User Manual: Getting Started - Amazon Web Serviceshackerarsenal.com.s3.amazonaws.com/winx.pdf ·...
Transcript of User Manual: Getting Started - Amazon Web Serviceshackerarsenal.com.s3.amazonaws.com/winx.pdf ·...
User Manual: Getting Started
GettingStarted:802.11b/g/nWi-FiScanner
TheScannerprogramisthedefaultfirmwareonyourdevice.Thishasbeen pre-flashed and tested to ensure the device is working asexpected. When you power up the device, this program runsautomatically and scans the air. It then reports the list of SSIDs,BSSIDs, Channel, RSSI, HT20/40 use and Authentication in thevicinity.The restof thisdocumentdiscusseshowtoconnect to thedeviceandviewtheoutputoftheScannerprogramandalsohowtore-flashthescannerprogramonthedeviceifyouneedto.
Scanner:ConnectingonaMac/Linux/WindowsWewillbecommunicatingwiththedeviceusingitsserialportwhichisavailable through theUSB interface.Hence,wewillneeda serialmonitorprogramtotalktoourdevice.
Windows:Step1:DownloadandinstallPuttyfrom
https://www.chiark.greenend.org.uk/~sgtatham/putty/latest.html
Step2:StartPutty,configuretheSerialLinetoCOMX(findtheportnamebyusingtheDeviceManager)withSpeed921600.ClickOpen.
Step3:
Youshouldnowbeabletoseethescanresultsintabularformatwithinafewseconds.
Linux:WewillbeusingUbuntu,butstepswouldbesimilarforotherLinuxdistributions.
Step1:InstallPutty
Step2:LaunchPutty,selectConnectionTypeasSerial,Speedas921600andSerialLineas/dev/ttyUSB0orthecorrectportpath.
ClickOpentohavePuttyconnecttothedevice.
Step3:Youshouldnowbeabletoseethescanresultstable.Thedeviceautomaticallyinitiatesanewscaneveryfewseconds.
Mac:YouwillhavetoinstalltheCP2102driverstousethedeviceonaMAC.Youcandownloadandinstallthedriversfromhere:
https://www.silabs.com/products/development-tools/software/usb-to-uart-bridge-vcp-drivers
Onceyouhavesuccessfullyinstalledthedriver,pleaseusethestepsbelow:
Step1:
Step2:
Step3:Youshouldnowbeabletoseethescanresultstable.Thedeviceautomaticallyinitiatesanewscaneveryfewseconds.
Troubleshooting:
• Ifyoudonotseeanyscanresultsoroutputthenpressandreleasethe“EN”buttononyourdevice.Thisshouldresetthedeviceanditshouldrestartthescanningprogram.
• Ifyoustillhaveproblemswithviewingtheoutputthenitmightbeagoodideatore-flashthedevicewiththefirmware.