UTP Transmission Single Channel Active Video Transmitter Model Number: SVU-AT Product Description:...
-
Upload
geoffrey-tappe -
Category
Documents
-
view
220 -
download
1
Transcript of UTP Transmission Single Channel Active Video Transmitter Model Number: SVU-AT Product Description:...
UTP Transmission
Single Channel Active Video TransmitterModel Number: SVU-AT
Product Description:SVU-AT is the Veilux series of active video balun which can provide extended distance between CCTV camera and DVR or multiplexer via UTP cable. SVU-AT is single channel active transmitter works with SVU-AR as receiver in pairs.
• Transmission distance of color signal via CAT5 or CAT6
• Up to 1500m (4900 ft) with active receiver
• DC12V/AC24V power supply, power supply reversed polar protection
• Built-in transient protection• Dip switch with 2-level adjustment of
brightness and sharpness• Excellent noise and crosstalk rejection
function
Product Feature
Product Terminal and Dimension Introduction
① VIDEO IN ② Signal Indicator③ Power Indicator ④ VIDEO + ( UTP CABLE ) ⑤ VIDEO - ( UTP CABLE ) ⑥ GND⑦ AC/DC IN + ⑧ AC/DC IN - ⑨ Gain Dip Switch
Product Code Settings
Product Installation Instructions
• Connect POWER+/- terminal to power, then power indicator becomes light.
• Connect coming transmission video indicator to BNC terminal of transmitter, then green video indicator becomes light
• Select one pair of UTP cable and respectively connect to VIDEO +/- of transmitter
• Adjust dip switch for distance. • Connect GND terminal to the ground
Product Connection Diagram
Single Channel Active Video ReceiverModel Number: SVU-AR
Product Description: SVU-AR is the Veilux series of active video balun which can provide extended distance between CCTV camera and DVR or multiplexer via UTP cable. SVU-AR is single channel active receiver works with SVU-AT as transmitter in pairs.
• Transmission distance of color signal via CAT5 or CAT6
• Up to 1500m (5000ft) with active transmitter
• DC12V/AC24V power supply, power supply reversed polar protection
• 6-level adjustment of brightness and sharpness compensation
• Dip switch and potentiometer double control.
• Excellent noise and crosstalk rejection function
• Built-in transient protection
Product Feature
Single Channel Active Video ReceiverModel Number: SVU-AR
Product Terminal and Dimension Introduction①---- VIDEO OUT ②----Signal Indicator ③---- Power Indicator ④----VIDEO + ( UTP CABLE ) ⑤----VIDEO - ( UTP CABLE ) ⑥---- GND ⑦--- AC/DC IN + ⑧---- AC/DC IN - ⑨--- Potentiometer ⑩----Gain Dip Switch
Product Code Settings
Product Installation Instructions
• Connect POWER+/- terminal to power, then power indicator becomes light.
• Select one pair of UTP cable and respectively connect to VIDEO +/- of transmitter
• Connect BNC terminal to signal processing equipment (such as monitor etc.)
• Adjust gain in line with distance dip switch diagram above.
• Connect GND terminal to the ground
Product Connection Diagram
8- Channel Active Video HubModel Number: SVU–AR8
Product Description:
SVU-AR8 is suitable for centralized mounting of multi-channel receivers, thereby helping to reduce on-site service cost.
• Transmission distance of color signal via CAT5 or CAT6 • Up to 800m (2667ft) with passive transmitter• Up to 1500m (5000ft) with active transmitter• 6 level independent gain, sharpness, brightness control• Suitable for direct installation in surveillance cabinets• Excellent anti-interference ability• Built-in transient protection
Product Feature
8- Channel Active Video HubModel Number: SVU–AR8
Product Terminal and Dimension Introduction⑴---- POWER INPUT ⑵---- VIDEO + ⑶---- VIDEO - ⑷---- GND ⑸---- VIDEO OUTPUT ⑹---- GAIN DIP SWITCH (transmission distance dip switch)⑺---- POWER SWITCH ⑻---- POWER INDICATOR ⑼---- POTENTIOMETER (brightness adjustment) ⑽----SIGNAL INDICATOR
Product Code Settings
Product Installation Instructions
• Power supply, blue power indicator light.• Connect coming transmission video indicator to
BNC terminal of transmitter, then green video indicator becomes light.
• Connect BNC terminal to signal processing equipment (such as monitor etc.)
• Adjust gain in line with distance dip switch diagram above.
