User Manual

UbiQ-360

Residential eHome Portable Terminal

CopyrightThe documentation and the software included with this product are copyrighted 2010by Advantech Co., Ltd. All rights are reserved. Advantech Co., Ltd. reserves the rightto make improvements in the products described in this manual at any time withoutnotice. No part of this manual may be reproduced, copied, translated or transmittedin any form or by any means without the prior written permission of Advantech Co.,Ltd. Information provided in this manual is intended to be accurate and reliable. How-ever, Advantech Co., Ltd. assumes no responsibility for its use, nor for any infringe-ments of the rights of third parties, which may result from its use.

AcknowledgementsIntel and Pentium are trademarks of Intel Corporation.Microsoft Windows and MS-DOS are registered trademarks of Microsoft Corp.All other product names or trademarks are properties of their respective owners.

Part No. 2008036000 Edition 1Printed in Taiwan October 2010

UbiQ-360 User Manual ii

Warnings, Cautions and Notes

Warning! Warnings indicate conditions, which if not observed, can cause personal injury!

Caution! Cautions are included to help you avoid damaging hardware or losing data. e.g.

Note! Notes provide optional additional information.

iii UbiQ-360 User Manual

Declaration of Conformity

CE

This product has passed the CE test for environmental specifications when shieldedcables are used for external wiring. We recommend the use of shielded cables.

Test conditions for passing included the equipment being operated within an indus-trial enclosure. In order to protect the product from being damaged by ESD (Electro-static Discharge) and EMI leakage, we strongly recommend the use of CE-compliantindustrial encosure products.

FCC Class B

Note: This equipment has been tested and found to comply with the limits for a ClassB digital device, pursuant to part 15 of the FCC Rules. These limits are designed toprovide reasonable protection against harmful interference in a residential installa-tion. This equipment generates, uses and can radiate radio frequency energy and, ifnot installed and used in accordance with the instructions, may cause harmful inter-ference to radio communications. However, there is no guarantee that interferencewill not occur in a particular installation. If this equipment does cause harmful interfer-ence to radio or television reception, which can be determined by turning the equip-ment off and on, the user is encouraged to try to correct the interference by one ormore of the following measures: ! Reorient or relocate the receiving antenna. ! Increase the separation between the equipment and receiver. ! Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected. ! Consult the dealer or an experienced radio/TV technician for help.

Warning! Any changes or modifications made to the equipment which are not expressly approved by the relevant standards authority could void your authority to operate the equipment.

UbiQ-360 User Manual iv

Safety Instructions1. Read these safety instructions carefully.2. Keep this User Manual for later reference.3. Disconnect this equipment from any AC outlet before cleaning. Use a damp

cloth. Do not use liquid or spray detergents for cleaning.4. For plug-in equipment, the power outlet socket must be located near the equip-

ment and must be easily accesible.5. Keep this equipment away from humidity. 6. Put this equipment on a reliable surface during installation. Dropping it or letting

it fall may cause damage.7. The openings on the enclosure are for air convection. Protect the equipment

from overheating. Do NOT COVER THE OPENINGS.8. Make sure the voltage of the power source is correct before connecting the

equipment to the power outlet.9. Position the power cord so that people cannot step on it. Do not place anything

over the power cord.10. All cautions and warnings on the equipment should be noted.11. if the equipment is not used for a long time, disconnect it from the power source

to avoid damage by transient overvoltage.12. Never pour any liquid into an opening. This may cause fire or electrical shock.13. Never open the equipement. For safety reasons, the equpment should be

opened only by qualified service personnel.14. If one of the following situations arises, get the equipment checked by service

personnel:� The power cord or plug is damaged.� Liquid has penetrated into the equipment.� The equipment has been exposed to mositure.� The equipment does not work well, or you cannot get it to work according to

the user�s manual.� The equipment has been dropped and damaged.

15. DO NOT LEAVE THIS EQUIPMENT IN AN ENVIRONMENT WHERE THE STORAGE TEMPERATURE MAY GO BELOW -20° C (-4°F) OR ABOVE 60° C (140° F). THIS COULD DAMAGE THE EQUIPMENT. THE EQUIPMENT SHOULD BE IN A CONTROLLED ENVIRONMENT.

16. CAUTION: DANGER OF EXPLOSION IF BATTERY IS INCORRECTLY REPLACED. REPLACE ONLY WITH THE SAME OR EQUIVALENT TYPE RECOMMENDED BY THE MANUFACTURER, DISCARD USED BATTERIES ACCORDING TO THE MANUFACTURER�S INSTRUCTIONS.

