Vacuum Products SMC is filling the void with vacuum and pneumatics
Transcript of Vacuum Products SMC is filling the void with vacuum and pneumatics
Vac
uu
m
Vacuum ProductsSMC is filling the void with vacuum and pneumatics
� Filling the Void: single supplier for vacuum and pneumatics
SMC is fi lling the void by offering customers a market leading range of pneumatics and complementary vacuum products.
Both applications share the same physical principles of pressure but operate at different levels.
Therefore, it’s no coincidence that as the world’s leading pneumatics provider we have used our in- house team of R&D specialists to design a comprehensive range of vacuum products.
� Performing under pressure and saving energy
This provides customers with a real advantage as they have access to one reliable supplier, SMC, offering a complete solution to their ‘pressure’ needs; a frequent requirement in automated machinery, especially for those operating picking systems. Choosing vacuum technology for a picking system in isolation is a fairly simple and economical exercise. But the key challenge facing manufacturers is how to integrate the key operating components so overall reliability and productivity is optimised. Therefore, choosing the correct pneumatics or electric actuators for movement and vacuum for gripping in the same system is essential. And all this using less energy, which means saving operation costs.
� Global Player
Thanks to SMC’s global presence and our technical support team of 4,500 sales engineers and 1,400 R&D specialists, we remove the ‘pressure’ of choosing the ideal product solutions. At SMC we offer personal, tailored advice so customers are guaranteed the perfect combination of pneumatic or electric actuated movement and vacuum gripping solutions to achieve the best overall performance; ultimately saving time and delivering cost effi ciencies.
Index PageVacuum ejector system / Vacuum pump system 3Vacuum pads 4-12Vacuum ejectors 13-17Other products for vacuum 17-23Vacuum selection software 24
2
3
Vacuum ejector system / Vacuum pump system
� Vacuum ejector system
SMC can offer the right products for both vacuum systems
CompressorModular EjectorsSeries ZR,ZQ,ZK2,ZB
Valves Suitable forVacuum
EjectorsSeries ZH,ZL
Valves Suitablefor Vacuum
Vacuum switchSeries ZSE10
ZSE30AZSE40A
Pressure Gauge forVacuumSeries GZ46
FilterSeries ZFB
Vacuum gaugeSeries GZ46
Exhaust valve
Suction pad
Filter Series ZP
SeriesZCUK
Work piece
Suction valve
Vacuum switch
Flow switchSeries PFMFlow switch
Series PFM
Compressor
Refrigeratedair dryer
Series IDFA
Air filterSeries AF
Mist separator
Series AFM
RegulatorSeries AR
Series ZP
Series ZCUK
Work piece
Flow switchSeries PFM
Vacuum gaugeSeries GZ46
Vacuum pump
Vacuum regulator / Series IRVDirect operated vacuum regulator that regulates vacuum pressureElectro-pneumatic regulator / Series ITV209�Controls vacuum pressure by external electric signal.
Control unit /ZR100ZQ1000
VQD1000-V
For the ZR, ZQ and VQD, thecombination of single units at rightcan be integrated into a unit
� Vacuum pump system
4
U
MU
EU
AU
C
UM
UT
CT
B
J
MB
ZJ
D
AN
MT
W
U
H
HT
HB
HW
U
H
S
K
U
H
HB
0.8 1.1 1.5 2 3 3.5 4 5 6 7 8 9 10 11 13 14 15
NewNewNew
—
—
—
—
—
—
—
—
—
—
—
—
—
�
—
—
—
—
—
—
—
—
—
—
—
—
—
�: Series ZP3 �: Series ZP2 �: Series ZP
Pad Diameter List
Pad type Symbol
Flat
Flat with rib
Flat with groove
Thin flat
Thin flat with rib
Bellows
Deep
Nozzle pad
Flat pad
Oval
Heavy-duty pad
Mark-free pad
Sponge pad
Resinattachment
Pad with ball spline buffer
Heavy-dutyball joint pad
Flat
Bellows
Oval
∗ Related pad
�Products other than above
Vacuum pad for transferring disks
Vacuum pad for fixing panel
Cyclone pad(Non-contact pad)
Vacuum saving valve
Note) The ZP2 series is blast type.
—
—
—
—
—
—
—
—
—
—
—
—
—
�
—
—
—
—
—
—
—
—
—
—
—
—
—
�
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
�
�
�
—
—
—
—
—
—
—
�
—
—
—
—
—
—
—
—
—
—
—
—
�
—
—
Note)
Note)
2 x 4�
�
—
—
�
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
��
—
�
�
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
Note)
��
Note)
�
�
�
—
�
—
—
—
�
�
—
—
—
—
—
—
—
�
—
�
—
�
—
—
3.5 x 7�
3.5 x 7�
4 x 104 x 204 x 30�
4 x 10�
6 x 106 x 206 x 30�
5 x 105 x 205 x 30�
Note)
Note)
—
�
—
—
—
—
�
—
—
—
—
�
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
Note) Note)
Note)
Note)
�
�
�
�
�
�
�
—
�
�
�
—
—
—
—
—
—
—
—
�
—
�
�
�
—
—
Note) Note)
���
Note)
—
—
—
—
�
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
�
�
�
�
�
�
—
—
—
�
—
—
—
—
—
—
—
—
—
�
—
�
�
�
—
—
Note)
���
Note)
—
—
—
—
—
—
—
—
—
�
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
8 x 208 x 30�
�
�
—
—
�
�
�
�
�
�
—
�
—
�
—
—
—
—
—
�
—
�
�
—
—
—
Note)
Note)
Note)
Note)
—
—
—
—
—
—
�
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
��
��
�
—
—
—
�
�
�
�
—
—
—
—
—
—
—
—
—
—
—
—
—
—
�
—
—
—
—
—
—
—
—
—
�
—
—
�
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
�
�
—
—
—
—
—
—
�
�
—
—
—
�
—
—
—
—
—
—
—
�
—
—
—
—
Note)
Note)
Note)
Note)Note)
—
�
Vacuum Pads
5
Symbol
∗ �: Refer to our website www.smc.eu for moredetails of the ZP series.
