USA ~, AFICOgreenmoontrading.com/wp-content/uploads/2017/04/HD... · specifications and technology...

4
~, A FICO Arabian Fiberglass Insulation Company Ltd. J.Y. of Zamillndustrial IT Owens Corning Corp. USA (oe) Member of I~ )-~ zamilind~I __ AFICO HD Series Blanket Insulation (HOB) The semi-rigid blankets with densities from 24 to 56 kg/m 3 , 1.5-3.5 lb /ft' are flexible insulation rolls for application over irregularly shaped surfaces where rigidity properties are desired. AFleo HDSeriesBlanket Insulation is intended for use in commercial. Institutional, industrial, agricultural and residential construction as thermal and acoustical insulation for interior, exterior and cavity wall applications, partitions, prefabricated houses, poultry farms, ceilings and as back loading of existing ceiling systems. DESCRIPTION AFleo HD Series Blanket Insulation is a highly efficient, resilient and easy to handle flexible blanket insulation composed of fine, stable and uniformly textured inorganic glass fibers bonded together by a non-water soluble and fire retardant thermosetting and heat resistant resin. It is free from coarse fibers and shot due to its mineral composition. APPLICATION FACING AFleo HD Series Blanket Insulation is available in rolls unfaced or one side laminated with factory-applied KRAFT paper, or Aluminum Foil Reinforced Kraft paper (FRK) or other specific vapor barriers. STANDARD AVAILABLE PRODUCTS Nominal Manufacturing Specifications. Check for availability of other dimensions and densities Density Thickness Thermal Resistance R-Value at 24°( 0.625 0.641 1.282 -1~316- [ 1.351 I 1.429 ----- 1.429 L _1.5_1_5_+ I 1.515 hr·fp·OF /Btu 3.55 (4) 3.64 (4) -1 7.28 (7) 7.47(7) 7.67 (8) 8_11 (8) 8.11 (8) 8.60 (9) 8.60 (9)

Transcript of USA ~, AFICOgreenmoontrading.com/wp-content/uploads/2017/04/HD... · specifications and technology...

Page 1: USA ~, AFICOgreenmoontrading.com/wp-content/uploads/2017/04/HD... · specifications and technology of Owens-Corning Corporation OCF, Toledo, Ohio, U,SA Marketed throughout Saudi Arabia,

~, AFICOArabian Fiberglass Insulation Company Ltd.

J.Y. of Zamillndustrial IT Owens Corning Corp.

USA (oe)

Member of

I~ )-~

zamilind~I __

AFICO HD Series Blanket Insulation (HOB)

The semi-rigid blankets with densitiesfrom 24 to 56 kg/m3, 1.5-3.5 lb/ft' areflexible insulation rolls for applicationover irregularly shaped surfaces whererigidity properties are desired.

AFleo HDSeriesBlanket Insulationis intended for use in commercial.Institutional, industrial, agricultural andresidential construction as thermal andacoustical insulation for interior, exteriorand cavity wall applications, partitions,prefabricated houses, poultry farms,ceilings and as back loading of existingceiling systems.

DESCRIPTION

AFleo HD Series Blanket Insulationis a highly efficient, resilient and easyto handle flexible blanket insulationcomposed of fine, stable and uniformlytextured inorganic glass fibers bondedtogether by a non-water soluble and fireretardant thermosetting and heat resistantresin. It is free from coarse fibers and shotdue to its mineral composition.

APPLICATION

FACING

AFleo HD Series Blanket Insulationis available in rolls unfaced or one sidelaminated with factory-applied KRAFTpaper, or Aluminum Foil Reinforced Kraftpaper (FRK) or other specific vapor barriers.

