VAKUUM- UND GREIFERTECHNIK MEHR ALS GREIFEN … · 2020. 8. 3. · Vacuum Bellows Suction Cups -...
Transcript of VAKUUM- UND GREIFERTECHNIK MEHR ALS GREIFEN … · 2020. 8. 3. · Vacuum Bellows Suction Cups -...
AUTOMATION®
VAKUUM- UND GREIFERTECHNIK
MEHR ALS GREIFEN
217www.mf-automation.com
Vakuumbalgensauger - Serien
Vacuum Bellows Suction Cups - Series
Serie Balgensauger „M-Flex2“
Serie Balgensauger „M-Flex2“
Serie Balgensauger „M-Flex“ Anschlussteile
Serie Balgensauger „ZP“
Serie Balgensauger „VPA-LB“
Serie Balgensauger „PJG“
Serie Balgensauger „VPA-B“
Serie Balgensauger „VPA-W“
Serie Balgensauger „ESV“
Serie Balgensauger „VPU“
Serie Balgensauger „VASB“
Serie Balgensauger „PBG“
Serie Balgensauger „FGA-AM2-blau“
Serie Balgensauger „FKM“
Serie Balgensauger „PU“
Series Bellows Suction Cups „M-Flex2“
Series Bellows Suction Cups „M-Flex-2“
Series Bellows Suction Cups „M-Flex“ Accessories
Series Bellows Suction Cups „ZP“
Series Bellows Suction Cups „VPA-LB“
Series Bellows Suction Cups „PJG“
Series Bellows Suction Cups „VPA-B“
Series Bellows Suction Cups „VPA-W“
Series Bellows Suction Cups „ESV“
Series Bellows Suction Cups „VPU“
Series Bellows Suction Cups „VASB“
Series Bellows Suction Cups „PBG“
Series Bellows Suction Cups „FGA-AM2-blau“
Series Bellows Suction Cups „FKM“
Series Bellows Suction Cups „PU“
11 - 30 mm
40 - 70 mm
7 - 53 mm
2 - 20 mm
4 - 80 mm
10 - 50 mm
10 - 50 mm
20 - 40 mm
20 - 50 mm
8 - 125 mm
115 - 155 mm
5 - 78 mm
8 - 22 mm
9 - 18 mm
218
219
220-222
223-226
227
228-229
230
231
232
233
234
235-236
237
238
239
BenennungGröße/Size
/dia.ØSeite/Page
Appelation
Hinweis:Unser gesamtes Sortiment finden Sie unter www.mf-automation.com
Note:Our entire range can be found at www.mf-automation.com
AUTOMATION®
VAKUUM- UND GREIFERTECHNIK
MEHR ALS GREIFEN
218 www.mf-automation.com
Vakuumbalgensauger - Serien „M-Flex2“ Ø 11 - 30 mm
Vacuum Bellows „M-Flex2“ dia. 11 - 30 mm Suction Cups - Series
M-Flex - Vakuumsauger sind aus einem speziell entwickelten Polyurethan hergestellt und daher hoch verschleißfest.
M-Flex - Vacuum Suction Cups are made of a special developedPolyurethan and therefore a highly resistant to wear.
Der Balgen und die Sauglippe haben unterschiedliche Shorehärten: die weiche, flexible Sauglippe mit 30° Shore A hat die Farbe dunkelblau und bietet eine optimale Abdichtungauch bei unebenen Oberflächen.Der Balgen mit 2 Falten mit 60° Shore A hat die Farbe gelb,ist positionsstabil und erlaubt eine Hubbewegung zum Höhenausgleich oder zur Vereinzelung von Werkstücken.
The folds and the suction lips have different Shore hard-ness: the soft suction lip with 30° Shore A has the color dark blue and provides an optimal seal also on uneven surfaces.The folds area with 2 fold has 60° Shore A and the color yellow, these part has a stable position and allows a stroke motion for height compensation or for separation of workpieces.
Gute Beständigkeit gegen Öl, Fett und Kraftstoffe Good resistance against oil, grease and fuelsOptimale Ozonbeständigkeit Optimal ozone restistance
Ausgezeichnete Abdruckfreiheit Excellent anti-marking
Silikonfrei Silicone freeArbeitstemperatur von +10° C bis + 50° C Working temperature from +10° C to + 50° CFür die Vakuumsauger von Ø 11 bis Ø 50 mm gibt es viele Anschlussvarianten, u.a. auch mit integriertem Edel-stahlfilter bzw. Drossel-Rückschlagventil
For the suction cups from Ø 11 to Ø 50 mm, there aremany variants of fittings, also with integrated stainless steel filter respectively throttle check valve
Bevorzugter Einsatz für die Industriezweige bzw. Materialien:Verpackung - Kartonagen - Kunststoffe - Glas - Bleche
Preferred use for industries respectly materials:packaging - cardboard - plastics - glass - sheet metal
Ø d2
Ø d2
Ø d1
Ø d1
H
H
Ø d
Ø D
Ø D
Ø d
B20.011.010.PU30/60
B20.016.010.PU30/60
B20.021.010.PU30/60
B20.026.010.PU30/60
B20.030.010.PU30/60
11
16
20,5
26
30
5,8
8,8
11,5
11,5
13,5
4
4
5
5
5
9
9
12
15
16
17
19
14,7
19
21
3,5
5,5
5
8
8
0,7
1,0
1,8
2,8
4,2
Art. No.
Art. No.
