Using STL file in Catia V5 - West Michigan CAE Users · PDF fileAN EMPLOYEE OWNED COMPANY...
Transcript of Using STL file in Catia V5 - West Michigan CAE Users · PDF fileAN EMPLOYEE OWNED COMPANY...
AN EMPLOYEE OWNED COMPANY
Using STL file in Catia V5
WWW.GTD.COM
Greenville Tool & Die
1215 S Lafayette
Greenville, MI 48838
616 754-5694
Uses for STL
• Replacement steels from other customers• Reverse engineering
• Stock for machining• Use STL scan as stock for roughing cast shape• Use STL scan to verify if enough material• Check for weld
• Spring Back• Part Inspection
Greenville Tool & Die
1215 S Lafayette
Greenville, MI 48838
616 754-5694
How you ask?
ATOS III Triple Blue light scanner
Catia V5 Surface Machining
Catia V5 Realistic Shape Optimizer (RSO)Catia V5 Digital Shape EditorCatia V5 Quick Surface Reconstruction
ATOS III Triple Scan Blue Light Scanner
Spring Back Measurements Part Inspection Reverse Engineering Rough Castings
Reverse Engineered
Customer steel
STL Scan
Final part
Greenville Tool & Die
1215 S Lafayette
Greenville, MI 48838
616 754-5694
STL for Stock
Casting from Foundry
Designed part body
Original Scan
Offset of scan to make
water tight
Part body w/ offset of scan
Roughing toolpath
Greenville Tool & Die
1215 S Lafayette
Greenville, MI 48838
616 754-5694
Use SLT scan in Vericut for machine
simulation
Verify if stock for machining
Area needs weld before machining
Compensating Surfaces For Spring Back Using Catia
V5 Generative Shape Optimizer
ATOS Viewer
Compensated Surface
Overlay Of Non Compensated
And Compensated Surfaces
Compensating Surfaces For Spring Back Using Catia V5
Realistic Shape Optimizer
With Inputs From AutoForm
AutoForm Spring
Back Information
Overlay Comparison of Autoform
Mesh and Non Compensated Surface.
Overlay Comparison Of Non
Compensated and Compensated
Surfaces.
After
Compensation
Before
Compensation
Greenville Tool & Die
1215 S Lafayette
Greenville, MI 48838
616 754-5694
Nominal shape = surface to deform
Compensated shape = deformed surface
Displacement = Deviation Analysis
Greenville Tool & Die
1215 S Lafayette
Greenville, MI 48838
616 754-5694
Part Inspection
Greenville Tool & Die
1215 S Lafayette
Greenville, MI 48838
616 754-5694Part Inspection