SMC vacuum pad
Pad diameter
�
—
—
—
�
—
�
—
�
—
�
—
—
—
�
—
—
—
—
—
—
—
—
�
—
—
—
��
—
—
—
—
—
—
�
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
�
—
—
—
�
�
�
�
�
—
—
�
—
—
—
—
—
—
—
�
—
—
�
—
—
—
Note) Note) Note)
Note) Note)
�
—
—
—
�
—
—
—
�
�
—
—
�
—
�
—
—
—
—
—
�
—
—
�
—
—
—
—
—
—
—
—
—
—
—
—
�
—
—
—
—
�
—
—
—
—
—
—
—
—
—
—
—
30 x 50�
�
—
—
—
�
—
—
—
�
—
—
—
—
—
—
—
�
—
�
—
�
—
—
�
—
—
—
�
—
—
—
�
—
—
—
�
—
—
�
�
—
—
—
�
—
�
—
�
�
—
—
—
�
�
—
—
—
—
—
—
—
—
—
—
—
�
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
�
—
—
—
�
—
—
—
�
—
—
—
—
—
—
—
�
—
�
—
�
�
—
—
—
�
�
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
�
—
�
—
—
�
—
—
—
�
�
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
�
—
�
—
—
�
—
—
—
�
�
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
�
—
�
—
—
�
—
—
—
�
�
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
�
—
�
—
—
�
—
—
—
�
�
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
�
�
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
�
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
�
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
�
—
—
—
—
—
—
—
—
—
—
Search
16 18 20 25 30 32 40 46 50 63 80 100 125 150 250 300 340
U
MU
EU
AU
C
UM
UT
CT
B
J
MB
ZJ
D
AN
MT
W
U
H
HT
HB
HW
U
H
S
K
U
H
HB
6
Part Number
Flat Type Flat with Ribs Deep 1.5 Bellows Type
NBRPad Ø[mm]
VacuumEntry Silicone Silicone
ZPT02UN-B5ZPT04UN-B5ZPT06UN-B5ZPT08UN-B5ZPT10UN-B5ZPT13UN-B5ZPT16UN-B5ZPT20UN-B5ZPT20UN-B8ZPT25UN-B5ZPT25UN-B8ZPT32UN-B5ZPT32UN-B8ZPT40UN-B8ZPT50UN-B8
2468101316
20
25
32
4050
M5 x 0.8
M5 x 0.8M8 x 1.25M5 x 0.8M8 x 1.25M5 x 0.8M8 x 1.25M8 x 1.25M8 x 1.25
ZPT02US-B5ZPT04US-B5ZPT06US-B5ZPT08US-B5ZPT10US-B5ZPT13US-B5ZPT16US-B5ZPT20US-B5ZPT20US-B8ZPT25US-B5ZPT25US-B8ZPT32US-B5ZPT32US-B8ZPT40US-B8ZPT50US-B8
Part Number
NBR
ZPT10CN-B5ZPT13CN-B5ZPT16CN-B5ZPT20CN-B5ZPT20CN-B8ZPT25CN-B5ZPT25CN-B8ZPT32CN-B5ZPT32CN-B8ZPT40CN-B8ZPT50CN-B8
ZPT10CS-B5ZPT13CS-B5ZPT16CS-B5ZPT20CS-B5ZPT20CS-B8ZPT25CS-B5ZPT25CS-B8ZPT32CS-B5ZPT32CS-B8ZPT40CS-B8ZPT50CS-B8
Silicone
Part Number
NBR
ZPT10DN-B5
ZPT16DN-B5
ZPT25DN-B5ZPT25DN-B8
ZPT40DN-B8
ZPT10DS-B5
ZPT16DS-B5
ZPT25DS-B5ZPT25DS-B8
ZPT40DS-B8
Silicone
Part Number
NBR
ZPT06BN-B5ZPT08BN-B5ZPT10BN-B5ZPT13BN-B5ZPT16BN-B5ZPT20BN-B5ZPT20BN-B8ZPT25BN-B5ZPT25BN-B8ZPT32BN-B5ZPT32BN-B8ZPT40BN-B8ZPT50BN-B8
ZPT06BS-B5ZPT08BS-B5ZPT10BS-B5ZPT13BS-B5ZPT16BS-B5ZPT20BS-B5ZPT20BS-B8ZPT25BS-B5ZPT25BS-B8ZPT32BS-B5ZPT32BS-B8ZPT40BS-B8ZPT50BS-B8
ZPT02UN-A5ZPT04UN-A5ZPT06UN-A5ZPT08UN-A5ZPT10UN-A5ZPT13UN-A5ZPT16UN-A5ZPT20UN-A6ZPT25UN-A6ZPT32UN-A6ZPT40UN-A6ZPT50UN-A6
24681013162025324050
M5 x 0.8
M6 x 1
ZPT02US-A5ZPT04US-A5ZPT06US-A5ZPT08US-A5ZPT10US-A5ZPT13US-A5ZPT16US-A5ZPT20US-A6ZPT25US-A6ZPT32US-A6ZPT40US-A6ZPT50US-A6
ZPT10CN-A5ZPT13CN-A5ZPT16CN-A5ZPT20CN-A6ZPT25CN-A6ZPT32CN-A6ZPT40CN-A6ZPT50CN-A6
ZPT10CS-A5ZPT13CS-A5ZPT16CS-A5ZPT20CS-A6ZPT25CS-A6ZPT32CS-A6ZPT40CS-A6ZPT50CS-A6
ZPT10DN-A5
ZPT16DN-A5
ZPT25DN-A6
ZPT40DN-A6
ZPT10DS-A5
ZPT16DS-A5
ZPT25DS-A6
ZPT40DS-A6
ZPT06BN-A5ZPT08BN-A5ZPT10BN-A5ZPT13BN-A5ZPT16BN-A5ZPT20BN-A6ZPT25BN-A6ZPT32BN-A6ZPT40BN-A6ZPT50BN-A6
ZPT06BS-A5ZPT08BS-A5ZPT10BS-A5ZPT13BS-A5ZPT16BS-A5ZPT20BS-A6ZPT25BS-A6ZPT32BS-A6ZPT40BS-A6ZPT50BS-A6
Male thread connection
Female thread connection
For workpiece with curved shape.
When adsorption surface is inclined or there is no buffer space.
PadWhen workpiece is likely to deform or when it must be released certainly.
PadPadWhen the workpiece
is flat and not deformed.
Pad
Vacuum pads
� General purpose vacuum pads (ø 2 to ø 50)Basic models: vacuum pad + adaptor for vertical piping. Other materials also are available (please see below).
� Pad Material and Characteristics
Characteristics
MaterialNBR
Silicon rubberUrethane rubberFluoro rubber
Conductive NBRConductive silicon rubber
DurometerHS (5)
Operating temperaturerange [°C]
0 to 120–30 to 200
0 to 600 to 2500 to 100
–10 to 200
Oilresistancegasoline
Oilresistance
benzol
Alkali resistance
Acid resistance
Weatherresistance
Ozone resistance
Abrasionresistance Waterproof
Solventresistance(Benzene,Toluene)
∗ The above table covers only general characteristics of subject rubber materials.
A50/SA40/SA60/S
A60/SA50/SA50/S
: Little or no influence : Can be used depending on conditions : Not suitable
Vacuum Pads
7
M5 x 0.8
M8 x 1.25
ZP2V-A5-03
ZP2V-A8-05
� Female thread
Spare parts and accessories
Part NumberPart Number
Buffer stroke
Mounting thread
AccessoriesBasic product
NBR
Pad Ø[mm]
VacuumEntry
Silicone
ZPT02UN-B5ZPT04UN-B5ZPT06UN-B5ZPT08UN-B5ZPT10UN-B5ZPT13UN-B5ZPT16UN-B5ZPT20UN-B5ZPT25UN-B5ZPT32UN-B5
ZPT40UN-B8
ZPT50UN-B8
2468101316202532
40
50
M5 x 0.8
M8 x 1.25
ZPT02US-B5ZPT04US-B5ZPT06US-B5ZPT08US-B5ZPT10US-B5ZPT13US-B5ZPT16US-B5ZPT20US-B5ZPT25US-B5ZPT32US-B5
ZPT40US-B8
ZPT50US-B8
ZPB3J10-B01ZPB3J20-B01ZPB3J30-B01ZPB3J50-B01
ZPB2J10-B5ZPB2J20-B5ZPB2J30-B5ZPB2J40-B5ZPB2J50-B5
10 mm20 mm30 mm40 mm50 mm
10 mm20 mm30 mm50 mm
ZPB3K10-B01ZPB3K20-B01ZPB3K30-B01ZPB3K50-B01
ZPB2K10-B5ZPB2K20-B5ZPB2K30-B5ZPB2K40-B5ZPB2K50-B5
M5 x 0.8
Rc 1/8"
Part Number(rotating type)
Part Number(non-rotating type)
Vacuumentry
Vacuumentry
M10 x 1
M14 x 1
Vacuum pad + adaptor for vertical piping
1
1
2
3
Vacuum saving valve2 Buffer for vertical vacuum entry 3
Buffer for vertical vacuum entry
VAC
Vacuum saving valve Vacuumsaving valve
Vacuum entry
Vacuum entry Vacuum entry Vacuum entryMounting thread
Pad side
Buffer for lateral vacuum entry
Adapter for lateral entry
5
4
2
VAC
Part Number
Flat Type Flat with Ribs Deep 1.5 Bellows Type
NBRPad Ø[mm] Silicone Silicone
ZP02UNZP04UNZP06UNZP08UNZP10UNZP13UNZP16UNZP20UNZP25UNZP32UNZP40UNZP50UN
24681013162025324050
ZP02USZP04USZP06USZP08USZP10USZP13USZP16USZP20USZP25USZP32USZP40USZP50US
Part Number
NBR
ZP10CNZP13CNZP16CNZP20CNZP25CNZP32CNZP40CNZP50CN
ZP10CSZP13CSZP16CSZP20CSZP25CSZP32CSZP40CSZP50CS
Silicone
Part Number
NBR
ZP10DN
ZP16DN
ZP25DN
ZP40DN
ZP10DS
ZP16DS
ZP25DS
ZP40DS
Silicone
Part Number
NBR
ZP06BNZP08BNZP10BNZP13BNZP16BNZP20BNZP25BNZP32BNZP40BNZP50BN
ZP06BSZP08BSZP10BSZP13BSZP16BSZP20BSZP25BSZP32BSZP40BSZP50BS
When the workpiece is flat and not deformed.
