v6 Injection Programming
-
Upload
octavio-lopez -
Category
Documents
-
view
215 -
download
0
Transcript of v6 Injection Programming
-
7/31/2019 v6 Injection Programming
1/2
GREEN TECHNICAL NOTE
EDITION ANGLAISE7
Service 00429
NOVEMBER 2004
77 11 326 502
CLIO 2 V6 Phase 2
LAGUNA II
AVANTIME
with L7X 721 722 731 762 engine
Production cut-offsType
CB1 U
BG0 D
BG0 Y
BG0 1
BG0 2
KG0 D
KG0 2
DE0 T
K 032725 to K 044967
S 521156 to S 648919
S 605001 to S 654769
S 300409 to S 655502
S 498393 to S 614440
S 401198 to S 470397
S 383678 to S 452698
T 000047 to T 004415
Engine: Gearbox:
17B REPROGRAMMING THE INJECTION COMPUTER: ERRATIC ACCELERATIONAND INJECTION WARNING LIGHT COMES ON
Other sub-section concerned: 83A
L7X 721 722 731 762
XXX
Basic manual:
Technical Note: 3585A
"The repair procedures given by the manufacturer in this document are based on thetechnical specifications current when it was prepared.
The methods may be modified as a result of changes introduced by the manufacturerin the production of the various component units and accessories from which hisvehicles are constructed".
All copyrights reserved by RENAULT.
Copying or translating, in part or in full, of this document or use of the service partreference numbering system is forbidden without the prior written authority ofRENAULT.
RENAULT 2004
-
7/31/2019 v6 Injection Programming
2/2
PETROL INJECTION SYSTEM
Injection programming 17B
17B-2
117BPETROL INJECTION SYSTEMInjection programming
TECHNICAL INFORMATION
Customer complaint
Injection warning light comes on.
Erratic acceleration.
Possible cause
Injection computer programming.
Fault finding
Confirm the customer complaint
No fault codes are displayed on the diagnostic tool.
Check the internal part number of the injection
computer using the diagnostic tool.
This Technical Note only applies to the following
injection computer part numbers:
Description of the operation
Reprogram the injection computer according toTechnical Note 3585A.
Note: when reprogramming is complete, note down
the codecal.
Carry out a basic road test in order to reinitialise
engine programming.
CLAIM COMPLETION AND CODING
When to take action
Upon receipt of a customer complaint.
Tooling required
CLIP installed with the latest update: tool CD
version no. 48 or more recent.
1 reprogramming CDversion no. 29 or more recent
Part No.: 77 11 298 859 or access to the NRE
application (New Electronic Programming on the
Renault Net).
Note: the latest version of the reprogramming CD
contains all of the information from previous CDs.
Time required
Codification items
With PGCS
Catalogue function:
Opecode cause: 0412
Without PGCS
NITG code: M4BR
With or without PGCS
Supplier code: 050
Customer complaint code: 1C, 1D, 7N
VehiclePart number before
reprogramming
CLIO 2 V6
phase 2
82 00 204 721
82 00 265 736
82 00 311 766
AVANTIME
Manual gearbox
82 00 053 932
82 00 119 366
82 00 155 990
82 00 172 323
82 00 181 472
82 00 204 722
AVANTIME
Automatic
gearbox
82 00 219 588
82 00 295 631
LAGUNA II 82 00 053 944
82 00 062 152
82 00 062 362
82 00 105 848
82 00 118 494
82 00 119 368
82 00 135 967
82 00 140 49282 00 162 233
82 00 164 23482 00 201 757
82 00 201 75982 00 219 586
82 00 265 717
82 00 295 429
82 00 331 367
Code Description Time
0412 Reprogramming petrol
injection type 5
0.7
0129 Basic road test 0.5
TOTAL 1.2
Description Code
Injection computer reprogramming 820