Ø D
Ø D
Ø d
Ø d
Ø d1
Ø d1
Ø d2
Ø d1
H
H
Gewicht/
gWeight
Gewicht/
gWeight
Hub/
mmStroke
Hub/
mmStroke
Anschlussteile/siehe Seite 220
Fittings:
see page 220
Anschlussteile/
siehe Seite 220 Fittings:
see page 220
Pos. 1: AT.0134 - AGM5, Pos. 2: AT.0705 - IG M5 Pos. 3: 00 08 03 - AG 1/8"
AT.0250 - AG 1/8"-IG M5 (SH=3,5)Pos. 4: AT.0802 - AT.0802.FS - AT.0802.V = AG 1/8"/IG M5 (SH: 1,8 mm) Pos. 5: AT.0803 - AT.0803.FS - AT.0803.V = AG 1/8"/IG M5 (SH: 4,5 mm)Pos. 6: AT.0819.FS = AG 1/8" (SH: 4 mm)Pos. 7: AT.0809 - AT.0809.FS - AT.0809.V = IG 1/8" (SH: 8 mm)Pos. 8: AT.0820.FS = IG 1/8" (SH: 10 mm)
AUTOMATION®
VAKUUM- UND GREIFERTECHNIK
MEHR ALS GREIFEN
219www.mf-automation.com
Vakuumbalgensauger - Serien „M-Flex2“ Ø 40 - 70 mm
Vacuum Bellows „M-Flex2“ dia. 40 - 70 mm Suction Cups - Series
Ø 6,5Ø 10,5
Ø 22Ø 27,5
Ø 17,8 Ø 22
Ø 40 Ø 50
28,5
36
Art. No.: B20.040.010.* Art. No.: B20.050.010.*
Hub/ : 9 mmGewicht/ : 11 g
StrokeWeight
Hub/ : 14 mmGewicht/ : 21 g
StrokeWeight
Anschlussteile/siehe Seite/ 220 - 221
Fittings:see page
Anschlussteile/siehe Seite/ 221/222
Fittings:see page
Pos. 9: AT.0814 - AT.0814.FS - AT.0814.V = AG 1/8" (SH: 6 mm)
Pos. 10: AT.0810 - AT.0810.FS - AT.0810.V = IG 1/8" (SH: 8 mm)
Pos. 11: AT.0811 - AT.0811.FS - AT.0811.V = IG 1/8" (SH: 12 mm)
Pos. 12: AT0823 - AT 0823.FS - AT.0823.V = AG 1/4" (SH: 5,8 mm)
Pos. 13: AT.0826.FS = AG 1/4" (SH: 7 mm)
Pos. 14: AT0827.FS = IG 1/4" (SH: 11,5 mm
Pos. 15: AT.0812 - AT.0812.FS - AT.0812.V = IG 1/8" (SH: 4,5 mm)
Pos. 16: AT.0813 - AT.0813.FS - AT.0813.V = IG 1/8" (SH: 9 mm)
Pos. 17: AT.0824 - AT.0824.FS - AT.0824.V = AG 1/4" (SH: 8 mm)
Pos. 18: AT.0836.FS = IG 1/4" (SH: 10 mm)
Pos. 19: AT.0828 - AT.0828.FS - AT.0828.V = AG 3/8" (SH: 8 mm)
Pos. 20: AT.0830.FS = AG 3/8" (SH: 6 mm)
Pos. 21: AT.0831.FS = IG 3/8" (SH: 15 mm)
G 3/8"
Ø 38,5
Ø 31
Ø 70
31
48,5 58
,5
vulkanisiertvulcanized
SW 8
Art. No.: B22.070.010.*
Hub/ : 22 mmGewicht/ : 60 g
StrokeWeight
*Material:Polyurethan 30°/60° Shore
*Material:Polyurethan 30°/60° Shore
*Material:Polyurethan 30°/60° Shore
AUTOMATION®
VAKUUM- UND GREIFERTECHNIK
MEHR ALS GREIFEN
220 www.mf-automation.com
Vakuumbalgensauger - Serien „M-Flex“ Anschlussteile
Vacuum Bellows „M-Flex“ Fittings Suction Cups - Series
AT.0134 - AG M5M 5
Ø 2,8
54 17
SW 8
Ø 5,2
AT.0705 - IG M5Messing/brass
M 5
65
7
13
SW 8+
0,5
Ø 2,2
00 08 03 - AG 1/8"
85
7
20
G 1/8”
Ø 3
SW 12
Ø 5,5
G 1/8" G 1/8"
M 5 M 5
Ø 5,8Ø 5,8Ø 8
Ø 8Ø 15Ø 15
5,2
5,2
6 7
1,8
4,5
13
16,7
SW 13SW 13
1. Standard
2. AT.0802.FS: mit Filtersieb
3. AT.0802.V: mit Strömungsventil
AT.0802: 1. Standard
2. AT.0803.FS: mit Filtersieb
3. AT.0803.V: mit Strömungsventil
AT.0803:
1. Standard
2. AT.0802.FS: with mesh filter
3. AT.0802.V: with check valve
AT.0802: 1. Standard
2. AT.0803.FS: with mesh filter
3. AT.0803.V: with check valve
AT.0803:
Material: Aluminium Material: Aluminium
Material: Aluminium
Material: Aluminium
G 1/8"
15
64
5
Ø 141. it Filtersieb AT.0819.FS: m
1. AT.0819.FS: with mesh filter
Ø 5,8
Ø 8
SW 12
Ø 5,8
G 1/8
Ø 8
Ø 17
5,2
8
13,2
1. Standard
2. AT.0809.FS: mit Filtersieb
3. AT.0809.V: mit Strömungsventil
AT.0809:
1. Standard
2. AT.0809.FS: with mesh filter
3. AT.0809.V: with check valve
AT.0809:
SW 14
Pos. 1
Pos. 4
Pos. 6
Pos. 8
Pos. 5
Pos. 7
Pos. 9
Pos. 2 Pos. 3
G 1/8"
Ø 14
Ø 5,8
Ø 8
15
510
SW 12
1. it Filtersieb AT.0820.FS: m
1. AT.0820.FS: with mesh filter
Material: Aluminium
Material: Aluminium
G 1/8"
19,8
76
6,8
Ø 20
SW 17
1. Standard
2. AT.0814.FS: mit Filtersieb
3. AT.0814.V: mit Strömungsventil
AT.0814:
1. Standard
2. AT.0814.FS: with mesh filter
3. AT.0814.V: with check valve
AT.0814: Ø 8Ø 11
Ø 4,8
AUTOMATION®
VAKUUM- UND GREIFERTECHNIK
MEHR ALS GREIFEN
221www.mf-automation.com
Vakuumbalgensauger - Serien „M-Flex“ Anschlussteile
Vacuum Bellows „M-Flex“ Fittings Suction Cups - Series
G 1/8
Ø 8
