UV Adhesives: Curing Adhesives for Industrial Uses
-
Upload
parson-adhesives-inc -
Category
Business
-
view
287 -
download
1
description
Transcript of UV Adhesives: Curing Adhesives for Industrial Uses
UV Adhesives: Curing Adhesives for Industrial Uses
The technology has been advanced as compared to what it was earlier, but it is still active where
improvements have been made. UV adhesive is a type of adhesive that is widely used in the
medical device assembly as well electronics. The conventional UV curable adhesives which is
also called as UV Cure acrylates was renowned in the medical device assembly during 1990s
that attracted plenty of manufacturers who were seeking for eco-friendly solution. The rising
demands in the electronic industry during 1990s have increased the demands for highly strong
adhesives that could bond the materials. Or in other words, you can say super glue would be a
best option to bond the industrial products.
Here, the solution is just the UV curable adhesives which stick things very accurately and
quickly. There are many other industrial products that last long for environmental benefits, but
the high speed production as well as flexibility of design that these UV adhesive offers cannot be
overlooked. It is a curable adhesive that blocks the UV rays while preventing the plastics from
changing color or yellowish over the years. This UV agent will block the light to pass through
the plastic and is also invisible in nature, giving crystal clear look.
There are different kinds of adhesives available in the market with both visible light and UV
protected, which are widely accepted for industrial usage. They are called as light or photo
curable adhesives. UV adhesives that are found in the market are used to cure mechanism. Take
an example that epoxy can be turned as a heat cure epoxy basically merges epoxy or UV cure
epoxy. Most of the silicones represent moisture cures, but there are a number of UV curable
silicones available that are almost alike to the UV curable cyanoacrylates. Though there are
many types of adhesives, but many possess more than one cure mechanism such as UV and
anaerobic sealant, UV and heat cure, UV and moisture cure, and several others.
UV adhesives are linked with high speed automated productions, but glass and crystal artists use
just UV adhesive. As far as cost is concerned, UV curable adhesives come in competitive range
with other forms of adhesives in the market. The equipment costs are proportionate with the
project sale. If you are using sunshine, the cost goes down or if you go for industrial lamps, the
expenses will mount very high.
As a number of adhesives are cured with UV, it becomes significant to look after the health and
safety of the workers. UV adhesive gives a strong and permanent bonding option without any use
of heat. The reason behind not deploying heat is that they use UV light or other radiation
sources. The bonding through these UV adhesives is instantly done, whereas; others take longer
time. This is the reason why it comes in the category of super glue.
For More Details Contact:
Parson Adhesives, Inc. Sales Office: 3345 Auburn Road, Suite 107, Rochester, MI 48309 USA Phone: 248-299-5585 Fax: 248-299-3846 Email: [email protected] Toll free: 1-877-805-0185 Website: http://www.parsonadhesives.com/