User Manual Tripod A4

download User Manual Tripod A4

of 16

Transcript of User Manual Tripod A4

  • 7/29/2019 User Manual Tripod A4

    1/16

    Setzen Sie hier Ihre Botschaft ein. Die beste Wirkung erzielenSie, wenn Sie sich auf zwei oder drei Stze beschrnken.

    Instruction manualTripod

    B E R G R E T T U N G T I R O L

    Contents:

    x Necessary Equipment

    x Working instructions

    Sponsored by Millet

    New rescue method for crevasses

  • 7/29/2019 User Manual Tripod A4

    2/16

    PAGE 1

    Bergrettung Tirol

    Required materials for working with the tripod

    Material in detail:

    Tripod

    Carabinres

    5x

    5 Steel-carabiners oval shape. Breaking loadover 3000 kg.

    The whole material is selected to be transported by a small rescue team in backpacks

    Weight 14,5 kg, packed in thetransport bag

  • 7/29/2019 User Manual Tripod A4

    3/16

    PAGE 2

    Bergrettung Tirol

    Required Material

    2 Pro Traxion

    2x

    1 Swivel

    2 Tubular slings

    2 double pulleys

    Self blocking carabiners

    2x

    2x

  • 7/29/2019 User Manual Tripod A4

    4/16

    PAGE 3

    Bergrettung Tirol

    Required material

    1 Rescue triangle

    2 Carrying frames

    1 Static rope 200 Meter 9 mm

    1 Static rope 10 Meter

    1 Power aggregate1 Chipping hammer 1 Chisel1 Extension cable

    Fuel, First aid, Vacuum matress,Rescue bag or stretcher

    1 Accessory cord 6 mm 3 Meter

    Further required materials

    1 Accessory cord 6 mm 7 Meter

  • 7/29/2019 User Manual Tripod A4

    5/16

    PAGE 4

    Bergrettung Tirol

    Set-up instruction

    Move the connector part over one foot tube

    Attach the 10 m static rope to the connector partwith a "Sackstich" - knot

    Now, the three tubes of this foot are put together:x Foot-tubex 1 Meter ectension tubex Head tube

    After the three feet are put together, they are securedwith the cord inside the tubes.

    Check of areaBefore you start working, carefully check the area.For this, a shovel, a probe and an ice-ax are required.After checking the position of the victim, a ropesecuring must be set up on the ground in order tosecure the rescue team.

    Set-up of the tripod:

  • 7/29/2019 User Manual Tripod A4

    6/16

    PAGE 5

    Bergrettung Tirol

    Set-up:

    Secure the connector part with the boundin 10 mm static rope (as described before). push the end of this static rope throughtthe head-roll of this foot.

    Secure the connector part against slippingdown with a "Spierenstich" knot

    Now the 6 mm 7 m accessory cord is attachedto one anchor-ring with a "Ankerstich" knot.The "long" (extended) tube now is movedto the opposite side of the crevasse.

    Now, put together the next foot and attach itto connector part as described at the next page.

  • 7/29/2019 User Manual Tripod A4

    7/16

    PAGE 6

    Bergrettung Tirol

    Inha

    Attention:The extended foot must always stand at the lower sideof the crevasse.

    Now the head part is attached to the connector partwith a steel carabiner as shown. The screw lock must look forward and down.

    Attach the third foot in the same way.

    Connector part with attached feet.

    Now push the end of the 10 mm static rope throughone head roll and guide it down as shown.

    Set-up

  • 7/29/2019 User Manual Tripod A4

    8/16

    PAGE 7

    Bergrettung Tirol

    Further advices:

    Now adjust the connector part andclose the Mini Traxion.

    Attach a Mini Traxion to the sling andlead the 10 Meter Staticrope through it

    Now the connector part is secured andcan be adjusted as required.

    Secure the end of the 10 meter staticrope with a knot.

    Put a short tubular sling through one ring

    1

    65

    43

    2

  • 7/29/2019 User Manual Tripod A4

    9/16

    PAGE 8

    Bergrettung Tirol

    Set-up

    RIGHT!!! At this setup, the tripodcan be loaded.On this picture, the ground fixation(connection) of the three feet can beseen. The next pictures show you howthis is made.

    WRONG!!! The short feet must be positioned further forward! In this setupthe tripod would tip over under load!

  • 7/29/2019 User Manual Tripod A4

    10/16

    PAGE 9

    Bergrettung Tirol

    Set - up

    It is important that all three feet are connected safely with ropes in order to preventthe feet from moving to the side and thus causing a collaps of the tripod.This is done with a rope and pulley system and a securing knot or a blockingdevice.

    3

    2,5

  • 7/29/2019 User Manual Tripod A4

    11/16

    PAGE 10

    Bergrettung Tirol

    Set-up

    After the tripod is positioned correctly and the feet are secured safely, the200 meter static rope is knotted into the top double pulley. Now, the rope isguided through the rolls to form a pulley block.

    Attention:The distance between the shortfeet and the extended foot mustnot exceed 3,50 meters

    Attention:The distance between the two shortfeet must not exceed 2,50 meters

    2,53,5

  • 7/29/2019 User Manual Tripod A4

    12/16

    PAGE 11

    Bergrettung Tirol

    A steel carabiner is attached into the lower roll.Into this carabiner, the swivel is attached.Into this swivel, the carabiner for the rescuer is attached.

    One steel carabiner is attached centrally intothe connecto part.

    To this carabiner, the pulley block is attached.

    Setup from above:Moving part with steel carabiner Pulley block Steel carabiner with swivelSteel carabiner for the rescuer

    Weitere Aufstellungshinweise!

  • 7/29/2019 User Manual Tripod A4

    13/16

    PAGE 12

    Bergrettung Tirol

    Set - up

    As soon as the rescuer is positioned, the Pro Traxionis closed. To open it, pull the rope slightly.

    ATTENTION: Watch out for the correct ropedirection in the Pro Traxion!!!

    The 200 m rope is laid into the Pro Traxion

    The fixation of the 200 m static rope is done with aPro Traxion.

    For this, a tubular sling is attached to one anchor ring.

  • 7/29/2019 User Manual Tripod A4

    14/16

    PAGE 13

    Bergrettung Tirol

    Pro Traxion for the adjustment of the connector part

    Pro Traxion for the rope of the rescuer.

    The rescuer is secured as shown and picks up therequired rescue tools.

    The rescuer secures himself to the above explainedcarabiner for the rescuer under the Swivel.To pick up the victim, a tubular sling with another Steel carabiner into this carabiner .

    The pulley-block is now hanged in.Both the 10 m and the 200 m static ropesare blocked in their rope blockers.

    Set - up, securing for rescuer and victim

  • 7/29/2019 User Manual Tripod A4

    15/16

    PAE 14

    Bergrettung Tirol

    Positioning of the rescuer

    Pro Traxion toadjust theconnector part

    Pro Traxion toposition rescuerand victim

  • 7/29/2019 User Manual Tripod A4

    16/16

    PAGE 15

    Bergrettung Tirol

    Lowering the rescuer into the crevasse

    The rescuer islowered with adescender

    The person at thedescender shall be secured

    seperately, eventhough the

    pulley block reduces the pull in

    the rope.As soon as therescuer hasreached the victim,he/she secures the

    victim with thesteel carabiner.

    After freeing thevictim, rescuer and

    victim can be pulledup together by

    2 - 4 rescuers

    BRD Tirol2005 VP