USER MANUAL - EC21 · After-sales services ---- 19 Please read this User’s Manual Product...
Transcript of USER MANUAL - EC21 · After-sales services ---- 19 Please read this User’s Manual Product...
Y
E
G
A
MV
SPA- 1 / 22 -
USER MANUAL
MV SPA
Y
E
G
A
MV
SPA- 2 / 22 -
Contents
BeforeUse
Safety Precautions --- 2 ~ 7
To Use
Parts & Functions ------ 8-9To Connect Hoses ------ 10To Use ------- 11Precaution for Use ----- 12
To Clean To Clean ---- 14
Trouble Shootin
g
Checks before calling customer services -----15 ~ 16
Reference
Product Specifications ----- 17After-sales services ---- 19Product Warranty ---- 20 ~ 21Please read this User’s Manual
for correct use
MV SPA
Y
E
G
A
MV
SPA- 3 / 22 -
Safety Precautions
‘Safety Precautions’ should be carefully observed to prevent potential accidents and risks. Precautions consist of the following “Warning” and “Caution” messages. Precautions consist of the following “Warning” and “Caution” messages
Please READ these instructions carefully before use..
! This symbol indicates a potential risk. To prevent such risk,please observe the instructions.You MUST avoid an action which is marked with this symbol.
Do not immerse the Product in water.
If accidentally immersed in water, unplug the power plug from the mainoutlet and contact the nearest retaileror the Service Center.
Take care not to trap the power cable in doors or other objects.
This may damage the power cable leading to fire or electricshock
Do not use the Product if any abnormality is shown on the Product.
WarningCaution
Warning
Clean the pins of the plug with a dry cloth if contaminated bywater or dust.
Otherwise this may cause fire or electric shock.
Unplug the power plug from themain outlet and contact thenearest retailer or the Service Center
Y
E
G
A
MV
SPA- 4 / 22 -
Do not touch or remove the power plug with wet hands.
This may cause electric shock.
Do not use many plugs on one socket.
If the socket is overheated, it may cause short-circuiting or electric shock.
Do not cover the Product with during use.
This may cause product breakdown.
Do not connect the plug upwards on the socket.
This may cause fire or electric shock.
Do not place heavy objects on the power cable.
This may damage the power cableleading to fire or electric shock.
Always plug into a suitable socket(AC 220V).
This may cause fire or electric shock..
Do not staple down the power cable to affix to surfaces.
This may cause electric shock.
Do not damage the power cable by extending or altering.
This may cause fire or electric shock.
Y
E
G
A
MV
SPA- 5 / 22 -
Remove the power plug from the socket when cleaning or checking.
This may cause electric shock
Do not damage the power cable by extending or altering.
This may cause fire or electric shock.
Do not exert heavy impact On or drop the Product.
This may cause breakdown andSafety problems.
Do not place the Product on uneven surfaces
Take care that the Product does not fall. This may cause breakdown.
Do not mount or sit onthe Product.
Care must be taken with childrenin particular.
Do not install the Product Where it becomes vulnerable to excessive water exposure or deposits.
This may cause short circuiting or electric shock.
Caution
Y
E
G
A
MV
SPA- 6 / 22 -
Do not use loose power cables, plugs or sockets.
This may cause fire or electric shock
Do not pull on the cable to remove the plug.
This may cause fire orelectric shock
Do not use the Product whilst leaving the nozzle head of the water inlet outside water for a long time.
It may cause breakdown.Nozzle head of the water inlet↑IN↑.
Nozzle head of the water inlet↑IN↑.
Y
E
G
A
MV
SPA- 7 / 22 -
Do not use household detergentsto clean the Product or harsh abrasive chemicals or sponges.
This may damage the Main Body.
Do not place heavy or unsteady objects on top of the Product.
This may damage the Main Body orcause a malfunctioning in the switches.
Earth the power plug
If plugged into a socket that has an earth connection, no extra earthingis necessary.
Always clean the filters and parts on the Water InletAnd Outlet after use.
This may reduce the amountof bubbles and breakdown..
When carrying, support the Product by holding the lower part of the Main Body.
This may cause scratches or breakdown.
This Product is for household use only.
Other use may cause breakdown.
Do not insert the filter parts or nozzle hoses in excessively hot water.
This may cause deformation on thefilter parts or nozzle hoses.
Do not use any bath products (shower gel, bath gel, Bubble Spa etc)
This may cause blockage on the filter,or no bubbling at al.
Earth Connection
No more 50℃
Y
E
G
A
MV
SPA- 8 / 22 -
Parts & Functions
Control Panel
Detail Control Panel
A small amount of water remains inside the product for test purposes.
20 Min.
PowerSwitchWater
IN,OUT
PE Cap
Remove the PE Cap when connecting the hoses.the remaining water will come outwhen the PE Cap is removed.
