V-LINE High-Cycle Ultra-Compact Vertical Rotary Injection ...
Transcript of V-LINE High-Cycle Ultra-Compact Vertical Rotary Injection ...
Recycle Friendly Maintenancefree
Reducewaste ● V-LINE is a registered trademark of Sodick Co., Ltd. in Japan.
Create your future
HC03VREV-LINE® High-Cycle Ultra-Compact Vertical Rotary
Injection Molding Machine
Electromotive direct pressureclamping systemStable molding by V-LINE® Ultra-high cycle molding
Flexibly responds to various types of small precision parts and quick delivery
Ultra-high cycle, ultra-compact, ultra-stable injection molding machine
The adoption of the four tie bars ensures excellent straightness and high rigidity, where the mold clamping force is distributed uniformly. The load reduced by applying an optimal contact pressure to the mold by stable mold closing and mold clamping, reduces maintenance and improves the life of the mold.
The clamping system which performs mold closing and mold clamping in one motion, and a belt driven rotary table, realized 0.9 seconds per cycle. (0.3 seconds each for mold closing, mold clamping, table rotation, and mold opening)* With two-sided lower mold of 36 kg, and mold opening/closing stroke of 80 mm * Equivalent to dry operation
The V-LINE is the plasticization and injection unit which enables stable measurement and injection, realized by eliminating the destabilizing factors during the plasticization measurement and injec-tion, by separating the plasticization and injec-tion. Accordingly, the molding of small precision parts which require advanced technology, can be performed stably even at a high-cycle.
■Machine Dimensions & Installation Drawing
Movable Platen
φ60H7
Max. Mold Open Stroke
M5 Tap Depth 10
φ104
φ58
30
30
150
150
200
150
200
250
75 100
75 4-M10 Tap Depth 15
100
Resin Feed, Bolt Hole for Hopper
(Mold Dimension)
300
200
(Mold Dimension)
150
200
250
Min. Mold Thickness 150(Mold Dimension)
Ejector Stroke
Table Dimensionφ460
50
100
2×4-M6 Tap Depth 12
2×24-M10 Tap Depth 20
130
4-M6 Tap Depth 12
130
100
50
Movable Platen150
24-M10 Tap Depth 20(Mold Dimension)
2-φ18
Main Spec.of Nozzle
Outside Diameterof Coverφ30.4φ23.2φ30.4φ23.2φ30.4φ23.2φ30.4φ23.2
Diameter ofNozzle Gate
φ1.5
φ2.0
φ2.5
φ3.0
Extension
3060306030603060
Spher R
10
10
10
10
Mounting Layout Drawing
1100
Water Return Port1/2B FL+125 Air Supply Socket
1/4B FL+117.5Water Inlet Port1/2B FL+125
740650602.5
1625
Hopper Bracket
100
Attaching Placefor Hopper
A-A
Power Supply Socket
300 1200 125
Mold Mounting Face
Daylight
Max. Height
Unit Stroke
(580)
(698)
255
996301
300
2600
900
2030
205 400
300
378
8001178
400
425
425
425
425
2-Adjuster Pad 375 475 250 4-Mount
Table Center
3-Color Signal Light (Option)
■Mold Installation Dimensions Drawing
HC03VREV-LINE® High-Cycle Ultra-Compact Vertical Rotary Injection Molding Machine
Clamping Unit
Max. clamping force kN 29.4
Max. mold size mm 180 × 150
Turntable dimensions mm Ø460
Open daylight mm 300
Min. mold thickness mm 150
Ejector stroke mm 30
Plasticization & injection unit
Screw diameter mm 14
Plunger diameter mm 8 12
Max. injection pressure MPa 197
Theoretical injection volume cm3 2 4.5
Max. injection speed mm/s 500 400
Plasticization capacity kg/h 5
Machine dimensions / Weight
Machine dimensions
(L x W x H)mm 1625 × 1178 × 2600
Machine weight kg 1900
Power supply unit
Power supply input specification AC200V 50/60Hz
NC unit Independently developed CNC
Total electric capacity kVA 29
■ Spec.
Unit: mm
Unit: mm
Printed in Japan
3-12-1, Nakamachidai, Tsuzuki-ku, Yokohama, Kanagawa224-8522 JapanTEL: 81-45-942-3111 FAX: 81-45-943-7880
●�The export of Sodick's products and its related technologies (including software applications) is regulated under Japan's Foreign Exchange and Foreign Trade Control Law. In addition, because some of these products may be subject to re-export controls under the Export Administration Regulations (EAR) of the United States; please contact Sodick before offering or exporting these products overseas.
●This catalogue contains a photographic image that has been generated from 3DCG.●��Due to ongoing research, specifications are subject to change without prior notice.●The contents of this catalog is current as of September, 2015.
http://www.sodick.jp
R1013900.2015.10<00>