Conical ConnectionSurgical Kit

wall chart3

9

9

9

1

2

6

8

7

17

21

19

25 26 28 29

30

27

23

16

20

18

24

22

15

5

4 10 11 12

13 14

V3 Surgical Kit Content:

The tools shown are in proportion to one another

Key to code used:

Non sterile

ManufacturerBatch Code

Catalog Number

After mechanical or manual cleaning, all surgical instruments must be sterilized. The surgical kit can be fully sterilized in an autoclave at 134°C (273°F), for 6 minutes. Do not exceed 134°C.

CT-SSM30Short motor insertion tool for V3 implant, coni. con., SP

22

CT-P2410Pilot drill with built in stopper Ø2.4/2.0 height 10mm

5

CT-NLM30Long motor insertion tool for V3 implant, coni. con. NP

16

CT-SLM30Long motor insertion tool for V3 implant, coni. con., SP

20

21

CT-SLR30Long ratchet insertion tool for V3 implant, coni. con., SP

27

MT-DE001Drill extender

CT-SSR30Short ratchet insertion tool for V3 implant, coni. con., SP

23

CT-NLR30Long ratchet insertion tool for V3 implant, coni. con., NP

17

25

MT-RE160Int. connection abutment extractor, NP

CT-NSR30Short ratchet insertion tool for V3 implant, coni. con., NP

19

MT-PDM24Position drill mill Ø2.4mm

2

3

MT-PD440Position drill Ø4mm

MT-SMD10Spade marking drill

1

4

Pilot drill with built in stopper Ø2.4/2.0 height 8mmCT-P2408

MIS Implants Technologies GmbHSimeonscarre 2, 32423 Minden, GermanyTel: +49 571-972-7620 Email: service@mis-implants.de

EC REP

0483refers to drills only

MIS Implants Technologies Ltd.P.O.Box 7, Bar Lev Industrial Park, 2015600, ISRAELWebsite: www.mis-implants.com

CT-NSM30Short motor insertion tool for V3 implant, coni. con., NP

18

26

MT-RE172Int. connection abutment extractor

Long hex. drive 0.05 inch MT-RDL30

28

Short hex. drive 0.05 inch MT-RDS30

29

MT-BTI20Implant site depth probe

24

Torque wrench for implant placementMT-RT070

30

6

CT-P2411Pilot drill with built in stopper Ø2.4/2.0 height 11.5mm

CT-P2413Pilot drill with built in stopper Ø2.4/2.0 height 13mm

7

8

CT-P2416Pilot drill Ø2.4/2.0 height 16mm

9

CT-BTC24Body try in 2.40mm for tapered impl. procedure

10

CT-TDC30Step drill Ø3/2.4mm, external irrigation

11

CT-TDC35Step drill Ø3.5/3mm, external irrigation

12

CT-TDC40Step drill Ø4/3.5mm, external irrigation

13

CT-BTC30Body try in 3mm for tapered impl. procedure

14

CT-BTC35Body try in 3.50mm for tapered impl. procedure

15

CT-BTC40Body try in 4mm for tapered impl. procedure

Conical ConnectionSurgical Kit

wall chart3

9

9

9

1

2

6

8

7

17

21

19

25 26 28 29

30

27

23

16

20

18

24

22

15

5

4 10 11 12

13 14

V3 Surgical Kit Content:

The tools shown are in proportion to one another

Key to code used:

Non sterile

ManufacturerBatch Code

Catalog Number

After mechanical or manual cleaning, all surgical instruments must be sterilized. The surgical kit can be fully sterilized in an autoclave at 134°C (273°F), for 6 minutes. Do not exceed 134°C.