STANDARD AVAILABLE PRODUCTS

Nominal Manufacturing Specifications.Check for availability of other dimensions and densities

Density ThicknessThermal Resistance

R-Value at 24°(

0.6250.6411.282

-1~316- [

1.351 I1.429

-----1.429

L _1.5_1_5_+I 1.515

hr·fp·OF /Btu

3.55 (4)3.64 (4)

-17.28 (7)7.47(7)7.67 (8)8_11 (8)8.11 (8)8.60 (9)8.60 (9)

Page 2: USA ~, AFICOgreenmoontrading.com/wp-content/uploads/2017/04/HD... · specifications and technology of Owens-Corning Corporation OCF, Toledo, Ohio, U,SA Marketed throughout Saudi Arabia,

AFICO HD Series Blanket InsulationTechnical Data SheetProduct Code: HOB

Performance & Physical Characteristics

Standard Available products

Nominal Manufacturing Specifications.Check for availability of other dimensions

[ ~H~~ES~ WIDTH LENGTH

l_mm~ __:-~~t__i~c~_ ~-i'~~-~~-::~-":i'-:::l ~:i;~I::-.~Il_6~_ r 2 1/2-~ 600 t 23 1- 20 1 65_

~ _ 75 l 3 610 I 24 I 25 J ~2 _ .~

~'__ ;Jo_ 31:2 ~~~~ i :: T ~~ L J1~~~J

150 6 I IJ _ _ _ .J

. Depending on Thickness (r Density

Nominal Thermal ConductivityW/moK or Btu·in/hr·f!2.°F (ASTM c 5l8)"K" or "A" value at mean temperatures

I 0 32 10 50 24 75 50 122 75 167 100 212.Type O( OF O( OF O( OF O( OF O( OF O( OF

l ] ~ I~ ~036 '_0 ~--t~ 038~~74 0040 0 28 ~0~48 0 34 O~~I 041

iO~ ~~5 ~

L 140 ! 0 035 024 0037 026 10039 027 0046 032 0.0551 038 10.061 OA2

I 160 10034 023 0036 025: 0 038 02710044 I 031 0.051, 0.35 0.057' OAO !

L 18~0 ~33 ~ ~35 ~ 02410037 026_ 0 043 ~ 03010 048 03~] 005~~ ~3~ 1200 10032 022 0034 023 10036 025 to 041 028 0.0461 0.32 10.051 0.36:

~ --I 240 10031 021 10032 =0~o..:=.C~~_~~391 02~ 0043 030 0047 033

r320t~o;O~~~3-1-+- O!~ 0 03~ 023 10 037 ~5 jO040' 0-: j ~~4 ~30

I 480 110029 020 0030 021 0031 to 22 10035 024 003710 26 0041 I 029r - +r 560 r~030 ~_ ~00~1 I_~ 0.032 I ~~ 10.036 L0.2410.038 ~.~ J 0~42, 0.29

Tliermal Resistance "R" Value (ASTM ( 167)

"R" is a measure of the resistance to heat flow of a material ofany given thickness.("R" = m2.oK/W or hr·fp·oF /Btu)

T where "T" = ThicknessK and "K" or ""." = Thermal Conductivity

R =

Thermal conductance "t;" Value(ASTM C 518, ASTM C 177)

"C' It is ability of the product to conduct heat.

lC =R

Working Temperature Limitations (ASTM (411)

Operating temperature -4°C to 250°C At excessive temperatures,limited migration of binder may occur in the insulation in contactwith the surface. This is in no way impairs the performance of theinsulation.

Mold Growth (ASTM 0 2020, UL 181)

Does not breed or sustain mold, fungus, bacteria or rodents

Corrosiveness (ASTM C 665)

Chemically inert. Will not cause or accelerate corrosion of steel,stainless steel, copper or aluminum, due to its particular inorganicand mineral composition.

Alkalinity

pH 9

surface Burning Characteristics(ASTM E84, UL 723)

Base glass fiber is non-combustible when tested to ASTM E 84.