Ø 11
6,8
8
14,8
1. Standard
2. AT.0810.FS: mit Filtersieb
3. AT.0810.V: mit Strömungsventil
AT.0810:
1. Standard
2. AT.0810.FS: with mesh filter
3. AT.0810.V: with check
AT.0810:
SW 17
Ø 20G 1/8
Ø 8
Ø 11
6,7
12
18,7
1. Standard
2. AT.0811.FS: mit Filtersieb
AT.0811:
1. Standard
2. AT.0811.FS: with mesh filter
AT.0811:
SW 17
Ø 20
Material: Aluminium
Material: Aluminium
Material: Aluminium
Material: Aluminium
Material: Aluminium
Material: Aluminium
Material: Aluminium
Material: Aluminium
Pos. 10
Pos. 12
Pos. 14
Pos. 16 Pos. 17
Pos. 15
Pos. 11
Pos. 13
G 1/4"
Ø 8
Ø 11
Ø 19
21,5
6,7
5,8
9 SW 17
1. Standard
2. AT.0823.FS: mit Filtersieb
3. AT.0823.V: mit Strömungsventil
AT.0823:
1. Standard
2. AT.0823.FS: with mesh filter
3. AT.0823.V: with check valve
AT.0823:
1. it Filtersieb AT.0826.FS: m
1. AT.0826.FS: with mesh filter
G 1/4"
87
7
22
Ø 21
SW 19
Ø 7,6
Ø 11
G 1/4"
Ø 21
Ø 7,6
Ø 11
18,5
711
,5
SW 19
1. it Filtersieb AT.0827.FS: m
1. AT.0827.FS: with mesh filter
G 1/8"
Ø 12
Ø 15
20
69,
54,
5
Ø 16
Ø 28
SW 14
1. Standard
2. AT.0812.FS: mit Filtersieb
3. AT.0812.V: mit Strömungsventil
AT.0812:
1. Standard
2. AT.0812.FS: with mesh filter
3. AT.0812.V: with check valve
AT.0812:
G 1/8"
Ø 12
Ø 15
18,5 9
9,5
Ø 28
SW 24
1. Standard
2. AT.0813.FS: mit Filtersieb
3. AT.0813.V: mit Strömungsventil
AT.0813:
1. Standard
2. AT.0813.FS: with mesh filter
3. AT.0813.V: with check valve
AT.0813:
G 1/4"
26,5
9,5
89
1. Standard
2. AT.0824.FS: mit Filtersieb
3. AT.0824.V: mit Strömungsventil
AT.0824:
1. Standard
2. AT.0824.FS: with mesh filter
3. AT.0824.V: with check valve
AT.0824: Ø 12
Ø 15
Ø 28
SW 24
AUTOMATION®
VAKUUM- UND GREIFERTECHNIK
MEHR ALS GREIFEN
222 www.mf-automation.com
Vakuumbalgensauger - Serien „M-Flex“ Anschlussteile
Vacuum Bellows „M-Flex“ Fittings Suction Cups - Series
Pos. 18
Pos. 20
Pos. 19
Pos. 21
G 1/4"
Ø 27
Ø
Ø 15
19,5
9,5
10
SW 22
1. it Filtersieb AT.0836.FS: m
1. AT.0836.FS: with mesh filter
Material: Aluminium
Material: Aluminium
G 1/8"
G 3/8"
Ø 12Ø 15Ø 30
27,5
108
9,5
109
625
24
159
SW 27
1. Standard
2. AT.0828.FS: mit Filtersieb
3. AT.0828.V: mit Strömungsventil
AT.0828:
1. Standard
2. AT.0828.FS: with mesh filter
3. AT.0828.V: with check valve
AT.0828:
G 3/8" G 3/8"
Ø 26 Ø 28
Ø 11,5 Ø 11,5Ø 15 Ø 15
SW 24
1. it Filtersieb AT.0830.FS: m 1. it Filtersieb AT.0831.FS: m
1. AT.0830.FS: with mesh filter 1. AT.0831.FS: with mesh filter
SW 24
Material: Aluminium
Material: Aluminium
AG G1/8"- IG M5
AG G1/4" AG G3/8"IG 1/8" IG G1/4" IG G3/8"
IG M5
AG 1/8"
Hinweis/Note: SH = Schlüsselhöhe/ (z.B. AT.0802 = 1,8 mm, AT.0803 = 4,5 mm usw./ )
Key heightetc.
AUTOMATION®
VAKUUM- UND GREIFERTECHNIK
MEHR ALS GREIFEN
223www.mf-automation.com
Vakuumbalgensauger - Serien „ZP“ Ø 7 - 15 mm
Vacuum Bellows „ZP“ dia. 7 - 15 mm Suction Cups - Series
Art. No.: B10.007.001.*
Art. No.: B10.012.006.*Ring (Standard) Art. No.: B10.015.016.*Ring (Standard)
Art. No.: B10.012.006.* Art. No.: B10.015.016.*
Art. No.: B10.009.004.*
Hub/ : 2,0 mmGewicht/ : 0,4 g
StrokeWeight
Hub/ : 3,5mmGewicht/ : 3,1 g
StrokeWeight
Hub/ : 5,5mmGewicht/ : 3,5 g
StrokeWeight
Hub/ : 2,0 mmGewicht/ : 0,4 g
StrokeWeight
*Material:NBR schwarz/Silikon transparent
black
*Material:NBR schwarz/Silikon transparent
black*Material:NBR schwarz/Silikon transparent
black
*Material:NBR schwarz/Silikon transparent
black
Anschlussteile/FittingsAT.0705 - IG M5AT.0134 - AG M5
Anschlussteile/FittingsAT.0624 - AG M5AT.0539 - AG 1/8"
Anschlussteile/FittingsAT.0624 - AG M5AT.0539 - AG 1/8"
Anschlussteile/FittingsAT.0705 - IG M5AT.0134 - AG M5
Ø 7 Ø 7
Ø 3,2 Ø 4
Ø 2,5 Ø 2,5
Ø 6 Ø 8
Ø 7 Ø 9
13 13
2 2
4 4
Ø 13Ø 13
Ø 4Ø 4
Ø 4 Ø 4
Ø 5,5 Ø 8,7
Ø 10 Ø 13
Ø 12 Ø 15
Ø 13,8 Ø 19
5 4
16 18,5
5,5
7,5
mit Haltering/with holding ring mit Haltering/with holding ring
ohne Haltering/without holding ring
ohne Haltering/without holding ring