To be connected to the Inlet on the Main Body To be connected to the
Outlet on the Main Body
Mail BODY
Rubber Pad
Inlet Hose
Outlet Hose
Adapter
Y
E
G
A
MV
SPA- 9 / 22 -
Inlet Hose (IN)
Outlet Hose (OUT)
헤드 커버Inlet Nozzle Head Head Cover
Filter Packing
Middle Cap
(Use a coin to turn the Middle Cap to tighten or loosen.)
Outlet Nozzle Head
PlatePlasticScreen
Head Cover
Y
E
G
A
MV
SPA- 10 / 22 -
1
To Connect Hoses
Remove the PE Caps on the Inlet and Outlet on the Main Body.
2 Hold the Hose and slide down the Sleeve.
Please check that the correct Hoses for IN and OUT are connected to the corresponding Sleeve
3 Connect the Hoses to the corresponding Inlet and Outlet on the Main Body.
Push in the Hose while pulling down the Sleeve.Once connected, release the Sleeve to secure the connection.
PE CAP
Sleeve
Inlet
Outlet
When the PE Cap is removed a small amount of water retained inside the Product will come out for test purposes.
Y
E
G
A
MV
SPA- 11 / 22 -
To Use
For General Bubble Spa
Adjust the water temperature slightly lower than normal bath water.
Remove all facial make-up before taking a bath.
Foreign materials will float on the surface at Auto Stop. Please remove the foreign materials by letting the water overflow.
If you have a long bath, follow the steps 1 to 7 on the right hand sideinstead of operating the Product at first instance.
1. Immerse the Inlet/Outlet Nozzle Heads inside the bath tub.
3. Take a shower.
White bubbles will spout out.
4. Soak your body in the bath tub.
5. The Product will automatically stop in 20 minutes.
6. Come out of the bath tub.
7. Rinse.
2. Touch on the Power Button (ON).
Keep a distance of at least 50cm from the Inlet Nozzle Head to the Outlet Nozzle Head.
To discharge water from the tank when you turn off the Power button, or after the Auto Stop, the small air pump will operate for 3 minutes. If the water is not completely emptied from the tank, bubbles will not spout out in following usage.
When air intake is insufficient, bubbles may temporarily become thinner during use. Expose the Inlet Nozzle Head to the air outside of the water to idle.
Y
E
G
A
MV
SPA- 12 / 22 -
For Bubble Shower
To have a brief shower using the bubbles
1. Immerge the Inlet Nozzle Head into the washing basin or bath tub and run the water.
2. Turn on the Product.
3. Bubbles will spout out from the Outlet Nozzle Head.
4. Adjust the quantity of water.
5. Hold the Outlet Nozzle Head to wash hair or have a bubble shower.
Y
E
G
A
MV
SPA- 13 / 22 -
Precautions for Use
To disassemble the Nozzle Head for cleaning
All parts in the correct order
Do not operate the Product whilst leavingthe Inlet Nozzle Head outside of water.
Care of the Nozzle Head
Floating matter during bathing Distance between the Inlet and the Outlet Nozzle Heads
For proper and best use of the Product, please observe the following.
Hold the Nozzle Head and the Head Cover and bend down to open.
Each part of the Inlet and Outlet Nozzle Heads must be assembled in the correct order. (see Page 9)
Take care not to block the Inlet and Outlet Nozzle Heads.
Keep a distance of at least50cm between the Inlet and Outlet Nozzle Heads.
Allow the water to overflowin order to removefloating matter.
Y
E
G
A
MV
SPA- 14 / 22 -
To Clean
To clean each part of the Nozzle Head
1. To Clean the Inlet Nozzle Head
Use a tooth brush or a soft brush to clean the stainless steel filter. (prior to use)
SUS 망사
2. To Clean the Outlet Nozzle HeadSeparate the parts of the Outlet Nozzle Head and use a tooth brush or a soft brush to clean each part.
Assemble the parts in the correct order after cleaning. (see Page 9)
To Clean the Main Body
To avoid damage or scratching, observe the following
Clean the Product with a soft wet cloth for general cleaning. Use a small amount of neutral detergent to clean. Use a wet cloth
to clean off.
Remove the power plug from the power socket before cleaning.
Do not clean the Product with harsh bathroom or household detergents, benzene, thinner, cleanser or nylon scrubber to avoid damage to the Main Body.
SUS Screen
Warning
Caution
Y
E
G
A
MV
SPA- 16 / 22 -
No bubbles spouting during use
• Check if the Nozzle Head is out of the waterduring use.
Expose the Inlet Nozzle Head to the air outside water to idle for about 20 seconds.
Water coming out from the bottom of the Main
Body
• A little amount of water may come out from the bottom of the Main Body during use. This is normal as the water circulates with the air during the automatic pressure control inside the pressure tank in the Main Body.
