UT3-B15 Series se rI ntf acS ol u iP d m No - jae. · PDF fileUTouch Panel Monitor UT3-B15...
Transcript of UT3-B15 Series se rI ntf acS ol u iP d m No - jae. · PDF fileUTouch Panel Monitor UT3-B15...
No.-0093eIssued:
April, 2010
1
U S E R I N T E R F A C E S O L U T I O N S P R O D U C T I N F O R M A T I O N
15-inch XGA Dual Video InterfaceTouch Panel Monitor UT3-B15 Series
The UT3-B15 Series are touch panel monitors with a 15-inch XGA (1024 x 768 pixels) TFT color LCD module as the same as the UT3-15 Series. Renewed design has improved functionality and perform-ance, and has realized a variety of forms. The UT3-B15 Series are functionally compatible with the UT3-15 Ser-ies, and they are equipped with two video ports - an analog RGB and a digital visual interface (DVI-D). They supports two different touch panel interfaces, the RS-232C and the USB.The UT3-B15 Series are optimal touch panel monitors for a wide vari-ety of applications.
FeaturesUse the industry's first(*1) LED backlit LCD as for industrial use. 1. Power consumption by half compared to our current product.2. Long life, and lifetime value; 50,000 hours (LED 100% of rated
light, ambient temperature of 25 deg. C, the ability estimates)3. Fine brightness adjustment (adjustment range: 1 to 100%) can fur-
ther extend operating life and saving the power consumption.4. Without use of mercury and environmentally friendly.The RAS functions(*2) can improve equipment utilization.1. With touch panel fault information, alarm output is capable(*3).Easy set up with the original software.1. Can update the firmware from the host PC.2. Power save settings.3. Touch panel driver can control two screens including in combina-
tion with a different type touch panel. 4. The touch panel driver supports Windows (R) 7 (32bit version),
Windows Vista (R) (32bit version), and Windows (R) XP.(*4) Support of Standards: RoHS, CE, VCCI-B, CCC (pending)
*1 Our check as of March 2010.*2 RAS is a concept for increasing reliability with considering (1)Reliability, (2)Availability, (3)Serviceability.*3 Only for optical touch panel used type.*4 Windows (R), Windows Vista (R) are registered trademarks of Microsoft Corporation in the United States and other countries.
Made-to-order Product
Screen SizeNo. Size15 15 in.
PowerNo. Volt. 3 12 to 24 VDC X AC Power Adapter
ResolutionMark Resol.X XGA
JAE is of ISO 9000 (Quality management and quality assurance standards) and ISO 14001 (Environmental management systems) certified.
Product Number
Bezel TypeBezel and Rear Case Type
Optical Touch Panel and Open Frame Type
Bezel, Rear Case and Stand TypeStand Monitor Type
Open Frame Type
UT3-B 15 NN X 3 R D N -*
Touch Panel InterfaceMark TypeD RS-232C/USB Dual (Selective)N None
ProtectionMark ClassN IP42A IP65*
Form, ColorMark Form, ColorNNOpen FrameFWBezelRWBezel and Rear CaseSWBezel, Rear Case and Stand
Series Version Mark
Touch PanelMark TypeR Resistive I InfraredN None
* IP65 is applicable for Optical Touch Panel Type only.
Touch Panel Monitor UT3-B15 Series User Interface Solutions Product Information No.0093e
2
PowerOperating TemperatureStorage Temperature
Operating Ambient HumidityCooling
Display SizeActive Area
Number of PixelsPixel Pitch
Number of ColorsBrightness
Viewing AngleBacklight
Video Signal ModeVideo Signal
Synchronizing SignalDisplay ModeVideo Interface
Touch Panel InterfacePower Supply Connector
+12 to +24 VDC +/- 5% 16 W max. 0 to +50 deg. C -20 to +60 deg. C 85% RH max. (No condensation) Air cooling 38 cm diagonal (15-inch) TFT-LCD (Color) 304.1 mm (H) X 228.1 mm (V) 1024 X 768 pixels 0.297 mm X 0.297 mm 16.77 million colors(*1)
350 cd/m2 (Value as LCD Module) Right / Left: 80 deg., Up / Down: 80 deg., (Contrast ratio 10:1 min., Value as LCD Module) White LED Analog RGB / DVI-D Analog 0.7 Vp-p (Input impedance 75 ohms) / DVI Standard compliant TTL (Analog RGB) 1024 X 768, 800 X 600, 640 X 480, 720 X 400 (VGA Text) Analog RGB (Mini D-sub 15-pin) / DVI (DVI-I 29-pin) RS-232C (D-sub 9-pin) / USB2.0 (Full Speed 12 Mbps, B connector) 1-178295-2 (Pin type) / LGP6531-0800F (DC Power Jack / for 12 VDC)
Type
Product NumberOutline Dimensions
WeightProtection Class
Audio InputSpeaker
Touch Panel TypeTouch Panel Resolution
Touch Panel OutputTouch Panel Operating Force
UT3-B15NNX3RDN-A UT3-B15FWX3RDN-A UT3-B15RWX3RDN-A UT3-B15SWXXRDN-A UT3-B15SWXXNNN-A UT3-B15NNXXIDA-A341.6 X 257.2 X 43.3 mm357 X 299.5 X 47.5 mm357 X 299.5 X 50.5 mm 357 X 358 X 200 mm 356 X 273 X 53.2 mm 2.6kg max. 2.9kg max. 3.2kg max. 6.0kg max. 2.9kg max. IP42(*2) IP65(*2)
3.5 mm in dia. Stereo Mini Jack 1 W + 1 W (Stereo) Resistive Infrared 1024 X 1024 / 1024 X 768 52 X 39(*3)
Switch address output (ASCII code) Switch address output (ASCII code) 1.47 N (150 gf) min.