HalteringHolding ring
HalteringHolding ring
AUTOMATION®
VAKUUM- UND GREIFERTECHNIK
MEHR ALS GREIFEN
224 www.mf-automation.com
Vakuumbalgensauger - Serien „ZP“ Ø 18 - 22 mm
Vacuum Bellows „ZP“ dia. 18 - 22 mm Suction Cups - Series
Art. No.: B10.018.007.*Ring (Standard)
Art. No.: B10.022.005.*Ring (Standard)
Art. No.: B10.018.007.*
Art. No.: B10.022.005.*
Hub/ : 6,5mmGewicht/ : 3,6 g
StrokeWeight
Hub/ : 8,5mmGewicht/ : 5,4 g
StrokeWeight
*Material:NBR schwarz/Silikon transparent
black
*Material:NBR schwarz/Silikon transparent
black
Anschlussteile/FittingsAT.0624 - AG M5AT.0539 - AG 1/8"
Anschlussteile/FittingsAT.0624 - AG M5AT.0539 - AG 1/8"
Ø 13
Ø 15
Ø 4
Ø 4
Ø 4
Ø 4
Ø 10
Ø 12,5
Ø 16
Ø 20
Ø 18
Ø 22
Ø 21
Ø 25
4
420
23,5
8,5
10,5
mit Haltering/with holding ring
mit Haltering/with holding ring
ohne Haltering/without holding ring
ohne Haltering/without holding ring
HalteringHolding ring
HalteringHolding ring
AUTOMATION®
VAKUUM- UND GREIFERTECHNIK
MEHR ALS GREIFEN
225www.mf-automation.com
Vakuumbalgensauger - Serien „ZP“ Ø 28 - 34 mm
Vacuum Bellows „ZP“ dia. 28 - 34 mm Suction Cups - Series
Art. No.: B10.028.003.*Ring (Standard)
Art. No.: B10.034.001.*Ring (Standard)
Art. No.: B10.028.003.*
Art. No.: B10.034.001.*
Hub/ : 9,0 mmGewicht/ : 5,8 g
StrokeWeight
Hub/ : 13 mmGewicht/ : 9,4 g
StrokeWeight
*Material:NBR schwarz/Silikon transparent
black
*Material:NBR schwarz/Silikon transparent
black
Anschlussteile/FittingsAT.0624 - AG M5AT.0539 - AG 1/8"
Anschlussteile/FittingsAT.0624 - AG M5AT.0539 - AG 1/8"
Ø 15
Ø 5
Ø 4
Ø 15,6
Ø 25
Ø 27,5
Ø 28
4
24
29
10,5
14
4
mit Haltering/with holding ring
mit Haltering/with holding ring
ohne Haltering/without holding ring
ohne Haltering/without holding ring
HalteringHolding ring
Ø 15
Ø 5
Ø 4
Ø 18,8
Ø 32
Ø 34
Ø 37
HalteringHolding ring
AUTOMATION®
VAKUUM- UND GREIFERTECHNIK
MEHR ALS GREIFEN
226 www.mf-automation.com
Vakuumbalgensauger - Serien „ZP“ Ø 43 - 53 mm
Vacuum Bellows „ZP“ dia. 43 - 53 mm Suction Cups - Series
Art. No.: B10.043.004.*Ring (Standard)
Art. No.: B10.053.003.*Ring (Standard)
Art. No.: B10.043.004.*
Art. No.: B10.053.003.*
Hub/ : 15 mmGewicht/ : 14 g
StrokeWeight
Hub/ : 18 mmGewicht/ : 18 g
StrokeWeight
*Material:NBR schwarz/Silikon transparent
black
*Material:NBR schwarz/Silikon transparent
black
Anschlussteile/FittingsAT.0132 - AG 1/8"AT.0850 - AG 1/4"
Anschlussteile/FittingsAT.0132 - AG 1/8"AT.0850 - AG 1/4"
3438
1616
44
mit Haltering/with holding ring
mit Haltering/with holding ring
ohne Haltering/without holding ring
ohne Haltering/without holding ring
Ø 18
Ø 18
Ø 9
Ø 9
Ø 7
Ø 7
Ø 24,4
Ø 32,4
Ø 40
Ø 51
Ø 43
Ø 53
Ø 48
Ø 57
Haltering/Holding ring
Haltering/Holding ring
AUTOMATION®
VAKUUM- UND GREIFERTECHNIK
MEHR ALS GREIFEN
227www.mf-automation.com
Vakuumbalgensauger - Serien „VPA-LB“ Ø 2 - 20 mm
Vacuum Bellows „VPA-LB“ dia. 2 - 20 mm Suction Cups - Series
d 1d 1 d 1
d 4d 5
d 4
d 5
d 3 d 3
d 2 d 2
DD
H
H
20
5
9,5
h 2 h
2
h 1 h 1
Vorteile: passend auf alle Hubzylinder der Serie „VZP“ - druckluftbetrieben
Advantage: for all lifting cylinders of the series „VZP“ - pneumatically operated
Darstellung AVersion A
Darstellung BVersion B
Darstellung CVersion C
Ø 20
Ø 6
Ø 12
Ø 4,5
1
2
3
4
5
6
7
A
A
A
B
B
B
C
2,5
4,0
6
8
10
15
12
12
12
12
12
12
14,5
14,5
15
15
15,5
17,5
2,5
2,5
2,5
2,5
2,5
2,5
4,5
4,5
4,5
4,5
4,5
4,5
2
3
4
5
5
6
6
1,0
1,0
1,0
1,0
1,0
1,0
2,0
T
T
T
T
T
T
K
4,5
4,5
5
5
5
5
7,5
7,5
9
9
9
9
1,0
1,6
2
2
3
3
1,0
1,6
3,2
4
3,5
5,5
B10.002.001.*
B10.004.003.*
B10.006.001.*
B10.008.001.*
B10.010.003.*
B10.015.001.*
B10.020.006.*
Ø Dmm
Hmm
h1mm
h2mm
Gewicht/
gWeightØ d1
mmØ d2mm
Ø d3mm
Ø d4mm
Ø d5mmDa
rstellung/
Version
Pos. Art. No.
Art. No.Hubzylinder
**
Lifting Cylinder
Hub/
mmStroke
Maße siehe oben/Dimensions see above
Federstößel auf Anfrage!Spring Levelers on request!
