155,391 BPE FL3001D-A1100130
1 Inv Auto FL3001D-A1100190
1 BP FL3001D-A1100070 145,97
80x115x3
2 V&V FL3001D-A1100020
210,502 BPE FL3001D-A1100140
2 Inv Auto FL3001D-A1100200
2 BP FL3001D-A1100080 193,78
80x115x31 V&V + 1 BP FL3001D-A1100310
205,061 BP + 1 BPE FL3001D-A1100910
80x142x3
3 V&V in triangle FL3003D-A1100031
266,213 BPE in triangle FL3003D-A1100151
3 Inv Auto in triangle FL3003D-A1100211
3 BP FL3003D-A1100090 241,51
80x142x3
4 V&V FL3003D-A1100040
296,894 BPE FL3003D-A1100160
4 Inv Auto FL3003D-A1100220
4 BP FL3003D-A1100100 263,95
LIMOGES CLASSIQUE72
Prices in euroswithout VAT
DiagramsBack box
colour Size (mm) Fittings ReferenceWhite colour
80x80x3
1 V&V FL3008D-A1100010
142,241 BPE FL3008D-A1100130
1 Inv Auto FL3008D-A1100190
1 BP FL3008D-A1100070 133,87
80x80x3
2 V&V FL3008D-A1100020
194,072 BPE FL3008D-A1100140
2 Inv Auto FL3008D-A1100200
2 BP FL3008D-A1100080 177,33
80x80x31 V&V + 1 BP FL3008D-A1100310
185,701 BP + 1 BPE FL3008D-A1100910
38x133x3
1 V&V FL3010D-A1100010
155,391 BPE FL3010D-A1100130
1 Inv Auto FL3010D-A1100190
1 BP FL3010D-A1100070 145,97
38x133x3
2 V&V FL3010D-A1100020
210,502 BPE FL3010D-A1100140
2 Inv Auto FL3010D-A1100200
2 BP FL3010D-A1100080 193,78
38x133x31 V&V + 1 BP FL3010D-A1100310
205,061 BP + 1 BPE FL3010D-A1100910
LIMOGES CLASSIQUE
Please see technical detailsfrom page 86
73
Prices in euroswithout VAT
Non-visible screws
Elongated base
Straight lever
with lighting option
Straight edges
Mounting plate
Sizes & back boxes
Sizes (in mm) Type of back box80x80 - 115x80 - 142x80 Mixed MELJAC, for dry partition and masonry
38x133 Narrow MELJAC, for masonry only
How to fix? The mounting plate with mechanisms screws directly onto the back box.The covering plate snaps onto the mounting plate.
Specifications
General- Switches
- Protection index: IP20 (IP21 on request)
- Products must be installed indoors and earthed
- Cleaning only with a soft and dry duster, no product
Covering plate- Limoges porcelain 3mm thick
- With straight edges and non-visible screws
- Porcelain glazed (white colour by default, contact us for other colours) or biscuit (white colour only)
Control mechanisms- Elongated base - Straight lever or Seattle lever with lighting option or push button
- Chrome-plated
- Automatic connection by default, screw connection on request
LIMOGES ELLIPSE Collection75
DiagramsBack box
colour Size (mm) Fittings ReferenceWhite colour
80x115x3
1 V&V FM3001D-A1100010
147,281 Inv Auto FM3001D-A1100190
1 BP FM3001D-A1100070
80x115x3
2 V&V FM3001D-A1100020
202,542 Inv Auto FM3001D-A1100200
2 BP FM3001D-A1100080
1 V&V + 1 BP FM3001D-A1100310
80x142x3
3 V&V in triangle FM3003D-A1100031
270,273 Inv Auto in triangle FM3003D-A1100211
3 BP FM3003D-A1100090
80x142x3
4 V&V FM3003D-A1100040
325,524 Inv Auto FM3003D-A1100220
4 BP FM3003D-A1100100
LIMOGES ELLIPSE76
Prices in euroswithout VAT
Lever detail
Straight lever
Seattle lever
JMA lever(in option)
