USED WORLD WIDE
5
WINCHES WWW.CROFTTRUCKSA.COM CALL 210-227-5187 WWW.CROFTHITCH.COM 1503 N. BRAZOS WWW.CROFTTRUCKEQUIP.COM SAN ANTONO TEXAS 78207 Hydraulic Winches Continuous duty cycle, smooth operation, and submersible operation are among the many benefits of a Mile Marker power steering driven Hydraulic Winch. As the primary outfit for the U.S Army’s HMMWV, rely on this legendary tool to lead your rig through your very own battlegrounds. ABUSED WORLD WIDE ric Winches Required with HI Series Hydraulic Winch Part # Applications 35-5020-15 GM, Dodge, International 35-5020-07 Ford, up to 1997 35-5020-34 Ford - 1997 and up 35-5020-51 Jeep 35-5020-31 Nissan 35-5020-41 Toyota 35-5020-45 Landrover 35-5020-17 AM General - Hummer VEHICLE ADAPTER KIT Required with HI Series Hydraulic Winch Specifications Part Number 75-50085C Rated Line Pull 9,000 lbs.@1500 PSI (4,090 kgs.) Gear Train Planetary Gear Ratio 6:1 (low gear) 1:1 (high gear) Motor 14 C.I. Hydraulic Directional Control 12V Solenoid 3 way Valve Integrated (maximum rated flow 3.5 gpm) draws 2 amps Control Switch Remote Switch, 12’ lead Hoses 2 hoses (5’ and 7’) Steel Braid High Pressure, 3,000 PSI rating. Use size 6 JIC swivel female on both ends. Cable 3/8” x 100’ (14,400 nominal) Drum Size Diameter 2.5” (6.4cm) Drum Size Length 9” (23cm) Total Shipping Weight 103 lbs. 9,000 POUND HYDRAULIC Freespooling • Power IN/OUT • Mechanical Lock Sealed against the elements • Can use underwater Corrosion resistant • Stainless Steel Tie Bars and Fasteners Reversible Mounting • 2 Speed FEATURES Specifications Part Number 75-50050C Rated Line Pull 10,500 lbs.@1500 PSI (single line) (4,770 kgs.) Gear Train Planetary Gear Ratio 6:1 (low gear) 1:1 (high gear) Motor 17.9 C.I. Hydraulic Directional Control 12V Solenoid 3 way Valve Integrated (maximum rated flow 3.5 gpm) draws 2 amps Control Switch Remote Switch, 12’ lead Hoses 2 hoses (5’ and 7’) Steel Braid High Pressure, 3,000 PSI rating. Use size 6 JIC swivel female on both ends. Cable 3/8” x 100’ (14,400 nominal) Drum Size Diameter 2.5” (6.4cm) Drum Size Length 9” (23cm) Total Shipping Weight 103 lbs. 10,500 POUND HYDRAULIC Freespooling • Power IN/OUT • Mechanical Lock Sealed against the elements • Can use underwater Corrosion resistant • Stainless Steel Tie Bars and Fasteners Reversible Mounting • 2 Speed FEATURES Freespooling • Power IN/OUT • Mechanical Lock Sealed against the elements • Can use underwater Corrosion resistant • Stainless Steel Tie Bars and Fasteners Reversible Mounting • 2 Speed • Reversible Mounting FEATURES Specifications Part Number 75-52000C Rated Line Pull 12,000 lbs.@1500 PSI (single line) (5,454 kgs.) Gear Train Planetary Gear Ratio 6:1 (low gear) 1:1 (high gear) Motor 18.7 C.I. Hydraulic Directional Control 12V Solenoid 3 way Valve Integrated (maximum rated flow 3.5 gpm) draws 2 amps Control Switch Remote Switch, 12’ lead Hoses 2 hoses (5’ and 7’) Steel Braid High Pressure, 3,000 PSI rating. Use size 6 JIC swivel female on both ends. Cable 3/8” x 100’ (14,400 nominal) Drum Size Diameter 2.5” (6.4cm) Drum Size Length 9” (23cm) Total Shipping Weight 110 lbs. 12,000 POUND HYDRAULIC HEAVY DUTY SNATCH BLOCK & SHACKLE RECOVERY/TREE STRAP REPLACEMENT CABLE & HOOK ROLLER FAIRLEAD COVER NEOPRENE WINCH COVER WINCH ACCESSORY KIT ACCESSORIES
-
Upload
croft-supply-and-distribution -
Category
Documents
-
view
221 -
download
0
description
WWW.CROFTTRUCKSA.COM CALL 210-227-5187 WWW.CROFTHITCH.COM 1503 N. BRAZOS WWW.CROFTTRUCKEQUIP.COM SAN ANTONO TEXAS 78207 8000 POUND RECOVERY WINCH FEATURES PEC8 NEW DESIGN, Clockable Clutch, Planetary Gear- 2500 POUND ATV/UTILITY WINCH FEATURES PE2500 Planetary Gearing, Dynamic Braking, Both 12’ Hand able 1 2 3 4 -low gear (FPM) 6.16 7.48 8.8 10.5 (lbs.) 9,000 7,300 6,200 5,400 -high gear (FPM) 33.6 38.4 48 57 (lbs.) 1,500 1,200 1,000 900
Transcript of USED WORLD WIDE
WINCHES
WWW.CROFTTRUCKSA.COM CALL 210-227-5187WWW.CROFTHITCH.COM 1503 N. BRAZOSWWW.CROFTTRUCKEQUIP.COM SAN ANTONO TEXAS 78207
ABUSED WORLD WIDE ABUSED WORLD WIDE
Electric Winches Hydraulic Winches
FEATURES HI9000 SPECIFICATIONS HI9000
PERFORMANCE HI9000
FreespoolingMechanical lockSealed against the elementsCan use underwaterCorrosion resistantStainless steel tie bars and fasteners2 speedpower in & power out
Part Number 75-50085C
Rated line pull 9,000 lbs.@1500 PSI (4,090 kgs.)
Gear Train PlanetaryGear Ratio 6:1 (low gear)1:1(high gear) Motor 14 C.I. HydraulicDirectional Control 12V Solenoid, 3 wayValve Integrated (max flow 3.5 gpm) 2 ampsControl Pendant 12’ Wired Remote
Hoses5’ & 6.5’: steel braid, high pres-sure, 3k PSI, Uses size 6 JIC swivels on both ends
Cable 3/8” x 100’ (14,400 lbs. nominal)Drum Size: 2.5” (6.4 cm)/9” (23cm)Total shipping weight 103 lbs. (46.7 kg)Bolt Pattern 10” x 4.5” (4 bolts, 3/8”)
3.5 GPM @ 1500 PSILayer of Cable 1 2 3 4Line speed-low gear (FPM) 6.16 7.48 8.8 10.5Rated pull (lbs.) 9,000 7,300 6,200 5,400Line speed-high gear (FPM) 33.6 38.4 48 57Rated pull (lbs.) 1,500 1,200 1,000 900
9,000 POUND HYDRAULIC
FEATURES HI10500 SPECIFICATIONS HI10500
PERFORMANCE HI10500
FreespoolingMechanical lockSealed against the elementsCan use underwaterCorrosion resistantStainless steel tie bars and fasteners2 speedpower in & power out
3.5 GPM @ 1500 PSILayer of Cable 1 2 3 4Line speed-low gear (FPM) 5.65 6.43 7.41 8.58Rated pull (lbs.) 10,500 8,500 7,400 6,400Line speed-high gear (FPM) 31 36 42 48Rated pull (lbs.) 1,600 1,300 1,200 1,000
Part Number 75-50050CRated line pull 10,500 lbs.@1500 PSI (4,770 kgs.) Gear Train PlanetaryGear Ratio 6:1 (low gear)1:1(high gear) Motor 17.9 C.I. HydraulicDirectional Control 12V Solenoid, 3 wayValve Integrated (max flow 3.5 gpm) 2 ampsControl Pendant 12’ Wired Remote
Hoses5’ & 6.5’: steel braid, high pres-sure, 3k PSI, Uses size 6 JIC swivels on both ends
Cable 3/8” x 100’ (14,400 lbs. nominal)Drum Size: 2.5” (6.4 cm)/9” (23cm)Total shipping weight 103 lbs. (46.7 kg)Bolt Pattern 10” x 4.5” (4 bolts, 3/8”)
10,500 POUND HYDRAULIC
12,000 POUND HYDRAULICFEATURES HI12000 SPECIFICATIONS HI12000
PERFORMANCE HI12000
FreespoolingMechanical lockSealed against the elementsCan use underwaterCorrosion resistantStainless steel tie bars and fasteners2 speedpower in & power outReversible MountingDuctile Iron Body
3.5 GPM @ 1500 PSILayer of Cable 1 2 3 4Line speed-low gear (FPM) 5.65 6.43 7.41 8.58Rated pull (lbs.) 12,000 9,400 8,200 7,000Line speed-high gear (FPM) 31 36 42 48Rated pull (lbs.) 2,000 1,550 1,350 1,150
Part Number 75-52000CRated line pull 12,000 lbs.@1500 PSI (5,454 kgs.) Gear Train PlanetaryGear Ratio 6:1 (low gear)1:1(high gear) Motor 18.7 C.I. HydraulicDirectional Control 12V Solenoid, 3 wayValve Integrated (max flow 7 gpm) 2 ampsControl Pendant 12’ Wired Remote
Hoses5’ & 6.5’: steel braid, high pres-sure, 3k PSI, Uses size 6 JIC swivels on both ends
Cable 3/8” x 100’ (14,400 lbs. nominal)Drum Size: 2.5” (6.4 cm)/9” (23cm)Total shipping weight 110 lbs. (49.9 kg)Bolt Pattern 10” x 4.5”
(4 bolts, 3/8”)
VEHICLE ADAPTER KIT
Required with HI Series Hydraulic Winch
To be used to adapt power steer-ing pump to HI Series Winch System. See Chart for Specific
Vehicle Application.
