USBlanks - Foam E-Z Blanks Product... · USBlanks 4-USBlanks 4-USBlanks 4-Product Catalog Phone:...
Transcript of USBlanks - Foam E-Z Blanks Product... · USBlanks 4-USBlanks 4-USBlanks 4-Product Catalog Phone:...
![Page 1: USBlanks - Foam E-Z Blanks Product... · USBlanks 4-USBlanks 4-USBlanks 4-Product Catalog Phone: (310) 225-6774 Fax: (310) 225-6922 E-Mail: info@usblanks.com Printed August 15, 2006](https://reader033.fdocuments.us/reader033/viewer/2022051900/5fef2e6ecc09a25be32f350a/html5/thumbnails/1.jpg)
BlanksUSBlanksUS
BlanksUS
Product CatalogPhone: (310) 225-6774
Fax: (310) 225-6922
E-Mail: [email protected]
Printed August 15, 2006
![Page 2: USBlanks - Foam E-Z Blanks Product... · USBlanks 4-USBlanks 4-USBlanks 4-Product Catalog Phone: (310) 225-6774 Fax: (310) 225-6922 E-Mail: info@usblanks.com Printed August 15, 2006](https://reader033.fdocuments.us/reader033/viewer/2022051900/5fef2e6ecc09a25be32f350a/html5/thumbnails/2.jpg)
�
July 2006
Welcome to US Blanks, LLC. We thank you for requesting this draft version of our product catalog. We are proud to introduce an all new product line, designed and shaped by some of the world’s most re-spected surfboard builders. We have a small number of the proven classic shapes combined with a large new offering of cutting edge designs. Our product line will continue to expand with an 11’3’’ Down-ing mold online in August followed by additional Yater molds, gun molds, and more. Please watch our website for announcements as new molds come on line.
This draft catalog should list all the information needed to determine which of our blanks is best suited for your board design. We apologize for not having the entire catalog complete, but felt it better served our customers to share the draft copy without waiting for the remaining information. Be sure, the completion of this catalog is a very high priority for us.
The wire frame diagrams presented in this catalog are based on the plugs and are drawn on a scale of 1:12 for blanks shorter than 8’0” and 1:16 on blanks 8’0” and longer.
The US Blanks team has over 125 years combined experience in making polyurethane foam surfboard blanks. We offer a water blown, TDI based polyester polyurethane blank because we feel this combina-tion offers the strongest blank possible with the best performance qualities.
US Blanks is dedicated to offering unmatched value through quality, selection, and service. We are starting our production offering three densities; Red, Blue and Green, but plan to offer additional densi-ties in the near future. Our team perfected the custom blank and will continue to offer custom glue-ups including rocker, wood selection, stringer combinations, and glue color. Our wood mill has the capabil-ity to cut any thickness of wood from our raw lumber stock of Basswood. Cedar and plywood stringers will be available shortly. We will initially offer delivery service for those customers between San Diego and Santa Barbara, with routes and delivery schedules to be determined.
US Blanks has received all operating permits from every regulatory agency in our jurisdiction. We be-lieve US Blanks is the only 100% legal TDI based surfboard blank facility in the country. We place an extremely high priority on protecting the health of our employees, neighbors, and the environment. We understand their future is our future.
To place an order, please print and fax an order form and a California resale certificate from the links on our website at www.usblanks.com. Orders may also be placed by e-mail or by phoning our office at (310) 225-6774.
It is our goal to be operating at full capacity as quickly as possible. However, we will not sacrifice the quality of our product to do so. As we anticipate the level of orders to exceed our production limits initially, we ask for your patience in delivery time.
We look forward to servicing you in the near future.
Kimberly ThressPresident
![Page 3: USBlanks - Foam E-Z Blanks Product... · USBlanks 4-USBlanks 4-USBlanks 4-Product Catalog Phone: (310) 225-6774 Fax: (310) 225-6922 E-Mail: info@usblanks.com Printed August 15, 2006](https://reader033.fdocuments.us/reader033/viewer/2022051900/5fef2e6ecc09a25be32f350a/html5/thumbnails/3.jpg)
�
BlanksUS TM 6'2"A
Designed and shaped by: Pat Rawson
Overall Bottom Length: 6' � �5/�6" (�90.34 cm)
Tip-to-tip Deck Length: 6' � 3/�6" (�88.44 cm)
Maximum Width: �3 5/8” (60.0� cm)
Maximum Thickness: � �5/�6" (7.46 cm)
Displacement: Forthcoming
History: Introduced July �006
Rockers: Natural
Shaper's Comments: This is my version of the
previous 6’�”C fish blank. I designed this one
as to be able to easily net a 6’�” by the bottom
measurement. Bottom rocker is a shorter version
of the natural rocker of the 6’9”A I made in �00�.
This blank can be ordered wider or narrower as to
allow for stronger decks/rails near the perimeter
of the board outline, and less waste.
� 7/ " 7.30 cm
���/�6" 4.�9 cm
�5/�6" �.38 cm
7/�6" �.�� cm
�9/64" 0.75 cm
5/8 " �.59 cm
59/64" �.34 cm
� 5/�6" 3.33 cm
� 5/8 " 4.�3 cm
� �/8 " 5.40 cm
� 7/�6" 6.�9 cm
� 3/4 " 6.99 cm
� 7/8 " 7.30 cm
� �/� " 6.35 cm
� �/4 " 5.7� cm
� " 33.8� cm
���/�6" 4.�9 cm
6"
�� "
�8 "
�4 "
�4 "
�8 "
�� "
6"
Center
�5 3/8 "39.05 cm
�9 �/4 "48.90 cm
�� 7/�6"54.45 cm
���5/�6"58.36 cm
�3 5/8 "60.0� cm
�� �/6 "56.30 cm
�0 �/� "5�.07 cm
�8 5/8 "47. 3� cm
�6 3/�6"4�.�� cm
8 " �0.3� cm
�� �/� " 3�.75 cm
8
4 3/4"��.07 cm
�" �.54 cm
� �3/�6" 4.60 cm
� �/4 " 3.�8 cm
![Page 4: USBlanks - Foam E-Z Blanks Product... · USBlanks 4-USBlanks 4-USBlanks 4-Product Catalog Phone: (310) 225-6774 Fax: (310) 225-6922 E-Mail: info@usblanks.com Printed August 15, 2006](https://reader033.fdocuments.us/reader033/viewer/2022051900/5fef2e6ecc09a25be32f350a/html5/thumbnails/4.jpg)
3
BlanksUS TM 6'2"P
Designed and shaped by: Timmy Patterson
Overall Bottom Length: 6' � 3/4" (�89.87 cm)
Tip-to-tip Deck Length: 6' �" (�87.96 cm)
Maximum Width: �0 5/8" (5�.39 cm)
Maximum Thickness: � �/�" (6.35 cm)
Displacement: Forthcoming
History: Introduced July �006
Rockers: Natural
Shaper's Comments: Blank is designed for team
boards and production shaping. It is a shorter
version of the 6’7”P, which has a little more
thickness in the nose and tail than the original.
A medium tolerance blank.
� �/ " 6.35 cm
� 7/�6" 3.65 cm
�3/�6" �.06 cm
3/8 " 0.95 cm
5/�6" 0.79 cm
5/8 " �.59 cm
�/8 " �.86 cm
� ��/�6" 4.�9 cm
� �/4 " 3.�8 cm
� 5/8 " 4.�3 cm
� " 5.08 cm
� �/4 " 5.7� cm
� �7/3�" 6.43 cm
� 3/8 " 6.03 cm
� 3/�6" 5.57 cm
� " 4.76 cm
� 3/8 " 3.49 cm
6"
�� "
�8 "
�4 "
�4 "
�8 "
�� "
6"
Center
�0 �/8 "�5.7� cm
�4 �/8 "35.88 cm
�6 7/8 "4�.86 cm
�8 3/4 "47.63 cm
�0 5/8 "5�.39 cm
�9 7/�6"49.37 cm
�7 7/8 "45.40 cm
�5 7/�6"39.�� cm
�� 7/8 "30.�6 cm
4 " ��.43 cm
6 �/8 " �5.58 cm
�
� 3/8 " 6.03 cm
4 7/�6"��.�7 cm
3/4 " �.9� cm
�" �.54 cm
� 7/8
�/�
![Page 5: USBlanks - Foam E-Z Blanks Product... · USBlanks 4-USBlanks 4-USBlanks 4-Product Catalog Phone: (310) 225-6774 Fax: (310) 225-6922 E-Mail: info@usblanks.com Printed August 15, 2006](https://reader033.fdocuments.us/reader033/viewer/2022051900/5fef2e6ecc09a25be32f350a/html5/thumbnails/5.jpg)
4
BlanksUS TM 6'3"EA
Designed and shaped by: Eric Arakawa
Overall Bottom Length: 6' 4 3/8" (�83.83 cm)
Tip-to-tip Deck Length: 6' 3 3/8" (�9�.45 cm)
Maximum Width: �0 �3/�6" (5�.86 cm)
Maximum Thickness: � 9/�6" (6.5� cm)
Displacement: Forthcoming
History: Introduced July �006
Rockers: Natural
Shaper's Comments: This is a thinner version
of the 6’4” EA.
