Using Light in Inventor Studio
-
Upload
graham-moore -
Category
Documents
-
view
222 -
download
0
Transcript of Using Light in Inventor Studio
8/4/2019 Using Light in Inventor Studio
http://slidepdf.com/reader/full/using-light-in-inventor-studio 1/2
Using Light in Inventor Studio in 9 Easy Steps
1. Your assembly environment should resemblethe following.
2. Inventor Studio can be selected from theApplications pull-down menu.
3. Select the Lighting Styles tool.
4. Here the Four Color style has been selected.
The octahedral shapes represent the lightsources. The change in lighting can be
observed, however it is clear that the lighting ismore suited for smaller assemblies and does notaccommodate the large backhoe model.
5. By right-clicking the mouse and selecting New
Style, a copy can be made.
8/4/2019 Using Light in Inventor Studio
http://slidepdf.com/reader/full/using-light-in-inventor-studio 2/2
6. The locations of the individual sources are givenon the Point tab.
7. Using this new copy, the locations of the
sources can be modified to make them friendlier
to the backhoe dimensions. Here thedimensions have been simply adjusted by a
factor of 10. When the lights have been
satisfactorily adjusted, click Save.
8. Finally, right-click the mouse to make the new
light style Active.
9. The new light style is more subtle and caters tothe dimensions of the backhoe.