Facing FlameSpread

FuelContributed

smokeDeveloped

lOFRK 25 o

Specification Compliance

JlFleO HD Series Blanket Insulation complies with theproperty requirements of the following specifications:

DCl ASTM C 665CHN ll2l-CPD-BA0l36

Vapor Permeability (ASTM E 96 A)

FRK 0.020 PERMKraft l.OO PERM

Page 3: USA ~, AFICOgreenmoontrading.com/wp-content/uploads/2017/04/HD... · specifications and technology of Owens-Corning Corporation OCF, Toledo, Ohio, U,SA Marketed throughout Saudi Arabia,

--------------------------------------~~~-~~----------

~I AFICOArabian Fiberglass Insula lion Company Ltd.

J.Y. of Zamil IndustriallJ Owens Corning Corp.

--------------------------------------------------~--------------------------------------------------------------------

Performance &' Physical CharacteristicsFire Properties

SS 476 PART4 : Non CombustibleB.S. 476 PART5 : IgnitabilityB.S 476 PART6 : Fire PropagationB.S. 476 PART7 : Surface Spread of FlameClass '0' fire rating to the building regulations sections E15

Z-(hannels ---t~It--1'''' r-,

Insulation --t----"'~-<ZI

Compressive Strength

Type 120 140 160 180 200 240 320 480 560

i PSFat 10 %5 5 5 10 10 112 16 25 30I Deformation

I PSF at 25 %10 10 10 15 15 20 60 90 110. Deformation

Gypsum Board --""""""--

Poured (oncrete ---""~-

plaster -----

Puncture Resistan(e (ASTM 0 781)

Aluminum Foil Reinforced Kraft Paper Laminate (FRK): 25 Units

wood Lath

Fiber-ReinforcedTile

sound Absorption Coefficients (ASTM ( 384)cement Block Solid ---Jlt---.3IIIIiiimi~-H=tI!W

Insulation --tt+----"'ti:::::..,;L4

Insulation Sound Absorption Coefficient at Frequencies (HZ)Thickness 125 250 500 1000 2000 NRC

, Flexible, -- 1 T

L2~_mm ( 1in) I 0.14 I 0.27 I 0.53 I 0.69 0.84 0.60,

-1- -

: 50 mm (2in ) 0.22 0.36 0.58 i 0.92 0.94 0.70I

I Semi-Rigid

I 25 mm ( 1in ) 0.09 0.26 I 0.64 -+- 0.90 i 1.10 1 0.70,-- -[50 mm (2in) 0.28 0.80 I 1.12 I 1.18 1.10 1.05

Insulation (avity ---t¥".-... ....•,

Installation Recommendation

AFleo HDSeries Blan_ketInsulation can be installed quicklyand easily in virtually any type of construction.

Between metal studs or Z channels, the insulation can be friction-fit in place while the interior finish is applied. In areas where it willbe applied in heights over 2.5m, supplementary support shouldbe provided to hold the insulation in place while the interior finishis applied.

When applied to masonry walls, the insulation can be fixed byimpaling on pins or other similar attachments and then affixing alocking washer to hold the insulation in place.

For ceiling installations, the insulation is simply laid out on top ofceiling panels or other suspension systems.

cement Block wall ------"'~1"F-Z-(hannels with -----to!.

Gypsum Board

Precast concrete -----I-=l7"..-----I-.(Exterior)

Plaster --~---

Z-(hannel Furring --d::Ir-iI I

Insulation

Wire Mesh

Reinforced (on crete -t----~

Plaster -----~

Page 4: USA ~, AFICOgreenmoontrading.com/wp-content/uploads/2017/04/HD... · specifications and technology of Owens-Corning Corporation OCF, Toledo, Ohio, U,SA Marketed throughout Saudi Arabia,

AFICO HD Series Blanket InsulationTechnical Data SheetProduct code: HOB

--.-~-.--...-------------------------------------------------------------------------------------------------------; MAINTENANCE

No maintenance is required. AFICO HD Series Blanket Insula-tion have a high resistance to accidental damage from knocksand handling during installation and maintenance. Dimensionallystable under varying conditions of temperature and humidity, rotproof odorless, non-hygroscopic and will not sustain vermin orfungus due to its inorganic and mineral compositions.