3 5/ " �0.00 cm
� �3/�6" 4.60 cm
�5/�6" �.38 cm
7/�6" �.�� cm
9/3�" 0.7� cm
9/�6" �.43 cm
�5/�6" �.38 cm
� �3/3�" 3.57 cm
� 3/�6" 3.0� cm
� 5/8 " 4.�3 cm
� " 5.08 cm
� �/4 " 5.7� cm
� �/� " 6.35 cm
� 5/�6" 5.87 cm
� 3/�6" 5.56 cm
� " 4.60 cm
� �/� " 3.8� cm
6"
�� "
�8 "
�4 "
�4 "
�8 "
�� "
6"
Center
�0 7/�6"�6.5� cm
�4 �/� "36.83 cm
�7 3/�6"43.66 cm
�9 �/8 "48.58 cm
�0�3/�6"5�.86 cm
�9 5/�6"49.05 cm
�7 3/4 "45.09 cm
�5 9/�6"39.53 cm
�� 9/�6"3�.9� cm
4 " �0.80 cm
8 "�0.3� cm
�6
� �/�6" 5.�4 cm
5 9/�6" �4.�3 cm
3/4 " �.9� cm
� " 3.�8 cm
�3/�6
�/4
�/4
![Page 6: USBlanks - Foam E-Z Blanks Product... · USBlanks 4-USBlanks 4-USBlanks 4-Product Catalog Phone: (310) 225-6774 Fax: (310) 225-6922 E-Mail: info@usblanks.com Printed August 15, 2006](https://reader033.fdocuments.us/reader033/viewer/2022051900/5fef2e6ecc09a25be32f350a/html5/thumbnails/6.jpg)
5
BlanksUS TM 6'4"EA
Designed and shaped by: Eric Arakawa
Overall Bottom Length: 6' 4 9/�6" (�94.47 cm)
Tip-to-tip Deck Length: 6' 3 9/�6" (�9�.93 cm)
Maximum Width: �0 �3/�6" (5�.86 cm)
Maximum Thickness: � �3/�6" (7.�4 cm)
Displacement: Forthcoming
History: Introduced July �006
Rockers: Natural
Shaper's Comments: Designed to be a versatile
blank for boards 6’�” and under. I added a little
nose width to accommodate most modern full
nose short boards.
6"
�� "
�8 "
�4 "
�4 "
�8 "
�� "
6"
Center
5 7/�6"— �3.8� cm
3 �/4 "— 8.�6 cm
��3/�6"— 4.60 cm
� 5/�6"— 3.33 cm
7/�6"— �.�� cm
5/�6"— 0.79 cm
5/8 "— �.59 cm
3�/3�"— �.46 cm
� � / � "— 3.8� cm
� 3/�6"— 5.56 cm
— � 3 / �6 " 3.0� cm
4 "�0.�6 cm
—
� �/4 " 3.�8 cm
—
���/�6" 4.�9 cm
—
� �/8 " 5.40 cm
—
� 3/8 " 6.03 cm
—
� 3/4 " 6.99 cm
—
� �/� " 6.35 cm
—
� 5/�6" 5.87 cm
—
��5/�6" 4.9� cm
—
� 9/�6" 3.97 cm
—
� �/4 " 3.�8 cm
—
�0 5/�6" �6.�9 cm
—
�4 �/4 " 36.�0 cm
—
�7�/8 " 43.50 cm
—
�9�/8 " 48.58 cm
—
�0�3/�6 " 5�.86 cm
—
�9�/4 " 48.90 cm
—
�7��/�6 " 44.93 cm
—
�5 3 / 8 " 39.05 cm
—
��5/�6" 3�.�7 cm
—
8 " �0.3� cm
—
![Page 7: USBlanks - Foam E-Z Blanks Product... · USBlanks 4-USBlanks 4-USBlanks 4-Product Catalog Phone: (310) 225-6774 Fax: (310) 225-6922 E-Mail: info@usblanks.com Printed August 15, 2006](https://reader033.fdocuments.us/reader033/viewer/2022051900/5fef2e6ecc09a25be32f350a/html5/thumbnails/7.jpg)
6
BlanksUS TM 6'5"A
Designed and shaped by: Pat Rawson
6"
�� "
�8 "
�4 "
�4 "
�8 "
�� "
6"
Center
5 � / 4 "— �3.34 cm
3 � / 4"— 8.�6 cm
� �5/�6"— 4.9� cm
� 3/�6"— 3.0� cm
5/8 "— �.59 cm
5/�6"— 0.79 cm
9/�6"— �.43 cm
�5/�6"— �.38 cm
� 5/�6"— 3.33 cm
��3/�6"— 4.60 cm
� �/8 "�.86 cm
—
� 3/4 "4.45 cm
—
� �/4 "5.7� cm
—
� 3/4 "6.99 cm
—
� 7/8 "7.30 cm
—
3 �/8 "7.94 cm
—
� 5/8 "6.67 cm
—
� �/� "6.35 cm
—
� �/8 "5.40 cm
—
� ��/�6" 4.�9 cm
—
� 3/8 "3.49 cm
— ���/� "3�.75 cm
—
�6"40.64 cm
—
�87/�6"46.83 cm
—
��7/8 "��.88 cm
—
�35/8 "60.0� cm
—
��5/8 "57.47 cm
—
�9"48.�6 cm
—
�5�/�6"38.�6 cm
—
7 �/� "�9.05 cm
—
Overall Bottom Length: 6' 5 7/8" (�97.80 cm)
Tip-to-tip Deck Length: 6' 5 �/8" (�95.90 cm)
Maximum Width: �3 5/8" (60.0� cm)
Maximum Thickness: 3 �/8" (7.94 cm)
Displacement: Forthcoming
History: Introduced July �006
Rockers: Natural
Shaper's Comments: This is my longer version of
the previous 6’�”C fish blank. I designed this one
as to be able to easily net a 6’5” by the bottom
measurement. Bottom rocker is a shorter ver-
sion of the natural rocker of the 6’9”A I made in
�00�. I basically “shrunk down” the 6’9”A for this
mold design. This blank can be ordered wider
or narrower as to allow for stronger decks/rails
near the perimeter of the board outline, and
less waste.
![Page 8: USBlanks - Foam E-Z Blanks Product... · USBlanks 4-USBlanks 4-USBlanks 4-Product Catalog Phone: (310) 225-6774 Fax: (310) 225-6922 E-Mail: info@usblanks.com Printed August 15, 2006](https://reader033.fdocuments.us/reader033/viewer/2022051900/5fef2e6ecc09a25be32f350a/html5/thumbnails/8.jpg)
7
BlanksUS TM 6'7"P
Designed and shaped by: Timmy Patterson
Overall Bottom Length: 6' 7 �/�" (�0�.93 cm)
Tip-to-tip Deck Length: 6' 6 �/�" (�99.39 cm)
Maximum Width: �� �/�" (54.6� cm)
Maximum Thickness: � 3/4" (6.99 cm)
Displacement: Forthcoming
History: Introduced July �006
Rockers: Natural
Shaper's Comments: Blank is designed for team
boards and production shaping. It has a little
more thickness in the nose and tail than the
original 6’6”P. A medium tolerance blank.
6"
�� "
�8 "
�4 "
�4 "
�8 "
�� "
6"
Center
36 "
5 �/4 "—�3.34 cm
3 �/4 "—9.53 cm
��5/�6"— �.94 cm
� �/8 "— �.86 cm
9/�6"—�.43 cm
7/�6"— 0.44 cm
3/4 "—�.9� cm
� �/4 "— 3.�8 cm
��3/�6"— 4.60 cm
� 7/�6"— 6.�9 cm
3/4 " �.9� cm
—
� �/�6" �.70 cm
—
� �/� " 3.8� cm
—
�" 5.08 cm
—
� 5/�6" 5.87 cm
—
� 3/4 "6.99 cm
—
� 7/�6" 6.�9 cm
—
� 3/�6" 5.56 cm
—
� �3/�6" 4.60 cm
—
� 3/8 " 3.49 cm
—
� " �.54 cm
— 6 3/4 " �7.�5 cm
—
�05/�6" �6.�9 cm
—
�57/�6" 39.�� cm
—
�85/�6"46.5� cm
—
�9�/� "49.53 cm
—
���/� "54.6� cm
—
�95/�6"49.05 cm
—
�79/�6"44.6� cm
—
�5�5/�6"40.48 cm
—
���/� "3�.75 cm
—
4 3/8 "��.�� cm
—
36 "
![Page 9: USBlanks - Foam E-Z Blanks Product... · USBlanks 4-USBlanks 4-USBlanks 4-Product Catalog Phone: (310) 225-6774 Fax: (310) 225-6922 E-Mail: info@usblanks.com Printed August 15, 2006](https://reader033.fdocuments.us/reader033/viewer/2022051900/5fef2e6ecc09a25be32f350a/html5/thumbnails/9.jpg)
8
BlanksUS TM 6'8"A
Designed and shaped by: Pat Rawson
6"
�� "
�8 "
�4 "
�4 "
�8 "
�� "
6"
Center
36 "
36 "
5 �/� "—�3.97 cm
3 3/3�"— 7.86 cm
���/�6"— 4.�9 cm
�5/�6"— �.38 cm
7/�6"— �.�� cm
�/3�"— 0.08 cm
�/3�"— 0.08 cm
5/�6"— 0.79 cm
9/�6"— �.43 cm
7/8 "— �.�� cm
� �/4 "— 3.�8 cm
��3/�6"— 4.60 cm
�" �.54 cm
—
� 5/8 " 4.�3 cm
—
� �/8 " 5.40 cm
—
� �/� " 6.35 cm
—
� 3/4 " 6.99 cm
—
� �5/�6" 7.46 cm
—
� 7/8 " 7.30 cm
—
� �5/�6" 7.46 cm
—
� 5/8 " 6.67 cm
—
� �/� " 6.35 cm
—
� �/4 " 5.7� cm
—
� 7/8 " 4.76 cm
—
� �/� " 3.8� cm
— 9 �/� "�4.�3 cm
—
�37/8 "35.�4 cm
—
�63/4 "4�.55 cm
—
�89/�6"47.�5 cm
—
�03/�6"5�.�8 cm
—
��7/8 " 55.56 cm
—
���5/�6"55.7� cm
—
��7/8 "55.56 cm
—
�0�/8 "5�.�� cm
—
�83/8 "46.67 cm
—
�5��/�6"39.85 cm
—
���/8 "�8.�6 cm
—
3 3/4 " 9.53 cm
—
Overall Bottom Length: 6' 8 �/8" (�03.5� cm)
Tip-to-tip Deck Length: 6' 7 �/8" (�00.98 cm)
Maximum Width: �� �5/�6" (55.7� cm)
Maximum Thickness: � �5/�6" (7.46 cm)
Displacement: Forthcoming
History: Introduced July �006
Rockers: Natural
Shaper's Comments:
I have listened to many people over the years on this one
blank. This newly made 6’7”A blank was lengthened to net
a 6’7” bottom length. I re-designed the rail shape for less
waste and stronger foam, and I also widened the nose @
��” by �’ �/�”, the wide point by �/�”, and the tail @ ��” by
�”, as to be a more useful blank in this size range. The new
natural rocker in this mold design is the popular 6’7”A
+�/�” nose, +�/4” tail. This rocker being shaped in instead
of glued up, will allow for a much more accurate finished
rocker, due to no “spring back”. I have the old 6’7”A natural
rocker if anyone still wants it. All the “A” series blanks are
designed to take the majority of thickness off the bottom,
leaving small adjustments in the nose and tail rocker and
their thicknesses. This blank can be ordered wider or nar-
rower as to allow for stronger decks/rails near the perimeter
of the board outline, and less waste.