DiagramsBack box
colour Size (mm) Fittings ReferenceWhite colour
80x80x3
1 V&V FM3008D-A1100010
141,631 Inv Auto FM3008D-A1100190
1 BP FM3008D-A1100070
80x80x3
2 V&V FM3008D-A1100020
196,892 Inv Auto FM3008D-A1100200
2 BP FM3008D-A1100080
1 V&V + 1 BP FM3008D-A1100310
38x133x3
1 V&V FM3010D-A1100010
147,281 Inv Auto FM3010D-A1100190
1 BP FM3010D-A1100070
38x133x3
2 V&V FM3010D-A1100020
202,542 Inv Auto FM3010D-A1100200
2 BP FM3010D-A1100080
1 V&V + 1 BP FM3010D-A1100310
LIMOGES ELLIPSE 77
Please see technical detailsfrom page 86
Options:- Interior lighting inside the base: 61,47 €- Polished mirrored finish on the base (bright chrome or gold): 35 €- JMA lever: 25 € additional charge- treatment of mechanisms: from 15 €NB: contact us for this option
Prices in euroswithout VAT
SPOTS CollectionSpecifications
General- Directional or fixed recessed spotlights
- Models provided without bulb nor transformer
- Protection index: IP20 (water-resistant models: IP65)
- Cleaning only with a soft and dry duster, no product
Covering plate- Solid brass 3mm thick
- With straight edges
- Standard sizes: 80x80 and Ø85 mm
- Finishes: Nickel, Chrome, Bronze médaille, Cuivre, Doré, Canon de fusil… (p.85)
Technical specifications- LED or halogen bulb, not provided: GU5.3 (12V) or GU10 (220V) - 35W max
Straight edges
Bulb
79
SPOTS80
Prices in euroswithout VAT
Recessed spotlights Installation Size (mm) Fittings ReferenceCold
finishesWarm
finishesSpecial finishes
SQUARE Ceiling cutØ60 mm 80x80x3
Not providedBulb GU10 (230V)LED or halogen 35W max
FB3008B-Z6000010
97,80 102,69 117,36Not providedTransformer + Bulb GU5.3 (12V)LED or halogen 35W max
FB3008B-Z6000020
ROUND Ceiling cutØ60 mm Ø85x3
Not providedBulb GU10 (230V)LED or halogen 35W max
FB3119B-Z6000010
97,80 102,69 117,36Not providedTransformer + Bulb GU5.3 (12V)LED or halogen 35W max
FB3119B-Z6000020
SQUARE Ceiling cutØ70 mm 80x80x3
Not providedBulb GU10 (230V)LED or halogen 35W max
FB3008B-Z6100010
118,01 123,91 141,61Not providedTransformer + Bulb GU5.3 (12V)LED or halogen 35W max
FB3008B-Z6100020
ROUND Ceiling cutØ70 mm Ø85x3
Not providedBulb GU10 (230V)LED or halogen 35W max
FB3119B-Z6100010
118,01 123,91 141,61Not providedTransformer + Bulb GU5.3 (12V)LED or halogen 35W max
FB3119B-Z6100020
SQUARE Ceiling cutØ70 mm 84x84x5 Fixed water resistant spotlight
GU5.3 socketFB5028B-Z600ET20 118,01 123,91 141,61
ROUND Ceiling cutØ70 mm Ø84x5 Fixed water resistant spotlight
GU5.3 socketFB5029B-Z600ET20 115,13 120,89 138,16
FIXE
DDI
RECT
ION
ALW
ATER
RE
SIST
ANT
TABLE LAMPSSpecifications
General- Table lamps
- Cleaning only with a soft and dry duster, no product
Lamp base- Brass
- Built-in switch (except Arche), chrome-plated on cold and special finishes, golden on warm finishes
- Option: laser engraving (please contact us)
- Finishes: Nickel, Chrome, Bronze médaille, Cuivre, Doré, Canon de fusil… (p.85)