The sound pressure level at the operator�s position according to IEC 704-1:1982 isno more than 70 dB (A).

DISCLAIMER: This set of instructions is given according to IEC 704-1. Advantechdisclaims all responsibility for the accuracy of any statements contained herein.

v UbiQ-360 User Manual

ManufacturerAdvantech Co., Ltd. No.1, Alley 20, Lane 26, Reuiguang Road Neihu District, Taipei, Taiwan 114, R.O.C. TEL: (02)27927818

Distributed in European byAdvantech Europe GmbH Kolberger Straße 7D-40599 DÜsseldorf, GermanyTel: 49-211-97477350Fax: 49-211-97477300

Visit the Advantech websites at www.advantech.com or www.advantech.com.tw ifyou need more information.

Technical Support and Assistance1. Visit the Advantech web site at http://support.advantech.com where you can find

the latest information about the product.2. Contact your distributor, sales representative, or Advantech's customer service

center for technical support if you need additional assistance. Please have the following information ready before you call:� Product name and serial number� Description of your peripheral attachments� Description of your software (operating system, version, application software,

etc.)� A complete description of the problem� The exact wording of any error messages� This equipment is a source of electromagnetic waves. Before use please,

make sure that there are not EMI sensitive devices in its surrounding which may malfunction therefore.

Instructions for the UserThe document combines text and illustrations, providing a comprehensive overviewof the system. The information is presented as sequential steps of action, allowingthe user to learn directly how to use the device. The text provides explanations and instructs the user step by step in the practical useof the product, with short, clear instructions in easy-to-follow sequence.

UbiQ-360 User Manual vi

ContentsChapter 1 Introduction..........................................1

1.1 Overview ................................................................................................... 2Figure 1.1 Overview of the UBIQ-360.......................................... 2

1.2 System Configuration................................................................................ 3

Chapter 2 Hardware and Software Description..52.1 Product Features....................................................................................... 62.2 Mechanical Specifications......................................................................... 7

Figure 2.1 UbiQ-360 Dimensions ................................................ 7Figure 2.2 Cradle Dimensions ..................................................... 8Figure 2.3 Front View .................................................................. 9Figure 2.4 Left Angle View........................................................... 9Figure 2.5 Rear View ................................................................... 9

2.3 Hardware and Software Specifications ................................................... 10Table 2.1: Hardware .................................................................. 10

Chapter 3 Design Requirements........................113.1 Environmental Specifications .................................................................. 123.2 Reliability................................................................................................. 12

vii UbiQ-360 User Manual

UbiQ-360 User Manual viii

Chapter 1

1 IntroductionThis chapter briefly introduces theUbiQ-360 product.

1.1 OverviewThe UbiQ-360 residential terminal is a standard Advantech product with MicrosoftWindows® CE operating system built in. In addition to home appliance control,remote monitoring/security and home service functions, the speed of the processorand the WiFi-enabled architecture allow the UBIQ-360 to function as an integratedhome/office automation gateway. The UBIQ-360 is equipped with a Freescalei.MX31 523 MHz processor, a 7" touchscreen display, a built-in WiFi module andaudio. It serves as the key automation solution and smart remote controller for ahome, office, or building security configuration. It connects services and emergencycall capabilities of an apartment unit to the administration center via a WiFi connec-tion.

The UbiQ-360, a unique touch control computer offers the convenience of highly con-figurable features, and is designed for portable eHome/eOffice/Building applications.The FreeScale i.MX 31 processor is combined with the Microsoft Windows® CE 5.0operating system, delivering a high performance, reliable, fanless portable touch con-trol computer system.

Microsoft WinCE® 5.0 enables a user-friendly and attractive GUI interface that isideal for all eHome/eOffice/eBuilding applications. The built-in FreeScale i.MX31 pro-cessor together with a 7.0" 16:9 true color TFT LCD provide excellent graphical per-formance. The UbiQ-360 is equipped with a built-in speaker and microphone thatfunction as an intercom, either through a direct analog audio interface, or via a LANconnection. The stylish design features and smooth glazed finish of the UbiQ-360makes it an elegant addition, easily fitting in to any home or building environment. Avariety of I/O interfaces and easily-accessed programmable hotkeys are available foreasy peripheral integration.

