GT & RS BLACK EDITIONUSER GUIDE

www.abroco.com

CONTENTS

4D ARMREST

RECLINE

ROCKING TILT

HEIGHT ADJUSTMENT

LUMBAR & NECK SUPPORT CUSHIONS

HOW TO ADJUST YOUR CHAIR TO SIT COMFORTABLY

CHAIR MAINTENANCE

3

4

5

5

6

7

7

DIMENSIONS

Lifting lever (A) on the outer side of each armrest will enable the height to be adjusted, once you find the desired position release & the height will be fixed in position.

The armrests can be positioned left, right or centrally, simply use slight force to manoeuvre in place. The mechanism inside provides enough resistance to ensure it remains fixed in place once the preferred angle is chosen.

HOW IT WORKS

The button (B) found on the inside front end, allows for the surface area to be shifted forward & back. Press & hold button to adjust & release to lock in place.

Button (C) found further back on the inside allows for the armrest surface to be shifted from right to left for width adjustment. Press & hold button to adjust & release to lock in place.

Warning: Be careful when adjusting, keep fingers clear of underside to avoid injury on moving parts.

AN ESSENTIAL COMPONENT TO OPTIMISE YOUR POSITION...

Multi directional with eight ways of adjustment.

Refined cured foam surface improving comfort & grip.

Streamline ergonomic design to find the perfect position for your arms.

A

B

C

34D ARMREST

When seated pull lever (A) & gently lean backwards. Once you have found the perfect position release the lever & the backrest will fix in place. To return to the upright position pull the lever & sit upright, the backrest will automatically return to the default position.

Warning: Be careful to recline backwards slowly to prevent any accident.

HOW IT WORKS

A

4RECLINER

DELIVERING 180 DEGREES OF RELAXATION...

90° - 180° full length recliner.

Multiple settings for work, rest & play.

Maximising comfort for long periods in the chair.

CREATE MOTION & EASE TENSION AT YOUR DESK...

90°-135° rocking tilt mechanism with multiple lock settings & tension control.

Enable rocking motion, a great way to ease tension for long sessions.

Fully height adjustable 130 -137cm.

A

5ROCKING TILT & HEIGHT ADJUSTMENT

HOW IT WORKS

Operated using two paddle levers (A,B) located on either side of the mechanism. The right hand paddle (A) is for height adjustment. Lift the paddle & either apply weight to lower, or use your feet to semi stand to increase height. Once the desired height is found release lever to lock in place.

Pushing down on the left hand paddle (B), releases the mechanism enabling the rocking function. Using your feet & body you can gently push backwards to create the rocking motion. To lock simply lift paddle (B) when the desired angle of tilt is found. The chair can be locked in various settings from 90∞-135∞. The tension of the mechanism can be controlled by using the cog found underneath the seat.

Warning: Do not use the rocking tilt with an extreme recline angle. Reclining back too far & rocking can be dangerous.

B

Both support cushions can be easily adjusted using the attached straps. Simply adjust higher or lower or uncl ip & remove a l together depending on preference.

GOOD POSTURE PREVENTS LONG TERM DAMAGE...

Improves comfort helping to maintain correct posture.

Supports your neck & back through extended sessions.

Fully adjustable & detachable.

6LUMBAR & NECK SUPPORT CUSHIONS

CHAIR MAINTENANCE

SEAT HEIGHTAdjust the height so that your feet are flat on the floor & your knees are slightly lower than your hips.

Pro Tip: adjust the chair height in combination with armrest height so that you can use the keyboard with your wrists & forearms straight (level with the floor).

4D ARMRESTSAdjust armrests height so that you can comfortably use your keyboard with your wrist & forearms straight. Customise your seating position further using: left / right, forward / backward, width inside / outside to fully benefit from this feature & optimise your position.

BACKREST & RECLINEWhen gaming or working at your desk, aim to sit in the upright position to maintain good posture & support your spine. To ease tension you can recline back slightly or lay back completely flat to rest.

Pro Tip: for the ultimate seating experience combine the recline setting with rocking function & lumbar support.

Warning: Be careful to recline backwards slowly to prevent any accident.

LUMBAR & NECK SUPPORTAdjust the height of lumbar & neck cushions to support your lower back & head. Promoting good posture, the support cushions help to reduce the temptation to slouch forwards when sitting for long periods.

MULTI SETTING ROCKING TILTUse rocking function whilst maintaining an upright seating position. Gently rock to ease tension or in combination with the recline feature when looking to take a break & relax. Use multi setting lock function to customise tilt angle. Enable rocking function, lean back & lock at your desired angle. Use the tension control cog under the seat to adjust the amount of tension on the mechanism. This will adjust the amount of resistance / weight required to rock back & forth.

Warning: Do not use the rocking tilt with an extreme recline angle. Reclining back too far & rocking can be dangerous.

In order to fully benefit from ATOM's ergonomic features its important you adjust your seating position correctly.

CLEANINGAvoid using any chemicals as this may damage the PU leather. Use a damp cloth to remove dirt & stains.

Pro Tip: Periodically checking & tightening all bolts that connect the backrest, armrests & mechanism will maintain the chairs structural integrity, preventing noise associated with loose fittings.

7HOW TO ADJUST YOUR CHAIR

www.abroco.com