![Page 10: USBlanks - Foam E-Z Blanks Product... · USBlanks 4-USBlanks 4-USBlanks 4-Product Catalog Phone: (310) 225-6774 Fax: (310) 225-6922 E-Mail: info@usblanks.com Printed August 15, 2006](https://reader033.fdocuments.us/reader033/viewer/2022051900/5fef2e6ecc09a25be32f350a/html5/thumbnails/10.jpg)
9
BlanksUS TM 6'8"EA
Designed and shaped by: Eric Arakawa
6"
�� "
�8 "
�4 "
�4 "
�8 "
�� "
6"
Center
36 "
36 "
5 �/4 "—�3.34 cm
3 3/�6"— 8.�0 cm
��3/�6"— 4.80 cm
�"— �.54 cm
�5/3�"— �.�9 cm
�/3�"— 0.08 cm
�/3�"— 0.08 cm
3/8 "— 0.95 cm
��/�6"— �.75 cm
� �/8 "— �.86 cm
� �/�6"— �.70 cm
� 3/8 "— 6.03 cm
7/8 " �.�� cm
—
� 5/�6" 3.33 cm
—
��3/�6" 4.60 cm
—
� �/4 " 5.7� cm
—
� �/� " 6.35 cm
—
� 7/8 " 7.30 cm
—
� 7/8 " 7.30 cm
—
��3/�6" 7.�4 cm
—
� 9/�6" 6.5� cm
—
� 7/�6" 6.�9 cm
—
� " 5.08 cm
—
� 9/�6" 3.97 cm
—
� �/4 " 3.�8 cm
—
4 �/4 "�0.80 cm
—
��5/8 "3�.07 cm
—
�57/8 " 40.3� cm
—
�75/8 "44.77 cm
—
�97/8 "50.48 cm
—
��3/8 "54.�9 cm
—
���/� "54.6� cm
—
��3/8 "54.�9 cm
—
�99/�6"46.69 cm
—
�8�/8 "46.04 cm
—
�45/8 "37.�5 cm
—
�03/4 "�3.�9 cm
—
7 �/� "�9.05 cm
—
Overall Bottom Length: 6' 8 �/�" (�04.47 cm)
Tip-to-tip Deck Length: 6' 7 �/�" (�0�.93 cm)
Maximum Width: �� �/�" (54.6� cm)
Maximum Thickness: � �5/�6" (7.46 cm)
Displacement: Forthcoming
History: Introduced July �006
Rockers: Natural
Shaper's Comments: This fills the gap between
the 6’3” EA and the 6’9” EA.
![Page 11: USBlanks - Foam E-Z Blanks Product... · USBlanks 4-USBlanks 4-USBlanks 4-Product Catalog Phone: (310) 225-6774 Fax: (310) 225-6922 E-Mail: info@usblanks.com Printed August 15, 2006](https://reader033.fdocuments.us/reader033/viewer/2022051900/5fef2e6ecc09a25be32f350a/html5/thumbnails/11.jpg)
�0
BlanksUS TM 6'8"P
Designed and shaped by: Timmy Patterson
6"
�� "
�8 "
�4 "
�4 "
�8 "
�� "
6"
Center
5 �/4 "—�3.34 cm
3 3/�6"— 8.�� cm
� 7/8 "—4.76 cm
� �/�6"— �.70 cm
�/� "— �.�7 cm
7/�6"— �.�� cm
3/4 "— �.9� cm
� �/8 "— �.86 cm
� 5/8 "— 4.�3 cm
� �/8 "— 5.40 cm
� 5/�6" �.79 cm
—
� 3/�6" 3.0� cm
—
���/�6" �.69 cm
—
� �/�6" 5.�4 cm
—
� 3/8 " 6.03 cm
—
� 3/4 " 6.99 cm
—
� 7/�6" 6.�9 cm
—
� 3/�6" 5.56 cm
—
� 7/8 " 4.76 cm
—
� �/� " 3.8� cm
—
� " �.54 cm
—
4 �/� " ��.43 cm
—
�0�/� "�6.67 cm
—
�4�/� "36.83 cm
—
�7�/4 "43.8� cm
—
�9�/4 "48.90 cm
—
��3/8 "54.�9 cm
—
�93/4 "50.�7 cm
—
�83/�6" 46.�9 cm
—
�5��/�6"39.85 cm
—
���/�6"30.64 cm
—
6 �/� "�6.5� cm
—
Overall Bottom Length: 6' 8" (�03.�0 cm)
Tip-to-tip Deck Length: 6' 7" (�00.66 cm)
Maximum Width: �� 3/8" (54.�9 cm)
Maximum Thickness: � 3/4" (6.99 cm)
Displacement: Forthcoming
History: Introduced July �006
Rockers: Natural
Shaper's Comments: Blank is designed for team
boards and production shaping. It has slightly
adjusted dimensions from the 6’7”P. A medium
tolerance blank.
![Page 12: USBlanks - Foam E-Z Blanks Product... · USBlanks 4-USBlanks 4-USBlanks 4-Product Catalog Phone: (310) 225-6774 Fax: (310) 225-6922 E-Mail: info@usblanks.com Printed August 15, 2006](https://reader033.fdocuments.us/reader033/viewer/2022051900/5fef2e6ecc09a25be32f350a/html5/thumbnails/12.jpg)
��
BlanksUS TM 6'9"EA
Designed and shaped by: Eric Arakawa
Overall Bottom Length: 6' 9 3/8" (�06.69 cm)
Tip-to-tip Deck Length: 6' 8 �/�" (�04.47 cm)
Maximum Width: �� 3/8" (54.�9 cm)
Maximum Thickness: � �5/�6" (7.46 cm)
Displacement: Forthcoming
History: Introduced July �006
Rockers: Natural
Shaper's Comments: This blank is designed to
yield most modern short board designs. The
thicker nose and tail give it added versatility for
machining. I designed the rocker and foil to ac-
commodate low and full rocker designs.
6"
�� "
�8 "
�4 "
�4 "
�8 "
�� "
6"
Center
36 "
36 "
5 9/�6"—�4.�3 cm
3 3/8 "— 8.57 cm
� �5/�6"— 4.9� cm
� 3/3�"— �.78 cm
�7/3�"— �.35 cm
�/3�"— 0.08 cm
�/�6"— 0.�6 cm
7/�6"— �.�� cm
�5/3�"— �.98 cm
� 7/3�"— 3.�0 cm
� 3/4 "— 4.45 cm
� �/� "— 6.35 cm
7/8 " �.�� cm
—
� �/4 " 3.�8 cm
—
� 3/4 " 4.45 cm
—
� 3/�6" 5.56 cm
—
� �/� " 6.35 cm
—
� 7/8 " 7.30 cm
—
� 7/8 " 7.30 cm
—
� 7/8 " 7.30 cm
—
� 5/8 " 6.67 cm
—
� 3/8 " 6.03 cm
—
� " 5.08 cm
—
� 5/8 " 4.�3 cm
—
� �/8 " �.86 cm
—
4 " �0.�6 cm
—
��3/8 " 3�.43 cm
—
�55/8 " 39.69 cm
—
�7�/�6" 43.34 cm
—
�95/8 " 49.85 cm
—
���/4 " 53.98 cm
—
��3/8 " 54.�9 cm
—
��3/�6" 53.8� cm
—
�9�/8 " 48.58 cm
—
�77/8 " 45.40 cm
—
�43/8 " 36.5� cm
—
�03/8 " �6.35 cm
—
7 �/4 " �8.4� cm
—
![Page 13: USBlanks - Foam E-Z Blanks Product... · USBlanks 4-USBlanks 4-USBlanks 4-Product Catalog Phone: (310) 225-6774 Fax: (310) 225-6922 E-Mail: info@usblanks.com Printed August 15, 2006](https://reader033.fdocuments.us/reader033/viewer/2022051900/5fef2e6ecc09a25be32f350a/html5/thumbnails/13.jpg)
��
BlanksUS TM 6'10"A
Designed and shaped by: Pat Rawson
Overall Bottom Length: 6' �0 7/�6" (�09.39 cm)
Tip-to-tip Deck Length: 6' 9 ��/�6" (�07.49 cm)
Maximum Width: �4 �/8" (6�.�8 cm)
Maximum Thickness: 3 �/�" (8.89 cm)
Displacement: Forthcoming
History: Introduced July �006
Rockers: Natural
Shaper's Comments: This is the 6’9”A mold de-
sign again…same everything! This blank can
be ordered wider or narrower as to allow for
stronger decks/rails near the perimeter of the
board outline, and less waste.