PART NUMBER: APPLICATION:
35-5020-15GM, Dodge, Int’l,
Chevrolet, H2
35-5020-222003 & up
Durango
35-5020-07 Ford, up to 1998
35-5020-34Ford 1999 to 04;
F-150 1997 to 04
35-5020-10Ford SportTrac
& Ranger
35-5020-51 Jeep
35-5020-31 Nissan
35-5020-41 Toyota
35-5020-45 Land Rover
35-5020-17AM General:
Hummer H1
35-5020-352005 and up
Ford Super Duty
35-5020-362007 Ford
F-550 Only
35-5020-81 Chevy 5500
Mile Marker electric winches offer superior pulling power while maintaining a low elec-tric current. From the potency of a perma-nent magnet ATV winch, to the durability of a series wound Truck recovery system, Mile Marker has got you covered. Discover why Mile Marker winches are proud to be Abused World Wide.™
Hydraulic WinchesContinuous duty cycle, smooth operation, and submersible operation are among the many benefits of a Mile Marker power steering driven Hydraulic Winch. As the primary outfit for the U.S Army’s HMMWV, rely on this legendary tool to lead your rig through your very own battlegrounds.
2500 POUND ATV/UTILITY WINCH FEATURES PE2500 Planetary Gearing, Dynamic Braking, Both 12’ Hand Control and Handlebar Remote, Heavy Duty Permanent Magnet Motor, Free Spooling and Power In and Power Out Marker has got you
PERFORMANCE PE2500 Line Pull Line Speed Motor
Part Number 76-50105Rated line pull 2500 lbs. (1134 kg) Gear Train PlanetaryGear Ratio 153:1Motor .9 hp Perm Magnet (.7kw ), 12 volt
Control Pendant Illuminated 2-Button & Handlebar switch
Dimensions (LxWxH) 13” x 5” x 5” (330mm x 127mm x 127mm)
Cable 3/16” x 50’(4200 nominal)(4.76 MM X 15.2 M)
Drum Size: 2” (50 mm) x 2.95” (75 mm)
Net weight 24 lbs. (11.8 kg)Bolt Pattern 3” x 4.87”
(76.2 mm x 124 mm)
SPECIFICATIONS PE2500
lbs. kgs. fpm mpm amps@12v0 0 19.1 5.8 12
500 227 15.3 4.7 311000 454 12.8 3.9 621500 680 9 2.7 902000 907 6.4 2 1142500 1134 4.5 1.4 154
WINCH ACCESSORIES:
8000 POUND RECOVERY WINCH FEATURES PEC8 NEW DESIGN, Clockable Clutch, Planetary Gear-ing, Automatic Load Holding Brake, Illuminated Controls, Heavy Duty Permanent Magnet Motor, Free Spooling, Power In and Power Out, Galvanized Roller Fairlead, FRP Sheathing on all Cables, 100’ of 5/16” Aircraft Cable.Marker has got you covered. Dis-
PERFORMANCE PEC8lbs. kgs. fpm mpm amps@12v0 0 13 3.9 35
2000 907 11 3.3 1004000 1814 9 2.7 1806000 2722 6 1.8 2308000 3629 5 1.5 300
Line Pull Line Speed Motor
Part Number 77-50140Rated line pull 8,000 LBS (3,629 KG) Gear Train 3 Stage PlanetaryGear Ratio 210:1Motor 4.1 HP Perm. Magnet (3 KW) 12V DCControl Pendant Illuminated 2-Button
Dimensions (LxWxH) 21” X 6.22” X 8.25” (533MM X 158 MM X 209.5 MM)
Cable 5/16” x 100’(9,800 nominal)(7.94 MM X 30.5M)
Drum Size: 2.5” (6.4 cm)/9” (23cm)Net weight 80 lbs. (36 kg)Bolt Pattern 10” x 4.5” (254MM X 114MM)
(4 bolts, 3/8”)
SPECIFICATIONS PEC8
INTEGRATED WINCH SERIES PERFORMANCE SI12000lbs. kgs. fpm mpm amps@12v0 0 23 7 90
2000 907 12.8 3.9 1454000 1814 9.7 2.9 1856000 2722 7.9 2.4 2308000 3629 7.1 2.1 27010000 4536 5.1 1.6 31512000 5443 4.5 1.4 315
lbs. kgs. fpm mpm amps@12v0 0 25.7 7.8 90
2000 907 15.1 4.6 1504000 1814 10.5 3.2 2106000 2722 7.9 2.4 2708000 3629 5.9 1.8 3209500 4309 4.3 1.3 375
Line Pull Line Speed Motor Part Number 76-50152 (SI12000) 76-50147 (SI95000) Rated line pull 12,000 LBS (5,443 KG) & 9,500 lbs (4309 kg) Gear Train 3 Stage PlanetaryGear Ratio SI12000: 296:1 SI9500: 212:1Motor 4.8 HP Series Wound(3.6 KW) 12V DCControl Pendant Illuminated 2-Button
Dimensions (LxWxH) 21.6” X 6.6” X 10” (548mm X 160 MM X 254 MM)
Cable 3/8” x 100’(14,400 nominal)(9.53 MM X 30.5M)
Drum Size: 2.5” (6.4 cm)/9” (23cm)Net weight 93 lbs. (42 kg)Bolt Pattern 10” x 4.5” (254MM X 114MM)
(4 bolts, 3/8”)
SPECIFICATIONS SI SERIES
PERFORMANCE SI9500
ACCESSORY KIT PN: 19-0000-1
NEOPRENE COVER PN: 8503 OR 8504PN 8503: Fits Hydraulic WinchesPN 8504: Fits Electric Winches 6,000 pounds and Greater
ABUSED WORLD WIDE ABUSED WORLD WIDE
Electric Winches Hydraulic Winches
FEATURES HI9000 SPECIFICATIONS HI9000
PERFORMANCE HI9000
FreespoolingMechanical lockSealed against the elementsCan use underwaterCorrosion resistantStainless steel tie bars and fasteners2 speedpower in & power out
Part Number 75-50085C
Rated line pull 9,000 lbs.@1500 PSI (4,090 kgs.)
Gear Train PlanetaryGear Ratio 6:1 (low gear)1:1(high gear) Motor 14 C.I. HydraulicDirectional Control 12V Solenoid, 3 wayValve Integrated (max flow 3.5 gpm) 2 ampsControl Pendant 12’ Wired Remote
Hoses5’ & 6.5’: steel braid, high pres-sure, 3k PSI, Uses size 6 JIC swivels on both ends
Cable 3/8” x 100’ (14,400 lbs. nominal)Drum Size: 2.5” (6.4 cm)/9” (23cm)Total shipping weight 103 lbs. (46.7 kg)Bolt Pattern 10” x 4.5” (4 bolts, 3/8”)
3.5 GPM @ 1500 PSILayer of Cable 1 2 3 4Line speed-low gear (FPM) 6.16 7.48 8.8 10.5Rated pull (lbs.) 9,000 7,300 6,200 5,400Line speed-high gear (FPM) 33.6 38.4 48 57Rated pull (lbs.) 1,500 1,200 1,000 900
9,000 POUND HYDRAULIC
FEATURES HI10500 SPECIFICATIONS HI10500
PERFORMANCE HI10500
FreespoolingMechanical lockSealed against the elementsCan use underwaterCorrosion resistantStainless steel tie bars and fasteners2 speedpower in & power out
3.5 GPM @ 1500 PSILayer of Cable 1 2 3 4Line speed-low gear (FPM) 5.65 6.43 7.41 8.58Rated pull (lbs.) 10,500 8,500 7,400 6,400Line speed-high gear (FPM) 31 36 42 48Rated pull (lbs.) 1,600 1,300 1,200 1,000
Part Number 75-50050CRated line pull 10,500 lbs.@1500 PSI (4,770 kgs.) Gear Train PlanetaryGear Ratio 6:1 (low gear)1:1(high gear) Motor 17.9 C.I. HydraulicDirectional Control 12V Solenoid, 3 wayValve Integrated (max flow 3.5 gpm) 2 ampsControl Pendant 12’ Wired Remote
Hoses5’ & 6.5’: steel braid, high pres-sure, 3k PSI, Uses size 6 JIC swivels on both ends
Cable 3/8” x 100’ (14,400 lbs. nominal)Drum Size: 2.5” (6.4 cm)/9” (23cm)Total shipping weight 103 lbs. (46.7 kg)Bolt Pattern 10” x 4.5” (4 bolts, 3/8”)
10,500 POUND HYDRAULIC
12,000 POUND HYDRAULICFEATURES HI12000 SPECIFICATIONS HI12000
PERFORMANCE HI12000
FreespoolingMechanical lockSealed against the elementsCan use underwaterCorrosion resistantStainless steel tie bars and fasteners2 speedpower in & power outReversible MountingDuctile Iron Body
3.5 GPM @ 1500 PSILayer of Cable 1 2 3 4Line speed-low gear (FPM) 5.65 6.43 7.41 8.58Rated pull (lbs.) 12,000 9,400 8,200 7,000Line speed-high gear (FPM) 31 36 42 48Rated pull (lbs.) 2,000 1,550 1,350 1,150
Part Number 75-52000CRated line pull 12,000 lbs.@1500 PSI (5,454 kgs.) Gear Train PlanetaryGear Ratio 6:1 (low gear)1:1(high gear) Motor 18.7 C.I. HydraulicDirectional Control 12V Solenoid, 3 wayValve Integrated (max flow 7 gpm) 2 ampsControl Pendant 12’ Wired Remote
Hoses5’ & 6.5’: steel braid, high pres-sure, 3k PSI, Uses size 6 JIC swivels on both ends
Cable 3/8” x 100’ (14,400 lbs. nominal)Drum Size: 2.5” (6.4 cm)/9” (23cm)Total shipping weight 110 lbs. (49.9 kg)Bolt Pattern 10” x 4.5”
(4 bolts, 3/8”)
VEHICLE ADAPTER KIT
Required with HI Series Hydraulic Winch
To be used to adapt power steer-ing pump to HI Series Winch System. See Chart for Specific
Vehicle Application.