When workpiece is likely to deform or when it must be released certainly.
For workpiece with curved shape.
When adsorption surface is inclined or there is no buffer space.
Suction ofwork piece
Withoutwork piece
Withoutwork piece
Can avoid the loss of pressure even when thereis no work piece.
Series ZP2V
Series ZP2V
8
� Female thread
� Male thread
Accessories
∗ Only applicable to vacuum pads with M8 entry port
Part NumberPart Number
Buffer stroke
Mounting thread
AccessoriesBasic product
NBR
Pad Ø[mm]
VacuumEntry
Silicone
ZPT02UN-B5ZPT04UN-B5ZPT06UN-B5ZPT08UN-B5
ZPT10UN-B5
ZPT13UN-B5
ZPT16UN-B5
ZPT20UN-B5ZPT20UN-B8ZPT25UN-B5ZPT25UN-B8ZPT32UN-B5ZPT32UN-B8
ZPT40UN-B8
ZPT50UN-B8
2468
10
13
16
20
25
32
40
50
M5 x 0.8
M5 x 0.8M8 x 1.25M5 x 0.8M8 x 1.25M5 x 0.8M8 x 1.25
M8 x 1.25
M8 x 1.25
ZPT02US-B5ZPT04US-B5ZPT06US-B5ZPT08US-B5
ZPT10US-B5
ZPT13US-B5
ZPT16US-B5
ZPT20US-B5ZPT20US-B8ZPT25US-B5ZPT25US-B8ZPT32US-B5ZPT32US-B8
ZPT40US-B8
ZPT50US-B8
ZPB1J6ZPB1J10ZPB1J15ZPB1J25
ZPB2J10ZPB2J20ZPB2J30ZPB2J40ZPB2J50
ZPB3J10ZPB3J20ZPB3J30ZPB3J50
ZPB2J10∗
ZPB2J20∗
ZPB2J30∗
ZPB2J40∗
ZPB2J50∗
ZPB1K6ZPB1K10ZPB1K15ZPB1K25
ZPB2K10ZPB2K20ZPB2K30ZPB2K40ZPB2K50
6 mm10 mm15 mm25 mm
10 mm20 mm30 mm40 mm50 mm
10 mm20 mm30 mm40 mm50 mm
10 mm20 mm30 mm50 mm
ZPB3K10ZPB3K20ZPB3K30ZPB3K50
ZPB2K10∗
ZPB2K20∗
ZPB2K30∗
ZPB2K40∗
ZPB2K50∗
ZPRS-04-B5 Ø 4 mm
ZPRS-04-B5 Ø 4 mm
ZPRL-06-B5
ZPRL-06-B5
ZPRL-06-B5
ZPRL-08-B8
Ø 6 mm
Ø 6 mm
Ø 6 mm
Ø 8 mm
Part Number(rotating type)
Part Number(non-rotating type)
Vacuumentry
M10 x 1
M8 x 1
M10 x 1
M14 x 1
Vacuum pad + adaptor for vertical piping
1 Adapter for lateral piping 4 Buffer for lateral vacuum entry5
Vacuum entry
Vacuum entryMounting thread
Pad side
2 Vacuum saving valve
1 Vacuum entry
Vacuum Pads
Part NumberPart Number
AccesoriesBasic product
NBR
Pad Ø[mm]
VacuumEntry
Silicone
ZPT02UN-A5ZPT04UN-A5ZPT06UN-A5ZPT08UN-A5ZPT10UN-A5ZPT13UN-A5ZPT16UN-A5ZPT20UN-A6ZPT25UN-A6ZPT32UN-A6ZPT40UN-A6ZPT50UN-A6
24681013162025324050
M5 x 0.8
M6 x 1
M5 x 0.8
M6 x 1
ZPT02US-A5ZPT04US-A5ZPT06US-A5ZPT08US-A5ZPT10US-A5ZPT13US-A5ZPT16US-A5ZPT20US-A6ZPT25US-A6ZPT32US-A6ZPT40US-A6ZPT50US-A6
ZP2V-B5-03
ZP2V-B6-05
Vacuumentry
Vacuum pad + adaptor for vertical piping
1 Vacuum saving valve 2
Vacuum entry Vacuum entry
Pad side
9
Vacuum pads
� Dedicated vacuum pads (ø 2 to ø 50)
Multistage bellows type
Oval type
� Female thread
Part NumberPart Number Part Number
(non rotating type)Buffer stroke Vacuum
entryMounting thread
Vacuum entry Vacuum entry
Pad side
NBRPad size
[mm] Silicone
ZPT2004UN-B5
ZPT3507UN-B5
ZPT4010UN-B5
ZP2-T6020WN-B5
ZP2-T8030WN-B5
2 x 4
3.5 x 7
4 x 10
6 x 20
8 x 30
Vacuum entry
M5 x 0.8
ZPT2004US-B5
ZPT3507US-B5
ZPT4010US-B5
ZP2-T6020WS-B5
ZP2-T8030WS-B5
For use where there is no space for spring type buffer
For workpieces with inclined adsorption surface
For workpieces with limitations on the adsorption surface
ZP2V-A5-03
M5 x 0.8
M5 x 0.8
ZP2V-A5-03 M5 x 0.8
M10 x 1
Vacuum entry
ZPB2K10-B5ZPB2K20-B5ZPB2K30-B5ZPB2K40-B5ZPB2K50-B5
Part Number Male thread
Part Number
AdapterVacuum Pad
NBR
Pad Ø[mm]
Silicone
ZP2-06JNZP2-B10JNZP2-B15JNZP2-B25JNZP2-B30JN
610152530
ZP2-06JSZP2-B10JSZP2-B15JSZP2-B25JSZP2-B30JS
ZPT1-A5
ZPT3-A8
M5 x 0.8
M8 x 1
Vacuum entry
Female thread
Part Number
ZPT1-B5
ZPT3-B8
M5 x 0.8
M8 x 1
Vacuum entry
Buffer for vertical vacuum entry
Vacuum saving valve
Buffer for lateral vacuum entry
Adapter for lateral entry
5
42
2 3
3
5
Vacuum entry
Mounting thread
Part NumberPart Number Part Number
(non rotating type)Buffer stroke Mounting thread
NBR
Pad size[mm] Silicone
ZPT2004UN-B5
ZPT3507UN-B5
ZPT4010UN-B5
ZP2-T6020WN-B5
ZP2-T8030WN-B5
2 x 4
3.5 x 7
4 x 10
6 x 20
8 x 30
Vacuumentry
M5 x 0.8
ZPT2004US-B5
ZPT3507US-B5
ZPT4010US-B5
ZP2-T6020WS-B5
ZP2-T8030WS-B5
ZPRS-04-B5 ø 4mm
ZPRS-04-B5 ø 4mm
M8 x 1
M10 x 1
Vacuum entry
6 mm10 mm15 mm25 mm
10 mm20 mm30 mm40 mm50 mm
10 mm20 mm30 mm40 mm50 mm
ZPB1K6ZPB1K10ZPB1K15ZPB1K25
ZPB2K10ZPB2K20ZPB2K30ZPB2K40ZPB2K50
Pad side
Vacuum entry
Mounting thread
1
1
Vacuum entry Vacuum entry41
Vacuum entry
10
Nozzle type
Sponge type
Mark free pad series
For adsorption of small components (such as IC chips)
For adsorption of workpieces with bumps Material: conductive silicone
� Male thread
Basic models: vacuum pad + adapter (male thread)
Part Number
Vacuum saving valve
Part Number
Vacuum entryVacuum entry
Pad side
NBR
Pad Ø[mm]
Pad Ø [mm]
SiliconeZPT2004UN-A5ZPT3507UN-A5ZPT4010UN-A5
2 x 43.5 x 74 x 10
0.81.1
Vacuumentry
Vacuum entry
M5 x 0.8
M5 x 0.8
ZPT2004US-A5ZPT3507US-A5ZPT4010US-A5
Part NumberNBR Silicone
ZP2-T08ANN-A5ZP2-T11ANN-A5
ZP2-T08ANS-A5ZP2-T11ANS-A5
Spare parts: vacuum pad
Pad Ø [mm]
0.81.1
Part Number
NBR SiliconeZP2-08ANNZP2-11ANN
ZP2-08ANSZP2-11ANS
Basic models: vacuum pad + adapter (male thread)
Pad Ø [mm]
468
1015
468
1015
Vacuum entry
M3 x 0.5
M5 x 0.8
Part Number
Female thread Male threadZP2-T04SGS-B3ZP2-T06SGS-B5ZP2-T08SGS-B5ZP2-T10SGS-B5ZP2-T15SGS-B5
ZP2-T04SGS-A3ZP2-T06SGS-A5ZP2-T08SGS-A5ZP2-T10SGS-A5ZP2-T15SGS-A5
Spare parts: vacuum pad Pad Ø [mm] Part Number
ZP2-04SGSZP2-06SGSZP2-08SGSZP2-10SGSZP2-15SGS
ZP2V-B5-03 M5 x 0.8
Vacuum entry
Vacuum Pads
Adsorption mark characteristics [�: Little or no influence �: Can be used depending on the conditions. : Not suitable]
5 to 40
5 to 40 0.6
5 to 60
0.2
5 to 100
0.2
–Made to Order
Material of the adsorption part(Part in contact with
the workpiece)Pad type Operating temperature
range [°C]Visual checking
Adsorption mark Note 1)
Vapour method Note 3)Condition Note 2) (Initial value)
Staticfrictionratio
Note 5)
Mar
k-fr
ee P
ad S
erie
s
Stuck fluororesin pad
Resinattachment
Cyclone pad
Mark-freeNBR pad
Mark-free NBR(Specially treated Note 4))
NBR + Stuck fluororesin
Fluororubber +Stuck fluororesin
PEEK
Conductive PEEK(Volume resistivity: 1 x 106 cm)
— Standard: –5 to 60 (No freezing)
∗ The above table is for reference when selecting the pad. Values and evaluation are reference data only. Preparatory testing under actual operating conditions is recommended.