6"
�� "
�8 "
�4 "
�4 "
�8 "
�� "
6"
Center
5 3/�6"—�3.�8 cm
3 �/4 "—9.53 cm
� "—5.08 cm
� 3/�6"—3.0� cm
5/8 "— �.59 cm
�/�6"— 0.�6 cm
3/64"—0.�� cm
7/�6"—�.�� cm
3/4 "—�.9� cm
� �/3�"—�.6� cm
� �/� "—3.8� cm
� "— 5.08 cm
� 3/8 "3.49 cm
—
� 7/8 "4.76 cm
—
� 3/8 "6.03 cm
—
� 7/8 "7.30 cm
—
3 �/8 "7.94 cm
—
3 �/� "8.89 cm
—
3 7/�6"8.73 cm
—
3 3/8 "8.57 cm
—
3 "7.6� cm
—
� 3/4 "6.99 cm
—
� 3/8 "6.03 cm
—
� 7/�6" 3.65 cm
—
� �/� " 3.8� cm
— �� "30.48 cm
—
�53/4 "40.0� cm
—
�8�/8 "46.04 cm
—
�0�/�6"50.96 cm
—
��3/4 "55.�5 cm
—
�33/4 "60.33 cm
—
�4�/�6"6�.�� cm
—
�4�/�6"6�.�� cm
—
��7/8 "58.�0 cm
—
��3/8 "54.�9 cm
—
�9�/�6"48.4� cm
—
�5�/�6"38.�6 cm
—
8 "�0.3� cm
—
36 "
36 "
![Page 14: USBlanks - Foam E-Z Blanks Product... · USBlanks 4-USBlanks 4-USBlanks 4-Product Catalog Phone: (310) 225-6774 Fax: (310) 225-6922 E-Mail: info@usblanks.com Printed August 15, 2006](https://reader033.fdocuments.us/reader033/viewer/2022051900/5fef2e6ecc09a25be32f350a/html5/thumbnails/14.jpg)
�3
BlanksUS TM 7'0"A
Designed and shaped by: Pat Rawson
6"
�� "
�8 "
�4 "
�4 "
�8 "
�� "
6"
Center
36 "
36 "
5 5/8 "— 5.63 cm
3 �/8 "— 7.94 cm
� 3/4 "— 4.45 cm
�5/�6"— �.38 cm
�/� "— �.�7 cm
�/�6"— 0.�6 cm
3/3�"— 0.�4 cm
7/�6"— �.�� cm
3/4 "— �.9� cm
� 3/3�"— �.78 cm
� �5/3�"— 3.73 cm
� �/�6"— 5.�4 cm
�" �.54 cm
—
� 9/�6" 3.97 cm
—
� �/�6" 5.�4 cm
—
� �/� " 6.35 cm
—
� �3/�6" 7.�4 cm
—
3 3/�6" 3.�9 cm
—
3 �/4 " 8.�6 cm
—
3 �/8 " 7.94 cm
—
� �3/�6" 7.�4 cm
—
� �/� " 6.35 cm
—
� 3/4 " 5.56 cm
—
� 7/8 " 4.76 cm
—
� 3/8 " 3.49 cm
—
4 5/8 " ��.75 cm
—
��7/�6" �9.05 cm
—
�55/8 " 39.69 cm
—
�83/8 " 46.67 cm
—
�0�/8 " 5�.�� cm
—
��7/8 " 55.56 cm
—
���/�6" 56.04 cm
—
���/�6" 53.50 cm
—
�95/8 " 49.85 cm
—
�77/8 " 45.40 cm
—
�53/4 " 40.00 cm
—
��3/4 " 3�.39 cm
—
8 �/� " ��.59 cm
—
Overall Bottom Length: 7' 3/�6" (��3.84 cm)
Tip-to-tip Deck Length: 6' �� �/8" (���.�4 cm)
Maximum Width: �� �/8" (56.�0 cm)
Maximum Thickness: 3 �/4" (8.�6 cm)
Displacement: Forthcoming
History: Introduced July �006
Rockers: Natural
Shaper's Comments:
This newly made 7’0”A blank is the original 6’��’A lengthened
to net a 6’�� bottom length. I re-designed the rail shape for
less waste and stronger foam, and I also widened the nose
@ ��” by � �/�”, the wide point by �/4”, and the tail @ ��” by
�”, as to be a more useful blank in this size range. The new
natural rocker in this mold design is the popular 7’0”A +�/�”
nose, +�/�” tail. This rocker being shaped in instead of glued
up, will allow for a much more accurate finished rocker, due
to no “spring back”. We have the old 6’��”A natural rocker if
anyone still wants it. All the “A” series blanks are designed
to take the majority of thickness off the bottom, leaving
small adjustments in the nose and tail rocker and their
thicknesses. This blank can be ordered wider or narrower
as to allow for stronger decks/rails near the perimeter of the
board outline, and less waste.
![Page 15: USBlanks - Foam E-Z Blanks Product... · USBlanks 4-USBlanks 4-USBlanks 4-Product Catalog Phone: (310) 225-6774 Fax: (310) 225-6922 E-Mail: info@usblanks.com Printed August 15, 2006](https://reader033.fdocuments.us/reader033/viewer/2022051900/5fef2e6ecc09a25be32f350a/html5/thumbnails/15.jpg)
�4
BlanksUS TM 7'1"A
6"
�� "
�8 "
�4 "
�4 "
�8 "
�� "
6"
Center
36 "
36 "
5 ��/�6"—�4.45 cm
3 �/� "—8.89 cm
� 3/3�"—5.3� cm
� �/4 "— 3.�8 cm
��/�6"— �.75 cm
3/3�"— 0.�4 cm
�/�6"— 0.�6 cm
�3/3�"— �.03 cm
��/3�"— �.66 cm
� �/�6"— �.70cm
� �7/3�"— 3.89 cm
� "— 5.40 cm
� �/8 " �.86 cm
—
� 3/4 "4.45 cm
—
� 3/�6" 5.56 cm
—
� �/� " 6.35 cm
—
� 3/4 " 6.99 cm
—
3 " 7.6� cm
—
3 " 7.6� cm
—
��5/�6" 7.46 cm
—
� 5/8 " 6.67 cm
—
� �/� " 6.35 cm
—
� �/8 " 5.40 cm
—
��3/�6" 4.60 cm
—
� 5/�6" 3.33 cm
— 9 "��.86 cm
—
����/�6"3�.�3 cm
—
�55/8 "39.69 cm
—
�7�3/�6"45.�4 cm
—
�99/�6"44.69
—
��3/4 "55.�5 cm
—
��3/�6"56.36 cm
—
���/�6"56.04 cm
—
�03/�6"5�.�8 cm
—
�83/8 " 46.67 cm
—
�5�/� "39.37 cm
—
���/8 " �8.�6 cm
—
4 �/� " ��.43 cm
—
�/8
Designed and shaped by: Pat Rawson
Overall Bottom Length: 7' �" (��6.�� cm)
Tip-to-tip Deck Length: 7' 0" (��3.36 cm)
Maximum Width: �� �/4" (56.5� cm)
Maximum Thickness: 3 �/�6" (7.78 cm)
Displacement: Forthcoming
History: Introduced July �006
Rockers: Natural
Shaper's Comments:
This newly made 7’�”A blank is the original 7’0”A lengthened
to net a 7’0 bottom length. I re-designed the rail shape for
less waste and stronger foam, and I also widened the nose
@ ��” by �”, the wide point by 3/4”, and the tail @ ��” by �”,
as to be a more useful blank in this size/volume range. The
new natural rocker in this mold design is the popular 70A
+�/�” nose, +�/�” tail. This rocker being shaped in instead
of glued up, will allow for a much more accurate finished
rocker, due to no “spring back”. We have the old 7’0”A natural
rocker if anyone still wants it. All the “A” series blanks are
designed to take the majority of thickness off the bottom,
leaving small adjustments in the nose and tail rocker and
their thicknesses. This blank can be ordered wider or nar-
rower as to allow for stronger decks/rails near the perimeter
of the board outline, and less waste.
![Page 16: USBlanks - Foam E-Z Blanks Product... · USBlanks 4-USBlanks 4-USBlanks 4-Product Catalog Phone: (310) 225-6774 Fax: (310) 225-6922 E-Mail: info@usblanks.com Printed August 15, 2006](https://reader033.fdocuments.us/reader033/viewer/2022051900/5fef2e6ecc09a25be32f350a/html5/thumbnails/16.jpg)
�5
BlanksUS TM 7'1"EA
6"
�� "
�8 "
�4 "
�4 "
�8 "
�� "
6"
Center
36 "
36 "
5 7/�6"—�3.8� cm
3 3/8 "—8.57 cm
�"— 5.08 cm
� �/8 "— �.86 cm
7/�6"— �.�� cm
3/3�"— 0.�4 cm
�/�6"— 0.�6 cm
�/�6"— 0.�6 cm
��/�6"— �.75 cm
� �/�6"— �.70 cm
� 5/8 "— 4.�3 cm
� 7/�6"— 6.�9 cm
3 / 4 " �.9� cm
—
� 3/8 " 3.49 cm
—
� 7/8 " 4.76 cm
—
� �/8 " �.86 cm
—
7/�6" �.�� cm
—
��5/�6" 7.46 cm
—
3 " 7.6� cm
—
��5/�6" 7.46 cm
—
� ��/�6" 6.83 cm
—
� 7/�6" 6.�9 cm
—
� �/8 " 5.40 cm
—
� 5/8 " 4.�3 cm
—
�" �.54 cm
— 6 "�5.�4 cm
—
��7/�6"3�.59 cm
—
�6 � / 4 "4�.�8 cm
—
�8��/�6" 47.47 cm
—
�09/�6" 5�.�3 cm
—
��7/�6" 56.99 cm
—
����/�6" 57.63 cm
—
��7/�6"56.99 cm
—
�09/�6" 5�.�3 cm
—
�8 5 / 8 " 47.3� cm
—
�5 7 / 8 " 40.3� cm
—
���/4 " �8.58 cm
—
3 �/4 " 8.�6 cm
—
Designed and shaped by: Eric Arakawa
Overall Bottom Length: 7' � �/8" (��6.�� cm)
Tip-to-tip Deck Length: 7' 3/�6" (��3.84 cm)
Maximum Width: �� ��/�6" (57.63 cm)
Maximum Thickness: 3" (7.6� cm)
Displacement: Forthcoming
History: Introduced July �006
Rockers: Natural
Shaper's Comments: This is the shorter version
of the 7’4” EA.