Lampshade- Materials: ambre tissée, lin naturel, soie
Technical specifications- Élysées, Montmartre, Opéra and Petite Arche: 42W E14 spherical halogen bulb (included)
- Concorde: 42W E14 tubular halogen bulb (included)
- Grande Arche: 77W E27 spherical halogen bulb (included)
Concorde
Élysées
Opéra
Montmartre
Arche
81
Table lampsSize
(L. x W. x H. in cm) Fittings ReferenceCold
finishesWarm
finishesSpecial finishes
ÉLYSÉES30,5x11x43
Lamp base + 1 V&V FR9014Z-A1100010 1508,47 € 1583,89 € 1810,16 €
Lampshade FR9014Z-ZMEL01.. * See below
CONCORDE12x12x39
Lamp base + 1 V&V FR9016Z-A1100010 808,70 € 849,14 € 970,44 €
Lampshade FR9016Z-ZMEL01.. * See belowELYSÉE CONCORDE
MONTMARTRE16x16x38
Lamp base + 1 V&V FR9015Z-A1100010 866,32 € 909,64 € 1039,58 €
Lampshade FR9015Z-ZMEL01.. * See below
OPÉRA22x11x34
Lamp base + 1 V&V FR9017Z-A1100010 850,61 € 893,14 € 1020,73 €
Lampshade FR9017Z-ZMEL01.. * See belowMONTMARTRE OPÉRA
GRANDE ARCHE50x22x76
Lamp base FR9022Z-Z0000000 2566,50 € 2694,83 € 3079,80 €
Lampshade FR9022Z-ZMEL01.. Contact us
PETITE ARCHE28,3x17x49,5
Lamp base FR9021Z-Z0000000 1726,37 € 1812,69 € 2071,64 €
Lampshade FR9021Z-ZMEL01.. * See belowGRANDE ARCHE PETITE ARCHE
* To completer the lampshade reference, see code below.
LAMPS
Lampshade material Reference Model ÉLYSÉE Model CONCORDE Model MONTMARTRE Model OPÉRA Model PETITE ARCHE
Ambre tissée 00 305,88 297,51 297,51 297,51 305,88
Lin naturel Noir 01345,69 337,31 331,02 361,40 345,69
Lin naturel Doré 02
Soie Blanche 10
309,03 260,84 279,69 288,08 309,03Soie Noire 11
Soie Rouge 12
Drop paper blanc 13 305,88 297,51 297,51 297,51 305,88
L : lengthW : widthH : height
83
Prices in euroswithout VAT
Meljac can carry out special finishes on demand (gilding with fine gold…) or customised.Please contact us for special request and pricing.
Materials & finishes
Material & fittings Finish & description
TFBrass Cold finishesWith chrome-plated V&V, BP, BPE and Inv
Nickel Brossé (FA)Stainless-steel aspect.
Nickel Brillant (FB)Mirror effect, tone slightly hotter than chrome.
Microbillé Nickel (FC)Sandy surface, matt varnish.
Chromé Mat (FD)Linear brushing. Bluish grey hue.
Chromé Vif (FE)Mirror with bluish sheens.
Canon de Fusil Anthracite (FF)Brushing. Dark grey tone, tend toward brown.
Canon de Fusil Sablé (FH)Granite aspect. Dark grey tone.
TC
Brass Warm finishesWith golden V&V, BP, BPE and Inv
Bronze Médaille Clair (CA)Golden bronze slightly brushed. Satiny varnish.
Bronze Médaille Clair Vernis Mat (CB)Golden bronze slightly brushed. Matt varnish.
Bronze Médaille Allemand (CC)Linear brushing, medium bronze.
Bronze Médaille Foncé (CD)Dark brown hue.
Champagne (CE)Brushed brass. Matt varnish.
Doré Patiné (CF)Gold yellow hue. Slightly brushed and satiny varnish.
Laiton Poli Verni (CG)Gold aspect mirror effect.
Care instructionsMetal-coated surfaces must be cleaned with a soft and
dry duster only, no product.
All the products must be installed indoors.