CT-SSM30Short motor insertion tool for V3 implant, coni. con., SP

22

CT-P2410Pilot drill with built in stopper Ø2.4/2.0 height 10mm

5

CT-NLM30Long motor insertion tool for V3 implant, coni. con. NP

16

CT-SLM30Long motor insertion tool for V3 implant, coni. con., SP

20

21

CT-SLR30Long ratchet insertion tool for V3 implant, coni. con., SP

27

MT-DE001Drill extender

CT-SSR30Short ratchet insertion tool for V3 implant, coni. con., SP

23

CT-NLR30Long ratchet insertion tool for V3 implant, coni. con., NP

17

25

MT-RE160Int. connection abutment extractor, NP

CT-NSR30Short ratchet insertion tool for V3 implant, coni. con., NP

19

MT-PDM24Position drill mill Ø2.4mm

2

3

MT-PD440Position drill Ø4mm

MT-SMD10Spade marking drill

1

4

Pilot drill with built in stopper Ø2.4/2.0 height 8mmCT-P2408

MIS Implants Technologies GmbHSimeonscarre 2, 32423 Minden, GermanyTel: +49 571-972-7620 Email: service@mis-implants.de

EC REP

0483refers to drills only

MIS Implants Technologies Ltd.P.O.Box 7, Bar Lev Industrial Park, 2015600, ISRAELWebsite: www.mis-implants.com

CT-NSM30Short motor insertion tool for V3 implant, coni. con., NP

18

26

MT-RE172Int. connection abutment extractor

Long hex. drive 0.05 inch MT-RDL30

28

Short hex. drive 0.05 inch MT-RDS30

29

MT-BTI20Implant site depth probe

24

Torque wrench for implant placementMT-RT070

30

6

CT-P2411Pilot drill with built in stopper Ø2.4/2.0 height 11.5mm

CT-P2413Pilot drill with built in stopper Ø2.4/2.0 height 13mm

7

8

CT-P2416Pilot drill Ø2.4/2.0 height 16mm

9

CT-BTC24Body try in 2.40mm for tapered impl. procedure

10

CT-TDC30Step drill Ø3/2.4mm, external irrigation

11

CT-TDC35Step drill Ø3.5/3mm, external irrigation

12

CT-TDC40Step drill Ø4/3.5mm, external irrigation

13

CT-BTC30Body try in 3mm for tapered impl. procedure

14

CT-BTC35Body try in 3.50mm for tapered impl. procedure

15

CT-BTC40Body try in 4mm for tapered impl. procedure

Conical ConnectionSurgical Kit

wall chart3

9

9

9

1

2

6

8

7

17

21

19

25 26 28 29

30

27

23

16

20

18

24

22

15

5

4 10 11 12

13 14

V3 Surgical Kit Content:

The tools shown are in proportion to one another

Key to code used:

Non sterile

ManufacturerBatch Code

Catalog Number

After mechanical or manual cleaning, all surgical instruments must be sterilized. The surgical kit can be fully sterilized in an autoclave at 134°C (273°F), for 6 minutes. Do not exceed 134°C.

CT-SSM30Short motor insertion tool for V3 implant, coni. con., SP

22

CT-P2410Pilot drill with built in stopper Ø2.4/2.0 height 10mm

5

CT-NLM30Long motor insertion tool for V3 implant, coni. con. NP

16

CT-SLM30Long motor insertion tool for V3 implant, coni. con., SP

20

21

CT-SLR30Long ratchet insertion tool for V3 implant, coni. con., SP

27

MT-DE001Drill extender

CT-SSR30Short ratchet insertion tool for V3 implant, coni. con., SP

23

CT-NLR30Long ratchet insertion tool for V3 implant, coni. con., NP

17

25

MT-RE160Int. connection abutment extractor, NP

CT-NSR30Short ratchet insertion tool for V3 implant, coni. con., NP

19

MT-PDM24Position drill mill Ø2.4mm

2

3

MT-PD440Position drill Ø4mm

MT-SMD10Spade marking drill

1

4

Pilot drill with built in stopper Ø2.4/2.0 height 8mmCT-P2408

MIS Implants Technologies GmbHSimeonscarre 2, 32423 Minden, GermanyTel: +49 571-972-7620 Email: service@mis-implants.de

EC REP

0483refers to drills only

MIS Implants Technologies Ltd.P.O.Box 7, Bar Lev Industrial Park, 2015600, ISRAELWebsite: www.mis-implants.com