![Page 17: USBlanks - Foam E-Z Blanks Product... · USBlanks 4-USBlanks 4-USBlanks 4-Product Catalog Phone: (310) 225-6774 Fax: (310) 225-6922 E-Mail: info@usblanks.com Printed August 15, 2006](https://reader033.fdocuments.us/reader033/viewer/2022051900/5fef2e6ecc09a25be32f350a/html5/thumbnails/17.jpg)
�6
BlanksUS TM 7'3"A 6"
�� "
�8 "
�4 "
�4 "
�8 "
�� "
6"
Center
36 "
36 "
5 �/� "—�3.97 cm
3 �/� "— 8.89 cm
� �/4 "— 5.7� cm
� 7/�6"— 3.65 cm
�5/3�"— �.98 cm
�/8 "— 0.3� cm
3/3�"— 0.�4 cm
�7/3�"— �.35 cm
�3/�6"— �.54 cm
� 7/3�"— 3.�0 cm
� 5 / 8 "— 4.�3 cm
� � / 8"— 5.40 cm
� 3/8 "3.49 cm
—
� 7/8 " 4.76 cm
—
� 7/�6" 6.�9 cm
—
� 7/8 " 7.30 cm
—
3 �/4 " 8.�6 cm
—
3 5/8 " 9.�� cm
—
3 5/8 " 9.�� cm
—
3 " 8.89 cm
—
3 " 7.6� cm
—
� 3/4 "6.99 cm
—
� 3/8 " 6.03 cm
—
��5/�6" 4.9� cm
—
� �/� " 3.8� cm
—
7 3/8 "�8.73 cm
—
�45/8 "37.�5 cm
—
�89/�6"47.�5 cm
—
���/�6"53.50 cm
—
��9/�6"57.3� cm
—
�4�/�6"6�.38 cm
—
�4�/�6"6�.38 cm
—
�3�/� "59.69 cm
—
��3/8 "54.�9 cm
—
�9�3/�6"50.3� cm
—
�73/4 "45.09 cm
—
�5�/�6"38.5� cm
—
��" �7.94 cm
—
�/�
Designed and shaped by: Pat Rawson
Overall Bottom Length: 7' 3 9/�6" (���.4� cm)
Tip-to-tip Deck Length: 7' � 3/4" (��0.35 cm)
Maximum Width: �4 3/�6" (6�.44 cm)
Maximum Thickness: 3 5/8" (9.�� cm)
Displacement: Forthcoming
History: Introduced July �006
Rockers: Natural
Shaper's Comments: This is my enlarged ver-
sion of the 6’9”A fish blank. I designed this one
as to be able to easily net a 7’3” by the bottom
measurement. Bottom rocker is a longer version
of the natural rocker of the 6’9”A I made in �00�.
I basically “blew up” the 6’9”A concept for this
mold design. This blank can be ordered wider
or narrower as to allow for stronger decks/rails
near the perimeter of the board outline, and
less waste.
![Page 18: USBlanks - Foam E-Z Blanks Product... · USBlanks 4-USBlanks 4-USBlanks 4-Product Catalog Phone: (310) 225-6774 Fax: (310) 225-6922 E-Mail: info@usblanks.com Printed August 15, 2006](https://reader033.fdocuments.us/reader033/viewer/2022051900/5fef2e6ecc09a25be32f350a/html5/thumbnails/18.jpg)
�7
BlanksUS TM 7'5"A 6"
�� "
�8 "
�4 "
�4 "
�8 "
�� "
6"
Center
36 "
36 "
6 �/8 "—�5.58 cm
3 9/�6"— 9.05 cm
� �/�6"— 5.�4 cm
� �/4 "— 3.�8 cm
5/8 "— �.59 cm
3/3�"— 0.�4 cm
�/8 "— 0.3� cm
9/�6"— �.43 cm
3/4 "— �.9� cm
� �/4 "—3.�8 cm
� ��/�6"—4.�9 cm
� 3/�6"—5.57 cm
7/8 " �.54 cm
—
� �/� " 3.8� cm
—
� " 5.08 cm
—
� 3/8 " 6.03 cm
—
� 5/8 " 6.67 cm
—
��5/�6" 7.46 cm
—
3 " 7.6� cm
—
� 7/8 " 7.30 cm
—
� 9/�6" 6.5� cm
—
� 3/8 " 6.03 cm
—
� �/�6" 5.�4 cm
—
� 3/4 " 4.45 cm
—
� 3/8 " 3.49 cm
— 8 �/� " ��.59 cm
—
����/�6"3�.�3 cm
—
�53/8 "39.05 cm
—
�7�/� "44.45 cm
—
�93/�6"48.74 cm
—
��3/8 " 54.�9 cm
—
��" 55.88 cm
—
��3/4 " 55.�5 cm
—
�9�3/�6" 50.3� cm
—
�8�/�6"45.88 cm
—
�55/�6"38.89 cm
—
���/4 "�8.58 cm
—
4 3/4 "��.07 cm
—
Designed and shaped by: Pat Rawson
Overall Bottom Length: 7' 5 �/�6" (��6.�� cm)
Tip-to-tip Deck Length: 7' 3 7/8" (��3.�0 cm)
Maximum Width: �� �/�6" (56.04 cm)
Maximum Thickness: 3" (7.6� cm)
Displacement: Forthcoming
History: Introduced July �006
Rockers: Natural
Shaper's Comments:
This newly made 7’5A” blank is the original 7’3”A lengthened
to easily net a 7’4” bottom length. I re-designed the rail shape
for less waste and stronger foam, and I also widened the
nose @ ��” by �”, the wide point by 3/8”, and the tail @ ��”
by �”, as to be a more useful blank in this size/volume range.
The new natural rocker in this mold design is the 7’3”A +�/�”
nose, +3/8” tail. This rocker being shaped in instead of glued
up, will allow for a much more accurate finished rocker, due
to no “spring back”. We have the old 7’3”A natural rocker if
anyone still wants it. All the “A” series blanks are designed
to take the majority of thickness off the bottom, leaving
small adjustments in the nose and tail rocker and their
thicknesses. This blank can be ordered wider or narrower
as to allow for stronger decks/rails near the perimeter of the
board outline, and less waste.
![Page 19: USBlanks - Foam E-Z Blanks Product... · USBlanks 4-USBlanks 4-USBlanks 4-Product Catalog Phone: (310) 225-6774 Fax: (310) 225-6922 E-Mail: info@usblanks.com Printed August 15, 2006](https://reader033.fdocuments.us/reader033/viewer/2022051900/5fef2e6ecc09a25be32f350a/html5/thumbnails/19.jpg)
�8
BlanksUS TM 7'6"EA
Designed and shaped by: Eric Arakawa
6"
�� "
�8 "
�4 "
�4 "
�8 "
�� "
6"
Center
36 "
36 "
5 9/�6"—�4.�3 cm
3 7/�6"—8.73 cm
� �/�6"—5.�4 cm
� �/4 "—3.�8 cm
��/�6"—�.75 cm
�/8 "—.3� cm
�/8 “.3� cm
9/�6"—�.43 cm
�9/3�“�.30 cm
� 9/3�"—3.�6 cm
� �5/3�"—4.53 cm
� 7/�6"—6.�9 cm
� �/8 "�.86 cm
—
� �/� "3.8� cm
—
� �/�6"5.�4 cm
—
� �/� "6.35cm
—
� 3/4 "6.99 cm
—
3 �/8 "7.94 cm
—
3 3/�6"8.�0 cm
—
3 �/�6"7.78 cm
—
� 3/4 "6.99 cm
—
� 7/�6"6.�9 cm
—
� �/8 "5.40 cm
—
� 3/4 "4.45 cm
—
� 7/�6"3.65 cm
— 6 5/8 "�6.83 cm
—
���/8 "30.80 cm
—
�6 3/�6"4�.�� cm
—
�8 9/�6"47.�5 cm
—
�0 3/8 "5�.75 cm
—
�� 9/�6"57.3� cm
—
�3 �/8 "58.74 cm
—
�� 3/4 "57.79 cm
—
�0 3/4 "50.7� cm
—
�8 3/4 "47.63 cm
—
�5��/�6"39.85 cm
—
���/�6"�8.�0 cm
—
� 7/8 “7.30 cm
—
Overall Bottom Length: 7' 6 5/8" (�30.�0 cm)
Tip-to-tip Deck Length: 7' 5 ��/�6" (��7.8� cm)
Maximum Width: �3 �/8" (58.74 cm)
Maximum Thickness: 3 3/�6" (8.�0 cm)
Displacement: Forthcoming
History: Introduced July �006
Rockers: Natural
Shaper's Comments: This is primarily designed
for making fun boards. It comes with a moder-
ate but continuous even rocker and foil to make
“positioning” the blank for the shape process
easy.