Material & fittings Finish & description
TSBrass Special finishesWith chrome-plated V&V, BP, BPE and Inv
Nickel Noir Brillant (SA)Nickel Noir Mat (SB)Chromé Martelé (SC)Chromé Vibré (SD)Microbillé Chromé (SF)Argent Patiné (SE)Cuivre Patiné (SG)Cuivre Vieilli Bouchonné (SH)Cuivre Satiné (SI)Bronze Médaille Foncé Barège Brillant (SJ)Microbillé Canon de Fusil Anthracite (SM)Ebène (SQ)
Epoxy Brass / GlassRAL couloursWith chrome-plated or golden V&V, BP, BPE and Inv (on glass : chrome-plated only)
RAL colours (RL)Selection in the RAL colour chart (K7 classic)Specify name and number
Limoges PorcelainWith chrome-plated V&V, BP, BPE and Inv
White Glazed (LA)Shiny surfaceOther colours on request. Custom designs possible
White Biscuit (LB)Matt sandblasted surfaceCustom designs possible
The collections CLASSIQUE, ELLIPSE, DAMIER, ELLIOT, CANNELÉE, SOL with water-resistant cover, VOLUMES, SPOTS and LAMPES are made in brass. The finishes are obtained by electrolysis.The PIERROT collection is in toughened extra white glass. The paint is applied at the rear and highlighted by the transparency and thickness of the glass.The LIMOGES collections are in Limoges Porcelain.
85
Direction of covering plateAll MELJAC products fix onto back boxes.The screws are supplied in the same finish as plates.By default, the axis of the cover plate screws is:- vertical for control mechanisms (V&V, BP, BPE…)- horizontal for sockets- horizontal for 80x80 and Ø98 sizes
Colour of switchesOn brass, the switches are:- chrome-plated on cold and special finishes - golden on warm finishes Mini mechanisms (12V) are chrome-plated only
Switches are chrome-plated for glass and porcelain.
Accessories in the same finish as the plate:- rotary buttons for variation- caps of mini push buttons- square push buttons from DAMIER collection- bell buttons of Dome, 1951, 1920 and rectangular block- cable lead-out (cable outputs, markings)
Light label holderTwo shapes are available. Specify when ordering: rectangular or elliptical.
Position of indicators, engravings (simple, complex, light...) and light label holderBy default, MELJAC selects the most harmonious position for fittings on the covering plate.
Care instructionsProducts must be installed indoorsCleaning only with a soft and dry duster, no product
StandardsMELJAC creations are protected in France and abroad by the copyright, the registration of models and several patents.
Probate by the norms:- NF EN 60669-1 + A1 for switches, push buttons and reversers. - NF C 61314 for power sockets. For probates in process, contact us.
Following the established standard NF C 15100, each plate has to be connected to earth. Each pattern is outfitted with a patented system of connection to earth.Stamping CE. Protection index: IP20 except for Sol collection IP44 and water resistant spotlights IP65.
NB : For any special requirement, please clarify and / or provide a diagram when you place an order.
Technical information - General86
These options are sold separately, so do not forget to specify them at the order.
Type of option Designation Reference Price
Engraving :- standard font: Helvetica uppercase height 4mm- Russian standard font: Arial Narrow 4 mm- word, figure, symbol, triangle = simple symbol- pictogram = complex symbol- triangles = per pair, on both sides of the switch (standard position: up/down)
Engraving 1 word FZ9999Z-ZGR0001M99
15,00 €Engraving 1 figure FZ9999Z-ZGR0001C99
Engraving 1 symbol FZ9999Z-ZGR0001S99
Engraving 2 triangles FZ9999Z-ZGR0002T99
Engraving 1 pictogram FZ9999Z-ZGR0001P99 22,00 €
Additional simple engraving on the same plate
Engraving 1 additional word FZ9999Z-ZGR1001M99
5,00 €Engraving 1 additional figure FZ9999Z-ZGR1001C99
Engraving 1 additional symbol FZ9999Z-ZGR1001S99
Engraving 2 additionnal triangles FZ9999Z-ZGR1002T99
Additional complex engraving on the same plate Engraving 1 additional pictogram FZ9999Z-ZGR1001P99 6,00 €
Laser engraving (contact us for existing designs, we can also create new) Laser engraving 1 word - - - Please contact us
Silkscreen printing (words, symbols, pictograms, photographs...) Silkscreen printing - - - Please contact us
Resin (specify colour) Resin engraving FZ9999Z-ZR00001M99 25,00 €
Additional resin on the same plate (specify colour) Resin engraving 1 additional word FZ9999Z-ZR10001M99 5,00 €
Indicator: Q8 model with flange- Ø 8 mm - Flange colour: polished varnished brass on warm finishes and chrome-plateds on cold finishes- Indicator colour: red, green, blue - Others on request- Indicator supply: 12, 24 or 230V (pre-wired model – separate supply)
12V - chrome-plated flange CMEQ8FA-3CXX......