M 5
Ø 2,5
3,5
4
Ø 4
Ø 6
2
12
SW 8
SW 2,5~4 tief/deep
Anschlussteile/Fittings
AT.0536 - AG M5 AT.0613 - AG M5
M 5
Ø 2,5
55
6
16
Ø 6,5
Ø 5,5
SW 8
Ø 5,7
AT.0003 - AG 1/8"
Ø 6,5
Ø 6
6 20
3
6,5
7,5
G 1/8"
Ø 4
SW 14
für/ Pos. 1 - 6for für/ Pos. 1 - 6forfür/ Pos. 7for
* Material:NBR schwarz/ 50° ShoreSilikon transparent 50° Shore
black
Passend für Hubzylinder „VZP“
Suitable for Lifting Cylinder „VZP“
**
**
AUTOMATION®
VAKUUM- UND GREIFERTECHNIK
MEHR ALS GREIFEN
228 www.mf-automation.com
Vakuumbalgensauger - Serien „PJG“ Ø 4 - 25 mm
Vacuum Bellows „PJG“ dia. 4 - 25 mm Suction Cups - Series
Ø 4
Ø 4,6 Ø 4,6
Ø 4,6 Ø 4,6
Ø 4 Ø 4
Ø 6
Ø 7,8 Ø 7,8
Ø 10,8 Ø 10,8
Ø 6 Ø 6
Ø 4 Ø 6 Ø 8
Ø 10Ø 15
Ø 20
Ø 25
Ø 9,8
Ø11,8Ø15,8
Ø 21Ø 26
Ø 8,2
Ø 11 Ø 12
Ø 15 Ø 17,5
Ø 7,5 Ø 8
9,2
9,5
11
13
15,5
9 9
4,2
4
2 2
4
2
4,5
3,5
3,5
4,5
4,5
3
3,3
5,5
6,5
Ø 2,2 Ø 3,3 Ø 5,3
Ø 6,8Ø 9,7
Ø 13Ø 14,5
Art. No.: B10.004.004.* (PJG-4)
Art. No.: B10.010.002.* (PJG-10)
Art. No.: B10.020.008.* (PJG-20) Art. No.: B10.025.005.* (PJG-25)
Art. No.: B10.015.002.* (PJG-15)
Art. No.: B10.006.002.* (PJG-6) Art. No.: B10.008.003.* (PJG-8)Hub/ 2,0 mmGewicht/ : 0,3 g
Stroke:Weight
Hub/ : 2,5 mmGewicht/ : 0,6 g
StrokeWeight
Hub/ : 3,5 mmGewicht/ : 1,6 g
StrokeWeight
Hub/ : 4,0 mmGewicht/ : 3,0 g
StrokeWeight
Hub/ : 3,5 mmGewicht/ : 0,9 g
StrokeWeight
Hub/ : 2,5 mmGewicht/ : 0,4 g
StrokeWeight
Hub/ : 2,5 mmGewicht/ : 0,5 g
StrokeWeight
Vorteil/ : Niedrige Ausführung und positionsstabil
Advantage
Low version and position stable
Pos. 1
Pos. 4 Pos. 5
Pos. 6 Pos. 7
Pos. 2 Pos. 3
Anschlussteil/ AT.0536 - AG M5Fitting
Anschlussteile/AT.0094 - AG M5AT.0063 - AG 1/8"
Fittings
für/ Pos. 1 - 3:for
für/ Pos. 4 - 7for
*Material für/ Pos. 1 - 7: NBR schwarz/ Silikon transparent und/ antistatisch/
forblack
and antistatic
AUTOMATION®
VAKUUM- UND GREIFERTECHNIK
MEHR ALS GREIFEN
229www.mf-automation.com
Vakuumbalgensauger - Serien „PJG“ Ø 30 - 80 mm
Vacuum Bellows „PJG“ dia. 30 - 80 mm Suction Cups - Series
Ø 5,8 Ø 5,8 Ø 5,8
Ø 10,8 Ø 10,8 Ø 10,8
Ø 30
Ø 40Ø 45
Ø 55 Ø 68
Ø 12,5
Ø 12,5 Ø 12,5
Ø 32 Ø 44
Ø 52 Ø 61
Ø 50 Ø 60
Ø 70 Ø 80
Ø 53 Ø 62
Ø 74 Ø 82
Ø 19,8
Ø 7,8
Ø 35 Ø 40
Ø 20 Ø 25 Ø 30
18 18 18
7 7 7
7
7
20 20
21 2122
,5
23,5
23,5
9
9,5
9,5
8
7 7
Ø 16 Ø 20,5 Ø 25
Art. No.: B10.030.008.* (PJG30)
Art. No.: B10.050.008.* (PJG50)
Art. No.: B11.070.003.M10.* (PJG70) Art. No.: B11.080.003.M10.* (PJG80)
Art. No.: B11.060.003. * (PJG60)M10.
Art. No.: B10.035.002.* (PJG35) Art. No.: B10.040.004.* (PJG40)
Hub/ : 5,0 mmGewicht/ : 4,8 g
StrokeWeight
Hub/ : 5,5 mmGewicht/ : 20,4 g
StrokeWeight
Hub/ : 4,0 mmGewicht/ : 60 g
StrokeWeight
Hub/ : 4,0 mmGewicht/ : 75 g
StrokeWeight
Hub/ : 4,0 mmGewicht/ : 37 g
StrokeWeight
Hub/ : 5,0 mmGewicht/ : 7,2 g
StrokeWeight
Hub/ : 5,0 mmGewicht/ : 10,6 g
StrokeWeight
M10x1,25
M10x1,25 M10x1,25
Alu
Alu Alu
*Material Pos. 1-7:für/for NBR schwarz/Silikon transparent(Pos. 5-7 auf Anfrage/Silikon antistatisch )
black
only on request/antistatic
Anschlussteil/00 08 60 - AG 1/8"Messing/
Fitting
brass
Anschlussteile/ AT.0702 - AG M5, AT.0312 - AG M6, AT.0538 - AG 1/8"Fittings für/ Pos. 1 - 3:for
Pos. 1
Pos. 4
Pos. 2
Pos. 5
Pos. 3
Pos. 6 Pos. 7
Vorteil/ : Niedrige Ausführung und positionsstabil
Advantage
Low version and position stable
AUTOMATION®
VAKUUM- UND GREIFERTECHNIK
MEHR ALS GREIFEN
230 www.mf-automation.com
Vakuumbalgensauger - Serien „VPA-B“ Ø 10 - 50 mm
Vacuum Bellows „VPA-B“ dia. 10 - 50 mm Suction Cups - Series
Ø 10
Ø 10
Ø 5
Ø 4
16
1,0
*Material: NBR schwarz/Silikon transparentSilikon antistatisch/Silikon -40° - +300° C (SHT)
black
antistatic
Art. No.: B10.010.001.*
Abstütz-rippen
Abstütz-rippen
Cleats
Cleats
Hub/ : 4,0 mmGewicht/ : 1,0 g
StrokeWeight
Ø d1
Ø 6
Ø d
Ø D
H
h1
B10.020.003.*
B10.030.004.*
B10.040.001.*
B10,050.004.*
20
30
40
50
11
14
18
21
15
17
25
30
19
23
30
32
2,0
2,5
4,0
4,0
6,0
8,0
9,5
11,0
2
4
10
13
AT.0312
AT.0312
AT.0312
AT.0312
AT.0006
AT.0006
AT.0538
AT.0538
AT.0702
AT.0702
AT.0702
AT.0702
Art. No. Ø D Ø d Ø d1 H h1 Hub/Stroke
Anschlussteile/FittingsGewicht/Weight
mm mm mm mm mm mm g AG M6 AG M5AG 1/8"
*Material: Silikon transparentNBR schwarz/Silikon antistatisch/
blackantistatic
AT.0039 - AG M4
M 4
Ø 5
Ø 6
3,5
2,58,
5
2,5
SW 2durchgehend/right through
Messing vernickelt/nickled brassMessing vernickelt/nickled brassAT.0134 - AG M5
