W W W . S I E M O N . C O M

V-LockTM Cabinet Door Security System

V-L

oc

kTM C

ab

ine

t Do

or S

ec

urity

Siemon’s V-Lock Cabinet Security Solution is a complete hardware and software system that delivers superior cabinet-level access control for mission critical data centers and other telecommunications spaces, enabling improved security, administration and compliance with privacy regulations. Available in a centralized Bus and Node System that provides cabinet-level or end-of-row authentication, or in a decentralized Sentry System for free-standing cabinets, V-Lock offers a wide range of secure handles, including PIN/RFID card access, biometrics and dual factor authentication.

Full Administration – Software enables easy setup of user and group access for specific cabinets and time periods, as well as monitoring and logging of events.

Pre-assembled – V-Lock can be pre-assembled onto Siemon Cabinets as part of a V-Built™ customized preconfigured cabinet, along with preloaded connectivity, PDUs and accessories.

Space Saving – With highly secure cabinet-level access, colocation data centers can save space by eliminating the need to cage off cabinets.

Flexible – Wide range of handles support various levels of authentication, separate front and rear security and the ability to work with third-party access control platforms (no node, Sentry or additional software needed).

Compatible – V-Lock works with all Siemon standalone cabinets and can be retrofitted to any single-hinge door with a 25mm x 150mm opening. Not recommended for use with VersaPOD cabinets due to shared zero-U space and dual hinging doors.

Reduced Risk – Eliminates the use of universal cabinet keys that can open any cabinet while restricting access to mission critical equipment based on specific cabinets, roles and time periods.

Easy Set-Up – Minimal hardware required, handles and nodes connected and powered via the bus controller using standard twisted-pair Ethernet cable and fast enrollment of biometric and card information.

Facilitates compliance with:

• Healthcare’s HIPAA

• Financial industry’s Sarbanes-Oxley

• Payment Card Industry Data Security Standard (PCI-DSS)

• Federal Information Processing Standard (FIPS)

• European Union’s GDPR (General Data Protection Regulation)

In partnership with:

W W W . S I E M O N . C O M

V-L

oc

kTM C

ab

ine

t Do

or S

ec

urity

Handle Functionality

The Electronic Access Handle provides an added layer of security to data center cabinets.

Electronic Access Handle*

The Low Frequency Card Access Handle can be unlocked using a compatible low frequency access card.

Low Frequency Card Access Handle*

The High Frequency Card Access Handle allows for authentication via a high frequency compatible access card. Dual frequency accepts both low and high frequency compatible access cards.

High Frequency and Dual Frequency Card Access Handle*

The Biometric Access Handle allows for access via fingerprint biometrics.

Biometric Access Handle

*Compatible with a variety of third party access control management (ACM) platformsContact Siemon Technical Services for more information regarding compatibility with third party access panels.

The Biometric and High Frequency Card Access Handle allows for access via either fingerprint, high frequency card, or both for dual factor authentication.

Biometric and High Frequency Card Access* The Pin and Card Access

Handle is available in three models: pin only, pin and high frequency card access and pin and dual frequency card access. Pin and Card option offers dual factor authentication.

Pin and Card Access Handle*

The Enline unit’s various configurations allow for low frequency card access, high frequency card access or dual frequency card access, as well as the standard pin pad and biometric authentication. The Enline unit is ideal for end-of-row access control, allowing for cabinet level entry of any compatible V-Lock cabinet handle connected to the system.

Enline Unit

Certain V-Lock cabinet security handles are compatible with access cards. These vary between low frequency (125 KHz) prox cards and high frequency (13.56 MHz) cards.Some examples of compatible high frequency cards are as follows:

• iClass SE/SR/Legacy• Mifare• DESFire• iClass Seos

The firmware loaded onto the V-Lock products can be dynamically updated and compatibility can be extended. If an access card being utilized is not listed above, contact Siemon Technical Services for extended compatibility information.