13,41 €
12V - brass flange CMEQ8FA-3MXX......
24V - chrome-plated flange CMEQ8FA-3CXX......
24V - brass flange CMEQ8FA-3MXX......
230V - chrome-plated flange CMEQ8FA-XXH.......
230V - brass flange CMEQ8FA-3MXX......
LED Indicator- Ø 3 mm- LED colour : Warm white, Blue, Pure Green, Yellow Green, Yellow, Orange, Red
LED D3 30V-1mA (automation)LED D3 12V-1mALED D3 24V-1mALED D3 230V-1mA
FZLED0Z-Z00D303099FZLED1Z-Z00D301299FZLED1Z-Z00D302499FZLED2Z-Z00D323099
13,41 €
Oblong light baseLED light stripSeveral colours available
LED D3 12V-1mA for Ellipse collectionLED D3 24V-1mA for Ellipse collectionLED D3 230V-1mA for Ellipse collection
FZLED3Z-Z00D301299FZLED3Z-Z00D302499FZLED3Z-Z00D323099
61,47 €
Mirror-polished oblong baseIn bright chrome or gold for Ellipse lever switches Mirror-polished FZPLVAZ-Z0000050ZZ 35,00 €
JMA lever switch subject to additional charge With oblong base JMA lever FZPLVAZ-Z0000040ZZ 25,00 €
Additional charge for mechanism processing Processing possible on request for V&V, BP and Inv switches. Processed mechanisms FZPLVAZ-Z0000010ZZ from 15,00 €
Options 87
Prices in euroswithout VAT
MOT
MOT
88
ConnectionUse rigid cable of section 1,5 mm² stripped on 13 mm for automatic connection or 10 mm for screw connection
Mechanisms provided (since 2010) Former mechanism
Screw connection only
Automatic connection(by default)
Screw connection (on request)
Inv AutoBPE câblé en fonction va-et-vient
V&Vcâblé en fonction ON/OFF
BPcâblé en fonction ON/OFF
Type Abbreviations Symbole Designation Technical specifications
Switchesbuttons and levers are chrome-plated on cold
and special finishes, golden on warm finishes
V&V Toggle switchLever wired in one-way switch or two-way switch between 2 ignition points- automatic connection (default): 6A/250V- screw connection (on request): 6A/250V
BP Push button
Button wired in dimmer, one-way switch or two-way switch between 2 or more ignition points- automatic connection (default): 6A/250V- screw connection (on request): 2A/250VIt MUST work with a teleruptor or a dimmer in the electrical equipment box
BPE Latching push button Latching button wired in one-way switch or two-way switch between 2 ignition points- automatic connection ONLY: 6A/250V
Inv Auto Automatic Reverser
Three-position lever for roller shutters (2 positions + automatic return to 0)Possibility to control lighting- automatic connection (default): 6A/250V- screw connection (on request): 6A/250VAlso available in manual for roller shutters only (manual return to 0)
Mini BP Mini push buttonButton wired in dimmer, one-way switch or two-way switch between 2 or more ignition points- connection to weld: 12V It MUST work with a teleruptor or a dimmer in the electrical equipment box
BP carré Square push buttonButton wired in dimmer, one-way switch or two-way switch between 2 or more ignition points- screw connection ONLY: 12V or 230VIt MUST work with a teleruptor or a dimmer in the electrical equipment box
--- Motion detector Automatic switch - 240V - Model LEGRAND 67026Lighting control, manual by On/Off push buttons or automatic by infrared detection
Variation
Var E Electronic rotary dimmer SCHNEIDER NU351618 Bluetooth Model, Universal. LED Chemical, inductive or capacitive loads.