M 5
Ø 2,8
54 17
SW 8
Ø 5,2
AT.0705 - IG M5Alu
M 5
65
7
13
SW 8
+0,
5
Ø 2,2
Anschlussteile/Fittings
AUTOMATION®
VAKUUM- UND GREIFERTECHNIK
MEHR ALS GREIFEN
231www.mf-automation.com
Vakuumbalgensauger - Serien „VPA-W“ Ø 10 - 50 mm
Vacuum Bellows „VPA-W“ dia. 10 - 50 mm Suction Cups - Series
Ø 10
Ø 4
Ø 6
Ø 10
15
4
*Material: NBR schwarz/Silikon transparent
black
Art. No.: B40.010.001.*
Hub/ : 3,5 mmGewicht/ : 2,0 g
StrokeWeight
Ø d1
Ø 6
Ø d
Ø D
H
B40.020.002.*
B40.030.002.*
B40.040.005.*
B40,050.002.*
20
30
40
50
14
20
27
32
15
18
25
30
25
39
45
55
9
15
17
22
2
6
14
24
AT.0312
AT.0312
AT.0312
AT.0312
AT.0006
AT.0006
AT.0538
AT.0538
AT.0702
AT.0702
AT.0702
AT.0702
Art. No. Ø D Ø d Ø d1 H Hub/Stroke
Anschlussteile/FittingsGewicht/Weight
mm mm mm mm mm g AG M6 AG M5AG 1/8"
*Material: NBR schwarz/Silikon transparent
black
AT.0039 - AG M4
M 4
Ø 5
Ø 6
3,5
2,58,
5
2,5
SW 2durchgehend/right through
Messing vernickelt/nickled brass Messing vernickelt/nickled brassAT.0134 - AG M5
M 5
Ø 2,8
54 17
SW 8
Ø 5,2
AT.0705 - IG M5Alu
M 5
65
7
13
SW 8
+0,
5
Ø 2,2
Anschlussteile/Fittings
AUTOMATION®
VAKUUM- UND GREIFERTECHNIK
MEHR ALS GREIFEN
232 www.mf-automation.com
Vakuumbalgensauger - Serien „ESV“ Ø 20 - 40 mm
Vacuum Bellows „ESV“ dia. 20 - 40 mm Suction Cups - Series
Ø d 2
Ø d
Ø D
Ø d 3
Ø d 1
h 1
H
B30.020.001.*
B30.030.001.*
B30.040.001.*
20
30
40
13
20
27
15
18
25
11
11
14
6
6
6
21,5
32,0
38,0
4
5
7
7,5
13
18
AT.0312
AT.0312
AT.0312
AT.0006
AT.0006
AT.0538
AT.0702
AT.0702
AT.0702
2,0
5,5
13,0
Ø DArt. No.: Ø d Ø d2 Ø d3Ø d1 H h 1Gewicht/Weight
Hub/Stroke
Anschlussteile/Fittings
Anschlussteile/Fittings
AG M6 AG M5AG 1/8"
AT.0006 - AG 1/8"Alu
2
6,5
85
19,5
Ø 2,5
G 1/8"
Ø 5
Ø 10
SW 14
AT.0538 - AG 1/8"Alu
SW 4
1,5
8,5
4,5 20
~4 tief/deep
Ø 3,5
G 1/8"
Ø 6,8
Ø 10
SW 13
M 6Ø 3,5
7
12
14
*Ø 10
AT.0312 - AG M6
AT.0312 - AG M6 - *Ø D = 11 mmAlu
- *Ø D = 10 mmMessing vernickelt/nickled brass
*Material:NBR schwarz/ 60° ShoreSilikon transparent 60° Shore
black
mm g
M 52,8
57,
5
16,54
SW 12
Ø 6,5Ø 7,6
AT.0702 - AG M5Alu
AUTOMATION®
VAKUUM- UND GREIFERTECHNIK
MEHR ALS GREIFEN
233www.mf-automation.com
Vakuumbalgensauger - Serien „VPU“ Ø 20 - 50 mm
Vacuum Bellows „VPU“ dia. 20 - 50 mm Suction Cups - Series
Ø d 2
Ø d
Ø d 3
Ø d 1
Ø D
H
h1
*Material für/for Pos. NBR schwarz/ 40°/50°/60° ShoreSilikon transparent 20°/40°/60° Shore
1 + 2:black
*Material für/for Pos.NBR schwarz/ 50° ShoreSilikon transparent 50° Shore
3 + 4:black
B10.020.001.*
B10.030.001.*
B10.040.002.*
B10.050.005.*
22
32
42
54
1
2
3
4
11
17
23
32
5
6
6
8
15
20
25
28
11
11
11
20
19
29
30
36
5
7
7
7
8
10
10
10
3
9
14
23
Ø D Ø d Ø d 1 Ø d2 Ø d3 H h 1Pos. Art. No.
Anschlussteile/Fittings
Pos. Polyurethan blau/ 50° Shore auf Anfrage/
1 - 4:blue
on request
AT.0613 - AG M5
M 5
Ø 2,5
55
6
16
Ø 6,5
Ø 5,5
SW 8
Ø 5,7
M 6Ø 3,5
7
12
14
AT.0312 - AG M6
Ø 10
AT.0538 - AG 1/8"
SW 4
1,5
8,5
4,5 20
~4 tief/deep
Ø 3,5
G 1/8"
Ø 6,8
Ø 10
SW 13
AT.0612 - AG 1/8"
2
89
5 22
Ø 4
G 1/8"
Ø 8,5
Ø 14
SW 14
für/ Pos. 1forfür/ Pos. 1for
für/ Pos. 2for für/ Pos. 4for für/ Pos. 2 + 3for
für/ Pos. 1 + 2 + 3for
M 52,8
57,
5
16,54
SW 12
Ø 6,5Ø 7,6
AT.0702 - AG M5
AT.0539 - AG 1/8"
58
6,5 2,
5
18
G 1/8"Ø 3,5
SW 4
SW 13
Ø 5,7Ø 6,6~4 tief/deep
Gewicht/Weight
Hub/Strokemm g
AUTOMATION®
VAKUUM- UND GREIFERTECHNIK
MEHR ALS GREIFEN
234 www.mf-automation.com
Vakuumbalgensauger - Serien „VASB“ Ø 8 - 125 mm
Vacuum Bellows „VASB“ dia. 8 - 125 mm Suction Cups - Series
1
2
3
4
5
6
7
8
A
A
B
B
B
C
C
C
8
15
30
40
55
75
100
125
4
9,5
18
25,5
34,5
60
84
106
2
3
3
4
4
5
5
7
M5
1/8"
1/8"
1/4"
1/4"
1/4"
1/4"
3/8"
23
26,5
34
43
52,5
45,5
43,5
60
18
21,5
29
36
45,5
40,5
37,5
54
5
5
5
7
7
5
6
6
8
13
13
17
17
17
17
19
11,5
14,5
22
25
35
28
27,5
39
2
6
9
13
20
12
20
22
3,5
4,2
7
17
24
58
140
178
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
B12.008.001.*
B12.015.001.*
B12.030.004.*
B12.040.002.*
B12.055.001.*
B12.075.001.*
B12.100.001.*
B12.125.001.*
NB
R
Sbl
Str
PU
Pos. Art. No. Ø D Ø d Ø d1 G H h1 h2 h3 SW Hub
Stro
ke
Gew
icht
Wei
ght *Material
*Material
Dar
stel
lung
Vers
ion
Abmessungen/Dimensions
NBR schwarz/ 60° Shore (auf Anfrage/ 40° Shore)
Silikon blau/ 60° Shore
Silikon transparent 60° Shore (auf Anfrage/ 40°/20° Shore)
Polyurethan auf Anfrage/