The main features of the UbiQ-360 touch control PC are:! High performance platform with FreeScale i.MX31 processor ! Built-in microphone and speaker! 7" TFT LCD with touchscreen! Function keys for power on/off, mute, volume and channel adjustment! Equipped with one USB2.0 port and one SD slot! Dedicated cradle (by request)! Microsoft Windows® CE 5.0! WiFi 802.11 b/g (optional)! Advantech SUSI API manager is supported for easy SI development

Figure 1.1 Overview of the UBIQ-360

UbiQ-360 User Manual 2

Chapter 1

Introduction

1.2 System ConfigurationA block diagram of the UBIQ-360 residential terminal home automation environ-ment is shown in the following diagram:

iMX-31 CPU

523Mhz

DDR 256MBSAMSUNG-K4X1G163PE

External Memory

Interface (EMI)

3.3V to 1.8V

74VCX163245MTD

(RAM control part)

External Memory

Interface (EMI)

3.3V Data-Bus1.8V Address-Bus

(DATA-BUS process)

NOR Flash ROM EON-EN29SL800B(Boot-Loader)

1.8V LOGIC

1.8V LOGIC

External Memory

Interface (EMI)

3.3V Data-Bus1.8V Address-Bus

(DATA-BUS

process)

UART

CONTROLLEREXAR-XR

16L2751CM(Address process)

3.3V to 1.8V

TI-SN74LVTH245

3.3V LOGIC

1.8V to 3.3V LOGIC

3.3V to 1.8V LOGIC

NAND Flash ROM SAMSUNG-K9F2G08U0A(OS Image)

3.3V LOGIC

SD/MMC Interface

NO.2, 3.3V LOGIC (CN10 Output)

SD/MMCCard Slot

SD/MMC Interface

NO.1, 3.3V LOGIC (CN9 Output)

WLAN ModuleSD interface

I2S Interface

3.3V LOGIC

Audio CODECWOLFSON-

WM8750

Speaker AMP.

NS-LM4871M

(CN17 Input)MIC

Echo

Canceller

FM2010-

NE

(CN16 Output)Speaker Connector

TTL LCD Interface

3.3V LOGIC

Samsung LMS700KF077 inch TFT LCD module

SPI InterfaceTP Controller

ADS7846E

GPIO InterfaceRTC Controller

HOLTEK-HT1381

3.3V LOGIC

3.3V LOGIC

ULPI InterfaceUSB ControllerISP1504ABS

3.3V LOGIC

USB-3(CN5)

Keypad Interface6 set Key Input3-Set LED indicator

3.3V LOGIC

(CN6)

UART InterfaceRS-232 TransceiverMAX3243CAI

3.3V LOGIC

(CN8) UART-1

PMICTPS65020RHAR(CPU Core

System PowerTPS51120RHBT(I/O power)

Battery3S1P 2200mAh 12.6V MAX.

DC Input(Adapter

or Cradle)

(19V DC)

PAGE-14

(CN3 Input)H/W RESET

GPIO LED Ctrl

For Debug

FREESCALEMC13224VZigbee

UART_A 3.3V LOGIC

3.3V LOGIC

5V power / 2W

MiniPCI Express interface

Chargeing

3.3V LOGIC

MiniPCI Express interface

I2C InterfaceMCU

ST_STM32F101C4T6

3.3V LOGIC

3-wire

RF pagerMICRF506YML

2.5V LOGIC

CIR

Level Shifter

Level Shifter

power)

3 UbiQ-360 User Manual

UbiQ-360 User Manual 4

Chapter 2

2 Hardware and Software Description

2.1 Product FeaturesThe UbiQ-360 is a smart portable touch terminal for eHome/Building applications,designed especially for multimedia and entertainment. UbiQ-360 has a slim, attrac-tive appearance suitable in the home, and its IR transceiver and WiFi give it remotecontrol capabilities. The product features:

! High performance platform with FreeScale i.MX31! Built-in microphone and speaker! 7" TFT true color LCD display with touchscreen (16:9 aspect ratio)! Function keys for power on/off, mute, volume and channel adjustment! Supports a USB 2.0 port and an SD slot! Microsoft Windows® CE 5.0 operating system! WiFi 802.11 b/g! Long battery life! Supports Zigbee (optional)! System cradle (optional)! Advantech SUSI API manager supported for easy SI development

The UbiQ-360 is a portable touchscreen terminal that enables residential and com-mercial customers the ability to control anything from audio, video and communica-tions appliances to lighting, climate and security devices. Windows CE 5.0 provides aslick graphical user interface and an IR port accepts sending or receiving of remotecommands convenient operation.