CT-NSM30Short motor insertion tool for V3 implant, coni. con., NP

18

26

MT-RE172Int. connection abutment extractor

Long hex. drive 0.05 inch MT-RDL30

28

Short hex. drive 0.05 inch MT-RDS30

29

MT-BTI20Implant site depth probe

24

Torque wrench for implant placementMT-RT070

30

6

CT-P2411Pilot drill with built in stopper Ø2.4/2.0 height 11.5mm

CT-P2413Pilot drill with built in stopper Ø2.4/2.0 height 13mm

7

8

CT-P2416Pilot drill Ø2.4/2.0 height 16mm

9

CT-BTC24Body try in 2.40mm for tapered impl. procedure

10

CT-TDC30Step drill Ø3/2.4mm, external irrigation

11

CT-TDC35Step drill Ø3.5/3mm, external irrigation

12

CT-TDC40Step drill Ø4/3.5mm, external irrigation

13

CT-BTC30Body try in 3mm for tapered impl. procedure

14

CT-BTC35Body try in 3.50mm for tapered impl. procedure

15

CT-BTC40Body try in 4mm for tapered impl. procedure

MP-WC051 Rev.3 Aug 2015

www.mis-implants.com

MIS’ Quality System complies with international quality standards: ISO 13485:2003 - Quality Management System for Medical Devices, ISO 9001: 2008 – Quality Management

System and CE Directive for Medical Devices 93/42/EEC. MIS’ products are cleared for marketing in the USA and CE approved.

The drilling sequence is illustrated using 11.50mm implants.

Procedure recommended by MIS cannot replace the judgment and professional experience of the surgeon.

800-1000

600-800

Ø1.90 Ø3.30Ø2.40 Ø2.40

200-400

200-400

Drilling Speed (RPM)

Diameter

TorqueMax. 45N·cm

Final drill For bone type 1&2

Final drill For bone type 3&4

800-1000

600-800

450-650

Ø1.90 Ø3.90Ø2.40 Ø3 Ø3Ø2.40

200-400

200-400

TorqueMax.60N·cm

Drilling Speed (RPM)

Diameter

Final drill For bone type 1&2

Final drill For bone type 3&4

The drilling sequence is illustrated using 11.50mm implants.

Procedure recommended by MIS cannot replace the judgment and professional experience of the surgeon.

350-550

800-1000

600-800

450-650

Ø1.90 Ø4.30Ø2.40 Ø3 Ø3.50 Ø3.50Ø2.40

200-400

200-400

TorqueMax.60N·cm

Drilling Speed (RPM)

Diameter

Final drill For bone type 1&2

Final drill For bone type 3&4

350-550

800-1000

600-800

450-650

Ø1.90 Ø5Ø2.40 Ø3 Ø3.50 Ø4 Ø4Ø2.40

200-400

200-400300-

500

TorqueMax.60N·cmDrilling Speed (RPM)

Diameter

Final drill For bone type 1&2

Final drill For bone type 3&4

The drilling sequence is illustrated using 11.50mm implants.

Procedure recommended by MIS cannot replace the judgment and professional experience of the surgeon.

Ø4.30mm Implant Procedure

Ø5mm Implant ProcedureØ3.90mm Implant Procedure

Ø3.30mm Implant Procedure

The drilling sequence is illustrated using 11.50mm implants.

Procedure recommended by MIS cannot replace the judgment and professional experience of the surgeon.

MP-WC051 Rev.3 Aug 2015

www.mis-implants.com

MIS’ Quality System complies with international quality standards: ISO 13485:2003 - Quality Management System for Medical Devices, ISO 9001: 2008 – Quality Management

System and CE Directive for Medical Devices 93/42/EEC. MIS’ products are cleared for marketing in the USA and CE approved.

The drilling sequence is illustrated using 11.50mm implants.

Procedure recommended by MIS cannot replace the judgment and professional experience of the surgeon.

