Helen Jane Walters v. Lewis Mark Walters : Brief of Respondent
V and a Presentation Walters
-
Upload
antonio-silva -
Category
Documents
-
view
222 -
download
0
Transcript of V and a Presentation Walters
-
7/23/2019 V and a Presentation Walters
1/33
Peter Walters
Research Councils UK Fellow Rapid Prototyping
Ceramic 3D Printing: A Design Case Study
-
7/23/2019 V and a Presentation Walters
2/33
Personal background:
Industrial design and rapid prototyping: visual and functional prototypes.
-
7/23/2019 V and a Presentation Walters
3/33
UWE CFPR Research Fellow: Rapid Prototyping
Applications for new 3D technologies in the visual arts
SoundPrint 1 (2008)
Katie Davies and Peter Walters
-
7/23/2019 V and a Presentation Walters
4/33
Richard Hamilton, designs for Hutton Award
Medals Of Dishonour exhibition at the British Museum, 2009
British Art Medal Trust
-
7/23/2019 V and a Presentation Walters
5/33
UWE CFPR Research Fellow: Rapid Prototyping
Applications for new 3D technologies in the visual arts
Trumpet Tiles and Trumpet Spheres (2009)
Peter Walters. Form and Colour Studies Z-Corp 3D Prints
-
7/23/2019 V and a Presentation Walters
6/33
Confession
-
7/23/2019 V and a Presentation Walters
7/33
Confession
No prior experience in ceramics
-
7/23/2019 V and a Presentation Walters
8/33
Double-walled cup with pierced outer wall.
Internal ribs. Handle passes through outer wall.
-
7/23/2019 V and a Presentation Walters
9/33
Double-walled beaker with pierced outer wall
-
7/23/2019 V and a Presentation Walters
10/33
3D printed concept models in standard Z-corp material
-
7/23/2019 V and a Presentation Walters
11/33
First attempt at firing beaker
-
7/23/2019 V and a Presentation Walters
12/33
Add internal support for firing
-
7/23/2019 V and a Presentation Walters
13/33
Better but still significant distortion.
Support also slumps in firing.
-
7/23/2019 V and a Presentation Walters
14/33
Add larger internal ribs around holes.
Better but slight distortion still present.
-
7/23/2019 V and a Presentation Walters
15/33
Stretch holes to compensate for distortion.
-
7/23/2019 V and a Presentation Walters
16/33
Stretch holes to compensate for distortion.
Unfired test piece.
-
7/23/2019 V and a Presentation Walters
17/33
Test pieces following firing in kiln.
-
7/23/2019 V and a Presentation Walters
18/33
Successful test piece.
Biscuit fired.
-
7/23/2019 V and a Presentation Walters
19/33
Successful test piece.
White opaque glaze.
-
7/23/2019 V and a Presentation Walters
20/33
Image credit: MarcusObal 2008. Wikimedia Commons
Basilica di Santa Maria del Fiore, Florence.
Coffee cup in the Italian Style.
-
7/23/2019 V and a Presentation Walters
21/33
Image credit Cigoli (1559-1613) Brunelleschis Dome, elcontexto.net
Brunelleschis Dome.
Dealing with similar problem support during construction?
See Ross King Brunelleschis Dome Chatto and Windus/Random House (2000)
-
7/23/2019 V and a Presentation Walters
22/33
-
7/23/2019 V and a Presentation Walters
23/33
3D printed concept models in standard Z-corp material
-
7/23/2019 V and a Presentation Walters
24/33
Saucer gives perimeter support during firing.
Plus internal support block.
-
7/23/2019 V and a Presentation Walters
25/33
Early prototype test firing.Circular handle hole is distorted.
-
7/23/2019 V and a Presentation Walters
26/33
Stretch design to compensate for distortion in firing.
-
7/23/2019 V and a Presentation Walters
27/33
Successful test piece.
Biscuit fired.
-
7/23/2019 V and a Presentation Walters
28/33
Successful test piece.
Opaque white glazed.
-
7/23/2019 V and a Presentation Walters
29/33
Conclusions
-
7/23/2019 V and a Presentation Walters
30/33
Conclusions
3D printing ceramics
Just press print?
-
7/23/2019 V and a Presentation Walters
31/33
Conclusions
3D printing ceramics
Just press print?
Requires iterative approach were still learning
-
7/23/2019 V and a Presentation Walters
32/33
Conclusions
3D printing ceramics
Just press print?
Requires iterative approach were still learning
and a hands-on understanding of materials
-
7/23/2019 V and a Presentation Walters
33/33
Thank you!