Thermostat Leg 76720 Thermostat LEGRAND 76720
Room thermostat - Model LEGRAND 76720Suitable for controlling heated ceilings and underfloor heating from 5°C to 30°C with an accuracy of +/- 0,5°C
--- --- Thermostat DANFOSS ECTEMP530Electronic thermostat - Model DANFOSS ECTEMP530 Regulation of floor heating systems from 5°C to 45°C with an accuracy of +/- 0,2°C
Lighting --- --- Light engravingLight label holder
Light ribbon supplied in 24V DC (push button supplied separately in 230V)Available in green or red - Other colour on request
Reading lamp --- ---
Reading lamp
Tactile reading lamp
Wall lamp :- Lighting (provided): 1,4 W LED supplied by a 350 mA electronic converter- Beam: 60° for Roseau model and 45°, 60° (default) or 110° for Tulipe model- Lampshade : straight or beveled cone for Tulipe model- Flexible arm : 25 cm with or without a 135° bend connection
- Lighting : LED 3500 K, from 47,1 to 66,9 lumens- Variable luminous intensity- Flexible arm : 25 cm with or without bend a 135° connection
Mechanisms 89
90
PC or PC Schuko : automatic connection
How to extract cableUse rigid cable of section 2,5 mm²
stripped on 13 mm
Renovation
Since 2016, MELJAC products are fitted with a new socket mechanism (France or Schuko)
that takes less space.
CLASSIQUE collection plates 80x80mm can be mounted on most of the existing back boxes
in renovation.
Type Abbreviations Symbole Designation Technical specifications
Power socket
PC Power socket French model 2x10/16A+T with child securitySockets are black by default, off-white on request
PC Schuko Schuko power socket German / european model 2x10/16A+T with child securitySockets are black by default, off-white on request
PC Bipasso Bipasso power socket Italian model 2x10/16A+T with child security
PC Unel Unel power socket (Schuko + Bipasso)
European model 2x10/16A+T with child securitySockets are black by default, off-white on request
Phone/Data Connection
RJ45 without PE
Data socket without white label holder
Model SCHNEIDER VDIB17726B01Category 6a STP socket for shielded solid core cable
ConnexionAudio/Vidéo
DIN base Audio connector 3-pin female base (male plug on request)
Speaker Speaker socket Model LEGRAND 67311 - Terminal with push/release connectors
Flush RCA socket Audio/video connector D-serie female base
HDMI HD audio/video connector Female/female connector
TV Connection
TV-FM TV and radio antennas socket
TV-FM-SAT TV, radio and satellite antennas socket
TV outlet TV antenna socket
IT-connection USB power USB power socket - Simple : Model LEGRAND 79391 - 5V/1100mA- Double : Model LEGRAND 67462 - 5V/2400mA
Others
--- Shaver socket Model LEGRAND 67159It can work with european, american, british and australian plugs
--- Cable outlet Specify diameter
--- Cable lead-out Specify diameter (12mm max)
SAT
TVFM
TVFM
Mechanisms 91
All MELJAC products are fixed onto back boxes. Screws are supplied in same finish as plates.
MELJAC designs its own back boxes and continues to develop new series in line with its ranges.
Type of back box Back box overview Back box colour Reference Compatible with... Overall dimensions
(L. x W. x D. in mm) Price
Mixed MELJAC back boxes for CLASSIQUE, ELLIPSE, DAMIER and PIERROT collections
Mixed models are used in masonry and dry partition with an additional kit to maintain back box into the wall.