PART NUMBER: APPLICATION:
35-5020-15GM, Dodge, Int’l,
Chevrolet, H2
35-5020-222003 & up
Durango
35-5020-07 Ford, up to 1998
35-5020-34Ford 1999 to 04;
F-150 1997 to 04
35-5020-10Ford SportTrac
& Ranger
35-5020-51 Jeep
35-5020-31 Nissan
35-5020-41 Toyota
35-5020-45 Land Rover
35-5020-17AM General:
Hummer H1
35-5020-352005 and up
Ford Super Duty
35-5020-362007 Ford
F-550 Only
35-5020-81 Chevy 5500
Mile Marker electric winches offer superior pulling power while maintaining a low elec-tric current. From the potency of a perma-nent magnet ATV winch, to the durability of a series wound Truck recovery system, Mile Marker has got you covered. Discover why Mile Marker winches are proud to be Abused World Wide.™
Hydraulic WinchesContinuous duty cycle, smooth operation, and submersible operation are among the many benefits of a Mile Marker power steering driven Hydraulic Winch. As the primary outfit for the U.S Army’s HMMWV, rely on this legendary tool to lead your rig through your very own battlegrounds.
2500 POUND ATV/UTILITY WINCH FEATURES PE2500 Planetary Gearing, Dynamic Braking, Both 12’ Hand Control and Handlebar Remote, Heavy Duty Permanent Magnet Motor, Free Spooling and Power In and Power Out Marker has got you
PERFORMANCE PE2500 Line Pull Line Speed Motor
Part Number 76-50105Rated line pull 2500 lbs. (1134 kg) Gear Train PlanetaryGear Ratio 153:1Motor .9 hp Perm Magnet (.7kw ), 12 volt
Control Pendant Illuminated 2-Button & Handlebar switch
Dimensions (LxWxH) 13” x 5” x 5” (330mm x 127mm x 127mm)
Cable 3/16” x 50’(4200 nominal)(4.76 MM X 15.2 M)
Drum Size: 2” (50 mm) x 2.95” (75 mm)
Net weight 24 lbs. (11.8 kg)Bolt Pattern 3” x 4.87”
(76.2 mm x 124 mm)
SPECIFICATIONS PE2500
lbs. kgs. fpm mpm amps@12v0 0 19.1 5.8 12
500 227 15.3 4.7 311000 454 12.8 3.9 621500 680 9 2.7 902000 907 6.4 2 1142500 1134 4.5 1.4 154
WINCH ACCESSORIES:
8000 POUND RECOVERY WINCH FEATURES PEC8 NEW DESIGN, Clockable Clutch, Planetary Gear-ing, Automatic Load Holding Brake, Illuminated Controls, Heavy Duty Permanent Magnet Motor, Free Spooling, Power In and Power Out, Galvanized Roller Fairlead, FRP Sheathing on all Cables, 100’ of 5/16” Aircraft Cable.Marker has got you covered. Dis-
PERFORMANCE PEC8lbs. kgs. fpm mpm amps@12v0 0 13 3.9 35
2000 907 11 3.3 1004000 1814 9 2.7 1806000 2722 6 1.8 2308000 3629 5 1.5 300
Line Pull Line Speed Motor
Part Number 77-50140Rated line pull 8,000 LBS (3,629 KG) Gear Train 3 Stage PlanetaryGear Ratio 210:1Motor 4.1 HP Perm. Magnet (3 KW) 12V DCControl Pendant Illuminated 2-Button
Dimensions (LxWxH) 21” X 6.22” X 8.25” (533MM X 158 MM X 209.5 MM)
Cable 5/16” x 100’(9,800 nominal)(7.94 MM X 30.5M)
Drum Size: 2.5” (6.4 cm)/9” (23cm)Net weight 80 lbs. (36 kg)Bolt Pattern 10” x 4.5” (254MM X 114MM)
(4 bolts, 3/8”)
SPECIFICATIONS PEC8
INTEGRATED WINCH SERIES PERFORMANCE SI12000lbs. kgs. fpm mpm amps@12v0 0 23 7 90
2000 907 12.8 3.9 1454000 1814 9.7 2.9 1856000 2722 7.9 2.4 2308000 3629 7.1 2.1 27010000 4536 5.1 1.6 31512000 5443 4.5 1.4 315
lbs. kgs. fpm mpm amps@12v0 0 25.7 7.8 90
2000 907 15.1 4.6 1504000 1814 10.5 3.2 2106000 2722 7.9 2.4 2708000 3629 5.9 1.8 3209500 4309 4.3 1.3 375
Line Pull Line Speed Motor Part Number 76-50152 (SI12000) 76-50147 (SI95000) Rated line pull 12,000 LBS (5,443 KG) & 9,500 lbs (4309 kg) Gear Train 3 Stage PlanetaryGear Ratio SI12000: 296:1 SI9500: 212:1Motor 4.8 HP Series Wound(3.6 KW) 12V DCControl Pendant Illuminated 2-Button
Dimensions (LxWxH) 21.6” X 6.6” X 10” (548mm X 160 MM X 254 MM)
Cable 3/8” x 100’(14,400 nominal)(9.53 MM X 30.5M)
Drum Size: 2.5” (6.4 cm)/9” (23cm)Net weight 93 lbs. (42 kg)Bolt Pattern 10” x 4.5” (254MM X 114MM)
(4 bolts, 3/8”)
SPECIFICATIONS SI SERIES
PERFORMANCE SI9500
ACCESSORY KIT PN: 19-0000-1
NEOPRENE COVER PN: 8503 OR 8504PN 8503: Fits Hydraulic WinchesPN 8504: Fits Electric Winches 6,000 pounds and Greater
ABUSED WORLD WIDE ABUSED WORLD WIDE
Electric Winches Hydraulic Winches
FEATURES HI9000 SPECIFICATIONS HI9000
PERFORMANCE HI9000
FreespoolingMechanical lockSealed against the elementsCan use underwaterCorrosion resistantStainless steel tie bars and fasteners2 speedpower in & power out
Part Number 75-50085C
Rated line pull 9,000 lbs.@1500 PSI (4,090 kgs.)
Gear Train PlanetaryGear Ratio 6:1 (low gear)1:1(high gear) Motor 14 C.I. HydraulicDirectional Control 12V Solenoid, 3 wayValve Integrated (max flow 3.5 gpm) 2 ampsControl Pendant 12’ Wired Remote
Hoses5’ & 6.5’: steel braid, high pres-sure, 3k PSI, Uses size 6 JIC swivels on both ends
Cable 3/8” x 100’ (14,400 lbs. nominal)Drum Size: 2.5” (6.4 cm)/9” (23cm)Total shipping weight 103 lbs. (46.7 kg)Bolt Pattern 10” x 4.5” (4 bolts, 3/8”)
3.5 GPM @ 1500 PSILayer of Cable 1 2 3 4Line speed-low gear (FPM) 6.16 7.48 8.8 10.5Rated pull (lbs.) 9,000 7,300 6,200 5,400Line speed-high gear (FPM) 33.6 38.4 48 57Rated pull (lbs.) 1,500 1,200 1,000 900
9,000 POUND HYDRAULIC
FEATURES HI10500 SPECIFICATIONS HI10500
PERFORMANCE HI10500
FreespoolingMechanical lockSealed against the elementsCan use underwaterCorrosion resistantStainless steel tie bars and fasteners2 speedpower in & power out
3.5 GPM @ 1500 PSILayer of Cable 1 2 3 4Line speed-low gear (FPM) 5.65 6.43 7.41 8.58Rated pull (lbs.) 10,500 8,500 7,400 6,400Line speed-high gear (FPM) 31 36 42 48Rated pull (lbs.) 1,600 1,300 1,200 1,000
Part Number 75-50050CRated line pull 10,500 lbs.@1500 PSI (4,770 kgs.) Gear Train PlanetaryGear Ratio 6:1 (low gear)1:1(high gear) Motor 17.9 C.I. HydraulicDirectional Control 12V Solenoid, 3 wayValve Integrated (max flow 3.5 gpm) 2 ampsControl Pendant 12’ Wired Remote
Hoses5’ & 6.5’: steel braid, high pres-sure, 3k PSI, Uses size 6 JIC swivels on both ends
Cable 3/8” x 100’ (14,400 lbs. nominal)Drum Size: 2.5” (6.4 cm)/9” (23cm)Total shipping weight 103 lbs. (46.7 kg)Bolt Pattern 10” x 4.5” (4 bolts, 3/8”)
10,500 POUND HYDRAULIC
12,000 POUND HYDRAULICFEATURES HI12000 SPECIFICATIONS HI12000
PERFORMANCE HI12000
FreespoolingMechanical lockSealed against the elementsCan use underwaterCorrosion resistantStainless steel tie bars and fasteners2 speedpower in & power outReversible MountingDuctile Iron Body
3.5 GPM @ 1500 PSILayer of Cable 1 2 3 4Line speed-low gear (FPM) 5.65 6.43 7.41 8.58Rated pull (lbs.) 12,000 9,400 8,200 7,000Line speed-high gear (FPM) 31 36 42 48Rated pull (lbs.) 2,000 1,550 1,350 1,150
Part Number 75-52000CRated line pull 12,000 lbs.@1500 PSI (5,454 kgs.) Gear Train PlanetaryGear Ratio 6:1 (low gear)1:1(high gear) Motor 18.7 C.I. HydraulicDirectional Control 12V Solenoid, 3 wayValve Integrated (max flow 7 gpm) 2 ampsControl Pendant 12’ Wired Remote
Hoses5’ & 6.5’: steel braid, high pres-sure, 3k PSI, Uses size 6 JIC swivels on both ends
Cable 3/8” x 100’ (14,400 lbs. nominal)Drum Size: 2.5” (6.4 cm)/9” (23cm)Total shipping weight 110 lbs. (49.9 kg)Bolt Pattern 10” x 4.5”
(4 bolts, 3/8”)
VEHICLE ADAPTER KIT
Required with HI Series Hydraulic Winch
To be used to adapt power steer-ing pump to HI Series Winch System. See Chart for Specific
Vehicle Application.