Advantech Intelligent Services strives to deliver its "Ubiquitous" product line every-where, building a product with comfort, convenience, safety, and energy-conscious-ness in mind. Advantech�s experience in embedded system technology has led to thedevelopment of "UbiQ Scenario Master" lighting scenario control modules. This prod-uct line is compatible with community security monitoring and intercom systems, aswell as standard control panels. Whether it's household space, or commercial venuessuch as hotels, restaurants, and boardrooms, customers can enjoy the amenity andcomfort of Advantech's living solutions delivering a combination of remote monitoringand internet-controlled systems.

UbiQ Scenario Master is currently an integral part of numerous developmentprojects, including luxury homes in Taiwan, India, Dubai, Australia, with more interna-tional markets joining. Advantech's UbiQ Scenario Master has won a place amonglighting scenario control modules in digital homes worldwide.

UbiQ-360 User Manual 6

Chapter 2

Hardw

areand

Softw

areD

escription

2.2 Mechanical SpecificationsSystem Dimensions: 230 (W) x 148.5 (H) x 30.39 (D) mm

Figure 2.1 UbiQ-360 Dimensions

7 UbiQ-360 User Manual

Figure 2.2 Cradle Dimensions

UbiQ-360 User Manual 8

Chapter 2

Hardw

areand

Softw

areD

escription

Overview

Figure 2.3 Front View

Figure 2.4 Left Angle View

Figure 2.5 Rear View

9 UbiQ-360 User Manual

2.3 Hardware and Software Specifications

Software ManualSuSi 3.0 User Manual: http://www.advantech.com/ess/download.aspx

Windows CE SDK: http://www.advantech.com/ess/download.aspx

Table 2.1: HardwareProcessor Freescale i.MX31 523 MHz

MemorySize 256 MBModule Type DDR DRAM

2nd Cache Memory N/A

Display

Size/Type 7" TFT color LCDMax. Resolution 800 x 480

Brightness (cd/m2) 280 cd/m2Viewing Angle 130/110Brightness Control PWM

VGA Chipset CPU build-in

HDD/TypeNAND 256 MB flash on board, SD Slot (optional, up to 2 GB)

I/O Port USB 2.0 Port x 1

PowerOutput Rating 19 VDCInput Voltage 100 ~ 240 VAC

Touchscreen

Technology Resistive (controller)Control Port CPU SPI interfaceLight Transmission > 80%OS Support Windows CE 5.0Touch Life Cycle 10 million touches

Working Temperature 0 ~ 40° CCertifications CE/FCC Class B, CCC, BSMI, ULDimensions 130 x 210 x 280 mm (5.12" x 8.27" x 1.81")

UbiQ-360 User Manual 10

Chapter 3

3 Design Requirements

3.1 Environmental SpecificationsTemperature & Humidity! Operating Temperature: 0 ~ 40° C! Storage Temperature:0 ~ 60° C! Relative Humidity:0 ~ 95% RH (Non-condensed)

Case / Panel Temperature! Less than 40° C @ 25° C ambient temperature (front bezel)

Certifications! CE! FCC class B approved! UL ! CCC! 18 ~ 500 Hz, 1 G acceleration

3.2 ReliabilityMTBF! 20,000 hours

Touchscreen! 1 million touch actuation times on a single point with a 5/8" diameter silicon fin-

ger under a 350 g load at 2 Hz

Power Requirements! DC Input Voltage: 19 V! Power Consumption: less than 8 W (adapter: no less than 8 W)

Note! 1. This product is intended to be supplied by a listed power unit marked "Class 2" and rated O/P: 19 Vdc, minimum 3.16 A.

2. Make sure external power adapter (includes power cords and plug assemblies) provided with the unit is certified and suitable for use in the country in which the unit is operated.

UbiQ-360 User Manual 12

Chapter 3

Design

Requirem

ents

13 UbiQ-360 User Manual

www.advantech.comPlease verify specifications before quoting. This guide is intended for referencepurposes only.All product specifications are subject to change without notice.No part of this publication may be reproduced in any form or by any means,electronic, photocopying, recording or otherwise, without prior written permis-sion of the publisher.All brand and product names are trademarks or registered trademarks of theirrespective companies.© Advantech Co., Ltd. 2010

15 UBiQ-360 User Manual