CBBOICZ-Z080800299Plates 80x80 and Ø98 mm
71x69x50Screws interaxis 60 mm 3,67 €
CBBOICZ-Z115800199 Plates 115x80 mm 97xl69x50Screws interaxis 88 mm 3,94 €
CBBOICZ-Z142800199 Plates 142x80 mm 128x69x50Screws interaxis 117 mm 4,28 €
CBBOICZ-Z205800199 Plates 205x80 mm 190x69x50Screws interaxis 180 mm 5,35 €
CBBOICZ-Z267800199 Plates 267x80 mm 252x69x50Screws interaxis 242 mm 7,06 €
Kit for back box adaptation in DRY PARTITION - - - CBBOICZ-Z0MELKIT99Plates 80x80, Ø98, 115x80, 142x80, 205x80 and 267x80 mm
1,41 €
Partition to separate the high and low currents - - - - - - CBAENT-MEL50500099 Plates 142x80, 205x80 and 267x80 mm 0,63 €
Narrow MELJAC back boxes for CLASSIQUE and ELLIPSE collectionsDesigned for narrow plates, they may be used in masonry only and must be sealed.
CBBOICZ-Z091380199 Plates 38x91 mm 76x37x45Screws interaxis 66 mm 3,61 €
CBBOICZ-Z133380199 Plates 38x133 mm 118x37x45Screws interaxis 108 mm 3,73 €
CBBOICZ-Z175380199 Plates 38x175 mm 160x37x45Screws interaxis 150 mm 3,84 €
Back boxes
L : length W : width D : depth
92
Prices in euroswithout VAT
Type of back box Back box overview Back box colour Reference Compatible with... Overall dimensions
(L. x W. x D. in mm) Price
Back boxes for VOLUMES and CANNELÉE collections
LEGRAND 80051, for dry partition only.
LEGRAND 80052, for dry partition only.
LEGRAND 89246, for masonry only, must be sealed.
CBBBOIL-8005100099
Oval, hexagonal and octagonal plates, Skate, PaletPlates 80x80 of the Cannelée collection
Ø 67xP.50 mm 2,32 €
CBBBOIL-8005200099 Plates 151x80 of the Cannelée collection
Ø 67xP.50 mm 9,77 €
CBBBOIL-8924600099
Plates Ø 56 mm and56x56 mm, Macaroons, 1920, 1930, 1951, Dome, square and rectangular bell blocks
Ø 47xP.40 mm 6,89 €
Water-resistant MELJAC back boxes with installation template for SOL collectionTo install the products with water-resistant cover, installation templates corresponding to the final dimensions of the plates are provided.They are mounted on back boxes for masonry only and must be sealed.
The templates allow perfect placement of the back box so that the plate lies flush with the floor.
CBBOISZ-Z10D100199CBBOISZ-Z14D100199
Plates Ø 100x10 mmPlates Ø 100x14 mm
Ø 100x60Ø 100x64
5,65 €
CBBOISZ-Z10L100199CBBOISZ-Z14L100199
Plates 100x100x10 mmPlates 100x100x14 mm
100x100x60100x100x64
5,65 €
CBBOISZ-Z10L180199CBBOISZ-Z14L180199
Plates 180x100x10 mmPlates 180x100x14 mm
180x100x60180x100x64
8,54 €
CBBOISZ-Z10L180299CBBOISZ-Z14L180299
Plates 180x200x10 mmPlates 180x200x14 mm
180x200x60180x200x64
17,08 €
RenovationSome models of CLASSIQUE and ELLIPSE collections are compatible with the existing standard back boxes (please contact us).MELJAC also proposes bespoke products for an installation on other back boxes.
Back boxes 93
Prices in euroswithout VAT
I. MAIN CLAUSEAll our sales are subject to these present main conditions which prevail over any purchase under conditions, except formal derogation written and signed by us. They have been updated on 14th September 2011.
II . CONFIDENTIALITYAll designs, plans, drawings or documents which are given or sent by MELJAC remain its property ; in any case and for any reason, they cannot be transmitted to a third.