Common Specifications
Individual Specifications
*1 The actual display colors depend on the display capacity of the computer connected.*2 Between bezel and panel, in the front only.*3 Number of optical elements. Double, quad-precision.
- +
Bezel, Rear Case and Stand
Stand Monitor(No Touch Panel)Bezel and Rear CaseBezelOpen Frame Optical Touch Panel
and Open Frame
Touch Panel Monitor UT3-B15 Series User Interface Solutions Product Information No.0093e
3
Dimensions of Panel Opening (Reference)
USB InterfaceDVI InterfaceRS-232C InterfaceAnalog RGB InterfacePower Supply (12 VDC Type)DC Power Jack (for 12VDC)
123456
USB InterfaceDVI InterfaceAudio InputRS-232C InterfaceAnalog RGB InterfacePower SupplyDC Power Jack (for 12VDC)
1234567
Outline Dimensions (Unit: mm) - Open Frame Type -
- Bezel Type -
357
299.
5
47.5
2 3 4 5 61
Bottom
41.5
15
27.5 37.5 22.140.931.4
Front
Center of display
Center of display
Center of display
Center of display
Center of display
128.
612
8.6
171.8 169.8
Right Side
5050
10
19.9
43.3
257.
2
Rear
Bottom
Front Right Side Rear
75
100
75 100
288
12.5
12.5
75
100
75 100
(167.8)
333.6
(171.8)
343.6
(129
.6)
21.2
5
259.
2
(154
.85)
285.
6
4-M3 Burring (Both sides)Screw 5 mm long max.
2 743 5 61
Touch Panel Monitor UT3-B15 Series User Interface Solutions Product Information No.0093e
4
*The intereface is the same as the bezel type.
357
140.
5
29
50.5
LC
358
299.
5
200
150
25
75
75
100
100
140.
5
299.
5
357
200
30 deg.
Tilt Rotation Angle
4-5 in dia.
12.5
2 743 5 61
Outline Dimensions (Unit: mm) - Bezel and Rear Case Type -
- Bezel, Rear Case and Stand Type / Stand Monitor Type -
USB InterfaceDVI InterfaceAudio InputRS-232C InterfaceAnalog RGB InterfacePower SupplyDC Power Jack (for 12VDC)
1234567Bottom
Front
Center of display
Center of display
Center of display
Right Side
Right Side
Rear
Top
Front
Touch Panel Monitor UT3-B15 Series User Interface Solutions Product Information No.0093e
JAE User Interface Solutions Div. Proprietary.Copyright (C) 2010-2011, Japan Aviation Electronics Industry, Ltd.
5
178 178
136.
513
6.5
5050
19.9
10.7
29.8
53.2
76
184
257.
2
128.
6
75
75
100
100
2 3 4 5 61
12.5
USB InterfaceDVI InterfaceRS-232C InterfaceAnalog RGB InterfacePower Supply (12 VDC Type)DC Power Jack (for 12VDC)
123456Bottom
Front
Center of display
Center of display
Right Side Rear
4-M3 Burring (Both sides)Screw 5 mm long max.
Outline Dimensions (Unit: mm) - Optical Touch Panel and Open FrameType -
[URL: http://www.jae.co.jp]
Phone: +81-6-6447-5258 FAX: +81-6-6447-5276Phone: +81-565-34-0600 FAX: +81-565-34-0840Phone: +81-22-225-8151 FAX: +81-22-225-8059Phone: +81-28-637-8545 FAX: +81-28-637-8546Phone: +81-54-283-0664 FAX: +81-54-283-1993Phone: +81-92-262-1888 FAX: +81-92-262-1750
Osaka Branch, Osaka CityChubu Branch, Toyota CitySendai Office, Sendai CityUtsunomiya Office, Utsunomiya CityShizuoka Office, Shizuoka CityFukuoka Office, Fukuoka City
1-19, Aobadai 3-Chome, Meguro-ku, Tokyo 153-8539 JAPAN
Contact to: 1st International Operations DivisionPhone: +81-3-3780-2932 FAX: +81-3-3780-2770
Before placing an order1. The values specified in this catalogue are only for reference. The products and specifications are subject to change without notice. Contact our sales staff for further
information before considering or ordering any of our products. For purchase, a product specification must be agreed upon.2. Users are requested to provide protection circuits and redundancy circuits to ensure safety of the equipment, and sufficiently review the suitability of JAE's products to the
equipment.3. The products presented in this catalog are designed for the uses recommended below. We strongly suggest you contact our sales staff when considering use of any of the
products in any other way than the recommended applications or for a specific use that requires an extremely high reliability.
(1)Applications that require consultation:
(2)Recommended applications include:
(i)Please contact us if you are considering use involving a quality assurance program that you specify or that is peculiar to the industry, such as:Automotive electrical components, train control, telecommunications devices (mainline), traffic light control, electric power, combustion control, fire prevention or security systems, disaster prevention equipment, etc.
(ii)We may separately give you our support with a quality assurance program that you specify, when you think of a use such as:Aviation or space equipment, submarine repeaters, nuclear power control systems, medical equipment for life support, etc.
Computers, office appliances, telecommunications devices (terminals, mobile units), measuring equipment, audiovisual equipment, home electric appliances, factory automation equipment, etc.