Note 1) Adsorption mark Indicates the transfer of rubber constituents from the pad.
Note 2) Condition Visual evaluation of the adsorption mark.
Note 3) Vapour method Method of applying vapour to the workpiece to visually check for adsorption marks.
Note 4) Specially treated NBR is specially treated to modify and reduce the transfer of rubber constituents.
Note 5) Static friction ratio Static friction ratio when the workpiece (glass) is adsorbed by the pad. (NBR = 1 as a benchmark).When the cyclone pad is used, the pad does not come into contact with the workpiece (glass).The customer needs to install a guide for holding.
1
3
2
4
11
� Vacuum pads with ball joint
� Heavy duty vacuum pads (Ø 40-125 mm)
For adsorption of work pieces withinclined surface.
Basic models: vacuum pad + adapter
� Male mounting thread with female thread vacuum entry
Basic models: vacuum pad + adapter
� Male mounting thread with female thread vacuum entry
Pad Ø [mm]
1013162025324050
M8 x 1
M10 x 1
M14 x 1
Vacuum entry Mounting thread (male)
M5 x 0.8
Part Number
NBR SiliconeZPT10FN-B5-A8ZPT13FN-B5-A8ZPT16FN-B5-A8
ZPT20FN-B5-A10ZPT25FN-B5-A10ZPT32FN-B5-A10ZPT40FN-B5-A14ZPT50FN-B5-A14
ZPT10FS-B5-A8ZPT13FS-B5-A8ZPT16FS-B5-A8
ZPT20FS-B5-A10ZPT25FS-B5-A10ZPT32FS-B5-A10ZPT40FS-B5-A14ZPT50FS-B5-A14
� Female thread vacuum entry
� Female thread vacuum entry
Pad Ø [mm]
1013162025324050
Vacuum entry
M5 x 0.8
M8 x 1.25
Part Number
NBR SiliconeZPT10FN-B5ZPT13FN-B5ZPT16FN-B5ZPT20FN-B5ZPT25FN-B5ZPT32FN-B5ZPT40FN-B8ZPT50FN-B8
ZPT10FS-B5ZPT13FS-B5ZPT16FS-B5ZPT20FS-B5ZPT25FS-B5ZPT32FS-B5ZPT40FS-B8ZPT50FS-B8
Mounting thread (male)
Part Number
NBR
Pad Ø[mm]
VacuumEntry
Silicone
ZPT40HN-A14ZPT50HN-A14ZPT63HN-A16ZPT80HN-A16
ZPT100HN-A16ZPT125HN-A16
40506380100125
Rc 1/8"
M14 x 1
M16 x 1.5
ZPT40HS-A14ZPT50HS-A14ZPT63HS-A16ZPT80HS-A16
ZPT100HS-A16ZPT125HS-A16
Part Number
NBR Silicone
ZPT40HBN-A14ZPT50HBN-A14ZPT63HBN-A16ZPT80HBN-A16ZPT100HBN-A16ZPT125HBN-A16
ZPT40HBS-A14ZPT50HBS-A14ZPT63HBS-A16ZPT80HBS-A16ZPT100HBS-A16ZPT125HBS-A16
Flat type Bellows type
Part Number
NBR
Pad Ø[mm]
VacuumEntry
Silicone
ZPT40HN-B8ZPT50HN-B8ZPT63HN-B8ZPT80HN-B8
ZPT100HN-B12ZPT125HN-B12
40506380100125
M8 x 1.25
M12 x 1.75
ZPT40HS-B8ZPT50HS-B8ZPT63HS-B8ZPT80HS-B8
ZPT100HS-B12ZPT125HS-B12
Part Number
NBR Silicone
ZPT40HBN-B8ZPT50HBN-B8ZPT63HBN-B8ZPT80HBN-B8ZPT100HBN-B12ZPT125HBN-B12
ZPT40HBS-B8ZPT50HBS-B8ZPT63HBS-B8ZPT80HBS-B8
ZPT100HBS-B12ZPT125HBS-B12
Flat type Bellows type
12
� Spare parts: vacuum pad
� Accessory: buffer
� Accessory: ball-joint buffer
� Heavy duty vacuum pads (Ø 150-340 mm)
Pad Ø [mm]
40506380100125
Part Number flat type
NBR SiliconeZP40HNZP50HNZP63HNZP80HN
ZP100HNZP125HN
ZP40HSZP50HSZP63HSZP80HS
ZP100HSZP125HS
Part Number bellows type
NBR SiliconeZP40HBNZP50HBNZP63HBNZP80HBN
ZP100HBNZP125HBN
ZP40HBSZP50HBSZP63HBSZP80HBS
ZP100HBSZP125HBS
Pad Ø [mm]
150250300340
Part Number flat type
NBR SiliconeZP2-150HTNZP2-250HTNZP2-300HNZP2-340HN
ZP2-150HTSZP2-250HTSZP2-300HSZP2-340HS
Material∗ : aluminium alloy
Material∗ :steel
∗ Brass and stainless steel is also available upon request
∗ Brass is also available upon request
Add this accesory to a spare vacuum pad without adapter
Add this accesory to a spare vacuum pad without adapter
Pad Ø [mm]
40
50
63
80
100
125
Part Number(non-rotating type)
Vacuum entry
Mounting threadBuffer stroke
ZPB-T1J25-B01ZPB-T1J50-B01ZPB-T1J75-B01
ZPB-T2J25-B01ZPB-T2J50-B01ZPB-T2J75-B01
25mm50mm75mm
25mm50mm75mm
Rc 1/8”
Rc 1/8”
Rc 1/8”
25mm50mm75mm
100mm
ZPB-T3J25-B01ZPB-T3J50-B01ZPB-T3J75-B01
ZPB-T3J100-B01
Pad Ø [mm]
40
50
63
80
100
125
Part Number(non-rotating type)
Vacuum entry
Mounting threadBuffer stroke
ZP2B-TF1JF25ZP2B-TF1JF50ZP2B-TF1JF75
ZP2B-TF2JF25ZP2B-TF2JF50ZP2B-TF2JF75
ZP2B-TF2JF100
25mm50mm75mm
Rc 1/8”
Rc 1/8”
Rc 1/8”
25mm50mm75mm
100mm
25mm50mm75mm
100mmZP2B-TF3JF25ZP2B-TF3JF50ZP2B-TF3JF75
ZP2B-TF3JF100
Vacuum Pads
M18 x 1.5
M18 x 1.5
M22 x 1.5
M18 x 1.5
M18 x 1.5
M22 x 1.5
rass is also availaabt
13
Vacuum Ejectors
2
4
6
8
10
13
16
20
25
32
40
50
63
80
100
125
150
200
250
Pressure voltage output compatible
Filter compatibleValve compatible
Air consumption[L/min (ANR)]
Max. suction flow rate[L/min (ANR)]
Nozzle diameter [mm]
Appearance
Weight [g]
Tube diameter [mm] or port size
Single unit/Width [mm]
Main applicable work type(Reference)
Features
Series
Applicable workpiece (Reference)
Manifold compatibleSilencer compatible
Digital pressure switch compatible
Guideline forapplicable pad diameters[mm]
36 4011 12 16 27 43 55 956.5 7.0
1.2 1.2 x 20.5 0.7 1.0 1.3 1.5 1.8 2.00.5 0.7
100 2005 12 24 40 55 65 857 12
63 12613 23 46 78 95 150 1859.5 19
Ø12 Rc 3/4Ø6 Ø6 Ø6 Ø10 Ø12 Ø12 Ø16
Large (Large leakage)Small/Medium/Large
Series ZH
All types of industry
Series ZU Series ZL
Small
Semiconductors/Electronic components
12.8 14.2 to 23
Ø6
Machine tools/Sheet metal/Woodworking machinery/
Packaging machinery
Suction flow rate is high relative to the outer diameter dimension due to the multistage ejector structure of the integrated type (integrating ejector, valve, pressure switch, etc.)