PART NUMBER: APPLICATION:
35-5020-15GM, Dodge, Int’l,
Chevrolet, H2
35-5020-222003 & up
Durango
35-5020-07 Ford, up to 1998
35-5020-34Ford 1999 to 04;
F-150 1997 to 04
35-5020-10Ford SportTrac
& Ranger
35-5020-51 Jeep
35-5020-31 Nissan
35-5020-41 Toyota
35-5020-45 Land Rover
35-5020-17AM General:
Hummer H1
35-5020-352005 and up
Ford Super Duty
35-5020-362007 Ford
F-550 Only
35-5020-81 Chevy 5500
Mile Marker electric winches offer superior pulling power while maintaining a low elec-tric current. From the potency of a perma-nent magnet ATV winch, to the durability of a series wound Truck recovery system, Mile Marker has got you covered. Discover why Mile Marker winches are proud to be Abused World Wide.™
Hydraulic WinchesContinuous duty cycle, smooth operation, and submersible operation are among the many benefits of a Mile Marker power steering driven Hydraulic Winch. As the primary outfit for the U.S Army’s HMMWV, rely on this legendary tool to lead your rig through your very own battlegrounds.
2500 POUND ATV/UTILITY WINCH FEATURES PE2500 Planetary Gearing, Dynamic Braking, Both 12’ Hand Control and Handlebar Remote, Heavy Duty Permanent Magnet Motor, Free Spooling and Power In and Power Out Marker has got you
PERFORMANCE PE2500 Line Pull Line Speed Motor
Part Number 76-50105Rated line pull 2500 lbs. (1134 kg) Gear Train PlanetaryGear Ratio 153:1Motor .9 hp Perm Magnet (.7kw ), 12 volt
Control Pendant Illuminated 2-Button & Handlebar switch
Dimensions (LxWxH) 13” x 5” x 5” (330mm x 127mm x 127mm)
Cable 3/16” x 50’(4200 nominal)(4.76 MM X 15.2 M)
Drum Size: 2” (50 mm) x 2.95” (75 mm)
Net weight 24 lbs. (11.8 kg)Bolt Pattern 3” x 4.87”
(76.2 mm x 124 mm)
SPECIFICATIONS PE2500
lbs. kgs. fpm mpm amps@12v0 0 19.1 5.8 12
500 227 15.3 4.7 311000 454 12.8 3.9 621500 680 9 2.7 902000 907 6.4 2 1142500 1134 4.5 1.4 154
WINCH ACCESSORIES:
8000 POUND RECOVERY WINCH FEATURES PEC8 NEW DESIGN, Clockable Clutch, Planetary Gear-ing, Automatic Load Holding Brake, Illuminated Controls, Heavy Duty Permanent Magnet Motor, Free Spooling, Power In and Power Out, Galvanized Roller Fairlead, FRP Sheathing on all Cables, 100’ of 5/16” Aircraft Cable.Marker has got you covered. Dis-
PERFORMANCE PEC8lbs. kgs. fpm mpm amps@12v0 0 13 3.9 35
2000 907 11 3.3 1004000 1814 9 2.7 1806000 2722 6 1.8 2308000 3629 5 1.5 300
Line Pull Line Speed Motor
Part Number 77-50140Rated line pull 8,000 LBS (3,629 KG) Gear Train 3 Stage PlanetaryGear Ratio 210:1Motor 4.1 HP Perm. Magnet (3 KW) 12V DCControl Pendant Illuminated 2-Button
Dimensions (LxWxH) 21” X 6.22” X 8.25” (533MM X 158 MM X 209.5 MM)
Cable 5/16” x 100’(9,800 nominal)(7.94 MM X 30.5M)
Drum Size: 2.5” (6.4 cm)/9” (23cm)Net weight 80 lbs. (36 kg)Bolt Pattern 10” x 4.5” (254MM X 114MM)
(4 bolts, 3/8”)
SPECIFICATIONS PEC8
INTEGRATED WINCH SERIES PERFORMANCE SI12000lbs. kgs. fpm mpm amps@12v0 0 23 7 90
2000 907 12.8 3.9 1454000 1814 9.7 2.9 1856000 2722 7.9 2.4 2308000 3629 7.1 2.1 27010000 4536 5.1 1.6 31512000 5443 4.5 1.4 315
lbs. kgs. fpm mpm amps@12v0 0 25.7 7.8 90
2000 907 15.1 4.6 1504000 1814 10.5 3.2 2106000 2722 7.9 2.4 2708000 3629 5.9 1.8 3209500 4309 4.3 1.3 375
Line Pull Line Speed Motor Part Number 76-50152 (SI12000) 76-50147 (SI95000) Rated line pull 12,000 LBS (5,443 KG) & 9,500 lbs (4309 kg) Gear Train 3 Stage PlanetaryGear Ratio SI12000: 296:1 SI9500: 212:1Motor 4.8 HP Series Wound(3.6 KW) 12V DCControl Pendant Illuminated 2-Button
Dimensions (LxWxH) 21.6” X 6.6” X 10” (548mm X 160 MM X 254 MM)
Cable 3/8” x 100’(14,400 nominal)(9.53 MM X 30.5M)
Drum Size: 2.5” (6.4 cm)/9” (23cm)Net weight 93 lbs. (42 kg)Bolt Pattern 10” x 4.5” (254MM X 114MM)
(4 bolts, 3/8”)
SPECIFICATIONS SI SERIES
PERFORMANCE SI9500
ACCESSORY KIT PN: 19-0000-1
NEOPRENE COVER PN: 8503 OR 8504PN 8503: Fits Hydraulic WinchesPN 8504: Fits Electric Winches 6,000 pounds and Greater
Part # Applications35-5020-15 GM, Dodge, International35-5020-07 Ford, up to 199735-5020-34 Ford - 1997 and up35-5020-51 Jeep35-5020-31 Nissan35-5020-41 Toyota35-5020-45 Landrover35-5020-17 AM General - Hummer
Vehicle AdApter Kit Required with HI Series Hydraulic WinchSpecificationsPart Number 75-50085CRated Line Pull 9,000 lbs.@1500 PSI (4,090 kgs.)Gear Train PlanetaryGear Ratio 6:1 (low gear) 1:1 (high gear)Motor 14 C.I. HydraulicDirectional Control 12V Solenoid 3 wayValve Integrated (maximum rated flow 3.5 gpm)
draws 2 ampsControl Switch Remote Switch, 12’ leadHoses 2 hoses (5’ and 7’) Steel Braid High Pressure,
3,000 PSI rating. Use size 6 JIC swivel female on both ends.
Cable 3/8” x 100’ (14,400 nominal)Drum Size Diameter
2.5” (6.4cm)
Drum Size Length 9” (23cm)Total Shipping Weight
103 lbs.
9,000 pOUNd hYdrAUlic
Freespooling • Power IN/OUT • Mechanical LockSealed against the elements • Can use underwater
Corrosion resistant • Stainless Steel Tie Bars and FastenersReversible Mounting • 2 Speed
FeAtUres
Specifications Part Number 75-50050CRated Line Pull 10,500 lbs.@1500 PSI(single line) (4,770 kgs.)Gear Train PlanetaryGear Ratio 6:1 (low gear)1:1 (high gear)Motor 17.9 C.I. HydraulicDirectional Control 12V Solenoid 3 wayValve Integrated (maximum rated flow 3.5 gpm) draws
2 ampsControl Switch Remote Switch, 12’ leadHoses 2 hoses (5’ and 7’) Steel Braid High Pressure, 3,000
PSI rating. Use size 6 JIC swivel female on both ends.Cable 3/8” x 100’ (14,400 nominal)Drum Size Diameter 2.5” (6.4cm)Drum Size Length 9” (23cm)Total Shipping Weight
103 lbs.
10,500 pOUNd hYdrAUlic
Freespooling • Power IN/OUT • Mechanical LockSealed against the elements • Can use underwater
Corrosion resistant • Stainless Steel Tie Bars and FastenersReversible Mounting • 2 Speed
FeAtUres
Freespooling • Power IN/OUT • Mechanical LockSealed against the elements • Can use underwater
Corrosion resistant • Stainless Steel Tie Bars and FastenersReversible Mounting • 2 Speed • Reversible Mounting
FeAtUres
SpecificationsPart Number 75-52000CRated Line Pull 12,000 lbs.@1500 PSI(single line) (5,454 kgs.)Gear Train PlanetaryGear Ratio 6:1 (low gear)1:1 (high gear)Motor 18.7 C.I. HydraulicDirectional Control 12V Solenoid 3 wayValve Integrated (maximum rated flow 3.5 gpm) draws 2 ampsControl Switch Remote Switch, 12’ leadHoses 2 hoses (5’ and 7’) Steel Braid High Pressure, 3,000 PSI
rating. Use size 6 JIC swivel female on both ends.Cable 3/8” x 100’ (14,400 nominal)Drum Size Diameter 2.5” (6.4cm)Drum Size Length 9” (23cm)Total Shipping Weight 110 lbs.
12,000 pOUNd hYdrAUlic
heAVY dUtY sNAtch BlOcK & shAcKle
recOVerY/tree strAp
replAcemeNt cABle & hOOK
rOller FAirleAd cOVer
NeOpreNe wiNch cOVer
wiNchAccessOrY
Kit
AccessOries
WINCHES
WWW.CROFTTRUCKSA.COM CALL 210-227-5187WWW.CROFTHITCH.COM 1503 N. BRAZOSWWW.CROFTTRUCKEQUIP.COM SAN ANTONO TEXAS 78207
ABUSED WORLD WIDE ABUSED WORLD WIDE
Electric Winches Hydraulic Winches
FEATURES HI9000 SPECIFICATIONS HI9000
PERFORMANCE HI9000
FreespoolingMechanical lockSealed against the elementsCan use underwaterCorrosion resistantStainless steel tie bars and fasteners2 speedpower in & power out
Part Number 75-50085C
Rated line pull 9,000 lbs.@1500 PSI (4,090 kgs.)