• Connect GND terminal to the ground
Product Connection Diagram
16- Channel Active Video HubModel Number: SVU–AR16
Product Description: • SVU-AR16 is a 16 channel active video hub used for centered video transmission, which can save project cost and be very convenient in construction.
• Transmission distance of color signal via CAT5 or CAT6 • Up to 800m (2667ft) with passive transmitter, Up to 1500m
(5000ft) • with active transmitter• 6 level independent gain, sharpness, brightness control• 1U rack mounting panel, suitable for direct cabinet installation • Excellent anti-interference ability • Built-in transient protection
Product Feature
16- Channel Active Video HubModel Number: SVU–AR16
Product Terminal and Dimension Introduction⑴---- POWER INPUT ⑵---- VIDEO + ⑶---- VIDEO - ⑷---- GND ⑸---- VIDEO OUTPUT ⑹---- GAIN DIP SWITCH (transmission distance dip switch)⑺---- POWER SWITCH ⑻---- POWER INDICATOR ⑼---- POTENTIOMETER (brightness adjustment) ⑽----SIGNAL INDICATOR
RJ45 Pins ,Product Code Settings
Product Installation Instructions• Power supply, blue power indicator light.• Connect coming transmission video indicator
to BNC terminal of transmitter, then green video indicator becomes light.
• Connect BNC terminal to signal processing equipment (such as monitor etc.)
• Adjust gain in line with distance dip switch diagram above.
• Connect GND terminal to the ground
Product Connection Diagram
Single Channel Passive TransceiverModel Number: SVU-PT/R
Product Description• SVU-PT/R is designed to provide superior immunity from noise and interference, such as RFI and EMI. SVU-PT is used as video transmitter while SVU-PR as receiver. We suggest you use them in pairs.
• Transmission distance of color signal via CAT5 or CAT6
• Up to 300m (1000 ft) with passive balun (from camera to monitor) Up to 800m (2667ft) with formal active receiver
• No need to provide power • Excellent anti-interference ability • Built-in transient protection • Open on spot and easy connection
for installation
Product Feature
Single Channel Passive TransceiverModel Number: SVU-PT/R
Product Terminal and Dimension Introduction
①---- Video Input and Output
②---- Video In V + ( UTP CABLE )
③---- Video In V - ( UTP CABLE )
④---- GND
Product Installation Instructions
• Selected a pair of UTP Cable (must be same color) connect to the transmitter VIDEO +/- port and receiver VIDEO +/- port.
• Connect the video signal of receiver to display device.
• GND terminal connect to the ground (part product without this interface
Product Connection Diagram
8 Ch Passive Video HubModel Number: SVU-PR8
Product DescriptionSVU-PR8 is an 8 port video receiver hubs with surge suppression. It is suitable for centralized mounting of big project. And it is very convenient in project installation.
• Transmission distance of color signal via CAT5 or CAT6 • Up to 300m (1000 ft) with passive transmitter • No need to provide power• Built-in transient protection• Excellent anti-interference ability and stable performances
Product Feature
8 Ch Passive Video HubModel Number: SVU-PR8
Product Terminal and Dimension Introduction
① VIDEO OUT② VIDEO IN V+ (UTP Cable)③ VIDEO IN V – (UTP Cable) ④ GND
Product Installation Instructions
• Connect coming transmission video indicator to BNC terminal of transmitter
• Select one pair of UTP cable (It must be the same color) and respectively connect to VIDEO +/- of transmitter
• Connecting the receiver hub video signal to the BNC terminal of display devices
• Connect GND terminal to the ground
Product Connection Diagram
16 Ch Passive Video HubModel Number: SVU-PR16
Product Description
SVU-PR16 is a 16 port video receiver hubs with surge suppression. It is suitable for centralized mounting of big project. And it is very convenient in project installation.
• Transmission distance of color signal via CAT5 or CAT6 • Up to 300m (1000 ft) with passive transmitter • No need to provide power• Built-in transient protection• Excellent anti-interference ability and stable performances
Product Feature
16 Ch Passive Video HubModel Number: SVU-PR16
Product Terminal and Dimension Introduction
①---- VIDEO OUT②---- VIDEO IN V+ (UTP Cable)③---- VIDEO IN V – (UTP Cable) ④---- GND
Product Installation Instructions
• Connect coming transmission video indicator to BNC terminal of transmitter
• Select one pair of UTP cable and respectively connect to VIDEO +/- of transmitter
• Connecting the receiver hub video signal to the BNC terminal of display devices
• Connect GND terminal to the ground
Product Connection Diagram