• Simple, lightweight types with ejector and silencer• The ZU is a straight type that requires little mounting space.
14
Vacuum Ejectors
Vacuum Ejectors
0.5 0.7 1.0 0.7 1.0 1.2
5 10 22 29 44 61
14 23 46 24 40 58
1.5
67
90
2
4
6
8
10
13
16
20
25
32
40
50
63
80
100
125
150
200
250
Pressure voltage output compatible
Filter compatibleValve compatible
Air consumption[L/min (ANR)]
Max. suction flow rate[L/min (ANR)]
Ø2, Ø3.2, Ø4 Ø6, Ø8M5, Ø3.2, Ø4, Ø6
Nozzle diameter [mm]
Appearance
Weight [g] 109
Tube diameter [mm] or port size
Single unit/Width [mm] 15
Semiconductors/Electronic components/
Liquid crystals/Packaging machinery
Main applicable work type(Reference)
FeaturesModular type
(Equipment can be selected andcombined as necessary.)
Series ZQSeries ZBSeries Series ZK2
Applicable workpiece (Reference) Ultra-small Small Small/Medium/Large
46
Handlers/MountersSemiconductors/
Electronic components
8110 10
Manifold compatibleSilencer compatible
Digital pressure switch compatible
Guideline forapplicable pad diameters[mm]
Small and lightweight, so it can be installed near the hand. Enables speedy adsorption and release.
0.2 0.4
2 3.5
3.5 6.5
0.5
45
10
0.6
7
18
15
� Vacuum Ejector Inline Series ZU
• Plug connection Ø 6 mm.• Superior suction capacity (L type).• Can be mounted directly to the suction pad.• Light, compact design.• Nozzle diameter Ø 0.5 or 0.7 mm.
Nozzle Ø [mm]
0.50.70.50.7
Part number Suction cap.[L/min]
Port Max. vacuumpressure
ZU05SZU07SZU05LZU07L
7101216
ø6
ø6
-84 kPa
-48 kPa
� Vacuum Ejector Series ZH
• 2 models: tube or case type.• Light, compact design.• Nozzle diameter Ø 0.5, 1, 1.3 mm.• With built-in one-touch fittings or female
thread.• Case type has built-in silencer.
� Air Amplifier Series ZH-X185
• Energy efficiency - 1:4• Instant on-off control.• Air driven - no electrical supply required.• It is a flow amplifier not a pressure booster.• It can replace electrical fans.
It uses the Coanda effect to produce 3 times suction flow and 4 times discharge flow higher than the supply flow.
Nozzle Ø [mm]
0.51.01.30.51.01.3
Part number
Note ) Threaded port connections are also available upon request.
Note ) Bracket is included.
Suction cap.[L/min]
Port
Air VacuumMax. vacuum
pressureModel
Model D,tube type without
silencer
Model B,case type
with silencer
ZH05DS-06-06-06ZH10DS-06-06-08ZH13DS-08-10-10
ZH05BS-06-06ZH10BS-06-06ZH13BS-08-10
ø6ø6ø8ø6ø6ø8
ø6ø6
ø10ø6ø6
ø10
524405
2440
-88 kPa
-88 kPa
Part numberSuction flow
rate at 5 bar. [L/min]
Passage diameter
[mm]
Supply pressure
range
Vacuum pressure at 5
bar supply [kPa]
ø13ø21.6ø30ø42
0 to 0.7 MPa
520120023003400
-6
Part numberDischarge flow at 5 bar supply
[L/min]
ZH10-B-X185ZH20-B-X185ZH30-B-X185ZH40-B-X185
ZH10-B-X185ZH20-B-X185ZH30-B-X185ZH40-B-X185
700160030004700
Air consumption at 5 bar supply
[L/min]
180400700
1300
Weight [g]
110430970
2000
4 times Discharge3 timesSuction
Air supply
Vacuum ejectors
16
� Compact vacuum unit Series ZB Nozzle Ø
[mm]
0.4
0.6
0.4
0.6
Part number
Single units (N.C. supply valve, N.C. release valve, 24 VDC)
Ejector module - Single units (N.C. supply valve, N.C. release valve, 24 VDC)
Ejector module
Control module
Manifold unit Single unit
Manifold unit Single unit
Manifold unit Single unit
Suction cap.[L/min]
Port specification
PortAir (PV, PD) Vacuum (V)
Max. Vacuumpressure
ZB0411-K15L-C4
ZB0611-K15L-C4
ZB0421-K15L-C4
ZB0621-K15L-C4
3.5
7
3.5
7
ø4 mm -90 kPaM5 thread depth 4
� Space Saving Vacuum Ejector/ Vacuum Pump System Series ZQ
• Compact and lightweight: can be mounted on moving parts.
• High speed absorption: direct operated supply valve and reduction of internal volume.
• Energy saving design: lower supply pressure.• Digital vacuum switch with copy function
available as option.
• Single unit with vacuum pressure switch and suction filter.
• Width 10mm.• Easy to use vacuum pressure switch:
- Digital vacuum pressure switch LED with display.
- Push button type provides easy operation.- Copy function.
• 2 NPN/PNP outputs.• With one-touch fitting.
� Vacuum unit Series ZK2
Nozzle Ø [mm]
1.0
Part number
Note) Other sizes, options, manifold and vacuum pump system versions available upon request.
Note) Other sizes, options, manifold and vacuum pump system versions available upon request.
Note 1) Models with digital vacuum switch available upon request
Note 2) Manifold versions available upon request
Suction cap.[L/min]
Switch output Max. vacuumpressure
ZQ1101U-K1Y5L-EBG-00-Q 2 x PNP 22 -80 kPa
Ejector module - Single units (N.C. supply valve, N.C. release valve, 24 VDC)
Nozzle Ø [mm]
0.71.01.21.5
Part numberSuction cap.
[L/min]Switch output
Switch pressure range [kPa]
Max. vacuumpressure
ZK2A07K5CL-06ZK2A10K5CL-06ZK2A12K5CL-08ZK2A15K5CL-08
2 x PNP2 x PNP2 x PNP2 x PNP
0 ~ -101
29446167
-91 kPa
Ejector module - Single units (N.C. supply valve, N.C. release valve, 24 VDC)with energy saving vacuum switchNozzle Ø
[mm]
0.71.01.21.5
Part numberSuction cap.