Gear Train PlanetaryGear Ratio 6:1 (low gear)1:1(high gear) Motor 14 C.I. HydraulicDirectional Control 12V Solenoid, 3 wayValve Integrated (max flow 3.5 gpm) 2 ampsControl Pendant 12’ Wired Remote
Hoses5’ & 6.5’: steel braid, high pres-sure, 3k PSI, Uses size 6 JIC swivels on both ends
Cable 3/8” x 100’ (14,400 lbs. nominal)Drum Size: 2.5” (6.4 cm)/9” (23cm)Total shipping weight 103 lbs. (46.7 kg)Bolt Pattern 10” x 4.5” (4 bolts, 3/8”)
3.5 GPM @ 1500 PSILayer of Cable 1 2 3 4Line speed-low gear (FPM) 6.16 7.48 8.8 10.5Rated pull (lbs.) 9,000 7,300 6,200 5,400Line speed-high gear (FPM) 33.6 38.4 48 57Rated pull (lbs.) 1,500 1,200 1,000 900
9,000 POUND HYDRAULIC
FEATURES HI10500 SPECIFICATIONS HI10500
PERFORMANCE HI10500
FreespoolingMechanical lockSealed against the elementsCan use underwaterCorrosion resistantStainless steel tie bars and fasteners2 speedpower in & power out
3.5 GPM @ 1500 PSILayer of Cable 1 2 3 4Line speed-low gear (FPM) 5.65 6.43 7.41 8.58Rated pull (lbs.) 10,500 8,500 7,400 6,400Line speed-high gear (FPM) 31 36 42 48Rated pull (lbs.) 1,600 1,300 1,200 1,000
Part Number 75-50050CRated line pull 10,500 lbs.@1500 PSI (4,770 kgs.) Gear Train PlanetaryGear Ratio 6:1 (low gear)1:1(high gear) Motor 17.9 C.I. HydraulicDirectional Control 12V Solenoid, 3 wayValve Integrated (max flow 3.5 gpm) 2 ampsControl Pendant 12’ Wired Remote
Hoses5’ & 6.5’: steel braid, high pres-sure, 3k PSI, Uses size 6 JIC swivels on both ends
Cable 3/8” x 100’ (14,400 lbs. nominal)Drum Size: 2.5” (6.4 cm)/9” (23cm)Total shipping weight 103 lbs. (46.7 kg)Bolt Pattern 10” x 4.5” (4 bolts, 3/8”)
10,500 POUND HYDRAULIC
12,000 POUND HYDRAULICFEATURES HI12000 SPECIFICATIONS HI12000
PERFORMANCE HI12000
FreespoolingMechanical lockSealed against the elementsCan use underwaterCorrosion resistantStainless steel tie bars and fasteners2 speedpower in & power outReversible MountingDuctile Iron Body
3.5 GPM @ 1500 PSILayer of Cable 1 2 3 4Line speed-low gear (FPM) 5.65 6.43 7.41 8.58Rated pull (lbs.) 12,000 9,400 8,200 7,000Line speed-high gear (FPM) 31 36 42 48Rated pull (lbs.) 2,000 1,550 1,350 1,150
Part Number 75-52000CRated line pull 12,000 lbs.@1500 PSI (5,454 kgs.) Gear Train PlanetaryGear Ratio 6:1 (low gear)1:1(high gear) Motor 18.7 C.I. HydraulicDirectional Control 12V Solenoid, 3 wayValve Integrated (max flow 7 gpm) 2 ampsControl Pendant 12’ Wired Remote
Hoses5’ & 6.5’: steel braid, high pres-sure, 3k PSI, Uses size 6 JIC swivels on both ends
Cable 3/8” x 100’ (14,400 lbs. nominal)Drum Size: 2.5” (6.4 cm)/9” (23cm)Total shipping weight 110 lbs. (49.9 kg)Bolt Pattern 10” x 4.5”
(4 bolts, 3/8”)
VEHICLE ADAPTER KIT
Required with HI Series Hydraulic Winch
To be used to adapt power steer-ing pump to HI Series Winch System. See Chart for Specific
Vehicle Application.
PART NUMBER: APPLICATION:
35-5020-15GM, Dodge, Int’l,
Chevrolet, H2
35-5020-222003 & up
Durango
35-5020-07 Ford, up to 1998
35-5020-34Ford 1999 to 04;
F-150 1997 to 04
35-5020-10Ford SportTrac
& Ranger
35-5020-51 Jeep
35-5020-31 Nissan
35-5020-41 Toyota
35-5020-45 Land Rover
35-5020-17AM General:
Hummer H1
35-5020-352005 and up
Ford Super Duty
35-5020-362007 Ford
F-550 Only
35-5020-81 Chevy 5500
Mile Marker electric winches offer superior pulling power while maintaining a low elec-tric current. From the potency of a perma-nent magnet ATV winch, to the durability of a series wound Truck recovery system, Mile Marker has got you covered. Discover why Mile Marker winches are proud to be Abused World Wide.™
Hydraulic WinchesContinuous duty cycle, smooth operation, and submersible operation are among the many benefits of a Mile Marker power steering driven Hydraulic Winch. As the primary outfit for the U.S Army’s HMMWV, rely on this legendary tool to lead your rig through your very own battlegrounds.
2500 POUND ATV/UTILITY WINCH FEATURES PE2500 Planetary Gearing, Dynamic Braking, Both 12’ Hand Control and Handlebar Remote, Heavy Duty Permanent Magnet Motor, Free Spooling and Power In and Power Out Marker has got you
PERFORMANCE PE2500 Line Pull Line Speed Motor
Part Number 76-50105Rated line pull 2500 lbs. (1134 kg) Gear Train PlanetaryGear Ratio 153:1Motor .9 hp Perm Magnet (.7kw ), 12 volt
Control Pendant Illuminated 2-Button & Handlebar switch
Dimensions (LxWxH) 13” x 5” x 5” (330mm x 127mm x 127mm)
Cable 3/16” x 50’(4200 nominal)(4.76 MM X 15.2 M)
Drum Size: 2” (50 mm) x 2.95” (75 mm)
Net weight 24 lbs. (11.8 kg)Bolt Pattern 3” x 4.87”
(76.2 mm x 124 mm)
SPECIFICATIONS PE2500
lbs. kgs. fpm mpm amps@12v0 0 19.1 5.8 12
500 227 15.3 4.7 311000 454 12.8 3.9 621500 680 9 2.7 902000 907 6.4 2 1142500 1134 4.5 1.4 154
WINCH ACCESSORIES:
8000 POUND RECOVERY WINCH FEATURES PEC8 NEW DESIGN, Clockable Clutch, Planetary Gear-ing, Automatic Load Holding Brake, Illuminated Controls, Heavy Duty Permanent Magnet Motor, Free Spooling, Power In and Power Out, Galvanized Roller Fairlead, FRP Sheathing on all Cables, 100’ of 5/16” Aircraft Cable.Marker has got you covered. Dis-
PERFORMANCE PEC8lbs. kgs. fpm mpm amps@12v0 0 13 3.9 35
2000 907 11 3.3 1004000 1814 9 2.7 1806000 2722 6 1.8 2308000 3629 5 1.5 300
Line Pull Line Speed Motor
Part Number 77-50140Rated line pull 8,000 LBS (3,629 KG) Gear Train 3 Stage PlanetaryGear Ratio 210:1Motor 4.1 HP Perm. Magnet (3 KW) 12V DCControl Pendant Illuminated 2-Button
Dimensions (LxWxH) 21” X 6.22” X 8.25” (533MM X 158 MM X 209.5 MM)
Cable 5/16” x 100’(9,800 nominal)(7.94 MM X 30.5M)
Drum Size: 2.5” (6.4 cm)/9” (23cm)Net weight 80 lbs. (36 kg)Bolt Pattern 10” x 4.5” (254MM X 114MM)
(4 bolts, 3/8”)
SPECIFICATIONS PEC8
INTEGRATED WINCH SERIES PERFORMANCE SI12000lbs. kgs. fpm mpm amps@12v0 0 23 7 90
2000 907 12.8 3.9 1454000 1814 9.7 2.9 1856000 2722 7.9 2.4 2308000 3629 7.1 2.1 27010000 4536 5.1 1.6 31512000 5443 4.5 1.4 315
lbs. kgs. fpm mpm amps@12v0 0 25.7 7.8 90
2000 907 15.1 4.6 1504000 1814 10.5 3.2 2106000 2722 7.9 2.4 2708000 3629 5.9 1.8 3209500 4309 4.3 1.3 375
Line Pull Line Speed Motor Part Number 76-50152 (SI12000) 76-50147 (SI95000) Rated line pull 12,000 LBS (5,443 KG) & 9,500 lbs (4309 kg) Gear Train 3 Stage PlanetaryGear Ratio SI12000: 296:1 SI9500: 212:1Motor 4.8 HP Series Wound(3.6 KW) 12V DCControl Pendant Illuminated 2-Button
Dimensions (LxWxH) 21.6” X 6.6” X 10” (548mm X 160 MM X 254 MM)
Cable 3/8” x 100’(14,400 nominal)(9.53 MM X 30.5M)
Drum Size: 2.5” (6.4 cm)/9” (23cm)Net weight 93 lbs. (42 kg)Bolt Pattern 10” x 4.5” (254MM X 114MM)
(4 bolts, 3/8”)
SPECIFICATIONS SI SERIES
PERFORMANCE SI9500
ACCESSORY KIT PN: 19-0000-1
NEOPRENE COVER PN: 8503 OR 8504PN 8503: Fits Hydraulic WinchesPN 8504: Fits Electric Winches 6,000 pounds and Greater
WINCHES
WWW.CROFTTRUCKSA.COM CALL 210-227-5187WWW.CROFTHITCH.COM 1503 N. BRAZOSWWW.CROFTTRUCKEQUIP.COM SAN ANTONO TEXAS 78207
ABUSED WORLD WIDE ABUSED WORLD WIDE
Electric Winches Hydraulic Winches
FEATURES HI9000 SPECIFICATIONS HI9000
PERFORMANCE HI9000
FreespoolingMechanical lockSealed against the elementsCan use underwaterCorrosion resistantStainless steel tie bars and fasteners2 speedpower in & power out
Part Number 75-50085C
Rated line pull 9,000 lbs.@1500 PSI (4,090 kgs.)