black on request
blue
on request
on request
Hinweise / Note
Alle Anschlussteile aus Aluminium, vulkanisiertAll fittings are made of Aluminum, vulcanized
DarstellungVersion
DarstellungVersion
DarstellungVersionA B C
Ø d Ø d Ø d
Ø D Ø D Ø D
d1d 1
d 1
Ø d2Ø d2
Ø d2
H H H
h1 h1 h1
h2
h2 h2
h3 h3 h3
DichtungSeal
DichtungSeal Dichtung
Seal
*)
*) Pos. 7 auf Anfrage/on request
mm g
AUTOMATION®
VAKUUM- UND GREIFERTECHNIK
MEHR ALS GREIFEN
235www.mf-automation.com
Vakuumbalgensauger - Serien „PBG“ Ø 115 mm
Vacuum Bellows „PGB“ dia. 115 mm Suction Cups - Series
Ø 85
Ø 13,5
4x Ø 8,7
5
1,5
54 55,5
30
11 7 13
Ø 79
Ø 115
Ø 122
Ø 65
G 1/2"
13
68,5
4 x M 8
G 1/2"
Ø 53
Ø 65
Einsatzbereich:Für gewölbte Werkstücke mit glatter oderleicht rauer Oberfläche (Bleche, Holz, Glas usw.)
Use:For curved workpieces with smooth or lightly roughsurface (sheet, wood, glass etc.)
Vorteile: Advantages:Positionsstabil durch einvulkanisierte Trägerplatte.Auch für hohe Beschleunigungen geeignet.Anschlussteil bei Verschleiß des Saugers wieder verwendbar
With stable position by an invulcanized carrier plate.Suitable for high accelarations, as well.Fitting is reusable with wear of the suction cup.
M 8 x 16 (4x)DIN 6912
Art. No.: B10.115.001.*
Art. No.: B11.115.001.*
ohne Anschlussteil/
Gewicht/ : 270 gHub/ : 30 mm
without fitting
WeightStroke
mit Anschlussteil (montiert)/
Gewicht/ : 400 g
with fitting (mounted)
Weight
Anschlussteil/ (Standard)AT.0056 - IG 1/2"
Fitting
Material: AluGewicht/ : 130 gWeight
AT.0056
* Materialien/ :
NBR schwarz/
Silikon transparent
Polyurethan blau/
Materials
black
blue
-40° - +110° C
-70° - +200° C
-25° - + 80° C
Hinweis/Note:Passende Federstößel mit verschiedenen Hübenauf Anfrage lieferbar.Suitable spring levelers with different strokesare available on request.
Ø 4
0
Ø 4
0
AUTOMATION®
VAKUUM- UND GREIFERTECHNIK
MEHR ALS GREIFEN
236 www.mf-automation.com
Vakuumbalgensauger - Serien „PBG“ Ø 155 mm
Vacuum Bellows „PBG“ dia. 155 mm Suction Cups - Series
Ø 120
Ø 13,5
4x Ø 8,7
6
1,5
75 76,5
38
11 7 13
Ø 110
Ø 155
Ø 167
Ø 65
G 1/2"
13
89,5
4 x M 8
G 1/2"
Ø 53
Ø 65
Einsatzbereich:Für gewölbte Werkstücke mit glatter oderleicht rauer Oberfläche (Bleche, Holz, Glas usw.)
Use:For curved workpieces with smooth or lightly roughsurface (sheet, wood, glass etc.)
Vorteile: Advantages:Positionsstabil durch einvulkanisierte Trägerplatte.Auch für hohe Beschleunigungen geeignet.Anschlussteil bei Verschleiß des Saugers wieder verwendbar.
With stable position by an invulcanized carrier plate.Suitable for high accelarations, as well.Fitting is reusable with wear of the suction cup.
M 8 x 16 (4x)DIN 6912
Art. No.: B10.155.001.*
Art. No.: B11.155.003.*
ohne Anschlussteil/
Gewicht/ : 650 gHub/ : 38 mm
without fitting
WeightStroke
mit Anschlussteil (montiert)/
Gewicht/ : 780 g
with fitting (mounted)
WeightAT.0056
* Materialien/Materials:
NBR schwarz/
Silikon transparent
Polyurethan blau/
black
blue
-40° - +110° C
-70° - +200° C
-25° - + 80° C
Hinweis/Note:Passende Federstößel mit verschiedenen Hübenauf Anfrage lieferbar.Suitable spring levelers with different strokesare available on request.
Ø 4
0
Ø 4
0
Anschlussteil/ (Standard)AT.0056 - IG 1/2"
Fitting
Material: AluGewicht/ : 130 gWeight
AUTOMATION®
VAKUUM- UND GREIFERTECHNIK
MEHR ALS GREIFEN
237www.mf-automation.com
Vakuumbalgensauger - Serien „FGA-AM2-blau“ Ø 5 - 78 mm
Vacuum Bellows „FGA-AM2-blau“ dia. 5 - 78 mm Suction Cups - Series
Ø d1
Ø d1Ø d1
Ø d1
Ø d
Ø dØ d
Ø d
Ø D Ø D Ø D Ø D
h2
h2
h2
h2
H
H H H
h1 h1 h1 h1
1234567891011121314
5,511131618192224253343536378
5791214
17,5202532425262
444444448888812
44,74,4444448888
710101010101010161818181825
799101010101018181821
79999999131313131320
8679999913131313
0,50,71,01,21,51,61,82,86,16,410152842
0,50,50,61,11,41,82,23,89,418,524,650
25,55555812611
12,5151514
333710101020
14,5222731
11161619
16,516192325
27,528343446
13,513,5152123232334
37,5464955
B10.005.AM2.blB10.011.AM2.blB10.013.AM2.blB10.016.AM2.blB10.018.AM2.blB10.019.AM2.blB10.022.AM2.blB10.024.AM2.blB10.025.AM2.blB10.033.AM2.blB10.043.AM2.blB10.053.AM2.blB10.063.AM2.blB10.078.AM2.bl
B20.005.AM2.blB20.007.AM2.blB20.009.AM2.blB20.012.AM2.blB20.014.AM2.blB20.018.AM2.blB20.020.AM2.blB20.025.AM2.blB20.032.AM2.blB20.042.AM2.blB20.052.AM2.blB20.062.AM2.bl
Pos.