[L/min]Switch output
Switch pressure range [kPa]
Max. vacuumpressure
ZK2A07K5RW-06ZK2A10K5RW-06ZK2A12K5RW-08ZK2A15K5RW-08
2 x PNP2 x PNP2 x PNP2 x PNP
100 ~ -100
29446167
-91 kPa
PV, PD
PDPV
Filter Ejector unit
Restrictor for vacuum release flow adjustment
Pad side
Vacuum release valve
Supply valve
Pressure switchfor vacuum
Control unit
Vacuum pump
Pad side
Vacuum switch valve
Pressure switch for vacuum
Vacuum release valve
Filter
Outstanding energy saving benefits: • Energy saving switch turns off supply valve
when vacuum level is reached reducing air consumption. Vacuum level is kept by check valve. Supply valve is turned on again when the vacuum lowers to the set pressure.
• Two-stage ejector reduces air consumption and increases suction flow rate.
• Supply valve with self-holding function.• Interlink between supply valve and release valve.
Vacuum Ejectors
Series ZK2
17
� Vacuum ejector Series ZL
• Filters intake air before the vacuum ejector.• Large filter element increases service life.• Light, compact design. • Stackable.• Filter element replaced quickly and easily.
• Compact design.• 3 different types:
Ejector + vacuum switch. Ejector + vacuum gauge.Only ejector.
• Vacuum built by 3 stage ejector thereforeless air consumption.
• Nozzle diameter 1.2 mm.• Suction capacity 100 L/min or 200 L/min
with ZL212.
� Vacuum filter Series ZFA
� Vacuum filter Series ZFB
Nozzle Ø [mm]
1.2
2 x 1.2
Part numberSuction cap.
[L/min]Type
Max. vacuumpressure
ZL112-Q
ZL112-G-Q
ZL112-K15MZ-DPL-Q
ZL212-Q
ZL212-G-Q
ZL212P-DPL-Q
StandardStandard with vacuum meter
Standard with vacuum switch
and control valves
Standard
Standard with vacuum meter
Standard with vacuum switch
Switch output
—
—
1 x PNP
1 x PNP
1 x PNP
1 x PNP
100
200
-84 kPa
-84 kPa
Part numberFlow
[L/min]Port size
ZFA100-F01
ZFA200-F02
G1/8”
G1/4”
50
200
Part numberReplacement filterMounting bracket
ZFA100EJ001H-030N
BP-1H-1A
ZFA200EJ101H-030N
BP-1H-2A
Part numberFlow
[L/min]Proof pressurePort ø [mm] Filtration degree
Proof pressure Filtration degree
ZFB100-04ZFB100-06ZFB200-06ZFB200-08ZFB300-08ZFB300-10
46688
10
102030507575
ModelPart number
ZFB100I-34S-A
ZFB200I-35S-A
ZFB300I-36S-A
• 360° rotation.• Prevents soiling in the vacuum ejector.• Integrated one touch fittings for simple
mounting. • Filter element quickly replaced.
Other products for vacuum
Accessories
Vacuum
2 port valve
ZFA vacuum filter ZFA vacuum filter
Vacuum switchVacuum switch
Air
0.5 MPa 30 μm
0.5 MPa 30 μm
Replacement filter element
Application with vacuum pump
18
� Vacuum filter Series ZFC
� Water separator for vacuum Series AMJ
� Flow Sensor and Voltage Monitor Series PFMV
Part number Rated flow range
0.0 to 0.5 L/min0.0 to 1.0 L/min0.0 to 3.0 L/min-0.5 to 0.5 L/min-1.0 to 1.0 L/min-3.0 to 3.0 L/min
Output specification
Analogue output(1 to 5V)
12~24 VDC
Voltage
Part number Applicable sensor
PFMV5��-1(voltage input)
Output specification
2 PNP outputs+ 1 to 5 V output
2 PNP outputs+ 4 to 20 mA output
2 PNP outputs+ auto shift input
12~24 VDC
Voltage
Part numberFlow
[L/min]Port ø [mm]
Filtrationdegree
ZFC050-02BZFC050-23BZFC050-04BZFC100-04BZFC100-06BZFC200-06BZFC200-08B
23.244668
27
1010203050
Part numberFlow
[L/min] min.
PFMV3
PFMV5
max.Port size
AMJ3000-F02AMJ3000-F03AMJ4000-F03AMJ4000-F04AMJ5000-F06AMJ5000-F10
G 1/4”G 3/8”G 3/8”G 1/2”G 3/4”G 1”
200
300
500
-0.1 MPa 1.0 MPa
ModelPart number
ZFC050I-68S-A
ZFF100I-62S-A
ZFF200I-63S-A
• At least 90% of the water that is sucked in is removed.
• Manual discharge mechanism.• Bayonet socket simplifies filter element
replacement. • Bowl protection standard.
• Compact, lightweight, resin design.• Filter element simply replaced using
bayonet socket. • Easily mounted with one touch fittings. Less
air consumption, by the nozzle.• Transparent polycarbonate permits visual
checking of soiling level.
Other Products for Vacuum
10 μm
Accessory-Filter element
Flow Sensor
Operating pressure
• Suction check of very small workpieces.• PFMV5: Flow sensor.
PFMV3: Voltage monitor for PFMV5.• Reduced piping space.• Response speed: 5 ms or less.• Applicable fluid: dry, air, N2.
Power supply / output connector (2 m)BracketSensor connectorPanel mount adapterPanel mount adapter + front protective cover
ZS-28-AZS-28-BZS-28-CZS-27-CZS-27-D
Accessories
PFMV505-1PFMV510-1PFMV530-1PFMV505F-1PFMV510F-1PFMV530F-1
Voltage Monitor
PFMV303-M
PFMV304-M
PFMV305-M
19
� 2- Colour Display Digital Flow Switch Series PFM Part number
Supplyvoltage
OperatingPressure Range
0.2 to 10 L/min0.5 to 25 L/min1 to 50 L/min
2 to 100 L/min
0.2 to 5 L/min0.5 to 12.5 L/min
1 to 25 L/min2 to 50 L/min
Part number OutputSupplyvoltage
OperatingPressure Range
0.2 to 10 L/min0.5 to 25 L/min1 to 50 L/min
2 to 100 L/min
0.2 to 5 L/min0.5 to 12.5 L/min
1 to 25 L/min2 to 50 L/min
Part number NoteInput specification Output specification
PFM313-LFPFM314-LF
Current input2 PNP + 1 to 5 V outputs
2 PNP + 4 to 20 mA outputsWith power and sensorconnectors included
• For dry air, N2, Ar, CO2.• A digital flow switch that uses MEMS sensor
for detecting the flow. • Compact size.• Improved visibility with two colour display
indication.• Two piping directions are possible.• Integrated flow adjustment valve.• Multiple mounting combinations.
� Digital Pressure Switch Series ZSE10
Part number
• Reduced in depth: 9.8 mm• 2 styles: ZSE10: vacuum pressure. ZSE10F: compound pressure. • Can copy up to 10 switches simultaneously. • Analogue output: 1-5 V.• Switch output: 2 NPN/PNP or 1 PNP/NPN.• Multi-angle indicator.• Piping is possible from two directions.• Mounting: direct mounting, panel mounting,
DIN rail mounting.
Panel mount adapter Panel mount adapter + Front protective cover DIN rail adapter
ZS-39-BZS-39-DZS-39-R
Mounting accessories
ZSE10-M5-B-GZSE10F-M5-B-G
0 to -101 kPa-100 to 100 kPa
M5 female thread / Side ported 12-24 VDC
PNP open collector2 outputs
Pressure range Port size VoltageSwitch outputs
� Adjustable Vacuum Pressure Switch with Display Series ZSE30A
• 2 styles: ZSE30A: vacuum pressure. ZSE30AF: compound pressure.
• Enclosure IP40.• Large, easy-to-read display.• 2 colour (green/red) display.• Easy operation: 3-step setting and copy display.• Analogue output: 4 - 20 mA or 1 - 5 V.• Switch output: 2 PNP/NPN or 1 PNP/NPN.• With straight and elbow one-touch fittings.