III. CONTRACT FORMATIONAn order is only accepted if MELJAC receives a written order form with headed notepaper for companies or on free paper for private person, with name and signature from the buyer.This order means the agreement to the Export Unit prices, valid during the order and also to the professional discounts which are granted to the buyer.MELJAC will not accept any modification or cancelling of the order after 48 hours. MELJAC will not take back any goods, except for a particular agreement between the buyer and MELJAC.According to the craft method of manufacturing, the delivery time is given only as information: around 4 to 6 weeks for standard manufacture. For each specific manufacturing, the delivery time will be studied individually. Under these conditions, any delay penalty will not be accepted, except for particular cases and previous writing agreement.
IV. PROPERTY RESERVEMELJAC keeps the property of sold goods up to the payment in full of the main and secondary price.The non-payment from one falling due could land one in claim of goods from MELJAC.
V. PRICES - TERMS OF PAYMENTThe prices from MELJAC are Public prices in Euro valid during the indicated time period.The shipping fees are not included in the price (prices are quoted in E.X.W (INCOTERM CCI 2000) : Ex Works).MELJAC reserves itself the right to modify at anytime its prices according to the cost of the raw material.Each definitive order should require one initial payment of 50% of the total order amount.The balance is due before before shipment or at the pick-up of the goods according to the delivery terms defined in the order confirmation.Any other terms of payment have to be written by MELJAC and undersigned the client.The terms of payment have to be accepted by the order, on risk of delaying its process.Any delay in the settlement of one previous order induces the blocking of the account and then all the shipments for the same client could be postponed up to the complete settlement of all the outstanding Export invoices.
Terms & conditions of sale94
VI. GUARANTEEA. The sold goods from MELJAC are guaranteed against each apparently faulty construction and/or working which should result from one manufacturing and design default or from raw material default, under these below conditions :- The apparent fault should be mentioned to MELJAC at reception of the goods.- The eventual functioning fault should be apparent and be immediately advised to MELJAC within 7 days from the delivery date, for the using of the goods according to its finality and its nature.Past these deadlines, the buyer cannot be accepted to engage any kind of guarantee.
B. The guarantee from MELJAC is excluded in any case :- If the fault results from the normal usury of the good or from one negligence or maintenance fault from the buyer (refer to the service sheet in each product).- If the material has been mounted or connected without having respected the using conditions.
C. The responsibilty from MELJAC is obligatory limited to the above defined guarantee and reserves and could not be in any case either inquired or pledged because of incidents or/and accidents on persons or on things in the case of abnormal or of non-conform installations and using to the finality or to the nature of our material.This responsability is limited in any case in its total amount or the amount of the involved materials.
D. The dimensions and weight of our models are given here only as information.
E. MELJAC reserves itself the right to modify constantly the characteristics and fittings of its models.
VII. RESOLUTIVE CLAUSE WITH FULL RIGHTIn non-execution of their obligations by one or two parties, the contract ruled by the present general conditions of sale should be terminated with full right for the benefit of the other party, without prejudice of damages and interests which could be claimed by the declining party. This termination will become operative 14 days after having sent a giving notice by registered mail by acknowledgment if it remains without reply.
VIII. ATTRIBUTION OF JURISDICTIONEach litigation regarding the conclusion, execution, interpretation of the contract sales terms which could not be resolved amicably, should be submitted to the exclusive competence of the Commercial Court of Paris, even in case of resort with guaranteed or with plurality of defendants.
IX. ACCEPTANCE AND OBJECTIONThe present general conditions of sale constitute an element of contract.Customers from MELJAC are considered to have accepted these conditions, except any reserve which are mentioned on the order.
Terms & conditions of sale
Distributed by:
Showroom & Headquarter3 rue de la Procession
75015 PARISFRANCE
: +33 (0)1 40 61 08 43 : +33 (0)1 40 61 08 46 : [email protected]
Showroom Rhone-Alpes Region5 rue Charles DULLIN
69002 LYONFRANCE
: +33 (0)4 78 38 37 72 : +33 (0)4 78 38 09 64 : [email protected]
Export Department : +33 (0)1 47 34 21 42 : +33 (0)1 47 34 21 46 : [email protected]
www.mel jac .com
Find us on @maisonmel jac