Check PointProblem Trouble Shooting
Y
E
G
A
MV
SPA- 17 / 22 -
Product Specification
1
2
3
4
5
DC 40V POWER
90WConsumption
4+-0.5 L/MINStandard Flow
20 MINBath Time Setting
GERNERAL HOUSEHOLD BATHTUB, 200 L
Bathtub
5 ~ 40 ℃Water Temp.
W390 * D200 * H290Dimension
7KgWeight
6
7
8
The Product specification and design may be subject to change without prior notice .
Y
E
G
A
MV
SPA- 18 / 22 -
Consumer Indemnity
Type of Consumer InjuriesRelief
Within warranty Outside warranty
In case of normal breakdown or malfunction under normal use (within the warranty period)
If major repair is necessary within 10 days after purchase Replacement or refund
If repair on major parts is necessary within 1 month after purchase
Replacement
If the replaced product requires major repair within 1 monthRefund
If replacement is impossible
If there is a defect Complimentary repair service
If the same defect reoccurs after repair (on the 4th defect)
Replacement or
Refund
If defects keep occurring after 4 repairs in total (on the 5th defect)
If the product becomes irreparable
If product repair is unfeasible due to lack of parts for repair Refund the depreciated value plus 10% of that valueIf the product returned to a retailer for repair gets lost
If damage occurs during transit or installation after purchase Replacement
Product breakdown or malfunction due to consumer’s accidental or intentional act
If the product is repairableChargeable repair service
If the product is irreparable due to no parts for repair in stock Replacement after deducting the value equivalent to the chargeabl
e repair service
• breakdown due to force majeure (fire, sea water, earthquake, storm/flood)• replacement of consumable parts for normal wear and tear• breakdown due to faulty power supply or connector• breakdown due to external factors other than the defects on the product itself• breakdown due to unauthorized repair or alteration
Chargeable repair serviceChargeable repair service
Y
E
G
A
MV
SPA- 19 / 22 -
Ministry of Strategy & Finance
Consumers’ Rights
Consumers have valuable rights to complimentary services for a period of one yearfrom the date of purchase against Product breakdown during use. If however the breakdown is due to consumers’ own fault or force majeure, repair services will be charged even during the warranty period
Chargeable Services
After-sales services will be provided at cost even during the warranty period if the breakdown is due to one of the following:
1. If foreign materials (such as water, drink or small object) get inside the Product2. If the Product is dropped or subject to severe impact3. If the Product is exposed to abrasive solvents such as thinner or benzene4. If non-genuine parts or consumables are used5. If incorrect electricity voltages are applied6. If parts or components are lost or damaged by unauthorized disassembly7. If the product is altered or repaired by an unauthorized technician8. If the product is damaged due to force majeure (lightening, fire, storm/flood, gas, sea water, earthquake, etc)9. If the “safety warnings” in the User’s Manual are not observed
(Product life can be extended if the “safety warnings” are duly observed.)10. If the breakdown is due to users’ fault
Y
E
G
A
MV
SPA- 20 / 22 -
Product Name: Nano/Micro Bubbler (for home use)
Model Name :
Date of Purchase :
Name of Customer: Tel: Address:
Name of Retailer: Tel: Address:
1. Please fill out all necessary data before giving to the customer.2. This Customer Card should be retained by the Retailer for Customer Care.
Others:
Customer CardWarrantyis 1 year
Y
E
G
A
MV
SPA- 21 / 22 -
Product Name: Nano/Micro Bubbler (for home use)
Model Name :
Date of Purchase:
Name of Customer: Tel: Address:
Name of Retailer: Tel: Address:
Please keep this Warranty safe as you will be asked to showthis Warranty at the time of claiming your After Sales Services.
1. The Company provides the Product warranty in accordance with the terms and conditions of the Warranty.2. The warranty period takes effect from the date of purchase. Please ensure that the date of
purchase is written in the Warranty. (If the date of purchase is not shown, the warranty period shall be deemed to be effective as of 6 months from the date of manufacture.)
3. If the Product is used for commercial use (for sales purposes or for other use), or the product is for industrial use, then the warranty period shall be shortened to 6 months.
4. This Warranty shall not be reproduced.
Product Warranty
Y
E
G
A
MV
SPA- 22 / 22 -
QUICK REFERENCE
1. The water temperature for Bubble Spa should be within the range of 38~40ºC.
2. Limit the time for use to less than 10 minutes for children, the elderly or the physically impaired to allow users to familiarize with the Product. Progressively prolong the time for use.
3. Although soaps or bath/shower gels may be used before or after the Bubble Spa, do not use with the product. If you have sensitive skin or suffer atopy, experience the effects of the product without any soap or bath/shower gels
4. Please consult with a physician before use if you suffer from heart disease, or abnormal blood pressure.
5. Refrain from using the product and rest if you feel over-fatigued during the Bubble Spa.
6. When air intake is insufficient, bubbles may become thinner during use. Expose the Inlet Nozzle Head to the air out of the water to idle for about 20~30 seconds. You can enjoy a more effective Bubble Spa.