![Page 20: USBlanks - Foam E-Z Blanks Product... · USBlanks 4-USBlanks 4-USBlanks 4-Product Catalog Phone: (310) 225-6774 Fax: (310) 225-6922 E-Mail: info@usblanks.com Printed August 15, 2006](https://reader033.fdocuments.us/reader033/viewer/2022051900/5fef2e6ecc09a25be32f350a/html5/thumbnails/20.jpg)
�9
BlanksUS TM 7'7"A
Designed and shaped by: Pat Rawson
6"
�� "
�8 "
�4 "
�4 "
�8 "
�� "
6"
Center
36 "
6 �/8 "—�5.56 cm
4 "—�0.�6 cm
� 9/�6"—6.5� cm
� 5/8 "—4.�3 cm
�5/�6"—�.38 cm
3/�6"—.48 cm
�/8 "—.3� cm
9/�6"—�.43 cm
7/8 "—�.�� cm
� �/4 "—3.�8 cm
� ��/�6"—4.�9 cm
� �/4 "—5.7� cm
� 3/8 "3.50 cm
—
� 3/4 "4.45 cm
—
� �/4 "5.7� cm
—
� ��/�6"6.83 cm
—
3 "7.6� cm
—
3 3/8 "8.58 cm
—
3 7/�6"8.73 cm
—
3 �/4 "8.�6 cm
—
� 7/8 "7.30 cm
—
� 9/�6"6.5� cm
—
� �/4 "5.7� cm
—
� 7/8 "4.76 cm
—
� 7/�6"3.65 cm
—
4 3/4 "��.07 cm
—
�� "30.48 cm
—
�6 3/8"4�.59 cm
—
�9�/�6"48.4� cm
—
�0�5/�6"53.�8 cm
—
���3/�6"57.94 cm
—
�3�/�6"58.58 cm
—
���/4 "56.5� cm
—
�0�/�6"50.96 cm
—
�8�/4 "46.36 cm
—
�6�/4 "4�.�8 cm
—
�3�/� "34.�9 cm
—
9 3/4 "�4.77 cm
—
36 "
Overall Bottom Length: 7' 7 �/4" (�3�.78 cm)
Tip-to-tip Deck Length: 7' 6 3/�6" (��9.08 cm)
Maximum Width: �3 �/8" (58.74 cm)
Maximum Thickness: 3 7/�6" (8.73 cm)
Displacement: Forthcoming
History: Introduced July �006
Rockers: Natural
Shaper's Comments:
This newly made 7’7”A blank is the original 7’5”A
lengthened to easily net a 7’6” bottom length. I re-
designed the rail shape for less waste and stronger
foam and also widened the nose @ ��” by �”, the
wide point by �”, and the tail @ ��” by �”, as to be a
more useful blank in this size/volume range. The new
natural rocker in this mold design is the 7’5”A +�/�”
nose, +3/8” tail. This rocker being shaped in instead
of glued up, will allow for a much more accurate
finished rocker, due to no “spring back”. We have the
old 7’5”A natural rocker if anyone still wants it. All the
“A” series blanks are designed to take the majority of
thickness off the bottom, leaving small adjustments
in the nose and tail rocker and their thicknesses. This
blank can be ordered wider or narrower as to allow for
stronger decks/rails near the perimeter of the board
outline, and less waste.
![Page 21: USBlanks - Foam E-Z Blanks Product... · USBlanks 4-USBlanks 4-USBlanks 4-Product Catalog Phone: (310) 225-6774 Fax: (310) 225-6922 E-Mail: info@usblanks.com Printed August 15, 2006](https://reader033.fdocuments.us/reader033/viewer/2022051900/5fef2e6ecc09a25be32f350a/html5/thumbnails/21.jpg)
�0
BlanksUS TM 7'9"H
Designed and shaped by: Roger Hinds
6"
�� "
�8 "
�4 "
�4 "
�8 "
�� "
6"
Center
36 "
36 "
3 9/�6"—9.05 cm
� 9/�6"—6.5� cm
� 7/8 "—4.76 cm
� 5/�6"—3.33 cm
7/8 "—�.�� cm
3/�6"—.48 cm
�/4 "—.64 cm
7/8 "—�.�� cm
� 5/�6"—3.33 cm
� �3/�6"— 4.60 cm
� 3/8 "—6.03 cm
3 �/�6"—7.79 cm
� �/8 "�.86 cm
—
� 5/8 “4.�3 cm
—
� "5.08 cm
—
� 3/8 "6.03 cm
—
� 9/�6"6.5� cm
—
3 "7.6� cm
—
3 3/�6"8.�0 cm
—
3 �/�6"7.78 cm
—
� 5/8 "6.67 cm
—
� 3/8 "6.03 cm
—
� �/�6"5.�4 cm
—
� ��/�6"4.�9 cm
—
� 3/�6"3.0� cm
— 8 �/� "��.59 cm
—
�3 3/4 "34.93 cm
—
�7 �/8 "43.50 cm
—
�9 �5/�6"50.64 cm
—
��"53.34 cm
—
�� �5/�6 "58.�6 cm
—
�3��/�6 "60.�7 cm
—
�3 5/8 "60.0� cm
—
�� 3/4 "57.79 cm
—
�� 5/8"54.93 cm
—
�9 �5/�6"50.64 cm
—
�6 3/8 "4�.59 cm
—
Overall Bottom Length: 7' 9 5/�6" (�37.0� cm)
Tip-to-tip Deck Length: 7' 8 3/4" (�35.59 cm)
Maximum Width: �3 3/4" (60.33 cm)
Maximum Thickness: 3 3/�6" (8.�0 cm)
Displacement: Forthcoming
History: Introduced July �006
Rockers: Natural
Shaper's Comments: Designed for retro fun-
shapes. Based on feedback from 7’��”H and
8’4”H, improvements were made in the thickness
and foil. Should accomodate many rockers and
be an easy hand or machine shape blank.
![Page 22: USBlanks - Foam E-Z Blanks Product... · USBlanks 4-USBlanks 4-USBlanks 4-Product Catalog Phone: (310) 225-6774 Fax: (310) 225-6922 E-Mail: info@usblanks.com Printed August 15, 2006](https://reader033.fdocuments.us/reader033/viewer/2022051900/5fef2e6ecc09a25be32f350a/html5/thumbnails/22.jpg)
��
BlanksUS TM 8'0"H
Designed and shaped by: Roger Hinds
6"
�� "
�8 "
�4 "
�4 "
�8 "
�� "
6"
Center
36 "
36 "
3 3/4 "—9.53 cm
� 5/8 "—6.67 cm
� 7/8 "—4.76 cm
� 5/�6"—3.33 cm
�3/�6"—�.06 cm
3/�6"—.48 cm
7/3�"—.56 cm
�3/�6"—�.06 cm
��/4 "—3.�8 cm
� �3/3�"—4.37 cm
� ��/3�"—5.95 cm
3 �/8 “7.94 cm
�5/�6"�.38 cm
—
� 3/4 "4.45 cm
—
� �/8 "5.40 cm
—
� 9/�6"6.5� cm
—
� �3/�6"7.�4 cm
—
3 �/4"8.�6 cm
—
3 �/4 "8.57 cm
—
3 �/4 "8.�6 cm
—
� �3/�6"7.�4 cm
—
� �/� "6.35 cm
—
� �/8 "5.40 cm
—
� 3/4 “4.45 cm
—
� 7/�6"3.65 cm
— 6 3/4 "�7.�5 cm
—
���5/�6"3�.86 cm
—
�67/�6"4�.75 cm
—
�87/8 "47.94 cm
—
�05/8 "5�.59 cm
—
��3/4 “57.79 cm
—
�33/4 "60.33 cm
—
�3�/� "59.69 cm
—
�� 5/�6"56.67 cm
—
��3/�6"53.8� cm
—
�9�/4"48.90 cm
—
�5 7/8 "40.3� cm
—
Overall Bottom Length: 8' 0 �3/�6" (�45.90 cm)
Tip-to-tip Deck Length: 8' 0 5/�6" (�44.63 cm)
Maximum Width: �3 �3/�6" (60.48 cm)
Maximum Thickness: 3 3/8" (8.57 cm)
Displacement: Forthcoming
History: Introduced July �006
Rockers: Natural
Shaper's Comments: Designed for retro fun-
shapes. Based on feedback from 7’��”H and
8’4”H, improvements were made in the thickness
and foil. Should accomodate many rockers and
be an easy hand or machine shape blank.
![Page 23: USBlanks - Foam E-Z Blanks Product... · USBlanks 4-USBlanks 4-USBlanks 4-Product Catalog Phone: (310) 225-6774 Fax: (310) 225-6922 E-Mail: info@usblanks.com Printed August 15, 2006](https://reader033.fdocuments.us/reader033/viewer/2022051900/5fef2e6ecc09a25be32f350a/html5/thumbnails/23.jpg)
��
BlanksUS TM 8'1"EA
Designed and shaped by: Eric Arakawa
Overall Bottom Length: 8' � �/�6" (�46.54 cm)
Tip-to-tip Deck Length: 8' 0 �/�6" (�44.00 cm)
Maximum Width: �4 3/�6" (6�.4 cm)
Maximum Thickness: 3 7/�6" (8.73 cm)
Displacement: Forthcoming
History: Introduced July �006
Rockers: Natural
Shaper's Comments: This is the bigger version
of the 7’4” EA. I added width forward to accom-
modate wider noses.