Gear Train PlanetaryGear Ratio 6:1 (low gear)1:1(high gear) Motor 14 C.I. HydraulicDirectional Control 12V Solenoid, 3 wayValve Integrated (max flow 3.5 gpm) 2 ampsControl Pendant 12’ Wired Remote
Hoses5’ & 6.5’: steel braid, high pres-sure, 3k PSI, Uses size 6 JIC swivels on both ends
Cable 3/8” x 100’ (14,400 lbs. nominal)Drum Size: 2.5” (6.4 cm)/9” (23cm)Total shipping weight 103 lbs. (46.7 kg)Bolt Pattern 10” x 4.5” (4 bolts, 3/8”)
3.5 GPM @ 1500 PSILayer of Cable 1 2 3 4Line speed-low gear (FPM) 6.16 7.48 8.8 10.5Rated pull (lbs.) 9,000 7,300 6,200 5,400Line speed-high gear (FPM) 33.6 38.4 48 57Rated pull (lbs.) 1,500 1,200 1,000 900
9,000 POUND HYDRAULIC
FEATURES HI10500 SPECIFICATIONS HI10500
PERFORMANCE HI10500
FreespoolingMechanical lockSealed against the elementsCan use underwaterCorrosion resistantStainless steel tie bars and fasteners2 speedpower in & power out
3.5 GPM @ 1500 PSILayer of Cable 1 2 3 4Line speed-low gear (FPM) 5.65 6.43 7.41 8.58Rated pull (lbs.) 10,500 8,500 7,400 6,400Line speed-high gear (FPM) 31 36 42 48Rated pull (lbs.) 1,600 1,300 1,200 1,000
Part Number 75-50050CRated line pull 10,500 lbs.@1500 PSI (4,770 kgs.) Gear Train PlanetaryGear Ratio 6:1 (low gear)1:1(high gear) Motor 17.9 C.I. HydraulicDirectional Control 12V Solenoid, 3 wayValve Integrated (max flow 3.5 gpm) 2 ampsControl Pendant 12’ Wired Remote
Hoses5’ & 6.5’: steel braid, high pres-sure, 3k PSI, Uses size 6 JIC swivels on both ends
Cable 3/8” x 100’ (14,400 lbs. nominal)Drum Size: 2.5” (6.4 cm)/9” (23cm)Total shipping weight 103 lbs. (46.7 kg)Bolt Pattern 10” x 4.5” (4 bolts, 3/8”)
10,500 POUND HYDRAULIC
12,000 POUND HYDRAULICFEATURES HI12000 SPECIFICATIONS HI12000
PERFORMANCE HI12000
FreespoolingMechanical lockSealed against the elementsCan use underwaterCorrosion resistantStainless steel tie bars and fasteners2 speedpower in & power outReversible MountingDuctile Iron Body
3.5 GPM @ 1500 PSILayer of Cable 1 2 3 4Line speed-low gear (FPM) 5.65 6.43 7.41 8.58Rated pull (lbs.) 12,000 9,400 8,200 7,000Line speed-high gear (FPM) 31 36 42 48Rated pull (lbs.) 2,000 1,550 1,350 1,150
Part Number 75-52000CRated line pull 12,000 lbs.@1500 PSI (5,454 kgs.) Gear Train PlanetaryGear Ratio 6:1 (low gear)1:1(high gear) Motor 18.7 C.I. HydraulicDirectional Control 12V Solenoid, 3 wayValve Integrated (max flow 7 gpm) 2 ampsControl Pendant 12’ Wired Remote
Hoses5’ & 6.5’: steel braid, high pres-sure, 3k PSI, Uses size 6 JIC swivels on both ends
Cable 3/8” x 100’ (14,400 lbs. nominal)Drum Size: 2.5” (6.4 cm)/9” (23cm)Total shipping weight 110 lbs. (49.9 kg)Bolt Pattern 10” x 4.5”
(4 bolts, 3/8”)
VEHICLE ADAPTER KIT
Required with HI Series Hydraulic Winch
To be used to adapt power steer-ing pump to HI Series Winch System. See Chart for Specific
Vehicle Application.
PART NUMBER: APPLICATION:
35-5020-15GM, Dodge, Int’l,
Chevrolet, H2
35-5020-222003 & up
Durango
35-5020-07 Ford, up to 1998
35-5020-34Ford 1999 to 04;
F-150 1997 to 04
35-5020-10Ford SportTrac
& Ranger
35-5020-51 Jeep
35-5020-31 Nissan
35-5020-41 Toyota
35-5020-45 Land Rover
35-5020-17AM General:
Hummer H1
35-5020-352005 and up
Ford Super Duty
35-5020-362007 Ford
F-550 Only
35-5020-81 Chevy 5500
Mile Marker electric winches offer superior pulling power while maintaining a low elec-tric current. From the potency of a perma-nent magnet ATV winch, to the durability of a series wound Truck recovery system, Mile Marker has got you covered. Discover why Mile Marker winches are proud to be Abused World Wide.™
Hydraulic WinchesContinuous duty cycle, smooth operation, and submersible operation are among the many benefits of a Mile Marker power steering driven Hydraulic Winch. As the primary outfit for the U.S Army’s HMMWV, rely on this legendary tool to lead your rig through your very own battlegrounds.
2500 POUND ATV/UTILITY WINCH FEATURES PE2500 Planetary Gearing, Dynamic Braking, Both 12’ Hand Control and Handlebar Remote, Heavy Duty Permanent Magnet Motor, Free Spooling and Power In and Power Out Marker has got you
PERFORMANCE PE2500 Line Pull Line Speed Motor
Part Number 76-50105Rated line pull 2500 lbs. (1134 kg) Gear Train PlanetaryGear Ratio 153:1Motor .9 hp Perm Magnet (.7kw ), 12 volt
Control Pendant Illuminated 2-Button & Handlebar switch
Dimensions (LxWxH) 13” x 5” x 5” (330mm x 127mm x 127mm)
Cable 3/16” x 50’(4200 nominal)(4.76 MM X 15.2 M)
Drum Size: 2” (50 mm) x 2.95” (75 mm)
Net weight 24 lbs. (11.8 kg)Bolt Pattern 3” x 4.87”
(76.2 mm x 124 mm)
SPECIFICATIONS PE2500
lbs. kgs. fpm mpm amps@12v0 0 19.1 5.8 12
500 227 15.3 4.7 311000 454 12.8 3.9 621500 680 9 2.7 902000 907 6.4 2 1142500 1134 4.5 1.4 154
WINCH ACCESSORIES:
8000 POUND RECOVERY WINCH FEATURES PEC8 NEW DESIGN, Clockable Clutch, Planetary Gear-ing, Automatic Load Holding Brake, Illuminated Controls, Heavy Duty Permanent Magnet Motor, Free Spooling, Power In and Power Out, Galvanized Roller Fairlead, FRP Sheathing on all Cables, 100’ of 5/16” Aircraft Cable.Marker has got you covered. Dis-
PERFORMANCE PEC8lbs. kgs. fpm mpm amps@12v0 0 13 3.9 35
2000 907 11 3.3 1004000 1814 9 2.7 1806000 2722 6 1.8 2308000 3629 5 1.5 300
Line Pull Line Speed Motor
Part Number 77-50140Rated line pull 8,000 LBS (3,629 KG) Gear Train 3 Stage PlanetaryGear Ratio 210:1Motor 4.1 HP Perm. Magnet (3 KW) 12V DCControl Pendant Illuminated 2-Button
Dimensions (LxWxH) 21” X 6.22” X 8.25” (533MM X 158 MM X 209.5 MM)
Cable 5/16” x 100’(9,800 nominal)(7.94 MM X 30.5M)
Drum Size: 2.5” (6.4 cm)/9” (23cm)Net weight 80 lbs. (36 kg)Bolt Pattern 10” x 4.5” (254MM X 114MM)
(4 bolts, 3/8”)
SPECIFICATIONS PEC8
INTEGRATED WINCH SERIES PERFORMANCE SI12000lbs. kgs. fpm mpm amps@12v0 0 23 7 90
2000 907 12.8 3.9 1454000 1814 9.7 2.9 1856000 2722 7.9 2.4 2308000 3629 7.1 2.1 27010000 4536 5.1 1.6 31512000 5443 4.5 1.4 315
lbs. kgs. fpm mpm amps@12v0 0 25.7 7.8 90
2000 907 15.1 4.6 1504000 1814 10.5 3.2 2106000 2722 7.9 2.4 2708000 3629 5.9 1.8 3209500 4309 4.3 1.3 375
Line Pull Line Speed Motor Part Number 76-50152 (SI12000) 76-50147 (SI95000) Rated line pull 12,000 LBS (5,443 KG) & 9,500 lbs (4309 kg) Gear Train 3 Stage PlanetaryGear Ratio SI12000: 296:1 SI9500: 212:1Motor 4.8 HP Series Wound(3.6 KW) 12V DCControl Pendant Illuminated 2-Button
Dimensions (LxWxH) 21.6” X 6.6” X 10” (548mm X 160 MM X 254 MM)
Cable 3/8” x 100’(14,400 nominal)(9.53 MM X 30.5M)
Drum Size: 2.5” (6.4 cm)/9” (23cm)Net weight 93 lbs. (42 kg)Bolt Pattern 10” x 4.5” (254MM X 114MM)
(4 bolts, 3/8”)
SPECIFICATIONS SI SERIES
PERFORMANCE SI9500
ACCESSORY KIT PN: 19-0000-1
NEOPRENE COVER PN: 8503 OR 8504PN 8503: Fits Hydraulic WinchesPN 8504: Fits Electric Winches 6,000 pounds and Greater
WINCHES
WWW.CROFTTRUCKSA.COM CALL 210-227-5187WWW.CROFTHITCH.COM 1503 N. BRAZOSWWW.CROFTTRUCKEQUIP.COM SAN ANTONO TEXAS 78207
ABUSED WORLD WIDE ABUSED WORLD WIDE
Electric Winches Hydraulic Winches
FEATURES HI9000 SPECIFICATIONS HI9000
PERFORMANCE HI9000
FreespoolingMechanical lockSealed against the elementsCan use underwaterCorrosion resistantStainless steel tie bars and fasteners2 speedpower in & power out
Part Number 75-50085C
Rated line pull 9,000 lbs.@1500 PSI (4,090 kgs.)
