(V8 Turbo/After Cooled) —— Power Unitscw-yournewsite.com/Natural-gas-Doosan-Rev-L.pdf · Power...
Transcript of (V8 Turbo/After Cooled) —— Power Unitscw-yournewsite.com/Natural-gas-Doosan-Rev-L.pdf · Power...
Natural Gas Power Units
Built specifically for continuous
duty on Natural gas
Power units or Gensets
Reliable Service
EPA Certified
Engines Available
All Gensets are 12 lead, 3 phase capable, Marelli generators. KW rating may
vary depending on phase, voltage requirements, and application
●Call for prices (330) 275-7177●
●Custom sizes are available, call for price and availability ●
Rev: L 10/13/2015
Doosan Engines 89 to 504 HP
● 8.1 Liter (6 Cyl. Naturaly Aspirated) —-- 89 HP
● 8.1 Liter (6 Cyl. Turbo/After Cooled) —- 182 HP
● 11.1 Liter (6 Cyl. Turbo/After Cooled) — 254 HP
● 14.6 Liter (V8 Turbo/After Cooled) ——-336 HP
● 18.3 Liter (V10 Turbo/After Cooled) ——424 HP
● 21.9 Liter (V12 Turbo/After Cooled) ——-504 HP
Gensets Available
●Smaller sizes (21-160 hp automotive style) are available call for info●
●HP ratings are Prime Power at 1800 RPM●
● 60 Kw - 8.1L NA Engine
● 122 Kw - 8.1L TA Engine
● 170 Kw - 11.1L Engine
● 225 Kw - 14.6L Engine
● 284 Kw - 18.3L Engine
● 340 Kw - 21.9L Engine
Kw Ratings are Prime Power @1800 rpm, 60Hz
Office - (330) 893-0242 Fax- (330) 232-9994 Cell- John Yoder (330) 473-9222 E-mail: [email protected] www.bunkerhillengine.com
Bunker Hill Engine 6019 County Road 77 Millersburg, OH 44654
Who is NG Engine?
NE Engine Inc. is a sister company of Power
Solutions Inc. and Power Great Lakes. PGL is
the Largest 12 state Perkins distributer in
North America. PSI is the largest industrial
gas and alternative fuel engine provider in
North America, they build GM natural gas en-
gines. NGE is a result of a partner ship be-
tween PSI and Doosan-Infracore that com-
bines the best of both to provide EPA certified
gas engines. NGE is located in Wood Dale Illi-
nois.
Who is Doosan?
Doosan-Infracore is a manufacturer of Diesel
and natural gas engines, construction equip-
ment, and machine tools. They have been in
business since 1937. The are based in Korea,
but have factories and distributors around the
world, including the USA.
Engine & Generator Controls
Power unit packages come with key switch
start, a Controls Inc. Electronic control panel,
and a shutdown/
cool-down timer.
Genset packages
include the same
plus voltage and
phase monitoring &
shutdown. Pictured
is the Genset con-
troller, the power unit controller is the same
except it shows engine speed instead of volt-
age, amps & Hz.
What is ‘Prime Power’ HP rating?
The prime power rating is applicable for variable
loads with limited number of operating hours per year. The
average power output shall not exceed 75% of the prime
power rating. The total time at 100% Prime power shall not
exceed 500 hours per year. A 110% overload rating is availa-
ble one hour in every twelve hours with the total hours at
110% not to exceed 25 hours per year. Maximum number of
hours per year is 2500. The Continuous Duty Rating is 75%
of the prime power rating. The Engine can be run at 75% of
prime power continuously 24 hours a day. Continuous Duty
ratings are as follows 8.1LNA=67, 8.1LTA=137,
11.1L=190, 14.6L=252, 18.3L=318, 21.9L=380.
What do I need to know about EPA
compliance?
Before you buy a natural gas engine, make sure
you understand EPA regulations. For diesel
engines it is simpler, all new engines have to be
EPA certified from the factory. It is illegal to
sell a non-certified diesel engine in the USA.
But, because natural gas quality varies across
the country there are loopholes in the EPA reg-
ulations that allow engine makers to sell non-
certified natural gas engines. However, any
engine sold as non-certified must pass an on-
site EPA test to be legally used in the USA. The
test and the cost of the test is the responsibility
of the end user. Our natural gas engines are
factory EPA certified for use with pipeline quali-
ty natural gas, no field testing is required. If
you have questions about EPA regulations we
recommend that you talk to an EPA consultant.
Call for more info.
Warranty
General warranty is 1 Year, 8,750 hours whichev-
er comes first. Warranty on emissions related
parts is 3 years, 2,500 hours. (emissions related
parts include; Fuel system, ECM & Electrical,
Turbo, Intake and exhaust manifold, Catalytic
converter, Belts, Pulleys, and Idlers) Starters and
alternators are covered for 1 year, 2000 hours.
All warranty claims are subject to approval by NG
Engine. Warranty on NACD Clutches is 1 year,
1,500 hours.
Cover picture: 11.1L Power Unit 14.6 Liter Power Unit
8.1 Liter Power Unit