Part number Output
12~24 V DC
NPN options available upon request.
Mounting accessories
SupplyVoltage
Flow rateDry air, N2, Ar
Flow rateCO2
24 V DC-100 kPa to
750 kPa
∗ Flow adjustment valve
F01F02C4C6C8
SymbolFlow rate range
G1/8G 1/4
Ø4 one touch fittingØ6 one touch fittingØ8 one touch fitting
∗∗ Port size (straight piping)
Description11
•
••
•
••
•
••
•
••
10 5025
Flow sensor monitor
PFM710 ∗ − ∗∗ − ∗∗∗PFM725 ∗ − ∗∗ − ∗∗∗PFM750 ∗ − ∗∗ − ∗∗∗PFM711 ∗ − ∗∗ − ∗∗∗
Integrated type
Flow rateDry air, N2, Ar
Flow rateCO2
24 V DC
—S
Without flow adjustment valveWith flow adjustment valve
-100 kPa to 750 kPa
PFM510 ∗ − ∗∗ − 2PFM525 ∗ − ∗∗ − 2PFM550 ∗ − ∗∗ − 2PFM511 ∗ − ∗∗ − 2
Remote type
Analogue(4-20mA)
∗∗∗ PFM7 - Output specificationBEF
2 PNP outputs1 PNP output +Analogue (1 to 5 V)
1 PNP output + Analogue (4 to 20 mA)
ZSE30A-01-B-GZSE30A-01-F-GZSE30AF-01-B-GZSE30AF-01-F-G
0 to -101 kPa
-100 to 100 kPa
R1/8(with M5female
threaded)
PNP open collector 2 outputsPNP open collector 1 output + 4-20 mA output
PNP open collector 2 outputsPNP open collector 1 output + 4-20 mA output
Pressure range Port size
Bottom bracket Side bracket Panel mount adapter Panel mount adapter + Front protective cover
ZS-38-A1ZS-38-A2ZS-27-CZS-27-D
20
• Sensor and controller separate.PSE530: - IP40.- Simple electr. connection using plug.- Minimal response times.PSE200:- Controller for 4 sensor inputs.- Autom. sensor recognition.- Auto shift function.
� Vacuum and Pressure Sensor with Controller Unit Series PSE530/200
PSE540• Micro design, e.g. 9.6 x 20.8 x 18 mm.• Minimal weight, e.g. 3.2 g.• 7 different connection types PSE300.• 1 ms response time.• 2 colour display determined by switching
status.• 2 switch outputs and analogue output.
� Micro Vacuum and Pressure Sensor with Controller Unit Series PSE540/300
Part number Pressure range Output signalConnection type
PSE541-M3PSE541-M5PSE541-01PSE541-R04PSE541-R06PSE541-IM5PSE541-IM5HPSE543-M3PSE543-M5PSE543-01PSE543-R04PSE543-R06PSE543-IM5PSE543-IM5H
M3 maleM5 malemale R1/8, female M5Ø 4 mm one-touch fi ttingØ 6 mm one-touch fi ttingM5 female threadM5 female, with mounting holesM3 maleM5 malemale R1/8, female M5Ø 4 mm one-touch fi ttingØ 6 mm one-touch fi ttingM5 female threadM5 female, with mounting holes
Low Pressureand Vacuum:0 ~ -101 kPa
Low Pressureand Vacuum:
-100 ~ +100 kPa
Analogue 1 ~ 5 V
Sensor cable with plugProtective cover for PSE201Panel mounting adapter for PSE201Plug set (4 pieces)
AccessoriesZS-26-J
ZS-26-01ZS-26-BZS-26-E
PSE201-4C
Output
Panel mounting
Mounting
5 ms
Response time
Controller Unit
5 PNP
Note
With 4 sensorconnectors
Sensor
Part numberPressure range
Outputsignal
Thread connection
PSE531-M5PSE533-M5
M5 0 ~ -101 kPa-101 ~ 101 kPa
Analogue 1~ 5 V
Part number
Part numberPSE303-LAC
Noteincl. supply cable, bracket, sensor plug
Controller UnitResponse time
1msSwitch output
2 x PNP + analogue
Sensor
Other Products for Vacuum
� Adjustable Vacuum Pressure Switch with Display Series ZSE40A
Part number Output
ZSE40A-01-TZSE40A-01-VZSE40A-01-YZSE40AF-01-TZSE40AF-01-VZSE40AF-01-Y
Vacuum Pressure0 ~ –101.3 kPa
Vacuum low Pressure-100 ~ +100 kPa
2 PNP + (1-5 V)PNP + (4-20 mA)
2 PNP2 PNP + (1-5 V)
PNP + (4-20 mA)2 PNP
12~24 V DCmale: R 1/8female: M5
NPN options available upon request.Note 1) Also available with ø 4 or ø 6 mm one touch fitting.
Mounting accessories
• 2 styles:ZSE40A: vacuumZSE40AF: vacuum & low pressure combination.
• Enclosure IP65.• Easy handling, space saving.• 2 colour (green/red) display.• Easy operation: 3 step setting and copy
function.• Analogue output: 4-20 mA or 1.5 V.• Switch output: 2 PNP/NPN.
Voltage
Bottom bracket Rear bracket Panel mount adapter Panel mount adapter + Front protective cover
ZS-24-AZS-24-BZS-35-CZS-35-F
Pressure range Port size
21
� Air Checker: Electronic Pressure Switch Series PS1000•1100•1200
• LED switch point display.• Miniature design.• Mounted directly to one-touch fi ttings.• Piezo sensor gives long service life.• Pluggable directly into plug connections
of Ø 6 mm.
• 1/8” or 1/4” port on rear side.• Also available for panel mounting.
� Pressure Gauge for Vacuum Series GZ46
• Standard and single sided connections(elbow, straight).
• Integrated digital pressure switch forpanel mounting.
• Easy to attach/dettach the pressuregauge or digital pressure switch due toattachment by clip.
• Built-in one-touch fi ttings.
� Vacuum Regulator Series IRV10/20
Part numberOperatingposition Contact point
Operatingpressure range
PS1000-R06L-QPS1100-R06L-QPS1200-R06L-Q
-0.1 - 1.0 MPa
-100 to 0 kPa
Pressure ≥ switch point: ONPressure ≤ switch point: ONPressure ≤ switch point: ON
12~24 V DC-0.1 - 0.45 MPa -0.1 - 0.40 MPa-100 to 0 kPa
Part numberOperation
temperature range ConnectionPressure range Tubing O. D.
IRV10-C06IRV10-C08IRV20-C06IRV20-C08IRV20-C10IRV10A-C06IRV10A-C08IRV20A-C06IRV20A-C08IRV20A-C10
ø6ø8ø6ø8ø10ø6ø8ø6ø8ø10
-100 ~ -1.3 kPa +5° ~ +60°C
Standardconnections
Single sidedconnections
With 3m cable
Part number Display Port Size DiameterMounting
GZ46-K-01GZ46-K-01-CGZ46-K-02GZ46-K-02-C
DirectPanel mounting
DirectPanel mounting
-100 KPa ~ 0 kPa 42.5 mmR1/8
R1/4
Bracket assemblyBottom bracket assemblyPressure Gauge assemblyDigital switch assembly
IRV10(A)P601010-17P601010-14P601010-12
P601010-13 ∗
IRV20(A)P601020-17P601020-14P601020-12
P601020-13 ∗
Compressed Air Micro Sensor
Accessory
Symbol24
SpecificationPNP open collector 1 outputPNP open collector 2 outputs
∗
Voltage
Sensor
Suction monitoring
Vacuum
22
ITV0090-0∗
ITV0090-3∗
• 2 types:- ITV2090: standard- ITV0090: compact
• Vacuum can be steplessly regulated.• Compact and lightweight.• ITV2090: Fieldbus compatibility:
- reduced wiring- RS-232C serial communications
• ITV0090:- built-in one-touch fittings- with error indication LED- high speed response: 0.1s- high stability
• Enclosure IP65.