Gear Train PlanetaryGear Ratio 6:1 (low gear)1:1(high gear) Motor 14 C.I. HydraulicDirectional Control 12V Solenoid, 3 wayValve Integrated (max flow 3.5 gpm) 2 ampsControl Pendant 12’ Wired Remote
Hoses5’ & 6.5’: steel braid, high pres-sure, 3k PSI, Uses size 6 JIC swivels on both ends
Cable 3/8” x 100’ (14,400 lbs. nominal)Drum Size: 2.5” (6.4 cm)/9” (23cm)Total shipping weight 103 lbs. (46.7 kg)Bolt Pattern 10” x 4.5” (4 bolts, 3/8”)
3.5 GPM @ 1500 PSILayer of Cable 1 2 3 4Line speed-low gear (FPM) 6.16 7.48 8.8 10.5Rated pull (lbs.) 9,000 7,300 6,200 5,400Line speed-high gear (FPM) 33.6 38.4 48 57Rated pull (lbs.) 1,500 1,200 1,000 900
9,000 POUND HYDRAULIC
FEATURES HI10500 SPECIFICATIONS HI10500
PERFORMANCE HI10500
FreespoolingMechanical lockSealed against the elementsCan use underwaterCorrosion resistantStainless steel tie bars and fasteners2 speedpower in & power out
3.5 GPM @ 1500 PSILayer of Cable 1 2 3 4Line speed-low gear (FPM) 5.65 6.43 7.41 8.58Rated pull (lbs.) 10,500 8,500 7,400 6,400Line speed-high gear (FPM) 31 36 42 48Rated pull (lbs.) 1,600 1,300 1,200 1,000
Part Number 75-50050CRated line pull 10,500 lbs.@1500 PSI (4,770 kgs.) Gear Train PlanetaryGear Ratio 6:1 (low gear)1:1(high gear) Motor 17.9 C.I. HydraulicDirectional Control 12V Solenoid, 3 wayValve Integrated (max flow 3.5 gpm) 2 ampsControl Pendant 12’ Wired Remote
Hoses5’ & 6.5’: steel braid, high pres-sure, 3k PSI, Uses size 6 JIC swivels on both ends
Cable 3/8” x 100’ (14,400 lbs. nominal)Drum Size: 2.5” (6.4 cm)/9” (23cm)Total shipping weight 103 lbs. (46.7 kg)Bolt Pattern 10” x 4.5” (4 bolts, 3/8”)
10,500 POUND HYDRAULIC
12,000 POUND HYDRAULICFEATURES HI12000 SPECIFICATIONS HI12000
PERFORMANCE HI12000
FreespoolingMechanical lockSealed against the elementsCan use underwaterCorrosion resistantStainless steel tie bars and fasteners2 speedpower in & power outReversible MountingDuctile Iron Body
3.5 GPM @ 1500 PSILayer of Cable 1 2 3 4Line speed-low gear (FPM) 5.65 6.43 7.41 8.58Rated pull (lbs.) 12,000 9,400 8,200 7,000Line speed-high gear (FPM) 31 36 42 48Rated pull (lbs.) 2,000 1,550 1,350 1,150
Part Number 75-52000CRated line pull 12,000 lbs.@1500 PSI (5,454 kgs.) Gear Train PlanetaryGear Ratio 6:1 (low gear)1:1(high gear) Motor 18.7 C.I. HydraulicDirectional Control 12V Solenoid, 3 wayValve Integrated (max flow 7 gpm) 2 ampsControl Pendant 12’ Wired Remote
Hoses5’ & 6.5’: steel braid, high pres-sure, 3k PSI, Uses size 6 JIC swivels on both ends
Cable 3/8” x 100’ (14,400 lbs. nominal)Drum Size: 2.5” (6.4 cm)/9” (23cm)Total shipping weight 110 lbs. (49.9 kg)Bolt Pattern 10” x 4.5”
(4 bolts, 3/8”)
VEHICLE ADAPTER KIT
Required with HI Series Hydraulic Winch
To be used to adapt power steer-ing pump to HI Series Winch System. See Chart for Specific
Vehicle Application.
PART NUMBER: APPLICATION:
35-5020-15GM, Dodge, Int’l,
Chevrolet, H2
35-5020-222003 & up
Durango
35-5020-07 Ford, up to 1998
35-5020-34Ford 1999 to 04;
F-150 1997 to 04
35-5020-10Ford SportTrac
& Ranger
35-5020-51 Jeep
35-5020-31 Nissan
35-5020-41 Toyota
35-5020-45 Land Rover
35-5020-17AM General:
Hummer H1
35-5020-352005 and up
Ford Super Duty
35-5020-362007 Ford
F-550 Only
35-5020-81 Chevy 5500
Mile Marker electric winches offer superior pulling power while maintaining a low elec-tric current. From the potency of a perma-nent magnet ATV winch, to the durability of a series wound Truck recovery system, Mile Marker has got you covered. Discover why Mile Marker winches are proud to be Abused World Wide.™
Hydraulic WinchesContinuous duty cycle, smooth operation, and submersible operation are among the many benefits of a Mile Marker power steering driven Hydraulic Winch. As the primary outfit for the U.S Army’s HMMWV, rely on this legendary tool to lead your rig through your very own battlegrounds.
2500 POUND ATV/UTILITY WINCH FEATURES PE2500 Planetary Gearing, Dynamic Braking, Both 12’ Hand Control and Handlebar Remote, Heavy Duty Permanent Magnet Motor, Free Spooling and Power In and Power Out Marker has got you
PERFORMANCE PE2500 Line Pull Line Speed Motor
Part Number 76-50105Rated line pull 2500 lbs. (1134 kg) Gear Train PlanetaryGear Ratio 153:1Motor .9 hp Perm Magnet (.7kw ), 12 volt
Control Pendant Illuminated 2-Button & Handlebar switch
Dimensions (LxWxH) 13” x 5” x 5” (330mm x 127mm x 127mm)
Cable 3/16” x 50’(4200 nominal)(4.76 MM X 15.2 M)
Drum Size: 2” (50 mm) x 2.95” (75 mm)
Net weight 24 lbs. (11.8 kg)Bolt Pattern 3” x 4.87”
(76.2 mm x 124 mm)
SPECIFICATIONS PE2500
lbs. kgs. fpm mpm amps@12v0 0 19.1 5.8 12
500 227 15.3 4.7 311000 454 12.8 3.9 621500 680 9 2.7 902000 907 6.4 2 1142500 1134 4.5 1.4 154
WINCH ACCESSORIES:
8000 POUND RECOVERY WINCH FEATURES PEC8 NEW DESIGN, Clockable Clutch, Planetary Gear-ing, Automatic Load Holding Brake, Illuminated Controls, Heavy Duty Permanent Magnet Motor, Free Spooling, Power In and Power Out, Galvanized Roller Fairlead, FRP Sheathing on all Cables, 100’ of 5/16” Aircraft Cable.Marker has got you covered. Dis-
PERFORMANCE PEC8lbs. kgs. fpm mpm amps@12v0 0 13 3.9 35
2000 907 11 3.3 1004000 1814 9 2.7 1806000 2722 6 1.8 2308000 3629 5 1.5 300
Line Pull Line Speed Motor
Part Number 77-50140Rated line pull 8,000 LBS (3,629 KG) Gear Train 3 Stage PlanetaryGear Ratio 210:1Motor 4.1 HP Perm. Magnet (3 KW) 12V DCControl Pendant Illuminated 2-Button
Dimensions (LxWxH) 21” X 6.22” X 8.25” (533MM X 158 MM X 209.5 MM)
Cable 5/16” x 100’(9,800 nominal)(7.94 MM X 30.5M)
Drum Size: 2.5” (6.4 cm)/9” (23cm)Net weight 80 lbs. (36 kg)Bolt Pattern 10” x 4.5” (254MM X 114MM)
(4 bolts, 3/8”)
SPECIFICATIONS PEC8
INTEGRATED WINCH SERIES PERFORMANCE SI12000lbs. kgs. fpm mpm amps@12v0 0 23 7 90
2000 907 12.8 3.9 1454000 1814 9.7 2.9 1856000 2722 7.9 2.4 2308000 3629 7.1 2.1 27010000 4536 5.1 1.6 31512000 5443 4.5 1.4 315
lbs. kgs. fpm mpm amps@12v0 0 25.7 7.8 90
2000 907 15.1 4.6 1504000 1814 10.5 3.2 2106000 2722 7.9 2.4 2708000 3629 5.9 1.8 3209500 4309 4.3 1.3 375
Line Pull Line Speed Motor Part Number 76-50152 (SI12000) 76-50147 (SI95000) Rated line pull 12,000 LBS (5,443 KG) & 9,500 lbs (4309 kg) Gear Train 3 Stage PlanetaryGear Ratio SI12000: 296:1 SI9500: 212:1Motor 4.8 HP Series Wound(3.6 KW) 12V DCControl Pendant Illuminated 2-Button
Dimensions (LxWxH) 21.6” X 6.6” X 10” (548mm X 160 MM X 254 MM)
Cable 3/8” x 100’(14,400 nominal)(9.53 MM X 30.5M)
Drum Size: 2.5” (6.4 cm)/9” (23cm)Net weight 93 lbs. (42 kg)Bolt Pattern 10” x 4.5” (254MM X 114MM)
(4 bolts, 3/8”)
SPECIFICATIONS SI SERIES
PERFORMANCE SI9500
ACCESSORY KIT PN: 19-0000-1
NEOPRENE COVER PN: 8503 OR 8504PN 8503: Fits Hydraulic WinchesPN 8504: Fits Electric Winches 6,000 pounds and Greater
WINCHES
WWW.CROFTTRUCKSA.COM CALL 210-227-5187WWW.CROFTHITCH.COM 1503 N. BRAZOSWWW.CROFTTRUCKEQUIP.COM SAN ANTONO TEXAS 78207
ABUSED WORLD WIDE ABUSED WORLD WIDE
Electric Winches Hydraulic Winches
FEATURES HI9000 SPECIFICATIONS HI9000
PERFORMANCE HI9000
FreespoolingMechanical lockSealed against the elementsCan use underwaterCorrosion resistantStainless steel tie bars and fasteners2 speedpower in & power out
Part Number 75-50085C
Rated line pull 9,000 lbs.@1500 PSI (4,090 kgs.)
