UWEC – Underwater Eddy Current Tester - Sensima Inspsensimainsp.com/product sheet...
Transcript of UWEC – Underwater Eddy Current Tester - Sensima Inspsensimainsp.com/product sheet...
Product sheet for UPEC-SF3KU4 version 2015-02-17-001
(product sheet UPEC- SF3KU4 2013-12-03-001.pdf )
page 1 of 4
UWEC – Underwater
Sensima Inspection’s UWEC TESTER
2CJM3GI) is the perfect tool for reliable
inspection, both underwater and on surface.
equipment complies with eddy current inspection
standards, in particular weld inspection
the BS 1711:2000 and the ISO 15548_1.
The differentiating features of the UWEC tester
1. Reliable signals: the eddy current signals are
and processed next to the probe, i.e. robust, digital signals
can be transmitted to the surface using w
such as those used for digital serial ROV communication.
This setup ensures that the eddy current signals are
reproducible and are not disturbed by spur
caused by cable configuration, interferences, or cable
deterioration.
2. No compromise on wear: our proprietary design for
weld probe includes a full metal protection of the
contact points.
3. Versatile system: The system can be
inspection and ROV integration, both onshore and
underwater. The integration can be performed by the
customer. Sensima provides support on demand.
A stainless steel casing and UW connectors
robustness required for UW applications.
have demonstrated outstanding durability
of many NDT projects conducted underwater, on offshore
oil and gas platforms and windmill
components for hydro power infrastructures
valves and protecting grids.
Being the most compact EC tester in
much valued by divers for its minimal impact on
underwater maneuverability.
The UWEC inspection setup is best utilized
full duplex audio connection and simultaneous display of
the impedance plane on an UW monitor. This enables
both the diver - carrying the tester and manipulating the
probe - and the inspector located on the surface
control PC to view the same information. In particular, the
diver can directly monitor the probe response as displayed
by the Sensima "UPECView" software.
Product Sheet
Sensima inspection, Mont
Underwater Eddy Current
UWEC TESTER (UW0100-ECT-
reliable eddy current
both underwater and on surface. The
eddy current inspection
, in particular weld inspections as required by
he UWEC tester are
: the eddy current signals are digitalized
next to the probe, i.e. robust, digital signals
well-proven cables
ROV communication.
e eddy current signals are
not disturbed by spurious effects
caused by cable configuration, interferences, or cable
our proprietary design for
probe includes a full metal protection of the probe
: The system can be used for manual
inspection and ROV integration, both onshore and
The integration can be performed by the
support on demand.
connectors ensure the
applications. UWEC’s testers
have demonstrated outstanding durability at the occasion
conducted underwater, on offshore
windmills, and on UW
for hydro power infrastructures such as
EC tester in its category, it is
valued by divers for its minimal impact on
is best utilized together with a
full duplex audio connection and simultaneous display of
edance plane on an UW monitor. This enables
carrying the tester and manipulating the
and the inspector located on the surface with the
to view the same information. In particular, the
diver can directly monitor the probe response as displayed
The most compact underwater
Comfortable for the diver and easy to mount on a ROV.
Uncompromising robustness
Stainless steel enclosure with a maximum operating depth of 1000m
or 3200 ft.
Product reference :
UW0100-ECT
www.sensimainsp.com
Sensima inspection, Mont-Blanc 31, 1196 Gland, Switzerland
urrent Tester
The most compact underwater EC tester:
Comfortable for the diver and easy to mount on a ROV.
Uncompromising robustness
Stainless steel enclosure with a maximum operating depth of 1000m
or 3200 ft.
Product sheet for UPEC-SF3KU4 version 2015-02-17-001
(product sheet UPEC- SF3KU4 2013-12-03-001.pdf )
page 2 of 4
Intuitive and practical acquisition software is provided
with the tester. All the common features
testers interface are provided in a easy to use panel
configuration optimized for tactile devices. Testing
settings can be saved and retrieved easily and reporting
can be done instantaneously.
Features Highlights
• Plug-and-play: connect to USB/RS422
measuring
• Both direct impedance and reflection measurements
• Multifrequency (time multiplexed)
• Compatible with most of your legacy eddy current
probes (may required an adaptor)
• Field proven robustness
• Enables the inspection of UW welds according
1711:2000
• Working distance up to 1'000 m
Customization
• System can be customized with
connectors/cables
• ROV integration
• UW monitor
UPECView Acquisition Software
The software provides touch access to all the instrument
and filter settings, but it can be used on a normal PC as
well (Windows 8 or later). You benefit from all the modern
features of windows, such as remote access for
troubleshooting and speech recognition.
No dongle: The UPECView software can be installed on any
PC in your company to perform remote
and assessment.
Presets:Store all instrument and filter settings
inspection tasks and recall themsimply by tapping on a
windows tile.
Reporting: Generate a Microsoft Word and/or HTML
report next to your saved datab. The report contains all the
data processing settings.