• Sizes Ø 10 - 32 mm.• Suction pads mounted directly to the
hollow double piston rod.• Non rotating piston rod is standard.• Vacuum pads from Ø 2 to 50 mm.• Auto switch for end position detection
with LED in 2 wire type, can be mountedon 2 sides.
AK• Superior fl ow capacity.• Low cracking pressure : 0.02MPa.• Port size from 1/8” to 1”.
AKH/AKB• Select from 3 designs.• One-touch fi tting both sides.• Male thread/female thread.• Male thread/one-touch fi tting.• Low cracking pressure.
� Compact Cylinder for Vacuum Applications Series ZCDUKC
Part numberOutput signal
Operationvoltage
Pressurerange [KPa]
Controlsignal
ITV2090-01F2N5ITV2090-03F2N5ITV2090-31F2N5ITV2090-33F2N5ITV0090-0NITV0090-3N
4 ~ 20 mA/DC
0 ~ 10 VDC
4 ~ 20 mA/DC0 ~ 10 VDC
G1/4
One-touchfittings ø4
-1.3 ~ -80
-1 ~ -100
130
2
24 VDC
Analogue 1-5 V DCPNP, 30 mA
Analogue 1-5 V DCPNP, 30 mAAnalogue1-5 V DC
Communication cable (other then RS-232C)should be obtained separately. Consult SMC.
∗∗∗∗∗∗
∗ ∗
Part numberStandard stroke lengths
[mm]Piston rod
thread Port SizePiston Ø
[mm]
ZCDUKC10-�DZCDUKC16-�DZCDUKC20-�DZCDUKC25-�DZCDUKC32-�D
� Stroke length
1016202532
M4M5M6M8
M10
5, 10, 15, 20,25, 30
5, 10, 15, 20,25, 30, 40, 50
M5
G1/8
Type
Checkvalve
Port sizeMetric Size Inch Size
Applicable tubing O.D.Series
In-line typeStraight typeMale connector typeBushing type
AK2000/4000/6000
AKH
AKB
-ø4 to ø 12ø4 to ø 12
-
1/8” to 1”-
M5 to 1/2”1/8” to 1/2”
-ø5/32 to ø1/2ø5/32 to ø1/2
-
ITV2090-0∗
ITV2090-3∗
ITV2090-DE∗
ITV2090-PR∗
ITV2090-RC∗
Power
Communication
Power
Communication
Power
Communication
—
—
AccessoryPart number Cable Connector
P398020-500-3 (Straight)P398020-501-3 (Right angle)P398020-504-3 (Straight)P398020-505-3 (Right angle)PCA-1557633 (Socket type)PCA-1557646 (Plug type)P398020-500-3 (Straight)P398020-501-3 (Right angle)PCA-1557688 (Socket type)PCA-1557691 (Plug type)P398020-500-3 (Straight)P398020-501-3 (Right angle)P398020-502-3 (Straight)P398020-503-3 (Right angle)M8-4DSX3MG4 (Straight)P398000-501-2 (Right angle)
Reed: 3 wire solid state:2 wire solid state:
Auto switchD-A93L
NPN: D-M9NL, PNP: D-M9PLD-M9BL
ITV2090-�F2N
Fieldbus compatibility:Part number Description
Control signal �:DE: DeviceNetTM
PR: PROFIBUS DPRC: RS-232C
Communication
� Electronic Vacuum Regulator Series ITV0090/2090
� Check Valve with One-touch fittings Series AK
Other Products for Vacuum
Portthread
Flow[L/min]
23
0.351.0
Control valves for vacuum
� Vacuum Release Unit Series VQD1000-V
� 3 Port Series V100
� 3 Port/Direct Operated Poppet Series VKF300
VQD1000-V 16-101.2
kPa
Model Suction flowrate (L/min)
Vacuumuse
StandardLow Voltage
152129
42
-101.2kPa
Model [NL/min] Power[W]
Vacuumuse
StandardHigh flow
8.417
-100 kPa
Model [NL/min] Power[W]
Vacuumuse
� 3 Port/Direct Operated/Poppet Series VT307/317/325
� 3 Port/Pilot Poppet/Air operated Series VP(A)300/500/700
� 3 Port/Pilot Poppet Series VG342
VG342 12858 4.8 -101.2kPa
Model [NL/min] Power[W]
Vacuumuse
VP(A)300VP(A)500VP(A)700
102321323707
1.55 (0.55:with power
saving circuit)
-100 kPa
Model [NL/min] Power[W]
Vacuumuse
VT307VT317VT325
206687
1374
4.86.012
-101.2kPa
Model [NL/min] Power[W]
Vacuumuse
� Direct Operated 2 Port Valve Series VX21/22/23 Air, Gas, Vacuum, Water, Steam, Oil
� Direct Operated 3 Port Valve Series VX31/32/33 Air, Gas, Vacuum, Water, Steam, Oil
� 2 port valve for flow control Series VNB
Air, Water , Gas, Oil and Vacuum
N.C./N.O. 1/8" to 1/2" 2 to 10Up to
0.1 Pa abs
Actuation Port size
Orifice dia.[mm ø]
Vacuumuse
N.C./N.O./C.O. 1/8" to 3/8" 1.5 to 4
Up to0.1 Pa abs
Actuation Port size
Orifice dia.[mm ø]
Vacuumuse
N.C./N.O./C.O. 1/8" to 2" 7 to 50
Lowvacuum
Actuation Port size
Orifice dia.[mm ø]
Vacuumuse
The selection of the vacuum components for your application is now easier
LEA
F-VA
CU
UM
01A
-UK
ww
w.s
mc.
eu
Lithuania +370 5 2308118 www.smclt.lt [email protected] +31 (0)205318888 www.smcpneumatics.nl [email protected] +47 67129020 www.smc-norge.no [email protected] +48 (0)222119616 www.smc.pl [email protected] +351 226166570 www.smc.eu [email protected] +40 213205111 www.smcromania.ro [email protected] +7 8127185445 www.smc-pneumatik.ru [email protected] +421 (0)413213212 www.smc.sk [email protected] +386 (0)73885412 www.smc.si [email protected] +34 902184100 www.smc.eu [email protected] +46 (0)86031200 www.smc.nu [email protected] +41 (0)523963131 www.smc.ch [email protected] +90 212 489 0 440 www.smcpnomatik.com.tr [email protected] UK +44 (0)845 121 5122 www.smcpneumatics.co.uk [email protected]
Specifications are subject to change without prior notice and any obligation on the part of the manufacturer.SMC CORPORATION Akihabara UDX 15F, 4-14-1, Sotokanda, Chiyoda-ku, Tokyo 101-0021, JAPAN Phone: 03-5207-8249 FAX: 03-5298-5362
1st printing QR printing QR 00 Printed in Spain
Austria +43 (0)2262622800 www.smc.at [email protected] +32 (0)33551464 www.smcpneumatics.be [email protected] +359 (0)2807670 www.smc.bg [email protected] Croatia +385 (0)13707288 www.smc.hr [email protected] Republic +420 541424611 www.smc.cz [email protected] Denmark +45 70252900 www.smcdk.com [email protected] Estonia +372 6510370 www.smcpneumatics.ee [email protected] +358 207513513 www.smc.fi [email protected] +33 (0)164761000 www.smc-france.fr [email protected] +49 (0)61034020 www.smc.de [email protected] +30 210 2717265 www.smchellas.gr [email protected] +36 23511390 www.smc.hu [email protected] +353 (0)14039000 www.smcpneumatics.ie [email protected] +39 0292711 www.smcitalia.it [email protected] +371 67817700 www.smclv.lv [email protected]
SMC Corporation (Europe)
• Automatic selection of optimal product group meeting requirements Minimum part number of each device satisfying the requirements is automatically selected only by specifying series names, such as vacuum pad, vacuum ejector, piping, and control valve.
• Applicable to various target circuits Applicable to various target circuits consisting of release valve and restrictor for adjustment of
the vacuum break flow rate based on units or single ejector system and vacuum pump system.
• Simultaneous calculation of absorption time and vacuum break time Not only the vacuum absorption time, but also the vacuum break time is simultaneously
calculated from the vacuum break pressure and the opening of the restrictor for adjustment of the vacuum break flow rate.
You can download your free copy of this software at www.smc.eu