Gear Train PlanetaryGear Ratio 6:1 (low gear)1:1(high gear) Motor 14 C.I. HydraulicDirectional Control 12V Solenoid, 3 wayValve Integrated (max flow 3.5 gpm) 2 ampsControl Pendant 12’ Wired Remote
Hoses5’ & 6.5’: steel braid, high pres-sure, 3k PSI, Uses size 6 JIC swivels on both ends
Cable 3/8” x 100’ (14,400 lbs. nominal)Drum Size: 2.5” (6.4 cm)/9” (23cm)Total shipping weight 103 lbs. (46.7 kg)Bolt Pattern 10” x 4.5” (4 bolts, 3/8”)
3.5 GPM @ 1500 PSILayer of Cable 1 2 3 4Line speed-low gear (FPM) 6.16 7.48 8.8 10.5Rated pull (lbs.) 9,000 7,300 6,200 5,400Line speed-high gear (FPM) 33.6 38.4 48 57Rated pull (lbs.) 1,500 1,200 1,000 900
9,000 POUND HYDRAULIC
FEATURES HI10500 SPECIFICATIONS HI10500
PERFORMANCE HI10500
FreespoolingMechanical lockSealed against the elementsCan use underwaterCorrosion resistantStainless steel tie bars and fasteners2 speedpower in & power out
3.5 GPM @ 1500 PSILayer of Cable 1 2 3 4Line speed-low gear (FPM) 5.65 6.43 7.41 8.58Rated pull (lbs.) 10,500 8,500 7,400 6,400Line speed-high gear (FPM) 31 36 42 48Rated pull (lbs.) 1,600 1,300 1,200 1,000
Part Number 75-50050CRated line pull 10,500 lbs.@1500 PSI (4,770 kgs.) Gear Train PlanetaryGear Ratio 6:1 (low gear)1:1(high gear) Motor 17.9 C.I. HydraulicDirectional Control 12V Solenoid, 3 wayValve Integrated (max flow 3.5 gpm) 2 ampsControl Pendant 12’ Wired Remote
Hoses5’ & 6.5’: steel braid, high pres-sure, 3k PSI, Uses size 6 JIC swivels on both ends
Cable 3/8” x 100’ (14,400 lbs. nominal)Drum Size: 2.5” (6.4 cm)/9” (23cm)Total shipping weight 103 lbs. (46.7 kg)Bolt Pattern 10” x 4.5” (4 bolts, 3/8”)
10,500 POUND HYDRAULIC
12,000 POUND HYDRAULICFEATURES HI12000 SPECIFICATIONS HI12000
PERFORMANCE HI12000
FreespoolingMechanical lockSealed against the elementsCan use underwaterCorrosion resistantStainless steel tie bars and fasteners2 speedpower in & power outReversible MountingDuctile Iron Body
3.5 GPM @ 1500 PSILayer of Cable 1 2 3 4Line speed-low gear (FPM) 5.65 6.43 7.41 8.58Rated pull (lbs.) 12,000 9,400 8,200 7,000Line speed-high gear (FPM) 31 36 42 48Rated pull (lbs.) 2,000 1,550 1,350 1,150
Part Number 75-52000CRated line pull 12,000 lbs.@1500 PSI (5,454 kgs.) Gear Train PlanetaryGear Ratio 6:1 (low gear)1:1(high gear) Motor 18.7 C.I. HydraulicDirectional Control 12V Solenoid, 3 wayValve Integrated (max flow 7 gpm) 2 ampsControl Pendant 12’ Wired Remote
Hoses5’ & 6.5’: steel braid, high pres-sure, 3k PSI, Uses size 6 JIC swivels on both ends
Cable 3/8” x 100’ (14,400 lbs. nominal)Drum Size: 2.5” (6.4 cm)/9” (23cm)Total shipping weight 110 lbs. (49.9 kg)Bolt Pattern 10” x 4.5”
(4 bolts, 3/8”)
VEHICLE ADAPTER KIT
Required with HI Series Hydraulic Winch
To be used to adapt power steer-ing pump to HI Series Winch System. See Chart for Specific
Vehicle Application.
PART NUMBER: APPLICATION:
35-5020-15GM, Dodge, Int’l,
Chevrolet, H2
35-5020-222003 & up
Durango
35-5020-07 Ford, up to 1998
35-5020-34Ford 1999 to 04;
F-150 1997 to 04
35-5020-10Ford SportTrac
& Ranger
35-5020-51 Jeep
35-5020-31 Nissan
35-5020-41 Toyota
35-5020-45 Land Rover
35-5020-17AM General:
Hummer H1
35-5020-352005 and up
Ford Super Duty
35-5020-362007 Ford
F-550 Only
35-5020-81 Chevy 5500
Mile Marker electric winches offer superior pulling power while maintaining a low elec-tric current. From the potency of a perma-nent magnet ATV winch, to the durability of a series wound Truck recovery system, Mile Marker has got you covered. Discover why Mile Marker winches are proud to be Abused World Wide.™
Hydraulic WinchesContinuous duty cycle, smooth operation, and submersible operation are among the many benefits of a Mile Marker power steering driven Hydraulic Winch. As the primary outfit for the U.S Army’s HMMWV, rely on this legendary tool to lead your rig through your very own battlegrounds.
2500 POUND ATV/UTILITY WINCH FEATURES PE2500 Planetary Gearing, Dynamic Braking, Both 12’ Hand Control and Handlebar Remote, Heavy Duty Permanent Magnet Motor, Free Spooling and Power In and Power Out Marker has got you
PERFORMANCE PE2500 Line Pull Line Speed Motor
Part Number 76-50105Rated line pull 2500 lbs. (1134 kg) Gear Train PlanetaryGear Ratio 153:1Motor .9 hp Perm Magnet (.7kw ), 12 volt
Control Pendant Illuminated 2-Button & Handlebar switch
Dimensions (LxWxH) 13” x 5” x 5” (330mm x 127mm x 127mm)
Cable 3/16” x 50’(4200 nominal)(4.76 MM X 15.2 M)
Drum Size: 2” (50 mm) x 2.95” (75 mm)
Net weight 24 lbs. (11.8 kg)Bolt Pattern 3” x 4.87”
(76.2 mm x 124 mm)
SPECIFICATIONS PE2500
lbs. kgs. fpm mpm amps@12v0 0 19.1 5.8 12
500 227 15.3 4.7 311000 454 12.8 3.9 621500 680 9 2.7 902000 907 6.4 2 1142500 1134 4.5 1.4 154
WINCH ACCESSORIES:
8000 POUND RECOVERY WINCH FEATURES PEC8 NEW DESIGN, Clockable Clutch, Planetary Gear-ing, Automatic Load Holding Brake, Illuminated Controls, Heavy Duty Permanent Magnet Motor, Free Spooling, Power In and Power Out, Galvanized Roller Fairlead, FRP Sheathing on all Cables, 100’ of 5/16” Aircraft Cable.Marker has got you covered. Dis-
PERFORMANCE PEC8lbs. kgs. fpm mpm amps@12v0 0 13 3.9 35
2000 907 11 3.3 1004000 1814 9 2.7 1806000 2722 6 1.8 2308000 3629 5 1.5 300
Line Pull Line Speed Motor
Part Number 77-50140Rated line pull 8,000 LBS (3,629 KG) Gear Train 3 Stage PlanetaryGear Ratio 210:1Motor 4.1 HP Perm. Magnet (3 KW) 12V DCControl Pendant Illuminated 2-Button
Dimensions (LxWxH) 21” X 6.22” X 8.25” (533MM X 158 MM X 209.5 MM)
Cable 5/16” x 100’(9,800 nominal)(7.94 MM X 30.5M)
Drum Size: 2.5” (6.4 cm)/9” (23cm)Net weight 80 lbs. (36 kg)Bolt Pattern 10” x 4.5” (254MM X 114MM)
(4 bolts, 3/8”)
SPECIFICATIONS PEC8
INTEGRATED WINCH SERIES PERFORMANCE SI12000lbs. kgs. fpm mpm amps@12v0 0 23 7 90
2000 907 12.8 3.9 1454000 1814 9.7 2.9 1856000 2722 7.9 2.4 2308000 3629 7.1 2.1 27010000 4536 5.1 1.6 31512000 5443 4.5 1.4 315
lbs. kgs. fpm mpm amps@12v0 0 25.7 7.8 90
2000 907 15.1 4.6 1504000 1814 10.5 3.2 2106000 2722 7.9 2.4 2708000 3629 5.9 1.8 3209500 4309 4.3 1.3 375
Line Pull Line Speed Motor Part Number 76-50152 (SI12000) 76-50147 (SI95000) Rated line pull 12,000 LBS (5,443 KG) & 9,500 lbs (4309 kg) Gear Train 3 Stage PlanetaryGear Ratio SI12000: 296:1 SI9500: 212:1Motor 4.8 HP Series Wound(3.6 KW) 12V DCControl Pendant Illuminated 2-Button
Dimensions (LxWxH) 21.6” X 6.6” X 10” (548mm X 160 MM X 254 MM)
Cable 3/8” x 100’(14,400 nominal)(9.53 MM X 30.5M)
Drum Size: 2.5” (6.4 cm)/9” (23cm)Net weight 93 lbs. (42 kg)Bolt Pattern 10” x 4.5” (254MM X 114MM)
(4 bolts, 3/8”)
SPECIFICATIONS SI SERIES
PERFORMANCE SI9500
ACCESSORY KIT PN: 19-0000-1
NEOPRENE COVER PN: 8503 OR 8504PN 8503: Fits Hydraulic WinchesPN 8504: Fits Electric Winches 6,000 pounds and Greater