The product will maintain its thermal properties throughout thelifetime of the construction and will not age. AFICO fiberglassis non toxic and not hazardous to health.

AFleo PRODUCTS PRODUCTS CODE

Acoustical Ceiling PanelsBlanket InsulationHO Series Blanket InsulationBoard InsulationRoof Deck Board Insulation

Cavity wall InsulationPre-engineered Metal Building InsulationFaced Duct WrapDuct LinerDuct Liner BoardMechanical Board Insulation

Heavy Density Pipe InsulationPipe Wrap InsulationThermal Insulating WoolQuiet LinerQuiet Liner Board

ACPBKTHOBBDRI/RDCWIMBIFDW

DLDLBMBD

PIPWITlW

QLQLB

STORAGE

To avoid moisture in the building construction, AFICO insulationproducts stored outside must be kept dry. We recommend AFICOproducts to be always stored in covered and dry areas. AFICO isnot liable for the damage resulting from inadequate utilization,loading and off loading and mishandling of its products.

WARRANTY

For more information call the insulation professionals:See manufacturer's General Terms and Conditions of Sale. AsAFICO and/or OCF has no control over installation design,installation workmanship, accessory materials, or conditionsof application, AFICO and/or OCF does not warrant theperformance or results of any installation containing theirproducts. This warranty disclaimer includes all implied warranties,including the warranties or merchantability and fitness for aparticular purpose.

Arabian Fiberglass Insulation Company AFICO reserves theright to alter product specifications without prior notice, as partof its policy of continued development and improvement. Theinstallation methods described in this leaflet are not compulsory.The choice of materials and methods of fixing are the decisionof the specifier, consultant or contractor, For further informationor advice on specification of products, contact your local salesoffice,

~I }4JAFICOPO. Box 1289, Dammam 31431, Saudi Arabia+96638472901/8471519/8472301+966 3 847 3605info@afico,com,sa

PO. Box 1289, Dammam 31431, Saudi Arabia+966 3 847 2901 /847 1519+966 3 847 [email protected]

PO,Box 251, Riyadh 11411, Saudi Arabia+966 1 472 5555 ext. 5980+966 1 291 0162info@afico,com.sa

PO, Box 7504, jeddah 21472,-Saudi Arabia+966 2 670 0020 ext. 134+9662 671 4566.info@aficocomsa

H.O. & Factory:Tel:Fax:E-mail:

Dammam Office:Tel:Fax:E-mail:

Riyadh Office:Tel:Fax:E-mail:

jeddah office:Tel:Fax:Ernail.

;FJ AVAILABILITY

Manufactured by Arabian Fiberglass Insulation Company,Ltd. AFICO member of Zamillndustrial Co. ZI, with head-quarters and production facilities located in Dammam, SaudiArabia, under license from and utilizing the manufacturingspecifications and technology of Owens-Corning CorporationOCF, Toledo, Ohio, U,SA

Marketed throughout Saudi Arabia, the G.c.c. countries, theMiddle East and the Far East. AFICO products are availabledirectly from as well as through a vast and reliable network oflocal distributors,

Special products are manufactured on request.

Gulf Regional Office: PO, Box 44493, Deira, Dubai, UAE.Tel: +97142941211Fax: +971 4 294 1168E-mail: [email protected]

Export Office: PO. Box 90-284, Jdeidet EI Metn, Beirut - LebanonTel: +961 1 900962Fax: +961 1 900963E-mail: info@aficocomsa

~• www.afico.com.sa+WI [email protected]

Authorized Distributor

Ov..V c,-ef..f..N pvom!se:eke keCL/ek':J_,so/v..ciOfl~ ENERGY SAVING~ ENVIRONMENTALLY FRIENDLYII RECYCLEDMATERIALSII SOLUTION FOR GLOBAL WARMING

AFICO is committed to a greener, cleaner environment. AFICO have responded to thiscall for conservation by increasing the amounts of recycled materials in our products,

Pub No. OS-TDS-(WI Prinled January 2013