6"
�� "
�8 "
�4 "
�4 "
�8 "
�� "
6"
Center
36 "
36 "
6 �/� "—�6.5� cm
4 7/�6"—��.�7 cm
� �5/�6"—7.46 cm
� �3/�6"—4.60 cm
� �/8 "—�.86 cm
�/4 "—.64 cm
5/3�"—.40 cm
9/�6"—�.43 cm
�5/�6"—�.38 cm
� 3/8 "—3.49 cm
� 7/8 "—4.76 cm
� �/�6"—6.83 cm
�"�.54 cm
—
� 7/�6"3.65 cm
—
� �5/�6"4.9� cm
—
� 3/8"6.03 cm
—
� 7/8 "7.30 cm
—
3 5/�6"8.4� cm
—
3 3/8"8.57 cm
—
3 3/�6"8.�0 cm
—
� 3/4"6.99 cm
—
� �/�"6.35 cm
—
� �/8"5.40 cm
—
� ��/�6"4.�9 cm
—
� 5/�6"3.33 cm
— 7 3/4"�9.69 cm
—
�33/8 "33.97 cm
—
�63/4 "4�.55 cm
—
�9 5/�6"49.05 cm
—
��3/�6"53.8� cm
—
�35/8 "60.0� cm
—
�43/�6"6�.44 cm
—
�35/8“60.0� cm
—
��3/4"55.�5 cm
—
�0"50.8 cm
—
�7�/4"43.8� cm
—
�� 5/�6"3�.�7 cm
—
3 3/8"8.57 cm
—
![Page 24: USBlanks - Foam E-Z Blanks Product... · USBlanks 4-USBlanks 4-USBlanks 4-Product Catalog Phone: (310) 225-6774 Fax: (310) 225-6922 E-Mail: info@usblanks.com Printed August 15, 2006](https://reader033.fdocuments.us/reader033/viewer/2022051900/5fef2e6ecc09a25be32f350a/html5/thumbnails/24.jpg)
�3
BlanksUS TM 8'3"H
Designed and shaped by: Roger Hinds
6"
�� "
�8 "
�4 "
�4 "
�8 "
�� "
6"
Center
36 "
36 "
4 3/�6"—�0.64 cm
3 �/3�“7.70 cm
� 5/3�"—5.48 cm
� 7/�6"—3.65 cm
�5/�6"—�.38 cm
9/3�"—.7� cm
�/4 "—.64 cm
�3/�6"—�.06 cm
���/3�"—3.4� cm
� 7/8 "—4.76 cm
� �7/3�"—6.43 cm
3 5/�6"—8.4� cm
� �/4"3.�8 cm
—
� 5/8"4.�3 cm
—
�"5.08 cm
—
� 3/8"6.03 cm
—
� 3/4"6.99 cm
—
3 �/4"8.�6 cm
—
3 7/�6"8.73 cm
—
3 �/4"8.�6 cm
—
� 7/8"7.30 cm
—
� �/�"5.59 cm
—
� �/�6"5.�4 cm
—
� 5/8"4.�3 cm
—
� �/8"�.86 cm
— 7 5/8 "�9.37 cm
—
��7/8"3�.70 cm
—
�63/8"4�.59 cm
—
�83/4 "47.63 cm
—
�0 9/�6"5�.�3 cm
—
����/�6"57.63 cm
—
�33/4"60.33 cm
—
�33/8"59.37 cm
—
���/8 "56.�0 cm
—
�07/8"53.0�
—
�87/8 "47.94 cm
—
�53/�6"38.58 cm
—
Overall Bottom Length: 8' 3 �/4" (�5�.�0 cm)
Tip-to-tip Deck Length: 8' 3 3/4" (�53.37 cm)
Maximum Width: �3 �3/�6" (60.48 cm)
Maximum Thickness: 3 7/�6" (8.73 cm)
Displacement: Forthcoming
History: Introduced July �006
Rockers: Natural
Shaper's Comments: Designed for retro fun-
shapes. Based on feedback from 7’��”H and
8’4”H, improvements were made in the thickness
and foil. Should accomodate many rockers and
be an easy hand or machine shape blank.
![Page 25: USBlanks - Foam E-Z Blanks Product... · USBlanks 4-USBlanks 4-USBlanks 4-Product Catalog Phone: (310) 225-6774 Fax: (310) 225-6922 E-Mail: info@usblanks.com Printed August 15, 2006](https://reader033.fdocuments.us/reader033/viewer/2022051900/5fef2e6ecc09a25be32f350a/html5/thumbnails/25.jpg)
�4
BlanksUS TM 9'3"Y
Designed and shaped by: Rennie Yater
�4 "
6"
�� "
�8 "
�4 "
�4 "
�8 "
�� "
6"
Center
36 "
48 "
36 "
48 "
4 3/8 "—��.�� cm
3 �/8 "—7.94 cm
� 9/3�"—5.79 cm
� 5/8 "—4.�3 cm
� �/�6"—�.70 cm
3/8 "— 0.95 cm
�/�6"— 0.�6 cm
3/3�"— 0.�4 cm
3/8 "— 0.95 cm
�"— �.54 cm
�0 "—50.80 cm
� �5/�6"—4.9� cm
� 9/�6"—6.5� cm
3 �/� "—8.89 cm
��3/�6" 3.0� cm
—
� " 5.08 cm
—
� 3/8 " 6.03 cm
—
� ��/�6" 6.83 cm
—
� 7/8 " 7.30 cm
—
3 �/4 " 8.�6 cm
—
3 7/�6" 8.73 cm
—
3 �/� " 8.89 cm
—
3 7/�6" 8.73 cm
—
3 �/4 " 8.�6 cm
—
� 7/8 " 7.30 cm
—
� 3/4 " 6.99 cm
—
� 5/�6" 5.87 cm
—
� " 5.08 cm
—
� �/4 " 3.�8 cm
— 9 �/4 "�3.50 cm
—
�4�/� "36.83 cm
—
�73/4 "45.09 cm
—
�0"50.80 cm
—
���/� "54.6� cm
—
�3�/� "59.69 cm
—
�45/8 "6�.55 cm
—
�5�/�6" 63.66 cm
—
�5�/8 " 63.8� cm
—
�4��/�6"6�.7� cm
—
�33/8 "59.37 cm
—
���/4 "56.5� cm
—
�03/4 "5�.7� cm
—
�79/�6"44.6� cm
—
Overall Bottom Length: 9' 3 �5/�6" (�84.3� cm)
Tip-to-tip Deck Length: 9' 3 3/8" (�8�.89 cm)
Maximum Width: �5 �/8" (63.8� cm)
Maximum Thickness: 3 �/�" (8.89 cm)
Displacement: Forthcoming
History: Introduced July �006
Rockers: Natural
Shaper's Comments: The original �0’�’Y was
returned to me and I cleaned it up and the best
side was scanned. That program has been used
to machine cut the 9’3”Y, 9’8”Y, and the �0’8”Y
plugs. The natural rocker is about in the middle
of the demand curve. But remember, the further
you change the natural rocker curve the wider
the wood stringer it needed to hold it from
spring back.
![Page 26: USBlanks - Foam E-Z Blanks Product... · USBlanks 4-USBlanks 4-USBlanks 4-Product Catalog Phone: (310) 225-6774 Fax: (310) 225-6922 E-Mail: info@usblanks.com Printed August 15, 2006](https://reader033.fdocuments.us/reader033/viewer/2022051900/5fef2e6ecc09a25be32f350a/html5/thumbnails/26.jpg)
�5
BlanksUS TM 9'4"B
Designed and shaped by: Bruce Jones
6"
�� "
�8 "
�4 "
�4 "
�8 "
�� "
6"
Center
36 "
36 "
48 "
48 "
4 7/8 "—��.38 cm
3 �/� "—8.89 cm
� �/� "—6.35 cm
� 3/4 "—4.45 cm
� 3/�6"—3.0� cm
7/�6"—�.�� cm
�/�6"—.�6 cm
3/3�"—.�4 cm
7/�6"—�.�� cm
� 3/3�"—�.78 cm
� 5/8 "—4.�3 cm
� �/8 "—5.40 cm
� �5/3�"—7.07 cm
3 5/8 "—9.�� cm
� 3/8"3.49 cm
—
� 5/8"4.�3 cm
—
� "5.08 cm
—
� 3/8"6.03 cm
—
� 5/8"6.67 cm
—
3"7.6� cm
—
3 �/4"8.�6 cm
—
3 �/4“8.�6 cm
—
3 �/4"8.�6 cm
—
3"7.6� cm
—
� 5/8 "6.67 cm
—
� 3/8 "6.03 cm
—
� �/8"5.40 cm
—
� 3/4"4.45 cm
—
� �/�"3.8� cm
—
�7�/8 "43.50 cm
—
�03/8"5�.75 cm
—
���/4 "56.5� cm
—
�3�/�"59.69 cm
—
�47/8"63.�8 cm
—
�5�/8"63.8� cm
—
�4�3/�6"63.0� cm
—
�43/�6"6�.44 cm
—
����/�6"57.63 cm
—
�0 �/4"5�.44 cm
—
�8 5/8"47.3� cm
—
�6 7/�6"4�.75 cm
—
�33/8"33.97 cm
—
7 �/�"#####�9.05 cm#
—
Overall Bottom Length: 9' 4 �/4" (�85.�� cm)
Tip-to-tip Deck Length: 9' 3 5/�6" (�8�.73 cm)
Maximum Width: �5 3/�6" (63.98 cm)
Maximum Thickness: 3 �/4" (8.�6 cm)
Displacement: Forthcoming
History: Introduced July �006
Rockers: Natural
Shaper's Comments: From the original 9’4”B
plug, with thickness added to the tail area of the
deck to make it a more shaper friendly blank,
close tolerance for strength, will net �4” x 3 �/8“.
Bottom rockers from the previous 9’4”B will work
well with this blank.
![Page 27: USBlanks - Foam E-Z Blanks Product... · USBlanks 4-USBlanks 4-USBlanks 4-Product Catalog Phone: (310) 225-6774 Fax: (310) 225-6922 E-Mail: info@usblanks.com Printed August 15, 2006](https://reader033.fdocuments.us/reader033/viewer/2022051900/5fef2e6ecc09a25be32f350a/html5/thumbnails/27.jpg)
�6
BlanksUS TM 9'8"Y
Designed and shaped by: Rennie Yater
6"
�� "
�4 "
36 "
36 "
�4 "
�� "
6"
Center
48 "
4 �/� "—��.43 cm
3 �/4 "—8.�6 cm
� 3/8 "—6.03 cm
� �/8 "—�.86 cm
7/�6"— �.�� cm
3/3�"— 0.�4 cm
�/8 "— 0.38 cm
�9/3�"— �.30 cm
� �/8 "— �.86 cm
� 7/3�"— 5.64 cm
� 3/4 "— 6.99 cm
3 ��/�6"— 9.37 cm
� �/�6" 5.�4 cm
—
� 7/�6" 6.�9 cm
—
� �5/�6" 7.46 cm
—
3 �/4 " 8.�6 cm
—
3 �/� "8.89 cm
—
3 5/8 "9.�� cm
—
3 �/� "8.89 cm
—
3 3/8 "8.57 cm
—
3 " 7.6� cm
—
� �/� " 6.35 cm
—
� �/8 " 5.40 cm
—
9 �/8 "�3.�8 cm
—
�43/8 "36.5� cm
—
�7��/�6"44.93 cm
—
���/� "54.6� cm
—
�35/8 "60.0� cm
—
�43/4 "6�.87 cm
—
�55/�6"64.�9 cm
—
�53/8 "64.45 cm
—
�47/8 "63.�8 cm
—
�3"58.4� cm
—
�0�3/�6"5�.86 cm
—
�77/�6"44.�9 cm
—
48 "
Overall Bottom Length: 9' 9" (�97.�8 cm)
Tip-to-tip Deck Length: 9' 8 �/�" (�95.9� cm)
Maximum Width: �5 7/�6" (64.6� cm)
Maximum Thickness: 3 5/8" (9.�� cm)
Displacement: Forthcoming
History: Introduced July �006
Rockers: Natural
Shaper's Comments: The original �0’�’Y was
returned to me and I cleaned it up and the best
side was scanned. That program has been used
to machine cut the 9’3”Y, 9’8”Y, and the �0’8”Y
plugs. The natural rocker is about in the middle
of the demand curve. But remember, the further
you change the natural rocker curve the wider
the wood stringer it needed to hold it from
spring back.
