Ravena Plant Page 1 of 6

Contractor Site-Specific Safety Program How to Guide for Lafarge EMPLOYEES

2/6/2008

[NOTE TO LAFARGE EMPLOYEES: this document is available to be sent to contractors]

How to Guide for Lafarge CONTRACTORS

Ensure that each contractor performing work on site reviews the Lafarge-Ravena Site-Specific Training program at least annually.

To access the site to complete a training program, to go to the following web address: http://cbt.eclipsetrainingsolutions.com/ClientSites

Important: http://cbt.eclipsetrainingsolutions.com must be set up as a trusted site on your computer. To adjust your internet security settings — select “Click Here for Technical Support” and follow the instructions.

Once you have followed the link, you will need to log into the system:

� Client Id: lafargeravena

� Password: contractors

At the next screen, click on the picture to continue…

Ravena Plant Page 2 of 6

Contractor Site-Specific Safety Program How to Guide for Lafarge EMPLOYEES

2/6/2008

Read the instructions and follow the prompts to continue through the next two screens…

If you have not used the system before, click on “No” when asked “Have you used this system before?”

If you have used the system before, click on “Yes” and select your name and company name from the drop-down lists and click on “Login”

Type in your first and last name, then click on the drop-down list to check for your company name and select it.

If your company name is not in the list, click on the “Enter new Company” button and type in the name of your company.

Press “Create My Record”

At the next screen, verify that the information is correct and click on “Continue…” or “Update my Record” to make required changes.

Ravena Plant Page 3 of 6

Contractor Site-Specific Safety Program How to Guide for Lafarge EMPLOYEES

2/6/2008

You will now see the main menu where you can select the program you are required to complete. The program will be located under the Safety heading. Click on Safety to expand the list and select the Contractor Orientation program.

Complete each section before attempting the evaluation. The reviews at the end of each section are optional, but useful.

Ravena Plant Page 6 of 6

Contractor Site-Specific Safety Program How to Guide for Lafarge EMPLOYEES

2/6/2008

When you have successfully completed the evaluation in the program, a window will display and prompt you to print your certificate. Print the certificate and card and present them to your Lafarge contact when you enter the site. If you do not have access to a printer, your Lafarge contact can check your record at the site.

Note: You must score 100% on the evaluation before a certificate can be printed. If you answer a question incorrectly, follow the prompts to review the material and try the question again.

Problems with viewing programs or printing certificates are often caused by incorrect security settings. Please check your security settings. Call Eclipse at 1-888-756-1101 for assistance. If it is absolutely impossible to take this training on-line, please see your Lafarge contact person as soon as possible to make alternative arrangements. When you arrive on site, contact your Lafarge contact person. No work can be performed prior to contacting someone at Lafarge. 1) Review the “Site Specific Discussion Guide” and obtain your hard hat sticker. 2) Start each day with a safety meeting. 3) Identify and correct any hazards 4) Work safely. 5) Report any unsafe conditions or work-related accidents to your Lafarge contact person.