800-1000

600-800

Ø1.90 Ø3.30Ø2.40 Ø2.40

200-400

200-400

Drilling Speed (RPM)

Diameter

TorqueMax. 45N·cm

Final drill For bone type 1&2

Final drill For bone type 3&4

800-1000

600-800

450-650

Ø1.90 Ø3.90Ø2.40 Ø3 Ø3Ø2.40

200-400

200-400

TorqueMax.60N·cm

Drilling Speed (RPM)

Diameter

Final drill For bone type 1&2

Final drill For bone type 3&4

The drilling sequence is illustrated using 11.50mm implants.

Procedure recommended by MIS cannot replace the judgment and professional experience of the surgeon.

350-550

800-1000

600-800

450-650

Ø1.90 Ø4.30Ø2.40 Ø3 Ø3.50 Ø3.50Ø2.40

200-400

200-400

TorqueMax.60N·cm

Drilling Speed (RPM)

Diameter

Final drill For bone type 1&2

Final drill For bone type 3&4

350-550

800-1000

600-800

450-650

Ø1.90 Ø5Ø2.40 Ø3 Ø3.50 Ø4 Ø4Ø2.40

200-400

200-400300-

500

TorqueMax.60N·cmDrilling Speed (RPM)

Diameter

Final drill For bone type 1&2

Final drill For bone type 3&4

The drilling sequence is illustrated using 11.50mm implants.

Procedure recommended by MIS cannot replace the judgment and professional experience of the surgeon.

Ø4.30mm Implant Procedure

Ø5mm Implant ProcedureØ3.90mm Implant Procedure

Ø3.30mm Implant Procedure

The drilling sequence is illustrated using 11.50mm implants.

Procedure recommended by MIS cannot replace the judgment and professional experience of the surgeon.

MP-WC051 Rev.3 Aug 2015

www.mis-implants.com

MIS’ Quality System complies with international quality standards: ISO 13485:2003 - Quality Management System for Medical Devices, ISO 9001: 2008 – Quality Management

System and CE Directive for Medical Devices 93/42/EEC. MIS’ products are cleared for marketing in the USA and CE approved.

The drilling sequence is illustrated using 11.50mm implants.

Procedure recommended by MIS cannot replace the judgment and professional experience of the surgeon.

800-1000

600-800

Ø1.90 Ø3.30Ø2.40 Ø2.40

200-400

200-400

Drilling Speed (RPM)

Diameter

TorqueMax. 45N·cm

Final drill For bone type 1&2

Final drill For bone type 3&4

800-1000

600-800

450-650

Ø1.90 Ø3.90Ø2.40 Ø3 Ø3Ø2.40

200-400

200-400

TorqueMax.60N·cm

Drilling Speed (RPM)

Diameter

Final drill For bone type 1&2

Final drill For bone type 3&4

The drilling sequence is illustrated using 11.50mm implants.

Procedure recommended by MIS cannot replace the judgment and professional experience of the surgeon.

350-550

800-1000

600-800

450-650

Ø1.90 Ø4.30Ø2.40 Ø3 Ø3.50 Ø3.50Ø2.40

200-400

200-400

TorqueMax.60N·cm

Drilling Speed (RPM)

Diameter

Final drill For bone type 1&2

Final drill For bone type 3&4

350-550

800-1000

600-800

450-650

Ø1.90 Ø5Ø2.40 Ø3 Ø3.50 Ø4 Ø4Ø2.40

200-400

200-400300-

500

TorqueMax.60N·cmDrilling Speed (RPM)

Diameter

Final drill For bone type 1&2

Final drill For bone type 3&4

The drilling sequence is illustrated using 11.50mm implants.

Procedure recommended by MIS cannot replace the judgment and professional experience of the surgeon.

Ø4.30mm Implant Procedure

Ø5mm Implant ProcedureØ3.90mm Implant Procedure

Ø3.30mm Implant Procedure

The drilling sequence is illustrated using 11.50mm implants.

Procedure recommended by MIS cannot replace the judgment and professional experience of the surgeon.