Card Compatibility

Handles can be locked/unlocked via Enline units, a primary handle with built-in authentication linked to secondary handles or remotely through the V-Lock software package.

W W W . S I E M O N . C O M

Bus or Single Cabinet Topologies

V-L

oc

kTM C

ab

ine

t Do

or S

ec

urity

V-Lock Compatible

Handle

Bus ControllerSwitch

Enline Unit

Node

The Bus and Node V-Lock System supports up to 32 cabinets using a controller and cabinet nodes that are daisy-chained together. The Bus controller powers the nodes and is connected to the LAN – it is the only device in the system to have an IP address. The Bus and Node V-Lock System is ideal for environments with multiple cabinets in rows, typical of a data center. Authentication can occur at the cabinet level via individual handles or at the end of a row of cabinets via the Enline unit.

Bus and Node System

Ordering Information:V-LK-N-(XX)(XX)-111

Handle 1 Type

EL = Electronic Access

BI = Biometric Access

PR = Low Frequency Card Access

BH = Biometric and High Frequency Card Access

HI = High Frequency Card Access

LH = Dual Frequency Card Access

P0 = Pin Access

PA = Pin and High Frequency Card Access

PB = Pin and Dual Frequency Card Access

Handle 2 Type

00 = No Second Handle

EL = Electronic Access

BI = Biometric Access

PR = Low Frequency Card Access

BH = Biometric and High Frequency Card Access

HI = High Frequency Card Access

LH = Dual Frequency Card Access

P0 = Pin Access

PA = Pin and High Frequency Card Access

PB = Pin and Dual Frequency Card Access

.............................. V-Lock Cabinet Node Kit includes: • Up to two handles • Cabinet node• Up to two pairs of door contacts• Cables and cable management

Part # Description Qty

V-LK-B-CTRL-111 Bus Controller 1V-LK-P-BIHI-111 Enline 1

V-LK-N-HIEL-111 Node with 1 x High Frequency Card Handle and 1 x Electronic lock 8

V-LK-L-SC01-111 Software license pack for up to 10 units 1

V-LK-M-SI01-311 3 year software maintenance 9

Sample BOM List

Sample BOM List for Bus and Node System as shown above. Actual BOM will vary based on customer requirements.

W W W . S I E M O N . C O M

V-L

oc

kTM C

ab

ine

t Do

or S

ec

urity

PoE SwitchSentry

The Sentry V-Lock System is designed for situations where cabinets are standalone or not located in close proximately to each other. Suitable for both new cabinets and retrofits, the Sentry System uses individual decentralized devices at each cabinet, which each connecting directly to the LAN and having their own IP address. The decentralized Sentry devices can be powered via power over Ethernet (PoE) directly from a PoE-enabled network switch.

Bus or Single Cabinet TopologiesSentry System

Ordering Information:V-LK-S-(XX)(XX)-111

Handle 1 Type

EL = Electronic Access

BI = Biometric Access

PR = Low Frequency Card Access

BH = Biometric and High Frequency Card Access

HI = High Frequency Card Access

LH = Dual Frequency Card Access

P0 = Pin Access

PA = Pin and High Frequency Card Access

PB = Pin and Dual Frequency Card Access

Handle 2 Type

00 = No Second Handle

EL = Electronic Access

BI = Biometric Access

PR = Low Frequency Card Access

BH = Biometric and High Frequency Card Access

HI = High Frequency Card Access

LH = Dual Frequency Card Access

P0 = Pin Access

PA = Pin and High Frequency Card Access

PB = Pin and Dual Frequency Card Access

............................. V-Lock Cabinet Sentry Kit includes: • Up to two handles • Cabinet sentry• Up to two pairs of door contacts• Cables and cable management

V-LK-S-HIEL-111 Sentry with 1 x High Frequency Card Handle and 1 x Electronic lock 3

V-LK-L-SC01-111 Software license pack for up to 10 units 1

V-LK-M-SI01-311 3 year software maintenance 3

Sample BOM ListPart # Description Qty

Sample BOM List for Sentry System as shown above. Actual BOM will vary based on customer requirements.