Ordering information
Product number: UW0100-ECT-2CJM3GI
Product Sheet
Sensima inspection, Mont
Intuitive and practical acquisition software is provided
features in conventional
testers interface are provided in a easy to use panel
configuration optimized for tactile devices. Testing
settings can be saved and retrieved easily and reporting
/RS422 and start
Both direct impedance and reflection measurements
ompatible with most of your legacy eddy current
Enables the inspection of UW welds according to BS
with your favorite
Acquisition Software
provides touch access to all the instrument
, but it can be used on a normal PC as
You benefit from all the modern
such as remote access for
software can be installed on any
PC in your company to perform remote data processing
settings for all your
ly by tapping on a
Microsoft Word and/or HTML
. The report contains all the
GI
All functions at your fingertips:
All advanced functions are available in
displayed or hidden.
Advanced filter
Completely configurable signal processing chain
angleand gains (horizontal and vertical
individually.
Report generation:
A word and/or html report is generated
Product reference :
UW0100-ECT
www.sensimainsp.com
Sensima inspection, Mont-Blanc 31, 1196 Gland, Switzerland
l functions at your fingertips:
available in one click or tap. Traces can be
hidden.
filter settings:
Completely configurable signal processing chain and alarms. Phase
and vertical) can be altered on each channel
individually.
Report generation:
is generated each time the data is saved.
Product sheet for UPEC-SF3KU4 version 2015-02-17-001
(product sheet UPEC- SF3KU4 2013-12-03-001.pdf )
page 3 of 4
Type of instrument General purpose eddy current instrument
Power supply 5 V USB powered, 100 mA typ.
Safety CE, FCC
Technology Signal proc.:
Settings:
Outputs:
Single frequency, multifrequency (time multiplexed)
Physical presentation Weight:
Size:
Connectors:
Environmental effects Warm-up time
Ingress protection:
Operating temp.:
EMC compatibility:
Generator unit Single frequency, multifrequency (time multiplexed)
Frequency range:
Current mode:
Voltage mode:
Input Stage Input impedance:
Max. input voltage:
Balance Hardware bala
Software balancing after A/D conversion
HF amplification Gain setting range:
Bandwidth:
Linear input range:
Demodulation Bandwidth:
Wave shape:
Vector amplification Gain setting range:
LF filtering Digital filters
Phase setting Range:
Step size:
Digitized outputs Data protocol:
Digitization Digitization technique:
Sampling rate:
A/D resolution:
Stage:
Product Sheet
Sensima inspection, Mont
General purpose eddy current instrument
5 V USB powered, 100 mA typ. current draw
Part 15B,RoHS,
Signal proc.: Analogue preamplification and demodulation
Digital outputs and filtering
Settings: Manual, remote controlled, stored, preset
Outputs: Digital components outputs, optional TTL
Single frequency, multifrequency (time multiplexed)
Weight: 90g (3.2 oz.)
45 x 60 x 18 mm3 (1.8 x 2.4 x 0.7 in
Connectors: USB mini A socket, Fischer 102 4
up time: 0s for typical use
200s for full precision
Ingress protection: IEC 60529 CODE IP67
Operating temp.: -40 °C to 60 °C
EMC compatibility: Compliant with CE, FCC Part 15B
Single frequency, multifrequency (time multiplexed)
Frequency range: 20 kHz to 10 MHz
1 Hz to 10 MHz with reduced data rate
Current mode: 1-10 mA, up to 9 V p-p
> 10000 Ω source impedance
Voltage mode: 9 V p-p, 90 mA maximum
50 Ω impedance
Input impedance: 100 kΩ
Max. input voltage: 5V
Hardware balancing before the vector amplifier
Software balancing after A/D conversion
Gain setting range: 2 - 20, 2.9 dB steps
Bandwidth: 10 MHz
Linear input range: 1.0 V
Bandwidth: 10 MHz
Wave shape: square
Gain setting range: 1 – 100, 2.7 dB steps
Digital filters
0 – 360°
Step size: 0.05°
Data protocol: USB 2.0 full speed and/or long range Bluetooth
Digitization technique: Sigma-delta
Sampling rate: 375 Hz to3 kHz
A/D resolution: 14 to 16 bits
After vector amplification and balancing
Product reference :
UW0100-ECT
www.sensimainsp.com
Sensima inspection, Mont-Blanc 31, 1196 Gland, Switzerland
Analogue preamplification and demodulation
Manual, remote controlled, stored, preset
Digital components outputs, optional TTL alarms
(1.8 x 2.4 x 0.7 in3)
4-pin
15B
1 Hz to 10 MHz with reduced data rate
USB 2.0 full speed and/or long range Bluetooth
After vector amplification and balancing
Product sheet for UPEC-SF3KU4 version 2015-02-17-001
(product sheet UPEC- SF3KU4 2013-12-03-001.pdf )
page 4 of 4
UW Absolute EC Probe
UWEC Tester
Product Sheet
Sensima inspection, Mont
Diver's
Product reference :
UW0100-ECT
www.sensimainsp.com
Sensima inspection, Mont-Blanc 31, 1196 Gland, Switzerland
iver's monitor