![Page 28: USBlanks - Foam E-Z Blanks Product... · USBlanks 4-USBlanks 4-USBlanks 4-Product Catalog Phone: (310) 225-6774 Fax: (310) 225-6922 E-Mail: info@usblanks.com Printed August 15, 2006](https://reader033.fdocuments.us/reader033/viewer/2022051900/5fef2e6ecc09a25be32f350a/html5/thumbnails/28.jpg)
�7
BlanksUS TM 9'9"B
Designed and shaped by: Bruce Jones
6"
�� "
�8 "
�4 "
�4 "
�8 "
�� "
6"
Center
36 "
36 "
48 "
48 "
4 7/�6“��.�7 cm
3 ��/3�"—8.49 cm
� �/� "—6.35 cm
� 3/4 "—4.45 cm
� 3/�6"—3.0� cm
�5/3�"—�.�9 cm
7/64"—.�8 cm
3/3�"—.�4 cm
7/�6"—�.�� cm
� 3/�6"—3.0� cm
� 3/4 "—4.45 cm
� 3/8 "—6.03 cm
3 3/�6"—8.�0 cm
4 �/8 "—�0.48 cm
� �/8 "�.86 cm
—
� 3/4 "4.45 cm
—
� �/4 "5.7� cm
—
� 5/8 "6.67 cm
—
3 "7.6� cm
—
3 �/� "8.89 cm
—
3 3/4 "9.53 cm
—
3 ��/�6"9.37 cm
—
3 5/8 "9.�� cm
—
3 3/8 "8.57 cm
—
� �3/�6"7.�4 cm
—
� 9/�6"6/5� cm
—
� 3/�6"5.56 cm
—
� �3/�6"4.60 cm
—
� �/4 "3/�8 cm
—
6 "�5.�4 cm
—
�6�/� "4�.9� cm
—
�0�/�6"50.96 cm
—
�� "55.88 cm
—
�33/�6"58.90 cm
—
�49/�6"6�.39 cm
—
�5"63.5 cm
—
�4�5/�6"63.34 cm
—
�43/8 "6�.9� cm
—
�3 "58.4� cm
—
�0��/�6"5�.55 cm
—
�87/8 "47.94 cm
—
�6�/� "4�.9� cm
—
�03/�6"�5.88 cm
—
7 �/� "�9.05 cm
—
Overall Bottom Length: 9' �0 3/8" (300.67 cm)
Tip-to-tip Deck Length: 9' 9 3/4" (�99.09 cm)
Maximum Width: �5 �/�6" (63.66 cm)
Maximum Thickness: 3 3/4" (9.53 cm)
Displacement: Forthcoming
History: Introduced July �006
Rockers: Natural
Shaper's Comments: Intended for longboard
shapes from 9’�” to 9’6”, this is a close tolerance
blank that will net �4” x 3 �/4 “ maximum dimen-
sions. Natural rocker will make a nice all-around
longboard shape. Rockers from the previous 9’8”
will work well with this blank.
![Page 29: USBlanks - Foam E-Z Blanks Product... · USBlanks 4-USBlanks 4-USBlanks 4-Product Catalog Phone: (310) 225-6774 Fax: (310) 225-6922 E-Mail: info@usblanks.com Printed August 15, 2006](https://reader033.fdocuments.us/reader033/viewer/2022051900/5fef2e6ecc09a25be32f350a/html5/thumbnails/29.jpg)
�8
BlanksUS TM 10'2"B
Designed and shaped by: Bruce Jones
6"
�� "
�8 "
�4 "
�4 "
�8 "
�� "
6"
Center
36 "
36 "
48 "
48 "
4 �3/�6"—��.�� cm
3 5/8 "—9.�� cm
� 5/8 "—6.67 cm
� �5/�6"—4.9� cm
� 5/�6"—3.33 cm
9/�6"—�.43 cm
3/�6"—.48 cm
�/8 "—.3� cm
7/�6"—�.��cm
� �/�6"—�.70 cm
� 9/�6"—3.97 cm
� �/8 "—5.40 cm
� 7/8 "—7.30 cm
3 �3/�6"—9.68 cm
� 3/8 "3.49 cm
—
� 3/4 "4.45 cm
—
� 3/�6"5.56 cm
—
� 5/8 "6.67 cm
—
� 7/8 "7.30 cm
—
3 �/4 "8.�6 cm
—
3 7/�6"8.73 cm
—
3 �/� "8.89 cm
—
3 7/�6"8.73cm
—
3 �/4 "8.�6 cm
—
� 7/8 "7.30 cm
—
� 9/�6"3.97 cm
—
� �/4 "5.7� cm
—
� 3/4 "4.45 cm
—
� 3/8 "3.49 cm
— 9 �/4 "�3.50 cm
—
�4�/4 "36.�0 cm
—
�75/8 "44.77 cm
—
�97/8 "50.48 cm
—
���/� "54.6� cm
—
�39/�6"54.6� cm
—
�43/�6"6�.44 cm
—
�5�/4 "64.�4 cm
—
�5 5/�6"64.�5
—
�4 3/4 "6�.87 cm
—
�3 9/�6"59.85 cm
—
�� 7/�6"56.99 cm
—
�0 7/8 "53.0� cm
—
�7 5/8"44.77 cm
—
Overall Bottom Length: �0' � 7/8" (3��.�0 cm)
Tip-to-tip Deck Length: �0' � 7/8" (309.56 cm)
Maximum Width: �5 3/8" (64.45 cm)
Maximum Thickness: 3 �/�" (8.89 cm)
Displacement: Forthcoming
History: Introduced July �006
Rockers: Natural
Shaper's Comments: Intended for longboard
shapes from 9’8” to �0’0”, this is a close tolerance
blank to net �4” x 3 3/8“ maximum dimensions.
Rockers from the previous �0’�” will work well
with this blank.
![Page 30: USBlanks - Foam E-Z Blanks Product... · USBlanks 4-USBlanks 4-USBlanks 4-Product Catalog Phone: (310) 225-6774 Fax: (310) 225-6922 E-Mail: info@usblanks.com Printed August 15, 2006](https://reader033.fdocuments.us/reader033/viewer/2022051900/5fef2e6ecc09a25be32f350a/html5/thumbnails/30.jpg)
�9
BlanksUS TM 11'3"DOverall Bottom Length: ��' 3 3/8" (343.85 cm)
Tip-to-tip Deck Length: ��' � �/4" (34�.00 cm)
Maximum Width: �7 " (68.58 cm)
Maximum Thickness: 4 7/3�" (�0.7� cm)
Displacement: 5.�96 cubic feet (0.�500 m)
History: Introduced January �990. Has proved
to be as versatile as outlined in comments. Good
proportions for long guns.
Rockers: Natural
Shaper's Comments: “Shaper’s Delight” will
yield an excellently proportioned �0’6”. When
finished, it will easily float persons up to �50 lbs.
An excellent rental board. Nose rocker can be
adjusted up to 6 �/� “ or lowered to 4 �/� “. Tail rocker
can be adjusted up to �” or down �/� “. Excellent
family board. Perfect San Onofre board or for
those crowded days at your favorite point break.
Great for giving lessons. Perfect for noseriding.
May be used for guns with rocker adjustment
and width removed from center prior to gluing.
Suggested minimum thickness: 3/�6 “.
Special note: All rockers for this blank will not
fit on redwood or cedar.
Designed and shaped by: George Downing & Dale Velzy
6"
�� "
�8 "
�4 "
�4 "
�8 "
�� "
6"
Center
5 9/�6"—�4.�3 cm
4 5/�6"—�0.95 cm
3 3/8 "—8.57 cm
� 9/�6"—6.5� cm
� 7/8 "—4.76 cm
7/8 "— �.�� cm
9/3�"— 0.7� cm
5/3�"— 0.40 cm
7/�6"— �.�� cm
� 3/3�"— �.78 cm
� �/� "— 3.8� cm
� 3�/3�"— 5.00 cm
� �7/3�"— 6.43 cm
3 3/�6"— 8.�0 cm
� �/�6" �.70 cm
—
� �5/�6" 4.9� cm
—
� 3/8 " 6.03 cm
—
� �3/�6" 7.�4 cm
—
3 3/�6" 8.�0 cm
—
3 3/4 "9.53 cm
—
4 �/8 " �0.48 cm
—
4 3/�6" �0.64 cm
—
4 �/3�"�0.�4 cm
—
3 �3/�6" 9.68 cm
—
3 3/8 " 8.57 cm
—
3 �/�6" 7.78 cm
—
� 3/4 " 6.99 cm
—
� �/4 " 5.7� cm
—
� 3/8 " 3.49 cm
—
�5 7 / 8 "40.3� cm
—
�9�� / �6 "50.0� cm
—
���/3�"55.96 cm
—
�3 5 / 8 "60.0� cm
—
�5 ��/3�"65.�7 cm
—
�6 5 / 8 " 67.63 cm
—
�7 " 68.58 cm
—
�63/�6" 66.5� cm
—
�4 3 / 4 " 6�.87 cm
—
�� � / 4 "56.5� cm
—
�07/�6"5�.9� cm
—
�7 �� / �6 " 44.93 cm
—
�3 3 / 4 " 34.93 cm
—
7 �/� "�9.05 cm
—
36 "
48 "
36 "
48 "