W W W . S I E M O N . C O M

Administration SoftwareV

-Lo

ck

TM C

ab

ine

t Do

or S

ec

urity

Siemon’s V-Lock System is available with a server-based administration software platform to administer users, their cards and biometrics and manage user and group permissions. With features such as dual custody that requires two persons to authenticate and the ability to establish user access based on specific cabinets and time periods, V-Lock software supports the required security level for a wide range of environments. This software platform also provides real-time monitoring of all devices, including open/closed status, propped door or forced entry, and it can deliver alerts via email. The system maintains extensive logs of events and access for auditing purposes required for compliance, and it offers a partitioning feature to segment various customers for use in colocation environments where compatible. Handles can also connect to third-party access control systems.

Ordering Information

V-LK-L-SC01-(X)11 Server and client software license package for 10 devicesV-LK-L-SC02-(X)11 Server and client software license package for 20 devicesV-LK-L-SC03-(X)11 Server and client software license package for 50 devices

V-LK-L-SC04-(X)11 Server and client software license package for 100 devices

V-LK-L-SC05-(X)11 Server and client software license package for 250 devices

V-LK-L-SC06-(X)11 Server and client software license package for 500 devices

V-LK-L-CL01-111 Single client software license

V-LK-L-SE01-111 Single server software license

V-LK-M-SN10-111 1 year software and hardware maintenance package for initial 10 devices (N. Amer only)

V-LK-M-SN01-111 1 year software and hardware maintenance package for additional devices (N. Amer only)

V-LK-M-SN01-311 3 year software and hardware maintenance package, 1 per device (N. Amer only)

V-LK-M-SN01-511 5 year software and hardware maintenance package, 1 per device (N. Amer only)

V-LK-M-SI10-111 1 year software and hardware maintenance package for initial 10 devices (Rest of World only)

V-LK-M-SI01-111 1 year software and hardware maintenance package for additional devices (Rest of World only)

V-LK-M-SI01-311 3 year software and hardware maintenance package, 1 per device (Rest of World only)

V-LK-M-SI01-511 5 year software and hardware maintenance package, 1 per device (Rest of World only)

V-LK-B-CTRL-111 Bus controllerV-LK-P-BI00-111 Enline end of row access point with pin and biometric authenticationV-LK-P-BIPR-111 Enline end of row access point with pin, biometric and low frequency card authentication

V-LK-P-BIHI-111 Enline end of row access point with pin, biometric and high frequency card authentication

V-LK-D-CT00-111 Set of door contactsV-LK-S-AC00-111 Sentry power supply for use when PoE is not availableV-LK-C-PR00-111 Low frequency prox door access cardV-LK-C-IC00-111 High frequency iClass door access cardV-LK-L-CARD-111 USB card readerV-LK-L-BIOM-111 USB biometric reader

Software Part # Description

Node System Part # Description

System Accessories Part # Description

A device being any node, sentry, controller, or Enline unit(X)........1 = Bundled with USB biometric reader 2 = Bundled with USB card reader

USB biometric reader USB card reader

Because we continuously improve our products, Siemon reserves the right to change specifications and availability without prior notice.

© 2

019

Siem

on

India Middle EastP: (971) 4 3689743

ChinaP: (86) 215385 0303

EuropeP: (44) 0 1932 571771

Latin America P: (571) 657 1950/51/52

Asia PacificP: (61) 2 8977 7500

Siemon Interconnect SolutionsP: (1) 860 945 4213www.siemon.com/SIS

North AmericaP: (1) 860 945 4200

W W W . S I E M O N . C O M

© 2

019

Siem

on

_SS

_V-L

ock_

Rev

C 9

/19

V-L

oc

kTM C

ab

ine

t Do

or S

ec

urity