Pos.
Art. No.:
Art. No.:
Ø D
Ø D
Ø d
Ø d
Ø d1
Ø d1
H
H
h1 Hub/
mmStroke
h1 Hub/
mmStroke
h2
h2
Gewicht/
gWeight
Gewicht/
gWeight
Abmessungen/ in mmDimensions
Pos. 1 Pos. 2-8
Pos. 1-3 Pos. 4-8 Pos. 9-12
Pos. 9-11 Pos. 12-14
Ø dØ d
Ø dØ d1
Ø d1Ø d1
Ø D Ø D Ø D
h2
h2
h
H
H
H
h1
h1
h1
Ans
chlu
sste
ile a
uf A
nfra
ge li
efer
bar/
Fitt
ings
are
ava
ilabl
e on
req
uest1
23456789101112
Eigenschaften: Features:Labs- und silikonfreiÖlbeständigHohe Standzeit
Free of Labs and SiliconeOil resistanceLong service life
hochabdruckarm, temperaturbeständig -10° - +165° C
high anti-marking, temperature resistant -10° - +165 ° C
Abmessungen/ in mmDimensions
AUTOMATION®
VAKUUM- UND GREIFERTECHNIK
MEHR ALS GREIFEN
238 www.mf-automation.com
Vakuumbalgensauger - Serien „FKM“ Ø 8 - 22 mm
Vacuum Bellows „FKM“ dia. 8 - 22 mm Suction Cups - Series
Ø 8Ø 4
Ø 4
Ø 8
7
15
Ø 10
Ø 6,5
Ø 18
Ø 8,5
1,5
11
Ø 14,5
Ø 5
5,54
19
Ø 11
Ø 22
Art. No.: 01 08 50.* (grün/ )green Art. No.: 01 18 50.* (grün/ )green Art. No. : 01 22 19.* (braun/ )brown
Hub/ : 4,0 mmGewicht/ : 0,6 g
StrokeWeight
Hub/ : 7,0 mmGewicht/ : 1,5 g
StrokeWeight
Hub/ : 7,5 mmGewicht/ : 4,7 g
StrokeWeight
KunststoffindustrieAutomobilindustrieChemieindustrie
Plastic industryAutomobil IndustryChemical Industry
Keine sichtbaren Abdrücke nach dem HandlingBeständig gegen aggressive Chemikalien und ÖleOzonbeständig
No visible prints after the handlingResistant to aggressive chemicals and oilsOzone resistant
Spezialeinsatz: Vorteile: Special use: Advantages:
*Material:Spezial-FKM 50-60° Shore (Farbe: grün oder braun/ )Temperaturbeständigkeit/ : -20° - +300° C (kurzzeitig/ : +350° C)
color: green or browntemperature resistance
short-termWichtiger Hinweis:Wir haben weitere Standardhalter im Programm.Sonderausführungen auf Anfrage!
Important note:
We have more standard fittings in our program.Special designs on request!
00 08 06 - AG M5
M 5
17
44,
58,
5
Ø 5,25
Ø 2,5
SW
00 08 07 - AG M8
M 8
9,5
2,4
1,1
5
14,5
Ø 10
Ø 7
SW 4
Ø 3
00 08 61 - AG 1/8"
10
14,5
4,5Ø 10
G1/8"
SW 4
00 08 133 - AG 1/8"
G 1/8"
85,
55
18,5
Ø 8,5
SW 13
Ø 4
Pos. 1 Pos.2 Pos.3
Pos. 1 Pos. 2 Pos. 2 Pos. 3
Anschlussteile/Fittings
Weitere Standard- Materialien/ :NBR schwarz -40° - +130°CNR schwarz/ -70° - +80° CSilikon transparent -50° - +300° C
further standard materials/black
black
AUTOMATION®
VAKUUM- UND GREIFERTECHNIK
MEHR ALS GREIFEN
239www.mf-automation.com
Vakuumbalgensauger - Serien „PU“ Ø 9 - 18 mm
Vacuum Bellows „PU“ dia. 9 - 18 mm Suction Cups - Series
Ø 9
Ø 9
Ø 9
Ø 9 Ø 14
Ø 18
Ø 4
Ø 4
Ø 4
Ø 5 Ø 5
Ø 7
Art. No.: B10.009.001.*Hub/ : 1,5 mm
Gewicht/ : 0,6 g
Stroke
Weight
Art. No.: B20.014.005.*
Gewicht/ : 1,1 g
Hub/ : 6 mmStroke
Weight
Art. No.: B20.018.003.*
Gewicht/ : 1,9 g
Hub/ : 11 mmStroke
Weight
8,5
5
5
13
17
24
Spezialeinsatz:
Vorteile:
Material:
Kunststoffindustrie Verpackungsindustrie Glas-Optik-Pharma-Industrie
Keine sichtbaren Abdrücke nach dem Handling! Hohe Verschleißfestigkeit. Hohe Elastizität. Geeignet für hohe Taktzeiten (schnelle Rückstellung). Gute Mineralöl- und Ozonbeständigkeit. Sauger mit verschiedenen Ø auswechselbar, da gleiche Halteraufnahmen
Spezial-Polyurethan 60° Shore hochabdruckarm Temperaturbeständigkeit: -20° - +80° C
Wichtiger Hinweis:
Siehe auch unter:
Wir haben weitere hochabdruckarme Vakuumsauger aus FKM im Programm(Temperaturbeständigkeit bis +350° C)Bitte fragen Sie an!
www.mf-automation.com
Special use: Plastic industry Packaging industry Glass-Optik-Pharma-Industry
Advantages: No visible prints after the handling! High wear-resistance. High elasticity. Suitable for high cycle times (rapid reset). Good mineral oil and ozone resistance. Vacuum cups exchangeable with different dia. because of the same fitting.
Material: Special Polyurethane 60 ° Shore high wear resistant Temperature resistance: -20° - +80 ° C
See also: www.mf-automation.com
Important note:We have other high anti marking vacuum cupsmade of FKM in our program (temperature restistance up to +350° C)Please inquire!
Anschlussteile/00 08 03 - AG 1/8"00 08 04 - IG 1/8"AT.0624 - AG M5
Fittings
*Material:Polyurethan blau/blue
*Material:Polyurethan rot/red
*Material
Polyurethane grün/green