User Manual - MMVaporsmmvapors.com/downloads/V2-dryad-manual.pdf · Congratulations! You are now...
Transcript of User Manual - MMVaporsmmvapors.com/downloads/V2-dryad-manual.pdf · Congratulations! You are now...
User Manualwww.mmvapors.com
Congratulations! You are now the owner of a Dryad!To ensure safety and proper usage,
please read this manual carefully and review the included diagrams.
The Dryad is designed especially for the experienced and high end vapers. The Dryad is powered by the YiHi SX350J V2 processor with Temperature
Limiting technology which provides intelligent power regulation. The Dryad is an elegant, small but extremely potent device, designed to provide a balance of power and convenience combined with pleasing aesthetics, crafted and fin-
ished to the high standards of quality that MMVapors stands for.
We feel that this combination will provide an awesome vape experience! Enjoy!
Specifications & Features
• PoweredbytheYiHiSX350JV2processor.• VariableWattage&Joule,supportsNi/Ti/SS• Newinnovativetechnology:TemperatureCoefficientofRessistance,compensatetemperatureandSXi-Qcontrolsystem(customizeyourownpreferences)
• OutputJoule:10J-75J.200-580°F/100-300°C.• Resistance:0.05-0.3ohms(Joulemode).• Singlebattery75Wregulated,85Winbypassmode(mechanicalmod).• OutputVoltage:1.0–9.5Volts.• Resistance:0.15ohm–3.0ohm(Powermode).• Tastemodes:Powerful+,Powerful,Standard,Soft,SXQ-S1toS5• Buck-Boost&Boost,DC-DCConverter.• ChargesviaUSB,takesone18650battery.• Rotarydisplay(Auto-flip),Gravitysensorsystem.• Upgradablesoftware.Graphicuserinterface.• ReversePolarity,outputshort,lowresistance,lowbatteryvoltage,overheatprotection.
How to operate• Turn On: PresstheFirebutton5timestoturnonthedevice.
• Lock & Unlock: Fromthemaininterfaceorwhenthescreenisoff,presstheFirebutton3timestolockandunlockthedevice.
• Access the Main interface: Whenthedeviceisonandunlocked,presstheFirebuttononcetoaccessthemaininterface.
• Choose the Flash Memory: 1.InthemaininterfacepressUpbuttontochoosetheflashmemoryfromM1toM5.
2.ToadjustthepowerorJoulesforM1toM5afterselectingthememorysetting,presstheDownbuttonFIRSTandthenusetheUpandDownbuttonstoadjusttheWattageorJoules.
3.IfyouwanttochooseadifferentpowermodeimmediatelyafteradjustingtheWattageinyourcurrentmemorysetting,presstheFirebuttononcethenpressthedownbuttontoscrollthroughthepowermodes.
• Choose the taste Modes: FromthemaininterfacepresstheDownbuttontochoosethetastemodes(Powerful+,Powerful,Standard,Softmode&SXQS1toS5).
Enter the Main Menu: EntertheMainMenubypressingtheFirebutton5times.UsetheFirebuttontoadvancetoeachsettingasshowninthediagrams.EachsettingcanbeadjustedusingeitherthegravitytiltortheUp/Downbuttons.
Unlock the device
Lock the device
Novice mode, Only allowing vaping & adjusting the power
Advanced mode,All functions available
The main interface (Joule mode)
Adjust the temperature
Choose Celcius or Fahrenheit
The main interface (power mode)
Exit the menu and enter the main interface.
Choose the wire that you are using.
Set the TCR to use other coils than Ni/Ti/SS that can support temperature control.
Direct connection mode, basically allowing your Dryad to become a mechanical mod.
Turn your device on/off
Link on when upgrading. (You can download the SXi Driver and firmwarefrom: http://mmvapors.com/all-things-dryad)Connect the device to the computer by USB cable, tilt the device to activate the Link function and then perform the upgrade.
Turn the automatic rotation of the screen on/off
Choose between Power mode or Joule mode.
Read the resistance of the Atomizer.
By compensating the temperature, you can vary the taste and the effect of TC will be more accurate.
Connect, or check the connection of the atomizer.
Output short.
Anti dry-burning warning.
The chipset is too hot.
The resistance of the atomizer is too low.
The voltage of the battery is too low.
The power of the battery is not enough for the current setting.
Precautions
• Whenswitchingtotemperaturecontrolfunctionitisimportanttocalibratethecoiltothechipset(this must be done with the coil/atomizer at room temperature!):
WiththeatomizerattachedpressandholdtheUp/Downbuttonstogether.Thechipwillreadthecoilresistanceanddisplayitonthescreen.Whenitturnsofftheatomizerandthechiparenowmatchedtoprovideaccuratetemperaturecontrol.This step must be done whenever switching to temperature mode or when a new coil is installed in temperature mode!
• Anti-dryburningtechnology.Topreventdryburning,andover-heatingthecoil&wickmaterial,theunitwillmonitorforthisconditionanddisplayawarningof“DryCoil,NoLiquid”.
• Don’tleavethedeviceinhightemperaturesordampconditions,thismaydamageit.•TheSX350JV2hasfutureupgradecapabilities.Forthelatestinformationandfirmwarepleaserefertoourwebsite.http://mmvapors.com/all-things-dryadIfyouexperienceanyproblemspleasecontactourcustomerserviceviaemail:[email protected]
PleasedownloadtheSXi-Qdriver&upgradefirmwarefromourwebsite:
http://mmvapors.com/all-things-dryad
Main interface
Install the driver andconnect to the computer.
Open the firmware file and upgrade the device.
Check details onSetting page.
Check the version No. of the chipset and the ID number.
Check details on SXi-Q page.
Customize your own logo: make changes and download the new firm-ware to your device.
Setting interface
Open File (*.sxic)
Save File (*.sxic)
Save configuration to the device
SXi-Q interface
5 different taste settings
This indicates that the device is connected. If this does not appear disconnect the device and connect again.
Clear the settings.
All things Dryad:http://mmvapors.com/all-things-dryad
Forcustomerservicecontact:[email protected]
By